blob: 5b1e69ceb6062f2ebf8e49af4f508ac9bc5496f9 [file] [log] [blame]
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
#include <auth.h>
#include <bl_common.h>
#include <debug.h>
#include <platform.h>
#include <platform_def.h>
#include "bl2_private.h"
#if TRUSTED_BOARD_BOOT
#ifdef BL32_BASE
static int bl32_cert_error;
#endif
/*
* Load and authenticate the key and content certificates for a BL3-x image
*
* Parameters:
* key_cert_blob: key certificate blob id (see auth.h)
* key_cert_name: key certificate filename
* cont_cert_blob: content certificate blob id (see auth.h)
* cont_cert_name: content certificate filename
* mem_layout: Trusted SRAM memory layout
* load_addr: load the certificates at this address
*
* Return: 0 = success, Otherwise = error
*/
static int load_cert_bl3x(int key_cert_blob, const char *key_cert_name,
int cont_cert_blob, const char *cont_cert_name,
meminfo_t *mem_layout, uint64_t load_addr)
{
image_info_t image_info;
int err;
/* Load Key certificate */
image_info.h.version = VERSION_1;
err = load_image(mem_layout, key_cert_name, load_addr, &image_info, NULL);
if (err) {
ERROR("Cannot load %s.\n", key_cert_name);
return err;
}
err = auth_verify_obj(key_cert_blob, image_info.image_base,
image_info.image_size);
if (err) {
ERROR("Invalid key certificate %s.\n", key_cert_name);
return err;
}
/* Load Content certificate */
image_info.h.version = VERSION_1;
err = load_image(mem_layout, cont_cert_name, load_addr, &image_info, NULL);
if (err) {
ERROR("Cannot load %s.\n", cont_cert_name);
return err;
}
err = auth_verify_obj(cont_cert_blob, image_info.image_base,
image_info.image_size);
if (err) {
ERROR("Invalid content certificate %s.\n", cont_cert_name);
return err;
}
return 0;
}
/*
* Load and authenticate the Trusted Key certificate the key and content
* certificates for each of the BL3-x images.
*
* Return: 0 = success, Otherwise = error
*/
static int load_certs(void)
{
const uint64_t load_addr = BL31_BASE;
image_info_t image_info;
meminfo_t *mem_layout;
int err;
/* Find out how much free trusted ram remains after BL2 load */
mem_layout = bl2_plat_sec_mem_layout();
/* Load the Trusted Key certificate in the BL31 region */
image_info.h.version = VERSION_1;
err = load_image(mem_layout, TRUSTED_KEY_CERT_NAME, load_addr,
&image_info, NULL);
if (err) {
ERROR("Failed to load Trusted Key certificate.\n");
return err;
}
/* Validate the certificate */
err = auth_verify_obj(AUTH_TRUSTED_KEY_CERT, image_info.image_base,
image_info.image_size);
if (err) {
ERROR("Invalid Trusted Key certificate.\n");
return err;
}
/* Load and validate Key and Content certificates for BL3-x images */
#ifdef BL30_BASE
err = load_cert_bl3x(AUTH_BL30_KEY_CERT, BL30_KEY_CERT_NAME,
AUTH_BL30_IMG_CERT, BL30_CERT_NAME,
mem_layout, load_addr);
if (err) {
ERROR("Failed to verify BL3-0 authenticity\n");
return err;
}
#endif /* BL30_BASE */
err = load_cert_bl3x(AUTH_BL31_KEY_CERT, BL31_KEY_CERT_NAME,
AUTH_BL31_IMG_CERT, BL31_CERT_NAME,
mem_layout, load_addr);
if (err) {
ERROR("Failed to verify BL3-1 authenticity\n");
return err;
}
#ifdef BL32_BASE
/* BL3-2 image is optional, but keep the return value in case the
* image is present but the certificate is missing */
err = load_cert_bl3x(AUTH_BL32_KEY_CERT, BL32_KEY_CERT_NAME,
AUTH_BL32_IMG_CERT, BL32_CERT_NAME,
mem_layout, load_addr);
if (err) {
WARN("Failed to verify BL3-2 authenticity\n");
}
bl32_cert_error = err;
#endif /* BL32_BASE */
err = load_cert_bl3x(AUTH_BL33_KEY_CERT, BL33_KEY_CERT_NAME,
AUTH_BL33_IMG_CERT, BL33_CERT_NAME,
mem_layout, load_addr);
if (err) {
ERROR("Failed to verify BL3-3 authenticity\n");
return err;
}
return 0;
}
#endif /* TRUSTED_BOARD_BOOT */
/*******************************************************************************
* Load the BL3-0 image if there's one.
* If a platform does not want to attempt to load BL3-0 image it must leave
* BL30_BASE undefined.
* Return 0 on success or if there's no BL3-0 image to load, a negative error
* code otherwise.
******************************************************************************/
static int load_bl30(void)
{
int e = 0;
#ifdef BL30_BASE
meminfo_t bl30_mem_info;
image_info_t bl30_image_info;
/*
* It is up to the platform to specify where BL3-0 should be loaded if
* it exists. It could create space in the secure sram or point to a
* completely different memory.
*
* The entry point information is not relevant in this case as the AP
* won't execute the BL3-0 image.
*/
INFO("BL2: Loading BL3-0\n");
bl2_plat_get_bl30_meminfo(&bl30_mem_info);
bl30_image_info.h.version = VERSION_1;
e = load_image(&bl30_mem_info,
BL30_IMAGE_NAME,
BL30_BASE,
&bl30_image_info,
NULL);
if (e == 0) {
#if TRUSTED_BOARD_BOOT
e = auth_verify_obj(AUTH_BL30_IMG,
bl30_image_info.image_base,
bl30_image_info.image_size);
if (e) {
ERROR("Failed to authenticate BL3-0 image.\n");
panic();
}
/* After working with data, invalidate the data cache */
inv_dcache_range(bl30_image_info.image_base,
(size_t)bl30_image_info.image_size);
#endif /* TRUSTED_BOARD_BOOT */
/* The subsequent handling of BL3-0 is platform specific */
bl2_plat_handle_bl30(&bl30_image_info);
}
#endif /* BL30_BASE */
return e;
}
/*******************************************************************************
* Load the BL3-1 image.
* The bl2_to_bl31_params and bl31_ep_info params will be updated with the
* relevant BL3-1 information.
* Return 0 on success, a negative error code otherwise.
******************************************************************************/
static int load_bl31(bl31_params_t *bl2_to_bl31_params,
entry_point_info_t *bl31_ep_info)
{
meminfo_t *bl2_tzram_layout;
int e;
INFO("BL2: Loading BL3-1\n");
assert(bl2_to_bl31_params != NULL);
assert(bl31_ep_info != NULL);
/* Find out how much free trusted ram remains after BL2 load */
bl2_tzram_layout = bl2_plat_sec_mem_layout();
/* Set the X0 parameter to BL3-1 */
bl31_ep_info->args.arg0 = (unsigned long)bl2_to_bl31_params;
/* Load the BL3-1 image */
e = load_image(bl2_tzram_layout,
BL31_IMAGE_NAME,
BL31_BASE,
bl2_to_bl31_params->bl31_image_info,
bl31_ep_info);
if (e == 0) {
#if TRUSTED_BOARD_BOOT
e = auth_verify_obj(AUTH_BL31_IMG,
bl2_to_bl31_params->bl31_image_info->image_base,
bl2_to_bl31_params->bl31_image_info->image_size);
if (e) {
ERROR("Failed to authenticate BL3-1 image.\n");
panic();
}
/* After working with data, invalidate the data cache */
inv_dcache_range(bl2_to_bl31_params->bl31_image_info->image_base,
(size_t)bl2_to_bl31_params->bl31_image_info->image_size);
#endif /* TRUSTED_BOARD_BOOT */
bl2_plat_set_bl31_ep_info(bl2_to_bl31_params->bl31_image_info,
bl31_ep_info);
}
return e;
}
/*******************************************************************************
* Load the BL3-2 image if there's one.
* The bl2_to_bl31_params param will be updated with the relevant BL3-2
* information.
* If a platform does not want to attempt to load BL3-2 image it must leave
* BL32_BASE undefined.
* Return 0 on success or if there's no BL3-2 image to load, a negative error
* code otherwise.
******************************************************************************/
static int load_bl32(bl31_params_t *bl2_to_bl31_params)
{
int e = 0;
#ifdef BL32_BASE
meminfo_t bl32_mem_info;
INFO("BL2: Loading BL3-2\n");
assert(bl2_to_bl31_params != NULL);
/*
* It is up to the platform to specify where BL3-2 should be loaded if
* it exists. It could create space in the secure sram or point to a
* completely different memory.
*/
bl2_plat_get_bl32_meminfo(&bl32_mem_info);
e = load_image(&bl32_mem_info,
BL32_IMAGE_NAME,
BL32_BASE,
bl2_to_bl31_params->bl32_image_info,
bl2_to_bl31_params->bl32_ep_info);
if (e == 0) {
#if TRUSTED_BOARD_BOOT
/* Image is present. Check if there is a valid certificate */
if (bl32_cert_error) {
ERROR("Failed to authenticate BL3-2 certificates.\n");
panic();
}
e = auth_verify_obj(AUTH_BL32_IMG,
bl2_to_bl31_params->bl32_image_info->image_base,
bl2_to_bl31_params->bl32_image_info->image_size);
if (e) {
ERROR("Failed to authenticate BL3-2 image.\n");
panic();
}
/* After working with data, invalidate the data cache */
inv_dcache_range(bl2_to_bl31_params->bl32_image_info->image_base,
(size_t)bl2_to_bl31_params->bl32_image_info->image_size);
#endif /* TRUSTED_BOARD_BOOT */
bl2_plat_set_bl32_ep_info(
bl2_to_bl31_params->bl32_image_info,
bl2_to_bl31_params->bl32_ep_info);
}
#endif /* BL32_BASE */
return e;
}
/*******************************************************************************
* Load the BL3-3 image.
* The bl2_to_bl31_params param will be updated with the relevant BL3-3
* information.
* Return 0 on success, a negative error code otherwise.
******************************************************************************/
static int load_bl33(bl31_params_t *bl2_to_bl31_params)
{
meminfo_t bl33_mem_info;
int e;
INFO("BL2: Loading BL3-3\n");
assert(bl2_to_bl31_params != NULL);
bl2_plat_get_bl33_meminfo(&bl33_mem_info);
/* Load the BL3-3 image in non-secure memory provided by the platform */
e = load_image(&bl33_mem_info,
BL33_IMAGE_NAME,
plat_get_ns_image_entrypoint(),
bl2_to_bl31_params->bl33_image_info,
bl2_to_bl31_params->bl33_ep_info);
if (e == 0) {
#if TRUSTED_BOARD_BOOT
e = auth_verify_obj(AUTH_BL33_IMG,
bl2_to_bl31_params->bl33_image_info->image_base,
bl2_to_bl31_params->bl33_image_info->image_size);
if (e) {
ERROR("Failed to authenticate BL3-3 image.\n");
panic();
}
/* After working with data, invalidate the data cache */
inv_dcache_range(bl2_to_bl31_params->bl33_image_info->image_base,
(size_t)bl2_to_bl31_params->bl33_image_info->image_size);
#endif /* TRUSTED_BOARD_BOOT */
bl2_plat_set_bl33_ep_info(bl2_to_bl31_params->bl33_image_info,
bl2_to_bl31_params->bl33_ep_info);
}
return e;
}
/*******************************************************************************
* The only thing to do in BL2 is to load further images and pass control to
* BL3-1. The memory occupied by BL2 will be reclaimed by BL3-x stages. BL2 runs
* entirely in S-EL1.
******************************************************************************/
void bl2_main(void)
{
bl31_params_t *bl2_to_bl31_params;
entry_point_info_t *bl31_ep_info;
int e;
NOTICE("BL2: %s\n", version_string);
NOTICE("BL2: %s\n", build_message);
/* Perform remaining generic architectural setup in S-EL1 */
bl2_arch_setup();
#if TRUSTED_BOARD_BOOT
/* Initialize authentication module */
auth_init();
/* Validate the certificates involved in the Chain of Trust */
e = load_certs();
if (e) {
ERROR("Chain of Trust invalid. Aborting...\n");
panic();
}
#endif /* TRUSTED_BOARD_BOOT */
/*
* Load the subsequent bootloader images
*/
e = load_bl30();
if (e) {
ERROR("Failed to load BL3-0 (%i)\n", e);
ERROR("Please burn mcu image:\n");
ERROR(" sudo fastboot flash mcuimage mcuimage.bin\n");
}
/* Perform platform setup in BL2 after loading BL3-0 */
bl2_platform_setup();
/*
* Get a pointer to the memory the platform has set aside to pass
* information to BL3-1.
*/
bl2_to_bl31_params = bl2_plat_get_bl31_params();
bl31_ep_info = bl2_plat_get_bl31_ep_info();
e = load_bl31(bl2_to_bl31_params, bl31_ep_info);
if (e) {
ERROR("Failed to load BL3-1 (%i)\n", e);
panic();
}
e = load_bl32(bl2_to_bl31_params);
if (e)
WARN("Failed to load BL3-2 (%i)\n", e);
e = load_bl33(bl2_to_bl31_params);
if (e) {
ERROR("Failed to load BL3-3 (%i)\n", e);
panic();
}
/* Flush the params to be passed to memory */
bl2_plat_flush_bl31_params();
/*
* Run BL3-1 via an SMC to BL1. Information on how to pass control to
* the BL3-2 (if present) and BL3-3 software images will be passed to
* BL3-1 as an argument.
*/
smc(RUN_IMAGE, (unsigned long)bl31_ep_info, 0, 0, 0, 0, 0, 0);
}