Add a generic driver for ARM CCN IP
This patch adds a device driver which can be used to program the following
aspects of ARM CCN IP:
1. Specify the mapping between ACE/ACELite/ACELite+DVM/CHI master interfaces and
Request nodes.
2. Add and remove master interfaces from the snoop and dvm
domains.
3. Place the L3 cache in a given power state.
4. Configuring system adress map and enabling 3 SN striping mode of memory
controller operation.
Change-Id: I0f665c6a306938e5b66f6a92f8549b529aa8f325
diff --git a/drivers/arm/ccn/ccn.c b/drivers/arm/ccn/ccn.c
new file mode 100644
index 0000000..aef891b
--- /dev/null
+++ b/drivers/arm/ccn/ccn.c
@@ -0,0 +1,530 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <assert.h>
+#include <bakery_lock.h>
+#include <ccn.h>
+#include <debug.h>
+#include <errno.h>
+#include <mmio.h>
+#include "ccn_private.h"
+
+static const ccn_desc_t *ccn_plat_desc;
+#if IMAGE_BL31
+DEFINE_BAKERY_LOCK(ccn_lock);
+#endif
+
+/*******************************************************************************
+ * This function takes the base address of the CCN's programmer's view (PV), a
+ * region ID of one of the 256 regions (0-255) and a register offset within the
+ * region. It converts the first two parameters into a base address and uses it
+ * to read the register at the offset.
+ ******************************************************************************/
+static inline unsigned long long ccn_reg_read(uintptr_t periphbase,
+ unsigned int region_id,
+ unsigned int register_offset)
+{
+ uintptr_t region_base;
+
+ assert(periphbase);
+ assert(region_id < REGION_ID_LIMIT);
+
+ region_base = periphbase + region_id_to_base(region_id);
+ return mmio_read_64(region_base + register_offset);
+}
+
+/*******************************************************************************
+ * This function takes the base address of the CCN's programmer's view (PV), a
+ * region ID of one of the 256 regions (0-255), a register offset within the
+ * region and a value. It converts the first two parameters into a base address
+ * and uses it to write the value in the register at the offset.
+ ******************************************************************************/
+static inline void ccn_reg_write(uintptr_t periphbase,
+ unsigned int region_id,
+ unsigned int register_offset,
+ unsigned long long value)
+{
+ uintptr_t region_base;
+
+ assert(periphbase);
+ assert(region_id < REGION_ID_LIMIT);
+
+ region_base = periphbase + region_id_to_base(region_id);
+ mmio_write_64(region_base + register_offset, value);
+}
+
+#if DEBUG
+
+typedef struct rn_info {
+ unsigned char node_desc[MAX_RN_NODES];
+ } rn_info_t;
+
+/*******************************************************************************
+ * This function takes the base address of the CCN's programmer's view (PV) and
+ * the node ID of a Request Node (RN-D or RN-I). It returns the maximum number
+ * of master interfaces resident on that node. This number is equal to the least
+ * significant two bits of the node type ID + 1.
+ ******************************************************************************/
+static unsigned int ccn_get_rni_mcount(uintptr_t periphbase,
+ unsigned int rn_id)
+{
+ unsigned int rn_type_id;
+
+ /* Use the node id to find the type of RN-I/D node */
+ rn_type_id = get_node_type(ccn_reg_read(periphbase,
+ rn_id + RNI_REGION_ID_START,
+ REGION_ID_OFFSET));
+
+ /* Return the number master interfaces based on node type */
+ return rn_type_id_to_master_cnt(rn_type_id);
+}
+
+/*******************************************************************************
+ * This function reads the CCN registers to find the following information about
+ * the ACE/ACELite/ACELite+DVM/CHI interfaces resident on the various types of
+ * Request Nodes (RN-Fs, RN-Is and RN-Ds) in the system:
+ *
+ * 1. The total number of such interfaces that this CCN IP supports. This is the
+ * cumulative number of interfaces across all Request node types. It is
+ * passed back as the return value of this function.
+ *
+ * 2. The maximum number of interfaces of a type resident on a Request node of
+ * one of the three types. This information is populated in the 'info'
+ * array provided by the caller as described next.
+ *
+ * The array has 64 entries. Each entry corresponds to a Request node. The
+ * Miscellaneous node's programmer's view has RN-F, RN-I and RN-D ID
+ * registers. For each RN-I and RN-D ID indicated as being present in these
+ * registers, its identification register (offset 0xFF00) is read. This
+ * register specifies the maximum number of master interfaces the node
+ * supports. For RN-Fs it is assumed that there can be only a single fully
+ * coherent master resident on each node. The counts for each type of node
+ * are use to populate the array entry at the index corresponding to the node
+ * ID i.e. rn_info[node ID] = <number of master interfaces>
+ ******************************************************************************/
+static unsigned int ccn_get_rn_master_info(uintptr_t periphbase,
+ rn_info_t *info)
+{
+ unsigned int num_masters = 0;
+ rn_types_t rn_type;
+
+ assert (info);
+
+ for (rn_type = RN_TYPE_RNF; rn_type < NUM_RN_TYPES; rn_type++) {
+ unsigned int mn_reg_off, node_id;
+ unsigned long long rn_bitmap;
+
+ /*
+ * RN-F, RN-I, RN-D node registers in the MN region occupy
+ * contiguous 16 byte apart offsets.
+ */
+ mn_reg_off = MN_RNF_NODEID_OFFSET + (rn_type << 4);
+ rn_bitmap = ccn_reg_read(periphbase, MN_REGION_ID, mn_reg_off);
+
+ FOR_EACH_PRESENT_NODE_ID(node_id, rn_bitmap) {
+ unsigned int node_mcount;
+
+ /*
+ * A RN-F does not have a node type since it does not
+ * export a programmer's interface. It can only have a
+ * single fully coherent master residing on it. If the
+ * offset of the MN(Miscellaneous Node) register points
+ * to a RN-I/D node then the master count is set to the
+ * maximum number of master interfaces that can possibly
+ * reside on the node.
+ */
+ node_mcount = (mn_reg_off == MN_RNF_NODEID_OFFSET ? 1 :
+ ccn_get_rni_mcount(periphbase, node_id));
+
+ /*
+ * Use this value to increment the maximum possible
+ * master interfaces in the system.
+ */
+ num_masters += node_mcount;
+
+ /*
+ * Update the entry in 'info' for this node ID with
+ * the maximum number of masters than can sit on
+ * it. This information will be used to validate the
+ * node information passed by the platform later.
+ */
+ info->node_desc[node_id] = node_mcount;
+ }
+ }
+
+ return num_masters;
+}
+
+/*******************************************************************************
+ * This function validates parameters passed by the platform (in a debug build).
+ * It collects information about the maximum number of master interfaces that:
+ * a) the CCN IP can accommodate and
+ * b) can exist on each Request node.
+ * It compares this with the information provided by the platform to determine
+ * the validity of the latter.
+ ******************************************************************************/
+static void ccn_validate_plat_params(const ccn_desc_t *plat_desc)
+{
+ unsigned int master_id, num_rn_masters;
+ rn_info_t info = { {0} };
+
+ assert(plat_desc);
+ assert(plat_desc->periphbase);
+ assert(plat_desc->master_to_rn_id_map);
+ assert(plat_desc->num_masters);
+ assert(plat_desc->num_masters < CCN_MAX_RN_MASTERS);
+
+ /*
+ * Find the number and properties of fully coherent, IO coherent and IO
+ * coherent + DVM master interfaces
+ */
+ num_rn_masters = ccn_get_rn_master_info(plat_desc->periphbase, &info);
+ assert(plat_desc->num_masters < num_rn_masters);
+
+ /*
+ * Iterate through the Request nodes specified by the platform.
+ * Decrement the count of the masters in the 'info' array for each
+ * Request node encountered. If the count would drop below 0 then the
+ * platform's view of this aspect of CCN configuration is incorrect.
+ */
+ for (master_id = 0; master_id < plat_desc->num_masters; master_id++) {
+ unsigned int node_id;
+
+ node_id = plat_desc->master_to_rn_id_map[master_id];
+ assert(node_id < MAX_RN_NODES);
+ assert(info.node_desc[node_id]);
+ info.node_desc[node_id]--;
+ }
+}
+#endif /* DEBUG */
+
+/*******************************************************************************
+ * This function validates parameters passed by the platform (in a debug build)
+ * and initialises its internal data structures. A lock is required to prevent
+ * simultaneous CCN operations at runtime (only BL31) to add and remove Request
+ * nodes from coherency.
+ ******************************************************************************/
+void ccn_init(const ccn_desc_t *plat_desc)
+{
+#if DEBUG
+ ccn_validate_plat_params(plat_desc);
+#endif
+
+ ccn_plat_desc = plat_desc;
+}
+
+/*******************************************************************************
+ * This function converts a bit map of master interface IDs to a bit map of the
+ * Request node IDs that they reside on.
+ ******************************************************************************/
+static unsigned long long ccn_master_to_rn_id_map(unsigned long long master_map)
+{
+ unsigned long long rn_id_map = 0;
+ unsigned int node_id, iface_id;
+
+ assert(master_map);
+ assert(ccn_plat_desc);
+
+ FOR_EACH_PRESENT_MASTER_INTERFACE(iface_id, master_map) {
+
+ /* Convert the master ID into the node ID */
+ node_id = ccn_plat_desc->master_to_rn_id_map[iface_id];
+
+ /* Set the bit corresponding to this node ID */
+ rn_id_map |= (1UL << node_id);
+ }
+
+ return rn_id_map;
+}
+
+/*******************************************************************************
+ * This function executes the necessary operations to add or remove Request node
+ * IDs specified in the 'rn_id_map' bitmap from the snoop/DVM domains specified
+ * in the 'hn_id_map'. The 'region_id' specifies the ID of the first HN-F/HN-I
+ * on which the operation should be performed. 'op_reg_offset' specifies the
+ * type of operation (add/remove). 'stat_reg_offset' specifies the register
+ * which should be polled to determine if the operation has completed or not.
+ ******************************************************************************/
+static void ccn_snoop_dvm_do_op(unsigned long long rn_id_map,
+ unsigned long long hn_id_map,
+ unsigned int region_id,
+ unsigned int op_reg_offset,
+ unsigned int stat_reg_offset)
+{
+ unsigned int start_region_id;
+
+ assert(ccn_plat_desc);
+ assert(ccn_plat_desc->periphbase);
+
+#if IMAGE_BL31
+ bakery_lock_get(&ccn_lock);
+#endif
+ start_region_id = region_id;
+ FOR_EACH_PRESENT_REGION_ID(start_region_id, hn_id_map) {
+ ccn_reg_write(ccn_plat_desc->periphbase,
+ start_region_id,
+ op_reg_offset,
+ rn_id_map);
+ }
+
+ start_region_id = region_id;
+
+ FOR_EACH_PRESENT_REGION_ID(start_region_id, hn_id_map) {
+ WAIT_FOR_DOMAIN_CTRL_OP_COMPLETION(start_region_id,
+ stat_reg_offset,
+ op_reg_offset,
+ rn_id_map);
+ }
+
+#if IMAGE_BL31
+ bakery_lock_release(&ccn_lock);
+#endif
+}
+
+/*******************************************************************************
+ * This function reads the bitmap of Home nodes on the basis of the
+ * 'mn_hn_id_reg_offset' parameter from the Miscellaneous node's (MN)
+ * programmer's view. The MN has a register which carries the bitmap of present
+ * Home nodes of each type i.e. HN-Fs, HN-Is & HN-Ds. It calls
+ * 'ccn_snoop_dvm_do_op()' with this information to perform the actual
+ * operation.
+ ******************************************************************************/
+static void ccn_snoop_dvm_domain_common(unsigned long long rn_id_map,
+ unsigned int hn_op_reg_offset,
+ unsigned int hn_stat_reg_offset,
+ unsigned int mn_hn_id_reg_offset,
+ unsigned int hn_region_id)
+{
+ unsigned long long mn_hn_id_map;
+
+ assert(ccn_plat_desc);
+ assert(ccn_plat_desc->periphbase);
+
+ mn_hn_id_map = ccn_reg_read(ccn_plat_desc->periphbase,
+ MN_REGION_ID,
+ mn_hn_id_reg_offset);
+ ccn_snoop_dvm_do_op(rn_id_map,
+ mn_hn_id_map,
+ hn_region_id,
+ hn_op_reg_offset,
+ hn_stat_reg_offset);
+}
+
+/*******************************************************************************
+ * The following functions provide the boot and runtime API to the platform for
+ * adding and removing master interfaces from the snoop/DVM domains. A bitmap of
+ * master interfaces IDs is passed as a parameter. It is converted into a bitmap
+ * of Request node IDs using the mapping provided by the platform while
+ * initialising the driver.
+ * For example, consider a dual cluster system where the clusters have values 0
+ * & 1 in the affinity level 1 field of their respective MPIDRs. While
+ * initialising this driver, the platform provides the mapping between each
+ * cluster and the corresponding Request node. To add or remove a cluster from
+ * the snoop and dvm domain, the bit position corresponding to the cluster ID
+ * should be set in the 'master_iface_map' i.e. to remove both clusters the
+ * bitmap would equal 0x11.
+ ******************************************************************************/
+void ccn_enter_snoop_dvm_domain(unsigned long long master_iface_map)
+{
+ unsigned long long rn_id_map;
+
+ rn_id_map = ccn_master_to_rn_id_map(master_iface_map);
+ ccn_snoop_dvm_domain_common(rn_id_map,
+ HNF_SDC_SET_OFFSET,
+ HNF_SDC_STAT_OFFSET,
+ MN_HNF_NODEID_OFFSET,
+ HNF_REGION_ID_START);
+
+ ccn_snoop_dvm_domain_common(rn_id_map,
+ MN_DDC_SET_OFF,
+ MN_DDC_STAT_OFFSET,
+ MN_HNI_NODEID_OFFSET,
+ MN_REGION_ID);
+}
+
+void ccn_exit_snoop_dvm_domain(unsigned long long master_iface_map)
+{
+ unsigned long long rn_id_map;
+
+ rn_id_map = ccn_master_to_rn_id_map(master_iface_map);
+ ccn_snoop_dvm_domain_common(rn_id_map,
+ HNF_SDC_CLR_OFFSET,
+ HNF_SDC_STAT_OFFSET,
+ MN_HNF_NODEID_OFFSET,
+ HNF_REGION_ID_START);
+
+ ccn_snoop_dvm_domain_common(rn_id_map,
+ MN_DDC_CLR_OFFSET,
+ MN_DDC_STAT_OFFSET,
+ MN_HNI_NODEID_OFFSET,
+ MN_REGION_ID);
+}
+
+void ccn_enter_dvm_domain(unsigned long long master_iface_map)
+{
+ unsigned long long rn_id_map;
+
+ rn_id_map = ccn_master_to_rn_id_map(master_iface_map);
+ ccn_snoop_dvm_domain_common(rn_id_map,
+ MN_DDC_SET_OFF,
+ MN_DDC_STAT_OFFSET,
+ MN_HNI_NODEID_OFFSET,
+ MN_REGION_ID);
+}
+
+void ccn_exit_dvm_domain(unsigned long long master_iface_map)
+{
+ unsigned long long rn_id_map;
+
+ rn_id_map = ccn_master_to_rn_id_map(master_iface_map);
+ ccn_snoop_dvm_domain_common(rn_id_map,
+ MN_DDC_CLR_OFFSET,
+ MN_DDC_STAT_OFFSET,
+ MN_HNI_NODEID_OFFSET,
+ MN_REGION_ID);
+}
+
+/*******************************************************************************
+ * This function returns the run mode of all the L3 cache partitions in the
+ * system. The state is expected to be one of NO_L3, SF_ONLY, L3_HAM or
+ * L3_FAM. Instead of comparing the states reported by all HN-Fs, the state of
+ * the first present HN-F node is reported. Since the driver does not export an
+ * interface to program them seperately, there is no reason to perform this
+ * check. An HN-F could report that the L3 cache is transitioning from one mode
+ * to another e.g. HNF_PM_NOL3_2_SFONLY. In this case, the function waits for
+ * the transition to complete and reports the final state.
+ ******************************************************************************/
+unsigned int ccn_get_l3_run_mode(void)
+{
+ unsigned long long hnf_pstate_stat;
+
+ assert(ccn_plat_desc);
+ assert(ccn_plat_desc->periphbase);
+
+ /*
+ * Wait for a L3 cache paritition to enter any run mode. The pstate
+ * parameter is read from an HN-F P-state status register. A non-zero
+ * value in bits[1:0] means that the cache is transitioning to a run
+ * mode.
+ */
+ do {
+ hnf_pstate_stat = ccn_reg_read(ccn_plat_desc->periphbase,
+ HNF_REGION_ID_START,
+ HNF_PSTATE_STAT_OFFSET);
+ } while (hnf_pstate_stat & 0x3);
+
+ return PSTATE_TO_RUN_MODE(hnf_pstate_stat);
+}
+
+/*******************************************************************************
+ * This function sets the run mode of all the L3 cache partitions in the
+ * system to one of NO_L3, SF_ONLY, L3_HAM or L3_FAM depending upon the state
+ * specified by the 'mode' argument.
+ ******************************************************************************/
+void ccn_set_l3_run_mode(unsigned int mode)
+{
+ unsigned long long mn_hnf_id_map, hnf_pstate_stat;
+ unsigned int region_id;
+
+ assert(ccn_plat_desc);
+ assert(ccn_plat_desc->periphbase);
+ assert(mode <= CCN_L3_RUN_MODE_FAM);
+
+ mn_hnf_id_map = ccn_reg_read(ccn_plat_desc->periphbase,
+ MN_REGION_ID,
+ MN_HNF_NODEID_OFFSET);
+ region_id = HNF_REGION_ID_START;
+
+ /* Program the desired run mode */
+ FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) {
+ ccn_reg_write(ccn_plat_desc->periphbase,
+ region_id,
+ HNF_PSTATE_REQ_OFFSET,
+ mode);
+ }
+
+ /* Wait for the caches to transition to the run mode */
+ region_id = HNF_REGION_ID_START;
+ FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) {
+ /*
+ * Wait for a L3 cache paritition to enter a target run
+ * mode. The pstate parameter is read from an HN-F P-state
+ * status register.
+ */
+ do {
+ hnf_pstate_stat = ccn_reg_read(ccn_plat_desc->periphbase,
+ region_id,
+ HNF_PSTATE_STAT_OFFSET);
+ } while (((hnf_pstate_stat & HNF_PSTATE_MASK) >> 2) != mode);
+ }
+}
+
+/*******************************************************************************
+ * This function configures system address map and provides option to enable the
+ * 3SN striping mode of Slave node operation. The Slave node IDs and the Top
+ * Address bit1 and bit0 are provided as parameters to this function. This
+ * configuration is needed only if network contains a single SN-F or 3 SN-F and
+ * must be completed before the first request by the system to normal memory.
+ ******************************************************************************/
+void ccn_program_sys_addrmap(unsigned int sn0_id,
+ unsigned int sn1_id,
+ unsigned int sn2_id,
+ unsigned int top_addr_bit0,
+ unsigned int top_addr_bit1,
+ unsigned char three_sn_en)
+{
+ unsigned long long mn_hnf_id_map, hnf_sam_ctrl_value;
+ unsigned int region_id;
+
+ assert(ccn_plat_desc);
+ assert(ccn_plat_desc->periphbase);
+
+ mn_hnf_id_map = ccn_reg_read(ccn_plat_desc->periphbase,
+ MN_REGION_ID,
+ MN_HNF_NODEID_OFFSET);
+ region_id = HNF_REGION_ID_START;
+ hnf_sam_ctrl_value = MAKE_HNF_SAM_CTRL_VALUE(sn0_id,
+ sn1_id,
+ sn2_id,
+ top_addr_bit0,
+ top_addr_bit1,
+ three_sn_en);
+
+ FOR_EACH_PRESENT_REGION_ID(region_id, mn_hnf_id_map) {
+
+ /* Program the SAM control register */
+ ccn_reg_write(ccn_plat_desc->periphbase,
+ region_id,
+ HNF_SAM_CTRL_OFFSET,
+ hnf_sam_ctrl_value);
+ }
+
+}
diff --git a/drivers/arm/ccn/ccn_private.h b/drivers/arm/ccn/ccn_private.h
new file mode 100644
index 0000000..e92e870
--- /dev/null
+++ b/drivers/arm/ccn/ccn_private.h
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __CCN_PRIVATE_H__
+#define __CCN_PRIVATE_H__
+
+/*
+ * A CCN implementation can have a maximum of 64 Request nodes with node IDs
+ * from 0-63. These IDs are split across the three types of Request nodes
+ * i.e. RN-F, RN-D and RN-I.
+ */
+#define MAX_RN_NODES 64
+
+/* Enum used to loop through the 3 types of Request nodes */
+typedef enum rn_types {
+ RN_TYPE_RNF = 0,
+ RN_TYPE_RNI,
+ RN_TYPE_RND,
+ NUM_RN_TYPES
+} rn_types_t;
+
+/* Macro to convert a region id to its base address */
+#define region_id_to_base(id) ((id) << 16)
+
+/*
+ * Macro to calculate the number of master interfaces resident on a RN-I/RN-D.
+ * Value of first two bits of the RN-I/D node type + 1 == Maximum number of
+ * ACE-Lite or ACE-Lite+DVM interfaces supported on this node. E.g.
+ *
+ * 0x14 : RN-I with 1 ACE-Lite interface
+ * 0x15 : RN-I with 2 ACE-Lite interfaces
+ * 0x16 : RN-I with 3 ACE-Lite interfaces
+ */
+#define rn_type_id_to_master_cnt(id) (((id) & 0x3) + 1)
+
+/*
+ * Constants used to identify a region in the programmer's view. These are
+ * common for all regions.
+ */
+#define REGION_ID_LIMIT 256
+#define REGION_ID_OFFSET 0xFF00
+
+#define REGION_NODE_ID_SHIFT 8
+#define REGION_NODE_ID_MASK 0x7f
+#define get_node_id(id_reg) (((id_reg) >> REGION_NODE_ID_SHIFT) \
+ & REGION_NODE_ID_MASK)
+
+#define REGION_NODE_TYPE_SHIFT 0
+#define REGION_NODE_TYPE_MASK 0x1f
+#define get_node_type(id_reg) (((id_reg) >> REGION_NODE_TYPE_SHIFT) \
+ & REGION_NODE_TYPE_MASK)
+
+/* Common offsets of registers to enter or exit a snoop/dvm domain */
+#define DOMAIN_CTRL_STAT_OFFSET 0x0200
+#define DOMAIN_CTRL_SET_OFFSET 0x0210
+#define DOMAIN_CTRL_CLR_OFFSET 0x0220
+
+/*
+ * Thess macros are used to determine if an operation to add or remove a Request
+ * node from the snoop/dvm domain has completed. 'rn_id_map' is a bit map of
+ * nodes. It was used to program the SET or CLEAR control register. The type of
+ * register is specified by 'op_reg_offset'. 'status_reg' is the bit map of
+ * nodes currently present in the snoop/dvm domain. 'rn_id_map' and 'status_reg'
+ * are logically ANDed and the result it stored back in the 'status_reg'. There
+ * are two outcomes of this operation:
+ *
+ * 1. If the DOMAIN_CTRL_SET_OFFSET register was programmed, then the set bits in
+ * 'rn_id_map' should appear in 'status_reg' when the operation completes. So
+ * after the AND operation, at some point of time 'status_reg' should equal
+ * 'rn_id_map'.
+ *
+ * 2. If the DOMAIN_CTRL_CLR_OFFSET register was programmed, then the set bits in
+ * 'rn_id_map' should disappear in 'status_reg' when the operation
+ * completes. So after the AND operation, at some point of time 'status_reg'
+ * should equal 0.
+ */
+#define WAIT_FOR_DOMAIN_CTRL_OP_COMPLETION(region_id, stat_reg_offset, \
+ op_reg_offset, rn_id_map) \
+ { \
+ uint64_t status_reg; \
+ do { \
+ status_reg = ccn_reg_read((ccn_plat_desc->periphbase), \
+ (region_id), \
+ (stat_reg_offset)); \
+ status_reg &= (rn_id_map); \
+ } while ((op_reg_offset) == DOMAIN_CTRL_SET_OFFSET ? \
+ (rn_id_map) != status_reg : status_reg); \
+ }
+
+/*
+ * Region ID of the Miscellaneous Node is always 0 as its located at the base of
+ * the programmer's view.
+ */
+#define MN_REGION_ID 0
+
+#define MN_REGION_ID_START 0
+#define DEBUG_REGION_ID_START 1
+#define HNI_REGION_ID_START 8
+#define SBSX_REGION_ID_START 16
+#define HNF_REGION_ID_START 32
+#define XP_REGION_ID_START 64
+#define RNI_REGION_ID_START 128
+
+/* Selected register offsets from the base of a HNF region */
+#define HNF_CFG_CTRL_OFFSET 0x0000
+#define HNF_SAM_CTRL_OFFSET 0x0008
+#define HNF_PSTATE_REQ_OFFSET 0x0010
+#define HNF_PSTATE_STAT_OFFSET 0x0018
+#define HNF_SDC_STAT_OFFSET DOMAIN_CTRL_STAT_OFFSET
+#define HNF_SDC_SET_OFFSET DOMAIN_CTRL_SET_OFFSET
+#define HNF_SDC_CLR_OFFSET DOMAIN_CTRL_CLR_OFFSET
+#define HNF_AUX_CTRL_OFFSET 0x0500
+
+/* Selected register offsets from the base of a MN region */
+#define MN_SAR_OFFSET 0x0000
+#define MN_RNF_NODEID_OFFSET 0x0180
+#define MN_RNI_NODEID_OFFSET 0x0190
+#define MN_RND_NODEID_OFFSET 0x01A0
+#define MN_HNF_NODEID_OFFSET 0x01B0
+#define MN_HNI_NODEID_OFFSET 0x01C0
+#define MN_SN_NODEID_OFFSET 0x01D0
+#define MN_DDC_STAT_OFFSET DOMAIN_CTRL_STAT_OFFSET
+#define MN_DDC_SET_OFF DOMAIN_CTRL_SET_OFFSET
+#define MN_DDC_CLR_OFFSET DOMAIN_CTRL_CLR_OFFSET
+#define MN_ID_OFFSET REGION_ID_OFFSET
+
+/* HNF System Address Map register bit masks and shifts */
+#define HNF_SAM_CTRL_SN_ID_MASK 0x7f
+#define HNF_SAM_CTRL_SN0_ID_SHIFT 0
+#define HNF_SAM_CTRL_SN1_ID_SHIFT 8
+#define HNF_SAM_CTRL_SN2_ID_SHIFT 16
+
+#define HNF_SAM_CTRL_TAB0_MASK 0x3fUL
+#define HNF_SAM_CTRL_TAB0_SHIFT 48
+#define HNF_SAM_CTRL_TAB1_MASK 0x3fUL
+#define HNF_SAM_CTRL_TAB1_SHIFT 56
+
+#define HNF_SAM_CTRL_3SN_ENB_SHIFT 32
+#define HNF_SAM_CTRL_3SN_ENB_MASK 0x01UL
+
+/*
+ * Macro to create a value suitable for programming into a HNF SAM Control
+ * register for enabling 3SN striping.
+ */
+#define MAKE_HNF_SAM_CTRL_VALUE(sn0, sn1, sn2, tab0, tab1, three_sn_en) \
+ ((((sn0) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN0_ID_SHIFT) | \
+ (((sn1) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN1_ID_SHIFT) | \
+ (((sn2) & HNF_SAM_CTRL_SN_ID_MASK) << HNF_SAM_CTRL_SN2_ID_SHIFT) | \
+ (((tab0) & HNF_SAM_CTRL_TAB0_MASK) << HNF_SAM_CTRL_TAB0_SHIFT) | \
+ (((tab1) & HNF_SAM_CTRL_TAB1_MASK) << HNF_SAM_CTRL_TAB1_SHIFT) | \
+ (((three_sn_en) & HNF_SAM_CTRL_3SN_ENB_MASK) << HNF_SAM_CTRL_3SN_ENB_SHIFT))
+
+/* Mask to read the power state value from an HN-F P-state register */
+#define HNF_PSTATE_MASK 0xf
+
+/* Macro to extract the run mode from a p-state value */
+#define PSTATE_TO_RUN_MODE(pstate) (((pstate) & HNF_PSTATE_MASK) >> 2)
+
+/*
+ * Helper macro that iterates through a given bit map. In each iteration,
+ * it returns the position of the set bit.
+ * It can be used by other utility macros to iterates through all nodes
+ * or masters given a bit map of them.
+ */
+#define FOR_EACH_BIT(bit_pos, bit_map) \
+ for (bit_pos = __builtin_ctzll(bit_map); \
+ bit_map; \
+ bit_map &= ~(1UL << bit_pos), \
+ bit_pos = __builtin_ctzll(bit_map))
+
+/*
+ * Utility macro that iterates through a bit map of node IDs. In each
+ * iteration, it returns the ID of the next present node in the bit map. Node
+ * ID of a present node == Position of set bit == Number of zeroes trailing the
+ * bit.
+ */
+#define FOR_EACH_PRESENT_NODE_ID(node_id, bit_map) \
+ FOR_EACH_BIT(node_id, bit_map)
+
+/*
+ * Helper function to return number of set bits in bitmap
+ */
+static inline unsigned int count_set_bits(uint64_t bitmap)
+{
+ unsigned int count = 0;
+
+ for (; bitmap; bitmap &= bitmap - 1)
+ ++count;
+
+ return count;
+}
+
+/*
+ * Utility macro that iterates through a bit map of node IDs. In each iteration,
+ * it returns the ID of the next present region corresponding to a node present
+ * in the bit map. Region ID of a present node is in between passed region id
+ * and region id + number of set bits in the bitmap i.e. the number of present
+ * nodes.
+ */
+#define FOR_EACH_PRESENT_REGION_ID(region_id, bit_map) \
+ for (unsigned long long region_id_limit = count_set_bits(bit_map) \
+ + region_id; \
+ region_id < region_id_limit; \
+ region_id++)
+
+/*
+ * Same macro as FOR_EACH_PRESENT_NODE, but renamed to indicate it traverses
+ * through a bit map of master interfaces.
+ */
+#define FOR_EACH_PRESENT_MASTER_INTERFACE(iface_id, bit_map) \
+ FOR_EACH_BIT(iface_id, bit_map)
+#endif /* __CCN_PRIVATE_H__ */
diff --git a/include/drivers/arm/ccn.h b/include/drivers/arm/ccn.h
new file mode 100644
index 0000000..2361596
--- /dev/null
+++ b/include/drivers/arm/ccn.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __CCN_H__
+#define __CCN_H__
+
+/*
+ * This macro defines the maximum number of master interfaces that reside on
+ * Request nodes which the CCN driver can accommodate. The driver APIs to add
+ * and remove Request nodes from snoop/dvm domains take a bit map of master
+ * interfaces as inputs. The largest C data type that can be used is a 64-bit
+ * unsigned integer. Hence the value of 64. The platform will have to ensure
+ * that the master interfaces are numbered from 0-63.
+ */
+#define CCN_MAX_RN_MASTERS 64
+
+/*
+ * The following constants define the various run modes that the platform can
+ * request the CCN driver to place the L3 cache in. These map to the
+ * programmable P-State values in a HN-F P-state register.
+ */
+#define CCN_L3_RUN_MODE_NOL3 0x0 /* HNF_PM_NOL3 */
+#define CCN_L3_RUN_MODE_SFONLY 0x1 /* HNF_PM_SFONLY */
+#define CCN_L3_RUN_MODE_HAM 0x2 /* HNF_PM_HALF */
+#define CCN_L3_RUN_MODE_FAM 0x3 /* HNF_PM_FULL */
+
+/*
+ * The following macro takes the value returned from a read of a HN-F P-state
+ * status register and returns the retention state value.
+ */
+#define CCN_GET_RETENTION_STATE(pstate) ((pstate >> 4) & 0x3)
+
+/*
+ * The following macro takes the value returned from a read of a HN-F P-state
+ * status register and returns the run state value.
+ */
+#define CCN_GET_RUN_STATE(pstate) (pstate & 0xf)
+
+#ifndef __ASSEMBLY__
+#include <stdint.h>
+
+/*
+ * This structure describes some of the implementation defined attributes of the
+ * CCN IP. It is used by the platform port to specify these attributes in order
+ * to initialise the CCN driver. The attributes are described below.
+ *
+ * 1. The 'num_masters' field specifies the total number of master interfaces
+ * resident on Request nodes.
+ *
+ * 2. The 'master_to_rn_id_map' field is a ponter to an array in which each
+ * index corresponds to a master interface and its value corresponds to the
+ * Request node on which the master interface resides.
+ * This field is not simply defined as an array of size CCN_MAX_RN_MASTERS.
+ * In reality, a platform will have much fewer master * interfaces than
+ * CCN_MAX_RN_MASTERS. With an array of this size, it would also have to
+ * set the unused entries to a suitable value. Zeroing the array would not
+ * be enough since 0 is also a valid node id. Hence, such an array is not
+ * used.
+ *
+ * 3. The 'periphbase' field is the base address of the programmer's view of the
+ * CCN IP.
+ */
+typedef struct ccn_desc {
+ unsigned int num_masters;
+ const unsigned char *master_to_rn_id_map;
+ uintptr_t periphbase;
+} ccn_desc_t;
+
+
+void ccn_init(const ccn_desc_t *plat_ccn_desc);
+void ccn_enter_snoop_dvm_domain(unsigned long long master_iface_map);
+void ccn_exit_snoop_dvm_domain(unsigned long long master_iface_map);
+void ccn_enter_dvm_domain(unsigned long long master_iface_map);
+void ccn_exit_dvm_domain(unsigned long long master_iface_map);
+void ccn_set_l3_run_mode(unsigned int mode);
+void ccn_program_sys_addrmap(unsigned int sn0_id,
+ unsigned int sn1_id,
+ unsigned int sn2_id,
+ unsigned int top_addr_bit0,
+ unsigned int top_addr_bit1,
+ unsigned char three_sn_en);
+unsigned int ccn_get_l3_run_mode(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CCN_H__ */
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index 1234619..eb5ae11 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -74,6 +74,7 @@
plat/common/aarch64/plat_common.c
BL1_SOURCES += drivers/arm/cci/cci.c \
+ drivers/arm/ccn/ccn.c \
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
drivers/io/io_storage.c \
@@ -91,6 +92,7 @@
plat/common/aarch64/platform_up_stack.S
BL31_SOURCES += drivers/arm/cci/cci.c \
+ drivers/arm/ccn/ccn.c \
drivers/arm/gic/arm_gic.c \
drivers/arm/gic/gic_v2.c \
drivers/arm/gic/gic_v3.c \
