GICv2: Add driver API to set PE target mask
The PE target mask is used to translate linear PE index (returned by
platform core position) to a bit mask used when targeting interrupts to
a PE, viz. when raising SGIs and routing SPIs.
The platform shall:
- Populate the driver data with a pointer to array that's to contain
per-PE target masks.
- Invoke the new driver API 'gicv2_set_pe_target_mask()' during
per-CPU initialization so that the driver populates the target mask
for that CPU.
Platforms that don't intend to target interrupts or raise SGIs need not
populate this.
Change-Id: Ic0db54da86915e9dccd82fff51479bc3c1fdc968
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
diff --git a/drivers/arm/gic/v2/gicv2_main.c b/drivers/arm/gic/v2/gicv2_main.c
index 7759a55..2826680 100644
--- a/drivers/arm/gic/v2/gicv2_main.c
+++ b/drivers/arm/gic/v2/gicv2_main.c
@@ -252,3 +252,26 @@
return gicc_read_rpr(driver_data->gicc_base);
}
+
+/*******************************************************************************
+ * This function sets the GICv2 target mask pattern for the current PE. The PE
+ * target mask is used to translate linear PE index (returned by platform core
+ * position) to a bit mask used when targeting interrupts to a PE, viz. when
+ * raising SGIs and routing SPIs.
+ ******************************************************************************/
+void gicv2_set_pe_target_mask(unsigned int proc_num)
+{
+ assert(driver_data);
+ assert(driver_data->gicd_base);
+ assert(driver_data->target_masks);
+ assert(proc_num < GICV2_MAX_TARGET_PE);
+ assert(proc_num < driver_data->target_masks_num);
+
+ /* Return if the target mask is already populated */
+ if (driver_data->target_masks[proc_num])
+ return;
+
+ /* Read target register corresponding to this CPU */
+ driver_data->target_masks[proc_num] =
+ gicv2_get_cpuif_id(driver_data->gicd_base);
+}
diff --git a/include/drivers/arm/gicv2.h b/include/drivers/arm/gicv2.h
index 1ef0779..c91cc1b 100644
--- a/include/drivers/arm/gicv2.h
+++ b/include/drivers/arm/gicv2.h
@@ -13,6 +13,9 @@
/* Interrupt IDs reported by the HPPIR and IAR registers */
#define PENDING_G1_INTID 1022
+/* GICv2 can only target up to 8 PEs */
+#define GICV2_MAX_TARGET_PE 8
+
/*******************************************************************************
* GICv2 specific Distributor interface register offsets and constants.
******************************************************************************/
@@ -103,23 +106,29 @@
* in order to initialize the GICv2 driver. The attributes are described
* below.
*
- * 1. The 'gicd_base' field contains the base address of the Distributor
- * interface programmer's view.
+ * The 'gicd_base' field contains the base address of the Distributor interface
+ * programmer's view.
*
- * 2. The 'gicc_base' field contains the base address of the CPU Interface
- * programmer's view.
+ * The 'gicc_base' field contains the base address of the CPU Interface
+ * programmer's view.
*
- * 3. The 'g0_interrupt_array' field is a pointer to an array in which each
- * entry corresponds to an ID of a Group 0 interrupt.
+ * The 'g0_interrupt_array' field is a pointer to an array in which each
+ * entry corresponds to an ID of a Group 0 interrupt.
*
- * 4. The 'g0_interrupt_num' field contains the number of entries in the
- * 'g0_interrupt_array'.
+ * The 'g0_interrupt_num' field contains the number of entries in the
+ * 'g0_interrupt_array'.
+ *
+ * The 'target_masks' is a pointer to an array containing 'target_masks_num'
+ * elements. The GIC driver will populate the array with per-PE target mask to
+ * use to when targeting interrupts.
******************************************************************************/
typedef struct gicv2_driver_data {
uintptr_t gicd_base;
uintptr_t gicc_base;
unsigned int g0_interrupt_num;
const unsigned int *g0_interrupt_array;
+ unsigned int *target_masks;
+ unsigned int target_masks_num;
} gicv2_driver_data_t;
/*******************************************************************************
@@ -137,6 +146,7 @@
void gicv2_end_of_interrupt(unsigned int id);
unsigned int gicv2_get_interrupt_group(unsigned int id);
unsigned int gicv2_get_running_priority(void);
+void gicv2_set_pe_target_mask(unsigned int proc_num);
#endif /* __ASSEMBLY__ */
#endif /* __GICV2_H__ */
