blob: 471141dd76c2006d92737fcfac410f07871d4e23 [file] [log] [blame]
/*
* Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
#include <debug.h>
#include <platform.h>
#include <string.h>
#include "psci_private.h"
/******************************************************************************
* Construct the psci_power_state to request power OFF at all power levels.
******************************************************************************/
static void psci_set_power_off_state(psci_power_state_t *state_info)
{
int lvl;
for (lvl = PSCI_CPU_PWR_LVL; lvl <= PLAT_MAX_PWR_LVL; lvl++)
state_info->pwr_domain_state[lvl] = PLAT_MAX_OFF_STATE;
}
/******************************************************************************
* Top level handler which is called when a cpu wants to power itself down.
* It's assumed that along with turning the cpu power domain off, power
* domains at higher levels will be turned off as far as possible. It finds
* the highest level where a domain has to be powered off by traversing the
* node information and then performs generic, architectural, platform setup
* and state management required to turn OFF that power domain and domains
* below it. e.g. For a cpu that's to be powered OFF, it could mean programming
* the power controller whereas for a cluster that's to be powered off, it will
* call the platform specific code which will disable coherency at the
* interconnect level if the cpu is the last in the cluster and also the
* program the power controller.
******************************************************************************/
int psci_do_cpu_off(unsigned int end_pwrlvl)
{
int rc = PSCI_E_SUCCESS, idx = plat_my_core_pos();
psci_power_state_t state_info;
/*
* This function must only be called on platforms where the
* CPU_OFF platform hooks have been implemented.
*/
assert(psci_plat_pm_ops->pwr_domain_off);
/*
* This function acquires the lock corresponding to each power
* level so that by the time all locks are taken, the system topology
* is snapshot and state management can be done safely.
*/
psci_acquire_pwr_domain_locks(end_pwrlvl,
idx);
/*
* Call the cpu off handler registered by the Secure Payload Dispatcher
* to let it do any bookkeeping. Assume that the SPD always reports an
* E_DENIED error if SP refuse to power down
*/
if (psci_spd_pm && psci_spd_pm->svc_off) {
rc = psci_spd_pm->svc_off(0);
if (rc)
goto exit;
}
/* Construct the psci_power_state for CPU_OFF */
psci_set_power_off_state(&state_info);
/*
* This function is passed the requested state info and
* it returns the negotiated state info for each power level upto
* the end level specified.
*/
psci_do_state_coordination(end_pwrlvl, &state_info);
#if ENABLE_PSCI_STAT
/* Update the last cpu for each level till end_pwrlvl */
psci_stats_update_pwr_down(end_pwrlvl, &state_info);
#endif
/*
* Arch. management. Perform the necessary steps to flush all
* cpu caches.
*/
psci_do_pwrdown_cache_maintenance(psci_find_max_off_lvl(&state_info));
/*
* Plat. management: Perform platform specific actions to turn this
* cpu off e.g. exit cpu coherency, program the power controller etc.
*/
psci_plat_pm_ops->pwr_domain_off(&state_info);
#if ENABLE_PSCI_STAT
/*
* Capture time-stamp while entering low power state.
* No cache maintenance needed because caches are off
* and writes are direct to main memory.
*/
PMF_CAPTURE_TIMESTAMP(psci_svc, PSCI_STAT_ID_ENTER_LOW_PWR,
PMF_NO_CACHE_MAINT);
#endif
exit:
/*
* Release the locks corresponding to each power level in the
* reverse order to which they were acquired.
*/
psci_release_pwr_domain_locks(end_pwrlvl,
idx);
/*
* Check if all actions needed to safely power down this cpu have
* successfully completed.
*/
if (rc == PSCI_E_SUCCESS) {
/*
* Set the affinity info state to OFF. This writes directly to
* main memory as caches are disabled, so cache maintenance is
* required to ensure that later cached reads of aff_info_state
* return AFF_STATE_OFF. A dsbish() ensures ordering of the
* update to the affinity info state prior to cache line
* invalidation.
*/
flush_cpu_data(psci_svc_cpu_data.aff_info_state);
psci_set_aff_info_state(AFF_STATE_OFF);
dsbish();
inv_cpu_data(psci_svc_cpu_data.aff_info_state);
if (psci_plat_pm_ops->pwr_domain_pwr_down_wfi) {
/* This function must not return */
psci_plat_pm_ops->pwr_domain_pwr_down_wfi(&state_info);
} else {
/*
* Enter a wfi loop which will allow the power
* controller to physically power down this cpu.
*/
psci_power_down_wfi();
}
}
return rc;
}