rockchip: handle some interrupt before enter power mode for rk3399
For the PMU design, we don't expect to get the interrupts before enter
the power mode. Since that will cause the confusion for the state
machine in the power mode.
Change-Id: Id8dee79ae617a66271b5caf92caf35f520f45099
diff --git a/plat/rockchip/common/include/plat_private.h b/plat/rockchip/common/include/plat_private.h
index 7199899..b9b634e 100644
--- a/plat/rockchip/common/include/plat_private.h
+++ b/plat/rockchip/common/include/plat_private.h
@@ -56,6 +56,7 @@
int (*sys_pwr_dm_resume)(void);
void (*sys_gbl_soft_reset)(void) __dead2;
void (*system_off)(void) __dead2;
+ void (*sys_pwr_down_wfi)(const psci_power_state_t *state_info) __dead2;
};
/******************************************************************************
diff --git a/plat/rockchip/common/plat_pm.c b/plat/rockchip/common/plat_pm.c
index b6291bb..7372fcf 100644
--- a/plat/rockchip/common/plat_pm.c
+++ b/plat/rockchip/common/plat_pm.c
@@ -311,6 +311,18 @@
rockchip_ops->system_off();
}
+static void
+__dead2 rockchip_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state)
+{
+ if ((RK_CORE_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE) &&
+ (rockchip_ops)) {
+ if (RK_SYSTEM_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE &&
+ rockchip_ops->sys_pwr_down_wfi)
+ rockchip_ops->sys_pwr_down_wfi(target_state);
+ }
+ psci_power_down_wfi();
+}
+
/*******************************************************************************
* Export the platform handlers via plat_rockchip_psci_pm_ops. The rockchip
* standard
@@ -323,6 +335,7 @@
.pwr_domain_suspend = rockchip_pwr_domain_suspend,
.pwr_domain_on_finish = rockchip_pwr_domain_on_finish,
.pwr_domain_suspend_finish = rockchip_pwr_domain_suspend_finish,
+ .pwr_domain_pwr_down_wfi = rockchip_pwr_domain_pwr_down_wfi,
.system_reset = rockchip_system_reset,
.system_off = rockchip_system_poweroff,
.validate_power_state = rockchip_validate_power_state,
diff --git a/plat/rockchip/rk3399/drivers/pmu/pmu.c b/plat/rockchip/rk3399/drivers/pmu/pmu.c
index 827f483..d2d1acd 100644
--- a/plat/rockchip/rk3399/drivers/pmu/pmu.c
+++ b/plat/rockchip/rk3399/drivers/pmu/pmu.c
@@ -47,6 +47,7 @@
#include <pmu_com.h>
#include <pwm.h>
#include <soc.h>
+#include <bl31.h>
DEFINE_BAKERY_LOCK(rockchip_pd_lock);
@@ -756,8 +757,9 @@
*
* Also note that these counters can run off the 32 kHz clock or the 24 MHz
* clock. While the 24 MHz clock can give us more precision, it's not always
- * available (like when we turn the oscillator off at sleep time). Current
- * understanding is that counts work like this:
+ * available (like when we turn the oscillator off at sleep time). The
+ * pmu_use_lf (lf: low freq) is available in power mode. Current understanding
+ * is that counts work like this:
* IF (pmu_use_lf == 0) || (power_mode_en == 0)
* use the 24M OSC for counts
* ELSE
@@ -920,6 +922,10 @@
}
mmio_setbits_32(PMU_BASE + PMU_PWRDN_CON, BIT(PMU_SCU_B_PWRDWN_EN));
+ /*
+ * Disabling PLLs/PWM/DVFS is approaching WFI which is
+ * the last steps in suspend.
+ */
plls_suspend_prepare();
disable_dvfs_plls();
disable_pwms();
@@ -940,6 +946,17 @@
enable_dvfs_plls();
plls_resume_finish();
+ /*
+ * The wakeup status is not cleared by itself, we need to clear it
+ * manually. Otherwise we will alway query some interrupt next time.
+ *
+ * NOTE: If the kernel needs to query this, we might want to stash it
+ * somewhere.
+ */
+ mmio_write_32(PMU_BASE + PMU_WAKEUP_STATUS, 0xffffffff);
+
+ mmio_write_32(PMU_BASE + PMU_WKUP_CFG4, 0x00);
+
mmio_write_32(SGRF_BASE + SGRF_SOC_CON0_1(1),
(cpu_warm_boot_addr >> CPU_BOOT_ADDR_ALIGN) |
CPU_BOOT_ADDR_WMASK);
@@ -1032,6 +1049,42 @@
while (1)
;
}
+static void __dead2 sys_pwr_down_wfi(const psci_power_state_t *target_state)
+{
+ uint32_t wakeup_status;
+
+ /*
+ * Check wakeup status and abort suspend early if we see a wakeup
+ * event.
+ *
+ * NOTE: technically I we're supposed to just execute a wfi here and
+ * we'll either execute a normal suspend/resume or the wfi will be
+ * treated as a no-op if a wake event was present and caused an abort
+ * of the suspend/resume. For some reason that's not happening and if
+ * we execute the wfi while a wake event is pending then the whole
+ * system wedges.
+ *
+ * Until the above is solved this extra check prevents system wedges in
+ * most cases but there is still a small race condition between checking
+ * PMU_WAKEUP_STATUS and executing wfi. If a wake event happens in
+ * there then we will die.
+ */
+ wakeup_status = mmio_read_32(PMU_BASE + PMU_WAKEUP_STATUS);
+ if (wakeup_status) {
+ WARN("early wake, will not enter power mode.\n");
+
+ mmio_write_32(PMU_BASE + PMU_PWRMODE_CON, 0);
+
+ disable_mmu_icache_el3();
+ bl31_warm_entrypoint();
+
+ while (1)
+ ;
+ } else {
+ /* Enter WFI */
+ psci_power_down_wfi();
+ }
+}
static struct rockchip_pm_ops_cb pm_ops = {
.cores_pwr_dm_on = cores_pwr_domain_on,
@@ -1047,6 +1100,7 @@
.sys_pwr_dm_resume = sys_pwr_domain_resume,
.sys_gbl_soft_reset = soc_soft_reset,
.system_off = soc_system_off,
+ .sys_pwr_down_wfi = sys_pwr_down_wfi,
};
void plat_rockchip_pmu_init(void)
