blob: d72893c643327c47fcf5ff696ea66bedb84dcca5 [file] [log] [blame]
/*
* Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __PLATFORM_DEF_H__
#define __PLATFORM_DEF_H__
#include <arch.h>
#include <common_def.h>
#include <rk3368_def.h>
#define DEBUG_XLAT_TABLE 0
/*******************************************************************************
* Platform binary types for linking
******************************************************************************/
#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
#define PLATFORM_LINKER_ARCH aarch64
/*******************************************************************************
* Generic platform constants
******************************************************************************/
/* Size of cacheable stacks */
#if DEBUG_XLAT_TABLE
#define PLATFORM_STACK_SIZE 0x800
#elif defined(IMAGE_BL1)
#define PLATFORM_STACK_SIZE 0x440
#elif defined(IMAGE_BL2)
#define PLATFORM_STACK_SIZE 0x400
#elif defined(IMAGE_BL31)
#define PLATFORM_STACK_SIZE 0x800
#elif defined(IMAGE_BL32)
#define PLATFORM_STACK_SIZE 0x440
#endif
#define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
#define PLATFORM_MAX_AFFLVL MPIDR_AFFLVL2
#define PLATFORM_SYSTEM_COUNT 1
#define PLATFORM_CLUSTER_COUNT 2
#define PLATFORM_CLUSTER0_CORE_COUNT 4
#define PLATFORM_CLUSTER1_CORE_COUNT 4
#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \
PLATFORM_CLUSTER0_CORE_COUNT)
#define PLATFORM_MAX_CPUS_PER_CLUSTER 4
#define PLATFORM_NUM_AFFS (PLATFORM_SYSTEM_COUNT + \
PLATFORM_CLUSTER_COUNT + \
PLATFORM_CORE_COUNT)
#define PLAT_RK_CLST_TO_CPUID_SHIFT 8
#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL2
/*
* This macro defines the deepest retention state possible. A higher state
* id will represent an invalid or a power down state.
*/
#define PLAT_MAX_RET_STATE 1
/*
* This macro defines the deepest power down states possible. Any state ID
* higher than this is invalid.
*/
#define PLAT_MAX_OFF_STATE 2
/*******************************************************************************
* Platform memory map related constants
******************************************************************************/
/* TF txet, ro, rw, Size: 512KB */
#define TZRAM_BASE (0x0)
#define TZRAM_SIZE (0x80000)
/*******************************************************************************
* BL31 specific defines.
******************************************************************************/
/*
* Put BL3-1 at the top of the Trusted RAM
*/
#define BL31_BASE (TZRAM_BASE + 0x10000)
#define BL31_LIMIT (TZRAM_BASE + TZRAM_SIZE)
/*******************************************************************************
* Platform specific page table and MMU setup constants
******************************************************************************/
#define ADDR_SPACE_SIZE (1ull << 32)
#define MAX_XLAT_TABLES 8
#define MAX_MMAP_REGIONS 16
/*******************************************************************************
* Declarations and constants to access the mailboxes safely. Each mailbox is
* aligned on the biggest cache line size in the platform. This is known only
* to the platform as it might have a combination of integrated and external
* caches. Such alignment ensures that two maiboxes do not sit on the same cache
* line at any cache level. They could belong to different cpus/clusters &
* get written while being protected by different locks causing corruption of
* a valid mailbox address.
******************************************************************************/
#define CACHE_WRITEBACK_SHIFT 6
#define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
/*
* Define GICD and GICC and GICR base
*/
#define PLAT_RK_GICD_BASE RK3368_GICD_BASE
#define PLAT_RK_GICC_BASE RK3368_GICC_BASE
/*
* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
* terminology. On a GICv2 system or mode, the lists will be merged and treated
* as Group 0 interrupts.
*/
#define PLAT_RK_G1S_IRQS RK_G1S_IRQS
#define PLAT_RK_UART_BASE RK3368_UART2_BASE
#define PLAT_RK_UART_CLOCK RK3368_UART_CLOCK
#define PLAT_RK_UART_BAUDRATE RK3368_BAUDRATE
#define PLAT_RK_CCI_BASE CCI400_BASE
#define PLAT_RK_PRIMARY_CPU 0x0
#endif /* __PLATFORM_DEF_H__ */