blob: 7e2bebe25f0b5f0cdfa71ccb4ff4d6c13d26cd67 [file] [log] [blame]
/*
* Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
#include <bl31.h>
#include <bl_common.h>
#include <console.h>
#include <cortex_a57.h>
#include <cortex_a53.h>
#include <debug.h>
#include <errno.h>
#include <memctrl.h>
#include <mmio.h>
#include <platform.h>
#include <platform_def.h>
#include <stddef.h>
#include <tegra_private.h>
/*******************************************************************************
* Declarations of linker defined symbols which will help us find the layout
* of trusted SRAM
******************************************************************************/
extern unsigned long __RO_START__;
extern unsigned long __RO_END__;
extern unsigned long __BL31_END__;
#if USE_COHERENT_MEM
extern unsigned long __COHERENT_RAM_START__;
extern unsigned long __COHERENT_RAM_END__;
#endif
extern uint64_t tegra_bl31_phys_base;
/*
* The next 3 constants identify the extents of the code, RO data region and the
* limit of the BL3-1 image. These addresses are used by the MMU setup code and
* therefore they must be page-aligned. It is the responsibility of the linker
* script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols
* refer to page-aligned addresses.
*/
#define BL31_RO_BASE (unsigned long)(&__RO_START__)
#define BL31_RO_LIMIT (unsigned long)(&__RO_END__)
#define BL31_END (unsigned long)(&__BL31_END__)
#if USE_COHERENT_MEM
/*
* The next 2 constants identify the extents of the coherent memory region.
* These addresses are used by the MMU setup code and therefore they must be
* page-aligned. It is the responsibility of the linker script to ensure that
* __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
* refer to page-aligned addresses.
*/
#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
#endif
static entry_point_info_t bl33_image_ep_info, bl32_image_ep_info;
static plat_params_from_bl2_t plat_bl31_params_from_bl2 = {
.tzdram_size = (uint64_t)TZDRAM_SIZE
};
/*******************************************************************************
* This variable holds the non-secure image entry address
******************************************************************************/
extern uint64_t ns_image_entrypoint;
/*******************************************************************************
* Return a pointer to the 'entry_point_info' structure of the next image for
* security state specified. BL33 corresponds to the non-secure image type
* while BL32 corresponds to the secure image type.
******************************************************************************/
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
if (type == NON_SECURE)
return &bl33_image_ep_info;
if (type == SECURE)
return &bl32_image_ep_info;
return NULL;
}
/*******************************************************************************
* Return a pointer to the 'plat_params_from_bl2_t' structure. The BL2 image
* passes this platform specific information.
******************************************************************************/
plat_params_from_bl2_t *bl31_get_plat_params(void)
{
return &plat_bl31_params_from_bl2;
}
/*******************************************************************************
* Perform any BL31 specific platform actions. Populate the BL33 and BL32 image
* info.
******************************************************************************/
void bl31_early_platform_setup(bl31_params_t *from_bl2,
void *plat_params_from_bl2)
{
plat_params_from_bl2_t *plat_params =
(plat_params_from_bl2_t *)plat_params_from_bl2;
/*
* Configure the UART port to be used as the console
*/
console_init(TEGRA_BOOT_UART_BASE, TEGRA_BOOT_UART_CLK_IN_HZ,
TEGRA_CONSOLE_BAUDRATE);
/* Initialise crash console */
plat_crash_console_init();
/*
* Copy BL3-3, BL3-2 entry point information.
* They are stored in Secure RAM, in BL2's address space.
*/
bl33_image_ep_info = *from_bl2->bl33_ep_info;
bl32_image_ep_info = *from_bl2->bl32_ep_info;
/*
* Parse platform specific parameters - TZDRAM aperture size
*/
if (plat_params)
plat_bl31_params_from_bl2.tzdram_size = plat_params->tzdram_size;
}
/*******************************************************************************
* Initialize the gic, configure the SCR.
******************************************************************************/
void bl31_platform_setup(void)
{
uint32_t tmp_reg;
/*
* Initialize delay timer
*/
tegra_delay_timer_init();
/*
* Setup secondary CPU POR infrastructure.
*/
plat_secondary_setup();
/*
* Initial Memory Controller configuration.
*/
tegra_memctrl_setup();
/*
* Do initial security configuration to allow DRAM/device access.
*/
tegra_memctrl_tzdram_setup(tegra_bl31_phys_base,
plat_bl31_params_from_bl2.tzdram_size);
/* Set the next EL to be AArch64 */
tmp_reg = SCR_RES1_BITS | SCR_RW_BIT;
write_scr(tmp_reg);
/* Initialize the gic cpu and distributor interfaces */
tegra_gic_setup();
}
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this only intializes the mmu in a quick and dirty way.
******************************************************************************/
void bl31_plat_arch_setup(void)
{
unsigned long bl31_base_pa = tegra_bl31_phys_base;
unsigned long total_base = bl31_base_pa;
unsigned long total_size = BL32_BASE - BL31_RO_BASE;
unsigned long ro_start = bl31_base_pa;
unsigned long ro_size = BL31_RO_LIMIT - BL31_RO_BASE;
const mmap_region_t *plat_mmio_map = NULL;
#if USE_COHERENT_MEM
unsigned long coh_start, coh_size;
#endif
/* add memory regions */
mmap_add_region(total_base, total_base,
total_size,
MT_MEMORY | MT_RW | MT_SECURE);
mmap_add_region(ro_start, ro_start,
ro_size,
MT_MEMORY | MT_RO | MT_SECURE);
#if USE_COHERENT_MEM
coh_start = total_base + (BL31_COHERENT_RAM_BASE - BL31_RO_BASE);
coh_size = BL31_COHERENT_RAM_LIMIT - BL31_COHERENT_RAM_BASE;
mmap_add_region(coh_start, coh_start,
coh_size,
MT_DEVICE | MT_RW | MT_SECURE);
#endif
/* add MMIO space */
plat_mmio_map = plat_get_mmio_map();
if (plat_mmio_map)
mmap_add(plat_mmio_map);
else
WARN("MMIO map not available\n");
/* set up translation tables */
init_xlat_tables();
/* enable the MMU */
enable_mmu_el3(0);
}
/*******************************************************************************
* Check if the given NS DRAM range is valid
******************************************************************************/
int bl31_check_ns_address(uint64_t base, uint64_t size_in_bytes)
{
uint64_t end = base + size_in_bytes - 1;
/*
* Check if the NS DRAM address is valid
*/
if ((base < TEGRA_DRAM_BASE) || (end > TEGRA_DRAM_END) ||
(base >= end)) {
ERROR("NS address is out-of-bounds!\n");
return -EFAULT;
}
/*
* TZDRAM aperture contains the BL31 and BL32 images, so we need
* to check if the NS DRAM range overlaps the TZDRAM aperture.
*/
if ((base < TZDRAM_END) && (end > tegra_bl31_phys_base)) {
ERROR("NS address overlaps TZDRAM!\n");
return -ENOTSUP;
}
/* valid NS address */
return 0;
}