Platforms/HiKey960: enable gpio controller
Support gpio controller in HiKey960 platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
diff --git a/Platforms/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c b/Platforms/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
new file mode 100644
index 0000000..7c61ff7
--- /dev/null
+++ b/Platforms/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
@@ -0,0 +1,77 @@
+/** @file
+*
+* Copyright (c) 2017, Linaro. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+
+GPIO_CONTROLLER gGpioDevice[]= {
+ { 0xe8a0b000, 0, 8 }, // GPIO0
+ { 0xe8a0c000, 8, 8 }, // GPIO1
+ { 0xe8a0d000, 16, 8 }, // GPIO2
+ { 0xe8a0e000, 24, 8 }, // GPIO3
+ { 0xe8a0f000, 32, 8 }, // GPIO4
+ { 0xe8a10000, 40, 8 }, // GPIO5
+ { 0xe8a11000, 48, 8 }, // GPIO6
+ { 0xe8a12000, 56, 8 }, // GPIO7
+ { 0xe8a13000, 64, 8 }, // GPIO8
+ { 0xe8a14000, 72, 8 }, // GPIO9
+ { 0xe8a15000, 80, 8 }, // GPIO10
+ { 0xe8a16000, 88, 8 }, // GPIO11
+ { 0xe8a17000, 96, 8 }, // GPIO12
+ { 0xe8a18000, 104, 8 }, // GPIO13
+ { 0xe8a19000, 112, 8 }, // GPIO14
+ { 0xe8a1a000, 120, 8 }, // GPIO15
+ { 0xe8a1b000, 128, 8 }, // GPIO16
+ { 0xe8a1c000, 136, 8 }, // GPIO17
+ { 0xff3b4000, 144, 8 }, // GPIO18
+ { 0xff3b5000, 152, 8 }, // GPIO19
+ { 0xe8a1f000, 160, 8 }, // GPIO20
+ { 0xe8a20000, 168, 8 }, // GPIO21
+ { 0xfff0b000, 176, 8 }, // GPIO22
+ { 0xfff0c000, 184, 8 }, // GPIO23
+ { 0xfff0d000, 192, 8 }, // GPIO24
+ { 0xfff0e000, 200, 8 }, // GPIO25
+ { 0xfff0f000, 208, 8 }, // GPIO26
+ { 0xfff10000, 216, 8 }, // GPIO27
+ { 0xfff1d000, 224, 8 }, // GPIO28
+};
+
+PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = {
+ 232, 29, gGpioDevice
+};
+
+EFI_STATUS
+EFIAPI
+HiKey960GpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ // Install the Embedded Platform GPIO Protocol onto a new handle
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gPlatformGpioProtocolGuid, &gPlatformGpioDevice,
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ }
+
+ return Status;
+}
diff --git a/Platforms/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf b/Platforms/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
new file mode 100644
index 0000000..9160afe
--- /dev/null
+++ b/Platforms/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
@@ -0,0 +1,37 @@
+#
+# Copyright (c) 2017, Linaro. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = HiKey960Gpio
+ FILE_GUID = 6aa12592-7e36-4aec-acf8-2ac2fd13815c
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKey960GpioEntryPoint
+
+[Sources.common]
+ HiKey960GpioDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ OpenPlatformPkg/Platforms/Hisilicon/HiKey960/HiKey960.dec
+
+[LibraryClasses]
+ DebugLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gPlatformGpioProtocolGuid
+
+[Depex]
+ TRUE
