| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2012, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| |
| <!-- Default color for notification LED is white. --> |
| <color name="config_defaultNotificationColor">#ffffffff</color> |
| |
| <!-- Default LED on time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOn">1000</integer> |
| |
| <!-- Default LED off time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOff">9000</integer> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">true</bool> |
| |
| <!-- Flag indicating whether the we should enable the automatic brightness in Settings. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N 1 zones as follows: |
| |
| Zone 0: 0 <= LUX < array[0] |
| Zone 1: array[0] <= LUX < array[1] |
| ... |
| Zone N: array[N - 1] <= LUX < array[N] |
| Zone N + 1 array[N] <= LUX < infinity |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| <item>3</item> |
| <item>50</item> |
| <item>100</item> |
| <item>200</item> |
| <item>400</item> |
| <item>500</item> |
| <item>800</item> |
| <item>1000</item> |
| <item>1600</item> |
| <item>3000</item> |
| <item>10000</item> |
| </integer-array> |
| |
| <!-- Array of output values for LCD backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues"> |
| <item>29</item> <!-- 0-3 --> |
| <item>38</item> <!-- 3-50 --> |
| <item>47</item> <!-- 50-100 --> |
| <item>63</item> <!-- 100-200 --> |
| <item>85</item> <!-- 200-400 --> |
| <item>94</item> <!-- 400-500 --> |
| <item>110</item> <!-- 500-800 --> |
| <item>126</item> <!-- 800-1000 --> |
| <item>162</item> <!-- 1000-1600 --> |
| <item>196</item> <!-- 1600-3000 --> |
| <item>250</item> <!-- 3000-10000 --> |
| <item>255</item> <!-- 10000+ --> |
| </integer-array> |
| |
| <!-- Array of output values for button backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessButtonBacklightValues"> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| </integer-array> |
| |
| <!-- Minimum screen brightness allowed by the power manager. --> |
| <integer name="config_screenBrightnessDim">1</integer> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| USB interfaces. If the device doesn't want to support tething over USB this should |
| be empty. An example would be "usb.*" --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| <item>"usb\\d"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| <item>"wlan0"</item> |
| <item>"softap.*"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this |
| should be empty. --> |
| <string-array translatable="false" name="config_tether_bluetooth_regexs"> |
| <item>"bt-pan"</item> |
| </string-array> |
| |
| <!-- Array of allowable ConnectivityManager network types for tethering --> |
| <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or |
| [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH --> |
| <integer-array translatable="false" name="config_tether_upstream_types"> |
| <item>0</item> |
| <item>1</item> |
| <item>5</item> |
| <item>7</item> |
| </integer-array> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| <string-array name="config_overlay_locationProviderPackageNames" translatable="false"> |
| <item>com.google.android.location</item> |
| </string-array> |
| |
| <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> |
| <bool translatable="false" name="config_wifi_dual_band_support">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset has background scan support --> |
| <bool translatable="false" name="config_wifi_background_scan_support">true</bool> |
| |
| <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> |
| <bool name="config_intrusiveNotificationLed">true</bool> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,2,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_dun,4,0,2,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"mobile_fota,10,0,2,60000,true"</item> |
| <item>"mobile_ims,11,0,2,60000,true"</item> |
| <item>"mobile_cbs,12,0,2,60000,true"</item> |
| <item>"wifi_p2p,13,1,0,-1,true"</item> |
| <item>"bluetooth,7,7,2,-1,true"</item> |
| </string-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| <item>"7,1"</item> |
| </string-array> |
| |
| <!-- Vibrator pattern for feedback about touching a virtual key --> |
| <integer-array name="config_virtualKeyVibePattern"> |
| <item>20</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> |
| <integer-array name="config_keyboardTapVibePattern"> |
| <item>20</item> |
| </integer-array> |
| |
| <!-- enable screen saver feature --> |
| <bool name="config_enableDreams">true</bool> |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true --> |
| <bool translatable="false" name="skip_restoring_network_selection">true</bool> |
| |
| <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> |
| <bool name="config_cellBroadcastAppLinks">true</bool> |
| |
| <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. --> |
| <integer name="config_shutdownBatteryTemperature">600</integer> |
| |
| <bool name="config_ui_enableFadingMarquee">false</bool> |
| |
| </resources> |
