mako: NFC: Include NFC product files, NFCEE access files.
- Moved device node owner/mode settings to ueventd
- Create necessary /data/nfc and /data/nfc/param dirs for NVstorage
- Added required NFC product packages
- Added nfcee access files, to allow Google Wallet access.
Change-Id: Ib8ec711288498baf16eea532523a57eb668c56ad
diff --git a/device.mk b/device.mk
index f5f7834..fc5d83f 100644
--- a/device.mk
+++ b/device.mk
@@ -96,13 +96,39 @@
frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \
frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
- frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \
frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \
frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml
# packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:system/etc/permissions/android.software.live_wallpaper.xml
+# NFC packages
+PRODUCT_PACKAGES += \
+ libnfc-nci \
+ libnfc_nci_jni \
+ NfcNci \
+ Tag \
+ com.android.nfc_extras
+
+# NFCEE access control
+ifeq ($(TARGET_BUILD_VARIANT),user)
+ NFCEE_ACCESS_PATH := device/lge/mako/nfc/nfcee_access.xml
+else
+ NFCEE_ACCESS_PATH := device/lge/mako/nfc/nfcee_access_debug.xml
+endif
+
+# NFC access control + feature files + configuration
+PRODUCT_COPY_FILES += \
+ $(NFCEE_ACCESS_PATH):system/etc/nfcee_access.xml \
+ frameworks/native/data/etc/com.android.nfc_extras.xml:system/etc/permissions/com.android.nfc_extras.xml \
+ frameworks/native/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \
+ device/lge/mako/nfc/libnfc-brcm.conf:system/etc/libnfc-brcm.conf
+
+# NFC firmware for BCM2079x
+PRODUCT_COPY_FILES += \
+ hardware/broadcom/nfc/bcm2079x/bcm2079x_firmware.ncd:system/vendor/firmware/bcm2079x_firmware.ncd \
+ hardware/broadcom/nfc/bcm2079x/bcm2079x_pre_firmware.ncd:system/vendor/firmware/bcm2079x_pre_firmware.ncd
+
PRODUCT_PROPERTY_OVERRIDES += \
ro.opengles.version=131072
diff --git a/init.mako.rc b/init.mako.rc
index 901e91a..18a4322 100644
--- a/init.mako.rc
+++ b/init.mako.rc
@@ -113,10 +113,9 @@
write /proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra 2
-# NFC Feature
- chmod 0600 /dev/bcm2079x-i2c
- chown nfc system /dev/bcm2079x-i2c
- setprop ro.nfc.port I2C
+# NFC: create data/nfc for nv storage
+ mkdir /data/nfc 770 nfc nfc
+ mkdir /data/nfc/param 770 nfc nfc
# msm specific files that need to be created on /data
on post-fs-data
diff --git a/nfc/libnfc-brcm.conf b/nfc/libnfc-brcm.conf
new file mode 100644
index 0000000..cdfb8bb
--- /dev/null
+++ b/nfc/libnfc-brcm.conf
@@ -0,0 +1,311 @@
+###################### Start of libnfc-brcm-common.conf #######################
+
+###############################################################################
+# Application options
+APPL_TRACE_LEVEL=0x00
+PROTOCOL_TRACE_LEVEL=0x00000000
+
+###############################################################################
+# JNI Version
+# This should match the version of Android you are using. This allows the
+# JNI layer to dynamically support multiple versions of Android from one
+# binary. Valid values are (234, 235, 236, 237, 401 and 403). Default is NFCA
+# native version.
+#JNI_VERSION=403
+
+###############################################################################
+# performance measurement
+# Change this setting to control how often USERIAL log the performance (throughput)
+# data on read/write/poll
+# defailt is to log performance dara for every 100 read or write
+#REPORT_PERFORMANCE_MEASURE=100
+
+###############################################################################
+# Broadcom NFC Extras API
+# Uncomment to disable Broadcom NFC Extras API. NfcService must be modified
+# to recognize this API. This API is available with JNI version 401 or higher.
+# The default is enabled.
+#ENABLE_BRCM_EXTRAS_API=0
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# Sleep (a.k.a. Snooze) Mode
+#
+# By default sleep mode is enabled. Set NFA_DM_ENABLE_SLEEP
+# to 0 to disable.
+#
+# If NFA_DM_LP_CFG is not provided, stack default settings are
+# used (see nfa_dm_brcm_cfg.c). They are as follows:
+# 8 Sleep Mode (1=UART 8=SPI/I2C)
+# 0 NFC Wake active mode (0=ActiveLow 1=ActiveHigh)
+# 1 Host Wake active mode (0=ActiveLow 1=ActiveHigh)
+#
+#NFA_DM_ENABLE_SLEEP=0
+#NFA_DM_LP_CFG={08:00:01}
+
+###############################################################################
+# Insert a delay in milliseconds after NFC_WAKE and before write to NFCC
+NFC_WAKE_DELAY=20
+
+###############################################################################
+# Device Manager Config
+#
+# If NFA_DM_CFG is not provided, stack default settings are
+# used (see nfa_dm_cfg.c). They are as follows:
+# 500ms (0x1F4) Total duration when busy polling
+# 1000ms (0x3E8) Total duration when background polling
+# 0 (FALSE) Automatic NDEF detection when background polling
+# 0 (FALSE) Automatic NDEF read when background polling
+#
+#NFA_DM_CFG={F401:E803:00:00}
+
+###############################################################################
+# LPTD mode configuration (effective NFCA 403.10.0.34)
+# byte[0] is the length of the parameters
+# if set to 0, LPTD params will NOT be sent to NFCC (i.e. disabled).
+# byte[1] indicates if LPTD is enabled
+# if set to 0, LPTD will be disabled.
+# byte[2-n] are the LPTD parameters.
+# By default, LPTD is enabled and default settings are used.
+# See nfa_dm_brcm_cfg.c for defaults
+LPTD_CFG={21:01:02:FF:FF:80:40:00:40:00:80:00:00:10:00:00:00:71:0D:2C:00:00:00:00:00:00:00:00:00:00:00:00:00:00}
+
+###############################################################################
+# Startup Configuration (100 bytes maximum)
+#
+# For the 0xCA parameter, byte[9] (marked by 'AA') is for UICC0, and byte[10] (marked by BB) is
+# for UICC1. The values are defined as:
+# 0 : UICCx only supports ISO_DEP in low power mode.
+# 2 : UICCx only supports Mifare in low power mode.
+# 3 : UICCx supports both ISO_DEP and Mifare in low power mode.
+#
+# AA BB
+NFA_DM_START_UP_CFG={1C:CB:01:01:A5:01:01:CA:14:00:00:00:00:02:E8:03:00:00:00:00:00:00:00:00:00:00:00:00:00}
+
+###############################################################################
+# Startup Vendor Specific Configuration (100 bytes maximum)
+# byte[0] is the length of the parameters
+# byte[1] Start of first TLV
+# byte[2] Length of first TLV
+#
+#NFA_DM_START_UP_VSC_CFG={03:17:01:01} # configure ARM JTAG
+#NFA_DM_START_UP_VSC_CFG={04:09:02:01:01} # debug logging (byte[3]:RF Frames, byte[4]:SWP Frames)
+
+###############################################################################
+# DTA Start Configuration (30 bytes maximum)
+#
+# The first byte is the length of the TLV's.
+#DTA_START_CFG={05:C9:03:40:00:00}
+
+###############################################################################
+# Antenna Configuration - This data is used when setting 0xC8 config item
+# at startup (before discovery is started). If not used, no value is sent.
+#
+# The settings for this value are documented here:
+# http://wcgbu.broadcom.com/wpan/PM/Project%20Document%20Library/bcm20791B0/
+# Design/Doc/PHY%20register%20settings/BCM20791-B2-1027-02_PHY_Recommended_Reg_Settings.xlsx
+# This document is maintained by Paul Forshaw.
+#
+# The values marked as ?? should be tweaked per antenna or customer/app:
+# {06:??:00:??:??:??:00:??:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:??:01:00:00:40:04}
+#
+#PREINIT_DSP_CFG={06:1F:00:0F:03:3C:00:04:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:48:01:00:00:40:04}
+
+###############################################################################
+# Configure Xtal Index (for when internal LPO can't
+# detect xtal frequency)
+#NFA_CONFIG_XTAL_INDEX=0x4
+
+###############################################################################
+# Use Nexus S NXP RC work to allow our stack/firmware to work with a retail
+# Nexus S that causes IOP issues. Note, this will not pass conformance and
+# should be removed for production.
+USE_NXP_P2P_RC_WORKAROUND=1
+
+###############################################################################
+# Configure the default Destination Gate used by HCI (the default is 4, which
+# is the ETSI loopback gate.
+#NFA_HCI_DEFAULT_DEST_GATE=0x04
+
+###############################################################################
+# Configure the single default SE to use. The default is to use the first
+# SE that is detected by the stack. This value might be used when the phone
+# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
+# one of them (e.g. 0xF4).
+#ACTIVE_SE=0xF3
+
+###############################################################################
+# Configure the NFC Extras to open and use a static pipe. If the value is
+# not set or set to 0, then the default is use a dynamic pipe based on a
+# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
+# for each UICC (where F3="UICC0" and F4="UICC1")
+#NFA_HCI_STATIC_PIPE_ID_F3=0x70
+NFA_HCI_STATIC_PIPE_ID_F4=0x71
+
+###############################################################################
+# Force UICC to only listen to the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B.
+#UICC_LISTEN_TECH_MASK=0x03
+
+###############################################################################
+# Allow UICC to be powered off if there is no traffic.
+# Timeout is in ms. If set to 0, then UICC will not be powered off.
+#UICC_IDLE_TIMEOUT=30000
+
+###############################################################################
+# Force tag polling for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_A_ACTIVE |
+# NFA_TECHNOLOGY_MASK_F_ACTIVE.
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_KOVIO 0x20
+# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40
+# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80
+#POLLING_TECH_MASK=0xDF
+POLLING_TECH_MASK=0x1F # Have active mode disabled.
+
+###############################################################################
+# Force P2P to only listen for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
+# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
+#P2P_LISTEN_TECH_MASK=0xC5
+P2P_LISTEN_TECH_MASK=0x05 # Have active mode disabled.
+
+###############################################################################
+# This setting allows you to disable registering the T4t Virtual SE that causes
+# the NFCC to send PPSE requests to the DH.
+# The default setting is enabled (i.e. T4t Virtual SE is registered).
+#REGISTER_VIRTUAL_SE=1
+
+###############################################################################
+# When screen is turned off, specify the desired power state of the controller.
+# 0: power-off-sleep state; DEFAULT
+# 1: full-power state
+# 2: screen-off card-emulation level-4 power state (CE4)
+#SCREEN_OFF_POWER_STATE=0
+
+###############################################################################
+# Enable sendig VBAT_MONITOR_CMD to NFCC before entering CEx mode
+# 0: do not send VBAT_MONITOR_CMD
+# 1: send VBAT_MONITOR_CMD before entering CEx mode
+#SEND_VBAT_MONITOR_CMD=1
+
+###############################################################################
+# VBAT_MONITOR_CMD uses two threshold values Primary and secondary
+# First byte 0x05 set the primary threshold voltage to 3v
+# Second byte 0x08 set the secondary threshold voltage to 3.2v
+# Primary Threshold: 0 - 7 representing below voltages:
+# {2, 2.2, 2.7, 2.8, 2.9, 3, 3.1, 3.2}
+# Secondary Threshold: 0 - 15 representing below voltages:
+# {5.2, 4.87, 4.54, 4.22, 3.9, 3.73, 3.57, 3.4,
+# 3.2, 3.1, 3.0, 2.9, 2.8, 2.7, 2.2, 2.0}
+#VBAT_MONITOR_THRESHOLD=0x0508
+
+####################### End of libnfc-brcm-common.conf ########################
+
+################### Start of libnfc-brcm-transport-i2c.conf ###################
+
+###############################################################################
+# Firmware patch file
+# If the value is not set then patch download is disabled.
+FW_PATCH="/vendor/firmware/bcm2079x_firmware.ncd"
+
+###############################################################################
+# Firmware I2C Fix patch file (sent before the above patch file)
+# If the value is not set then I2C Fix patch is not used.
+FW_PRE_PATCH="/vendor/firmware/bcm2079x_pre_firmware.ncd"
+
+###############################################################################
+# Firmware patch format
+# 1 = HCD
+# 2 = NCD (default)
+#NFA_CONFIG_FORMAT=2
+
+###############################################################################
+# transport driver
+#
+# TRANSPORT_DRIVER=<driver>
+#
+# where <driver> can be, for example:
+# "/dev/ttyS" (UART)
+# "/dev/bcmi2cnfc" (I2C)
+# "hwtun" (HW Tunnel)
+# "/dev/bcmspinfc" (SPI)
+# "/dev/btusb0" (BT USB)
+TRANSPORT_DRIVER="/dev/bcm2079x-i2c"
+
+###############################################################################
+# power control driver
+# Specify a kernel driver that support ioctl commands to control NFC_EN and
+# NFC_WAKE gpio signals.
+#
+# POWER_CONTRL_DRIVER=<driver>
+# where <driver> can be, for example:
+# "/dev/nfcpower"
+# "/dev/bcmi2cnfc" (I2C)
+# "/dev/bcmspinfc" (SPI)
+# i2c and spi driver may be used to control NFC_EN and NFC_WAKE signal
+POWER_CONTROL_DRIVER="/dev/bcm2079x-i2c"
+
+###############################################################################
+# I2C transport driver options
+# Mako does not support 10-bit I2C addresses
+# Revert to 7-bit address
+BCMI2CNFC_ADDRESS=0x77
+
+###############################################################################
+# I2C transport driver try to read multiple packets in read() if data is available
+# remove the comment below to enable this feature
+#READ_MULTIPLE_PACKETS=1
+
+###############################################################################
+# SPI transport driver options
+
+###############################################################################
+# UART transport driver options
+#
+# PORT=1,2,3,...
+# BAUD=115200, 19200, 9600, 4800,
+# DATABITS=8, 7, 6, 5
+# PARITY="even" | "odd" | "none"
+# STOPBITS="0" | "1" | "1.5" | "2"
+
+#UART_PORT=2
+#UART_BAUD=115200
+#UART_DATABITS=8
+#UART_PARITY="none"
+#UART_STOPBITS="1"
+
+###############################################################################
+# Tunnel transport driver options
+# For use when TRANSPORT_DRIVER="hwtun" (see above)
+
+#TUNNEL_ADDR="10.0.2.2"
+#TUNNEL_PORT=0x3e8
+
+###############################################################################
+# Insert a delay in microseconds per byte after a write to NFCC.
+# after writing a block of data to the NFCC, delay this an amopunt of time before
+# writing next block of data. the delay is calculated as below
+# NFC_WRITE_DELAY * (number of byte written) / 1000 milliseconds
+# e.g. after 259 bytes is written, delay (259 * 20 / 1000) 5 ms before next write
+NFC_WRITE_DELAY=20
+
+#################### End of libnfc-brcm-transport-i2c.conf ####################
+
+################### Start of libnfc-brcm-fwfsm-enabled.conf ###################
+
+###############################################################################
+# Multi-technology (default is enabled)
+#NFA_DM_MULTI_TECH_RESP=0
+
+#################### End of libnfc-brcm-fwfsm-enabled.conf ####################
+
diff --git a/nfc/nfcee_access.xml b/nfc/nfcee_access.xml
new file mode 100644
index 0000000..02e12fd
--- /dev/null
+++ b/nfc/nfcee_access.xml
@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+ <!-- Applications granted NFCEE access on user builds
+
+ See packages/apps/Nfc/etc/sample_nfcee_access.xml for full documentation.
+ -->
+
+ <!-- Google wallet release signature -->
+ <signer android:signature="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" />
+
+</resources>
diff --git a/nfc/nfcee_access_debug.xml b/nfc/nfcee_access_debug.xml
new file mode 100644
index 0000000..a96a2d1
--- /dev/null
+++ b/nfc/nfcee_access_debug.xml
@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="utf-8"?>
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+ <!-- Applications granted NFCEE access on userdebug/eng builds
+
+ See packages/apps/Nfc/etc/sample_nfcee_access.xml for full documentation.
+ -->
+
+ <!-- Google Wallet dev signature -->
+ <signer android:signature="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" />
+
+ <!-- Google wallet release signature -->
+ <signer android:signature="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" />
+
+ <!-- Platform dev-keys signature -->
+ <signer android:signature="308204a830820390a003020102020900bcdfe81405d5c69e300d06092a864886f70d0101050500308194310b3009060355040613025553311330110603550408130a43616c69666f726e6961311630140603550407130d4d6f756e7461696e20566965773110300e060355040a1307416e64726f69643110300e060355040b1307416e64726f69643110300e06035504031307416e64726f69643122302006092a864886f70d0109011613616e64726f696440616e64726f69642e636f6d301e170d3131303931393230303634325a170d3339303230343230303634325a308194310b3009060355040613025553311330110603550408130a43616c69666f726e6961311630140603550407130d4d6f756e7461696e20566965773110300e060355040a1307416e64726f69643110300e060355040b1307416e64726f69643110300e06035504031307416e64726f69643122302006092a864886f70d0109011613616e64726f696440616e64726f69642e636f6d30820120300d06092a864886f70d01010105000382010d00308201080282010100ef7a8a34d8151d0479a239903261fe5026c520d5d88cd65920c98e096d2770f49636da9ffc4e80c472b05bd62a435f8266912aa2a34a18f6f4856f9ef52c10b88c267627136726823e8f3389b051ba92920e10bbaae0e38879efbe681b05863b655d81a6f3b75a85eb230b38b23ea4ef56f2161ff01652ae2049881adbe60d3bf8b5386a81f7404c0cf0c111c0a35ab0a9760426e4af12add73327ec433e047e3517f47a2d3674c2b819354d56eb7fd6c9aa67dd05b4bb1ca8a7e1946c2494e9364ea677a25481ac81f434bff3dd56e93e59fccef0e24a753461cd1cf15f22b62251d07416057ac5ca3e03a24f7f4eca876bacc5a1828acbde04c5cfdb608c47020103a381fc3081f9301d0603551d0e0416041402f997668541fa74693bea699a5766893a362a5d3081c90603551d230481c13081be801402f997668541fa74693bea699a5766893a362a5da1819aa48197308194310b3009060355040613025553311330110603550408130a43616c69666f726e6961311630140603550407130d4d6f756e7461696e20566965773110300e060355040a1307416e64726f69643110300e060355040b1307416e64726f69643110300e06035504031307416e64726f69643122302006092a864886f70d0109011613616e64726f696440616e64726f69642e636f6d820900bcdfe81405d5c69e300c0603551d13040530030101ff300d06092a864886f70d0101050500038201010047d6fb32cadeae4444c379b3441ff9ba10990c23d10472c54fb7ebd9c33b2a173836337e1c175c980847a8894f6a99782e9c2e2133629254295fe52749f93ec1e39d213dd06d0ba99de3b6b5d4d856fafe74e08113b7b23a1b56f4918ed41218a03b9564456480b665200267d3770a9463db413c6a47bd81d725cb7d39c9d0941693c59cbe727d40415f0815c3c8363fb8fa2e028ceeb3bbfbc6b119db5b72f0edb0bb417bfcbf74d9fa069de22afe56a50bcde7ea1078749bb9ec0adc0e6de045641ee3a82c576645160b4ab9710d3cb3201f23957da8de9084c0bec93ad1c8c2054195f13c926db07c8bdf15673acf6d791ec1d3a0d7e1b3470447acd95873" />
+
+</resources>
diff --git a/ueventd.mako.rc b/ueventd.mako.rc
index 7d1229d..f9f5297 100644
--- a/ueventd.mako.rc
+++ b/ueventd.mako.rc
@@ -33,3 +33,4 @@
/dev/msm_camera/* 0660 system camera
/dev/gemini* 0660 system camera
/dev/msm_dsps 0600 system system
+/dev/bcm2079x-i2c 0660 nfc nfc
