| # |
| # Copyright (C) 2015 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| TARGET_BOARD_PLATFORM := msm8994 |
| TARGET_BOOTLOADER_BOARD_NAME := angler |
| |
| TARGET_ARCH := arm64 |
| TARGET_ARCH_VARIANT := armv8-a |
| TARGET_CPU_ABI := arm64-v8a |
| TARGET_CPU_ABI2 := |
| TARGET_CPU_VARIANT := cortex-a53 |
| |
| TARGET_2ND_ARCH := arm |
| TARGET_2ND_ARCH_VARIANT := armv8-a |
| TARGET_2ND_CPU_ABI := armeabi-v7a |
| TARGET_2ND_CPU_ABI2 := armeabi |
| TARGET_2ND_CPU_VARIANT := cortex-a53.a57 |
| |
| BOARD_KERNEL_BASE := 0x00000000 |
| BOARD_KERNEL_PAGESIZE := 4096 |
| BOARD_KERNEL_TAGS_OFFSET := 0x01E00000 |
| BOARD_RAMDISK_OFFSET := 0x02000000 |
| |
| BOARD_KERNEL_CMDLINE := androidboot.hardware=angler androidboot.console=ttyHSL0 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 boot_cpus=0-3 no_console_suspend |
| BOARD_KERNEL_CMDLINE += loop.max_part=7 |
| |
| BOARD_MKBOOTIMG_ARGS := --ramdisk_offset $(BOARD_RAMDISK_OFFSET) --tags_offset $(BOARD_KERNEL_TAGS_OFFSET) |
| |
| BOARD_USES_ALSA_AUDIO := true |
| BOARD_HAVE_BLUETOOTH := true |
| BOARD_HAVE_BLUETOOTH_BCM := true |
| BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/huawei/angler/bluetooth |
| |
| BOARD_USES_SECURE_SERVICES := true |
| |
| TARGET_NO_BOOTLOADER := true |
| TARGET_NO_RADIOIMAGE := true |
| TARGET_BOARD_INFO_FILE := device/huawei/angler/board-info.txt |
| TARGET_NO_RPC := true |
| |
| BOARD_EGL_CFG := device/huawei/angler/egl.cfg |
| |
| # Shader cache config options |
| # Maximum size of the GLES Shaders that can be cached for reuse. |
| # Increase the size if shaders of size greater than 12KB are used. |
| MAX_EGL_CACHE_KEY_SIZE := 12*1024 |
| |
| # Maximum GLES shader cache size for each app to store the compiled shader |
| # binaries. Decrease the size if RAM or Flash Storage size is a limitation |
| # of the device. |
| MAX_EGL_CACHE_SIZE := 2048*1024 |
| |
| USE_OPENGL_RENDERER := true |
| TARGET_USES_ION := true |
| TARGET_USES_C2D_COMPOSITION := true |
| TARGET_USES_GRALLOC1_ADAPTER := true |
| TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true |
| MAX_VIRTUAL_DISPLAY_DIMENSION := 2048 |
| TARGET_USES_HWC2 := true |
| VSYNC_EVENT_PHASE_OFFSET_NS := 2000000 |
| SF_VSYNC_EVENT_PHASE_OFFSET_NS := 6000000 |
| NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3 |
| |
| HAVE_ADRENO_SOURCE:= false |
| |
| OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so |
| BOARD_CHARGER_DISABLE_INIT_BLANK := true |
| # Enable auto suspend in poweroff charging to save power |
| BOARD_CHARGER_ENABLE_SUSPEND := true |
| |
| TARGET_USERIMAGES_USE_EXT4 := true |
| BOARD_BOOTIMAGE_PARTITION_SIZE := 33554432 |
| BOARD_RECOVERYIMAGE_PARTITION_SIZE := 33554432 |
| BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472 |
| BOARD_SYSTEMIMAGE_JOURNAL_SIZE := 0 |
| # as of 3765811, inode usage was xxxx, use 4096 to be safe |
| BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT := 4096 |
| BOARD_USERDATAIMAGE_PARTITION_SIZE := 26503790080 |
| BOARD_CACHEIMAGE_PARTITION_SIZE := 104857600 |
| BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4 |
| BOARD_FLASH_BLOCK_SIZE := 131072 |
| |
| TARGET_AUX_OS_VARIANT_LIST := angler |
| |
| TARGET_RECOVERY_FSTAB = device/huawei/angler/fstab.angler |
| TARGET_COPY_OUT_VENDOR := vendor |
| TARGET_RELEASETOOLS_EXTENSIONS := device/huawei/angler |
| |
| BOARD_SEPOLICY_DIRS += \ |
| device/huawei/angler/sepolicy |
| |
| TARGET_USES_64_BIT_BINDER := true |
| |
| TARGET_USES_AOSP := true |
| |
| TARGET_USES_INTERACTION_BOOST := true |
| |
| TARGET_RECOVERY_UI_LIB := librecovery_ui_nanohub |
| |
| # Force camera module to be compiled only in 32-bit mode on 64-bit systems |
| # Once camera module can run in the native mode of the system (either |
| # 32-bit or 64-bit), the following line should be deleted |
| BOARD_QTI_CAMERA_32BIT_ONLY := true |
| |
| # Wifi related defines |
| BOARD_WPA_SUPPLICANT_DRIVER := NL80211 |
| WPA_SUPPLICANT_VERSION := VER_0_8_X |
| BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd |
| BOARD_HOSTAPD_DRIVER := NL80211 |
| BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd |
| BOARD_WLAN_DEVICE := bcmdhd |
| WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" |
| WIFI_DRIVER_FW_PATH_STA := "/vendor/firmware/fw_bcmdhd.bin" |
| WIFI_DRIVER_FW_PATH_AP := "/vendor/firmware/fw_bcmdhd_apsta.bin" |
| |
| #GPS |
| BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := $(TARGET_BOARD_PLATFORM) |
| BOARD_VENDOR_QCOM_LOC_PDK_FEATURE_SET := true |
| |
| #NFC |
| NXP_CHIP_TYPE := 2 |
| |
| # Testing related defines |
| BOARD_PERFSETUP_SCRIPT := platform_testing/scripts/perf-setup/angler-setup.sh |
| |
| TARGET_FS_CONFIG_GEN += device/huawei/angler/config.fs |
| |
| DEVICE_MANIFEST_FILE := device/huawei/angler/manifest.xml |
| DEVICE_MATRIX_FILE := device/huawei/angler/compatibility_matrix.xml |
| |
| -include vendor/huawei/angler/BoardConfigVendor.mk |
