| <?xml version="1.0" encoding="ISO-8859-1"?> |
| <!--- Copyright (c) 2013-2019, The Linux Foundation. All rights reserved. --> |
| <!--- --> |
| <!--- Redistribution and use in source and binary forms, with or without --> |
| <!--- modification, are permitted provided that the following conditions are --> |
| <!--- met: --> |
| <!--- * Redistributions of source code must retain the above copyright --> |
| <!--- notice, this list of conditions and the following disclaimer. --> |
| <!--- * Redistributions in binary form must reproduce the above --> |
| <!--- copyright notice, this list of conditions and the following --> |
| <!--- disclaimer in the documentation and/or other materials provided --> |
| <!--- with the distribution. --> |
| <!--- * Neither the name of The Linux Foundation nor the names of its --> |
| <!--- contributors may be used to endorse or promote products derived --> |
| <!--- from this software without specific prior written permission. --> |
| <!--- --> |
| <!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED --> |
| <!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF --> |
| <!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT --> |
| <!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS --> |
| <!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR --> |
| <!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF --> |
| <!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR --> |
| <!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, --> |
| <!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE --> |
| <!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN --> |
| <!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. --> |
| <sound_trigger_platform_info> |
| <param version="0x0105" /> <!-- this must be the first param --> |
| <!--- Version History: --> |
| <!--- 0x0101: Legacy version. --> |
| <!--- 0x0102: Includes acdb_ids param with the gcs_usecase tag. This matches --> |
| <!--- the gcs_usecase with the acdb device that uses it. --> |
| <!--- 0x0103: app_type and in_channels added to <lsm usecase> and out_channels --> |
| <!--- added to <adm_config> --> |
| <!--- 0x0104: instance id support for both WDSP<CPE> and ADSP lsm usecases --> |
| <!--- 0x0105: Select <lsm_usecase> based on capture device --> |
| |
| <common_config> |
| <param max_ape_sessions="8" /> |
| <param enable_failure_detection="false" /> |
| <param support_device_switch="false" /> |
| <param transit_to_non_lpi_on_battery_charging="false" /> |
| <param concurrent_capture="true" /> |
| <param transit_to_adsp_on_playback="true" /> |
| <!-- Below backend params must match with port used in mixer path file --> |
| <!-- param used to configure backend sample rate, format and channels --> |
| <param backend_port_name="TERT_TDM_TX_0" /> |
| <!-- Param used to match and obtain device backend index --> |
| <param backend_dai_name="TERT_TDM_TX_0" /> |
| </common_config> |
| <acdb_ids> |
| <param DEVICE_HANDSET_MIC_APE="100" /> |
| <param DEVICE_HANDSET_MIC_PP_APE="135" /> |
| <param DEVICE_HANDSET_DMIC_APE="149" /> |
| <param DEVICE_HANDSET_DMIC_LPI_APE="179" /> |
| <param DEVICE_HANDSET_TMIC_APE="157" /> |
| <param DEVICE_HANDSET_TMIC_LPI_APE="180" /> |
| <param DEVICE_HANDSET_QMIC_APE="137" /> |
| <param DEVICE_HANDSET_QMIC_LPI_APE="181" /> |
| <param DEVICE_HEADSET_MIC_APE="141" /> |
| <param DEVICE_HEADSET_MIC_APE_LPI="182" /> |
| </acdb_ids> |
| |
| <!-- Multiple sound_model_config tags can be listed, each with unique --> |
| <!-- vendor_uuid. The below tag represents QTI SVA engine sound model --> |
| <!-- configuration. ISV must use their own unique vendor_uuid. --> |
| |
| <!-- QTI SVA --> |
| <sound_model_config> |
| <param vendor_uuid="68ab2d40-e860-11e3-95ef-0002a5d5c51b" /> |
| <param execution_type="ADSP" /> |
| <param library="libsmwrapper.so" /> |
| <param max_ape_phrases="20" /> |
| <param max_ape_users="10" /> |
| <!-- Profile specific data which the algorithm can support --> |
| <param sample_rate="16000" /> |
| <param bit_width="16" /> |
| <param out_channels="1"/> <!-- Module output channels --> |
| |
| <arm_ss_usecase> |
| <!-- Options are "KEYWORD_DETECTION", "USER_VERIFICATION", "CUSTOM_DETECTION" --> |
| <param sm_detection_type= "KEYWORD_DETECTION" /> |
| <param sm_id="0x2" /> |
| <param module_lib="libcapiv2svacnn.so"/> |
| <param sample_rate="16000"/> |
| <param bit_wdith="16"/> |
| <param channel_count="1"/> |
| </arm_ss_usecase> |
| <arm_ss_usecase> |
| <param sm_detection_type= "USER_VERIFICATION" /> |
| <param sm_id="0x4" /> |
| <param module_lib="libcapiv2vop.so"/> |
| <param sample_rate="16000"/> |
| <param bit_wdith="16"/> |
| <param channel_count="1"/> |
| </arm_ss_usecase> |
| <!-- Module and param ids with which the algorithm is integrated |
| in non-graphite firmware (note these must come after gcs params) |
| Extends flexibility to have different ids based on execution type. |
| valid execution_type values: "WDSP" "ADSP" --> |
| <lsm_usecase> |
| <param capture_device="HANDSET" /> |
| <!-- adm_cfg_profile should match with the one defined under adm_config --> |
| <!-- Set it to NONE if LSM directly connects to AFE --> |
| <param adm_cfg_profile="FFECNS" /> |
| <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC" --> |
| <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile --> |
| <!-- is FFECNS --> |
| <param fluence_type="FLUENCE_TMIC" /> |
| <param execution_mode="ADSP" /> |
| <param app_type="2" /> <!-- app type used in ACDB --> |
| <param in_channels="5"/> <!-- Module input channels --> |
| <param in_channels_lpi="3"/> |
| <param load_sound_model_ids="0x00012C1C, 0x0, 0x00012C14" /> |
| <param unload_sound_model_ids="0x00012C1C, 0x0, 0x00012C15" /> |
| <param confidence_levels_ids="0x00012C1C, 0x0, 0x00012C07" /> |
| <param operation_mode_ids="0x00012C1C, 0x0, 0x00012C02" /> |
| <param polling_enable_ids="0x00012C1C, 0x0, 0x00012C1B" /> |
| <param custom_config_ids="0x00012C1C, 0x0, 0x00012C20" /> |
| <param det_event_type_ids="0x00012C1C, 0x0, 0x00012C2C" /> |
| </lsm_usecase> |
| <lsm_usecase> |
| <param capture_device="HEADSET" /> |
| <param adm_cfg_profile="FFECNS" /> |
| <param fluence_type="FLUENCE_MIC" /> |
| <param execution_mode="ADSP" /> |
| <param app_type="2" /> <!-- app type used in ACDB --> |
| <param in_channels="1"/> <!-- Module input channels --> |
| <param load_sound_model_ids="0x00012C1C, 0x0, 0x00012C14" /> |
| <param unload_sound_model_ids="0x00012C1C, 0x0, 0x00012C15" /> |
| <param confidence_levels_ids="0x00012C1C, 0x0, 0x00012C07" /> |
| <param operation_mode_ids="0x00012C1C, 0x0, 0x00012C02" /> |
| <param polling_enable_ids="0x00012C1C, 0x0, 0x00012C1B" /> |
| <param custom_config_ids="0x00012C1C, 0x0, 0x00012C20" /> |
| <param det_event_type_ids="0x00012C1C, 0x0, 0x00012C2C" /> |
| </lsm_usecase> |
| |
| <!-- format: "ADPCM_packet" or "PCM_packet" !--> |
| <!-- transfer_mode: "FTRT" or "RT" --> |
| <!-- kw_duration is in milli seconds. It is valid only for FTRT |
| transfer mode --> |
| <param capture_keyword="PCM_packet, RT, 2000" /> |
| <param client_capture_read_delay="2000" /> |
| </sound_model_config> |
| |
| <!-- QTI Music Detection !--> |
| <sound_model_config> |
| <param vendor_uuid="876c1b46-9d4d-40cc-a4fd-4d5ec7a80e47" /> |
| <param execution_type="ADSP" /> |
| <param library="libsmwrapper.so" /> |
| <param max_ape_phrases="1" /> |
| <param max_ape_users="1" /> |
| <!-- Profile specific data which the algorithm can support --> |
| <param sample_rate="16000" /> |
| <param bit_width="16" /> |
| <param out_channels="1"/> <!-- Module output channels --> |
| <!-- Module and param ids with which the algorithm is integrated |
| in non-graphite firmware (note these must come after gcs params) |
| Extends flexibility to have different ids based on execution type. |
| valid execution_type values: only "ADSP" --> |
| <lsm_usecase> |
| <param capture_device="HANDSET" /> |
| <!-- adm_cfg_profile should match with the one defined under adm_config --> |
| <!-- Set it to NONE if LSM directly connects to AFE --> |
| <param adm_cfg_profile="NONE" /> |
| <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC" --> |
| <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile --> |
| <!-- is FFECNS --> |
| <param fluence_type="NONE" /> |
| <param execution_mode="ADSP" /> |
| <param app_type="4" /> <!-- app type for MD used in ACDB --> |
| <param in_channels="1"/> <!-- Module input channels --> |
| <param load_sound_model_ids="0x00012C22, 0x0, 0x00012C14" /> |
| <param unload_sound_model_ids="0x00012C22, 0x0, 0x00012C15" /> |
| <param confidence_levels_ids="0x00012C22, 0x0, 0x00012C07" /> |
| <param det_event_type_ids="0x00012C22, 0x0, 0x00012C2C" /> |
| <param custom_config_ids="0x00012C22, 0x0, 0x00012C30" /> |
| </lsm_usecase> |
| <lsm_usecase> |
| <param capture_device="HEADSET" /> |
| <param adm_cfg_profile="NONE" /> |
| <param fluence_type="NONE" /> |
| <param execution_mode="ADSP" /> |
| <param app_type="4" /> <!-- app type for MD used in ACDB --> |
| <param in_channels="1"/> <!-- Module input channels --> |
| <param load_sound_model_ids="0x00012C22, 0x0, 0x00012C14" /> |
| <param unload_sound_model_ids="0x00012C22, 0x0, 0x00012C15" /> |
| <param confidence_levels_ids="0x00012C22, 0x0, 0x00012C07" /> |
| <param det_event_type_ids="0x00012C22, 0x0, 0x00012C2C" /> |
| <param custom_config_ids="0x00012C22, 0x0, 0x00012C30" /> |
| </lsm_usecase> |
| |
| <!-- format: "ADPCM_packet" or "PCM_packet" !--> |
| <!-- transfer_mode: "FTRT" or "RT" --> |
| <!-- kw_duration is in milli seconds. It is valid only for FTRT |
| transfer mode --> |
| <param capture_keyword="PCM_packet, FTRT, 1500" /> |
| <param client_capture_read_delay="2000" /> |
| </sound_model_config> |
| |
| <!-- Google Hotword --> |
| <sound_model_config> |
| <param vendor_uuid="7038ddc8-30f2-11e6-b0ac-40a8f03d3f15" /> |
| <param execution_type="ADSP" /> |
| <param library="none" /> |
| <param max_ape_phrases="1" /> |
| <param max_ape_users="1" /> |
| <!-- Profile specific data which the algorithm can support --> |
| <param sample_rate="16000" /> |
| <param bit_width="16" /> |
| <param out_channels="1"/> <!-- Module output channels --> |
| <lsm_usecase> |
| <param capture_device="HANDSET" /> |
| <!-- adm_cfg_profile should match with the one defined under adm_config --> |
| <!-- Set it to NONE if LSM directly connects to AFE --> |
| <param adm_cfg_profile="FLUENCE" /> |
| <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC" --> |
| <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile --> |
| <!-- is FFECNS --> |
| <param fluence_type="FLUENCE_DMIC" /> |
| <param execution_mode="ADSP" /> |
| <param app_type="3" /> <!-- app type used in ACDB --> |
| <param in_channels="2"/> <!-- Module input channels --> |
| <param load_sound_model_ids="0x18000001, 0x0, 0x00012C14" /> |
| <param unload_sound_model_ids="0x18000001, 0x0, 0x00012C15" /> |
| <param confidence_levels_ids="0x18000001, 0x0, 0x00012C07" /> |
| <param operation_mode_ids="0x18000001, 0x0, 0x00012C02" /> |
| <param polling_enable_ids="0x18000001, 0x0, 0x00012C1B" /> |
| <param custom_config_ids="0x18000001, 0x0, 0x00012C20" /> |
| </lsm_usecase> |
| <lsm_usecase> |
| <param capture_device="HEADSET" /> |
| <param adm_cfg_profile="NONE" /> |
| <param fluence_type="NONE" /> |
| <param execution_mode="ADSP" /> |
| <param app_type="3" /> <!-- app type used in ACDB --> |
| <param in_channels="1"/> <!-- Module input channels --> |
| <param load_sound_model_ids="0x18000001, 0x0, 0x00012C14" /> |
| <param unload_sound_model_ids="0x18000001, 0x0, 0x00012C15" /> |
| <param confidence_levels_ids="0x18000001, 0x0, 0x00012C07" /> |
| <param operation_mode_ids="0x18000001, 0x0, 0x00012C02" /> |
| <param polling_enable_ids="0x18000001, 0x0, 0x00012C1B" /> |
| <param custom_config_ids="0x18000001, 0x0, 0x00012C20" /> |
| </lsm_usecase> |
| |
| <!-- format: "ADPCM_packet" or "PCM_packet" !--> |
| <!-- transfer_mode: "FTRT" or "RT" --> |
| <!-- kw_duration is in milli seconds. It is valid only for FTRT |
| transfer mode --> |
| <param capture_keyword="PCM_raw, FTRT, 2000" /> |
| <param client_capture_read_delay="2000" /> |
| </sound_model_config> |
| |
| <!-- Google Music Detection --> |
| <sound_model_config> |
| <param vendor_uuid="9f6ad62a-1f0b-11e7-87c5-40a8f03d3f15" /> |
| <param execution_type="ADSP" /> |
| <param library="none" /> |
| <param max_ape_phrases="1" /> |
| <param max_ape_users="1" /> |
| <!-- Profile specific data which the algorithm can support --> |
| <param sample_rate="16000" /> |
| <param bit_width="16" /> |
| <param out_channels="1"/> <!-- Module output channels --> |
| <lsm_usecase> |
| <param capture_device="HANDSET" /> |
| <!-- adm_cfg_profile should match with the one defined under adm_config --> |
| <!-- Set it to NONE if LSM directly connects to AFE --> |
| <param adm_cfg_profile="FLUENCE" /> |
| <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC" --> |
| <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile --> |
| <!-- is FFECNS --> |
| <param fluence_type="FLUENCE_DMIC" /> |
| <param execution_mode="ADSP" /> |
| <param app_type="4" /> <!-- app type used in ACDB --> |
| <param in_channels="2"/> <!-- Module input channels --> |
| <param load_sound_model_ids="0x18100000, 0x0, 0x00012C14" /> |
| <param unload_sound_model_ids="0x18100000, 0x0, 0x00012C15" /> |
| <param confidence_levels_ids="0x18100000, 0x0, 0x00012C07" /> |
| <param operation_mode_ids="0x18100000, 0x0, 0x00012C02" /> |
| <param polling_enable_ids="0x18100000, 0x0, 0x00012C1B" /> |
| <param custom_config_ids="0x18100000, 0x0, 0x00012C20" /> |
| </lsm_usecase> |
| <lsm_usecase> |
| <param capture_device="HEADSET" /> |
| <param adm_cfg_profile="NONE" /> |
| <param fluence_type="NONE" /> |
| <param execution_mode="ADSP" /> |
| <param app_type="3" /> <!-- app type used in ACDB --> |
| <param in_channels="2"/> <!-- Module input channels --> |
| <param load_sound_model_ids="0x18100000, 0x0, 0x00012C14" /> |
| <param unload_sound_model_ids="0x18100000, 0x0, 0x00012C15" /> |
| <param confidence_levels_ids="0x18100000, 0x0, 0x00012C07" /> |
| <param operation_mode_ids="0x18100000, 0x0, 0x00012C02" /> |
| <param polling_enable_ids="0x18100000, 0x0, 0x00012C1B" /> |
| <param custom_config_ids="0x18100000, 0x0, 0x00012C20" /> |
| </lsm_usecase> |
| |
| <!-- format: "ADPCM_packet" or "PCM_packet" !--> |
| <!-- transfer_mode: "FTRT" or "RT" --> |
| <!-- kw_duration is in milli seconds. It is valid only for FTRT |
| transfer mode --> |
| <param capture_keyword="PCM_raw, FTRT, 5000" /> |
| <param client_capture_read_delay="2000" /> |
| </sound_model_config> |
| |
| <!-- Multiple adm_config tags can be listed, each with unique profile name. --> |
| <!-- app_type to match corresponding value from ACDB --> |
| <adm_config> |
| <param adm_cfg_profile="FFECNS" /> |
| <param app_type="69947" /> |
| <param sample_rate="16000" /> |
| <param bit_width="16" /> |
| <param out_channels="5"/> |
| </adm_config> |
| |
| <adm_config> |
| <param adm_cfg_profile="FLUENCE" /> |
| <param app_type="69944" /> |
| <param sample_rate="16000" /> |
| <param bit_width="16" /> |
| </adm_config> |
| </sound_trigger_platform_info> |