| # | |
| # Copyright (C) 2019 The Android Open-Source Project | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # | |
| LOCAL_PATH := device/google/sunfish | |
| PRODUCT_VENDOR_MOVE_ENABLED := true | |
| PRODUCT_SOONG_NAMESPACES += \ | |
| device/google/sunfish \ | |
| hardware/google/av \ | |
| hardware/google/interfaces \ | |
| hardware/google/pixel \ | |
| hardware/qcom/sm7150 \ | |
| hardware/qcom/sm7150/display \ | |
| vendor/google/camera \ | |
| vendor/qcom/sm7150 \ | |
| vendor/google/interfaces | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| keyguard.no_require_sim=true | |
| # enable cal by default on accel sensor | |
| PRODUCT_PRODUCT_PROPERTIES += \ | |
| persist.debug.sensors.accel_cal=1 | |
| # The default value of this variable is false and should only be set to true when | |
| # the device allows users to retain eSIM profiles after factory reset of user data. | |
| PRODUCT_PRODUCT_PROPERTIES += \ | |
| masterclear.allow_retain_esim_profiles_after_fdr=true | |
| PRODUCT_COPY_FILES += \ | |
| device/google/sunfish/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \ | |
| frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \ | |
| frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/permissions/android.software.verified_boot.xml | |
| PRODUCT_PACKAGES += \ | |
| messaging | |
| TARGET_PRODUCT_PROP := $(LOCAL_PATH)/product.prop | |
| $(call inherit-product, $(LOCAL_PATH)/utils.mk) | |
| # Installs gsi keys into ramdisk, to boot a GSI with verified boot. | |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/gsi_keys.mk) | |
| ifeq ($(wildcard vendor/google_devices/sunfish/proprietary/device-vendor-sunfish.mk),) | |
| BUILD_WITHOUT_VENDOR := true | |
| endif | |
| ifeq ($(TARGET_PREBUILT_KERNEL),) | |
| LOCAL_KERNEL := device/google/sunfish-kernel/Image.lz4 | |
| else | |
| LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL) | |
| endif | |
| PRODUCT_VENDOR_KERNEL_HEADERS := device/google/sunfish-kernel/sm7150/kernel-headers | |
| PRODUCT_CHARACTERISTICS := nosdcard | |
| PRODUCT_SHIPPING_API_LEVEL := 28 | |
| DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_KERNEL):kernel \ | |
| $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_RECOVERY)/root/first_stage_ramdisk/fstab.$(PRODUCT_PLATFORM) \ | |
| $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.$(PRODUCT_PLATFORM) \ | |
| $(LOCAL_PATH)/fstab.persist:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.persist \ | |
| $(LOCAL_PATH)/init.hardware.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).rc \ | |
| $(LOCAL_PATH)/init.power.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).power.rc \ | |
| $(LOCAL_PATH)/init.radio.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.radio.sh \ | |
| $(LOCAL_PATH)/uinput-fpc.kl:$(TARGET_COPY_OUT_VENDOR)/usr/keylayout/uinput-fpc.kl \ | |
| $(LOCAL_PATH)/uinput-fpc.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/uinput-fpc.idc \ | |
| $(LOCAL_PATH)/init.hardware.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).usb.rc \ | |
| $(LOCAL_PATH)/init.insmod.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.insmod.sh \ | |
| $(LOCAL_PATH)/init.qcom.wlan.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qcom.wlan.sh \ | |
| $(LOCAL_PATH)/init.sensors.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.sensors.sh \ | |
| $(LOCAL_PATH)/sensors.hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf \ | |
| $(LOCAL_PATH)/thermal-engine-$(PRODUCT_HARDWARE).conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine-$(PRODUCT_HARDWARE).conf \ | |
| $(LOCAL_PATH)/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc \ | |
| MSM_VIDC_TARGET_LIST := sm6150 # Get the color format from kernel headers | |
| MASTER_SIDE_CP_TARGET_LIST := sm6150 # ION specific settings | |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.hardware.diag.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.hardware.mpssrfs.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.hardware.chamber.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).chamber.rc | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.hardware.ipa.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).ipa.rc | |
| else | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.hardware.diag.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.hardware.mpssrfs.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc | |
| endif | |
| # A/B support | |
| PRODUCT_PACKAGES += \ | |
| otapreopt_script \ | |
| cppreopts.sh \ | |
| update_engine \ | |
| update_verifier | |
| # Use Sdcardfs | |
| PRODUCT_PRODUCT_PROPERTIES += \ | |
| ro.sys.sdcardfs=1 | |
| PRODUCT_PACKAGES += \ | |
| bootctrl.sm6150 \ | |
| bootctrl.sm6150.recovery | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.cp_system_other_odex=1 | |
| AB_OTA_POSTINSTALL_CONFIG += \ | |
| RUN_POSTINSTALL_system=true \ | |
| POSTINSTALL_PATH_system=system/bin/otapreopt_script \ | |
| FILESYSTEM_TYPE_system=ext4 \ | |
| POSTINSTALL_OPTIONAL_system=true | |
| PRODUCT_PACKAGES += \ | |
| update_engine_sideload \ | |
| sg_write_buffer \ | |
| f2fs_io \ | |
| check_f2fs | |
| AB_OTA_POSTINSTALL_CONFIG += \ | |
| RUN_POSTINSTALL_vendor=true \ | |
| POSTINSTALL_PATH_vendor=bin/checkpoint_gc \ | |
| FILESYSTEM_TYPE_vendor=ext4 \ | |
| POSTINSTALL_OPTIONAL_vendor=true | |
| # Userdata Checkpointing OTA GC | |
| PRODUCT_PACKAGES += \ | |
| checkpoint_gc | |
| # The following modules are included in debuggable builds only. | |
| PRODUCT_PACKAGES_DEBUG += \ | |
| bootctl \ | |
| r.vendor \ | |
| update_engine_client | |
| PRODUCT_COPY_FILES += \ | |
| frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \ | |
| frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \ | |
| frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\ | |
| frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\ | |
| frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \ | |
| frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \ | |
| frameworks/native/data/etc/android.hardware.biometrics.face.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.biometrics.face.xml\ | |
| frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.assist.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.assist.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml \ | |
| frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml \ | |
| frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \ | |
| frameworks/native/data/etc/android.hardware.telephony.gsm.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.gsm.xml \ | |
| frameworks/native/data/etc/android.hardware.telephony.cdma.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.cdma.xml \ | |
| frameworks/native/data/etc/android.hardware.telephony.ims.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.ims.xml \ | |
| frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ | |
| frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \ | |
| frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \ | |
| frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \ | |
| frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \ | |
| frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \ | |
| frameworks/native/data/etc/android.software.sip.voip.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.sip.voip.xml \ | |
| frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \ | |
| frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \ | |
| frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \ | |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ | |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ | |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ | |
| frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \ | |
| frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \ | |
| frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \ | |
| frameworks/native/data/etc/android.hardware.telephony.carrierlock.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.carrierlock.xml \ | |
| frameworks/native/data/etc/android.hardware.strongbox_keystore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.strongbox_keystore.xml \ | |
| frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \ | |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml | |
| # Audio fluence, ns, aec property, voice and media volume steps | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.vendor.audio.sdk.fluencetype=fluencepro \ | |
| persist.audio.fluence.voicecall=true \ | |
| persist.audio.fluence.speaker=true \ | |
| persist.audio.fluence.voicecomm=true \ | |
| persist.audio.fluence.voicerec=false \ | |
| ro.config.vc_call_vol_steps=7 \ | |
| ro.config.media_vol_steps=25 \ | |
| # Audio Features | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| vendor.audio.feature.external_dsp.enable=true \ | |
| vendor.audio.feature.external_speaker.enable=true \ | |
| vendor.audio.feature.concurrent_capture.enable=false \ | |
| vendor.audio.feature.a2dp_offload.enable=true \ | |
| vendor.audio.feature.hfp.enable=true \ | |
| vendor.audio.feature.hwdep_cal.enable=true \ | |
| vendor.audio.feature.incall_music.enable=true \ | |
| vendor.audio.feature.maxx_audio.enable=true \ | |
| vendor.audio.feature.spkr_prot.enable=true \ | |
| vendor.audio.feature.usb_offload.enable=true \ | |
| vendor.audio.feature.audiozoom.enable=true \ | |
| vendor.audio.feature.snd_mon.enable=true \ | |
| # MaxxAudio effect and add rotation monitor | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.audio.monitorRotation=true | |
| # Iaxxx streming and factory binary | |
| PRODUCT_PACKAGES += \ | |
| libtunnel \ | |
| libodsp \ | |
| adnc_strm.primary.default | |
| # graphics | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.opengles.version=196610 | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.vendor.display.foss=1 \ | |
| ro.vendor.display.paneltype=2 \ | |
| ro.vendor.display.sensortype=2 \ | |
| vendor.display.foss.config=1 \ | |
| vendor.display.foss.config_path=/vendor/etc/FOSSConfig.xml | |
| # camera hal buffer management | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.camera.managebuffer.enable=1 | |
| # Lets the vendor library that Google Camera HWL is enabled | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.camera.google_hwl.enabled=true \ | |
| persist.camera.google_hwl.name=libgooglecamerahwl_impl.so | |
| # OEM Unlock reporting | |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ | |
| ro.oem_unlock_supported=1 | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.vendor.cne.feature=1 \ | |
| persist.vendor.data.iwlan.enable=true \ | |
| persist.radio.RATE_ADAPT_ENABLE=1 \ | |
| persist.radio.ROTATION_ENABLE=1 \ | |
| persist.radio.VT_ENABLE=1 \ | |
| persist.radio.VT_HYBRID_ENABLE=1 \ | |
| persist.vendor.radio.apm_sim_not_pwdn=1 \ | |
| persist.vendor.radio.custom_ecc=1 \ | |
| persist.vendor.radio.data_ltd_sys_ind=1 \ | |
| persist.radio.videopause.mode=1 \ | |
| persist.vendor.radio.multisim_switch_support=true \ | |
| persist.vendor.radio.sib16_support=1 \ | |
| persist.vendor.radio.data_con_rprt=true \ | |
| persist.vendor.radio.relay_oprt_change=1 \ | |
| persist.vendor.radio.no_wait_for_card=1 \ | |
| persist.vendor.radio.sap_silent_pin=1 \ | |
| persist.rcs.supported=1 \ | |
| vendor.rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so \ | |
| ro.hardware.keystore_desede=true \ | |
| # Disable snapshot timer | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.vendor.radio.snapshot_enabled=0 \ | |
| persist.vendor.radio.snapshot_timer=0 | |
| PRODUCT_PACKAGES += \ | |
| hwcomposer.sm6150 \ | |
| android.hardware.graphics.composer@2.3-service-sm7150 \ | |
| gralloc.sm6150 \ | |
| android.hardware.graphics.mapper@3.0-impl-qti-display \ | |
| vendor.qti.hardware.display.allocator-service | |
| # RenderScript HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.renderscript@1.0-impl | |
| # Light HAL | |
| PRODUCT_PACKAGES += \ | |
| lights.sm6150 \ | |
| hardware.google.light@1.0-service | |
| # Memtrack HAL | |
| PRODUCT_PACKAGES += \ | |
| memtrack.sm6150 \ | |
| android.hardware.memtrack@1.0-impl \ | |
| android.hardware.memtrack@1.0-service | |
| # Bluetooth HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.bluetooth@1.0-impl-qti \ | |
| android.hardware.bluetooth@1.0-service-qti | |
| #Bluetooth SAR HAL | |
| PRODUCT_PACKAGES += \ | |
| vendor.qti.hardware.bluetooth_sar@1.0-impl | |
| # Bluetooth SoC | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| vendor.qcom.bluetooth.soc=cherokee | |
| # Property for loading BDA from device tree | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.vendor.bt.bdaddr_path=/proc/device-tree/chosen/cdt/cdb2/bt_addr | |
| # Bluetooth WiPower | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.vendor.bluetooth.emb_wp_mode=false \ | |
| ro.vendor.bluetooth.wipower=false | |
| # DRM HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.drm@1.0-impl \ | |
| android.hardware.drm@1.0-service \ | |
| android.hardware.drm@1.2-service.clearkey \ | |
| android.hardware.drm@1.2-service.widevine | |
| # NFC and Secure Element packages | |
| PRODUCT_PACKAGES += \ | |
| NfcNci \ | |
| Tag \ | |
| SecureElement \ | |
| android.hardware.nfc@1.2-service.st \ | |
| android.hardware.secure_element@1.0-service.st | |
| PRODUCT_COPY_FILES += \ | |
| device/google/sunfish/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ | |
| device/google/sunfish/nfc/libese-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-hal-st.conf \ | |
| device/google/sunfish/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.usb@1.2-service.sunfish | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.health@2.0-service.sunfish | |
| # Storage health HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.health.storage@1.0-service | |
| PRODUCT_PACKAGES += \ | |
| libmm-omxcore \ | |
| libOmxCore \ | |
| libstagefrighthw \ | |
| libOmxVdec \ | |
| libOmxVdecHevc \ | |
| libOmxVenc \ | |
| libc2dcolorconvert | |
| # Enable Codec 2.0 | |
| PRODUCT_PACKAGES += \ | |
| libqcodec2 \ | |
| vendor.qti.media.c2@1.0-service \ | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.camera.provider@2.4-impl-google \ | |
| android.hardware.camera.provider@2.4-service-google \ | |
| camera.sm6150 \ | |
| libgooglecamerahal \ | |
| libgooglecamerahwl_impl \ | |
| libgoogle_camera_hal_tests \ | |
| libqomx_core \ | |
| libmmjpeg_interface \ | |
| libmmcamera_interface \ | |
| libcameradepthcalibrator | |
| PRODUCT_PACKAGES += \ | |
| sensors.$(PRODUCT_HARDWARE) \ | |
| android.hardware.sensors@2.0-impl \ | |
| android.hardware.sensors@2.0-service \ | |
| android.hardware.sensors@2.0-service.rc | |
| PRODUCT_PACKAGES += \ | |
| fs_config_dirs \ | |
| fs_config_files | |
| # Context hub HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.contexthub@1.0-impl.generic \ | |
| android.hardware.contexthub@1.0-service | |
| # Boot control HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.boot@1.0-impl \ | |
| android.hardware.boot@1.0-impl.recovery \ | |
| android.hardware.boot@1.0-service \ | |
| # Vibrator HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.vibrator@1.3-service.sunfish \ | |
| # Thermal HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.thermal@2.0-service.pixel \ | |
| # Thermal HAL config | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/thermal_info_config_$(PRODUCT_HARDWARE).json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \ | |
| #GNSS HAL | |
| PRODUCT_PACKAGES += \ | |
| libgps.utils \ | |
| libgnss \ | |
| liblocation_api \ | |
| android.hardware.gnss@2.0-impl-qti \ | |
| android.hardware.gnss@2.0-service-qti | |
| # Wireless Charger HAL | |
| PRODUCT_PACKAGES += \ | |
| vendor.google.wireless_charger@1.0 | |
| ENABLE_VENDOR_RIL_SERVICE := true | |
| HOSTAPD := hostapd | |
| HOSTAPD += hostapd_cli | |
| PRODUCT_PACKAGES += $(HOSTAPD) | |
| WPA := wpa_supplicant.conf | |
| WPA += wpa_supplicant_wcn.conf | |
| WPA += wpa_supplicant | |
| PRODUCT_PACKAGES += $(WPA) | |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) | |
| PRODUCT_PACKAGES += wpa_cli | |
| endif | |
| # Wifi | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.wifi@1.0-service \ | |
| wificond \ | |
| libwpa_client | |
| # WLAN driver configuration files | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \ | |
| $(LOCAL_PATH)/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \ | |
| $(LOCAL_PATH)/wifi_concurrency_cfg.txt:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wifi_concurrency_cfg.txt \ | |
| $(LOCAL_PATH)/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini \ | |
| LIB_NL := libnl_2 | |
| PRODUCT_PACKAGES += $(LIB_NL) | |
| # Factory OTA | |
| PRODUCT_PACKAGES += \ | |
| FactoryOta | |
| # Audio effects | |
| PRODUCT_PACKAGES += \ | |
| libvolumelistener \ | |
| libqcomvisualizer \ | |
| libqcomvoiceprocessing \ | |
| libqcomvoiceprocessingdescriptors \ | |
| libqcompostprocbundle | |
| PRODUCT_PACKAGES += \ | |
| audio.primary.sm6150 \ | |
| audio.a2dp.default \ | |
| audio.usb.default \ | |
| audio.r_submix.default \ | |
| libaudio-resampler \ | |
| audio.hearing_aid.default \ | |
| audio.bluetooth.default | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.audio@5.0-impl:32 \ | |
| android.hardware.audio.effect@5.0-impl:32 \ | |
| android.hardware.broadcastradio@1.0-impl \ | |
| android.hardware.soundtrigger@2.2-impl \ | |
| android.hardware.bluetooth.audio@2.0-impl \ | |
| android.hardware.audio@2.0-service | |
| # Modules for Audio HAL | |
| PRODUCT_PACKAGES += \ | |
| libcirrusspkrprot \ | |
| libsndmonitor \ | |
| libmalistener \ | |
| liba2dpoffload \ | |
| btaudio_offload_if \ | |
| libmaxxaudio \ | |
| libaudiozoom | |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) | |
| PRODUCT_PACKAGES += \ | |
| tinyplay \ | |
| tinycap \ | |
| tinymix \ | |
| tinypcminfo \ | |
| cplay | |
| endif | |
| # Audio hal xmls | |
| # Audio Policy tables | |
| # Audio ACDB data | |
| # Audio ACDB workspace files for QACT | |
| # Audio speaker tunning config data | |
| # Audio audiozoom config data | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \ | |
| frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \ | |
| frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \ | |
| frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \ | |
| $(LOCAL_PATH)/media_profiles_V1_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml | |
| # Vendor seccomp policy files for media components: | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| audio.snd_card.open.retries=50 | |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) | |
| # Subsystem ramdump | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.vendor.sys.ssr.enable_ramdumps=1 | |
| endif | |
| # Subsystem silent restart | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.vendor.sys.ssr.restart_level=modem,SDXPRAIRIE,adsp,slpi | |
| # setup dalvik vm configs | |
| $(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk) | |
| # Use the default charger mode images | |
| PRODUCT_PACKAGES += \ | |
| charger_res_images | |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) | |
| # b/36703476: Set default log size to 1M | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.logd.size=1M | |
| # b/114766334: persist all logs by default rotating on 30 files of 1MiB | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| logd.logpersistd=logcatd \ | |
| logd.logpersistd.size=30 | |
| endif | |
| # Dumpstate HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.dumpstate@1.0-service.sunfish | |
| # Citadel | |
| PRODUCT_PACKAGES += \ | |
| citadeld \ | |
| citadel_updater \ | |
| android.hardware.authsecret@1.0-service.citadel \ | |
| android.hardware.oemlock@1.0-service.citadel \ | |
| android.hardware.weaver@1.0-service.citadel \ | |
| android.hardware.keymaster@4.0-service.citadel \ | |
| wait_for_strongbox | |
| # Citadel debug stuff | |
| PRODUCT_PACKAGES_DEBUG += \ | |
| test_citadel | |
| # Storage: for factory reset protection feature | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.frp.pst=/dev/block/bootdevice/by-name/frp | |
| PRODUCT_PACKAGES += \ | |
| vndk-sp | |
| PRODUCT_ENFORCE_RRO_TARGETS := * | |
| # Override heap growth limit due to high display density on device | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| dalvik.vm.heapgrowthlimit=256m | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:system_ext/lib/android.hidl.base@1.0.so \ | |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:system_ext/lib64/android.hidl.base@1.0.so \ | |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:vendor/lib/android.hidl.base@1.0.so \ | |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:vendor/lib64/android.hidl.base@1.0.so \ | |
| PRODUCT_PACKAGES += \ | |
| ipacm \ | |
| IPACM_cfg.xml | |
| #Set default CDMA subscription to RUIM | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.telephony.default_cdma_sub=0 | |
| # Set display color mode to Adaptive by default | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.sys.sf.color_saturation=1.0 \ | |
| persist.sys.sf.native_mode=2 \ | |
| persist.sys.sf.color_mode=9 | |
| # Keymaster configuration | |
| PRODUCT_COPY_FILES += \ | |
| frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml | |
| # Enable modem logging | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.radio.log_loc="/data/vendor/modem_dump" \ | |
| ro.radio.log_prefix="modem_log_" | |
| # Enable modem logging for debug | |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.vendor.sys.modem.diag.mdlog=true \ | |
| persist.vendor.sys.modem.diag.mdlog_br_num=5 | |
| else | |
| endif | |
| # Preopt SystemUI | |
| PRODUCT_DEXPREOPT_SPEED_APPS += \ | |
| SystemUIGoogle | |
| # Enable stats logging in LMKD | |
| TARGET_LMKD_STATS_LOG := true | |
| PRODUCT_PRODUCT_PROPERTIES += \ | |
| ro.lmk.log_stats=true | |
| # default usb oem functions | |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| persist.vendor.usb.usbradio.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl_gsi,rmnet_gsi | |
| endif | |
| # Early phase offset configuration for SurfaceFlinger (b/75985430) | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| debug.sf.early_phase_offset_ns=500000 | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| debug.sf.early_app_phase_offset_ns=500000 | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| debug.sf.early_gl_phase_offset_ns=3000000 | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| debug.sf.early_gl_app_phase_offset_ns=15000000 | |
| # Do not skip init trigger by default | |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ | |
| vendor.skip.init=0 | |
| BOARD_USES_QCNE := true | |
| #per device | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/sunfish/init.sunfish.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.sunfish.rc | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config | |
| # power HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.power@1.3-service.pixel-libperfmgr | |
| # Disable ro.adb.secure for the factory build to work around dead touchscreens | |
| # Bug: 116250643 | |
| PRODUCT_PRODUCT_PROPERTIES += \ | |
| ro.adb.secure=0 | |
| # GPS configuration file | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf | |
| # default atrace HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.atrace@1.0-service | |
| # Fingerprint | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.biometrics.fingerprint@2.1-service.fpc | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.fingerprint.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.fingerprint.sh | |
| PRODUCT_COPY_FILES += \ | |
| frameworks/native/data/etc/android.hardware.fingerprint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.fingerprint.xml | |
| # Reliability reporting | |
| PRODUCT_PACKAGES += \ | |
| pixelstats-vendor | |
| PRODUCT_USE_DYNAMIC_PARTITIONS := true | |
| # fastbootd | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.fastboot@1.0-impl.pixel \ | |
| fastbootd | |
| # insmod files | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.insmod.sunfish.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.sunfish.cfg | |
| # Use /product/etc/fstab.postinstall to mount system_other | |
| PRODUCT_PRODUCT_PROPERTIES += \ | |
| ro.postinstall.fstab.prefix=/product | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall | |
| # powerstats HAL | |
| PRODUCT_PACKAGES += \ | |
| android.hardware.power.stats@1.0-service.pixel | |
| # Recovery | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/init.recovery.device.rc:recovery/root/init.recovery.sunfish.rc | |
| # Do not skip init trigger by default | |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ | |
| vendor.skip.init=0 | |
| # Oslo feature flag | |
| PRODUCT_PRODUCT_PROPERTIES += \ | |
| ro.vendor.aware_available=true | |
| QTI_TELEPHONY_UTILS := qti-telephony-utils | |
| QTI_TELEPHONY_UTILS += qti_telephony_utils.xml | |
| PRODUCT_PACKAGES += $(QTI_TELEPHONY_UTILS) | |
| HIDL_WRAPPER := qti-telephony-hidl-wrapper | |
| HIDL_WRAPPER += qti_telephony_hidl_wrapper.xml | |
| PRODUCT_PACKAGES += $(HIDL_WRAPPER) | |
| # Increment the SVN for any official public releases | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.vendor.build.svn=1 | |
| # ZRAM writeback | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| ro.zram.mark_idle_delay_mins=60 \ | |
| ro.zram.first_wb_delay_mins=180 \ | |
| ro.zram.periodic_wb_delay_hours=24 | |
| # Disable SPU usage | |
| PRODUCT_PROPERTY_OVERRIDES += \ | |
| vendor.gatekeeper.disable_spu = true | |
| PRODUCT_COPY_FILES += \ | |
| $(LOCAL_PATH)/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json |