| # |
| # Copyright (C) 2021 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| TARGET_KERNEL_DIR ?= device/google/shusky-kernel |
| TARGET_BOARD_KERNEL_HEADERS := device/google/shusky-kernel/kernel-headers |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| USE_UWBFIELDTESTQM := true |
| endif |
| |
| $(call inherit-product-if-exists, vendor/google_devices/shusky/prebuilts/device-vendor-ripcurrent.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/zuma/prebuilts/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/zuma/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/ripcurrent/device-vendor-ripcurrent.mk) |
| $(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk) |
| |
| include device/google/shusky/audio/ripcurrent/audio-tables.mk |
| include device/google/zuma/device-shipping-common.mk |
| include hardware/google/pixel/vibrator/cs40l26/device-stereo.mk |
| include device/google/gs-common/bcmbt/bluetooth.mk |
| include device/google/gs-common/gps/brcm/cbd_gps.mk |
| include device/google/gs-common/touch/stm/stm20.mk |
| |
| # go/lyric-soong-variables |
| $(call soong_config_set,lyric,camera_hardware,ripcurrent) |
| $(call soong_config_set,lyric,tuning_product,ripcurrent) |
| $(call soong_config_set,google3a_config,target_device,ripcurrent) |
| |
| # display |
| DEVICE_PACKAGE_OVERLAYS += device/google/shusky/ripcurrent/overlay |
| |
| # Init files |
| PRODUCT_COPY_FILES += \ |
| device/google/shusky/conf/init.ripcurrent.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.ripcurrent.rc |
| |
| # Recovery files |
| PRODUCT_COPY_FILES += \ |
| device/google/shusky/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.ripcurrent.rc |
| |
| # Camera |
| PRODUCT_COPY_FILES += \ |
| device/google/shusky/media_profiles_ripcurrent.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml |
| |
| # NFC |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ |
| frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ |
| device/google/shusky/nfc/libnfc-hal-st-disable.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ |
| device/google/shusky/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-enable.conf \ |
| device/google/shusky/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf |
| |
| PRODUCT_PACKAGES += \ |
| NfcNci \ |
| Tag \ |
| android.hardware.nfc-service.st |
| |
| # SecureElement |
| PRODUCT_PACKAGES += \ |
| android.hardware.secure_element-service.thales |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \ |
| frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \ |
| device/google/shusky/nfc/libse-gto-hal-disable.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf |
| |
| |
| # Bluetooth HAL |
| PRODUCT_COPY_FILES += \ |
| device/google/shusky/bluetooth/bt_vendor_overlay_ripcurrent.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.bluetooth.a2dp_offload.supported=true \ |
| persist.bluetooth.a2dp_offload.disabled=false \ |
| persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus |
| |
| # Spatial Audio |
| PRODUCT_PACKAGES += \ |
| libspatialaudio |
| |
| # declare use of spatial audio |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.audio.spatializer_enabled=true |
| |
| # Bluetooth hci_inject test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| hci_inject |
| |
| # Bluetooth OPUS codec |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.opus.enabled=true |
| |
| # Bluetooth SAR test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| sar_test |
| |
| # Bluetooth EWP test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| ewp_tool |
| |
| # Bluetooth AAC VBR |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.a2dp_aac.vbr_supported=true |
| |
| # Override BQR mask to enable LE Audio Choppy report, remove BTRT logging |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.bqr.event_mask=295006 \ |
| persist.bluetooth.bqr.vnd_quality_mask=29 \ |
| persist.bluetooth.bqr.vnd_trace_mask=0 |
| else |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.bqr.event_mask=295006 \ |
| persist.bluetooth.bqr.vnd_quality_mask=16 \ |
| persist.bluetooth.bqr.vnd_trace_mask=0 |
| endif |
| |
| # default BDADDR for EVB only |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55" |
| |
| # Spatial Audio |
| PRODUCT_PACKAGES += \ |
| libspatialaudio \ |
| librondo |
| |
| # Bluetooth Super Wide Band |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.hfp.swb.supported=true |
| |
| # Bluetooth LE Audio |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.leaudio_switcher.supported=true \ |
| bluetooth.profile.bap.unicast.client.enabled=true \ |
| bluetooth.profile.csip.set_coordinator.enabled=true \ |
| bluetooth.profile.hap.client.enabled=true \ |
| bluetooth.profile.mcp.server.enabled=true \ |
| bluetooth.profile.ccp.server.enabled=true \ |
| bluetooth.profile.vcp.controller.enabled=true |
| |
| # Bluetooth LE Audio enable hardware offloading |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.leaudio_offload.supported=true \ |
| persist.bluetooth.leaudio_offload.disabled=false |
| |
| # Bluetooth LE Auido offload capabilities setting |
| PRODUCT_COPY_FILES += \ |
| device/google/shusky/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml |
| |
| # Keymaster HAL |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # Gatekeeper HAL |
| #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software |
| |
| |
| # Gatekeeper |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.gatekeeper@1.0-service.software |
| |
| # Keymint replaces Keymaster |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.security.keymint-service |
| |
| # Keymaster |
| #PRODUCT_PACKAGES += \ |
| # android.hardware.keymaster@4.0-impl \ |
| # android.hardware.keymaster@4.0-service |
| |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # PRODUCT_PROPERTY_OVERRIDES += \ |
| # ro.hardware.keystore_desede=true \ |
| # ro.hardware.keystore=software \ |
| # ro.hardware.gatekeeper=software |
| |
| # PowerStats HAL |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/shusky/powerstats/ripcurrent |
| |
| # WiFi Overlay |
| PRODUCT_PACKAGES += \ |
| WifiOverlay2023 |
| |
| # Trusty liboemcrypto.so |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/shusky/prebuilts |
| |
| # Location |
| PRODUCT_COPY_FILES += \ |
| device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \ |
| device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \ |
| device/google/shusky/location/gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| else |
| PRODUCT_COPY_FILES += \ |
| device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \ |
| device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \ |
| device/google/shusky/location/gps_user.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml |
| endif |
| |
| # Set zram size |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.zram.size=50p \ |
| persist.device_config.configuration.disable_rescue_party=true |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.udfps.als_feed_forward_supported=true \ |
| persist.vendor.udfps.lhbm_controlled_in_hal_supported=true |
| |
| # Camera Vendor property |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.front_720P_always_binning=true |
| |
| # Vibrator HAL |
| ACTUATOR_MODEL := luxshare_ict_081545 |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.vibrator.hal.chirp.enabled=0 \ |
| ro.vendor.vibrator.hal.device.mass=0.222 \ |
| ro.vendor.vibrator.hal.loc.coeff=2.8 |
| |
| # PKVM Memory Reclaim |
| PRODUCT_VENDOR_PROPERTIES += \ |
| hypervisor.memory_reclaim.supported=1 |
