| # |
| # Copyright (C) 2018 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| LOCAL_PATH := device/google/redfin |
| |
| PRODUCT_VENDOR_MOVE_ENABLED := true |
| |
| PRODUCT_SOONG_NAMESPACES += \ |
| hardware/google/av \ |
| hardware/google/interfaces \ |
| hardware/google/pixel \ |
| device/google/redfin \ |
| hardware/qcom/sm7250 \ |
| vendor/google/airbrush/floral \ |
| vendor/google/biometrics/face \ |
| vendor/google/darwinn \ |
| hardware/qcom/sm7250/display \ |
| vendor/google/camera \ |
| vendor/qcom/sm7250 \ |
| vendor/google/interfaces |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| keyguard.no_require_sim=true |
| |
| # enable cal by default on accel sensor |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.vendor.debug.sensors.accel_cal=1 |
| |
| # The default value of this variable is false and should only be set to true when |
| # the device allows users to retain eSIM profiles after factory reset of user data. |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| masterclear.allow_retain_esim_profiles_after_fdr=true |
| |
| PRODUCT_COPY_FILES += \ |
| device/google/redfin/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \ |
| frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \ |
| frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/permissions/android.software.verified_boot.xml |
| |
| PRODUCT_PACKAGES += \ |
| messaging |
| |
| TARGET_PRODUCT_PROP := $(LOCAL_PATH)/product.prop |
| |
| $(call inherit-product, $(LOCAL_PATH)/utils.mk) |
| |
| # Installs gsi keys into ramdisk, to boot a GSI with verified boot. |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/gsi_keys.mk) |
| |
| ifeq ($(wildcard vendor/google_devices/redfin/proprietary/device-vendor-redfin.mk),) |
| BUILD_WITHOUT_VENDOR := true |
| endif |
| |
| ifeq ($(TARGET_PREBUILT_KERNEL),) |
| LOCAL_KERNEL := device/google/redfin-kernel/Image.lz4 |
| else |
| LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL) |
| endif |
| PRODUCT_VENDOR_KERNEL_HEADERS := device/google/redfin-kernel/sm7250/kernel-headers |
| |
| |
| PRODUCT_CHARACTERISTICS := nosdcard |
| PRODUCT_SHIPPING_API_LEVEL := 28 |
| |
| DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay |
| |
| # |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_KERNEL):kernel \ |
| $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.$(PRODUCT_PLATFORM) \ |
| $(LOCAL_PATH)/fstab.persist:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.persist \ |
| $(LOCAL_PATH)/init.hardware.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).rc \ |
| $(LOCAL_PATH)/init.power.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).power.rc \ |
| $(LOCAL_PATH)/init.radio.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.radio.sh \ |
| $(LOCAL_PATH)/init.hardware.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).usb.rc \ |
| $(LOCAL_PATH)/init.insmod.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.insmod.sh \ |
| $(LOCAL_PATH)/init.qcom.wlan.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qcom.wlan.sh \ |
| $(LOCAL_PATH)/init.sensors.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.sensors.sh \ |
| $(LOCAL_PATH)/sensors.hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf \ |
| $(LOCAL_PATH)/thermal-engine-$(PRODUCT_HARDWARE).conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine-$(PRODUCT_HARDWARE).conf \ |
| $(LOCAL_PATH)/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc |
| |
| |
| MSM_VIDC_TARGET_LIST := lito # Get the color format from kernel headers |
| MASTER_SIDE_CP_TARGET_LIST := lito # ION specific settings |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.mpssrfs.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.diag.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.chamber.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).chamber.rc |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.ipa.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).ipa.rc |
| else |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.mpssrfs.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.diag.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc |
| endif |
| |
| # A/B support |
| PRODUCT_PACKAGES += \ |
| otapreopt_script \ |
| cppreopts.sh \ |
| update_engine \ |
| update_verifier |
| |
| # Use Sdcardfs |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.sys.sdcardfs=1 |
| |
| PRODUCT_PACKAGES += \ |
| bootctrl.lito |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.cp_system_other_odex=1 |
| |
| AB_OTA_POSTINSTALL_CONFIG += \ |
| RUN_POSTINSTALL_system=true \ |
| POSTINSTALL_PATH_system=system/bin/otapreopt_script \ |
| FILESYSTEM_TYPE_system=ext4 \ |
| POSTINSTALL_OPTIONAL_system=true |
| |
| # Enable update engine sideloading by including the static version of the |
| # boot_control HAL and its dependencies. |
| PRODUCT_STATIC_BOOT_CONTROL_HAL := \ |
| bootctrl.lito \ |
| libgptutils \ |
| libz \ |
| libcutils |
| |
| PRODUCT_PACKAGES += \ |
| update_engine_sideload \ |
| sg_write_buffer \ |
| f2fs_io \ |
| check_f2fs |
| |
| AB_OTA_POSTINSTALL_CONFIG += \ |
| RUN_POSTINSTALL_vendor=true \ |
| POSTINSTALL_PATH_vendor=bin/checkpoint_gc \ |
| FILESYSTEM_TYPE_vendor=ext4 \ |
| POSTINSTALL_OPTIONAL_vendor=true |
| |
| # Userdata Checkpointing OTA GC |
| PRODUCT_PACKAGES += \ |
| checkpoint_gc |
| |
| # The following modules are included in debuggable builds only. |
| PRODUCT_PACKAGES_DEBUG += \ |
| bootctl \ |
| r.vendor \ |
| update_engine_client |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \ |
| frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \ |
| frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\ |
| frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\ |
| frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \ |
| frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \ |
| frameworks/native/data/etc/android.hardware.biometrics.face.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.biometrics.face.xml\ |
| frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.assist.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.assist.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml \ |
| frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.gsm.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.gsm.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.cdma.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.cdma.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.ims.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.ims.xml \ |
| frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \ |
| frameworks/native/data/etc/android.software.sip.voip.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.sip.voip.xml \ |
| frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \ |
| frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \ |
| frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.carrierlock.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.carrierlock.xml \ |
| frameworks/native/data/etc/android.hardware.strongbox_keystore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.strongbox_keystore.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml |
| |
| # Audio fluence, ns, aec property, voice and media volume steps |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.qc.sdk.audio.fluencetype=fluencepro \ |
| persist.audio.fluence.voicecall=true \ |
| persist.audio.fluence.speaker=true \ |
| persist.audio.fluence.voicecomm=true \ |
| persist.audio.fluence.voicerec=false \ |
| ro.config.vc_call_vol_steps=7 \ |
| ro.config.media_vol_steps=25 \ |
| |
| # Audio Features |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.audio.feature.external_dsp.enable=true \ |
| vendor.audio.feature.external_speaker.enable=true \ |
| vendor.audio.feature.concurrent_capture.enable=false \ |
| vendor.audio.feature.a2dp_offload.enable=true \ |
| vendor.audio.feature.hfp.enable=true \ |
| vendor.audio.feature.hwdep_cal.enable=true \ |
| vendor.audio.feature.incall_music.enable=true \ |
| vendor.audio.feature.maxx_audio.enable=true \ |
| vendor.audio.feature.spkr_prot.enable=true \ |
| vendor.audio.feature.usb_offload.enable=true \ |
| vendor.audio.feature.audiozoom.enable=true \ |
| vendor.audio.feature.snd_mon.enable=true \ |
| |
| # MaxxAudio effect and add rotation monitor |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.audio.monitorRotation=true |
| |
| # Iaxxx streming and factory binary |
| PRODUCT_PACKAGES += \ |
| libtunnel \ |
| libodsp \ |
| adnc_strm.primary.default \ |
| sound_trigger.primary.lito |
| |
| # Add Oslo test for debug rom |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PACKAGES += \ |
| tunneling_hal_test \ |
| sensor_param_test \ |
| oslo_config_test \ |
| odsp_api_test \ |
| crash_event_logger \ |
| dump_debug_info \ |
| get_pwr_stats \ |
| crash_trigger_test |
| endif |
| |
| # graphics |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.opengles.version=196610 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.display.foss=1 \ |
| ro.vendor.display.paneltype=2 \ |
| ro.vendor.display.sensortype=2 \ |
| vendor.display.foss.config=1 \ |
| vendor.display.foss.config_path=/vendor/etc/FOSSConfig.xml |
| |
| # camera google face detection |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.googfd.enable=1 |
| |
| # camera disable FaceSSD temporarily |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.facessd.enable=0 |
| |
| # camera hal buffer management |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.managebuffer.enable=1 |
| |
| # Lets the vendor library that Google Camera HWL is enabled |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.google_hwl.enabled=true \ |
| persist.camera.google_hwl.name=libgooglecamerahwl_impl.so |
| |
| # OEM Unlock reporting |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ |
| ro.oem_unlock_supported=1 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.cne.feature=1 \ |
| persist.vendor.data.iwlan.enable=true \ |
| persist.radio.RATE_ADAPT_ENABLE=1 \ |
| persist.radio.ROTATION_ENABLE=1 \ |
| persist.radio.VT_ENABLE=1 \ |
| persist.radio.VT_HYBRID_ENABLE=1 \ |
| persist.vendor.radio.apm_sim_not_pwdn=1 \ |
| persist.vendor.radio.custom_ecc=1 \ |
| persist.vendor.radio.data_ltd_sys_ind=1 \ |
| persist.radio.videopause.mode=1 \ |
| persist.vendor.radio.multisim_switch_support=true \ |
| persist.vendor.radio.sib16_support=1 \ |
| persist.vendor.radio.data_con_rprt=true \ |
| persist.vendor.radio.relay_oprt_change=1 \ |
| persist.vendor.radio.no_wait_for_card=1 \ |
| persist.vendor.radio.sap_silent_pin=1 \ |
| persist.rcs.supported=1 \ |
| vendor.rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so \ |
| ro.hardware.keystore_desede=true \ |
| |
| # Disable snapshot timer |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.radio.snapshot_enabled=0 \ |
| persist.vendor.radio.snapshot_timer=0 |
| |
| # Enable USB debugging by default for bringup |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.sys.usb.config=adb |
| |
| PRODUCT_PACKAGES += \ |
| hwcomposer.lito \ |
| android.hardware.graphics.composer@2.3-service-sm7250 \ |
| gralloc.lito \ |
| android.hardware.graphics.mapper@3.0-impl-qti-display \ |
| vendor.qti.hardware.display.allocator-service |
| |
| # RenderScript HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.renderscript@1.0-impl |
| |
| # Light HAL |
| PRODUCT_PACKAGES += \ |
| lights.lito \ |
| hardware.google.light@1.0-service |
| |
| # Memtrack HAL |
| PRODUCT_PACKAGES += \ |
| memtrack.lito \ |
| android.hardware.memtrack@1.0-impl \ |
| android.hardware.memtrack@1.0-service |
| |
| # Bluetooth HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.bluetooth@1.0-impl-qti \ |
| android.hardware.bluetooth@1.0-service-qti |
| |
| #Bluetooth SAR HAL |
| PRODUCT_PACKAGES += \ |
| vendor.qti.hardware.bluetooth_sar@1.0-impl |
| |
| # Bluetooth SoC |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.qcom.bluetooth.soc=cherokee |
| |
| # Property for loading BDA from device tree |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.bt.bdaddr_path=/proc/device-tree/chosen/cdt/cdb2/bt_addr |
| |
| # Bluetooth WiPower |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.bluetooth.emb_wp_mode=false \ |
| ro.vendor.bluetooth.wipower=false |
| |
| # DRM HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.drm@1.0-impl \ |
| android.hardware.drm@1.0-service \ |
| android.hardware.drm@1.2-service.clearkey \ |
| android.hardware.drm@1.2-service.widevine |
| |
| # NFC and Secure Element packages |
| PRODUCT_PACKAGES += \ |
| NfcNci \ |
| Tag \ |
| SecureElement \ |
| android.hardware.nfc@1.2-service.st \ |
| android.hardware.secure_element@1.0-service.st |
| |
| PRODUCT_COPY_FILES += \ |
| device/google/redfin/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ |
| device/google/redfin/nfc/libese-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-hal-st.conf \ |
| device/google/redfin/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.usb@1.2-service.redfin |
| |
| # Storage health HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.health.storage@1.0-service |
| |
| PRODUCT_PACKAGES += \ |
| libmm-omxcore \ |
| libOmxCore \ |
| libstagefrighthw \ |
| libOmxVdec \ |
| libOmxVdecHevc \ |
| libOmxVenc \ |
| libc2dcolorconvert |
| |
| # Enable Codec 2.0 |
| PRODUCT_PACKAGES += \ |
| libqcodec2 \ |
| vendor.qti.media.c2@1.0-service \ |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.camera.provider@2.4-impl-google \ |
| android.hardware.camera.provider@2.4-service-google \ |
| camera.lito \ |
| libgooglecamerahal \ |
| libgooglecamerahwl_impl \ |
| libgoogle_camera_hal_tests \ |
| libqomx_core \ |
| libmmjpeg_interface \ |
| libmmcamera_interface \ |
| libcameradepthcalibrator |
| |
| PRODUCT_PACKAGES += \ |
| sensors.$(PRODUCT_HARDWARE) \ |
| android.hardware.sensors@2.0-impl \ |
| android.hardware.sensors@2.0-service \ |
| android.hardware.sensors@2.0-service.rc |
| |
| PRODUCT_PACKAGES += \ |
| fs_config_dirs \ |
| fs_config_files |
| |
| # Context hub HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.contexthub@1.0-impl.generic \ |
| android.hardware.contexthub@1.0-service |
| |
| # Boot control HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.boot@1.0-impl \ |
| android.hardware.boot@1.0-service \ |
| |
| # Vibrator HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.vibrator@1.3-service.redfin \ |
| |
| # Thermal HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.thermal@2.0-service.pixel \ |
| |
| # Thermal HAL config |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/thermal_info_config_$(PRODUCT_HARDWARE).json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \ |
| |
| #GNSS HAL |
| PRODUCT_PACKAGES += \ |
| libgps.utils \ |
| libgnss \ |
| liblocation_api \ |
| android.hardware.gnss@2.0-impl-qti \ |
| android.hardware.gnss@2.0-service-qti |
| |
| # Wireless Charger HAL |
| PRODUCT_PACKAGES += \ |
| vendor.google.wireless_charger@1.0 |
| |
| ENABLE_VENDOR_RIL_SERVICE := true |
| |
| HOSTAPD := hostapd |
| HOSTAPD += hostapd_cli |
| PRODUCT_PACKAGES += $(HOSTAPD) |
| |
| WPA := wpa_supplicant.conf |
| WPA += wpa_supplicant_wcn.conf |
| WPA += wpa_supplicant |
| PRODUCT_PACKAGES += $(WPA) |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PACKAGES += wpa_cli |
| endif |
| |
| # Wifi |
| PRODUCT_PACKAGES += \ |
| android.hardware.wifi@1.0-service \ |
| wificond \ |
| libwpa_client |
| |
| # WLAN driver configuration files |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \ |
| $(LOCAL_PATH)/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \ |
| $(LOCAL_PATH)/wifi_concurrency_cfg.txt:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wifi_concurrency_cfg.txt \ |
| $(LOCAL_PATH)/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini \ |
| |
| LIB_NL := libnl_2 |
| PRODUCT_PACKAGES += $(LIB_NL) |
| |
| # Factory OTA |
| PRODUCT_PACKAGES += \ |
| FactoryOta |
| |
| # Audio effects |
| PRODUCT_PACKAGES += \ |
| libvolumelistener \ |
| libqcomvisualizer \ |
| libqcomvoiceprocessing \ |
| libqcomvoiceprocessingdescriptors \ |
| libqcompostprocbundle |
| |
| PRODUCT_PACKAGES += \ |
| audio.primary.lito \ |
| audio.a2dp.default \ |
| audio.usb.default \ |
| audio.r_submix.default \ |
| libaudio-resampler \ |
| audio.hearing_aid.default \ |
| audio.bluetooth.default |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.audio@5.0-impl:32 \ |
| android.hardware.audio.effect@5.0-impl:32 \ |
| android.hardware.broadcastradio@1.0-impl \ |
| android.hardware.soundtrigger@2.2-impl \ |
| android.hardware.bluetooth.audio@2.0-impl \ |
| android.hardware.audio@2.0-service |
| |
| # Modules for Audio HAL |
| PRODUCT_PACKAGES += \ |
| libcirrusspkrprot \ |
| libsndmonitor \ |
| libmalistener \ |
| liba2dpoffload \ |
| btaudio_offload_if \ |
| libmaxxaudio \ |
| libaudiozoom |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PACKAGES += \ |
| tinyplay \ |
| tinycap \ |
| tinymix \ |
| tinypcminfo \ |
| cplay |
| endif |
| |
| # Audio hal xmls |
| |
| # Audio Policy tables |
| |
| # Audio ACDB data |
| |
| # Audio ACDB workspace files for QACT |
| |
| # Audio speaker tunning config data |
| |
| # Audio audiozoom config data |
| |
| # RT5514 SoundTrigger |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/audio/rt5514_dsp_fw1.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw1.bin \ |
| $(LOCAL_PATH)/audio/rt5514_dsp_fw2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw2.bin \ |
| $(LOCAL_PATH)/audio/rt5514_dsp_fw3.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw3.bin \ |
| $(LOCAL_PATH)/audio/rt5514_dsp_fw4.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw4.bin |
| |
| # and ensure that the xaac decoder is built |
| PRODUCT_PACKAGES += \ |
| libstagefright_soft_xaacdec.vendor |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \ |
| $(LOCAL_PATH)/media_profiles_V1_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml |
| |
| # Vendor seccomp policy files for media components: |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| audio.snd_card.open.retries=50 |
| |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| # Subsystem ramdump |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.sys.ssr.enable_ramdumps=1 |
| endif |
| |
| # Subsystem silent restart |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.sys.ssr.restart_level=modem,SDXPRAIRIE,adsp,slpi |
| |
| # setup dalvik vm configs |
| $(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk) |
| |
| # Use the default charger mode images |
| PRODUCT_PACKAGES += \ |
| charger_res_images |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| # b/36703476: Set default log size to 1M |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.logd.size=1M |
| # b/114766334: persist all logs by default rotating on 30 files of 1MiB |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| logd.logpersistd=logcatd \ |
| logd.logpersistd.size=30 |
| endif |
| |
| # Dumpstate HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.dumpstate@1.0-service.redfin |
| |
| # Citadel |
| #PRODUCT_PACKAGES += \ |
| citadeld \ |
| citadel_updater \ |
| android.hardware.authsecret@1.0-service.citadel \ |
| android.hardware.oemlock@1.0-service.citadel \ |
| android.hardware.weaver@1.0-service.citadel \ |
| android.hardware.keymaster@4.0-service.citadel \ |
| wait_for_strongbox |
| |
| # Citadel debug stuff |
| #PRODUCT_PACKAGES_DEBUG += \ |
| test_citadel |
| |
| # Storage: for factory reset protection feature |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.frp.pst=/dev/block/bootdevice/by-name/frp |
| |
| PRODUCT_PACKAGES += \ |
| vndk-sp |
| |
| PRODUCT_ENFORCE_RRO_TARGETS := * |
| |
| # Override heap growth limit due to high display density on device |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| dalvik.vm.heapgrowthlimit=256m |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:system/lib/android.hidl.base@1.0.so \ |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:system/lib64/android.hidl.base@1.0.so \ |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:vendor/lib/android.hidl.base@1.0.so \ |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:vendor/lib64/android.hidl.base@1.0.so \ |
| |
| PRODUCT_PACKAGES += \ |
| ipacm \ |
| IPACM_cfg.xml |
| |
| #Set default CDMA subscription to RUIM |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.telephony.default_cdma_sub=0 |
| |
| # Set display color mode to Adaptive by default |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.sys.sf.color_saturation=1.0 \ |
| persist.sys.sf.native_mode=2 \ |
| persist.sys.sf.color_mode=9 |
| |
| # Keymaster configuration |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml |
| |
| # Enable modem logging |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.radio.log_loc="/data/vendor/modem_dump" \ |
| ro.radio.log_prefix="modem_log_" |
| |
| # Enable modem logging for debug |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.sys.modem.diag.mdlog=true \ |
| persist.vendor.sys.modem.diag.mdlog_br_num=5 |
| else |
| endif |
| |
| # Preopt SystemUI |
| PRODUCT_DEXPREOPT_SPEED_APPS += \ |
| SystemUIGoogle |
| |
| # Enable stats logging in LMKD |
| TARGET_LMKD_STATS_LOG := true |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.lmk.log_stats=true |
| |
| # default usb oem functions |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.usb.usbradio.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl_gsi,rmnet_gsi |
| endif |
| |
| # Early phase offset configuration for SurfaceFlinger (b/75985430) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| debug.sf.early_phase_offset_ns=500000 |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| debug.sf.early_app_phase_offset_ns=500000 |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| debug.sf.early_gl_phase_offset_ns=3000000 |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| debug.sf.early_gl_app_phase_offset_ns=15000000 |
| |
| # Do not skip init trigger by default |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ |
| vendor.skip.init=0 |
| |
| BOARD_USES_QCNE := true |
| |
| #per device |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/redfin/init.redfin.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.redfin.rc |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config |
| |
| # power HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.power@1.3-service.pixel-libperfmgr |
| |
| # Disable ro.adb.secure for the factory build to work around dead touchscreens |
| # Bug: 116250643 |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.adb.secure=0 |
| |
| # GPS configuration file |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf |
| |
| # default atrace HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.atrace@1.0-service |
| |
| # Reliability reporting |
| PRODUCT_PACKAGES += \ |
| pixelstats-vendor |
| |
| # fastbootd |
| PRODUCT_PACKAGES += \ |
| android.hardware.fastboot@1.0-impl.pixel \ |
| fastbootd |
| |
| # insmod files |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.insmod.redfin.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.redfin.cfg |
| |
| # Use /product/etc/fstab.postinstall to mount system_other |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.postinstall.fstab.prefix=/product |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall |
| |
| # powerstats HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.power.stats@1.0-service.pixel |
| |
| # Recovery |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.recovery.device.rc:recovery/root/init.recovery.redfin.rc |
| |
| # Do not skip init trigger by default |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ |
| vendor.skip.init=0 |
| |
| # Oslo feature flag |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.vendor.aware_available=true |
| |
| QTI_TELEPHONY_UTILS := qti-telephony-utils |
| QTI_TELEPHONY_UTILS += qti_telephony_utils.xml |
| PRODUCT_PACKAGES += $(QTI_TELEPHONY_UTILS) |
| |
| HIDL_WRAPPER := qti-telephony-hidl-wrapper |
| HIDL_WRAPPER += qti_telephony_hidl_wrapper.xml |
| PRODUCT_PACKAGES += $(HIDL_WRAPPER) |
| |
| # Increment the SVN for any official public releases |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.build.svn=1 |
| |
| # ZRAM writeback |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.zram.mark_idle_delay_mins=60 \ |
| ro.zram.first_wb_delay_mins=180 \ |
| ro.zram.periodic_wb_delay_hours=24 |
| |
| # Disable SPU usage |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.gatekeeper.disable_spu = true |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json |