| # |
| # Copyright (C) 2018 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # define hardware platform |
| PRODUCT_PLATFORM := sm7250 |
| |
| LOCAL_PATH := device/google/redbull |
| |
| PRODUCT_VENDOR_MOVE_ENABLED := true |
| TARGET_BOARD_PLATFORM := lito |
| |
| PRODUCT_SOONG_NAMESPACES += \ |
| hardware/google/av \ |
| hardware/google/camera \ |
| hardware/google/interfaces \ |
| hardware/google/pixel \ |
| device/google/redbull \ |
| hardware/qcom/sm7250 \ |
| vendor/google/airbrush/floral \ |
| vendor/google/biometrics/face \ |
| vendor/google/darwinn \ |
| hardware/qcom/sm7250/display \ |
| vendor/google/camera \ |
| vendor/qcom/sm7250 \ |
| vendor/google/interfaces |
| |
| # Include GPS soong namespace |
| PRODUCT_SOONG_NAMESPACES += \ |
| hardware/qcom/sm7250/gps \ |
| vendor/qcom/sm7250/proprietary/gps \ |
| vendor/qcom/sm7250/codeaurora/location |
| |
| # Include sensors soong namespace |
| PRODUCT_SOONG_NAMESPACES += \ |
| vendor/qcom/sensors \ |
| vendor/google/tools/sensors |
| |
| # Single vendor RIL/Telephony/data with SM7250 |
| PRODUCT_SOONG_NAMESPACES += \ |
| vendor/qcom/sm7250/codeaurora/commonsys/telephony/ims/ims-ext-common \ |
| vendor/qcom/sm7250/codeaurora/dataservices/rmnetctl \ |
| vendor/qcom/sm7250/proprietary/commonsys/qcrilOemHook \ |
| vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/ims \ |
| vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/QtiTelephonyService \ |
| vendor/qcom/sm7250/proprietary/commonsys/telephony-apps/xdivert \ |
| vendor/qcom/sm7250/proprietary/qcril-data-hal \ |
| vendor/qcom/sm7250/proprietary/qcril-hal \ |
| vendor/qcom/sm7250/proprietary/data |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| keyguard.no_require_sim=true |
| |
| # enable cal by default on accel sensor |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.vendor.debug.sensors.accel_cal=1 |
| |
| # The default value of this variable is false and should only be set to true when |
| # the device allows users to retain eSIM profiles after factory reset of user data. |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| masterclear.allow_retain_esim_profiles_after_fdr=true |
| |
| PRODUCT_COPY_FILES += \ |
| device/google/redbull/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \ |
| device/google/redbull/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml \ |
| frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \ |
| frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/permissions/android.software.verified_boot.xml |
| |
| # Enforce privapp-permissions whitelist |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.control_privapp_permissions=enforce |
| |
| PRODUCT_PACKAGES += \ |
| messaging \ |
| dmabuf_dump |
| |
| TARGET_PRODUCT_PROP := $(LOCAL_PATH)/product.prop |
| |
| $(call inherit-product, $(LOCAL_PATH)/utils.mk) |
| |
| # Installs gsi keys into ramdisk, to boot a developer GSI with verified boot. |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/developer_gsi_keys.mk) |
| |
| PRODUCT_CHARACTERISTICS := nosdcard |
| PRODUCT_SHIPPING_API_LEVEL := 30 |
| |
| DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_KERNEL):kernel \ |
| $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_RECOVERY)/root/first_stage_ramdisk/fstab.$(PRODUCT_PLATFORM) \ |
| $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR_RAMDISK)/first_stage_ramdisk/fstab.$(PRODUCT_PLATFORM) \ |
| $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.$(PRODUCT_PLATFORM) \ |
| $(LOCAL_PATH)/init.hardware.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).rc \ |
| $(LOCAL_PATH)/init.modem.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.modem.sh \ |
| $(LOCAL_PATH)/init.power.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).power.rc \ |
| $(LOCAL_PATH)/init.radio.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.radio.sh \ |
| $(LOCAL_PATH)/init.hardware.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).usb.rc \ |
| $(LOCAL_PATH)/init.sensors.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.sensors.sh \ |
| $(LOCAL_PATH)/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc \ |
| $(LOCAL_PATH)/init.ramoops.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.ramoops.sh |
| |
| |
| MSM_VIDC_TARGET_LIST := lito # Get the color format from kernel headers |
| MASTER_SIDE_CP_TARGET_LIST := lito # ION specific settings |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.mpssrfs.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.diag.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.ipa.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).ipa.rc |
| else |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.mpssrfs.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.hardware.diag.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc |
| endif |
| |
| # A/B support |
| PRODUCT_PACKAGES += \ |
| otapreopt_script \ |
| cppreopts.sh \ |
| update_engine \ |
| update_verifier |
| |
| PRODUCT_PACKAGES += \ |
| e2fsck_ramdisk \ |
| tune2fs_ramdisk \ |
| resize2fs_ramdisk |
| |
| # Use Sdcardfs |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.sys.sdcardfs=1 |
| |
| PRODUCT_PACKAGES += \ |
| bootctrl.lito \ |
| bootctrl.lito.recovery |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.cp_system_other_odex=1 |
| |
| AB_OTA_POSTINSTALL_CONFIG += \ |
| RUN_POSTINSTALL_system=true \ |
| POSTINSTALL_PATH_system=system/bin/otapreopt_script \ |
| FILESYSTEM_TYPE_system=ext4 \ |
| POSTINSTALL_OPTIONAL_system=true |
| |
| PRODUCT_PACKAGES += \ |
| update_engine_sideload \ |
| sg_write_buffer \ |
| f2fs_io \ |
| check_f2fs |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.crypto.volume.filenames_mode=aes-256-cts |
| |
| AB_OTA_POSTINSTALL_CONFIG += \ |
| RUN_POSTINSTALL_vendor=true \ |
| POSTINSTALL_PATH_vendor=bin/checkpoint_gc \ |
| FILESYSTEM_TYPE_vendor=ext4 \ |
| POSTINSTALL_OPTIONAL_vendor=true |
| |
| # Userdata Checkpointing OTA GC |
| PRODUCT_PACKAGES += \ |
| checkpoint_gc |
| |
| # Context hub HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.contexthub@1.1-service.generic |
| |
| # Enable project quotas and casefolding for emulated storage without sdcardfs |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk) |
| |
| # The following modules are included in debuggable builds only. |
| PRODUCT_PACKAGES_DEBUG += \ |
| bootctl \ |
| r.vendor \ |
| update_engine_client |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.camera.concurrent.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.concurrent.xml \ |
| frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \ |
| frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \ |
| frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\ |
| frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\ |
| frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \ |
| frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \ |
| frameworks/native/data/etc/android.hardware.context_hub.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.context_hub.xml \ |
| frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \ |
| frameworks/native/data/etc/android.hardware.reboot_escrow.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.reboot_escrow.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.gsm.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.gsm.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.cdma.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.cdma.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.ims.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.ims.xml \ |
| frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \ |
| frameworks/native/data/etc/android.software.sip.voip.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.sip.voip.xml \ |
| frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \ |
| frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \ |
| frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ |
| frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \ |
| frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \ |
| frameworks/native/data/etc/android.software.vulkan.deqp.level-2020-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.vulkan.deqp.level.xml \ |
| frameworks/native/data/etc/android.hardware.telephony.carrierlock.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.carrierlock.xml \ |
| frameworks/native/data/etc/android.hardware.strongbox_keystore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.strongbox_keystore.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ |
| frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \ |
| frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml |
| |
| # Audio fluence, ns, aec property, voice and media volume steps |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.audio.sdk.fluencetype=fluencepro \ |
| persist.vendor.audio.fluence.voicecall=true \ |
| persist.vendor.audio.fluence.speaker=true \ |
| persist.vendor.audio.fluence.voicecomm=true \ |
| persist.vendor.audio.fluence.voicerec=false \ |
| ro.config.vc_call_vol_steps=7 \ |
| ro.config.media_vol_steps=25 \ |
| |
| # Audio Features |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.audio.feature.external_dsp.enable=true \ |
| vendor.audio.feature.external_speaker.enable=true \ |
| vendor.audio.feature.concurrent_capture.enable=false \ |
| vendor.audio.feature.a2dp_offload.enable=true \ |
| vendor.audio.feature.hfp.enable=true \ |
| vendor.audio.feature.hwdep_cal.enable=true \ |
| vendor.audio.feature.incall_music.enable=true \ |
| vendor.audio.feature.maxx_audio.enable=true \ |
| vendor.audio.feature.spkr_prot.enable=true \ |
| vendor.audio.feature.usb_offload.enable=true \ |
| vendor.audio.feature.audiozoom.enable=true \ |
| vendor.audio.feature.snd_mon.enable=true \ |
| vendor.audio.feature.multi_voice_session.enable=true \ |
| vendor.audio.capture.enforce_legacy_copp_sr=true \ |
| vendor.audio.offload.buffer.size.kb=256 \ |
| persist.vendor.audio_hal.dsp_bit_width_enforce_mode=24 \ |
| vendor.audio.offload.gapless.enabled=true \ |
| |
| # MaxxAudio effect and add rotation monitor |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.audio.monitorRotation=true |
| |
| # Iaxxx streming and factory binary |
| PRODUCT_PACKAGES += \ |
| libtunnel \ |
| libodsp \ |
| adnc_strm.primary.default \ |
| sound_trigger.primary.lito |
| |
| # Add Oslo test for debug rom |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PACKAGES += \ |
| tunneling_hal_test \ |
| sensor_param_test \ |
| oslo_config_test \ |
| odsp_api_test \ |
| crash_event_logger \ |
| dump_debug_info \ |
| get_pwr_stats \ |
| crash_trigger_test |
| endif |
| |
| # graphics |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.opengles.version=196610 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.display.paneltype=2 \ |
| ro.vendor.display.sensortype=1 \ |
| vendor.display.enable_async_powermode=0 \ |
| vendor.display.qdcm.mode_combine=1 \ |
| vendor.display.lbe.supported=1 |
| |
| # vndservicemanager has been removed from API30 devices (aosp/1235751) |
| # but we still need it for display services. |
| PRODUCT_PACKAGES += \ |
| vndservicemanager |
| |
| # camera google face detection |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.googfd.enable=1 |
| |
| # camera hal buffer management |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.managebuffer.enable=1 |
| |
| # camera enable RT thread |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.realtimethread=1 |
| |
| # Lets the vendor library that Google Camera HWL is enabled |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.camera.google_hwl.enabled=true \ |
| persist.camera.google_hwl.name=libgooglecamerahwl_impl.so |
| |
| # camera common HWL |
| CAMERA_COMMON_HWL := true |
| |
| # OEM Unlock reporting |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ |
| ro.oem_unlock_supported=1 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.cne.feature=1 \ |
| persist.vendor.data.iwlan.enable=true \ |
| persist.vendor.radio.RATE_ADAPT_ENABLE=1 \ |
| persist.vendor.radio.ROTATION_ENABLE=1 \ |
| persist.vendor.radio.VT_ENABLE=1 \ |
| persist.vendor.radio.VT_HYBRID_ENABLE=1 \ |
| persist.vendor.radio.apm_sim_not_pwdn=1 \ |
| persist.vendor.radio.custom_ecc=1 \ |
| persist.vendor.radio.data_ltd_sys_ind=1 \ |
| persist.vendor.radio.videopause.mode=1 \ |
| persist.vendor.radio.mt_sms_ack=30 \ |
| persist.vendor.radio.multisim_switch_support=true \ |
| persist.vendor.radio.sib16_support=1 \ |
| persist.vendor.radio.data_con_rprt=true \ |
| persist.vendor.radio.relay_oprt_change=1 \ |
| persist.vendor.radio.no_wait_for_card=1 \ |
| persist.vendor.radio.sap_silent_pin=1 \ |
| persist.vendor.radio.manual_nw_rej_ct=1 \ |
| persist.rcs.supported=1 \ |
| vendor.rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so \ |
| ro.hardware.keystore_desede=true \ |
| persist.vendor.radio.procedure_bytes=SKIP \ |
| persist.vendor.radio.hidl_dev_service=true \ |
| |
| # Enable reboot free DSDS |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.radio.reboot_on_modem_change=false |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| telephony.active_modems.max_count=2 |
| |
| # Disable snapshot timer |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.radio.snapshot_enabled=0 \ |
| persist.vendor.radio.snapshot_timer=0 |
| |
| # RenderScript HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.renderscript@1.0-impl |
| |
| # Light HAL |
| PRODUCT_PACKAGES += \ |
| lights.lito |
| |
| # Memtrack HAL |
| PRODUCT_PACKAGES += \ |
| memtrack.lito \ |
| android.hardware.memtrack@1.0-impl \ |
| android.hardware.memtrack@1.0-service |
| |
| # Bluetooth HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.bluetooth@1.0-impl-qti \ |
| android.hardware.bluetooth@1.0-service-qti |
| |
| #Bluetooth SAR HAL |
| PRODUCT_PACKAGES += \ |
| vendor.qti.hardware.bluetooth_sar@1.1-impl \ |
| vendor.qti.hardware.bluetooth_sar@1.0-impl |
| PRODUCT_PACKAGES_DEBUG += \ |
| bluetooth_sar_test |
| |
| #Bluetooth AFH HAL |
| PRODUCT_PACKAGES += \ |
| vendor.qti.hardware.bt_channel_avoidance@1.0-impl |
| |
| # Bluetooth SoC |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.qcom.bluetooth.soc=cherokee |
| |
| # Property for loading BDA from device tree |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.bt.bdaddr_path=/proc/device-tree/chosen/cdt/cdb2/bt_addr |
| |
| # Bluetooth WiPower |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.bluetooth.emb_wp_mode=false \ |
| ro.vendor.bluetooth.wipower=false |
| |
| # DRM HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.drm@1.3-service.clearkey \ |
| android.hardware.drm@1.3-service.widevine |
| |
| # NFC and Secure Element packages |
| PRODUCT_PACKAGES += \ |
| NfcNci \ |
| Tag \ |
| SecureElement \ |
| android.hardware.nfc@1.2-service.st \ |
| android.hardware.secure_element@1.2-service.st |
| |
| PRODUCT_COPY_FILES += \ |
| device/google/redbull/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ |
| device/google/redbull/nfc/libese-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-hal-st.conf \ |
| device/google/redbull/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.health@2.1-impl-redbull \ |
| android.hardware.health@2.1-service |
| |
| # Storage health HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.health.storage@1.0-service |
| |
| PRODUCT_PACKAGES += \ |
| libmm-omxcore \ |
| libOmxCore \ |
| libstagefrighthw \ |
| libOmxVdec \ |
| libOmxVdecHevc \ |
| libOmxVenc \ |
| libc2dcolorconvert |
| |
| # Enable Codec 2.0 |
| PRODUCT_PACKAGES += \ |
| libqcodec2_base \ |
| libqcodec2_utils \ |
| libqcodec2_platform \ |
| libqcodec2_core \ |
| libqcodec2_basecodec \ |
| libqcodec2_v4l2codec \ |
| vendor.qti.media.c2@1.0-service \ |
| codec2.vendor.ext-arm64.policy \ |
| codec2.vendor.base-arm64.policy |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| debug.stagefright.omx_default_rank=512 |
| |
| # Create input surface on the framework side |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| debug.stagefright.c2inputsurface=-1 \ |
| |
| # Disable OMX |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.media.omx=0 \ |
| |
| # Enable ECO service |
| QC2_HAVE_ECO_SERVICE := true |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.qc2.venc.avgqp.enable=1 |
| |
| # To reach target bitrate in CBR mode for IMS VT Call |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.ims.mm_minqp=1 |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.camera.provider@2.6-impl-google \ |
| android.hardware.camera.provider@2.6-service-google \ |
| camera.lito \ |
| lib_multicam_dualfov_capture_session \ |
| libgooglecamerahwl_impl \ |
| libqomx_core \ |
| libmmjpeg_interface \ |
| libmmcamera_interface \ |
| libcameradepthcalibrator |
| |
| # Google Camera HAL test libraries in debug builds |
| PRODUCT_PACKAGES_DEBUG += \ |
| libgoogle_camera_hal_proprietary_tests \ |
| libgoogle_camera_hal_tests.vendor |
| |
| PRODUCT_PACKAGES += \ |
| fs_config_dirs \ |
| fs_config_files |
| |
| # Boot control HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.boot@1.1-impl-pixel-legacy \ |
| android.hardware.boot@1.1-impl-pixel-legacy.recovery \ |
| android.hardware.boot@1.1-service \ |
| |
| #GNSS HAL |
| PRODUCT_PACKAGES += \ |
| libgps.utils \ |
| libgnss \ |
| libloc_core \ |
| liblocation_api \ |
| libbatching \ |
| libgeofencing \ |
| android.hardware.gnss@2.1-impl-qti \ |
| android.hardware.gnss@2.1-service-qti |
| |
| ENABLE_VENDOR_RIL_SERVICE := true |
| |
| HOSTAPD := hostapd |
| HOSTAPD += hostapd_cli |
| PRODUCT_PACKAGES += $(HOSTAPD) |
| |
| WPA := wpa_supplicant.conf |
| WPA += wpa_supplicant_wcn.conf |
| WPA += wpa_supplicant |
| PRODUCT_PACKAGES += $(WPA) |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PACKAGES += wpa_cli |
| endif |
| |
| # Wifi |
| PRODUCT_PACKAGES += \ |
| android.hardware.wifi@1.0-service \ |
| wificond \ |
| libwpa_client \ |
| WifiOverlay |
| |
| # WLAN driver configuration files |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \ |
| $(LOCAL_PATH)/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \ |
| $(LOCAL_PATH)/wifi_concurrency_cfg.txt:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wifi_concurrency_cfg.txt \ |
| $(LOCAL_PATH)/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini \ |
| |
| LIB_NL := libnl_2 |
| PRODUCT_PACKAGES += $(LIB_NL) |
| |
| # Audio effects |
| PRODUCT_PACKAGES += \ |
| libvolumelistener \ |
| libqcomvisualizer \ |
| libqcomvoiceprocessing \ |
| libqcompostprocbundle |
| |
| PRODUCT_PACKAGES += \ |
| audio.primary.lito \ |
| audio.a2dp.default \ |
| audio.usb.default \ |
| audio.r_submix.default \ |
| libaudio-resampler \ |
| audio.hearing_aid.default \ |
| audio.bluetooth.default |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.audio@6.0-impl:32 \ |
| android.hardware.audio@5.0-impl:32 \ |
| android.hardware.audio.effect@6.0-impl:32 \ |
| android.hardware.audio.effect@5.0-impl:32 \ |
| android.hardware.soundtrigger@2.3-impl \ |
| android.hardware.bluetooth.audio@2.0-impl \ |
| android.hardware.audio@2.0-service |
| |
| # Modules for Audio HAL |
| PRODUCT_PACKAGES += \ |
| libcirrusspkrprot \ |
| libsndmonitor \ |
| liba2dpoffload \ |
| btaudio_offload_if \ |
| libthermallistener \ |
| libmaxxaudio \ |
| libaudiozoom \ |
| libdevicestatelistener |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PACKAGES += \ |
| tinyplay \ |
| tinycap \ |
| tinymix \ |
| tinypcminfo \ |
| cplay |
| endif |
| |
| # Audio hal xmls |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/audio/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml |
| |
| # Cirrus calibration xml |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/audio/crus_sp_cal_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/crus_sp_cal_mixer_paths.xml |
| |
| # Audio Policy tables |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/bluetooth_hearing_aid_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_hearing_aid_audio_policy_configuration.xml \ |
| $(LOCAL_PATH)/audio/audio_configs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_configs.xml \ |
| $(LOCAL_PATH)/audio/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \ |
| $(LOCAL_PATH)/audio/audio_io_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_io_policy.conf |
| |
| # Audio ACDB data |
| |
| # Audio ACDB workspace files for QACT |
| |
| # Audio speaker tunning config data |
| |
| # Audio audiozoom config data |
| |
| # RT5514 SoundTrigger |
| PRODUCT_COPY_FILES += \ |
| device/google/redbull/audio/rt5514_dsp_fw1.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw1.bin \ |
| device/google/redbull/audio/rt5514_dsp_fw2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw2.bin \ |
| device/google/redbull/audio/rt5514_dsp_fw3.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw3.bin \ |
| device/google/redbull/audio/rt5514_dsp_fw4.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw4.bin \ |
| device/google/redbull/audio/rt5514p_dsp_fw1.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw1.bin \ |
| device/google/redbull/audio/rt5514p_dsp_fw2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw2.bin \ |
| device/google/redbull/audio/rt5514p_dsp_fw3.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw3.bin \ |
| device/google/redbull/audio/rt5514p_dsp_fw4.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514p_dsp_fw4.bin |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \ |
| $(LOCAL_PATH)/media_codecs_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml \ |
| $(LOCAL_PATH)/media_codecs_performance_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance_c2.xml \ |
| $(LOCAL_PATH)/media_codecs_omx.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_omx.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \ |
| $(LOCAL_PATH)/media_profiles_V1_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml |
| |
| # Vendor seccomp policy files for media components: |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.audio.snd_card.open.retries=50 |
| |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| # Subsystem ramdump |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.sys.ssr.enable_ramdumps=1 |
| endif |
| |
| # Subsystem silent restart |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.sys.ssr.restart_level=modem,adsp,slpi |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| # Sensor debug flag |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.debug.ash.logger=0 \ |
| persist.vendor.debug.ash.logger.time=0 |
| endif |
| |
| # setup dalvik vm configs |
| $(call inherit-product, frameworks/native/build/phone-xhdpi-6144-dalvik-heap.mk) |
| |
| # Use the default charger mode images |
| PRODUCT_PACKAGES += \ |
| charger_res_images |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| # b/36703476: Set default log size to 1M |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.logd.size=1M |
| # b/114766334: persist all logs by default rotating on 30 files of 1MiB |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| logd.logpersistd=logcatd \ |
| logd.logpersistd.size=30 |
| endif |
| |
| # Citadel |
| PRODUCT_PACKAGES += \ |
| citadeld \ |
| citadel_updater \ |
| android.hardware.authsecret@1.0-service.citadel \ |
| android.hardware.oemlock@1.0-service.citadel \ |
| android.hardware.weaver@1.0-service.citadel \ |
| android.hardware.keymaster@4.1-service.citadel \ |
| android.hardware.identity@1.0-service.citadel \ |
| wait_for_strongbox |
| |
| # Citadel debug stuff |
| PRODUCT_PACKAGES_DEBUG += \ |
| test_citadel |
| |
| # Storage: for factory reset protection feature |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.frp.pst=/dev/block/bootdevice/by-name/frp |
| |
| PRODUCT_PACKAGES += \ |
| vndk-sp |
| |
| # Override heap growth limit due to high display density on device |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| dalvik.vm.heapgrowthlimit=256m |
| |
| # Use 64-bit dex2oat for better dexopt time. |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| dalvik.vm.dex2oat64.enabled=true |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:system_ext/lib/android.hidl.base@1.0.so \ |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:system_ext/lib64/android.hidl.base@1.0.so \ |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:vendor/lib/android.hidl.base@1.0.so \ |
| $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:vendor/lib64/android.hidl.base@1.0.so \ |
| |
| PRODUCT_PACKAGES += \ |
| ipacm \ |
| IPACM_cfg.xml |
| |
| #Set default CDMA subscription to RUIM |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.telephony.default_cdma_sub=0 |
| |
| # Set network mode to Global (NR 5G, LTE, CDMA, EvDo, GSM and WCDMA) by default and no DSDS/DSDA |
| PRODUCT_PROPERTY_OVERRIDES += ro.telephony.default_network=27 |
| |
| # Set display color mode to Adaptive by default |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.sys.sf.color_saturation=1.0 \ |
| persist.sys.sf.native_mode=2 \ |
| persist.sys.sf.color_mode=9 |
| |
| # Keymaster configuration |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml \ |
| frameworks/native/data/etc/android.hardware.device_unique_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.device_unique_attestation.xml |
| |
| # Enable modem logging |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.radio.log_loc="/data/vendor/modem_dump" \ |
| ro.vendor.radio.log_prefix="modem_log_" |
| |
| # Enable modem logging for debug |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.sys.modem.diag.mdlog=true |
| else |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.sys.modem.diag.mdlog=false |
| endif |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.sys.modem.diag.mdlog_br_num=5 |
| |
| # Enable tcpdump_logger on userdebug and eng |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.tcpdump.log.alwayson=false \ |
| persist.vendor.tcpdump.log.br_num=5 |
| endif |
| |
| # Preopt SystemUI |
| PRODUCT_DEXPREOPT_SPEED_APPS += \ |
| SystemUIGoogle |
| |
| # Enable stats logging in LMKD |
| TARGET_LMKD_STATS_LOG := true |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.lmk.log_stats=true |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/init.gadgethal.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.gadgethal.sh |
| |
| # default usb oem functions |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.usb.usbradio.config=diag |
| endif |
| |
| # Enable app/sf phase offset as durations. The numbers below are translated from the existing |
| # positive offsets by finding the duration app/sf will have with the offsets. |
| # For SF the previous value was 6ms which under 16.6ms vsync time (60Hz) will leave SF with ~10.5ms |
| # for each frame. For App the previous value was 2ms which under 16.6ms vsync time will leave the |
| # App with ~20.5ms (16.6ms * 2 - 10.5ms - 2ms). The other values were calculated similarly. |
| # Full comparison between the old vs. the new values are captured in |
| # https://docs.google.com/spreadsheets/d/1a_5cVNY3LUAkeg-yL56rYQNwved6Hy-dvEcKSxp6f8k/edit |
| |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.use_phase_offsets_as_durations=1 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.sf.duration=10500000 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.app.duration=20500000 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.sf.duration=16000000 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.app.duration=16500000 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.sf.duration=13500000 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.app.duration=21000000 |
| |
| # Do not skip init trigger by default |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ |
| vendor.skip.init=0 |
| |
| # Enable backpressure for GL comp |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| debug.sf.enable_gl_backpressure=1 |
| |
| BOARD_USES_QCNE := true |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config |
| |
| # GPS configuration file |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf |
| |
| # default atrace HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.atrace@1.0-service |
| |
| # dynamic partition |
| PRODUCT_USE_DYNAMIC_PARTITIONS := true |
| |
| # fastbootd |
| PRODUCT_PACKAGES += \ |
| android.hardware.fastboot@1.0-impl.pixel \ |
| fastbootd |
| |
| # Use /product/etc/fstab.postinstall to mount system_other |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.postinstall.fstab.prefix=/product |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall |
| |
| # powerstats HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.power.stats@1.0-service.pixel |
| |
| QTI_TELEPHONY_UTILS := qti-telephony-utils |
| QTI_TELEPHONY_UTILS += qti_telephony_utils.xml |
| PRODUCT_PACKAGES += $(QTI_TELEPHONY_UTILS) |
| |
| HIDL_WRAPPER := qti-telephony-hidl-wrapper |
| HIDL_WRAPPER += qti_telephony_hidl_wrapper.xml |
| PRODUCT_PACKAGES += $(HIDL_WRAPPER) |
| |
| # Increment the SVN for any official public releases |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.vendor.build.svn=1 |
| |
| # ZRAM writeback |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.zram.mark_idle_delay_mins=60 \ |
| ro.zram.first_wb_delay_mins=180 \ |
| ro.zram.periodic_wb_delay_hours=24 |
| |
| # Enable iwlan service logging for debug |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PROPERTY_OVERRIDES += persist.vendor.iwlan.logging.logcat=true |
| endif |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/task_profiles.json:$(TARGET_COPY_OUT_VENDOR)/etc/task_profiles.json |
| |
| # Set Vendor SPL to match platform |
| VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH) |
| |
| PRODUCT_PROPERTY_OVERRIDES += vendor.audio.adm.buffering.ms=3 |
| PRODUCT_PROPERTY_OVERRIDES += vendor.audio_hal.period_multiplier=2 |
| PRODUCT_PROPERTY_OVERRIDES += af.fast_track_multiplier=1 |
| |
| # Enable AAudio MMAP/NOIRQ data path. |
| # 1 is AAUDIO_POLICY_NEVER means only use Legacy path. |
| # 2 is AAUDIO_POLICY_AUTO means try MMAP then fallback to Legacy path. |
| # 3 is AAUDIO_POLICY_ALWAYS means only use MMAP path. |
| PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_policy=2 |
| # 1 is AAUDIO_POLICY_NEVER means only use SHARED mode |
| # 2 is AAUDIO_POLICY_AUTO means try EXCLUSIVE then fallback to SHARED mode. |
| # 3 is AAUDIO_POLICY_ALWAYS means only use EXCLUSIVE mode. |
| PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_exclusive_policy=2 |
| |
| # Increase the apparent size of a hardware burst from 1 msec to 2 msec. |
| # A "burst" is the number of frames processed at one time. |
| # That is an increase from 48 to 96 frames at 48000 Hz. |
| # The DSP will still be bursting at 48 frames but AAudio will think the burst is 96 frames. |
| # A low number, like 48, might increase power consumption or stress the system. |
| PRODUCT_PROPERTY_OVERRIDES += aaudio.hw_burst_min_usec=2000 |
| |
| # A2DP offload enabled for compilation |
| AUDIO_FEATURE_ENABLED_A2DP_OFFLOAD := true |
| |
| # A2DP offload supported |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.bluetooth.a2dp_offload.supported=true |
| |
| # A2DP offload disabled (UI toggle property) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.bluetooth.a2dp_offload.disabled=false |
| |
| # A2DP offload DSP supported encoder list |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac |
| |
| # Enable AAC frame ctl for A2DP sinks |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.bt.aac_frm_ctl.enabled=true |
| |
| # Enable VBR frame ctl |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.bt.aac_vbr_frm_ctl.enabled=true |
| |
| # Set lmkd options |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.config.low_ram = false \ |
| ro.lmk.log_stats = true \ |
| |
| # charger |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.charger.enable_suspend=true |
| |
| # Modem logging file |
| PRODUCT_COPY_FILES += \ |
| device/google/redbull/init.logging.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).logging.rc |
| |
| # Pixelstats broken mic detection |
| PRODUCT_PROPERTY_OVERRIDES += vendor.audio.mic_break=true |
| |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true |
| |
| # Audio low latency feature |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml |
| |
| # Pro audio feature |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml |
| |
| # Must align with HAL types Dataspace |
| # The data space of wide color gamut composition preference is Dataspace::DISPLAY_P3 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.wcg_composition_dataspace=143261696 |
| |
| # MIDI feature |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml |
| |
| # Set thermal warm reset |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.thermal_warmreset = true \ |
| |
| # Resume on Reboot support |
| PRODUCT_PACKAGES += \ |
| android.hardware.rebootescrow-service.citadel |
| |
| # Vendor verbose logging default property |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.verbose_logging_enabled=true |
| else |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.verbose_logging_enabled=false |
| endif |
| |
| # Disable Rescue Party on userdebug & eng build |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.sys.disable_rescue=true |
| endif |
| |
| # Enable Incremental on the device via kernel module |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.incremental.enable=module:/vendor/lib/modules/incrementalfs.ko |
| |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota.mk) |
| |
| ################################################################################# |
| # This is the End of device-common.mk file. |
| # Now, Pickup other split device-common.mk files: |
| ################################################################################# |
| |
| # Display |
| -include hardware/qcom/sm7250/display/config/display-product.mk |
| -include vendor/qcom/sm7250/proprietary/display/config/display-product-proprietary.mk |
| |
| # Security |
| -include vendor/qcom/sm7250/proprietary/securemsm/config/keymaster_vendor_proprietary_board.mk |
| -include vendor/qcom/sm7250/proprietary/securemsm/config/keymaster_vendor_proprietary_product.mk |
| -include vendor/qcom/sm7250/proprietary/securemsm/config/cpz_vendor_proprietary_board.mk |
| -include vendor/qcom/sm7250/proprietary/securemsm/config/cpz_vendor_proprietary_product.mk |
| -include vendor/qcom/sm7250/proprietary/securemsm/config/smcinvoke_vendor_proprietary_product.mk |
| -include vendor/qcom/sm7250/proprietary/commonsys/securemsm/securemsm_system_product.mk |
| |
| # RIL |
| -include vendor/qcom/sm7250/proprietary/commonsys-intf/data/data_commonsys-intf_vendor_product.mk |
| |
| # Sensor |
| ifneq ($(wildcard vendor/google/tools),) |
| ENABLE_SENSOR_SSC_FOR_SOONG := true |
| endif |
| -include vendor/qcom/sm7250/proprietary/sensors-see/build_config/sns_vendor_board.mk |
| -include vendor/qcom/sm7250/proprietary/sensors-see/build_config/sns_vendor_product.mk |
| |
| # Project |
| include hardware/google/pixel/common/pixel-common-device.mk |
| |
| # Factory OTA |
| -include vendor/google/factoryota/client/factoryota.mk |
| |
| # storage |
| -include hardware/google/pixel/pixelstats/device.mk |
| |
| # thermal |
| -include hardware/google/pixel/thermal/device.mk |
| |
| # power HAL |
| -include hardware/google/pixel/power-libperfmgr/aidl/device.mk |
| |
| # mm_event |
| -include hardware/google/pixel/mm/device.mk |
| ################################################################################# |