| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2021, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| <!-- Indicate whether to allow the device to suspend when the screen is off |
| due to the proximity sensor. This resource should only be set to true |
| if the sensor HAL correctly handles the proximity sensor as a wake-up source. |
| Otherwise, the device may fail to wake out of suspend reliably. |
| The default is false. --> |
| <bool name="config_suspendWhenScreenOffDueToProximity">true</bool> |
| |
| <!-- Flag indicating whether the we should enable the automatic brightness in Settings. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- Minimum screen brightness allowed by the power manager. --> |
| <integer name="config_screenBrightnessDim">6</integer> |
| |
| <!-- Minimum screen brightness setting allowed by power manager. |
| The user is forbidden from setting the brightness below this level. --> |
| <item name="config_screenBrightnessSettingMinimumFloat" format="float" type="dimen">0.0</item> |
| |
| <!-- Maximum screen brightness allowed by the power manager. |
| The user is forbidden from setting the brightness above this level. --> |
| <item name="config_screenBrightnessSettingMaximumFloat" format="float" type="dimen">1.0</item> |
| |
| <!-- Default screen brightness setting |
| Must be in the range specified by minimum and maximum. --> |
| <item name="config_screenBrightnessSettingDefaultFloat" format="float" type="dimen">0.17429718</item> |
| |
| <!-- Whether the display cutout region of the main built-in display should be forced to |
| black in software (to avoid aliasing or emulate a cutout that is not physically existent). |
| --> |
| <bool name="config_fillMainBuiltInDisplayCutout">true</bool> |
| |
| <!-- Display cutout configuration --> |
| <string translatable="false" name="config_mainBuiltInDisplayCutout"> |
| M 676,72 |
| a 43,43 0 1 0 86,0 |
| a 43,43 0 1 0 -86,0 |
| Z |
| @left |
| </string> |
| |
| <string translatable="false" name="config_mainBuiltInDisplayCutoutRectApproximation"> |
| M 653,0 |
| h 145 |
| v 130 |
| h -145 |
| Z |
| @left |
| </string> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N 1 zones as follows: |
| Zone 0: 0 <= LUX < array[0] |
| Zone 1: array[0] <= LUX < array[1] |
| ... |
| Zone N: array[N - 1] <= LUX < array[N] |
| Zone N + 1 array[N] <= LUX < infinity |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| <item>1</item> |
| <item>2</item> |
| <item>3</item> |
| <item>4</item> |
| <item>8</item> |
| <item>12</item> |
| <item>20</item> |
| <item>33</item> |
| <item>55</item> |
| <item>90</item> |
| <item>148</item> |
| <item>245</item> |
| <item>403</item> |
| <item>665</item> |
| <item>1097</item> |
| <item>1808</item> |
| <item>2981</item> |
| <item>5000</item> |
| <item>10000</item> |
| <item>20000</item> |
| </integer-array> |
| |
| <!-- Array of desired screen brightness in nits corresponding to the lux values |
| in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and |
| config_screenBrightnessMaximumNits, the display brightness is defined as the measured |
| brightness of an all-white image. |
| |
| If this is defined then: |
| - config_autoBrightnessLcdBacklightValues should not be defined |
| - config_screenBrightnessNits must be defined |
| - config_screenBrightnessBacklight must be defined |
| |
| This array should have size one greater than the size of the config_autoBrightnessLevels |
| array. The brightness values must be non-negative and non-decreasing. This must be |
| overridden in platform specific overlays --> |
| <array name="config_autoBrightnessDisplayValuesNits"> |
| <item>5.139055</item> <!-- 0 - 1 --> |
| <item>9.962018965</item> <!-- 1 - 2 --> |
| <item>18.34822964</item> <!-- 2 - 3 --> |
| <item>21.55068128</item> <!-- 3 - 4 --> |
| <item>24.0167788</item> <!-- 4 - 8 --> |
| <item>30.62162162</item> <!-- 8 - 12 --> |
| <item>35.09486396</item> <!-- 12 - 20 --> |
| <item>41.2249643</item> <!-- 20 - 33 --> |
| <item>47.6760716</item> <!-- 33 - 55 --> |
| <item>55.73002427</item> <!-- 55 - 90 --> |
| <item>66.24126116</item> <!-- 90 - 148 --> |
| <item>79.67614115</item> <!-- 148 - 245 --> |
| <item>98.04727274</item> <!-- 245 - 403 --> |
| <item>125.1221991</item> <!-- 403 - 665 --> |
| <item>161.6875093</item> <!-- 665 - 1097 --> |
| <item>208.4885553</item> <!-- 1097 - 1808 --> |
| <item>264.8221315</item> <!-- 1808 - 2981 --> |
| <item>327.8974352</item> <!-- 2981 - 5000 --> |
| <item>401.1676739</item> <!-- 5000 - 10000 --> |
| <item>750.0</item> <!-- 10000 -20000 --> |
| <item>1100.0</item> <!-- 20000+ --> |
| </array> |
| |
| <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used |
| for debouncing the light sensor. Different constants are used to debounce the light sensor |
| when adapting to brighter or darker environments. This parameter controls how quickly |
| brightness changes occur in response to an observed change in light level that exceeds the |
| hysteresis threshold. --> |
| <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer> |
| <integer name="config_autoBrightnessDarkeningLightDebounce">4000</integer> |
| |
| <!-- The default refresh rate. We manage this using the peak refresh rate setting. Set this |
| value to 0 so it has no effect. --> |
| <integer name="config_defaultRefreshRate">0</integer> |
| |
| <!-- The default peak refresh rate. --> |
| <integer name="config_defaultPeakRefreshRate">120</integer> |
| |
| <!-- MMS user agent string --> |
| <string name="config_mms_user_agent" translatable="false">ge2ae</string> |
| <!-- MMS user agent profile url --> |
| <string name="config_mms_user_agent_profile_url" translatable="false">http://www.gstatic.com/android/sms/GE2AE.xml</string> |
| |
| <!-- Type of the udfps long press sensor. Empty if long press is not supported. --> |
| <string name="config_dozeUdfpsLongPressSensorType" translatable="false">com.google.sensor.long_press</string> |
| |
| <!-- How long it takes for the HW to start illuminating after the illumination is requested. |
| It takes 3 frames to enable the Local High-Brightness Mode (LHBM), which at 120 Hz screen |
| refresh rate equates to a 25 ms delay. --> |
| <integer name="config_udfps_illumination_transition_ms">25</integer> |
| |
| <!-- the number of the max cached processes in the system. --> |
| <integer name="config_customizedMaxCachedProcesses">64</integer> |
| |
| <integer-array name="config_ambientThresholdLevels"> |
| <item>1</item> |
| <item>2</item> |
| <item>3</item> |
| <item>4</item> |
| <item>5</item> |
| <item>6</item> |
| <item>7</item> |
| <item>8</item> |
| <item>9</item> |
| <item>10</item> |
| <item>20</item> |
| <item>30</item> |
| <item>40</item> |
| <item>50</item> |
| <item>60</item> |
| <item>70</item> |
| <item>80</item> |
| <item>90</item> |
| <item>100</item> |
| </integer-array> |
| |
| <integer-array name="config_ambientBrighteningThresholds"> |
| <item>11373</item> |
| <item>5000</item> |
| <item>4333</item> |
| <item>3666</item> |
| <item>3000</item> |
| <item>2760</item> |
| <item>2520</item> |
| <item>2280</item> |
| <item>2040</item> |
| <item>1800</item> |
| <item>800</item> |
| <item>527</item> |
| <item>500</item> |
| <item>470</item> |
| <item>396</item> |
| <item>322</item> |
| <item>248</item> |
| <item>174</item> |
| <item>99</item> |
| <item>99</item> |
| </integer-array> |
| |
| <integer-array name="config_ambientDarkeningThresholds"> |
| <item>853</item> |
| <item>700</item> |
| <item>683</item> |
| <item>666</item> |
| <item>650</item> |
| <item>640</item> |
| <item>630</item> |
| <item>620</item> |
| <item>610</item> |
| <item>600</item> |
| <item>500</item> |
| <item>500</item> |
| <item>440</item> |
| <item>385</item> |
| <item>348</item> |
| <item>311</item> |
| <item>274</item> |
| <item>237</item> |
| <item>200</item> |
| <item>200</item> |
| </integer-array> |
| |
| <!-- UDFPS does not support gestures --> |
| <bool name="config_fingerprintSupportsGestures">false</bool> |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true --> |
| <bool translatable="false" name="skip_restoring_network_selection">true</bool> |
| |
| <!-- If face auth sends the user directly to home/last open app, or stays on keyguard by default--> |
| <bool name="config_faceAuthDismissesKeyguard">false</bool> |
| </resources> |