| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2016, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| |
| <!-- If this is true, the screen will fade off. --> |
| <bool name="config_animateScreenLights">false</bool> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">true</bool> |
| |
| <!-- Indicate whether closing the lid causes the device to go to sleep and opening |
| it causes the device to wake up. |
| The default is false. --> |
| <bool name="config_lidControlsSleep">true</bool> |
| |
| <!-- Indicate whether to allow the device to suspend when the screen is off |
| due to the proximity sensor. This resource should only be set to true |
| if the sensor HAL correctly handles the proximity sensor as a wake-up source. |
| Otherwise, the device may fail to wake out of suspend reliably. |
| The default is false. --> |
| <bool name="config_suspendWhenScreenOffDueToProximity">true</bool> |
| |
| <!-- Flag indicating whether the we should enable the automatic brightness in Settings. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used |
| for debouncing the light sensor. Different constants are used to debounce the light sensor |
| when adapting to brighter or darker environments. This parameter controls how quickly |
| brightness changes occur in response to an observed change in light level that exceeds the |
| hysteresis threshold. --> |
| <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer> |
| <integer name="config_autoBrightnessDarkeningLightDebounce">4000</integer> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N 1 zones as follows: |
| |
| Zone 0: 0 <= LUX < array[0] |
| Zone 1: array[0] <= LUX < array[1] |
| ... |
| Zone N: array[N - 1] <= LUX < array[N] |
| Zone N + 1 array[N] <= LUX < infinity |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| <item>1</item> |
| <item>2</item> |
| <item>3</item> |
| <item>4</item> |
| <item>8</item> |
| <item>12</item> |
| <item>20</item> |
| <item>33</item> |
| <item>55</item> |
| <item>90</item> |
| <item>148</item> |
| <item>245</item> |
| <item>403</item> |
| <item>665</item> |
| <item>1097</item> |
| <item>1808</item> |
| <item>2981</item> |
| <item>5000</item> |
| </integer-array> |
| |
| <!-- Array of desired screen brightness in nits corresponding to the lux values |
| in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and |
| config_screenBrightnessMaximumNits, the display brightness is defined as the measured |
| brightness of an all-white image. |
| |
| If this is defined then: |
| - config_autoBrightnessLcdBacklightValues should not be defined |
| - config_screenBrightnessNits must be defined |
| - config_screenBrightnessBacklight must be defined |
| |
| This array should have size one greater than the size of the config_autoBrightnessLevels |
| array. The brightness values must be non-negative and non-decreasing. This must be |
| overridden in platform specific overlays --> |
| <array name="config_autoBrightnessDisplayValuesNits"> |
| <item>10.45935</item> <!-- 0-1 --> |
| <item>29.25559</item> <!-- 1-2 --> |
| <item>34.240692</item> <!-- 2-3 --> |
| <item>37.514347</item> <!-- 3-4 --> |
| <item>40.018696</item> <!-- 4-8 --> |
| <item>46.885098</item> <!-- 8-12 --> |
| <item>51.626434</item> <!-- 12-20 --> |
| <item>58.610405</item> <!-- 20-33 --> |
| <item>66.890915</item> <!-- 33-55 --> |
| <item>77.61644</item> <!-- 55-90 --> |
| <item>90.221886</item> <!-- 90-148 --> |
| <item>105.80314</item> <!-- 148-245 --> |
| <item>126.073845</item> <!-- 245-403 --> |
| <item>154.16931</item> <!-- 403-665 --> |
| <item>191.83717</item> <!-- 665-1097 --> |
| <item>240.74442</item> <!-- 1097-1808 --> |
| <item>294.84857</item> <!-- 1808-2981 --> |
| <item>348.05453</item> <!-- 2981-5000 --> |
| <item>394.98703</item> <!-- 5000+ --> |
| </array> |
| |
| <!-- An array describing the screen's backlight values corresponding to the brightness |
| values in the config_screenBrightnessNits array. |
| |
| This array should be equal in size to config_screenBrightnessBacklight. --> |
| <integer-array name="config_screenBrightnessBacklight"> |
| <item>0</item> |
| <item>15</item> |
| <item>30</item> |
| <item>45</item> |
| <item>60</item> |
| <item>75</item> |
| <item>90</item> |
| <item>105</item> |
| <item>120</item> |
| <item>135</item> |
| <item>150</item> |
| <item>165</item> |
| <item>180</item> |
| <item>195</item> |
| <item>210</item> |
| <item>225</item> |
| <item>240</item> |
| <item>255</item> |
| </integer-array> |
| |
| <!-- An array of floats describing the screen brightness in nits corresponding to the backlight |
| values in the config_screenBrightnessBacklight array. On OLED displays these values |
| should be measured with an all white image while the display is in the fully on state. |
| Note that this value should *not* reflect the maximum brightness value for any high |
| brightness modes but only the maximum brightness value obtainable in a sustainable manner. |
| |
| This array should be equal in size to config_screenBrightnessBacklight --> |
| <array name="config_screenBrightnessNits"> |
| <item>0</item> |
| <item>26.11</item> |
| <item>50.5</item> |
| <item>74.17</item> |
| <item>96.89</item> |
| <item>118.3</item> |
| <item>139.8</item> |
| <item>162.9</item> |
| <item>189.8</item> |
| <item>217.4</item> |
| <item>240.4</item> |
| <item>265.3</item> |
| <item>288.7</item> |
| <item>316</item> |
| <item>340.8</item> |
| <item>357.9</item> |
| <item>376.2</item> |
| <item>392.9</item> |
| </array> |
| |
| <!-- Minimum screen brightness allowed by the power manager. --> |
| <integer name="config_screenBrightnessDim">6</integer> |
| |
| <!-- Screen brightness when dozing. --> |
| <integer name="config_screenBrightnessDoze">13</integer> |
| |
| <!-- Whether the display blanks itself when going from a doze to a non-doze state --> |
| <bool name="config_displayBlanksAfterDoze">true</bool> |
| |
| <!-- Default screen brightness setting. |
| Must be in the range specified by minimum and maximum. --> |
| <integer name="config_screenBrightnessSettingDefault">98</integer> |
| |
| <!-- Default screen brightness for VR setting. Default value: 0x56 => 86. --> |
| <integer name="config_screenBrightnessForVrSettingDefault">86</integer> |
| |
| <!-- Minimum screen brightness setting allowed by the power manager. |
| The user is forbidden from setting the brightness below this level. --> |
| <integer name="config_screenBrightnessSettingMinimum">1</integer> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently |
| in hardware. --> |
| <bool name="config_setColorTransformAccelerated">true</bool> |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true --> |
| <bool translatable="false" name="skip_restoring_network_selection">true</bool> |
| |
| <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> |
| <bool name="config_cellBroadcastAppLinks">true</bool> |
| |
| <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. --> |
| <integer name="config_shutdownBatteryTemperature">680</integer> |
| |
| <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> |
| <bool name="config_intrusiveNotificationLed">true</bool> |
| |
| <!-- Default color for notification LED is white. --> |
| <color name="config_defaultNotificationColor">#ffffffff</color> |
| |
| <!-- Default LED on time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOn">1000</integer> |
| |
| <!-- Default LED off time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOff">9000</integer> |
| |
| <!-- reference volume index for music stream to limit headphone volume and display warning --> |
| <integer name="config_safe_media_volume_index">4</integer> |
| |
| <!-- Whether Multiuser UI should be shown --> |
| <bool name="config_enableMultiUserUI">true</bool> |
| |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">4</integer> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| USB interfaces. If the device doesn't want to support tething over USB this should |
| be empty. An example would be "usb.*" --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| <item>"usb\\d"</item> |
| <item>"rndis\\d"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| <item>"wlan0"</item> |
| <item>"softap.*"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this |
| should be empty. --> |
| <string-array translatable="false" name="config_tether_bluetooth_regexs"> |
| <item>"bt-pan"</item> |
| </string-array> |
| |
| <!-- Max number of scan filters supported by blutooth controller. 0 if the |
| device does not support hardware scan filters--> |
| <integer translatable="false" name="config_bluetooth_max_scan_filters">1</integer> |
| |
| <!-- Max number of advertisers supported by bluetooth controller. 0 if the |
| device does not support multiple advertisement--> |
| <integer translatable="false" name="config_bluetooth_max_advertisers">4</integer> |
| |
| <!-- Operating voltage for bluetooth controller. 0 by default--> |
| <integer translatable="false" name="config_bluetooth_operating_voltage_mv">3300</integer> |
| |
| <!-- Boolean indicating if current platform supports HFP inband ringing --> |
| <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool> |
| |
| <!-- Array of allowable ConnectivityManager network types for tethering --> |
| <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or |
| [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH --> |
| <integer-array translatable="false" name="config_tether_upstream_types"> |
| <item>1</item> |
| <item>0</item> |
| <item>5</item> |
| <item>7</item> |
| </integer-array> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,2,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_dun,4,0,2,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"mobile_fota,10,0,2,60000,true"</item> |
| <item>"mobile_ims,11,0,2,60000,true"</item> |
| <item>"mobile_cbs,12,0,2,60000,true"</item> |
| <item>"mobile_ia,14,0,2,-1,true"</item> |
| <item>"bluetooth,7,7,2,-1,true"</item> |
| <item>"ethernet,9,9,9,-1,true"</item> |
| <item>"mobile_emergency,15,0,2,-1,true</item> |
| </string-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| <item>"7,1"</item> |
| <item>"9,1"</item> |
| </string-array> |
| |
| <!-- If the hardware supports specially marking packets that caused a wakeup of the |
| main CPU, set this value to the mark used. --> |
| <integer name="config_networkWakeupPacketMark">0x80000000</integer> |
| |
| <!-- Mask to use when checking skb mark defined in config_networkWakeupPacketMark above. --> |
| <integer name="config_networkWakeupPacketMask">0x80000000</integer> |
| |
| <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> |
| <bool translatable="false" name="config_wifi_dual_band_support">true</bool> |
| |
| <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform --> |
| <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset has background scan support --> |
| <bool translatable="false" name="config_wifi_background_scan_support">true</bool> |
| |
| <!-- Integer thresholds, do not connect to APs with RSSI lower than these values --> |
| <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_5GHz">-77</integer> |
| <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_24GHz">-80</integer> |
| <!-- Integer thresholds for low network score, should be somewhat less than the entry threshholds --> |
| <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-80</integer> |
| <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-83</integer> |
| |
| <!-- Setting this true forces the headset jack switches to use the/dev/input/event subsystem |
| rather than the uevent framework. --> |
| <bool name="config_useDevInputEventForAudioJack">true</bool> |
| |
| <!-- Vibrator pattern for feedback about a long screen/key press --> |
| <integer-array name="config_longPressVibePattern"> |
| <item>0</item> |
| <item>7</item> |
| <item>10</item> |
| </integer-array> |
| |
| <!-- Make things go fast --> |
| <bool name="config_ui_enableFadingMarquee">false</bool> |
| |
| <!-- Vibrator pattern for feedback about touching a virtual key --> |
| <integer-array name="config_virtualKeyVibePattern"> |
| <item>0</item> |
| <item>5</item> |
| <item>10</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> |
| <integer-array name="config_keyboardTapVibePattern"> |
| <item>10</item> |
| </integer-array> |
| |
| <!-- Wifi driver supports batched scan --> |
| <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool> |
| |
| <!-- Boolean indicating whether or not to revert to default country code when cellular |
| radio is unable to find any MCC information to infer wifi country code from --> |
| <bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">true</bool> |
| |
| <!-- Boolean indicating whether or not wifi should turn off when emergency call is made --> |
| <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">true</bool> |
| |
| <!-- Enable doze mode |
| ComponentName of a dream to show whenever the system would otherwise have gone to sleep. --> |
| <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> |
| |
| <!-- If true, the doze component is not started until after the screen has been turned off |
| and the screen off animation has been performed. --> |
| <bool name="config_dozeAfterScreenOffByDefault">true</bool> |
| |
| <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. --> |
| <bool name="config_dozePulsePickup">true</bool> |
| |
| <!-- Type of the double tap sensor. Empty if double tap is not supported. --> |
| <string name="config_dozeDoubleTapSensorType" translatable="false">com.google.sensor.double_touch</string> |
| |
| <!-- ImsService package name to bind to by default, if config_dynamic_bind_ims is true --> |
| <string name="config_ims_package">org.codeaurora.ims</string> |
| |
| <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically --> |
| <bool name="config_dynamic_bind_ims">true</bool> |
| |
| <!-- Specifies whether to decouple the interactive state of the device from the display on/off state. --> |
| <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool> |
| |
| <!-- Is the device capable of hot swapping an UICC Card --> |
| <bool name="config_hotswapCapable">true</bool> |
| |
| <!-- Flag specifying whether VoLTE is availasble on device --> |
| <bool name="config_device_volte_available">true</bool> |
| |
| <!-- Flag specifying whether VoLTE is available on device --> |
| <bool name="config_device_vt_available">true</bool> |
| |
| <!-- Flag specifying whether WFC over IMS is availasble on device --> |
| <bool name="config_device_wfc_ims_available">true</bool> |
| |
| <!-- Configure mobile tcp buffer sizes in the form: |
| rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max |
| If no value is found for the rat-name in use, the system default will be applied. |
| --> |
| <string-array name="config_mobile_tcp_buffers"> |
| <item>umts:131072,262144,1452032,4096,16384,399360</item> |
| <item>hspa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hsupa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hsdpa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hspap:131072,262144,2441216,4096,16384,399360</item> |
| <item>edge:16384,32768,131072,4096,16384,65536</item> |
| <item>gprs:4096,8192,24576,4096,8192,24576</item> |
| <item>1xrtt:16384,32768,131070,4096,16384,102400</item> |
| <item>evdo:131072,262144,1048576,4096,16384,524288</item> |
| <item>lte:524288,1048576,8388608,262144,524288,4194304</item> |
| </string-array> |
| |
| <!-- Configure wifi tcp buffersizes in the form: |
| rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max --> |
| <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,4194304,262144,524288,1048576</string> |
| |
| <!-- Config SoftAP 2G channel list --> |
| <string translatable="false" name="config_wifi_framework_sap_2G_channel_list">6</string> |
| |
| <!-- Config determines whether to update phone object when voice registration |
| state changes. Voice radio tech change will always trigger an update of |
| phone object irrespective of this config --> |
| <bool name="config_switch_phone_on_voice_reg_state_change">false</bool> |
| |
| |
| <!-- Use ERI text for network name on CDMA LTE --> |
| <bool name="config_LTE_eri_for_network_name">false</bool> |
| |
| <!-- Values for GPS configuration --> |
| <string-array translatable="false" name="config_gpsParameters"> |
| <item>SUPL_HOST=supl.google.com</item> |
| <item>SUPL_PORT=7275</item> |
| <item>XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin</item> |
| <item>XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin</item> |
| <item>XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin</item> |
| <item>NTP_SERVER=north-america.pool.ntp.org</item> |
| <item>SUPL_MODE=1</item> |
| <item>SUPL_VER=0x20000</item> |
| <item>LPP_PROFILE=0</item> |
| <item>NMEA_PROVIDER=0</item> |
| <item>A_GLONASS_POS_PROTOCOL_SELECT=0</item> |
| <item>ERR_ESTIMATE=0</item> |
| <item>INTERMEDIATE_POS=0</item> |
| <item>SUPL_ES=0</item> |
| </string-array> |
| |
| <!-- Values for USB port setting. in format of bootmode:current function:new function --> |
| <string-array translatable="false" name="config_oemUsbModeOverride"> |
| <item>"hw-factory:mtp:manufacture,adb"</item> |
| <item>"hw-factory:mtp,adb:manufacture,adb"</item> |
| <item>"hw-factory:ptp:manufacture,adb"</item> |
| <item>"hw-factory:ptp,adb:manufacture,adb"</item> |
| <item>"hw-factory:rndis:manufacture,adb"</item> |
| <item>"hw-factory:rndis,adb:manufacture,adb"</item> |
| <item>"hw-factory:adb:manufacture,adb"</item> |
| <item>"bp-tools:mtp:diag,serial_smd,rmnet_ipa,adb"</item> |
| <item>"bp-tools:mtp,adb:diag,serial_smd,rmnet_ipa,adb"</item> |
| <item>"bp-tools:ptp:diag,serial_smd,rmnet_ipa,adb"</item> |
| <item>"bp-tools:ptp,adb:diag,serial_smd,rmnet_ipa,adb"</item> |
| <item>"bp-tools:adb:diag,serial_smd,rmnet_ipa,adb"</item> |
| <item>"bp-tools:rndis:rndis,serial,adb"</item> |
| <item>"bp-tools:rndis,adb:rndis,serial,adb"</item> |
| </string-array> |
| |
| <!-- Default list of files pinned by the Pinner Service --> |
| <string-array translatable="false" name="config_defaultPinnerServiceFiles"> |
| <item>"/system/framework/arm64/boot-framework.oat"</item> |
| <item>"/system/framework/boot-framework.vdex"</item> |
| <item>"/system/framework/oat/arm64/services.odex"</item> |
| <item>"/system/framework/oat/arm64/services.vdex"</item> |
| <item>"/system/framework/arm64/boot.oat"</item> |
| <item>"/system/framework/boot.vdex"</item> |
| <item>"/system/framework/arm64/boot-core-libart.oat"</item> |
| <item>"/system/framework/boot-core-libart.vdex"</item> |
| </string-array> |
| |
| <!-- Should the pinner service pin the Camera application? --> |
| <bool name="config_pinnerCameraApp">true</bool> |
| |
| <!-- Enable system navigation keys. --> |
| <bool name="config_supportSystemNavigationKeys">true</bool> |
| |
| <!-- If this is true, device supports Sustained Performance Mode. --> |
| <bool name="config_sustainedPerformanceModeSupported">true</bool> |
| |
| <!-- True if Unprocessed audio source supports the required frequency range and level --> |
| <bool name="config_supportAudioSourceUnprocessed">true</bool> |
| </resources> |