| ## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn54x) |
| ## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn54x) |
| |
| ############################################################################### |
| # Application options |
| # Logging Levels |
| # NXPLOG_DEFAULT_LOGLEVEL 0x01 |
| # ANDROID_LOG_DEBUG 0x03 |
| # ANDROID_LOG_WARN 0x02 |
| # ANDROID_LOG_ERROR 0x01 |
| # ANDROID_LOG_SILENT 0x00 |
| # |
| NXPLOG_EXTNS_LOGLEVEL=0x01 |
| NXPLOG_NCIHAL_LOGLEVEL=0x01 |
| NXPLOG_NCIX_LOGLEVEL=0x01 |
| NXPLOG_NCIR_LOGLEVEL=0x01 |
| NXPLOG_FWDNLD_LOGLEVEL=0x01 |
| NXPLOG_TML_LOGLEVEL=0x01 |
| |
| ############################################################################### |
| # Nfc Device Node name |
| NXP_NFC_DEV_NODE="/dev/pn551" |
| |
| ############################################################################### |
| # Extension for Mifare reader enable |
| MIFARE_READER_ENABLE=0x01 |
| |
| ############################################################################### |
| # Vzw Feature enable |
| VZW_FEATURE_ENABLE=0x01 |
| |
| ############################################################################### |
| # File name for Firmware |
| NXP_FW_NAME="libpn551_fw.so" |
| |
| ############################################################################### |
| # System clock source selection configuration |
| #define CLK_SRC_XTAL 1 |
| #define CLK_SRC_PLL 2 |
| |
| NXP_SYS_CLK_SRC_SEL=0x01 |
| |
| ############################################################################### |
| # System clock frequency selection configuration |
| #define CLK_FREQ_13MHZ 1 |
| #define CLK_FREQ_19_2MHZ 2 |
| #define CLK_FREQ_24MHZ 3 |
| #define CLK_FREQ_26MHZ 4 |
| #define CLK_FREQ_38_4MHZ 5 |
| #define CLK_FREQ_52MHZ 6 |
| |
| NXP_SYS_CLK_FREQ_SEL=0x01 |
| |
| ############################################################################### |
| # The timeout value to be used for clock request acknowledgment |
| # min value = 0x01 to max = 0x06 |
| |
| NXP_SYS_CLOCK_TO_CFG=0x06 |
| |
| ############################################################################### |
| # NXP proprietary settings |
| NXP_ACT_PROP_EXTN={2F, 02, 00} |
| |
| ############################################################################### |
| # NFC forum profile settings |
| NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} |
| |
| ############################################################################### |
| # NFCC Configuration Control |
| # Allow NFCC to manage RF Config 0x01 |
| # Don't allow NFCC to manage RF Config 0x00 |
| NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} |
| |
| ############################################################################### |
| # Standby enable settings |
| NXP_CORE_STANDBY={2F, 00, 01, 01} |
| |
| ############################################################################### |
| # NXP TVDD configurations settings |
| # Allow NFCC to configure External TVDD, There are currently three |
| #configurations (1, 2 and 3) are supported, out of them only one can be |
| #supported. |
| |
| NXP_EXT_TVDD_CFG=0x02 |
| |
| #config1:SLALM, 3.3V for both RM and CM |
| NXP_EXT_TVDD_CFG_1={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 02, 09, 00} |
| |
| #config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, |
| #monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms |
| NXP_EXT_TVDD_CFG_2={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 56, 40, 0A } |
| |
| ############################################################################### |
| # NXP RF ALMSL configuration settings for FW VERSION = 10.05.02 |
| # |
| # A0, 0D, 03, 00, 40, 01 RF_CLIF_CFG_BOOT CLIF_ANA_NFCLD_REG |
| # A0, 0D, 03, 04, 47, 02 RF_CLIF_CFG_INITIATOR CLIF_ANA_AGC_REG |
| # A0, 0D, 03, 06, 47, 02 RF_CLIF_CFG_TARGET CLIF_ANA_AGC_REG |
| # A0, 0D, 06, 06, 03, 00, 6D, 00, 20 RF_CLIF_CFG_TARGET CLIF_TRANSCEIVE_CONTROL_REG |
| # A0, 0D, 06, 06, 42, 00, 02, FF, FF RF_CLIF_CFG_TARGET CLIF_ANA_TX_AMPLITUDE_REG |
| # A0, 0D, 03, 06, 37, 08 RF_CLIF_CFG_TARGET CLIF_TX_CONTROL_REG |
| # A0, 0D, 06, 32, 42, F8, 10, FF, FF RF_CLIF_CFG_BR_106_I_TXA CLIF_ANA_TX_AMPLITUDE_REG |
| # A0, 0D, 06, 34, 2D, 24, 47, 0C, 00 RF_CLIF_CFG_BR_106_I_RXA_P CLIF_SIGPRO_RM_CONFIG1_REG |
| # A0, 0D, 04, 34, 44, 21, 00 RF_CLIF_CFG_BR_106_I_RXA_P CLIF_ANA_RX_REG |
| # A0, 0D, 04, 46, 44, 26, 00 RF_CLIF_CFG_BR_106_I_RXB CLIF_ANA_RX_REG |
| # A0, 0D, 06, 46, 2D, 15, 25, 0D, 00 RF_CLIF_CFG_BR_106_I_RXB CLIF_SIGPRO_RM_CONFIG1_REG |
| # A0, 0D, 06, 44, 42, 88, 10, FF, FF RF_CLIF_CFG_BR_106_I_TXB CLIF_ANA_TX_AMPLITUDE_REG |
| # A0, 0D, 06, 56, 2D, 05, 9E, 0C, 00 RF_CLIF_CFG_BR_212_I_RXF_P CLIF_SIGPRO_RM_CONFIG1_REG |
| # A0, 0D, 04, 56, 44, 22, 00 RF_CLIF_CFG_BR_212_I_RXF_P CLIF_ANA_RX_REG |
| # A0, 0D, 06, 5C, 2D, 05, 9E, 0C, 00 RF_CLIF_CFG_BR_424_I_RXF_P CLIF_SIGPRO_RM_CONFIG1_REG |
| # A0, 0D, 04, 5C, 44, 26, 00 RF_CLIF_CFG_BR_424_I_RXF_P CLIF_ANA_RX_REG |
| # A0, 0D, 06, 54, 42, 88, 10, FF, FF RF_CLIF_CFG_BR_212_I_TXF CLIF_ANA_TX_AMPLITUDE_REG |
| # A0, 0D, 06, 5A, 42, 90, 10, FF, FF RF_CLIF_CFG_BR_424_I_TXF CLIF_ANA_TX_AMPLITUDE_REG |
| # A0, 0D, 06, 98, 42, 00, 02, FF, FF RF_CLIF_CFG_GTM_B CLIF_ANA_TX_AMPLITUDE_REG |
| # A0, 0D, 06, 6C, 44, A3, 90, 03, 00 RF_CLIF_CFG_BR_106_T_RXA CLIF_ANA_RX_REG |
| # A0, 0D, 06, 7C, 44, A3, 90, 03, 00 RF_CLIF_CFG_BR_106_T_RXB CLIF_ANA_RX_REG |
| # A0, 0D, 06, 8E, 44, 12, 90, 03, 00 RF_CLIF_CFG_BR_212_T_RXF CLIF_ANA_RX_REG |
| # A0, 0D, 06, 94, 44, 12, 90, 03, 00 RF_CLIF_CFG_BR_424_T_RXF CLIF_ANA_RX_REG |
| # A0, 0D, 06, 24, 42, 00, 02, FF, FF RF_CLIF_CFG_TECHNO_T_TXA_P CLIF_ANA_TX_AMPLITUDE_REG |
| # *** ALMSL FW VERSION = 10.05.02 *** |
| NXP_RF_CONF_BLK_1={ |
| 20, 02, C5, 18, |
| A0, 0D, 03, 00, 40, 03, |
| A0, 0D, 03, 04, 47, 02, |
| A0, 0D, 03, 06, 47, 02, |
| A0, 0D, 06, 06, 03, 00, 6E, 00, 20, |
| A0, 0D, 06, 06, 42, 00, 00, F8, F8, |
| A0, 0D, 03, 06, 37, 08, |
| A0, 0D, 06, 32, 42, F8, 10, FF, FF, |
| A0, 0D, 06, 34, 2D, 24, 47, 0C, 00, |
| A0, 0D, 04, 34, 44, 21, 00, |
| A0, 0D, 04, 46, 44, 26, 00, |
| A0, 0D, 06, 46, 2D, 15, 25, 0D, 00, |
| A0, 0D, 06, 44, 42, 88, 10, FF, FF, |
| A0, 0D, 06, 56, 2D, 05, 5E, 0C, 00, |
| A0, 0D, 04, 56, 44, 21, 00, |
| A0, 0D, 06, 5C, 2D, 05, 9E, 0C, 00, |
| A0, 0D, 04, 5C, 44, 26, 00, |
| A0, 0D, 06, 54, 42, 88, 10, FF, FF, |
| A0, 0D, 06, 5A, 42, 90, 10, FF, FF, |
| A0, 0D, 06, 98, 42, 00, 00, F8, F8, |
| A0, 0D, 06, 6C, 44, A3, 90, 03, 00, |
| A0, 0D, 06, 7C, 44, A3, 90, 03, 00, |
| A0, 0D, 06, 8E, 44, 12, 90, 03, 00, |
| A0, 0D, 06, 94, 44, 12, 90, 03, 00, |
| A0, 0D, 06, 24, 42, 00, 00, F8, F8 |
| } |
| |
| ############################################################################### |
| # NXP RF configuration ALM/PLM settings |
| # This section needs to be updated with the correct values based on the platform |
| NXP_RF_CONF_BLK_2={ |
| 20, 02, 71, 03, |
| A0, 1D, 11, 53, 33, 14, 17, 00, AA, 85, 00, 80, 55, 2A, 04, 00, 63, 00, 00, 00, |
| A0, 1E, 11, 1B, 13, 14, 14, 00, 6F, 97, 00, 00, 00, 10, 04, 00, 63, 02, 00, 00, |
| A0, 92, 45, 23, 04, 50, 10, 00, 9B, 00, 14, 00, FF, 00, 00, 00, 4C, 81, 00, 00, FF, 83, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00 |
| } |
| |
| ############################################################################### |
| # NXP RF configuration ALM/PLM settings |
| # This section needs to be updated with the correct values based on the platform |
| NXP_RF_CONF_BLK_3={ |
| 20, 02, 2E, 05, |
| A0, 0D, 06, 00, 35, 50, 00, FF, 02, |
| A0, 0D, 06, 04, 35, F4, 01, F4, 01, |
| A0, 0D, 06, 06, 35, FF, 03, FF, 03, |
| A0, 0D, 06, 07, 35, FF, 01, FF, 02, |
| A0, 0D, 06, 10, 35, FF, 01, FF, 02 |
| } |
| |
| ############################################################################### |
| # NXP RF configuration ALM/PLM settings |
| # This section needs to be updated with the correct values based on the platform |
| #NXP_RF_CONF_BLK_4={ |
| #} |
| |
| ############################################################################### |
| # NXP RF configuration ALM/PLM settings |
| # This section needs to be updated with the correct values based on the platform |
| #NXP_RF_CONF_BLK_5={ |
| #} |
| |
| ############################################################################### |
| # NXP RF configuration ALM/PLM settings |
| # This section needs to be updated with the correct values based on the platform |
| #NXP_RF_CONF_BLK_6={ |
| #} |
| |
| ############################################################################### |
| ## Set configuration optimization decision setting |
| ## Enable = 0x01 |
| ## Disable = 0x00 |
| NXP_SET_CONFIG_ALWAYS=0x00 |
| |
| ############################################################################### |
| # Core configuration extensions |
| # It includes |
| # Wired mode settings A0ED, A0EE |
| # Tag Detector A040, A041, A043 |
| # Low Power mode A007 |
| # Clock settings A002, A003 |
| # PbF settings A008 |
| NXP_CORE_CONF_EXTN={20, 02, 29, 0A, |
| A0, 06, 01, 01, |
| A0, 07, 01, 02, |
| A0, EC, 01, 00, |
| A0, ED, 01, 00, |
| A0, 5E, 01, 01, |
| A0, 40, 01, 01, |
| A0, DD, 01, 2D, |
| A0, 96, 01, 01, |
| A0, 41, 01, 02, |
| A0, 43, 01, 00 |
| } |
| |
| ############################################################################### |
| # Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit |
| NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01 |
| } |
| ############################################################################### |
| # To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00 |
| NXP_I2C_FRAGMENTATION_ENABLED=0x00 |
| |
| ############################################################################### |
| # Core configuration settings |
| NXP_CORE_CONF={ 20, 02, 2A, 0E, |
| 28, 01, 00, |
| 21, 01, 00, |
| 30, 01, 08, |
| 31, 01, 03, |
| 32, 01, 60, |
| 38, 01, 01, |
| 33, 00, |
| 54, 01, 06, |
| 50, 01, 02, |
| 5B, 01, 00, |
| 80, 01, 01, |
| 81, 01, 01, |
| 82, 01, 0E, |
| 18, 01, 01 |
| } |
| |
| ############################################################################### |
| # Mifare Classic Key settings |
| #NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, |
| # A0, 52, 06, D3, F7, D3, F7, D3, F7, |
| # A0, 53, 06, FF, FF, FF, FF, FF, FF, |
| # A0, 54, 06, 00, 00, 00, 00, 00, 00} |
| |
| ############################################################################### |
| # Default SE Options |
| # No secure element 0x00 |
| # eSE 0x01 |
| # UICC 0x02 |
| |
| NXP_DEFAULT_SE=0x00 |
| |
| ############################################################################### |
| #Enable SWP full power mode when phone is power off |
| NXP_SWP_FULL_PWR_ON=0x00 |
| |
| ############################################################################### |
| #### Select the CHIP #### |
| #PN547C2 0x01 |
| #PN65T 0x02 |
| #PN548AD 0x03 |
| #PN66T 0x04 |
| #PN551 0x05 |
| #PN67T 0x06 |
| |
| NXP_NFC_CHIP=0x05 |
| ############################################################################### |
| # CE when Screen state is locked |
| # Disable 0x00 |
| # Enable 0x01 |
| NXP_CE_ROUTE_STRICT_DISABLE=0x01 |
| |
| #Timeout in secs to get NFCEE Discover notification |
| NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 |
| |
| NXP_DEFAULT_NFCEE_TIMEOUT=0x06 |
| |
| #Timeout in secs |
| NXP_SWP_RD_START_TIMEOUT=0x0A |
| |
| #Timeout in secs |
| NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 |
| |
| ############################################################################### |
| #Set the default AID route Location : |
| #This settings will be used when application does not set this parameter |
| # host 0x00 |
| # eSE 0x01 |
| # UICC 0x02 |
| DEFAULT_AID_ROUTE=0x00 |
| |
| ############################################################################### |
| #Set the Mifare Desfire route Location : |
| #This settings will be used when application does not set this parameter |
| # host 0x00 |
| # eSE 0x01 |
| # UICC 0x02 |
| DEFAULT_DESFIRE_ROUTE=0x00 |
| |
| ############################################################################### |
| #Set the Mifare CLT route Location : |
| #This settings will be used when application does not set this parameter |
| # host 0x00 |
| # eSE 0x01 |
| # UICC 0x02 |
| DEFAULT_MIFARE_CLT_ROUTE=0x00 |
| |
| ############################################################################### |
| #Set the default AID Power state : |
| #This settings will be used when application does not set this parameter |
| # bit pos 0 = Switch On |
| # bit pos 1 = Switch Off |
| # bit pos 2 = Battery Off |
| # bit pos 3 = Screen Lock |
| # bit pos 4 = Screen Off |
| DEFAULT_AID_PWR_STATE=0x19 |
| |
| ############################################################################### |
| #Set the Mifare Desfire Power state : |
| #This settings will be used when application does not set this parameter |
| # bit pos 0 = Switch On |
| # bit pos 1 = Switch Off |
| # bit pos 2 = Battery Off |
| # bit pos 3 = Screen Lock |
| # bit pos 4 = Screen Off |
| DEFAULT_DESFIRE_PWR_STATE=0x1B |
| |
| ############################################################################### |
| #Set the Mifare CLT Power state : |
| #This settings will be used when application does not set this parameter |
| # bit pos 0 = Switch On |
| # bit pos 1 = Switch Off |
| # bit pos 2 = Battery Off |
| # bit pos 3 = Screen Lock |
| # bit pos 4 = Screen Off |
| DEFAULT_MIFARE_CLT_PWR_STATE=0x1B |
| |
| ############################################################################### |
| # AID Matching platform options |
| # AID_MATCHING_L 0x01 |
| # AID_MATCHING_K 0x02 |
| AID_MATCHING_PLATFORM=0x01 |
| |
| ############################################################################### |
| #CHINA_TIANJIN_RF_SETTING |
| #Enable 0x01 |
| #Disable 0x00 |
| NXP_CHINA_TIANJIN_RF_ENABLED=0x01 |
| |
| ############################################################################### |
| #SWP_SWITCH_TIMEOUT_SETTING |
| # Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. |
| # Timeout in milliseconds, for example |
| # No Timeout 0x00 |
| # 10 millisecond timeout 0x0A |
| NXP_SWP_SWITCH_TIMEOUT=0x0A |
| |
| ############################################################################### |
| #Dynamic RSSI feature enable |
| # Disable 0x00 |
| # Enable 0x01 |
| NXP_AGC_DEBUG_ENABLE=0x00 |
| |
| ############################################################################### |
| #Config to allow adding aids |
| #NFC on/off is required after this config |
| #1 = enabling adding aid to NFCC routing table. |
| #0 = disabling adding aid to NFCC routing table. |
| NXP_ENABLE_ADD_AID=0x01 |
| |
| ############################################################################### |
| # Enable/Disable checking default proto SE Id |
| # Disable 0x00 |
| # Enable 0x01 |
| NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 |
