| # |
| # Copyright (C) 2017 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| PRODUCT_COPY_FILES += device/google/cuttlefish_kernel/4.4-x86_64/kernel:kernel |
| |
| PRODUCT_SHIPPING_API_LEVEL := 26 |
| |
| DISABLE_RILD_OEM_HOOK := true |
| |
| # Explanation of specific properties: |
| # debug.hwui.swap_with_damage avoids boot failure on M http://b/25152138 |
| # ro.opengles.version OpenGLES 2.0 |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| tombstoned.max_tombstone_count=500 \ |
| debug.hwui.swap_with_damage=0 \ |
| ro.adb.qemud=0 \ |
| ro.carrier=unknown \ |
| ro.com.android.dataroaming=false \ |
| ro.com.google.locationfeatures=1 \ |
| ro.hardware.virtual_device=1 \ |
| ro.logd.size=1M \ |
| ro.opengles.version=131072 \ |
| ro.ril.gprsclass=10 \ |
| ro.ril.hsxpa=1 \ |
| wifi.interface=wlan0 \ |
| |
| # Below is a list of properties we probably should get rid of. |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| wlan.driver.status=ok |
| |
| |
| # Default OMX service to non-Treble |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.media.treble_omx=false |
| |
| # Enable Perfetto traced |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.traced.enable=1 |
| |
| # |
| # Packages for various cuttlefish-specific tests |
| # |
| PRODUCT_PACKAGES += \ |
| vsoc_guest_region_e2e_test \ |
| vsoc_managed_region_e2e_test \ |
| vsoc_driver_test |
| |
| # |
| # Packages for various GCE-specific utilities |
| # |
| PRODUCT_PACKAGES += \ |
| audiotop \ |
| dhcpcd_wlan0 \ |
| gce_fs_monitor \ |
| socket_forward_proxy \ |
| usbforward \ |
| VSoCService \ |
| wpa_supplicant.vsoc.conf \ |
| vsoc_input_service \ |
| vport_trigger \ |
| rename_netiface \ |
| ip_link_add \ |
| |
| # |
| # Packages for AOSP-available stuff we use from the framework |
| # |
| PRODUCT_PACKAGES += \ |
| dhcpcd-6.8.2 \ |
| dhcpcd-6.8.2.conf \ |
| e2fsck \ |
| ip \ |
| network \ |
| perf \ |
| scp \ |
| sleep \ |
| tcpdump \ |
| wpa_supplicant \ |
| wificond \ |
| |
| # |
| # Packages for the OpenGL implementation |
| # |
| |
| # Placeholder to ensure that /vendor/lib/egl exists |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/README_egl.md:$(TARGET_COPY_OUT_VENDOR)/lib/egl/README.md |
| |
| # Guest side SwiftShader |
| PRODUCT_PACKAGES += \ |
| libEGL_swiftshader \ |
| libGLESv1_CM_swiftshader \ |
| libGLESv2_swiftshader |
| |
| # The locking_wrapper puts a lock around all of the SwiftShader entry points to |
| # serialize all access to the library, reducing the chances for races. |
| # Applies only to guest-side SwiftShader |
| PRODUCT_PACKAGES += \ |
| libEGL_locking_wrapper \ |
| libGLESv1_CM_locking_wrapper \ |
| libGLESv2_locking_wrapper |
| |
| # GLES encoder, reused from goldfish |
| PRODUCT_PACKAGES += \ |
| libEGL_emulation \ |
| libGLESv1_CM_emulation \ |
| libGLESv2_emulation \ |
| |
| DEVICE_PACKAGE_OVERLAYS := device/google/cuttlefish/shared/overlay |
| PRODUCT_AAPT_CONFIG := normal large xlarge hdpi xhdpi |
| # PRODUCT_AAPT_PREF_CONFIG is intentionally not set to pick up every density resources. |
| |
| # |
| # General files |
| # |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \ |
| device/google/cuttlefish/shared/config/camera_v3.json:$(TARGET_COPY_OUT_VENDOR)/etc/config/camera.json \ |
| device/google/cuttlefish/shared/config/init.vsoc.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.vsoc.rc \ |
| device/google/cuttlefish/shared/config/ueventd.vsoc.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/ueventd.vsoc.rc \ |
| device/google/cuttlefish/shared/config/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \ |
| device/google/cuttlefish/shared/config/media_codecs_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance.xml \ |
| device/google/cuttlefish/shared/config/media_profiles.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml \ |
| frameworks/av/media/libeffects/data/audio_effects.conf:system/etc/audio_effects.conf \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \ |
| frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \ |
| frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \ |
| frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \ |
| frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml \ |
| frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \ |
| frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \ |
| frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.xml \ |
| frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml \ |
| frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \ |
| frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml \ |
| frameworks/native/data/etc/android.hardware.ethernet.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.ethernet.xml \ |
| frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \ |
| frameworks/native/data/etc/android.hardware.touchscreen.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.xml \ |
| frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \ |
| frameworks/native/data/etc/android.software.app_widgets.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.app_widgets.xml \ |
| system/bt/vendor_libs/test_vendor_lib/data/controller_properties.json:system/etc/bluetooth/controller_properties.json \ |
| |
| |
| # |
| # The fstab requires special handling. For system-as-root builds, we *must* |
| # retrieve the vendor partition mount options from DTB, as system must be |
| # "pristine" to support GSI. For builds with an initrd, we prefer not to |
| # rely on DTB, and *must* retrieve the partition mount options from an fstab |
| # in the initrd instead. (In either case, the fstab *must also* be installed to |
| # /vendor/etc) |
| # |
| ifeq ($(TARGET_BUILD_SYSTEM_ROOT_IMAGE),true) |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/fstab.dtb:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.vsoc \ |
| |
| else |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/fstab.initrd:$(TARGET_COPY_OUT_RAMDISK)/fstab.vsoc \ |
| device/google/cuttlefish/shared/config/fstab.initrd:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.vsoc \ |
| |
| endif |
| |
| |
| # |
| # USB Specific |
| # |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/init.hardware.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.vsoc.usb.rc |
| |
| # Packages for HAL implementations |
| |
| # |
| # Atrace HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.atrace@1.0-service |
| |
| # |
| # Hardware Composer HAL |
| # |
| PRODUCT_PACKAGES += \ |
| hwcomposer.drm \ |
| hwcomposer.vsoc \ |
| hwcomposer-stats \ |
| android.hardware.graphics.composer@2.1-impl \ |
| android.hardware.graphics.composer@2.1-service |
| |
| # |
| # Gralloc HAL |
| # |
| PRODUCT_PACKAGES += \ |
| gralloc.minigbm \ |
| gralloc.vsoc \ |
| android.hardware.graphics.mapper@2.0-impl \ |
| android.hardware.graphics.allocator@2.0-impl \ |
| android.hardware.graphics.allocator@2.0-service |
| |
| # |
| # Bluetooth HAL and Compatibility Bluetooth library (for older revs). |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.bluetooth@1.0-service.sim \ |
| |
| # |
| # Audio HAL |
| # |
| PRODUCT_PACKAGES += \ |
| audio.primary.vsoc \ |
| android.hardware.audio@4.0-impl \ |
| android.hardware.audio.effect@4.0-impl \ |
| android.hardware.audio@2.0-service |
| |
| # |
| # Drm HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.drm@1.0-impl \ |
| android.hardware.drm@1.0-service |
| |
| # |
| # Dumpstate HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.dumpstate@1.0-service.cuttlefish |
| |
| # |
| # Camera |
| # |
| PRODUCT_PACKAGES += \ |
| camera.vsoc \ |
| camera.vsoc.jpeg \ |
| camera.device@3.2-impl \ |
| android.hardware.camera.provider@2.4-impl \ |
| android.hardware.camera.provider@2.4-service |
| |
| # |
| # Gatekeeper |
| # |
| PRODUCT_PACKAGES += \ |
| gatekeeper.vsoc \ |
| android.hardware.gatekeeper@1.0-impl \ |
| android.hardware.gatekeeper@1.0-service |
| |
| # |
| # GPS |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.gnss@2.0-service |
| |
| # Health |
| PRODUCT_PACKAGES += \ |
| android.hardware.health@2.0-service.cuttlefish |
| |
| # Health Storage |
| PRODUCT_PACKAGES += \ |
| android.hardware.health.storage@1.0-service.cuttlefish |
| |
| # |
| # Sensors |
| # |
| PRODUCT_PACKAGES += \ |
| sensors.vsoc \ |
| android.hardware.sensors@1.0-impl \ |
| android.hardware.sensors@1.0-service |
| # |
| # Thermal (mock) |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.thermal@2.0-service |
| |
| # |
| # Lights |
| # |
| PRODUCT_PACKAGES += \ |
| lights.vsoc \ |
| android.hardware.light@2.0-impl \ |
| android.hardware.light@2.0-service |
| |
| # |
| # Keymaster HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.keymaster@3.0-impl \ |
| android.hardware.keymaster@3.0-service |
| |
| # |
| # Power HAL |
| # |
| PRODUCT_PACKAGES += \ |
| power.vsoc \ |
| android.hardware.power@1.0-impl \ |
| android.hardware.power@1.0-service |
| |
| # |
| # USB |
| PRODUCT_PACKAGES += \ |
| android.hardware.usb@1.0-service |
| |
| # TODO vibrator HAL |
| |
| PRODUCT_PACKAGES += \ |
| cuttlefish_dtb |
| |
| # WLAN driver configuration files |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf |
