| # |
| # Copyright (C) 2017 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # Include all languages |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk) |
| |
| # Enable updating of APEXes |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/updatable_apex.mk) |
| |
| # Enable userspace reboot |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/userspace_reboot.mk) |
| |
| # Enforce generic ramdisk allow list |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/generic_ramdisk.mk) |
| |
| # Set Vendor SPL to match platform |
| VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH) |
| |
| # Set boot SPL |
| BOOT_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH) |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.boot_security_patch=$(BOOT_SECURITY_PATCH) |
| |
| PRODUCT_SOONG_NAMESPACES += device/generic/goldfish # for audio and wifi |
| |
| PRODUCT_SHIPPING_API_LEVEL := 35 |
| PRODUCT_USE_DYNAMIC_PARTITIONS := true |
| DISABLE_RILD_OEM_HOOK := true |
| |
| # TODO(b/205788876) remove this condition when openwrt has an image for arm. |
| ifndef PRODUCT_ENFORCE_MAC80211_HWSIM |
| PRODUCT_ENFORCE_MAC80211_HWSIM := true |
| endif |
| |
| PRODUCT_SET_DEBUGFS_RESTRICTIONS := true |
| |
| PRODUCT_FS_COMPRESSION := 1 |
| TARGET_RO_FILE_SYSTEM_TYPE ?= erofs |
| TARGET_USERDATAIMAGE_FILE_SYSTEM_TYPE ?= f2fs |
| TARGET_USERDATAIMAGE_PARTITION_SIZE ?= 8589934592 |
| |
| TARGET_VULKAN_SUPPORT ?= true |
| |
| # Enable Virtual A/B |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota/android_t_baseline.mk) |
| PRODUCT_VIRTUAL_AB_COMPRESSION_METHOD := gz |
| |
| PRODUCT_VENDOR_PROPERTIES += ro.virtual_ab.compression.threads=true |
| PRODUCT_VENDOR_PROPERTIES += ro.virtual_ab.batch_writes=true |
| |
| # Enable Scoped Storage related |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk) |
| |
| # Properties that are not vendor-specific. These will go in the product |
| # partition, instead of the vendor partition, and do not need vendor |
| # sepolicy |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| remote_provisioning.hostname=staging-remoteprovisioning.sandbox.googleapis.com \ |
| persist.adb.tcp.port=5555 \ |
| ro.com.google.locationfeatures=1 \ |
| persist.sys.fuse.passthrough.enable=true \ |
| persist.sys.fuse.bpf.enable=false \ |
| remote_provisioning.tee.rkp_only=1 \ |
| |
| # Until we support adb keys on user builds, and fix logcat over serial, |
| # spawn adbd by default without authorization for "adb logcat" |
| ifeq ($(TARGET_BUILD_VARIANT),user) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.adb.secure=0 \ |
| ro.debuggable=1 |
| endif |
| |
| # Explanation of specific properties: |
| # ro.hardware.keystore_desede=true needed for CtsKeystoreTestCases |
| PRODUCT_VENDOR_PROPERTIES += \ |
| tombstoned.max_tombstone_count=500 \ |
| ro.carrier=unknown \ |
| ro.com.android.dataroaming?=false \ |
| ro.hardware.virtual_device=1 \ |
| ro.logd.size=1M \ |
| wifi.interface=wlan0 \ |
| wifi.direct.interface=p2p-dev-wlan0 \ |
| persist.sys.zram_enabled=1 \ |
| ro.hardware.keystore_desede=true \ |
| ro.rebootescrow.device=/dev/block/pmem0 \ |
| ro.incremental.enable=1 \ |
| debug.c2.use_dmabufheaps=1 |
| |
| # Below is a list of properties we probably should get rid of. |
| PRODUCT_VENDOR_PROPERTIES += \ |
| wlan.driver.status=ok |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| debug.stagefright.c2inputsurface=-1 |
| |
| # Enforce privapp permissions control. |
| PRODUCT_VENDOR_PROPERTIES += ro.control_privapp_permissions?=enforce |
| |
| # Copy preopted files from system_b on first boot |
| PRODUCT_VENDOR_PROPERTIES += ro.cp_system_other_odex=1 |
| |
| AB_OTA_POSTINSTALL_CONFIG += \ |
| RUN_POSTINSTALL_system=true \ |
| POSTINSTALL_PATH_system=system/bin/otapreopt_script \ |
| FILESYSTEM_TYPE_system=erofs \ |
| POSTINSTALL_OPTIONAL_system=true |
| |
| AB_OTA_POSTINSTALL_CONFIG += \ |
| RUN_POSTINSTALL_vendor=true \ |
| POSTINSTALL_PATH_vendor=bin/checkpoint_gc \ |
| FILESYSTEM_TYPE_vendor=erofs \ |
| POSTINSTALL_OPTIONAL_vendor=true |
| |
| # Userdata Checkpointing OTA GC |
| PRODUCT_PACKAGES += \ |
| checkpoint_gc |
| |
| # DRM service opt-in |
| PRODUCT_VENDOR_PROPERTIES += drm.service.enabled=true |
| |
| # Call deleteAllKeys if vold detects a factory reset |
| PRODUCT_VENDOR_PROPERTIES += ro.crypto.metadata_init_delete_all_keys.enabled=true |
| |
| # |
| # Packages for various GCE-specific utilities |
| # |
| PRODUCT_PACKAGES += \ |
| CuttlefishService \ |
| cuttlefish_sensor_injection \ |
| socket_vsock_proxy \ |
| tombstone_transmit \ |
| tombstone_producer \ |
| suspend_blocker \ |
| metrics_helper \ |
| |
| $(call soong_config_append,cvd,launch_configs,cvd_config_auto.json cvd_config_foldable.json cvd_config_go.json cvd_config_phone.json cvd_config_slim.json cvd_config_tablet.json cvd_config_tv.json cvd_config_wear.json) |
| $(call soong_config_append,cvd,grub_config,grub.cfg) |
| |
| # |
| # Packages for AOSP-available stuff we use from the framework |
| # |
| PRODUCT_PACKAGES += \ |
| e2fsck \ |
| ip \ |
| sleep \ |
| tcpdump \ |
| wificond \ |
| |
| # |
| # Packages for testing |
| # |
| PRODUCT_PACKAGES += \ |
| aidl_lazy_test_server \ |
| aidl_lazy_cb_test_server \ |
| hidl_lazy_test_server \ |
| hidl_lazy_cb_test_server |
| |
| # Runtime Resource Overlays |
| ifneq ($(LOCAL_PREFER_VENDOR_APEX),true) |
| PRODUCT_PACKAGES += \ |
| cuttlefish_overlay_connectivity \ |
| cuttlefish_overlay_frameworks_base_core \ |
| cuttlefish_overlay_settings_provider |
| |
| endif |
| |
| # PRODUCT_AAPT_CONFIG and PRODUCT_AAPT_PREF_CONFIG are intentionally not set to |
| # pick up every density resources. |
| |
| # |
| # Common manifest for all targets |
| # |
| LOCAL_DEVICE_FCM_MANIFEST_FILE ?= device/google/cuttlefish/shared/config/manifest.xml |
| DEVICE_MANIFEST_FILE += $(LOCAL_DEVICE_FCM_MANIFEST_FILE) |
| |
| # |
| # General files |
| # |
| |
| |
| ifneq ($(LOCAL_SENSOR_FILE_OVERRIDES),true) |
| ifneq ($(LOCAL_PREFER_VENDOR_APEX),true) |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.sensor.ambient_temperature.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.ambient_temperature.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.hinge_angle.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hinge_angle.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \ |
| frameworks/native/data/etc/android.hardware.sensor.relative_humidity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.relative_humidity.xml |
| endif |
| endif |
| |
| ifneq ($(LOCAL_PREFER_VENDOR_APEX),true) |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/permissions/cuttlefish_excluded_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/cuttlefish_excluded_hardware.xml \ |
| frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml \ |
| frameworks/native/data/etc/android.hardware.ethernet.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.ethernet.xml \ |
| frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \ |
| frameworks/native/data/etc/android.hardware.reboot_escrow.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.reboot_escrow.xml \ |
| frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \ |
| frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \ |
| frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \ |
| frameworks/native/data/etc/android.software.ipsec_tunnels.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.ipsec_tunnels.xml \ |
| frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.verified_boot.xml |
| |
| endif |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/init.vendor.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.cutf_cvm.rc \ |
| device/google/cuttlefish/shared/config/init.product.rc:$(TARGET_COPY_OUT_PRODUCT)/etc/init/init.rc \ |
| device/google/cuttlefish/shared/config/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/etc/ueventd.rc \ |
| device/google/cuttlefish/shared/config/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \ |
| device/google/cuttlefish/shared/config/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \ |
| device/google/cuttlefish/shared/config/media_codecs_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance.xml \ |
| device/google/cuttlefish/shared/config/media_profiles.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml \ |
| device/google/cuttlefish/shared/config/media_profiles.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_vendor.xml \ |
| device/google/cuttlefish/shared/permissions/privapp-permissions-cuttlefish.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/privapp-permissions-cuttlefish.xml \ |
| frameworks/av/media/libeffects/data/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \ |
| hardware/interfaces/audio/aidl/default/audio_effects_config.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects_config.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \ |
| frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \ |
| frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \ |
| frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \ |
| frameworks/av/services/audiopolicy/config/surround_sound_configuration_5_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/surround_sound_configuration_5_0.xml \ |
| device/google/cuttlefish/shared/config/task_profiles.json:$(TARGET_COPY_OUT_VENDOR)/etc/task_profiles.json \ |
| |
| ifeq ($(LOCAL_PREFER_VENDOR_APEX),true) |
| PRODUCT_PACKAGES += com.google.cf.input.config |
| else |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/input/Crosvm_Virtio_Multitouch_Touchscreen_0.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/Crosvm_Virtio_Multitouch_Touchscreen_0.idc \ |
| device/google/cuttlefish/shared/config/input/Crosvm_Virtio_Multitouch_Touchscreen_1.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/Crosvm_Virtio_Multitouch_Touchscreen_1.idc \ |
| device/google/cuttlefish/shared/config/input/Crosvm_Virtio_Multitouch_Touchscreen_2.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/Crosvm_Virtio_Multitouch_Touchscreen_2.idc \ |
| device/google/cuttlefish/shared/config/input/Crosvm_Virtio_Multitouch_Touchscreen_3.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/Crosvm_Virtio_Multitouch_Touchscreen_3.idc \ |
| device/google/cuttlefish/shared/config/input/Crosvm_Virtio_Rotary_0.idc:$(TARGET_COPY_OUT_VENDOR)/usr/idc/Crosvm_Virtio_Rotary_0.idc \ |
| |
| endif |
| |
| PRODUCT_PACKAGES += \ |
| fstab.cf.f2fs.hctr2 \ |
| fstab.cf.f2fs.hctr2.vendor_ramdisk \ |
| fstab.cf.f2fs.cts \ |
| fstab.cf.f2fs.cts.vendor_ramdisk \ |
| fstab.cf.ext4.hctr2 \ |
| fstab.cf.ext4.hctr2.vendor_ramdisk \ |
| fstab.cf.ext4.cts \ |
| fstab.cf.ext4.cts.vendor_ramdisk \ |
| |
| # Packages for HAL implementations |
| |
| # |
| # Weaver aidl HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.weaver-service.example |
| |
| |
| # |
| # Authsecret HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.authsecret@1.0-service |
| |
| # |
| # Authsecret AIDL HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.authsecret-service.example |
| |
| # |
| # Audio HAL |
| # Note: aidl services are loaded, however they are not fully functional yet, |
| # and are not used by the framework, only by VTS tests. |
| # |
| ifndef LOCAL_AUDIO_PRODUCT_PACKAGE |
| LOCAL_AUDIO_PRODUCT_PACKAGE := \ |
| android.hardware.audio.service \ |
| android.hardware.audio@7.1-impl.ranchu \ |
| android.hardware.audio.effect@7.0-impl \ |
| android.hardware.audio.service-aidl.example \ |
| android.hardware.audio.effect.service-aidl.example \ |
| libaecsw \ |
| libagc1sw \ |
| libagc2sw \ |
| libbassboostsw \ |
| libbundleaidl \ |
| libdownmixaidl \ |
| libdynamicsprocessingaidl \ |
| libenvreverbsw \ |
| libequalizersw \ |
| libextensioneffect \ |
| libhapticgeneratoraidl \ |
| libloudnessenhanceraidl \ |
| libnssw \ |
| libpreprocessingaidl \ |
| libpresetreverbsw \ |
| libreverbaidl \ |
| libtinyxml2 \ |
| libvirtualizersw \ |
| libvisualizeraidl \ |
| libvolumesw |
| DEVICE_MANIFEST_FILE += \ |
| device/google/cuttlefish/guest/hals/audio/effects/manifest.xml |
| endif |
| |
| ifndef LOCAL_AUDIO_PRODUCT_COPY_FILES |
| LOCAL_AUDIO_PRODUCT_COPY_FILES := \ |
| device/generic/goldfish/audio/policy/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \ |
| device/generic/goldfish/audio/policy/primary_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/primary_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \ |
| frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \ |
| frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \ |
| frameworks/av/media/libeffects/data/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \ |
| hardware/interfaces/audio/aidl/default/audio_effects_config.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects_config.xml |
| endif |
| |
| PRODUCT_PACKAGES += $(LOCAL_AUDIO_PRODUCT_PACKAGE) |
| PRODUCT_COPY_FILES += $(LOCAL_AUDIO_PRODUCT_COPY_FILES) |
| DEVICE_PACKAGE_OVERLAYS += $(LOCAL_AUDIO_DEVICE_PACKAGE_OVERLAYS) |
| |
| # |
| # BiometricsFingerprint HAL (AIDL) |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.biometrics.fingerprint-service.example |
| |
| # |
| # Contexthub HAL |
| # |
| LOCAL_CONTEXTHUB_PRODUCT_PACKAGE ?= \ |
| android.hardware.contexthub-service.example |
| PRODUCT_PACKAGES += $(LOCAL_CONTEXTHUB_PRODUCT_PACKAGE) |
| |
| # |
| # Drm HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.drm@latest-service.clearkey \ |
| android.hardware.drm@latest-service.widevine |
| |
| # |
| # Confirmation UI HAL |
| # |
| ifeq ($(LOCAL_CONFIRMATIONUI_PRODUCT_PACKAGE),) |
| LOCAL_CONFIRMATIONUI_PRODUCT_PACKAGE := android.hardware.confirmationui-service.cuttlefish |
| endif |
| PRODUCT_PACKAGES += $(LOCAL_CONFIRMATIONUI_PRODUCT_PACKAGE) |
| |
| # |
| # Dumpstate HAL |
| # |
| ifeq ($(LOCAL_DUMPSTATE_PRODUCT_PACKAGE),) |
| LOCAL_DUMPSTATE_PRODUCT_PACKAGE += android.hardware.dumpstate-service.example |
| endif |
| PRODUCT_PACKAGES += $(LOCAL_DUMPSTATE_PRODUCT_PACKAGE) |
| |
| # |
| # Gatekeeper |
| # |
| ifeq ($(LOCAL_GATEKEEPER_PRODUCT_PACKAGE),) |
| LOCAL_GATEKEEPER_PRODUCT_PACKAGE := android.hardware.gatekeeper-service.remote |
| endif |
| PRODUCT_PACKAGES += \ |
| $(LOCAL_GATEKEEPER_PRODUCT_PACKAGE) |
| |
| # |
| # Oemlock |
| # |
| LOCAL_ENABLE_OEMLOCK ?= true |
| ifeq ($(LOCAL_ENABLE_OEMLOCK),true) |
| ifeq ($(LOCAL_OEMLOCK_PRODUCT_PACKAGE),) |
| LOCAL_OEMLOCK_PRODUCT_PACKAGE := android.hardware.oemlock-service.remote |
| endif |
| PRODUCT_PACKAGES += \ |
| $(LOCAL_OEMLOCK_PRODUCT_PACKAGE) |
| |
| PRODUCT_VENDOR_PROPERTIES += ro.oem_unlock_supported=1 |
| endif |
| |
| # |
| # GPS |
| # |
| LOCAL_GNSS_PRODUCT_PACKAGE ?= \ |
| android.hardware.gnss-service.example |
| |
| PRODUCT_PACKAGES += $(LOCAL_GNSS_PRODUCT_PACKAGE) |
| |
| # Health |
| ifeq ($(LOCAL_HEALTH_PRODUCT_PACKAGE),) |
| LOCAL_HEALTH_PRODUCT_PACKAGE := \ |
| android.hardware.health-service.cuttlefish \ |
| android.hardware.health-service.cuttlefish_recovery \ |
| |
| endif |
| PRODUCT_PACKAGES += $(LOCAL_HEALTH_PRODUCT_PACKAGE) |
| |
| # Health Storage |
| PRODUCT_PACKAGES += \ |
| android.hardware.health.storage-service.cuttlefish |
| |
| # Identity Credential |
| PRODUCT_PACKAGES += \ |
| android.hardware.identity-service.remote |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.input.processor-service.example |
| |
| # Netlink Interceptor HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.net.nlinterceptor-service.default |
| |
| # |
| # Sensors |
| # |
| ifeq ($(LOCAL_SENSOR_PRODUCT_PACKAGE),) |
| ifeq ($(LOCAL_PREFER_VENDOR_APEX),true) |
| LOCAL_SENSOR_PRODUCT_PACKAGE := com.android.hardware.sensors |
| else |
| LOCAL_SENSOR_PRODUCT_PACKAGE := android.hardware.sensors-service.example |
| endif |
| endif |
| PRODUCT_PACKAGES += \ |
| $(LOCAL_SENSOR_PRODUCT_PACKAGE) |
| |
| # |
| # Lights |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.lights-service.example \ |
| |
| # |
| # KeyMint HAL |
| # |
| ifeq ($(LOCAL_KEYMINT_PRODUCT_PACKAGE),) |
| LOCAL_KEYMINT_PRODUCT_PACKAGE := android.hardware.security.keymint-service.rust |
| endif |
| |
| PRODUCT_PACKAGES += \ |
| $(LOCAL_KEYMINT_PRODUCT_PACKAGE) \ |
| |
| # Indicate that KeyMint includes support for the ATTEST_KEY key purpose. |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.keystore.app_attest_key.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.keystore.app_attest_key.xml |
| |
| # |
| # Power and PowerStats HALs |
| # |
| ifeq ($(LOCAL_PREFER_VENDOR_APEX),true) |
| PRODUCT_PACKAGES += com.android.hardware.power |
| else |
| PRODUCT_PACKAGES += \ |
| android.hardware.power-service.example \ |
| android.hardware.power.stats-service.example \ |
| |
| endif |
| |
| # |
| # Tetheroffload HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.tetheroffload-service.example |
| |
| # |
| # Thermal HAL |
| # |
| LOCAL_THERMAL_HAL_PRODUCT_PACKAGE ?= android.hardware.thermal-service.example |
| PRODUCT_PACKAGES += $(LOCAL_THERMAL_HAL_PRODUCT_PACKAGE) |
| |
| # |
| # NeuralNetworks HAL |
| # |
| PRODUCT_PACKAGES += \ |
| android.hardware.neuralnetworks-service-sample-all \ |
| android.hardware.neuralnetworks-service-sample-limited \ |
| android.hardware.neuralnetworks-shim-service-sample |
| |
| # USB |
| PRODUCT_PACKAGES += \ |
| com.android.hardware.usb |
| |
| # Vibrator HAL |
| ifeq ($(LOCAL_PREFER_VENDOR_APEX),true) |
| PRODUCT_PACKAGES += com.android.hardware.vibrator |
| else |
| PRODUCT_PACKAGES += \ |
| android.hardware.vibrator-service.example |
| endif |
| |
| PRODUCT_PACKAGES += \ |
| android.hardware.secure_element-service.example |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml |
| |
| # BootControl HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.boot-service.default \ |
| android.hardware.boot-service.default_recovery |
| |
| |
| # RebootEscrow HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.rebootescrow-service.default |
| |
| # Memtrack HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.memtrack-service.example |
| |
| # Fastboot HAL & fastbootd |
| PRODUCT_PACKAGES += \ |
| android.hardware.fastboot@1.1-impl-mock \ |
| fastbootd |
| |
| # Recovery mode |
| ifneq ($(TARGET_NO_RECOVERY),true) |
| |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/init.recovery.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.cutf_cvm.rc \ |
| device/google/cuttlefish/shared/config/cgroups.json:$(TARGET_COPY_OUT_RECOVERY)/root/vendor/etc/cgroups.json \ |
| device/google/cuttlefish/shared/config/ueventd.rc:$(TARGET_COPY_OUT_RECOVERY)/root/ueventd.cutf_cvm.rc \ |
| |
| PRODUCT_PACKAGES += \ |
| update_engine_sideload |
| |
| endif |
| |
| ifdef TARGET_DEDICATED_RECOVERY |
| PRODUCT_BUILD_RECOVERY_IMAGE := true |
| PRODUCT_PACKAGES += linker.vendor_ramdisk shell_and_utilities_vendor_ramdisk |
| else |
| PRODUCT_PACKAGES += linker.recovery shell_and_utilities_recovery |
| endif |
| |
| # wifi |
| ifeq ($(LOCAL_PREFER_VENDOR_APEX),true) |
| # Add com.android.hardware.wifi for android.hardware.wifi-service |
| PRODUCT_PACKAGES += com.android.hardware.wifi |
| # Add com.google.cf.wifi for hostapd, wpa_supplicant, etc. |
| PRODUCT_PACKAGES += com.google.cf.wifi |
| $(call add_soong_config_namespace, wpa_supplicant) |
| $(call add_soong_config_var_value, wpa_supplicant, platform_version, $(PLATFORM_VERSION)) |
| $(call add_soong_config_var_value, wpa_supplicant, nl80211_driver, CONFIG_DRIVER_NL80211_QCA) |
| |
| else |
| PRODUCT_PACKAGES += \ |
| rename_netiface \ |
| wpa_supplicant \ |
| setup_wifi \ |
| mac80211_create_radios \ |
| hostapd \ |
| android.hardware.wifi@1.0-service \ |
| init.wifi |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/wpa_supplicant.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/wpa_supplicant.rc |
| |
| # VirtWifi interface configuration |
| ifeq ($(DEVICE_VIRTWIFI_PORT),) |
| DEVICE_VIRTWIFI_PORT := eth2 |
| endif |
| PRODUCT_VENDOR_PROPERTIES += ro.vendor.virtwifi.port=${DEVICE_VIRTWIFI_PORT} |
| |
| # WLAN driver configuration files |
| ifndef LOCAL_WPA_SUPPLICANT_OVERLAY |
| LOCAL_WPA_SUPPLICANT_OVERLAY := $(LOCAL_PATH)/config/wpa_supplicant_overlay.conf |
| endif |
| |
| ifndef LOCAL_P2P_SUPPLICANT |
| LOCAL_P2P_SUPPLICANT := $(LOCAL_PATH)/config/p2p_supplicant.conf |
| endif |
| |
| PRODUCT_COPY_FILES += \ |
| external/wpa_supplicant_8/wpa_supplicant/wpa_supplicant_template.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant.conf \ |
| $(LOCAL_WPA_SUPPLICANT_OVERLAY):$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \ |
| $(LOCAL_P2P_SUPPLICANT):$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant.conf |
| endif |
| |
| # Wifi Runtime Resource Overlay |
| PRODUCT_PACKAGES += \ |
| CuttlefishTetheringOverlay \ |
| CuttlefishWifiOverlay |
| |
| ifeq ($(PRODUCT_ENFORCE_MAC80211_HWSIM),true) |
| PRODUCT_VENDOR_PROPERTIES += ro.vendor.wifi_impl=mac8011_hwsim_virtio |
| $(call soong_config_append,cvdhost,enforce_mac80211_hwsim,true) |
| else |
| PRODUCT_VENDOR_PROPERTIES += ro.vendor.wifi_impl=virt_wifi |
| endif |
| |
| # UWB HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.uwb-service |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/guest/hals/uwb/uwb-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/uwb-service.rc |
| |
| |
| # Host packages to install |
| PRODUCT_HOST_PACKAGES += socket_vsock_proxy |
| |
| #for Confirmation UI |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/common/proprietary/confirmatioui_hal |
| |
| # Need this so that the application's loop on reading input can be synchronized |
| # with HW VSYNC |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.surface_flinger.running_without_sync_framework=true |
| |
| # Enable GPU-intensive background blur support on Cuttlefish when requested by apps |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.surface_flinger.supports_background_blur=1 |
| |
| # Disable GPU-intensive background blur for widget picker |
| PRODUCT_SYSTEM_PROPERTIES += \ |
| ro.launcher.depth.widget=0 |
| |
| # Vendor Dlkm Locader |
| PRODUCT_PACKAGES += \ |
| dlkm_loader |
| |
| # NFC AIDL HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.nfc-service.cuttlefish |
| |
| # CAS AIDL HAL |
| PRODUCT_PACKAGES += \ |
| android.hardware.cas-service.example |
| |
| PRODUCT_COPY_FILES += \ |
| device/google/cuttlefish/shared/config/pci.ids:$(TARGET_COPY_OUT_VENDOR)/pci.ids |
