| # Sample file for use for on device debug override only |
| # Prefer frameworks/base/core/res/res/values/config.xml and |
| # frameworks/base/core/res/res/values-mcc*-mnc*/config.xml |
| |
| ################################ |
| ##### AGPS server settings ##### |
| ################################ |
| # FOR SUPL SUPPORT, set the following |
| # SUPL_HOST=supl.google.com or IP |
| # SUPL_PORT=7275 |
| |
| # supl version 2.0 |
| # SUPL_VER=0x20000 |
| |
| #SUPL_MODE is a bit mask set in config.xml per carrier by default. |
| #If it is uncommented here, this value will overwrite the value from |
| #config.xml. |
| #MSA=0X2 |
| #MSB=0X1 |
| #SUPL_MODE=1 |
| |
| # Emergency SUPL, 1=enable, 0=disable |
| #SUPL_ES=0 |
| |
| #Choose PDN for Emergency SUPL |
| #1 - Use emergency PDN |
| #0 - Use regular SUPL PDN for Emergency SUPL |
| #USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 |
| |
| #################################### |
| # LTE Positioning Profile Settings |
| #################################### |
| # 0: Enable RRLP on LTE(Default) |
| # 1: Enable LPP_User_Plane on LTE |
| # 2: Enable LPP_Control_Plane |
| # 3: Enable both LPP_User_Plane and LPP_Control_Plane |
| #LPP_PROFILE = 2 |
| |
| ################################################## |
| # Select Positioning Protocol on A-GLONASS system |
| ################################################## |
| # 0x1: RRC CPlane |
| # 0x2: RRLP UPlane |
| # 0x4: LLP Uplane |
| #A_GLONASS_POS_PROTOCOL_SELECT = 0 |
| |
| # Below bit mask configures how GPS functionalities |
| # should be locked when user turns off GPS on Settings |
| # Set bit 0x1 if MO GPS functionalities are to be locked |
| # Set bit 0x2 if NI GPS functionalities are to be locked |
| # default - non is locked for backward compatibility |
| #GPS_LOCK = 0 |