| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2018, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| |
| <!-- Flag indicating whether the we should enable the automatic brightness in Settings. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used |
| for debouncing the light sensor. Different constants are used to debounce the light sensor |
| when adapting to brighter or darker environments. This parameter controls how quickly |
| brightness changes occur in response to an observed change in light level that exceeds the |
| hysteresis threshold. --> |
| <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer> |
| <integer name="config_autoBrightnessDarkeningLightDebounce">4000</integer> |
| |
| <!-- Auto-brightness sensor type string --> |
| <string name="config_displayLightSensorType">"com.google.sensor.combo_light"</string> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| <!-- Enable Night display, which requires HWC 2.0. --> |
| <bool name="config_nightDisplayAvailable">true</bool> |
| |
| <!-- Default color temperature, in Kelvin, to tint the screen when Night display is |
| activated. --> |
| <integer name="config_nightDisplayColorTemperatureDefault">3339</integer> |
| |
| <!-- Boolean indicating whether display white balance is supported. --> |
| <bool name="config_displayWhiteBalanceAvailable">true</bool> |
| |
| <!-- Boolean indicating whether display white balance should be enabled by default. --> |
| <bool name="config_displayWhiteBalanceEnabledDefault">true</bool> |
| |
| <!-- Minimum color temperature, in Kelvin, supported by display white balance. --> |
| <integer name="config_displayWhiteBalanceColorTemperatureMin">6300</integer> |
| |
| <!-- Maximum color temperature, in Kelvin, supported by display white balance. --> |
| <integer name="config_displayWhiteBalanceColorTemperatureMax">7450</integer> |
| |
| <!-- Default color temperature, in Kelvin, used by display white balance. --> |
| <integer name="config_displayWhiteBalanceColorTemperatureDefault">6700</integer> |
| |
| <!-- The nominal white coordinates, in CIE1931 XYZ color space, for Display White Balance to |
| use in its calculations. AWB will adapt this white point to the target ambient white |
| point. The array must include a total of 3 float values (X, Y, Z) --> |
| <string-array name="config_displayWhiteBalanceDisplayNominalWhite"> |
| <!-- Nominal White X --> <item>0.950000</item> |
| <!-- Nominal White Y --> <item>1.000000</item> |
| <!-- Nominal White Z --> <item>1.117485</item> |
| </string-array> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The debounce time (in milliseconds) for increasing the screen color temperature, throttled |
| if time > lastTime + debounce. Must be non-negative. --> |
| <integer name="config_displayWhiteBalanceIncreaseDebounce">2000</integer> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The debounce time (in milliseconds) for decreasing the screen color tempearture, throttled |
| if time < lastTime - debounce. Must be non-negative. --> |
| <integer name="config_displayWhiteBalanceDecreaseDebounce">3000</integer> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The ambient color temperature values used to determine the threshold as the corresponding |
| value in config_displayWhiteBalance{Increase,Decrease}Threholds. Must be non-empty, the |
| same length as config_displayWhiteBalance{Increase,Decrease}Thresholds, and contain |
| non-negative, strictly increasing numbers. |
| |
| For example, if: |
| |
| - baseThresolds = [0, 100, 1000]; |
| - increaseThresholds = [0.1, 0.15, 0.2]; |
| - decreaseThresholds = [0.1, 0.05, 0.0]; |
| |
| Then, given the ambient color temperature INCREASED from X to Y (so X < Y): |
| - If 0 <= Y < 100, we require Y > (1 + 0.1) * X = 1.1X; |
| - If 100 <= Y < 1000, we require Y > (1 + 0.15) * X = 1.15X; |
| - If 1000 <= Y, we require Y > (1 + 0.2) * X = 1.2X. |
| |
| Or, if the ambient color temperature DECREASED from X to Y (so X > Y): |
| - If 0 <= Y < 100, we require Y < (1 - 0.1) * X = 0.9X; |
| - If 100 <= Y < 1000, we require Y < (1 - 0.05) * X = 0.95X; |
| - If 1000 <= Y, we require Y < (1 - 0) * X = X. --> |
| <array name="config_displayWhiteBalanceBaseThresholds"> |
| <item>6300</item> |
| <item>6400</item> |
| <item>6850</item> |
| <item>7450</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The increase threshold values, throttled if value < value * (1 + threshold). Must be |
| non-empty, the same length as config_displayWhiteBalanceBaseThresholds, and contain |
| non-negative numbers. --> |
| <array name="config_displayWhiteBalanceIncreaseThresholds"> |
| <item>0.0078740</item> |
| <item>0.0075472</item> |
| <item>0.0069930</item> |
| <item>0.0067114</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The decrease threshold values, throttled if value > value * (1 - threshold). Must be |
| non-empty, the same length as config_displayWhiteBalanceBaseThresholds, and contain |
| non-negative numbers. --> |
| <array name="config_displayWhiteBalanceDecreaseThresholds"> |
| <item>0.0078740</item> |
| <item>0.0075472</item> |
| <item>0.0069930</item> |
| <item>0.0067114</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| A float array containing a list of ambient brightnesses, in Lux. This array, |
| together with config_displayWhiteBalanceLowLightAmbientBiases, is used to generate a |
| lookup table used in DisplayWhiteBalanceController. This lookup table is used to map |
| ambient brightness readings to a bias, where the bias is used to linearly interpolate |
| between ambient color temperature and |
| config_displayWhiteBalanceLowLightAmbientColorTemperature. |
| This table is optional. If used, this array must, |
| 1) Contain at least two entries |
| 2) Be the same length as config_displayWhiteBalanceLowLightAmbientBiases. --> |
| <array name ="config_displayWhiteBalanceLowLightAmbientBrightnesses"> |
| <item>10.0</item> |
| <item>50.0</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| An array containing a list of biases. See |
| config_displayWhiteBalanceLowLightAmbientBrightnesses for additional details. |
| This array must be in the range of [0.0, 1.0]. --> |
| <array name ="config_displayWhiteBalanceLowLightAmbientBiases"> |
| <item>0.0</item> |
| <item>1.0</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| The ambient color temperature (in cct) to which we interpolates towards to when the |
| ambient brightness is within the low light range, see |
| config_displayWhiteBalanceLowLightAmbientBrightnesses. --> |
| <item name="config_displayWhiteBalanceLowLightAmbientColorTemperature" format="float" type="dimen">6300.0</item> |
| |
| <!-- See DisplayWhiteBalanceController. |
| A float array containing a list of ambient brightnesses, in Lux. This array, |
| together with config_displayWhiteBalanceHighLightAmbientBiases, is used to generate a |
| lookup table used in DisplayWhiteBalanceController. This lookup table is used to map |
| ambient brightness readings to a bias, where the bias is used to linearly interpolate |
| between ambient color temperature and |
| config_displayWhiteBalanceHighLightAmbientColorTemperature. |
| This table is optional. If used, this array must, |
| 1) Contain at least two entries |
| 2) Be the same length as config_displayWhiteBalanceHighLightAmbientBiases. --> |
| <array name ="config_displayWhiteBalanceHighLightAmbientBrightnesses"> |
| <item>3000.0</item> |
| <item>5000.0</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| An array containing a list of biases. See |
| config_displayWhiteBalanceHighLightAmbientBrightnesses for additional details. |
| This array must be in the range of [0.0, 1.0]. --> |
| <array name ="config_displayWhiteBalanceHighLightAmbientBiases"> |
| <item>0.0</item> |
| <item>1.0</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| The ambient color temperature (in cct) to which we interpolates towards to when the |
| ambient brightness is within the high light range, see |
| config_displayWhiteBalanceHighLightAmbientBrightnesses. --> |
| <item name="config_displayWhiteBalanceHighLightAmbientColorTemperature" format="float" type="dimen">6700.0</item> |
| |
| <!-- See DisplayWhiteBalanceController. |
| A float array containing a list of ambient color temperatures, in Kelvin. This array, |
| together with config_displayWhiteBalanceDisplayColorTemperatures, is used to generate a |
| lookup table used in DisplayWhiteBalanceController. This lookup table is used to map |
| ambient color temperature readings to a target color temperature for the display. |
| This table is optional. If used, this array must, |
| 1) Contain at least two entries |
| 2) Be the same length as config_displayWhiteBalanceDisplayColorTemperatures. --> |
| <array name="config_displayWhiteBalanceAmbientColorTemperatures"> |
| <item>5300</item> |
| <item>6000</item> |
| <item>7000</item> |
| <item>8000</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| An array containing a list of display color temperatures, in Kelvin. See |
| config_displayWhiteBalanceAmbientColorTemperatures for additional details. |
| The same restrictions apply to this array. --> |
| <array name="config_displayWhiteBalanceDisplayColorTemperatures"> |
| <item>6300</item> |
| <item>6400</item> |
| <item>6850</item> |
| <item>7450</item> |
| </array> |
| |
| <!-- List supported color modes. --> |
| <integer-array name="config_availableColorModes"> |
| <item>0</item> <!-- COLOR_MODE_NATURAL --> |
| <item>1</item> <!-- COLOR_MODE_BOOSTED --> |
| <item>3</item> <!-- COLOR_MODE_AUTOMATIC --> |
| </integer-array> |
| |
| <!-- Color mode to use when accessibility transforms are enabled. This color mode must be |
| supported by the device, but not necessarily appear in config_availableColorModes. The |
| regularly selected color mode will be used if this value is negative. --> |
| <integer name="config_accessibilityColorMode">2</integer> |
| |
| <!-- The following two arrays specify which color space to use for display composition when a |
| certain color mode is active. |
| Composition color spaces are defined in android.view.Display.COLOR_MODE_xxx, and color |
| modes are defined in ColorDisplayManager.COLOR_MODE_xxx and |
| ColorDisplayManager.VENDOR_COLOR_MODE_xxx. |
| The color space COLOR_MODE_DEFAULT (0) lets the system select the most appropriate |
| composition color space for currently displayed content. Other values (e.g., |
| COLOR_MODE_SRGB) override system selection; these other color spaces must be supported by |
| the device for for display composition. |
| If a color mode does not have a corresponding color space specified in this array, the |
| currently set composition color space will not be modified.--> |
| <integer-array name="config_displayCompositionColorModes"> |
| <item>0</item> <!-- COLOR_MODE_NATURAL --> |
| <item>1</item> <!-- COLOR_MODE_BOOSTED --> |
| <item>2</item> <!-- COLOR_MODE_SATURATED --> |
| <item>3</item> <!-- COLOR_MODE_AUTOMATIC --> |
| </integer-array> |
| <integer-array name="config_displayCompositionColorSpaces"> |
| <item>0</item> <!-- COLOR_MODE_DEFAULT --> |
| <item>0</item> <!-- COLOR_MODE_DEFAULT --> |
| <item>0</item> <!-- COLOR_MODE_DEFAULT --> |
| <item>9</item> <!-- COLOR_MODE_DISPLAY_P3 --> |
| </integer-array> |
| |
| <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently |
| in hardware. --> |
| <bool name="config_setColorTransformAccelerated">true</bool> |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true --> |
| <bool translatable="false" name="skip_restoring_network_selection">true</bool> |
| |
| <!-- If device has a sensor that can wake-up the lock screen --> |
| <bool name="config_dozeWakeLockScreenSensorAvailable">true</bool> |
| |
| <!-- If device supports pickup/lift gesture --> |
| <bool name="config_dozePulsePickup">true</bool> |
| |
| <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> |
| <bool name="config_cellBroadcastAppLinks">true</bool> |
| |
| <!-- Whether Multiuser UI should be shown --> |
| <bool name="config_enableMultiUserUI">true</bool> |
| |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">4</integer> |
| |
| <!-- Whether Hearing Aid profile is supported --> |
| <bool name="config_hearing_aid_profile_supported">true</bool> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| USB interfaces. If the device doesn't want to support tething over USB this should |
| be empty. An example would be "usb.*" --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| <item>"usb\\d"</item> |
| <item>"rndis\\d"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| <item>"wlan\\d"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this |
| should be empty. --> |
| <string-array translatable="false" name="config_tether_bluetooth_regexs"> |
| <item>"bt-pan"</item> |
| </string-array> |
| |
| <!-- Boolean indicating if current platform supports HFP inband ringing --> |
| <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool> |
| |
| <bool translatable="false" name="config_tether_upstream_automatic">true</bool> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,2,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_dun,4,0,2,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"mobile_fota,10,0,2,60000,true"</item> |
| <item>"mobile_ims,11,0,2,60000,true"</item> |
| <item>"mobile_cbs,12,0,2,60000,true"</item> |
| <item>"mobile_ia,14,0,2,-1,true"</item> |
| <item>"bluetooth,7,7,2,-1,true"</item> |
| <item>"ethernet,9,9,9,-1,true"</item> |
| <item>"mobile_emergency,15,0,2,-1,true</item> |
| </string-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| <item>"7,1"</item> |
| <item>"9,1"</item> |
| </string-array> |
| |
| <!-- If the hardware supports specially marking packets that caused a wakeup of the |
| main CPU, set this value to the mark used. --> |
| <integer name="config_networkWakeupPacketMark">0x80000000</integer> |
| |
| <!-- Mask to use when checking skb mark defined in config_networkWakeupPacketMark above. --> |
| <integer name="config_networkWakeupPacketMask">0x80000000</integer> |
| |
| <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> |
| <bool translatable="false" name="config_wifi_dual_band_support">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset requires the softap band be --> |
| <!-- converted from 5GHz to ANY due to hardware restrictions --> |
| <bool translatable="false" name="config_wifi_convert_apband_5ghz_to_any">true</bool> |
| |
| <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform --> |
| <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset has background scan support --> |
| <bool translatable="false" name="config_wifi_background_scan_support">true</bool> |
| |
| |
| <!-- Wifi driver supports batched scan --> |
| <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool> |
| |
| <!-- Boolean indicating whether or not to revert to default country code when cellular |
| radio is unable to find any MCC information to infer wifi country code from --> |
| <bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">false</bool> |
| |
| <!-- Array indicating wifi fatal firmware alert error code list from driver --> |
| <integer-array translatable="false" name="config_wifi_fatal_firmware_alert_error_code_list"> |
| <item>1</item> <!-- WLAN_LOG_REASON_ROAM_FAIL --> |
| <item>256</item> <!-- DATA_STALL_LOG_NONE --> |
| <item>257</item> <!-- DATA_STALL_LOG_FW_VDEV_PAUSE --> |
| <item>258</item> <!-- DATA_STALL_LOG_HWSCHED_CMD_FILTER --> |
| <item>259</item> <!-- DATA_STALL_LOG_HWSCHED_CMD_FLUSH --> |
| <item>260</item> <!-- DATA_STALL_LOG_FW_RX_REFILL_FAILED --> |
| <item>261</item> <!-- DATA_STALL_LOG_FW_RX_FCS_LEN_ERROR --> |
| <item>262</item> <!-- DATA_STALL_LOG_FW_WDOG_ERRORS --> |
| <item>263</item> <!-- DATA_STALL_LOG_BB_WDOG_ERROR --> |
| <item>264</item> <!-- DATA_STALL_LOG_POST_TIM_NO_TXRX_ERROR --> |
| <item>512</item> <!-- DATA_STALL_LOG_HOST_STA_TX_TIMEOUT --> |
| <item>513</item> <!-- DATA_STALL_LOG_HOST_SOFTAP_TX_TIMEOUT --> |
| <item>514</item> <!-- DATA_STALL_LOG_NUD_FAILURE --> |
| </integer-array> |
| |
| <!-- Boolean indicating whether or not wifi should turn off when emergency call is made --> |
| <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">true</bool> |
| |
| <!-- ImsService package name to bind to by default, if config_dynamic_bind_ims is true --> |
| <string name="config_ims_package">org.codeaurora.ims</string> |
| |
| <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically --> |
| <bool name="config_dynamic_bind_ims">true</bool> |
| |
| <!-- Specifies whether to decouple the auto-suspend state of the device from the display on/off state. --> |
| <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool> |
| |
| <!-- Specifies whether to decouple the interactive state of the device from the display on/off state. --> |
| <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool> |
| |
| <!-- Is the device capable of hot swapping an UICC Card --> |
| <bool name="config_hotswapCapable">true</bool> |
| |
| <!-- Flag specifying whether VoLTE is availasble on device --> |
| <bool name="config_device_volte_available">true</bool> |
| |
| <!-- Flag specifying whether VoLTE is available on device --> |
| <bool name="config_device_vt_available">true</bool> |
| |
| <!-- Enable video pause workaround when enabling/disabling the camera. --> |
| <bool name="config_useVideoPauseWorkaround">true</bool> |
| |
| <!-- Flag specifying whether WFC over IMS is availasble on device --> |
| <bool name="config_device_wfc_ims_available">true</bool> |
| |
| <!-- Configure mobile tcp buffer sizes in the form: |
| rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max |
| If no value is found for the rat-name in use, the system default will be applied. |
| --> |
| <string-array name="config_mobile_tcp_buffers"> |
| <item>umts:131072,262144,1452032,4096,16384,399360</item> |
| <item>hspa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hsupa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hsdpa:131072,262144,2441216,4096,16384,399360</item> |
| <item>hspap:131072,262144,2441216,4096,16384,399360</item> |
| <item>edge:16384,32768,131072,4096,16384,65536</item> |
| <item>gprs:4096,8192,24576,4096,8192,24576</item> |
| <item>1xrtt:16384,32768,131070,4096,16384,102400</item> |
| <item>evdo:131072,262144,1048576,4096,16384,524288</item> |
| <item>lte:524288,1048576,8388608,262144,524288,4194304</item> |
| </string-array> |
| |
| <!-- Configure wifi tcp buffersizes in the form: |
| rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max --> |
| <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,8388608,262144,524288,4194304</string> |
| |
| <!-- Idle Receive current for wifi radio. 0 by default--> |
| <integer translatable="false" name="config_wifi_idle_receive_cur_ma">1</integer> |
| |
| <!-- Rx current for wifi radio. 0 by default--> |
| <integer translatable="false" name="config_wifi_active_rx_cur_ma">100</integer> |
| |
| <!-- Tx current for wifi radio. 0 by default--> |
| <integer translatable="false" name="config_wifi_tx_cur_ma">250</integer> |
| |
| <!-- Operating volatage for wifi radio. 0 by default--> |
| <integer translatable="false" name="config_wifi_operating_voltage_mv">3800</integer> |
| |
| <!-- Config SoftAP 2G channel list --> |
| <string translatable="false" name="config_wifi_framework_sap_2G_channel_list">6</string> |
| |
| <!-- Config determines whether to update phone object when voice registration |
| state changes. Voice radio tech change will always trigger an update of |
| phone object irrespective of this config --> |
| <bool name="config_switch_phone_on_voice_reg_state_change">false</bool> |
| |
| <!-- Number of physical SIM slots on the device. This includes both eSIM and pSIM slots, and |
| is not necessarily the same as the number of phones/logical modems supported by the device. |
| For example, a multi-sim device can have 2 phones/logical modems, but 3 physical slots, |
| or a single SIM device can have 1 phones/logical modems, but 2 physical slots (one eSIM |
| and one pSIM) --> |
| <integer name="config_num_physical_slots">2</integer> |
| |
| <!-- Disables compatibility WAL mode. |
| In this mode, only database journal mode will be changed, connection pool |
| size will still be limited to a single connection. --> |
| <bool name="db_compatibility_wal_supported">false</bool> |
| |
| <!-- Use ERI text for network name on CDMA LTE --> |
| <bool name="config_LTE_eri_for_network_name">false</bool> |
| |
| <!-- Default list of files pinned by the Pinner Service --> |
| <string-array translatable="false" name="config_defaultPinnerServiceFiles"> |
| <item>"/system/framework/arm64/boot-framework.oat"</item> |
| <item>"/system/framework/framework.jar"</item> |
| <item>"/system/framework/oat/arm64/services.odex"</item> |
| <item>"/system/framework/services.jar"</item> |
| <item>"/system/framework/arm64/boot.oat"</item> |
| <item>"/system/framework/arm64/boot-core-libart.oat"</item> |
| <item>"/apex/com.android.runtime/javalib/core-oj.jar"</item> |
| <item>"/apex/com.android.runtime/javalib/core-libart.jar"</item> |
| <item>"/apex/com.android.media/javalib/updatable-media.jar"</item> |
| <item>"/product/priv-app/SystemUIGoogle/SystemUIGoogle.apk"</item> |
| <item>"/product/priv-app/SystemUIGoogle/oat/arm64/SystemUIGoogle.odex"</item> |
| <item>"/system/lib64/libsurfaceflinger.so"</item> |
| </string-array> |
| |
| <!-- Should the pinner service pin the Camera application? --> |
| <bool name="config_pinnerCameraApp">true</bool> |
| |
| <!-- Should the pinner service pin the Home application? --> |
| <bool name="config_pinnerHomeApp">true</bool> |
| |
| <!-- List of files pinned by the Pinner Service with the apex boot image b/119800099 --> |
| <string-array translatable="false" name="config_apexBootImagePinnerServiceFiles"> |
| <item>"/system/framework/framework.jar"</item> |
| <item>"/system/framework/services.jar"</item> |
| <item>"/system/framework/arm64/apex.oat"</item> |
| <item>"/system/framework/arm64/apex-core-libart.oat"</item> |
| <item>"/apex/com.android.runtime/javalib/core-oj.jar"</item> |
| <item>"/apex/com.android.runtime/javalib/core-libart.jar"</item> |
| <item>"/apex/com.android.media/javalib/updatable-media.jar"</item> |
| <item>"/system/priv-app/SystemUIGoogle/SystemUIGoogle.apk"</item> |
| <item>"/system/lib64/libsurfaceflinger.so"</item> |
| </string-array> |
| |
| <!-- An array of device capabilities defined by GSMA SGP.22 v2.0, and their corresponding major |
| version. --> |
| <string-array translatable="false" name="config_telephonyEuiccDeviceCapabilities"> |
| <item>"gsm,11"</item> |
| <item>"utran,11"</item> |
| <item>"cdma1x,1"</item> |
| <item>"hrpd,3"</item> |
| <item>"ehrpd,12"</item> |
| <item>"eutran,11"</item> |
| </string-array> |
| |
| <!-- Whether the new Auto Selection Network UI should be shown --> |
| <bool name="config_enableNewAutoSelectNetworkUI">true</bool> |
| |
| <!-- Enable ACS (auto channel selection) for Wifi hotspot (SAP) --> |
| <bool translatable="false" name="config_wifi_softap_acs_supported">true</bool> |
| |
| <!-- Enable 802.11ac for Wifi hotspot (SAP) --> |
| <bool translatable="false" name="config_wifi_softap_ieee80211ac_supported">true</bool> |
| |
| <!-- Integer thresholds, do not connect to APs with RSSI lower than these values --> |
| <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_5GHz">-77</integer> |
| <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_24GHz">-80</integer> |
| <!-- Integer thresholds for low network score, should be somewhat less than the entry threshholds --> |
| <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-80</integer> |
| <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-83</integer> |
| |
| <string name="config_wlan_data_service_package">vendor.qti.iwlan</string> |
| <string name="config_wlan_network_service_package">vendor.qti.iwlan</string> |
| <string name="config_qualified_networks_service_package">vendor.qti.iwlan</string> |
| |
| <!-- Enables or disables haptic effect when the text insertion/selection handle is moved |
| manually by the user. Off by default, since the expected haptic feedback may not be |
| available on some devices. --> |
| <bool name="config_enableHapticTextHandle">true</bool> |
| <!-- Enable Zram writeback feature to allow unused pages in zram be written to flash. --> |
| <bool name="config_zramWriteback">true</bool> |
| |
| <!-- True if the firmware supports connected MAC randomization --> |
| <bool name="config_wifi_connected_mac_randomization_supported">true</bool> |
| |
| <!-- True if the firmware supports p2p MAC randomization --> |
| <bool name="config_wifi_p2p_mac_randomization_supported">true</bool> |
| |
| <!-- True if the firmware supports Wi-Fi link probing --> |
| <bool name="config_wifi_link_probing_supported">true</bool> |
| |
| <!-- The default intensity level for haptic feedback. See |
| Settings.System.HAPTIC_FEEDBACK_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultHapticFeedbackIntensity">3</integer> |
| <!-- The default intensity level for notification vibrations. See |
| Settings.System.NOTIFICATION_VIBRATION_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultNotificationVibrationIntensity">3</integer> |
| <!-- The default intensity level for notification vibrations. See |
| Settings.System.RING_VIBRATION_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultRingVibrationIntensity">3</integer> |
| <!-- Integer delay in milliseconds before set wlan interface up during watchdog recovery --> |
| <integer name="config_wifi_framework_recovery_timeout_delay">3000</integer> |
| <!-- User activity timeout: Minimum screen off timeout in milliseconds. |
| |
| Sets a lower bound for the {@link Settings.System#SCREEN_OFF_TIMEOUT} setting |
| which determines how soon the device will go to sleep when there is no |
| user activity. |
| |
| This value must be greater than zero, otherwise the device will immediately |
| fall asleep again as soon as it is awoken. |
| --> |
| <integer name="config_minimumScreenOffTimeout">7000</integer> |
| |
| <!-- An array describing the screen's backlight values corresponding to the brightness |
| values in the config_screenBrightnessNits array. |
| |
| This array should be equal in size to config_screenBrightnessBacklight. --> |
| <integer-array name="config_screenBrightnessBacklight"> |
| <item>1</item> |
| <item>255</item> |
| </integer-array> |
| |
| <!-- An array of floats describing the screen brightness in nits corresponding to the backlight |
| values in the config_screenBrightnessBacklight array. On OLED displays these values |
| should be measured with an all white image while the display is in the fully on state. |
| Note that this value should *not* reflect the maximum brightness value for any high |
| brightness modes but only the maximum brightness value obtainable in a sustainable manner. |
| |
| This array should be equal in size to config_screenBrightnessBacklight --> |
| <array name="config_screenBrightnessNits"> |
| <item>2.0</item> |
| <item>450.0</item> |
| </array> |
| |
| <!-- Display 90Hz blacklist. Apps that do not work well when the display refreshes at 90Hz. |
| When these apps are visible, the display's refresh rate gets fixed to 60Hz. --> |
| <string-array name="config_highRefreshRateBlacklist"> |
| <item>com.google.android.apps.maps</item> |
| <item>com.nianticlabs.pokemongo</item> |
| <item>com.waze</item> |
| <item>com.tencent.mm</item> |
| </string-array> |
| |
| <!-- Disable AOD by default --> |
| <bool name="config_dozeAlwaysOnEnabled">false</bool> |
| |
| </resources> |
