firmware: Add neonkey Android build config
Bug: 34706230
Test: Manual
Change-Id: Ia4add2a218cc3b5e3bc61d30e0a69936a60f639b
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/firmware/neonkey_aux_variant_config.mk b/firmware/neonkey_aux_variant_config.mk
new file mode 100644
index 0000000..6698c7c
--- /dev/null
+++ b/firmware/neonkey_aux_variant_config.mk
@@ -0,0 +1,80 @@
+#
+# Copyright (C) 2017 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# only locally defined variables can be used at this time
+
+my_variant := neonkey
+
+AUX_OS_$(my_variant) := nanohub
+AUX_ARCH_$(my_variant) := stm32
+AUX_SUBARCH_$(my_variant) := stm32f411
+AUX_CPU_$(my_variant) := cortexm4
+
+# variant supports building OS bootloader, main OS image and application as targets
+# target should one of the following:
+# "" (empty) -- applies to all targets
+# _BL -- applies to OS bootloader target build only
+# _OS -- applies to OS image target build only
+# _APP -- applies to application target build only
+#
+# the following variables may be defined in variant script for any target:
+# NANO_VARIANT<target>_CFLAGS_<variant>
+# NANO_VARIANT<target>_C_INCLUDES_<variant>
+# NANO_VARIANT<target>_STATIC_LIBRARIRES_<variant>
+# NANO_VARIANT<target>_WHOLE_STATIC_LIBRARIRES_<variant>
+#
+# the following may be defined for _OS and _BL only, to control
+# what additional source files need to be included in the build;
+# the file paths in this list are relative to the target (_OS or _BL) LOCAL_PATH;
+# NANO_VARIANT<target>_SRC_FILES_<variant>
+
+NANO_VARIANT_OSCFG_STATIC_LIBRARIES_$(my_variant) := libnanohub_os_$(my_variant)
+
+NANO_VARIANT_OS_CFLAGS_$(my_variant) := \
+ -DUSE_BMM150 \
+ -DMAG_SLAVE_PRESENT \
+ -DDEBUG_SWD \
+
+#'Ne' ->neonkey
+NANO_VARIANT_CFLAGS_$(my_variant) := -DPLATFORM_HW_TYPE=0x4E65
+
+NANO_VARIANT_C_INCLUDES_$(my_variant) := \
+ device/google/contexthub/firmware/variant/neonkey/inc \
+
+# this is relative to NANOHUB_OS_PATH
+NANO_VARIANT_OSCFG_SRC_FILES_$(my_variant) := \
+ os/algos/calibration/accelerometer/accel_cal.c \
+ os/algos/calibration/gyroscope/gyro_cal.c \
+ os/algos/calibration/gyroscope/gyro_stillness_detect.c \
+ os/algos/calibration/magnetometer/mag_cal.c \
+ os/algos/calibration/common/diversity_checker.c \
+ os/algos/calibration/over_temp/over_temp_cal.c \
+ os/algos/common/math/mat.c \
+ os/algos/common/math/quat.c \
+ os/algos/common/math/vec.c \
+ os/algos/fusion.c \
+ os/algos/time_sync.c \
+ os/drivers/bosch_bmi160/bosch_bmi160.c \
+ os/drivers/bosch_bmi160/bosch_bmm150_slave.c \
+ os/drivers/bosch_bmp280/bosch_bmp280.c \
+ os/drivers/hall/hall.c \
+ os/drivers/leds/leds_gpio.c \
+ os/drivers/leds/leds_lp3943.c \
+ os/drivers/orientation/orientation.c \
+ os/drivers/rohm_rpr0521/rohm_rpr0521.c \
+ os/drivers/si_si7034/si7034a10.c \
+ os/drivers/tilt_detection/tilt_detection.c \
+ os/drivers/window_orientation/window_orientation.c \
diff --git a/firmware/variant/neonkey/neonkey.mk b/firmware/variant/neonkey/neonkey.mk
index 72f59b8..b762f92 100644
--- a/firmware/variant/neonkey/neonkey.mk
+++ b/firmware/variant/neonkey/neonkey.mk
@@ -21,7 +21,7 @@
$(error "NEONKEY variant cannot be build on a platform that is not stm32")
endif
-FLAGS += -DPLATFORM_HW_TYPE=0x4E75 #'Nu' ->neonkey
+FLAGS += -DPLATFORM_HW_TYPE=0x4E65 #'Ne' ->neonkey
FLAGS += -DDEBUG_SWD
FLAGS += -I$(VARIANT_PATH)/inc