| # |
| # Copyright (C) 2021 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| SHIPPING_API_LEVEL := 34 |
| |
| ifdef RELEASE_GOOGLE_COMET_RADIO_DIR |
| RELEASE_GOOGLE_PRODUCT_RADIO_DIR := $(RELEASE_GOOGLE_COMET_RADIO_DIR) |
| endif |
| ifdef RELEASE_GOOGLE_COMET_RADIOCFG_DIR |
| RELEASE_GOOGLE_PRODUCT_RADIOCFG_DIR := $(RELEASE_GOOGLE_COMET_RADIOCFG_DIR) |
| endif |
| RELEASE_GOOGLE_BOOTLOADER_COMET_DIR ?= 24D1# Keep this for pdk TODO: b/327119000 |
| RELEASE_GOOGLE_PRODUCT_BOOTLOADER_DIR := bootloader/$(RELEASE_GOOGLE_BOOTLOADER_COMET_DIR) |
| $(call soong_config_set,comet_bootloader,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_COMET_DIR)) |
| |
| TARGET_LINUX_KERNEL_VERSION ?= 6.1 |
| ifdef RELEASE_KERNEL_COMET_DIR |
| TARGET_KERNEL_DIR ?= $(RELEASE_KERNEL_COMET_DIR) |
| TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_COMET_DIR)/kernel-headers |
| else |
| TARGET_KERNEL_DIR ?= device/google/comet-kernels/6.1/24D1 |
| TARGET_BOARD_KERNEL_HEADERS ?= device/google/comet-kernels/6.1/24D1/kernel-headers |
| endif |
| |
| TARGET_RECOVERY_DEFAULT_ROTATION := ROTATION_RIGHT |
| |
| LOCAL_PATH := device/google/comet |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| USE_UWBFIELDTESTQM := true |
| endif |
| ifeq ($(filter factory_comet, $(TARGET_PRODUCT)),) |
| include device/google/comet/uwb/uwb_calibration.mk |
| endif |
| |
| $(call inherit-product-if-exists, vendor/google_devices/comet/prebuilts/device-vendor-comet.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/zumapro/prebuilts/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/zumapro/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/comet/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/comet/proprietary/comet/device-vendor-comet.mk) |
| $(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk) |
| |
| ifeq ($(filter factory_comet, $(TARGET_PRODUCT)),) |
| $(call inherit-product-if-exists, vendor/google_devices/comet/proprietary/WallpapersComet.mk) |
| endif |
| |
| DEVICE_PACKAGE_OVERLAYS += device/google/comet/comet/overlay |
| |
| ifeq ($(RELEASE_PIXEL_AIDL_AUDIO_HAL),true) |
| USE_AUDIO_HAL_AIDL := true |
| endif |
| |
| include device/google/comet/audio/comet/audio-tables.mk |
| include device/google/zumapro/device-shipping-common.mk |
| include hardware/google/pixel/vibrator/cs40l26/device.mk |
| include device/google/gs-common/bcmbt/bluetooth.mk |
| include device/google/gs-common/touch/gti/predump_gti_dual.mk |
| include device/google/gs-common/display/dump_second_display.mk |
| include device/google/gs-common/gril/hidl/1.7/gril_hidl.mk |
| |
| # Increment the SVN for any official public releases |
| ifdef RELEASE_SVN_COMET |
| TARGET_SVN ?= $(RELEASE_SVN_COMET) |
| else |
| # Set this for older releases that don't use build flag |
| TARGET_SVN ?= 04 |
| endif |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.build.svn=$(TARGET_SVN) |
| |
| # Set device family property for SMR |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.build.device_family=CT3 |
| |
| # Set build properties for SMR builds |
| ifeq ($(RELEASE_IS_SMR), true) |
| ifneq (,$(RELEASE_BASE_OS_COMET)) |
| PRODUCT_BASE_OS := $(RELEASE_BASE_OS_COMET) |
| endif |
| endif |
| |
| # Set build properties for EMR builds |
| ifeq ($(RELEASE_IS_EMR), true) |
| ifneq (,$(RELEASE_BASE_OS_COMET)) |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.build.version.emergency_base_os=$(RELEASE_BASE_OS_COMET) |
| endif |
| endif |
| |
| # go/lyric-soong-variables |
| $(call soong_config_set,lyric,camera_hardware,comet) |
| $(call soong_config_set,lyric,tuning_product,comet) |
| $(call soong_config_set,google3a_config,target_device,comet) |
| |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true |
| |
| # Init files |
| PRODUCT_COPY_FILES += \ |
| device/google/comet/conf/init.comet.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.comet.rc |
| |
| # Recovery files |
| PRODUCT_COPY_FILES += \ |
| device/google/comet/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.comet.rc |
| |
| # Display brightness curve |
| PRODUCT_COPY_FILES += \ |
| device/google/comet/comet/panel_config_google-ct3a_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-ct3a_cal0.pb \ |
| device/google/comet/comet/panel_config_google-ct3b_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-ct3b_cal0.pb \ |
| device/google/comet/comet/panel_config_google-ct3c_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-ct3c_cal1.pb \ |
| device/google/comet/comet/panel_config_google-ct3d_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-ct3d_cal1.pb \ |
| device/google/comet/comet/panel_config_google-ct3e_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-ct3e_cal1.pb |
| |
| ifeq ($(filter factory_comet, $(TARGET_PRODUCT)),) |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.xrr.version=2.1 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.blocking_zone.min_refresh_rate_by_nits=20:120,30:60,:1 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.expected_present.headsup_ns=30000000 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.expected_present.timeout_ns=500000000 |
| endif |
| |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.powerstats.entity_name=Inner-Display |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.primarydisplay.op.hs_hz=120 \ |
| vendor.primarydisplay.op.ns_hz=120 |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.camera.debug.enable_software_post_sharpen_node=false |
| |
| # Display Config |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| vendor.display.png.premultiplied=true |
| |
| # Coex Config |
| PRODUCT_SOONG_NAMESPACES += device/google/comet/radio/coex |
| PRODUCT_PACKAGES += \ |
| display_secondary_mipi_coex_table \ |
| camera_front_inner_mipi_coex_table \ |
| camera_front_outer_mipi_coex_table \ |
| camera_rear_tele_mipi_coex_table \ |
| camera_rear_wide_mipi_coex_table |
| |
| # NFC |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ |
| frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ |
| device/google/comet/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ |
| device/google/comet/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf |
| |
| PRODUCT_PACKAGES += \ |
| $(RELEASE_PACKAGE_NFC_STACK) \ |
| Tag \ |
| android.hardware.nfc-service.st \ |
| NfcOverlayComet |
| |
| # SecureElement |
| PRODUCT_PACKAGES += \ |
| android.hardware.secure_element-service.thales |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \ |
| frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \ |
| device/google/comet/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf |
| |
| #Thermal VT estimator |
| PRODUCT_PACKAGES += \ |
| libthermal_tflite_wrapper |
| |
| # Thermal Config |
| ifeq (,$(TARGET_VENDOR_THERMAL_CONFIG_PATH)) |
| TARGET_VENDOR_THERMAL_CONFIG_PATH := device/google/comet/thermal |
| endif |
| |
| PRODUCT_COPY_FILES += \ |
| $(TARGET_VENDOR_THERMAL_CONFIG_PATH)/thermal_info_config_charge_comet.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json \ |
| $(TARGET_VENDOR_THERMAL_CONFIG_PATH)/thermal_info_config_comet.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \ |
| $(TARGET_VENDOR_THERMAL_CONFIG_PATH)/thermal_info_config_backup_comet.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_backup.json \ |
| $(TARGET_VENDOR_THERMAL_CONFIG_PATH)/vt_estimation_model_comet.tflite:$(TARGET_COPY_OUT_VENDOR)/etc/vt_estimation_model.tflite \ |
| $(TARGET_VENDOR_THERMAL_CONFIG_PATH)/vt_speaker_estimation_model_comet.tflite:$(TARGET_COPY_OUT_VENDOR)/etc/vt_speaker_estimation_model.tflite \ |
| |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_COPY_FILES += \ |
| $(TARGET_VENDOR_THERMAL_CONFIG_PATH)/thermal_info_config_comet_wingboard.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_wingboard.json |
| endif |
| |
| PRODUCT_PACKAGES += \ |
| init_thermal_config |
| |
| # Power HAL config |
| PRODUCT_COPY_FILES += \ |
| device/google/comet/powerhint-comet.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json |
| |
| # Bluetooth HAL |
| PRODUCT_COPY_FILES += \ |
| device/google/comet/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.bluetooth.a2dp_offload.supported=true \ |
| persist.bluetooth.a2dp_offload.disabled=false \ |
| persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac |
| |
| # Bluetooth Tx power caps |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_comet.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_comet_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_comet_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_comet_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \ |
| $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_comet_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv |
| |
| # DCK properties based on target |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.gms.dck.eligible_wcc=3 \ |
| ro.gms.dck.se_capability=1 |
| |
| # Bluetooth hci_inject test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| hci_inject |
| |
| # Bluetooth SAR test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| sar_test |
| |
| # Bluetooth EWP test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| ewp_tool |
| |
| # Bluetotoh Auto On feature |
| PRODUCT_PRODUCT_PROPERTIES +=\ |
| bluetooth.server.automatic_turn_on=true |
| |
| # Bluetooth AAC VBR |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.a2dp_aac.vbr_supported=true |
| |
| # Bluetooth Super Wide Band |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.hfp.swb.supported=true |
| |
| # Override BQR mask to enable LE Audio Choppy report, remove BTRT logging |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.bqr.event_mask=295006 \ |
| persist.bluetooth.bqr.vnd_quality_mask=29 \ |
| persist.bluetooth.bqr.vnd_trace_mask=0 \ |
| persist.bluetooth.vendor.btsnoop=true |
| else |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.bqr.event_mask=295006 \ |
| persist.bluetooth.bqr.vnd_quality_mask=16 \ |
| persist.bluetooth.bqr.vnd_trace_mask=0 \ |
| persist.bluetooth.vendor.btsnoop=false |
| endif |
| |
| # Support LE & Classic concurrent encryption (b/330704060) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.ble.allow_enc_with_bredr=true |
| |
| # POF |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.finder.supported=true |
| |
| # Spatial Audio |
| PRODUCT_PACKAGES += \ |
| libspatialaudio \ |
| librondo |
| |
| # declare use of spatial audio |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.audio.spatializer_enabled=true \ |
| ro.audio.spatializer_transaural_enabled_default=false \ |
| persist.vendor.audio.spatializer.speaker_enabled=true |
| |
| # declare use of stereo spatialization |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.audio.stereo_spatialization_enabled=true |
| |
| ifneq ($(USE_AUDIO_HAL_AIDL),true) |
| # HIDL Sound Dose |
| PRODUCT_PACKAGES += \ |
| android.hardware.audio.sounddose-vendor-impl \ |
| audio_sounddose_aoc |
| endif |
| |
| # Audio CCA property |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.audio.cca.enabled=false |
| |
| # HdMic Audio |
| PRODUCT_SOONG_NAMESPACES += device/google/comet/audio/comet/prebuilt/libspeechenhancer |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.app.audio.gsenet.version=1 |
| PRODUCT_PACKAGES += \ |
| libspeechenhancer |
| |
| # Keymaster HAL |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # Gatekeeper HAL |
| #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software |
| |
| |
| # Gatekeeper |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.gatekeeper@1.0-service.software |
| |
| # Keymint replaces Keymaster |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.security.keymint-service |
| |
| # Keymaster |
| #PRODUCT_PACKAGES += \ |
| # android.hardware.keymaster@4.0-impl \ |
| # android.hardware.keymaster@4.0-service |
| |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # PRODUCT_PROPERTY_OVERRIDES += \ |
| # ro.hardware.keystore_desede=true \ |
| # ro.hardware.keystore=software \ |
| # ro.hardware.gatekeeper=software |
| |
| # PowerStats HAL |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/comet/powerstats/comet |
| |
| # UWB Overlay |
| PRODUCT_PACKAGES += \ |
| UwbOverlayCT3 |
| |
| # WiFi Overlay |
| PRODUCT_PACKAGES += \ |
| WifiOverlay2024Mid_CT3 \ |
| PixelWifiOverlay2024 |
| |
| # GRil Overlay |
| PRODUCT_PACKAGES += \ |
| GRilServiceOverlay_CT3 |
| |
| # Settings Overlay |
| PRODUCT_PACKAGES += \ |
| SettingsCometOverlay |
| |
| # Graphics |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.set_idle_timer_ms_4619827677550801152=80 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.support_kernel_idle_timer_4619827677550801152=true |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.set_idle_timer_ms_4619827677550801153=1000 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.support_kernel_idle_timer_4619827677550801153=false |
| |
| # Trusty liboemcrypto.so |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/comet/prebuilts |
| |
| # UWB |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/comet/uwb |
| |
| # Location |
| PRODUCT_SOONG_NAMESPACES += device/google/comet/location |
| # For GPS property |
| PRODUCT_VENDOR_PROPERTIES += ro.vendor.gps.pps.enabled=true |
| $(call soong_config_set, gpssdk, buildtype, $(TARGET_BUILD_VARIANT)) |
| PRODUCT_PACKAGES += gps.cfg |
| |
| # Display |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ |
| vendor.display.lbe.supported=1 \ |
| vendor.display.async_off.supported=true |
| |
| # Install product specific framework compatibility matrix |
| DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE += device/google/comet/device_framework_matrix_product.xml |
| |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.device_config.configuration.disable_rescue_party=true |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.udfps.als_feed_forward_supported=true \ |
| persist.vendor.udfps.lhbm_controlled_in_hal_supported=true |
| |
| # Allow external binning setting |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.allow_external_binning_setting=true |
| |
| # Camera Vendor property |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.front_720P_always_binning=true |
| |
| # Enable camera exif model/make reporting |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.exif_reveal_make_model=true |
| |
| # Media Performance Class 14 |
| PRODUCT_PRODUCT_PROPERTIES += ro.odm.build.media_performance_class=34 |
| |
| # OIS with system imu |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.ois_with_system_imu=true |
| |
| # Haptics |
| # Placeholders for updates later, need to update: |
| # remove ro.vendor.vibrator.hal.dbc.enable (needed for setting pm.activetimeout) |
| # remove pm.activetimeout |
| # ro.vendor.vibrator.hal.loc.coeff.folded currently unused |
| $(call soong_config_set,haptics,kernel_ver,v$(subst .,_,$(TARGET_LINUX_KERNEL_VERSION))) |
| ACTUATOR_MODEL := luxshare_ict_081545 |
| ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1 |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.vibrator.hal.chirp.enabled=1 \ |
| ro.vendor.vibrator.hal.device.mass=0.2605 \ |
| ro.vendor.vibrator.hal.loc.coeff.folded=3.15 \ |
| ro.vendor.vibrator.hal.loc.coeff=2.58 \ |
| ro.vendor.vibrator.hal.dbc.enable=1 \ |
| ro.vendor.vibrator.hal.pm.activetimeout=5 \ |
| persist.vendor.vibrator.hal.context.enable=false \ |
| persist.vendor.vibrator.hal.context.scale=60 \ |
| persist.vendor.vibrator.hal.context.fade=true \ |
| persist.vendor.vibrator.hal.context.cooldowntime=1600 \ |
| persist.vendor.vibrator.hal.context.settlingtime=5000 |
| |
| # Override Output Distortion Gain |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.audio.hapticgenerator.distortion.output.gain=0.45 |
| |
| # Hinge angle sensor |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.sensor.hinge_angle.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hinge_angle.xml |
| |
| # Keyboard height ratio and bottom padding in dp for portrait mode |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.com.google.ime.kb_pad_port_b=11.2 \ |
| ro.com.google.ime.height_ratio=1.18 |
| |
| |
| # Bluetooth LE Audio |
| # Unicast |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.profile.bap.unicast.client.enabled=true \ |
| bluetooth.profile.csip.set_coordinator.enabled=true \ |
| bluetooth.profile.hap.client.enabled=true \ |
| bluetooth.profile.mcp.server.enabled=true \ |
| bluetooth.profile.ccp.server.enabled=true \ |
| bluetooth.profile.vcp.controller.enabled=true |
| |
| ifeq ($(RELEASE_PIXEL_BROADCAST_ENABLED), true) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.profile.bap.broadcast.assist.enabled=true \ |
| bluetooth.profile.bap.broadcast.source.enabled=true |
| endif |
| |
| # LE Audio switcher in developer options |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.leaudio_switcher.supported=true \ |
| |
| # Enable hardware offloading |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.leaudio_offload.supported=true \ |
| persist.bluetooth.leaudio_offload.disabled=false |
| |
| # Bluetooth LE Audio CIS handover to SCO |
| # Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in |
| # b/242908683. |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.leaudio.notify.idle.during.call=true |
| |
| # LE Audio Offload Capabilities setting |
| PRODUCT_COPY_FILES += \ |
| device/google/caimito/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml |
| |
| # Disable LE Audio dual mic SWB call support |
| # This may depend on the BT controller capability or the launch strategy |
| # For example, P22 BT chip is not able to support 32k dual mic |
| # P23a disabled the 32k dual mic as it is not in the phase 2 launch plan |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.leaudio.dual_bidirection_swb.supported=true |
| |
| # LE Audio Unicast Allowlist |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.leaudio.allow_list=SM-R510,WF-1000XM5 |
| |
| # Telephony Satellite Feature |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.telephony.satellite.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/permissions/android.hardware.telephony.satellite.xml |
| |
| # Battery Mitigation Config |
| ifeq (,$(TARGET_VENDOR_BATTERY_MITIGATION_CONFIG_PATH)) |
| TARGET_VENDOR_BATTERY_MITIGATION_CONFIG_PATH := device/google/comet/battery_mitigation |
| endif |
| |
| PRODUCT_COPY_FILES += \ |
| $(TARGET_VENDOR_BATTERY_MITIGATION_CONFIG_PATH)/bm_config_comet.json:$(TARGET_COPY_OUT_VENDOR)/etc/bm_config.json |
| |
| # Exynos RIL and telephony |
| # Support RIL Domain-selection |
| SUPPORT_RIL_DOMAIN_SELECTION := true |
| |
| # ETM |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| $(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk) |
| endif |
| |
| # Connectivity Resources Overlay for Thread host settings |
| PRODUCT_PACKAGES += \ |
| ConnectivityResourcesOverlayCometOverride |
| |
| # Thread Dispatcher enablement in Bluetooth HAL |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.thread_dispatcher.enabled=false |
| |
| # Camera concurrent foldable dual front feature support |
| PRODUCT_PACKAGES += \ |
| concurrent_foldable_dual_front_xml |
| |
| # Bluetooth device id |
| # Comet: 0x4113 |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.device_id.product_id=16659 |
| |
| # Set support for LEA multicodec |
| PRODUCT_PRODUCT_PROPERTIES +=\ |
| bluetooth.core.le_audio.codec_extension_aidl.enabled=true |
| |
| # LE Audio configuration scenarios |
| PRODUCT_COPY_FILES += \ |
| device/google/comet/bluetooth/audio_set_scenarios.json:$(TARGET_COPY_OUT_VENDOR)/etc/aidl/le_audio/aidl_audio_set_scenarios.json |
| |
| PRODUCT_COPY_FILES += \ |
| device/google/comet/bluetooth/audio_set_configurations.json:$(TARGET_COPY_OUT_VENDOR)/etc/aidl/le_audio/aidl_audio_set_configurations.json |
