Remove common part to common folder
also move uncommon part to right place
Bug: 140363359
Change-Id: I74675782a643febd91bc992c48f689a206d319c2
diff --git a/BoardConfig-common.mk b/BoardConfig-common.mk
deleted file mode 100644
index f25aecc..0000000
--- a/BoardConfig-common.mk
+++ /dev/null
@@ -1,252 +0,0 @@
-#
-# Copyright (C) 2016 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-include build/make/target/board/BoardConfigMainlineCommon.mk
-
-TARGET_BOARD_PLATFORM := lito
-TARGET_BOARD_INFO_FILE := device/google/bramble/board-info.txt
-USES_DEVICE_GOOGLE_BRAMBLE := true
-TARGET_ARCH := arm64
-TARGET_ARCH_VARIANT := armv8-2a
-TARGET_CPU_ABI := arm64-v8a
-TARGET_CPU_ABI2 :=
-TARGET_CPU_VARIANT := cortex-a76
-
-TARGET_2ND_ARCH := arm
-TARGET_2ND_ARCH_VARIANT := armv8-a
-TARGET_2ND_CPU_ABI := armeabi-v7a
-TARGET_2ND_CPU_ABI2 := armeabi
-TARGET_2ND_CPU_VARIANT := cortex-a76
-
-BUILD_BROKEN_ENG_DEBUG_TAGS := true
-
-TARGET_BOARD_COMMON_PATH := device/google/bramble/sm7250
-
-BOARD_KERNEL_CMDLINE += console=ttyMSM0,115200n8 androidboot.console=ttyMSM0 printk.devkmsg=on
-BOARD_KERNEL_CMDLINE += msm_rtb.filter=0x237
-BOARD_KERNEL_CMDLINE += ehci-hcd.park=3
-BOARD_KERNEL_CMDLINE += service_locator.enable=1
-BOARD_KERNEL_CMDLINE += androidboot.memcg=1 cgroup.memory=nokmem
-BOARD_KERNEL_CMDLINE += lpm_levels.sleep_disabled=1 # STOPSHIP b/113233473
-BOARD_KERNEL_CMDLINE += usbcore.autosuspend=7
-BOARD_KERNEL_CMDLINE += androidboot.usbcontroller=a600000.dwc3 swiotlb=2048
-BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive # STOPSHIP b/113232677
-BOARD_KERNEL_CMDLINE += androidboot.boot_devices=soc/1d84000.ufshc
-BOARD_KERNEL_CMDLINE += loop.max_part=7
-
-BOARD_KERNEL_BASE := 0x00000000
-BOARD_KERNEL_PAGESIZE := 4096
-
-BOARD_INCLUDE_DTB_IN_BOOTIMG := true
-BOARD_BOOT_HEADER_VERSION := 2
-BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)
-
-# DTBO partition definitions
-BOARD_PREBUILT_DTBOIMAGE := device/google/bramble-kernel/dtbo.img
-BOARD_DTBOIMG_PARTITION_SIZE := 8388608
-
-TARGET_NO_KERNEL := false
-BOARD_USES_RECOVERY_AS_BOOT := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
-BOARD_USES_METADATA_PARTITION := true
-
-AB_OTA_UPDATER := true
-
-AB_OTA_PARTITIONS += \
- boot \
- system \
- vbmeta \
- dtbo \
- product
-
-# Partitions (listed in the file) to be wiped under recovery.
-TARGET_RECOVERY_WIPE := device/google/bramble/recovery.wipe
-TARGET_RECOVERY_FSTAB := device/google/bramble/fstab.hardware
-TARGET_RECOVERY_PIXEL_FORMAT := RGBX_8888
-TARGET_RECOVERY_UI_LIB := \
- librecovery_ui_bramble \
- libnos_citadel_for_recovery \
- libnos_for_recovery
-
-# Enable chain partition for system.
-BOARD_AVB_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
-BOARD_AVB_SYSTEM_ALGORITHM := SHA256_RSA2048
-BOARD_AVB_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
-BOARD_AVB_SYSTEM_ROLLBACK_INDEX_LOCATION := 1
-
-# product.img
-BOARD_PRODUCTIMAGE_PARTITION_SIZE := 2147483648
-BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE := ext4
-
-# system.img
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
-BOARD_SYSTEMIMAGE_JOURNAL_SIZE := 0
-BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT := 4096
-
-# userdata.img
-TARGET_USERIMAGES_USE_F2FS := true
-BOARD_USERDATAIMAGE_PARTITION_SIZE := 10737418240
-BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := f2fs
-
-# persist.img
-BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432
-BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
-
-# boot.img
-BOARD_BOOTIMAGE_PARTITION_SIZE := 0x04000000
-
-BOARD_FLASH_BLOCK_SIZE := 131072
-
-BOARD_ROOT_EXTRA_SYMLINKS := /vendor/lib/dsp:/dsp
-BOARD_ROOT_EXTRA_SYMLINKS += /mnt/vendor/persist:/persist
-
-include device/google/bramble-sepolicy/bramble-sepolicy.mk
-
-TARGET_FS_CONFIG_GEN := device/google/bramble/config.fs
-
-QCOM_BOARD_PLATFORMS += lito
-QC_PROP_ROOT := vendor/qcom/sm7250/proprietary
-QC_PROP_PATH := $(QC_PROP_ROOT)
-BOARD_HAVE_BLUETOOTH_QCOM := true
-BOARD_HAVE_QCOM_FM := false
-BOARD_USES_COMMON_BLUETOOTH_HAL := true
-
-# Camera
-TARGET_USES_AOSP := true
-BOARD_QTI_CAMERA_32BIT_ONLY := false
-CAMERA_DAEMON_NOT_PRESENT := true
-TARGET_USES_ION := true
-
-# GPS
-TARGET_NO_RPC := true
-TARGET_USES_HARDWARE_QCOM_GPS := false
-BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := default
-BOARD_VENDOR_QCOM_LOC_PDK_FEATURE_SET := true
-
-# RenderScript
-OVERRIDE_RS_DRIVER := libRSDriver_adreno.so
-
-# Sensors
-USE_SENSOR_MULTI_HAL := true
-TARGET_SUPPORT_DIRECT_REPORT := true
-# Enable sensor Version V_2
-USE_SENSOR_HAL_VER := 2.0
-
-# wlan
-BOARD_WLAN_DEVICE := qcwcn
-BOARD_WPA_SUPPLICANT_DRIVER := NL80211
-BOARD_HOSTAPD_DRIVER := NL80211
-WIFI_DRIVER_DEFAULT := qca_cld3
-WPA_SUPPLICANT_VERSION := VER_0_8_X
-BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
-BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
-WIFI_HIDL_FEATURE_AWARE := true
-WIFI_HIDL_FEATURE_DUAL_INTERFACE:= true
-
-# Audio
-BOARD_USES_ALSA_AUDIO := true
-AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
-AUDIO_FEATURE_ENABLED_SND_MONITOR := true
-AUDIO_FEATURE_ENABLED_USB_TUNNEL := true
-#AUDIO_FEATURE_ENABLED_CIRRUS_SPKR_PROTECTION := true
-BOARD_SUPPORTS_SOUND_TRIGGER := true
-AUDIO_FEATURE_FLICKER_SENSOR_INPUT := true
-SOUND_TRIGGER_FEATURE_LPMA_ENABLED := true
-AUDIO_FEATURE_ENABLED_MAXX_AUDIO := true
-AUDIO_FEATURE_ENABLED_24BITS_CAMCORDER := true
-AUDIO_FEATURE_ENABLED_AUDIO_ZOOM := true
-AUDIO_FEATURE_ENABLED_INSTANCE_ID := true
-
-# Audio hal flag
-TARGET_USES_HARDWARE_QCOM_AUDIO := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_PLATFORM_8974 := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_POSTPROC := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_VOLUME_LISTENER := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_GET_MMAP_DATA_FD := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_APP_TYPE_CFG := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_ACDB_INIT_V2_CVD := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_MAX_TARGET_SPECIFIC_CHANNEL_CNT := "4"
-TARGET_USES_HARDWARE_QCOM_AUDIO_INCALL_MUSIC_ENABLED := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_MULTIPLE_HW_VARIANTS_ENABLED := true
-TARGET_USES_HARDWARE_QCOM_AUDIO_INCALL_STEREO_CAPTURE_ENABLED := true
-
-# Graphics
-TARGET_USES_GRALLOC1 := true
-TARGET_USES_HWC2 := true
-
-VSYNC_EVENT_PHASE_OFFSET_NS := 2000000
-SF_VSYNC_EVENT_PHASE_OFFSET_NS := 6000000
-
-# Display
-TARGET_USES_DISPLAY_RENDER_INTENTS := true
-TARGET_USES_COLOR_METADATA := true
-TARGET_USES_DRM_PP := true
-
-# Misc
-TARGET_USES_HARDWARE_QCOM_BOOTCTRL := true
-
-
-# Vendor Interface Manifest
-DEVICE_MANIFEST_FILE := device/google/bramble/manifest.xml
-DEVICE_MATRIX_FILE := device/google/bramble/compatibility_matrix.xml
-DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE := device/google/bramble/device_framework_matrix.xml
-DEVICE_FRAMEWORK_MANIFEST_FILE := device/google/bramble/framework_manifest.xml
-
-# Use mke2fs to create ext4 images
-TARGET_USES_MKE2FS := true
-
-BOARD_EXT4_SHARE_DUP_BLOCKS := true
-
-# Kernel modules
-ifeq (,$(filter-out bramble_kasan, $(TARGET_PRODUCT)))
-BOARD_VENDOR_KERNEL_MODULES += \
- $(wildcard device/google/bramble-kernel/kasan/*.ko)
-else ifeq (,$(filter-out bramble_kernel_debug_memory, $(TARGET_PRODUCT)))
-BOARD_VENDOR_KERNEL_MODULES += \
- $(wildcard device/google/bramble-kernel/debug_memory/*.ko)
-else ifeq (,$(filter-out bramble_kernel_debug_locking, $(TARGET_PRODUCT)))
-BOARD_VENDOR_KERNEL_MODULES += \
- $(wildcard device/google/bramble-kernel/debug_locking/*.ko)
-else ifeq (,$(filter-out bramble_kernel_debug_hang, $(TARGET_PRODUCT)))
-BOARD_VENDOR_KERNEL_MODULES += \
- $(wildcard device/google/bramble-kernel/debug_hang/*.ko)
-else ifeq (,$(filter-out bramble_kernel_debug_api, $(TARGET_PRODUCT)))
-BOARD_VENDOR_KERNEL_MODULES += \
- $(wildcard device/google/bramble-kernel/debug_api/*.ko)
-else
-BOARD_VENDOR_KERNEL_MODULES += \
- $(wildcard device/google/bramble-kernel/*.ko)
-endif
-
-# DTB
-ifeq (,$(filter-out bramble_kasan, $(TARGET_PRODUCT)))
-BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/kasan
-else ifeq (,$(filter-out bramble_kernel_debug_memory, $(TARGET_PRODUCT)))
-BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/debug_memory
-else ifeq (,$(filter-out bramble_kernel_debug_locking, $(TARGET_PRODUCT)))
-BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/debug_locking
-else ifeq (,$(filter-out bramble_kernel_debug_hang, $(TARGET_PRODUCT)))
-BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/debug_hang
-else ifeq (,$(filter-out bramble_kernel_debug_api, $(TARGET_PRODUCT)))
-BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/debug_api
-else
-BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel
-endif
-
-# Testing related defines
-#BOARD_PERFSETUP_SCRIPT := platform_testing/scripts/perf-setup/b5-setup.sh
-
--include vendor/google_devices/bramble/proprietary/BoardConfigVendor.mk
diff --git a/CleanSpec.mk b/CleanSpec.mk
deleted file mode 100644
index 390a629..0000000
--- a/CleanSpec.mk
+++ /dev/null
@@ -1,90 +0,0 @@
-# Copyright 2018 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# If you don't need to do a full clean build but would like to touch
-# a file or delete some intermediate files, add a clean step to the end
-# of the list. These steps will only be run once, if they haven't been
-# run before.
-#
-# E.g.:
-# $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
-# $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
-#
-# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
-# files that are missing or have been moved.
-#
-# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
-# Use $(OUT_DIR) to refer to the "out" directory.
-#
-# If you need to re-do something that's already mentioned, just copy
-# the command and add it to the bottom of the list. E.g., if a change
-# that you made last week required touching a file and a change you
-# made today requires touching the same file, just copy the old
-# touch step and add it to the end of the list.
-#
-# ************************************************
-# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
-# ************************************************
-
-# For example:
-#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
-#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
-#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
-#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
-
-
-# Remove default android.hardware.health@2.0-service
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.health@2.0-service)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.health@2.0-service.rc)
-
-# Remove healthd
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/healthd)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/init/healthd.rc)
-
-# Move libnfc-nci.conf to /vendor
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/libnfc-nci.conf)
-
-# Remove /firmware which used to be a symlink to /vendor/firmware_mnt
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/firmware)
-
-# Remove thermalHAL 1.0
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.thermal@1.0-service.bramble.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.thermal@1.0-service.bramble)
-
-# Remove default android.hardware.composer@2.2
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.2-service)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.2-service.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.composer@2.2-impl.so)
-
-# Remove default android.hardware.graphics.composer@2.3-service
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.3-service)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.3-service.rc)
-
-# Remove super_empty.img
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/super_empty.img)
-
-# Remove Vibrator HAL 1.2
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.2-service.bramble.rc)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.2-service.bramble)
-
-# Remove Misnamed Vibrator VINTF Fragment
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/manifest.xml)
-
-# Rename power HAL
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.3-service.bramble-libperfmgr.rc)
-
-# Remove VR permission
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.vr.headtracking.xml)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.vr.high_performance.xml)
diff --git a/WCNSS_qcom_cfg.ini b/WCNSS_qcom_cfg.ini
deleted file mode 100644
index 24563f7..0000000
--- a/WCNSS_qcom_cfg.ini
+++ /dev/null
@@ -1,429 +0,0 @@
-# This file allows user to override the factory
-# defaults for the WLAN Driver
-
-#############################################
-# Power related configurations
-#############################################
-# Phy Mode (auto, b, g, n, etc)
-# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
-# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
-# 7 = 11b only 8 = 11ac only.
-gDot11Mode=0
-
-#############################################
-# STA related general configurations
-#############################################
-# UAPSD service interval for VO,VI, BE, BK traffic
-InfraUapsdVoSrvIntv=0
-InfraUapsdViSrvIntv=0
-InfraUapsdBeSrvIntv=0
-InfraUapsdBkSrvIntv=0
-
-# Flag to allow STA send AddTspec even when ACM is Off
-gAddTSWhenACMIsOff=1
-
-#############################################
-# SAP related configurations
-#############################################
-#Enable OBSS protection
-gEnableApOBSSProt=1
-
-# Maximum Tx power
-# gTxPowerCap=30
-
-# Fragmentation Threshold
-# gFragmentationThreshold=2346
-
-# RTS threshold
-RTSThreshold=1048576
-
-# 802.11d support
-g11dSupportEnabled=0
-
-# DFS Master Capability
-gEnableDFSMasterCap=1
-
-gNeighborLookupThreshold=76
-
-# Legacy (non-ESE, non-802.11r) Fast Roaming Support
-# To enable, set FastRoamEnabled=1
-# To disable, set FastRoamEnabled=0
-FastRoamEnabled=1
-
-# Check if the AP to which we are roaming is better than current AP in
-# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
-# use this value as to how better the RSSI of the new/roamable AP should
-# be for roaming
-RoamRssiDiff=3
-
-#Channel Bonding
-gChannelBondingMode5GHz=1
-
-#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
-#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
-#is idle for last 10 seconds.) For both active and power save clients.
-
-#Power save clients: DUT set TIM bit from 10th second onwards and till client
-#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
-
-#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
-#success still we try on 11th second if not tries on 12th and so on till 15th
-#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
-#case DUT will detect client got removed in (10+5) seconds.
-#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
-
-#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
-#it is period where we send NULL frame.
-#gApLinkMonitorPeriod = 10
-#gGoLinkMonitorPeriod = 10
-
-# Enable DFS channel roam
-# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
-gAllowDFSChannelRoam=1
-
-# chain mask related params
-#
-# Set txchainmask and rxchainmask
-# These parameters are used only if gEnable2x2 is 0
-# Valid values are 1,2
-# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
-# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
-gSetTxChainmask1x1=1
-gSetRxChainmask1x1=1
-
-# MCC to SCC Switch mode:
-# 0-Disable
-# 1-Enable
-# 2-Force SCC if same band, with SAP restart
-# 3-Force SCC if same band, without SAP restart by sending (E)CSA
-# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
-# without SAP restart by sending (E)CSA
-gWlanMccToSccSwitchMode = 3
-
-# 1=enable tx STBC; 0=disable
-gEnableTXSTBC=1
-
-# 1=enable rx LDPC; 0=disable
-gEnableRXLDPC=1
-
-#Enable/Disable Tx beamformee in SAP mode
-gEnableTxBFeeSAP=1
-
-# Enable Tx beamforming in VHT20MHz
-# Valid values are 0,1. If commented out, the default value is 0.
-# 0=disable, 1=enable
-gEnableTxBFin20MHz=1
-
-# 802.11K support
-gRrmEnable=1
-
-#Enable Power Save offload
-gEnablePowerSaveOffload=2
-
-# Maximum Receive AMPDU size (VHT only. Valid values:
-# 0->8k 1->16k 2->32k 3->64k 4->128k)
-gVhtAmpduLenExponent=7
-
-# Maximum MPDU length (VHT only. Valid values:
-# 0->3895 octets, 1->7991 octets, 2->11454 octets)
-gVhtMpduLen=2
-
-# Maximum number of wow filters required
-#gMaxWoWFilters=22
-
-# WOW Enable/Disable.
-# 0 - Disable both magic pattern match and pattern byte match.
-# 1 - Enable magic pattern match on all interfaces.
-# 2 - Enable pattern byte match on all interfaces.
-# 3 - Enable both magic pattern and pattern byte match on all interfaces.
-# Default value of gEnableWoW is 3.
-# gEnableWoW=0
-
-#############################################
-# P2P related configurations
-#############################################
-#Enable or Disable p2p device address administered
-isP2pDeviceAddrAdministrated=0
-
-# Set Thermal Power limit
-TxPower2g=10
-TxPower5g=10
-
-#Enable VHT on 2.4Ghz
-gEnableVhtFor24GHzBand=1
-
-#############################################
-# Offload related configurations
-#############################################
-#Maximum number of offload peers supported
-# gMaxOffloadPeers=2
-
-# controlling the following offload patterns
-# through ini parameter. Default value is 1
-# to disable set it to zero. ssdp = 0
-# Setup multicast pattern for mDNS 224.0.0.251,
-# SSDP 239.255.255.250 and LLMNR 224.0.0.252
-ssdp=0
-
-# Regulatory Setting; 0=STRICT; 1=CUSTOM
-gRegulatoryChangeCountry=1
-
-# RA filtering rate limit param, the current value would not
-# help if the lifetime in RA is less than 3*60=3min. Then
-# we need to change it, though it is uncommon.
-# gRAFilterEnable=0
-gRArateLimitInterval=600
-
-# Disable/Enable GreenAP
-# 0 to disable, 1 to enable, default: 1
-gEnableGreenAp=0
-
-#Enable/Disable LPASS support
-# 0 to disable, 1 to enable
-gEnableLpassSupport=1
-
-# Whether userspace country code setting shld have priority
-gCountryCodePriority=1
-
-# Enable or Disable Multi-user MIMO
-# 1=Enable (default), 0=Disable
-gEnableMuBformee=1
-
-# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
-gIbssTxSpEndInactivityTime=10
-
-#############################################
-# TDLS related configurations
-#############################################
-# Enable support for TDLS
-# 0 - disable
-# 1 - enable
-gEnableTDLSSupport=1
-
-# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
-# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
-# and RSSI) is met and then will initiate teardown when teardown criteria
-# (idle packet count and RSSI) is met.
-# 0 - disable
-# 1 - enable
-gEnableTDLSImplicitTrigger=1
-
-# Enable support for TDLS off-channel operation
-# 0 - disable
-# 1 - enable
-# TDLS off-channel operation will be invoked when there is only one
-# TDLS connection.
-gEnableTDLSOffChannel=1
-
-# Tx/Rx Packet threshold for initiating TDLS.
-# This ini is used to configure the number of Tx/Rx packets during the period of
-# gTDLSTxStatsPeriod when exceeded, a TDLS Discovery request is triggered.
-gTDLSTxPacketThreshold=10
-
-# Number of idle packet.
-# This ini is used to configure the number of Tx/Rx packet, below which
-# within last gTDLSTxStatsPeriod period is considered as idle condition.
-gTDLSIdlePacketThreshold=1
-
-# VHT Tx/Rx MCS values
-# Valid values are 0,1,2. If commented out, the default value is 0.
-# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
-gVhtRxMCS=2
-gVhtTxMCS=2
-
-# VHT Tx/Rx MCS values for 2x2
-# Valid values are 0,1,2. If commented out, the default value is 0.
-# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
-gEnable2x2=1
-gVhtRxMCS2x2=2
-gVhtTxMCS2x2=2
-
-#IPA config is a bit mask and following are the configurations.
-#bit0 IPA Enable
-#bit1 IPA PRE Filter enable
-#bit2 IPv6 enable
-#bit3 IPA Resource Manager (RM) enable
-#bit4 IPA Clock scaling enable
-#bit5 IPA uC ENABLE
-#bit6 IPA uC STA ENABLE
-#bit8 IPA Real Time Debugging
-gIPAConfig=0x7d
-
-# Enable Rx handling options
-# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
-# Rx_thread + NAPI = 5
-rx_mode=5
-
-# Enable(Tx) fastpath for data traffic.
-# 1 - enable(default) 0 - disable
-gEnableFastPath=1
-
-# Enable TCP Segmentation Offload
-# 1 - enable 0 - disable
-TSOEnable=1
-
-# Enable Generic Receive Offload
-# LRO and GRO are exclusive to each other
-# LRO support is deprecated on latest 4.9(SDM845) kernel
-# 1 - enable(default) 0 - disable
-GROEnable=1
-
-# Enable HT MPDU Density
-# 4 for 2 micro sec
-ght_mpdu_density=4
-
-# Enable flow steering to enable multiple CEs for Rx flows.
-# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
-# Parallel Rx paths.
-# 1 - enable 0 - disable(default)
-gEnableFlowSteering=1
-
-# Time in microseconds after which a NAPI poll must yield
-ce_service_max_yield_time=500
-
-#Maximum number of HTT messages to be processed per NAPI poll
-ce_service_max_rx_ind_flush=1
-
-# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
-maxMSDUsPerRxInd=8
-################ Datapath feature set End ################
-
-################ NAN feature set start ###################
-
-# Enable NAN discovery (NAN 1.0)
-# 1 - enable 0 - disable(default)
-gEnableNanSupport=1
-################ NAN feature set end #####################
-
-hostscan_adaptive_dwell_mode=1
-
-# Create another interface during driver load
-gEnableConcurrentSTA=wlan1
-
-#Enable/Disable dual MAC feature
-# 0 - enable DBS
-# 1 - disable DBS
-# 2 - disable DBS for connection but keep DBS for scan
-# 3 - disable DBS for connection but keep DBS scan with async
-# scan policy disabled
-# 4 - enable DBS for connection as well as for scan with async
-# scan policy disabled
-# 5 - enable DBS for connection but disable dbs for scan.
-# 6 - enable DBS for connection but disable simultaneous scan from
-# upper layer (DBS scan remains enabled in FW).
-gDualMacFeatureDisable=6
-
-#Enable/Disable latency mode
-# 0 disable
-# 1 enable
-wlm_latency_enable=1
-
-# Enable/Disable NUD Tracking within driver
-gEnableNUDTracking=0
-
-# Configure hardware filter for DTIM mode
-# The hardware filter is only effective in DTIM mode.
-# Use this configuration to blanket drop broadcast/multicast packets at the hardware level
-# without waking up the firmware
-#
-# Takes a bitmap of frame types to drop
-#
-# 0 = disable feature
-# 1 = drop all broadcast frames, except ARP (default)
-# 2 = drop all multicast frames, except ICMPv6
-# 3 = drop all broadcast and multicast frames, except ARP and ICMPv6
-gHwFilterMode=0
-
-# Enables SNR Monitoring
-# This ini is used to set default snr monitor
-gEnableSNRMonitoring=1
-
-# Control to enable TCP limit output byte
-# This ini is used to enable dynamic configuration of TCP limit output bytes
-# tcp_limit_output_bytes param.
-# Enabling this will let driver post message to cnss-daemon,
-# accordingly cnss-daemon will modify the tcp_limit_output_bytes.
-gTcpLimitOutputEnable=0
-
-# Enable Target Wake Time support.
-# This ini is used to enable or disable TWT support.
-enable_twt=0
-
-# For NLO/PNO, enable MAWC based scan
-# Enable/Disable the Motion Aided Wireless Connectivity based NLO using this parameter
-mawc_nlo_enabled=0
-
-# Force 1x1 when connecting to certain peer
-# This INI when enabled will force 1x1 connection with certain peer.
-gForce1x1Exception=0
-
-# Enable/disable oce feature for STA
-# This ini is used to enable/disable oce feature for STA
-oce_sta_enable=0
-
-# Enable/disable oce feature for SAP
-# This ini is used to enable/disable oce feature for SAP
-oce_sap_enable=0
-
-# Set probe request rate
-# This ini is used to set probe request rate to 5.5Mbps as per OCE requirement in 2.4G band
-oce_enable_probe_req_rate=0
-
-# HE caps Weightage to calculate best candidate
-# This ini is used to increase/decrease HE caps weightage in best candidate selection.
-# If AP supports HE caps, AP will get additional weightage with this param.
-# Weightage will be given only if dot11mode is HE capable.
-he_caps_weightage=0
-
-# PCL Weightage to calculate best candidate
-# This ini is used to increase/decrease PCL weightage in best candidate selection.
-# If some APs are in PCL list, those AP will get addition weightage.
-pcl_weightage=0
-
-# Enable/disable esp feature
-# This ini is used to enable/disable ESP(Estimated service parameters) IE parsing and decides
-# whether firmware will include this in its scoring algo.
-enable_esp_for_roam=0
-
-# Bitmask to enable 11k offload to FW.
-# This ini is used to set which of the 11k features is offloaded to FW
-# Currently Neighbor Report Request is supported for offload and is enabled by default.
-# B0: Offload 11k neighbor report requests
-# B1-B31: Reserved
-11k_offload_enable_bitmask=0
-
-# Set channel selection logic for different concurrency combinations to DBS or inter band MCC.
-# Default is DBS for STA+STA and STA+P2P.
-# 0 - inter-band MCC
-# 1 - DBS
-#
-# BIT 0: STA+STA
-# BIT 1: STA+P2P
-# BIT 2-31: Reserved
-channel_select_logic_conc=0
-
-# Configure BTM
-# Bit 0: Enable/Disable the BTM offload. Set this to 1 will enable and 0 will disable BTM offload.
-# BIT 2, 1: Action on non matching candidate with cache. If a BTM request is received from AP
-# then the candidate AP's may/may-not be present in the firmware scan cache.
-# Based on below config firmware will decide whether to forward BTM frame to host or
-# consume with firmware and proceed with Roaming to candidate AP.
-#
-# 00 scan and consume
-# 01 no scan and forward to host
-# 10, 11 reserved
-# BIT 5, 4, 3: Roaming handoff decisions on multiple candidates match
-# 000 match if exact BSSIDs are found
-# 001 match if at least one top priority BSSID only
-# 010, 011, 100, 101, 110, 111 reserved
-# BIT 6: Set this to 1 will send BTM query frame and 0 not sent.
-# BIT 7-31: Reserved
-btm_offload_config=0
-
-#Timer waiting for interface up from the upper layer
-gInterfaceChangeWait=1000
-
-END
-
-# Note: Configuration parser would not read anything past the END marker
-
diff --git a/audio/acdbdata/Bluetooth_cal.acdb b/audio/acdbdata/Bluetooth_cal.acdb
deleted file mode 100644
index be9007c..0000000
--- a/audio/acdbdata/Bluetooth_cal.acdb
+++ /dev/null
Binary files differ
diff --git a/audio/acdbdata/General_cal.acdb b/audio/acdbdata/General_cal.acdb
deleted file mode 100644
index 5b7455b..0000000
--- a/audio/acdbdata/General_cal.acdb
+++ /dev/null
Binary files differ
diff --git a/audio/acdbdata/Global_cal.acdb b/audio/acdbdata/Global_cal.acdb
deleted file mode 100644
index 76f8a84..0000000
--- a/audio/acdbdata/Global_cal.acdb
+++ /dev/null
Binary files differ
diff --git a/audio/acdbdata/Handset_cal.acdb b/audio/acdbdata/Handset_cal.acdb
deleted file mode 100644
index 36fda6f..0000000
--- a/audio/acdbdata/Handset_cal.acdb
+++ /dev/null
Binary files differ
diff --git a/audio/acdbdata/Hdmi_cal.acdb b/audio/acdbdata/Hdmi_cal.acdb
deleted file mode 100644
index f0cf359..0000000
--- a/audio/acdbdata/Hdmi_cal.acdb
+++ /dev/null
Binary files differ
diff --git a/audio/acdbdata/Headset_cal.acdb b/audio/acdbdata/Headset_cal.acdb
deleted file mode 100644
index a96c6d5..0000000
--- a/audio/acdbdata/Headset_cal.acdb
+++ /dev/null
Binary files differ
diff --git a/audio/acdbdata/Speaker_cal.acdb b/audio/acdbdata/Speaker_cal.acdb
deleted file mode 100644
index 8ecfc2c..0000000
--- a/audio/acdbdata/Speaker_cal.acdb
+++ /dev/null
Binary files differ
diff --git a/audio/acdbdata/adsp_avs_config.acdb b/audio/acdbdata/adsp_avs_config.acdb
deleted file mode 100644
index 1e9f933..0000000
--- a/audio/acdbdata/adsp_avs_config.acdb
+++ /dev/null
Binary files differ
diff --git a/audio/acdbdata/workspaceFile.qwsp b/audio/acdbdata/workspaceFile.qwsp
deleted file mode 100644
index 9b258ce..0000000
--- a/audio/acdbdata/workspaceFile.qwsp
+++ /dev/null
Binary files differ
diff --git a/audio/audio_configs.xml b/audio/audio_configs.xml
deleted file mode 100644
index 271023d..0000000
--- a/audio/audio_configs.xml
+++ /dev/null
@@ -1,114 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!--
-Copyright (c) 2019, The Linux Foundation. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above
- copyright notice, this list of conditions and the following
- disclaimer in the documentation and/or other materials provided
- with the distribution.
- * Neither the name of The Linux Foundation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--->
-<configs>
- <!-- APM Configs -->
- <property name="audio.deep_buffer.media" value="true"/>
- <property name="audio.offload.disable" value="false"/>
- <property name="audio.offload.min.duration.secs" value="30"/>
- <property name="audio.offload.video" value="true"/>
- <property name="persist.vendor.audio.sva.conc.enabled" value="false"/>
- <property name="persist.vendor.audio.va_concurrency_enabled" value="false"/>
- <property name="vendor.audio.av.streaming.offload.enable" value="false"/>
- <property name="vendor.audio.offload.track.enable" value="true"/>
- <property name="vendor.audio.offload.multiple.enabled" value="false"/>
- <property name="vendor.audio.rec.playback.conc.disabled" value="false"/>
- <property name="vendor.voice.conc.fallbackpath" value=""/>
- <property name="vendor.voice.dsd.playback.conc.disabled" value="true"/>
- <property name="vendor.voice.path.for.pcm.voip" value="true"/>
- <property name="vendor.voice.playback.conc.disabled" value="false"/>
- <property name="vendor.voice.record.conc.disabled" value="false"/>
- <property name="vendor.voice.voip.conc.disabled" value="false"/>
- <flag name="audio_extn_formats_enabled" value="true" />
- <flag name="audio_extn_hdmi_spk_enabled" value="true" />
- <flag name="use_xml_audio_policy_conf" value="true" />
- <flag name="voice_concurrency" value="false" />
-
- <!-- AV Configs -->
- <property name="vendor.audio.use.sw.alac.decoder" value="true"/>
- <property name="vendor.audio.use.sw.ape.decoder" value="true"/>
- <property name="vendor.audio.use.sw.mpegh.decoder" value="false"/>
- <property name="vendor.audio.flac.sw.decoder.24bit" value="true"/>
- <property name="vendor.audio.hw.aac.encoder" value="true"/>
- <flag name="aac_adts_offload_enabled" value="true" />
- <flag name="alac_offload_enabled" value="true" />
- <flag name="ape_offload_enabled" value="true" />
- <flag name="flac_offload_enabled" value="true" />
- <flag name="pcm_offload_enabled_16" value="true" />
- <flag name="pcm_offload_enabled_24" value="true" />
- <flag name="qti_flac_decoder" value="true" />
- <flag name="vorbis_offload_enabled" value="true" />
- <flag name="wma_offload_enabled" value="true" />
-
- <!-- AHAL Configs -->
- <flag name="a2dp_offload_enabled" value="true" />
- <flag name="anc_headset_enabled" value="true" />
- <flag name="audiosphere_enabled" value="true" />
- <flag name="audio_zoom_enabled" value="false" />
- <flag name="battery_listener_enabled" value="true" />
- <flag name="compress_capture_enabled" value="false" />
- <flag name="compress_in_enabled" value="true" />
- <flag name="compress_metadata_needed" value="true" />
- <flag name="concurrent_capture_enabled" value="true" />
- <flag name="custom_stereo_enabled" value="true" />
- <flag name="display_port_enabled" value="true" />
- <flag name="dsm_feedback_enabled" value="false" />
- <flag name="dynamic_ecns_enabled" value="true" />
- <flag name="ext_hw_plugin_enabled" value="true" />
- <flag name="ext_qdsp_enabled" value="false" />
- <flag name="ext_spkr_enabled" value="false" />
- <flag name="ext_spkr_tfa_enabled" value="false" />
- <flag name="fluence_enabled" value="true" />
- <flag name="hdmi_edid_enabled" value="true" />
- <flag name="hdmi_passthrough_enabled" value="true" />
- <flag name="hfp_enabled" value="true" />
- <flag name="hifi_audio_enabled" value="false" />
- <flag name="hwdep_cal_enabled" value="false" />
- <flag name="incall_music_enabled" value="true" />
- <flag name="keep_alive_enabled" value="true" />
- <flag name="kpi_optimize_enabled" value="true" />
- <flag name="maxx_audio_enabled" value="false" />
- <flag name="receiver_aided_stereo" value="true" />
- <flag name="snd_monitor_enabled" value="true" />
- <flag name="source_track_enabled" value="true" />
- <flag name="spkr_prot_enabled" value="true" />
- <flag name="ssrec_enabled" value="true" />
- <flag name="usb_offload_burst_mode" value="true" />
- <flag name="usb_offload_enabled" value="true" />
- <flag name="usb_offload_sidetone_vol_enabled" value="false" />
- <flag name="use_deep_buffer_as_primary_output" value="false" />
- <flag name="vbat_enabled" value="true" />
- <flag name="wsa_enabled" value="false" />
-
- <!-- Common configs between APM and AHAL -->
- <flag name="afe_proxy_enabled" value="true" />
- <flag name="compress_voip_enabled" value="false" />
- <flag name="fm_power_opt" value="true" />
- <flag name="record_play_concurrency" value="false" />
-</configs>
diff --git a/audio/audio_effects.xml b/audio/audio_effects.xml
deleted file mode 100644
index b6e318e..0000000
--- a/audio/audio_effects.xml
+++ /dev/null
@@ -1,119 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--- Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. -->
-<!--- -->
-<!--- Redistribution and use in source and binary forms, with or without -->
-<!--- modification, are permitted provided that the following conditions are -->
-<!--- met: -->
-<!--- * Redistributions of source code must retain the above copyright -->
-<!--- notice, this list of conditions and the following disclaimer. -->
-<!--- * Redistributions in binary form must reproduce the above -->
-<!--- copyright notice, this list of conditions and the following -->
-<!--- disclaimer in the documentation and/or other materials provided -->
-<!--- with the distribution. -->
-<!--- * Neither the name of The Linux Foundation nor the names of its -->
-<!--- contributors may be used to endorse or promote products derived -->
-<!--- from this software without specific prior written permission. -->
-<!--- -->
-<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
-<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
-<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
-<!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
-<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
-<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
-<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
-<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
-<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -->
-<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
-<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
-
-<audio_effects_conf version="2.0" xmlns="http://schemas.android.com/audio/audio_effects_conf/v2_0">
- <libraries>
- <library name="bundle" path="libbundlewrapper.so"/>
- <library name="reverb" path="libreverbwrapper.so"/>
- <library name="qcbassboost" path="libqcbassboost.so"/>
- <library name="qcvirt" path="libqcvirt.so"/>
- <library name="qcreverb" path="libqcreverb.so"/>
- <library name="visualizer_sw" path="libvisualizer.so"/>
- <library name="visualizer_hw" path="libqcomvisualizer.so"/>
- <library name="downmix" path="libdownmix.so"/>
- <library name="loudness_enhancer" path="libldnhncr.so"/>
- <library name="dynamics_processing" path="libdynproc.so"/>
- <library name="proxy" path="libeffectproxy.so"/>
- <library name="offload_bundle" path="libqcompostprocbundle.so"/>
- <library name="audio_pre_processing" path="libqcomvoiceprocessing.so"/>
- <library name="volume_listener" path="libvolumelistener.so"/>
- <library name="audiosphere" path="libasphere.so"/>
- <library name="shoebox" path="libshoebox.so"/>
- </libraries>
- <effects>
- <effectProxy name="bassboost" library="proxy" uuid="14804144-a5ee-4d24-aa88-0002a5d5c51b">
- <libsw library="qcbassboost" uuid="23aca180-44bd-11e2-bcfd-0800200c9a66"/>
- <libhw library="offload_bundle" uuid="2c4a8c24-1581-487f-94f6-0002a5d5c51b"/>
- </effectProxy>
- <effectProxy name="virtualizer" library="proxy" uuid="d3467faa-acc7-4d34-acaf-0002a5d5c51b">
- <libsw library="qcvirt" uuid="e6c98a16-22a3-11e2-b87b-f23c91aec05e"/>
- <libhw library="offload_bundle" uuid="509a4498-561a-4bea-b3b1-0002a5d5c51b"/>
- </effectProxy>
- <effectProxy name="equalizer" library="proxy" uuid="c8e70ecd-48ca-456e-8a4f-0002a5d5c51b">
- <libsw library="bundle" uuid="ce772f20-847d-11df-bb17-0002a5d5c51b"/>
- <libhw library="offload_bundle" uuid="a0dac280-401c-11e3-9379-0002a5d5c51b"/>
- </effectProxy>
- <effect name="volume" library="bundle" uuid="119341a0-8469-11df-81f9-0002a5d5c51b"/>
- <effectProxy name="reverb_env_aux" library="proxy" uuid="48404ac9-d202-4ccc-bf84-0002a5d5c51b">
- <libsw library="qcreverb" uuid="a8c1e5f3-293d-43cd-95ec-d5e26c02e217"/>
- <libhw library="offload_bundle" uuid="79a18026-18fd-4185-8233-0002a5d5c51b"/>
- </effectProxy>
- <effectProxy name="reverb_env_ins" library="proxy" uuid="b707403a-a1c1-4291-9573-0002a5d5c51b">
- <libsw library="qcreverb" uuid="791fff8b-8129-4655-83a4-59bc61034c3a"/>
- <libhw library="offload_bundle" uuid="eb64ea04-973b-43d2-8f5e-0002a5d5c51b"/>
- </effectProxy>
- <effectProxy name="reverb_pre_aux" library="proxy" uuid="1b78f587-6d1c-422e-8b84-0002a5d5c51b">
- <libsw library="qcreverb" uuid="53ef1db5-c0c0-445b-b060-e34d20ebb70a"/>
- <libhw library="offload_bundle" uuid="6987be09-b142-4b41-9056-0002a5d5c51b"/>
- </effectProxy>
- <effectProxy name="reverb_pre_ins" library="proxy" uuid="f3e178d2-ebcb-408e-8357-0002a5d5c51b">
- <libsw library="qcreverb" uuid="b08a0e38-22a5-11e2-b87b-f23c91aec05e"/>
- <libhw library="offload_bundle" uuid="aa2bebf6-47cf-4613-9bca-0002a5d5c51b"/>
- </effectProxy>
- <effectProxy name="visualizer" library="proxy" uuid="1d0a1a53-7d5d-48f2-8e71-27fbd10d842c">
- <libsw library="visualizer_sw" uuid="d069d9e0-8329-11df-9168-0002a5d5c51b"/>
- <libhw library="visualizer_hw" uuid="7a8044a0-1a71-11e3-a184-0002a5d5c51b"/>
- </effectProxy>
- <effect name="downmix" library="downmix" uuid="93f04452-e4fe-41cc-91f9-e475b6d1d69f"/>
- <effect name="hw_acc" library="offload_bundle" uuid="7d1580bd-297f-4683-9239-e475b6d1d69f"/>
- <effect name="loudness_enhancer" library="loudness_enhancer" uuid="fa415329-2034-4bea-b5dc-5b381c8d1e2c"/>
- <effect name="dynamics_processing" library="dynamics_processing" uuid="e0e6539b-1781-7261-676f-6d7573696340"/>
- <effect name="aec" library="audio_pre_processing" uuid="0f8d0d2a-59e5-45fe-b6e4-248c8a799109"/>
- <effect name="ns" library="audio_pre_processing" uuid="1d97bb0b-9e2f-4403-9ae3-58c2554306f8"/>
- <effect name="music_helper" library="volume_listener" uuid="08b8b058-0590-11e5-ac71-0025b32654a0"/>
- <effect name="ring_helper" library="volume_listener" uuid="0956df94-0590-11e5-bdbe-0025b32654a0"/>
- <effect name="alarm_helper" library="volume_listener" uuid="09f303e2-0590-11e5-8fdb-0025b32654a0"/>
- <effect name="voice_helper" library="volume_listener" uuid="0ace5c08-0590-11e5-ae9e-0025b32654a0"/>
- <effect name="notification_helper" library="volume_listener" uuid="0b776dde-0590-11e5-81ba-0025b32654a0"/>
- <effect name="audiosphere" library="audiosphere" uuid="184e62ab-2d19-4364-9d1b-c0a40733866c"/>
- <effect name="shoebox" library="shoebox" uuid="1eab784c-1a36-4b2a-b7fc-e34c44cab89e"/>
- </effects>
- <postprocess>
- <stream type="music">
- <apply effect="music_helper"/>
- </stream>
- <stream type="ring">
- <apply effect="ring_helper"/>
- </stream>
- <stream type="alarm">
- <apply effect="alarm_helper"/>
- </stream>
- <stream type="voice_call">
- <apply effect="voice_helper"/>
- </stream>
- <stream type="notification">
- <apply effect="notification_helper"/>
- </stream>
- </postprocess>
- <preprocess>
- <stream type="voice_communication">
- <apply effect="aec"/>
- <apply effect="ns"/>
- </stream>
- </preprocess>
-</audio_effects_conf>
diff --git a/audio/audio_io_policy.conf b/audio/audio_io_policy.conf
deleted file mode 100644
index 7e00464..0000000
--- a/audio/audio_io_policy.conf
+++ /dev/null
@@ -1,105 +0,0 @@
-# List of profiles for the output device session where stream is routed.
-# A stream opened with the inputs attributes which match the "flags" and
-# "formats" as specified in the profile is routed to a device at
-# sample rate specified under "sampling_rates" and bit width under
-# "bit_width" and the topology extracted from the acdb data against
-# the "app_type".
-#
-# the flags and formats are specified using the strings corresponding to
-# enums in audio.h and audio_policy.h. They are concatenated with "|"
-# without space or "\n".
-# the flags and formats should match the ones in "audio_policy.conf"
-
-outputs {
- default {
- flags AUDIO_OUTPUT_FLAG_PRIMARY
- formats AUDIO_FORMAT_PCM_16_BIT
- sampling_rates 48000
- bit_width 16
- app_type 69937
- }
- proaudio {
- flags AUDIO_OUTPUT_FLAG_FAST|AUDIO_OUTPUT_FLAG_RAW
- formats AUDIO_FORMAT_PCM_16_BIT
- sampling_rates 48000
- bit_width 16
- app_type 69943
- }
- voip_rx {
- flags AUDIO_OUTPUT_FLAG_VOIP_RX|AUDIO_OUTPUT_FLAG_DIRECT
- formats AUDIO_FORMAT_PCM_16_BIT
- sampling_rates 8000|16000|32000|48000
- bit_width 16
- app_type 69946
- }
- deep_buffer {
- flags AUDIO_OUTPUT_FLAG_DEEP_BUFFER
- formats AUDIO_FORMAT_PCM_16_BIT
- sampling_rates 48000
- bit_width 16
- app_type 69936
- }
- direct_pcm_16 {
- flags AUDIO_OUTPUT_FLAG_DIRECT
- formats AUDIO_FORMAT_PCM_16_BIT|AUDIO_FORMAT_PCM_24_BIT_PACKED|AUDIO_FORMAT_PCM_8_24_BIT|AUDIO_FORMAT_PCM_32_BIT
- sampling_rates 44100|48000|88200|96000|176400|192000
- bit_width 16
- app_type 69936
- }
- direct_pcm_24 {
- flags AUDIO_OUTPUT_FLAG_DIRECT
- formats AUDIO_FORMAT_PCM_24_BIT_PACKED|AUDIO_FORMAT_PCM_8_24_BIT|AUDIO_FORMAT_PCM_32_BIT
- sampling_rates 44100|48000|88200|96000|176400|192000|352800|384000
- bit_width 24
- app_type 69940
- }
- direct_pcm_32 {
- flags AUDIO_OUTPUT_FLAG_DIRECT
- formats AUDIO_FORMAT_PCM_32_BIT
- sampling_rates 44100|48000|88200|96000|176400|192000|352800|384000
- bit_width 32
- app_type 69942
- }
- compress_passthrough {
- flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING|AUDIO_OUTPUT_FLAG_COMPRESS_PASSTHROUGH
- formats AUDIO_FORMAT_DTS|AUDIO_FORMAT_DTS_HD|AUDIO_FORMAT_DSD
- sampling_rates 32000|44100|48000|88200|96000|176400|192000|352800
- bit_width 16
- app_type 69941
- }
- compress_offload_16 {
- flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING
- formats AUDIO_FORMAT_MP3|AUDIO_FORMAT_PCM_16_BIT_OFFLOAD|AUDIO_FORMAT_PCM_24_BIT_OFFLOAD|AUDIO_FORMAT_FLAC|AUDIO_FORMAT_ALAC|AUDIO_FORMAT_APE|AUDIO_FORMAT_AAC_LC|AUDIO_FORMAT_AAC_HE_V1|AUDIO_FORMAT_AAC_HE_V2|AUDIO_FORMAT_WMA|AUDIO_FORMAT_WMA_PRO|AUDIO_FORMAT_VORBIS|AUDIO_FORMAT_AAC_ADTS_LC|AUDIO_FORMAT_AAC_ADTS_HE_V1|AUDIO_FORMAT_AAC_ADTS_HE_V2
- sampling_rates 44100|48000|88200|96000|176400|192000
- bit_width 16
- app_type 69936
- }
- compress_offload_24 {
- flags AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING
- formats AUDIO_FORMAT_PCM_24_BIT_OFFLOAD|AUDIO_FORMAT_FLAC|AUDIO_FORMAT_ALAC|AUDIO_FORMAT_APE|AUDIO_FORMAT_VORBIS|AUDIO_FORMAT_WMA|AUDIO_FORMAT_WMA_PRO
- sampling_rates 44100|48000|88200|96000|176400|192000
- bit_width 24
- app_type 69940
- }
-}
-
-inputs {
- record_16bit {
- formats AUDIO_FORMAT_PCM_16_BIT
- sampling_rates 8000|16000|32000|44100|48000|88200|96000|176400|192000
- bit_width 16
- app_type 69938
- }
- record_24bit {
- formats AUDIO_FORMAT_PCM_24_BIT_PACKED|AUDIO_FORMAT_PCM_24_BIT
- sampling_rates 44100|48000|88200|96000|176400|192000
- bit_width 24
- app_type 69948
- }
- record_32bit {
- formats AUDIO_FORMAT_PCM_32_BIT|AUDIO_FORMAT_PCM_FLOAT
- sampling_rates 44100|48000|88200|96000|176400|192000
- bit_width 32
- app_type 69949
- }
-}
diff --git a/audio/audio_platform_info.xml b/audio/audio_platform_info.xml
deleted file mode 100644
index fb9b846..0000000
--- a/audio/audio_platform_info.xml
+++ /dev/null
@@ -1,614 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!-- Copyright (c) 2014, 2016-2019, The Linux Foundation. All rights reserved. -->
-<!-- -->
-<!-- Redistribution and use in source and binary forms, with or without -->
-<!-- modification, are permitted provided that the following conditions are -->
-<!-- met: -->
-<!-- * Redistributions of source code must retain the above copyright -->
-<!-- notice, this list of conditions and the following disclaimer. -->
-<!-- * Redistributions in binary form must reproduce the above -->
-<!-- copyright notice, this list of conditions and the following -->
-<!-- disclaimer in the documentation and/or other materials provided -->
-<!-- with the distribution. -->
-<!-- * Neither the name of The Linux Foundation nor the names of its -->
-<!-- contributors may be used to endorse or promote products derived -->
-<!-- from this software without specific prior written permission. -->
-<!-- -->
-<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
-<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
-<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
-<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
-<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
-<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
-<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
-<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
-<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
-<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
-<audio_platform_info>
- <acdb_ids>
- <device name="SND_DEVICE_OUT_SPEAKER" acdb_id="15"/>
- <device name="SND_DEVICE_OUT_SPEAKER_REVERSE" acdb_id="15"/>
- <device name="SND_DEVICE_OUT_SPEAKER_PROTECTED" acdb_id="124"/>
- <device name="SND_DEVICE_IN_VOICE_REC_QMIC_FLUENCE" acdb_id="131"/>
- <device name="SND_DEVICE_IN_VOICE_REC_TMIC" acdb_id="131"/>
- <device name="SND_DEVICE_IN_VOICE_REC_DMIC_FLUENCE" acdb_id="132"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_2_PROTECTED" acdb_id="150"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_2_PROTECTED_VBAT" acdb_id="150"/>
- <device name="SND_DEVICE_IN_CAPTURE_VI_FEEDBACK_MONO_1" acdb_id="151"/>
- <device name="SND_DEVICE_IN_CAPTURE_VI_FEEDBACK_MONO_2" acdb_id="152"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_USB_HEADSET_MIC" acdb_id="133"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_MIC" acdb_id="143"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_STEREO_MIC" acdb_id="144"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_THREE_MIC" acdb_id="145"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_QUAD_MIC" acdb_id="146"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_HEADSET_MIC" acdb_id="147"/>
- <device name="SND_DEVICE_IN_USB_HEADSET_HEX_MIC" acdb_id="162"/>
- <device name="SND_DEVICE_IN_USB_HEADSET_HEX_MIC_AEC" acdb_id="162"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_USB_HEADSET_HEX_MIC" acdb_id="162"/>
- <device name="SND_DEVICE_IN_VOCE_RECOG_USB_HEADSET_HEX_MIC" acdb_id="162"/>
- </acdb_ids>
-
- <module_ids>
- <aec>
- <device name="SND_DEVICE_IN_SPEAKER_TMIC_AEC_NS" module_id="0x10F35" instance_id="0x0" param_id="0x10EAF" param_value="0x01"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_AEC_NS_BROADSIDE" module_id="0x10F34" instance_id="0x0" param_id="0x10EAF" param_value="0x01"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_AEC_NS" module_id="0x10F33" instance_id="0x0" param_id="0x10EAF" param_value="0x01"/>
- <device name="SND_DEVICE_IN_SPEAKER_MIC_AEC_NS" module_id="0x10F31" instance_id="0x0" param_id="0x10EAF" param_value="0x01"/>
- <device name="SND_DEVICE_IN_HANDSET_DMIC_AEC_NS" module_id="0x10F33" instance_id="0x0" param_id="0x10EAF" param_value="0x01"/>
- <device name="SND_DEVICE_IN_HANDSET_MIC_AEC_NS" module_id="0x10F31" instance_id="0x0" param_id="0x10EAF" param_value="0x01"/>
- </aec>
- <ns>
- <device name="SND_DEVICE_IN_SPEAKER_TMIC_AEC_NS" module_id="0x10F35" instance_id="0x0" param_id="0x10EAF" param_value="0x02"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_AEC_NS_BROADSIDE" module_id="0x10F34" instance_id="0x0" param_id="0x10EAF" param_value="0x02"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_AEC_NS" module_id="0x10F33" instance_id="0x0" param_id="0x10EAF" param_value="0x02"/>
- <device name="SND_DEVICE_IN_SPEAKER_MIC_AEC_NS" module_id="0x10F31" instance_id="0x0" param_id="0x10EAF" param_value="0x02"/>
- <device name="SND_DEVICE_IN_HANDSET_DMIC_AEC_NS" module_id="0x10F33" instance_id="0x0" param_id="0x10EAF" param_value="0x02"/>
- <device name="SND_DEVICE_IN_HANDSET_MIC_AEC_NS" module_id="0x10F31" instance_id="0x0" param_id="0x10EAF" param_value="0x02"/>
- </ns>
- </module_ids>
-
- <bit_width_configs>
- <device name="SND_DEVICE_OUT_SPEAKER" bit_width="24"/>
- </bit_width_configs>
- <pcm_ids>
- <usecase name="USECASE_AUDIO_PLAYBACK_LOW_LATENCY" type="out" id="9"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_OFFLOAD" type="out" id="7"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_OFFLOAD2" type="out" id="11"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_OFFLOAD3" type="out" id="12"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_OFFLOAD4" type="out" id="24"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_OFFLOAD5" type="out" id="25"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_OFFLOAD6" type="out" id="26"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_OFFLOAD7" type="out" id="27"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_OFFLOAD8" type="out" id="28"/>
- <usecase name="USECASE_VOICEMMODE1_CALL" type="in" id="2"/>
- <usecase name="USECASE_VOICEMMODE1_CALL" type="out" id="2"/>
- <usecase name="USECASE_VOICEMMODE2_CALL" type="in" id="15"/>
- <usecase name="USECASE_VOICEMMODE2_CALL" type="out" id="15"/>
- <usecase name="USECASE_VOWLAN_CALL" type="in" id="-1"/>
- <usecase name="USECASE_VOWLAN_CALL" type="out" id="-1"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_FM" type="out" id="30"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_FM" type="in" id="38"/>
- <usecase name="USECASE_AUDIO_SPKR_CALIB_RX" type="out" id="30"/>
- <usecase name="USECASE_AUDIO_SPKR_CALIB_TX" type="in" id="33"/>
- <usecase name="USECASE_AUDIO_PLAYBACK_AFE_PROXY" type="out" id="5"/>
- <usecase name="USECASE_AUDIO_RECORD_AFE_PROXY" type="in" id="6"/>
- <usecase name="USECASE_AUDIO_RECORD_LOW_LATENCY" type="in" id="13" />
- <usecase name="USECASE_AUDIO_PLAYBACK_ULL" type="out" id="13" />
- <usecase name="USECASE_AUDIO_PLAYBACK_SILENCE" type="out" id="23" />
- <usecase name="USECASE_AUDIO_PLAYBACK_VOIP" type="out" id="12" />
- <usecase name="USECASE_AUDIO_RECORD_VOIP" type="in" id="12" />
- <usecase name="USECASE_AUDIO_PLAYBACK_MMAP" type="out" id="29" />
- <usecase name="USECASE_AUDIO_RECORD_MMAP" type="in" id="29" />
- <usecase name="USECASE_AUDIO_A2DP_ABR_FEEDBACK" type="in" id="36" />
- <usecase name="USECASE_AUDIO_A2DP_ABR_FEEDBACK" type="out" id="36" />
- <usecase name="USECASE_INCALL_MUSIC_UPLINK" type="out" id="23" />
- </pcm_ids>
- <config_params>
- <param key="spkr_1_tz_name" value="wsatz.13"/>
- <param key="spkr_2_tz_name" value="wsatz.14"/>
- <!-- In the below value string, the value indicates default mono -->
- <!-- speaker. It can be set to either left or right -->
- <param key="mono_speaker" value="left"/>
- <!-- In the below value string, first parameter indicates size -->
- <!-- followed by perf lock options -->
- <param key="perf_lock_opts" value="4, 0x40400000, 0x1, 0x40C00000, 0x1"/>
- <param key="native_audio_mode" value="src"/>
- <param key="input_mic_max_count" value="3"/>
- <param key="true_32_bit" value="true"/>
- <!-- In the below value string, the value indicates sidetone gain in dB -->
- <param key="usb_sidetone_gain" value="35"/>
- </config_params>
- <gain_db_to_level_mapping>
- <gain_level_map db="-59" level="5"/>
- <gain_level_map db="-17.4" level="4"/>
- <gain_level_map db="-13.8" level="3"/>
- <gain_level_map db="-10.2" level="2"/>
- <gain_level_map db="0" level="1"/>
- </gain_db_to_level_mapping>
- <backend_names>
- <device name="SND_DEVICE_OUT_HEADPHONES" backend="headphones" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_HEADPHONES_44_1" backend="headphones-44.1" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_BT_SCO_WB" backend="bt-sco-wb" interface="SLIMBUS_7_RX"/>
- <device name="SND_DEVICE_OUT_BT_SCO" backend="bt-sco" interface="SLIMBUS_7_RX"/>
- <device name="SND_DEVICE_OUT_BT_A2DP" backend="bt-a2dp" interface="SLIMBUS_7_RX"/>
- <device name="SND_DEVICE_OUT_LINE" backend="headphones" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_ANC_HEADSET" backend="headphones" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_HEADPHONES" backend="speaker-and-headphones" interface="QUIN_TDM_RX_0-and-RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_LINE" backend="speaker-and-headphones" interface="QUIN_TDM_RX_0-and-RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_ANC_HEADSET" backend="speaker-and-headphones" interface="QUIN_TDM_RX_0-and-RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_HEADPHONES" backend="headphones" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_ANC_HEADSET" backend="headphones" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_LINE" backend="headphones" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_TTY_FULL_HEADPHONES" backend="headphones" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_TTY_VCO_HEADPHONES" backend="headphones" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_HANDSET" backend="handset" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_EXTERNAL_1" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_EXTERNAL_2" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_REVERSE" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_VBAT" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_HEADPHONES_EXTERNAL_1" interface="QUIN_TDM_RX_0-and-RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_HEADPHONES_EXTERNAL_2" interface="QUIN_TDM_RX_0-and-RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_HANDSET" backend="handset" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_IN_HANDSET_GENERIC_QMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_VBAT" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_2" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_2_VBAT" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_HDMI" interface="QUIN_TDM_RX_0-and-HDMI"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_DISPLAY_PORT" interface="QUIN_TDM_RX_0-and-DISPLAY_PORT"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_BT_A2DP" interface="QUIN_TDM_RX_0-and-SLIMBUS_7_RX"/>
- <device name="SND_DEVICE_OUT_VOICE_TTY_HCO_HANDSET" backend="handset" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_ANC_FB_HEADSET" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_ANC_FB_HEADSET" interface="RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_ANC_HANDSET" backend="handset" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_PROTECTED" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_PROTECTED" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_2_PROTECTED" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_PROTECTED_VBAT" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_PROTECTED_VBAT" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_2_PROTECTED_VBAT" backend="speaker" interface="QUIN_TDM_RX_0"/>
- <device name="SND_DEVICE_IN_HANDSET_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_MIC_EXTERNAL" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_MIC_AEC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_MIC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_MIC_AEC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_DMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_DMIC_AEC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_DMIC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_DMIC_AEC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_MIC_AEC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_MIC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_MIC_AEC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_AEC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_AEC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HEADSET_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HEADSET_MIC_FLUENCE" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_SPEAKER_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_HEADSET_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HDMI_MIC" interface="HDMI"/>
- <device name="SND_DEVICE_IN_BT_SCO_MIC" interface="SLIMBUS_7_TX"/>
- <device name="SND_DEVICE_IN_BT_SCO_MIC_NREC" interface="SLIMBUS_7_TX"/>
- <device name="SND_DEVICE_IN_BT_SCO_MIC_WB" interface="SLIMBUS_7_TX"/>
- <device name="SND_DEVICE_IN_BT_SCO_MIC_WB_NREC" interface="SLIMBUS_7_TX"/>
- <device name="SND_DEVICE_IN_CAMCORDER_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_DMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_SPEAKER_DMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_SPEAKER_QMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_TTY_FULL_HEADSET_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_TTY_VCO_HANDSET_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_TTY_HCO_HEADSET_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_REC_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_REC_MIC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_REC_DMIC_STEREO" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_REC_DMIC_FLUENCE" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_AANC_HANDSET_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_QUAD_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_STEREO_DMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_STEREO_DMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_CAPTURE_VI_FEEDBACK" interface="WSA_CDC_DMA_TX_0"/>
- <device name="SND_DEVICE_IN_CAPTURE_VI_FEEDBACK_MONO_1" interface="WSA_CDC_DMA_TX_0"/>
- <device name="SND_DEVICE_IN_CAPTURE_VI_FEEDBACK_MONO_2" interface="WSA_CDC_DMA_TX_0"/>
- <device name="SND_DEVICE_IN_VOICE_SPEAKER_DMIC_BROADSIDE" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_BROADSIDE" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_AEC_BROADSIDE" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_NS_BROADSIDE" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_DMIC_AEC_NS_BROADSIDE" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_FLUENCE_DMIC_AANC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_QMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_QMIC_AEC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_QMIC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_SPEAKER_QMIC_AEC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_THREE_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_TMIC_FLUENCE_PRO" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_TMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_TMIC_AEC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_TMIC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_HANDSET_TMIC_AEC_NS" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_VOICE_REC_TMIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_STEREO_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_THREE_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_QUAD_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_IN_UNPROCESSED_HEADSET_MIC" interface="TX_CDC_DMA_TX_3"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_AND_VOICE_HEADPHONES" backend="speaker-and-headphones" interface="QUIN_TDM_RX_0-and-RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_VOICE_SPEAKER_AND_VOICE_ANC_HEADSET" backend="speaker-and-headphones" interface="QUIN_TDM_RX_0-and-RX_CDC_DMA_RX_0"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_BT_SCO" backend="speaker-and-bt-sco" interface="QUIN_TDM_RX_0-and-SLIMBUS_7_RX"/>
- <device name="SND_DEVICE_OUT_SPEAKER_AND_BT_SCO_WB" backend="speaker-and-bt-sco-wb" interface="QUIN_TDM_RX_0-and-SLIMBUS_7_RX"/>
- </backend_names>
- <!-- below values are for ref purpose to OEM, doesn't contain actual hardware info on MTP -->
- <microphone_characteristics>
- <microphone valid_mask="31" device_id="builtin_mic_1" type="AUDIO_DEVICE_IN_BUILTIN_MIC" address="bottom" location="AUDIO_MICROPHONE_LOCATION_MAINBODY"
- group="0" index_in_the_group="0" directionality="AUDIO_MICROPHONE_DIRECTIONALITY_OMNI" num_frequency_responses="93"
- frequencies="100.00 106.00 112.00 118.00 125.00 132.00 140.00 150.00 160.00 170.00 180.00 190.00 200.00 212.00 224.00 236.00 250.00 265.00 280.00 300.00 315.00 335.00 355.00 375.00 400.00 425.00 450.00 475.00 500.00 530.00 560.00 600.00 630.00 670.00 710.00 750.00 800.00 850.00 900.00 950.00 1000.00 1060.00 1120.00 1180.00 1250.00 1320.00 1400.00 1500.00 1600.00 1700.00 1800.00 1900.00 2000.00 2120.00 2240.00 2360.00 2500.00 2650.00 2800.00 3000.00 3150.00 3350.00 3550.00 3750.00 4000.00 4250.00 4500.00 4750.00 5000.00 5300.00 5600.00 6000.00 6300.00 6700.00 7100.00 7500.00 8000.00 8500.00 9000.00 9500.00 10000.00 10600.00 11200.00 11800.00 12500.00 13200.00 14000.00 15000.00 16000.00 17000.00 18000.00 19000.00 20000.00"
- responses="-0.78 -0.71 -0.64 -0.60 -0.55 -0.50 -0.47 -0.42 -0.39 -0.36 -0.34 -0.33 -0.32 -0.29 -0.28 -0.28 -0.27 -0.25 -0.25 -0.24 -0.23 -0.23 -0.22 -0.22 -0.19 -0.17 -0.15 -0.15 -0.14 -0.14 -0.12 -0.11 -0.10 -0.10 -0.08 -0.07 -0.07 -0.04 -0.03 -0.01 0.00 0.04 0.06 0.07 0.08 0.13 0.09 0.14 0.19 0.23 0.28 0.29 0.31 0.37 0.88 0.86 0.77 0.78 0.84 0.86 1.05 1.12 1.18 1.25 1.43 1.66 1.83 2.02 2.23 2.59 2.84 3.35 4.01 6.82 6.62 6.42 7.30 8.23 7.54 12.68 13.76 18.69 19.68 20.90 23.70 25.10 21.65 16.18 18.84 25.44 23.48 23.22 24.89"
- sensitivity="-37.0" max_spl="132.5" min_spl="28.5" orientation="0.0 0.0 1.0" geometric_location="0.0269 0.0058 0.0079" />
- <microphone valid_mask="31" device_id="builtin_mic_2" type="AUDIO_DEVICE_IN_BACK_MIC" address="back" location="AUDIO_MICROPHONE_LOCATION_MAINBODY"
- group="0" index_in_the_group="1" directionality="AUDIO_MICROPHONE_DIRECTIONALITY_OMNI" num_frequency_responses="92"
- frequencies="106.00 112.00 118.00 125.00 132.00 140.00 150.00 160.00 170.00 180.00 190.00 200.00 212.00 224.00 236.00 250.00 265.00 280.00 300.00 315.00 335.00 355.00 375.00 400.00 425.00 450.00 475.00 500.00 530.00 560.00 600.00 630.00 670.00 710.00 750.00 800.00 850.00 900.00 950.00 1000.00 1060.00 1120.00 1180.00 1250.00 1320.00 1400.00 1500.00 1600.00 1700.00 1800.00 1900.00 2000.00 2120.00 2240.00 2360.00 2500.00 2650.00 2800.00 3000.00 3150.00 3350.00 3550.00 3750.00 4000.00 4250.00 4500.00 4750.00 5000.00 5300.00 5600.00 6000.00 6300.00 6700.00 7100.00 7500.00 8000.00 8500.00 9000.00 9500.00 10000.00 10600.00 11200.00 11800.00 12500.00 13200.00 14000.00 15000.00 16000.00 17000.00 18000.00 19000.00 20000.00"
- responses="-0.75 -0.74 -0.69 -0.65 -0.62 -0.61 -0.56 -0.53 -0.50 -0.47 -0.43 -0.40 -0.37 -0.36 -0.33 -0.30 -0.28 -0.25 -0.24 -0.24 -0.24 -0.25 -0.24 -0.12 -0.10 -0.08 -0.09 -0.07 -0.07 -0.06 -0.06 -0.06 -0.05 -0.04 -0.05 -0.04 -0.01 0.02 0.02 0.00 0.02 0.03 0.07 0.10 0.10 0.13 0.01 0.01 0.10 0.11 0.19 0.24 0.38 0.46 0.26 0.27 0.43 0.76 0.75 1.09 1.09 0.94 1.06 1.21 1.47 1.45 1.36 2.07 2.85 2.90 3.85 4.65 5.84 5.46 6.15 7.50 8.30 10.62 12.70 16.65 20.95 25.41 26.32 20.20 16.60 11.24 7.85 7.62 20.19 7.32 2.87 5.18"
- sensitivity="-37.0" max_spl="132.5" min_spl="28.5" orientation="0.0 1.0 0.0" geometric_location="0.0546 0.1456 0.00415" />
- <microphone valid_mask="31" device_id="builtin_mic_3" type="AUDIO_DEVICE_IN_BUILTIN_MIC" address="" location="AUDIO_MICROPHONE_LOCATION_MAINBODY"
- group="0" index_in_the_group="2" directionality="AUDIO_MICROPHONE_DIRECTIONALITY_OMNI" num_frequency_responses="92"
- frequencies="100.00 106.00 112.00 118.00 125.00 132.00 140.00 150.00 160.00 170.00 180.00 190.00 200.00 212.00 224.00 236.00 250.00 265.00 280.00 300.00 315.00 335.00 355.00 375.00 400.00 425.00 450.00 475.00 500.00 530.00 560.00 600.00 630.00 670.00 710.00 750.00 800.00 850.00 900.00 950.00 1000.00 1060.00 1120.00 1180.00 1250.00 1320.00 1400.00 1500.00 1600.00 1700.00 1800.00 1900.00 2000.00 2120.00 2240.00 2360.00 2500.00 2650.00 2800.00 3000.00 3150.00 3350.00 3550.00 3750.00 4000.00 4250.00 4500.00 4750.00 5000.00 5300.00 5600.00 6000.00 6300.00 6700.00 7100.00 7500.00 8000.00 8500.00 9000.00 9500.00 10000.00 10600.00 11200.00 11800.00 12500.00 13200.00 14000.00 15000.00 16000.00 17000.00 18000.00 19000.00"
- responses="-9.24 -9.31 -9.39 -9.45 -9.46 -9.47 -9.50 -9.52 -9.51 -9.52 -9.51 -9.50 -9.49 -9.47 -9.48 -9.49 -9.48 -9.50 -9.51 -9.53 -9.55 -9.59 -9.63 -9.67 -9.58 -9.57 -9.65 -9.68 -9.71 -9.75 -9.79 -9.84 -9.87 -9.87 -9.90 -9.90 -9.91 -9.97 -10.01 -10.05 -9.85 -9.93 -9.94 -9.98 -10.04 -10.12 -10.28 -10.25 -10.01 -9.86 -9.81 -9.82 -9.61 -9.46 -8.27 -8.42 -8.98 -8.99 -8.82 -9.21 -8.92 -8.97 -9.30 -9.44 -9.52 -9.28 -9.09 -8.81 -7.02 -5.72 -5.30 -7.26 -8.39 -12.28 -8.23 -6.99 -5.52 -4.87 -3.82 -6.09 0.00 -2.15 -0.26 1.48 5.22 10.92 6.41 9.55 12.96 3.35 22.00 19.75"
- sensitivity="-37.0" max_spl="132.5" min_spl="28.5" orientation="0.0 0.0 1.0" geometric_location="0.0274 0.14065 0.0079" />
- <microphone valid_mask="31" device_id="builtin_mic_4" type="AUDIO_DEVICE_IN_BACK_MIC" address="" location="AUDIO_MICROPHONE_LOCATION_MAINBODY"
- group="0" index_in_the_group="3" directionality="AUDIO_MICROPHONE_DIRECTIONALITY_OMNI" num_frequency_responses="92"
- frequencies="106.00 112.00 118.00 125.00 132.00 140.00 150.00 160.00 170.00 180.00 190.00 200.00 212.00 224.00 236.00 250.00 265.00 280.00 300.00 315.00 335.00 355.00 375.00 400.00 425.00 450.00 475.00 500.00 530.00 560.00 600.00 630.00 670.00 710.00 750.00 800.00 850.00 900.00 950.00 1000.00 1060.00 1120.00 1180.00 1250.00 1320.00 1400.00 1500.00 1600.00 1700.00 1800.00 1900.00 2000.00 2120.00 2240.00 2360.00 2500.00 2650.00 2800.00 3000.00 3150.00 3350.00 3550.00 3750.00 4000.00 4250.00 4500.00 4750.00 5000.00 5300.00 5600.00 6000.00 6300.00 6700.00 7100.00 7500.00 8000.00 8500.00 9000.00 9500.00 10000.00 10600.00 11200.00 11800.00 12500.00 13200.00 14000.00 15000.00 16000.00 17000.00 18000.00 19000.00 20000.00"
- responses="-0.75 -0.74 -0.69 -0.65 -0.62 -0.61 -0.56 -0.53 -0.50 -0.47 -0.43 -0.40 -0.37 -0.36 -0.33 -0.30 -0.28 -0.25 -0.24 -0.24 -0.24 -0.25 -0.24 -0.12 -0.10 -0.08 -0.09 -0.07 -0.07 -0.06 -0.06 -0.06 -0.05 -0.04 -0.05 -0.04 -0.01 0.02 0.02 0.00 0.02 0.03 0.07 0.10 0.10 0.13 0.01 0.01 0.10 0.11 0.19 0.24 0.38 0.46 0.26 0.27 0.43 0.76 0.75 1.09 1.09 0.94 1.06 1.21 1.47 1.45 1.36 2.07 2.85 2.90 3.85 4.65 5.84 5.46 6.15 7.50 8.30 10.62 12.70 16.65 20.95 25.41 26.32 20.20 16.60 11.24 7.85 7.62 20.19 7.32 2.87 5.18"
- sensitivity="-37.0" max_spl="132.5" min_spl="28.5" orientation="0.0 1.0 0.0" geometric_location="0.0546 0.1456 0.00415" />
- </microphone_characteristics>
- <snd_devices>
- <input_snd_device>
- <input_snd_device_mic_mapping>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_MIC_AEC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_MIC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_MIC_AEC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_DMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_DMIC_AEC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_DMIC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_DMIC_AEC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_MIC_AEC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_MIC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_MIC_AEC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_DMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_DMIC_AEC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_DMIC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_DMIC_AEC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_SPEAKER_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_CAMCORDER_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_DMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_SPEAKER_DMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_SPEAKER_TMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_SPEAKER_QMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_REC_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_REC_MIC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_REC_DMIC_STEREO">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_REC_DMIC_FLUENCE">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_AANC_HANDSET_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_QUAD_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_STEREO_DMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_STEREO_DMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_SPEAKER_DMIC_BROADSIDE">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_DMIC_BROADSIDE">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_DMIC_AEC_BROADSIDE">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_DMIC_NS_BROADSIDE">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_DMIC_AEC_NS_BROADSIDE">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_FLUENCE_DMIC_AANC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_QMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_QMIC_AEC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_QMIC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_QMIC_AEC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_THREE_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_TMIC_FLUENCE_PRO">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_TMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_TMIC_AEC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_TMIC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_SPEAKER_TMIC_AEC_NS">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_VOICE_REC_TMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_UNPROCESSED_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_UNPROCESSED_STEREO_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_UNPROCESSED_THREE_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_UNPROCESSED_QUAD_MIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_UNUSED AUDIO_MICROPHONE_CHANNEL_MAPPING_DIRECT"/>
- </snd_dev>
- <snd_dev in_snd_device="SND_DEVICE_IN_HANDSET_GENERIC_QMIC">
- <mic_info mic_device_id="builtin_mic_1"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_2"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_3"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- <mic_info mic_device_id="builtin_mic_4"
- channel_mapping="AUDIO_MICROPHONE_CHANNEL_MAPPING_PROCESSED"/>
- </snd_dev>
- </input_snd_device_mic_mapping>
- </input_snd_device>
- </snd_devices>
-</audio_platform_info>
-
diff --git a/audio/mixer_paths.xml b/audio/mixer_paths.xml
deleted file mode 100644
index b1fb85c..0000000
--- a/audio/mixer_paths.xml
+++ /dev/null
@@ -1,2909 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!-- Copyright (c) 2015-2019, The Linux Foundation. All rights reserved. -->
-<!-- -->
-<!-- Redistribution and use in source and binary forms, with or without -->
-<!-- modification, are permitted provided that the following conditions are -->
-<!-- met: -->
-<!-- * Redistributions of source code must retain the above copyright -->
-<!-- notice, this list of conditions and the following disclaimer. -->
-<!-- * Redistributions in binary form must reproduce the above -->
-<!-- copyright notice, this list of conditions and the following -->
-<!-- disclaimer in the documentation and/or other materials provided -->
-<!-- with the distribution. -->
-<!-- * Neither the name of The Linux Foundation nor the names of its -->
-<!-- contributors may be used to endorse or promote products derived -->
-<!-- from this software without specific prior written permission. -->
-<!-- -->
-<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
-<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
-<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
-<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
-<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
-<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
-<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
-<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
-<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
-<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
-<mixer>
- <!-- These are the initial mixer settings -->
- <ctl name="Voice Rx Device Mute" id="0" value="0" />
- <ctl name="Voice Rx Device Mute" id="1" value="-1" />
- <ctl name="Voice Rx Device Mute" id="2" value="20" />
- <ctl name="Voice Tx Mute" id="0" value="0" />
- <ctl name="Voice Tx Mute" id="1" value="-1" />
- <ctl name="Voice Tx Mute" id="2" value="500" />
- <ctl name="Voice Rx Gain" id="0" value="0" />
- <ctl name="Voice Rx Gain" id="1" value="-1" />
- <ctl name="Voice Rx Gain" id="2" value="20" />
- <ctl name="Voice Sidetone Enable" value="0" />
- <ctl name="Voip Tx Mute" id="0" value="0" />
- <ctl name="Voip Tx Mute" id="1" value="500" />
- <ctl name="Voip Rx Gain" id="0" value="0" />
- <ctl name="Voip Rx Gain" id="1" value="20" />
- <ctl name="Voip Mode Config" value="12" />
- <ctl name="Voip Rate Config" value="0" />
- <ctl name="Voip Evrc Min Max Rate Config" id="0" value="1" />
- <ctl name="Voip Evrc Min Max Rate Config" id="1" value="4" />
- <ctl name="Voip Dtx Mode" value="0" />
- <ctl name="TTY Mode" value="OFF" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia1" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia4" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia5" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia7" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia8" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia10" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia11" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia12" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia13" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia14" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia15" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia16" value="0" />
- <ctl name="MultiMedia5 Mixer AFE_PCM_TX" value="0" />
- <ctl name="MultiMedia5 Mixer TX_CDC_DMA_TX_3" value="0" />
- <ctl name="MultiMedia1 Mixer TX_CDC_DMA_TX_3" value="0" />
- <ctl name="MultiMedia1 Mixer SLIM_7_TX" value="0" />
- <ctl name="MultiMedia8 Mixer SLIM_7_TX" value="0" />
- <ctl name="MultiMedia10 Mixer TX_CDC_DMA_TX_3" value="0" />
- <ctl name="MultiMedia10 Mixer SLIM_7_TX" value="0" />
- <ctl name="MultiMedia10 Mixer AFE_PCM_TX" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia1" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia2" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia3" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia4" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia5" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia6" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia7" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia8" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia9" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia10" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia11" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia12" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia13" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia14" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia15" value="0" />
- <ctl name="DISPLAY_PORT Mixer MultiMedia16" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia1" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia2" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia3" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia4" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia5" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia7" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia8" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia10" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia11" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia12" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia13" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia14" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia15" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia16" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia1" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia2" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia3" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia4" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia5" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia7" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia8" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia10" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia11" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia12" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia13" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia14" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia15" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia16" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia1" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia2" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia3" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia4" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia5" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia7" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia8" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia10" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia11" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia12" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia13" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia14" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia15" value="0" />
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia16" value="0" />
- <ctl name="MultiMedia1 Mixer USB_AUDIO_TX" value="0" />
- <ctl name="MultiMedia2 Mixer USB_AUDIO_TX" value="0" />
- <ctl name="MultiMedia5 Mixer USB_AUDIO_TX" value="0" />
- <ctl name="MultiMedia8 Mixer USB_AUDIO_TX" value="0" />
- <ctl name="MultiMedia10 Mixer USB_AUDIO_TX" value="0" />
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="WSA_CDC_DMA_RX_0 Channels" value="One" />
- <ctl name="RX_CDC_DMA_RX_0 Channels" value="One" />
- <ctl name="VI_FEED_TX Channels" value="Two" />
- <ctl name="WSA_AIF_VI Mixer WSA_SPKR_VI_1" value="0" />
- <ctl name="WSA_AIF_VI Mixer WSA_SPKR_VI_2" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Format" value="UNPACKED" />
- <ctl name="WSA_CDC_DMA_TX_0 Format" value="UNPACKED" />
- <ctl name="RX_CDC_DMA_RX_0 Format" value="UNPACKED" />
- <ctl name="TX_CDC_DMA_TX_3 Format" value="UNPACKED" />
-
- <ctl name="MultiMedia1 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia2 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia3 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia4 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia5 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia6 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia8 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia9 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia10 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia16 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia17 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia18 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia19 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia28 Mixer PRI_TDM_TX_0" value="0" />
- <ctl name="MultiMedia29 Mixer PRI_TDM_TX_0" value="0" />
- <!-- HFP start -->
- <ctl name="HFP_SLIM7_UL_HL Switch" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Port Mixer SLIM_7_TX" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Port Mixer SLIM_7_TX" value="0" />
- <!-- HFP end -->
- <!-- echo reference -->
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="None" />
- <!-- usb headset -->
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia1" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia2" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia4" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia7" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia10" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia11" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia12" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia13" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia14" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia15" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia16" value="0" />
- <ctl name="MultiMedia1 Mixer AFE_PCM_TX" value="0" />
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia5" value="0" />
- <!-- usb headset end -->
- <!-- fm -->
- <ctl name="SLIMBUS_8 LOOPBACK Volume" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0 Port Mixer SLIM_8_TX" value="0" />
- <ctl name="WSA_CDC_DMA_RX_0_DL_HL Switch" value="0" />
- <ctl name="RX_CDC_DMA_RX_0 Port Mixer SLIM_8_TX" value="0" />
- <ctl name="RX_CDC_DMA_RX_0_DL_HL Switch" value="0" />
- <ctl name="MultiMedia1 Mixer SLIM_8_TX" value="0" />
- <ctl name="MultiMedia2 Mixer SLIM_8_TX" value="0" />
- <!-- fm end -->
-
- <!-- Multimode Voice1 -->
- <ctl name="WSA_CDC_DMA_RX_0_Voice Mixer VoiceMMode1" value="0" />
- <ctl name="RX_CDC_DMA_RX_0_Voice Mixer VoiceMMode1" value="0" />
- <ctl name="VoiceMMode1_Tx Mixer TX_CDC_DMA_TX_3_MMode1" value="0" />
- <!-- Multimode Voice1 BTSCO -->
- <ctl name="SLIM_7_RX_Voice Mixer VoiceMMode1" value="0" />
- <ctl name="VoiceMMode1_Tx Mixer SLIM_7_TX_MMode1" value="0" />
- <!-- Multimode Voice1 USB headset -->
- <ctl name="AFE_PCM_RX_Voice Mixer VoiceMMode1" value="0" />
- <ctl name="VoiceMMode1_Tx Mixer AFE_PCM_TX_MMode1" value="0" />
- <ctl name="USB_AUDIO_RX_Voice Mixer VoiceMMode1" value="0" />
- <ctl name="VoiceMMode1_Tx Mixer USB_AUDIO_TX_MMode1" value="0" />
- <!-- Multimode Voice1 Display-Port -->
- <ctl name="DISPLAY_PORT_RX_Voice Mixer VoiceMMode1" value="0" />
- <!-- Miltimode Voice1 end-->
-
- <!-- Multimode Voice2 -->
- <ctl name="WSA_CDC_DMA_RX_0_Voice Mixer VoiceMMode2" value="0" />
- <ctl name="RX_CDC_DMA_RX_0_Voice Mixer VoiceMMode2" value="0" />
- <ctl name="VoiceMMode1_Tx Mixer TX_CDC_DMA_TX_3_MMode2" value="0" />
- <!-- Multimode Voice2 BTSCO -->
- <ctl name="SLIM_7_RX_Voice Mixer VoiceMMode2" value="0" />
- <ctl name="VoiceMMode2_Tx Mixer SLIM_7_TX_MMode2" value="0" />
- <!-- Multimode Voice2 USB headset -->
- <ctl name="AFE_PCM_RX_Voice Mixer VoiceMMode2" value="0" />
- <ctl name="VoiceMMode2_Tx Mixer AFE_PCM_TX_MMode2" value="0" />
- <ctl name="USB_AUDIO_RX_Voice Mixer VoiceMMode2" value="0" />
- <ctl name="VoiceMMode2_Tx Mixer USB_AUDIO_TX_MMode2" value="0" />
- <!-- Multimode Voice2 Display-Port -->
- <ctl name="DISPLAY_PORT_RX_Voice Mixer VoiceMMode2" value="0" />
- <!-- Multimode Voice2 end-->
-
- <!-- Voice external ec. reference -->
- <ctl name="VOC_EXT_EC MUX" value="NONE" />
- <!-- Voice external ec. reference end -->
-
- <!-- RT Proxy Cal -->
- <ctl name="RT_PROXY_1_RX SetCalMode" value="CAL_MODE_NONE" />
- <ctl name="RT_PROXY_1_TX SetCalMode" value="CAL_MODE_NONE" />
- <!-- RT Proxy Cal end -->
-
- <!-- Incall Recording -->
- <ctl name="MultiMedia1 Mixer VOC_REC_UL" value="0" />
- <ctl name="MultiMedia1 Mixer VOC_REC_DL" value="0" />
- <ctl name="MultiMedia8 Mixer VOC_REC_UL" value="0" />
- <ctl name="MultiMedia8 Mixer VOC_REC_DL" value="0" />
- <!-- Incall Recording End -->
-
- <!-- Incall Music -->
- <ctl name="Incall_Music Audio Mixer MultiMedia2" value="0" />
- <ctl name="Incall_Music Audio Mixer MultiMedia9" value="0" />
- <!-- Incall Music End -->
-
- <!-- compress-voip-call start -->
- <ctl name="WSA_CDC_DMA_RX_0_Voice Mixer Voip" value="0" />
- <ctl name="RX_CDC_DMA_RX_0_Voice Mixer Voip" value="0" />
- <ctl name="Voip_Tx Mixer TX_CDC_DMA_TX_3_Voip" value="0" />
- <ctl name="SLIM_7_RX_Voice Mixer Voip" value="0" />
- <ctl name="Voip_Tx Mixer SLIM_7_TX_Voip" value="0" />
- <ctl name="AFE_PCM_RX_Voice Mixer Voip" value="0" />
- <ctl name="Voip_Tx Mixer AFE_PCM_TX_Voip" value="0" />
- <ctl name="USB_AUDIO_RX_Voice Mixer Voip" value="0" />
- <ctl name="Voip_Tx Mixer USB_AUDIO_TX_Voip" value="0" />
- <!-- compress-voip-call end-->
-
- <!-- Audio BTSCO -->
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia1" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia4" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia5" value="0" />
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia6" value="0" />
- <ctl name="MultiMedia1 Mixer SLIM_7_TX" value="0" />
- <!-- audio record compress-->
- <ctl name="MultiMedia8 Mixer TX_CDC_DMA_TX_3" value="0" />
- <ctl name="MultiMedia8 Mixer SLIM_7_TX" value="0" />
- <ctl name="MultiMedia8 Mixer AFE_PCM_TX" value="0" />
- <!-- audio record compress end-->
-
- <!-- split a2dp -->
- <ctl name="BT SampleRate" value="KHZ_8" />
- <ctl name="AFE Input Channels" value="Zero" />
- <ctl name="SLIM7_RX ADM Channels" value="Zero" />
- <!-- split a2dp end-->
-
- <!-- ADSP testfwk -->
- <ctl name="WSA_CDC_DMA_RX_0_DL_HL Switch" value="0" />
- <ctl name="RX_CDC_DMA_RX_0_DL_HL Switch" value="0" />
- <!-- ADSP testfwk end-->
-
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia3" value="0" />
-
- <!-- Codec controls -->
- <!-- WSA controls -->
- <ctl name="WSA RX0 MUX" value="ZERO" />
- <ctl name="WSA RX1 MUX" value="ZERO" />
- <ctl name="WSA_RX0 INP0" value="ZERO" />
- <ctl name="WSA_RX1 INP0" value="ZERO" />
- <ctl name="WSA_AIF_VI Mixer WSA_SPKR_VI_1" value="0" />
- <ctl name="WSA_AIF_VI Mixer WSA_SPKR_VI_2" value="0" />
- <ctl name="WSA_RX_0_VI_FB_LCH_MUX" value="ZERO" />
- <ctl name="WSA_RX_0_VI_FB_RCH_MUX" value="ZERO" />
- <ctl name="SpkrLeft COMP Switch" value="0" />
- <ctl name="SpkrRight COMP Switch" value="0" />
- <ctl name="SpkrLeft BOOST Switch" value="0" />
- <ctl name="SpkrRight BOOST Switch" value="0" />
- <ctl name="SpkrLeft VISENSE Switch" value="0" />
- <ctl name="SpkrRight VISENSE Switch" value="0" />
- <ctl name="SpkrLeft SWR DAC_Port Switch" value="0" />
- <ctl name="SpkrRight SWR DAC_Port Switch" value="0" />
-
- <!-- RX Controls -->
- <ctl name="RX_MACRO RX0 MUX" value="ZERO" />
- <ctl name="RX_MACRO RX1 MUX" value="ZERO" />
- <ctl name="RX_CDC_DMA_RX_0 Channels" value="One" />
- <ctl name="RX INT0_1 MIX1 INP0" value="ZERO" />
- <ctl name="RX INT0_1 MIX1 INP1" value="ZERO" />
- <ctl name="RX INT0_1 MIX1 INP2" value="ZERO" />
- <ctl name="RX INT1_1 MIX1 INP0" value="ZERO" />
- <ctl name="RX INT1_1 MIX1 INP1" value="ZERO" />
- <ctl name="RX INT1_1 MIX1 INP2" value="ZERO" />
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia1" value="0" />
- <ctl name="RX INT0 DEM MUX" value="NORMAL_DSM_OUT" />
- <ctl name="RX INT1 DEM MUX" value="NORMAL_DSM_OUT" />
- <ctl name="RX_COMP1 Switch" value="0" />
- <ctl name="RX_COMP2 Switch" value="0" />
- <ctl name="HPHL_COMP Switch" value="0" />
- <ctl name="HPHR_COMP Switch" value="0" />
- <ctl name="EAR_RDAC Switch" value="0" />
- <ctl name="HPHL_RDAC Switch" value="0" />
- <ctl name="HPHR_RDAC Switch" value="0" />
- <ctl name="AUX_RDAC Switch" value="0" />
- <ctl name="RDAC3_MUX" value="ZERO" />
- <ctl name="RX_EAR Mode" value="OFF" />
-
- <!-- TX Controls -->
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="MultiMedia1 Mixer TX_CDC_DMA_TX_3" value="0" />
- <ctl name="ADC2_MIXER Switch" value="0" />
- <ctl name="ADC2 MUX" value="ZERO" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="0" />
- <ctl name="TX_AIF1_CAP Mixer DEC1" value="0" />
- <ctl name="TX_AIF1_CAP Mixer DEC2" value="0" />
- <ctl name="TX_AIF1_CAP Mixer DEC3" value="0" />
- <ctl name="TX_AIF1_CAP Mixer DEC4" value="0" />
- <ctl name="TX_AIF1_CAP Mixer DEC5" value="0" />
- <ctl name="TX_AIF1_CAP Mixer DEC6" value="0" />
- <ctl name="TX_AIF1_CAP Mixer DEC7" value="0" />
- <ctl name="TX DEC0 MUX" value="MSM_DMIC" />
- <ctl name="TX DMIC MUX0" value="ZERO" />
- <ctl name="TX SMIC MUX0" value="ZERO" />
- <ctl name="TX DEC1 MUX" value="MSM_DMIC" />
- <ctl name="TX DMIC MUX1" value="ZERO" />
- <ctl name="TX SMIC MUX1" value="ZERO" />
- <ctl name="TX DEC2 MUX" value="MSM_DMIC" />
- <ctl name="TX DMIC MUX2" value="ZERO" />
- <ctl name="TX SMIC MUX2" value="ZERO" />
- <ctl name="TX DEC3 MUX" value="MSM_DMIC" />
- <ctl name="TX DMIC MUX3" value="ZERO" />
- <ctl name="TX SMIC MUX3" value="ZERO" />
- <ctl name="TX DEC4 MUX" value="MSM_DMIC" />
- <ctl name="TX DMIC MUX4" value="ZERO" />
- <ctl name="TX SMIC MUX4" value="ZERO" />
- <ctl name="TX DEC5 MUX" value="MSM_DMIC" />
- <ctl name="TX DMIC MUX5" value="ZERO" />
- <ctl name="TX SMIC MUX5" value="ZERO" />
- <ctl name="TX DEC6 MUX" value="MSM_DMIC" />
- <ctl name="TX DMIC MUX6" value="ZERO" />
- <ctl name="TX SMIC MUX6" value="ZERO" />
- <ctl name="TX DEC7 MUX" value="MSM_DMIC" />
- <ctl name="TX DMIC MUX7" value="ZERO" />
- <ctl name="TX SMIC MUX7" value="ZERO" />
-
- <!-- Volume controls -->
- <ctl name="WSA_RX0 Digital Volume" value="84" />
- <ctl name="WSA_RX1 Digital Volume" value="84" />
- <ctl name="RX_RX0 Digital Volume" value="84" />
- <ctl name="RX_RX1 Digital Volume" value="84" />
- <ctl name="RX_RX2 Digital Volume" value="84" />
- <ctl name="HPHL Volume" value="20" />
- <ctl name="HPHR Volume" value="20" />
- <ctl name="EAR SPKR PA Gain" value="G_DEFAULT" />
-
- <ctl name="TX_DEC0 Volume" value="102" />
- <ctl name="TX_DEC1 Volume" value="102" />
- <ctl name="TX_DEC2 Volume" value="102" />
- <ctl name="TX_DEC3 Volume" value="102" />
- <ctl name="TX_DEC4 Volume" value="84" />
- <ctl name="TX_DEC5 Volume" value="84" />
- <ctl name="TX_DEC6 Volume" value="84" />
- <ctl name="TX_DEC7 Volume" value="84" />
-
- <ctl name="ADC1 Volume" value="12" />
- <ctl name="ADC2 Volume" value="12" />
- <ctl name="ADC3 Volume" value="12" />
-
- <!-- Compander controls -->
- <ctl name="WSA_COMP1 Switch" value="0" />
- <ctl name="WSA_COMP2 Switch" value="0" />
- <ctl name="COMP7 Switch" value="0" />
- <ctl name="COMP8 Switch" value="0" />
-
- <!-- Headphone class-H mode -->
- <ctl name="RX_HPH_PWR_MODE" value="ULP" />
- <ctl name="RX HPH Mode" value="CLS_H_ULP" />
-
- <!-- IIR/voice anc -->
- <ctl name="IIR0 Band1" id ="0" value="268435456" />
- <ctl name="IIR0 Band1" id ="1" value="0" />
- <ctl name="IIR0 Band1" id ="2" value="0" />
- <ctl name="IIR0 Band1" id ="3" value="0" />
- <ctl name="IIR0 Band1" id ="4" value="0" />
- <ctl name="IIR0 Band2" id ="0" value="268435456" />
- <ctl name="IIR0 Band2" id ="1" value="0" />
- <ctl name="IIR0 Band2" id ="2" value="0" />
- <ctl name="IIR0 Band2" id ="3" value="0" />
- <ctl name="IIR0 Band2" id ="4" value="0" />
- <ctl name="IIR0 Band3" id ="0" value="268435456" />
- <ctl name="IIR0 Band3" id ="1" value="0" />
- <ctl name="IIR0 Band3" id ="2" value="0" />
- <ctl name="IIR0 Band3" id ="3" value="0" />
- <ctl name="IIR0 Band3" id ="4" value="0" />
- <ctl name="IIR0 Band4" id ="0" value="268435456" />
- <ctl name="IIR0 Band4" id ="1" value="0" />
- <ctl name="IIR0 Band4" id ="2" value="0" />
- <ctl name="IIR0 Band4" id ="3" value="0" />
- <ctl name="IIR0 Band4" id ="4" value="0" />
- <ctl name="IIR0 Band5" id ="0" value="268435456" />
- <ctl name="IIR0 Band5" id ="1" value="0" />
- <ctl name="IIR0 Band5" id ="2" value="0" />
- <ctl name="IIR0 Band5" id ="3" value="0" />
- <ctl name="IIR0 Band5" id ="4" value="0" />
- <ctl name="IIR0 Enable Band1" value="0" />
- <ctl name="IIR0 Enable Band2" value="0" />
- <ctl name="IIR0 Enable Band3" value="0" />
- <ctl name="IIR0 Enable Band4" value="0" />
- <ctl name="IIR0 Enable Band5" value="0" />
- <ctl name="IIR0 INP0 Volume" value="54" />
- <ctl name="IIR0 INP0 MUX" value="ZERO" />
- <ctl name="IIR0 INP1 MUX" value="ZERO" />
- <ctl name="IIR0 INP2 MUX" value="ZERO" />
- <ctl name="IIR0 INP3 MUX" value="ZERO" />
-
- <!-- vbat related data -->
- <ctl name="GSM mode Enable" value="OFF" />
- <ctl name="WSA_Softclip0 Enable" value="0" />
- <ctl name="WSA_Softclip1 Enable" value="0" />
- <ctl name="WSA_RX INT0 VBAT WSA RX0 VBAT Enable" value="0" />
- <ctl name="WSA_RX INT1 VBAT WSA RX1 VBAT Enable" value="0" />
-
- <!-- Codec controls end -->
-
- <!-- defaults for mmap record -->
- <ctl name="MultiMedia16 Mixer TX_CDC_DMA_TX_3" value="0" />
- <ctl name="MultiMedia16 Mixer SLIM_7_TX" value="0" />
- <ctl name="MultiMedia16 Mixer SLIM_8_TX" value="0" />
- <ctl name="MultiMedia16 Mixer USB_AUDIO_TX" value="0" />
-
- <!-- ALC5513 config -->
- <ctl name="Sto1 ADC MIXL DMIC Switch" value="0" />
- <ctl name="Sto1 ADC MIXR DMIC Switch" value="0" />
- <ctl name="Sto2 ADC MIXL DMIC Switch" value="0" />
- <ctl name="Sto2 ADC MIXR DMIC Switch" value="0" />
- <ctl name="Stereo1 DMIC Mux" value="DMIC1" />
- <ctl name="Stereo2 DMIC Mux" value="DMIC2" />
- <ctl name="ADC1 Capture Volume" value="23"/>
- <ctl name="ADC2 Capture Volume" value="23"/>
- <ctl name="PRI_TDM_TX_0 Channels" value="Four"/>
- <ctl name="PRI_TDM_TX_0 Format" value="S16_LE" />
- <ctl name="PRI TDM TX Channel Offset" id="0" value="0" />
- <ctl name="PRI TDM TX Channel Offset" id="1" value="8" />
- <ctl name="PRI TDM TX Channel Offset" id="2" value="12" />
- <!-- ALC5513 config end-->
-
- <!-- CS35L41 config -->
- <ctl name="QUIN_TDM_RX_0 Channels" value="Four" />
- <ctl name="QUIN_TDM_TX_0 Channels" value="Four" />
- <ctl name="QUIN_TDM_RX_0 Format" value="S32_LE" />
- <ctl name="AMP PCM Gain" value="17" />
- <ctl name="R AMP PCM Gain" value="17" />
- <ctl name="DRE DRE Switch" value="1" />
- <ctl name="R DRE DRE Switch" value="1" />
- <ctl name="VBSTMON Output Switch" value="1" />
- <ctl name="R VBSTMON Output Switch" value="1" />
- <ctl name="PCM Source" value="DSP" />
- <ctl name="R PCM Source" value="DSP" />
- <ctl name="DSP Booted" value="0" />
- <ctl name="R DSP Booted" value="0" />
- <ctl name="DSP1 Firmware" value="Protection" />
- <ctl name="R DSP1 Firmware" value="Protection" />
- <ctl name="DSP1 Preload Switch" value="1" />
- <ctl name="R DSP1 Preload Switch" value="1" />
- <ctl name="Main AMP Enable Switch" value="1" />
- <ctl name="R Main AMP Enable Switch" value="1" />
- <!-- CS35L41 config end-->
-
- <!-- These are audio route (FE to BE) specific mixer settings -->
- <path name="gsm-mode">
- <ctl name="GSM mode Enable" value="ON" />
- </path>
-
- <path name="echo-reference">
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="WSA_CDC_DMA_RX_0" />
- </path>
-
- <path name="echo-reference headphones">
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="RX_CDC_DMA_RX_0" />
- </path>
-
- <path name="echo-reference display-port">
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="DISPLAY_PORT" />
- </path>
-
- <path name="echo-reference headphones-44.1">
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="RX_CDC_DMA_RX_0" />
- </path>
-
- <path name="echo-reference-voip">
- <ctl name="AUDIO_REF_EC_UL10 MUX" value="WSA_CDC_DMA_RX_0" />
- </path>
-
- <path name="echo-reference-voip headphones">
- <ctl name="AUDIO_REF_EC_UL10 MUX" value="RX_CDC_DMA_RX_0" />
- </path>
-
- <path name="deep-buffer-playback">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="deep-buffer-playback handset">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="deep-buffer-playback speaker">
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="deep-buffer-playback speaker-safe">
- <path name="deep-buffer-playback "/>
- </path>
-
- <path name="deep-buffer-playback speaker-protected">
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="deep-buffer-playback display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="deep-buffer-playback speaker-and-display-port">
- <path name="deep-buffer-playback display-port" />
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="deep-buffer-playback bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="deep-buffer-playback bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="deep-buffer-playback bt-sco" />
- </path>
-
- <path name="deep-buffer-playback bt-sco-swb">
- <path name="deep-buffer-playback bt-sco" />
- </path>
-
- <path name="deep-buffer-playback afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="deep-buffer-playback usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="deep-buffer-playback usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="deep-buffer-playback speaker-and-usb-headphones">
- <path name="deep-buffer-playback usb-headphones" />
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="deep-buffer-playback headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="deep-buffer-playback speaker-and-headphones">
- <path name="deep-buffer-playback headphones" />
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="deep-buffer-playback speaker-and-bt-sco">
- <path name="deep-buffer-playback bt-sco" />
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="deep-buffer-playback speaker-and-bt-sco-wb">
- <path name="deep-buffer-playback bt-sco-wb" />
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="deep-buffer-playback speaker-and-bt-sco-swb">
- <path name="deep-buffer-playback bt-sco-swb" />
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="low-latency-playback">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="low-latency-playback handset">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="low-latency-playback speaker">
- <path name="low-latency-playback" />
- </path>
-
- <path name="low-latency-playback speaker-safe">
- <path name="low-latency-playback" />
- </path>
-
- <path name="low-latency-playback speaker-protected">
- <path name="low-latency-playback" />
- </path>
-
- <path name="low-latency-playback display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="low-latency-playback bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="low-latency-playback bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="low-latency-playback bt-sco" />
- </path>
-
- <path name="low-latency-playback bt-sco-swb">
- <path name="low-latency-playback bt-sco" />
- </path>
-
- <path name="low-latency-playback speaker-and-display-port">
- <path name="low-latency-playback display-port" />
- <path name="low-latency-playback" />
- </path>
-
- <path name="low-latency-playback afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="low-latency-playback usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="low-latency-playback usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="low-latency-playback speaker-and-usb-headphones">
- <path name="low-latency-playback usb-headphones" />
- <path name="low-latency-playback" />
- </path>
-
- <path name="low-latency-playback headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="low-latency-playback speaker-and-headphones">
- <path name="low-latency-playback headphones" />
- <path name="low-latency-playback" />
- </path>
- <path name="low-latency-playback resume">
- <ctl name="MultiMedia5_RX QOS Vote" value="Enable" />
- </path>
-
- <path name="low-latency-playback speaker-and-bt-sco">
- <path name="low-latency-playback bt-sco" />
- <path name="low-latency-playback" />
- </path>
-
- <path name="low-latency-playback speaker-and-bt-sco-wb">
- <path name="low-latency-playback bt-sco-wb" />
- <path name="low-latency-playback" />
- </path>
-
- <path name="low-latency-playback speaker-and-bt-sco-swb">
- <path name="low-latency-playback bt-sco-swb" />
- <path name="low-latency-playback" />
- </path>
-
- <path name="audio-ull-playback">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="audio-ull-playback handset">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="audio-ull-playback speaker">
- <path name="audio-ull-playback" />
- </path>
-
- <path name="audio-ull-playback speaker-safe">
- <path name="audio-ull-playback" />
- </path>
-
- <path name="audio-ull-playback speaker-protected">
- <path name="audio-ull-playback" />
- </path>
-
- <path name="audio-ull-playback headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="audio-ull-playback speaker-and-headphones">
- <path name="audio-ull-playback" />
- <path name="audio-ull-playback headphones" />
- </path>
-
- <path name="audio-ull-playback display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="audio-ull-playback bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="audio-ull-playback bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="audio-ull-playback bt-sco" />
- </path>
-
- <path name="audio-ull-playback bt-sco-swb">
- <path name="audio-ull-playback bt-sco" />
- </path>
-
- <path name="audio-ull-playback speaker-and-display-port">
- <path name="audio-ull-playback display-port" />
- <path name="audio-ull-playback" />
- </path>
-
- <path name="audio-ull-playback afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="audio-ull-playback usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="audio-ull-playback usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="audio-ull-playback speaker-and-bt-sco">
- <path name="audio-ull-playback bt-sco" />
- <path name="audio-ull-playback" />
- </path>
-
- <path name="audio-ull-playback speaker-and-bt-sco-wb">
- <path name="audio-ull-playback bt-sco-wb" />
- <path name="audio-ull-playback" />
- </path>
-
- <path name="audio-ull-playback speaker-and-bt-sco-swb">
- <path name="audio-ull-playback bt-sco-swb" />
- <path name="audio-ull-playback" />
- </path>
-
- <path name="multi-channel-playback display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia2" value="1" />
- </path>
-
- <path name="multi-channel-playback afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia2" value="1" />
- </path>
-
- <path name="compress-offload-playback">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback handset">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback speaker">
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback speaker-safe">
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback speaker-protected">
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="silence-playback display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia9" value="1" />
- </path>
-
- <path name="compress-offload-playback bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback bt-sco" />
- </path>
-
- <path name="compress-offload-playback bt-sco-swb">
- <path name="compress-offload-playback bt-sco" />
- </path>
-
- <path name="compress-offload-playback speaker-and-display-port">
- <path name="compress-offload-playback display-port" />
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback speaker-and-usb-headphones">
- <path name="compress-offload-playback usb-headphones" />
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback speaker-and-headphones">
- <path name="compress-offload-playback headphones" />
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback speaker-and-bt-sco">
- <path name="compress-offload-playback bt-sco" />
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback speaker-and-bt-sco-wb">
- <path name="compress-offload-playback bt-sco-wb" />
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback speaker-and-bt-sco-swb">
- <path name="compress-offload-playback bt-sco-swb" />
- <path name="compress-offload-playback" />
- </path>
-
- <path name="compress-offload-playback2">
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback2 display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback2 bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback2 bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback2 bt-sco" />
- </path>
-
- <path name="compress-offload-playback2 bt-sco-swb">
- <path name="compress-offload-playback2 bt-sco" />
- </path>
-
- <path name="compress-offload-playback2 speaker-and-display-port">
- <path name="compress-offload-playback2 display-port" />
- <path name="compress-offload-playback2" />
- </path>
-
- <path name="compress-offload-playback2 afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback2 usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback2 usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback2 speaker-and-usb-headphones">
- <path name="compress-offload-playback2 usb-headphones" />
- <path name="compress-offload-playback2" />
- </path>
-
- <path name="compress-offload-playback2 headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback2 headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia7" value="1" />
-
- </path>
-
- <path name="compress-offload-playback2 headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback2 speaker-and-headphones">
- <path name="compress-offload-playback2 headphones" />
- <path name="compress-offload-playback2" />
- </path>
-
- <path name="compress-offload-playback2 speaker-and-bt-sco">
- <path name="compress-offload-playback2 bt-sco" />
- <path name="compress-offload-playback2" />
- </path>
-
- <path name="compress-offload-playback2 speaker-and-bt-sco-wb">
- <path name="compress-offload-playback2 bt-sco-wb" />
- <path name="compress-offload-playback2" />
- </path>
-
- <path name="compress-offload-playback2 speaker-and-bt-sco-swb">
- <path name="compress-offload-playback2 bt-sco-swb" />
- <path name="compress-offload-playback2" />
- </path>
-
- <path name="compress-offload-playback3">
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback3 bt-sco" />
- </path>
-
- <path name="compress-offload-playback3 bt-sco-swb">
- <path name="compress-offload-playback3 bt-sco" />
- </path>
-
- <path name="compress-offload-playback3 speaker-and-display-port">
- <path name="compress-offload-playback3 display-port" />
- <path name="compress-offload-playback3" />
- </path>
-
- <path name="compress-offload-playback3 afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 speaker-and-usb-headphones">
- <path name="compress-offload-playback3 usb-headphones" />
- <path name="compress-offload-playback3" />
- </path>
-
- <path name="compress-offload-playback3 headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback3 speaker-and-headphones">
- <path name="compress-offload-playback3 headphones" />
- <path name="compress-offload-playback3" />
- </path>
-
- <path name="compress-offload-playback3 speaker-and-bt-sco">
- <path name="compress-offload-playback3 bt-sco" />
- <path name="compress-offload-playback3" />
- </path>
-
- <path name="compress-offload-playback3 speaker-and-bt-sco-wb">
- <path name="compress-offload-playback3 bt-sco-wb" />
- <path name="compress-offload-playback3" />
- </path>
-
- <path name="compress-offload-playback3 speaker-and-bt-sco-swb">
- <path name="compress-offload-playback3 bt-sco-swb" />
- <path name="compress-offload-playback3" />
- </path>
-
- <path name="compress-offload-playback4">
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback4 bt-sco" />
- </path>
-
- <path name="compress-offload-playback4 bt-sco-swb">
- <path name="compress-offload-playback4 bt-sco" />
- </path>
-
- <path name="compress-offload-playback4 speaker-and-display-port">
- <path name="compress-offload-playback4 display-port" />
- <path name="compress-offload-playback4" />
- </path>
-
-
- <path name="compress-offload-playback4 afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 speaker-and-usb-headphones">
- <path name="compress-offload-playback4 usb-headphones" />
- <path name="compress-offload-playback4" />
- </path>
-
- <path name="compress-offload-playback4 headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback4 speaker-and-headphones">
- <path name="compress-offload-playback4 headphones" />
- <path name="compress-offload-playback4" />
- </path>
-
- <path name="compress-offload-playback4 speaker-and-bt-sco">
- <path name="compress-offload-playback4 bt-sco" />
- <path name="compress-offload-playback4" />
- </path>
-
- <path name="compress-offload-playback4 speaker-and-bt-sco-wb">
- <path name="compress-offload-playback4 bt-sco-wb" />
- <path name="compress-offload-playback4" />
- </path>
-
- <path name="compress-offload-playback4 speaker-and-bt-sco-swb">
- <path name="compress-offload-playback4 bt-sco-swb" />
- <path name="compress-offload-playback4" />
- </path>
-
- <path name="compress-offload-playback5">
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback5 bt-sco" />
- </path>
-
- <path name="compress-offload-playback5 bt-sco-swb">
- <path name="compress-offload-playback5 bt-sco" />
- </path>
-
- <path name="compress-offload-playback5 speaker-and-display-port">
- <path name="compress-offload-playback5 display-port" />
- <path name="compress-offload-playback5" />
- </path>
-
- <path name="compress-offload-playback5 afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 speaker-and-usb-headphones">
- <path name="compress-offload-playback5 usb-headphones" />
- <path name="compress-offload-playback5" />
- </path>
-
- <path name="compress-offload-playback5 headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback5 speaker-and-headphones">
- <path name="compress-offload-playback5 headphones" />
- <path name="compress-offload-playback5" />
- </path>
-
- <path name="compress-offload-playback5 speaker-and-bt-sco">
- <path name="compress-offload-playback5 bt-sco" />
- <path name="compress-offload-playback5" />
- </path>
-
- <path name="compress-offload-playback5 speaker-and-bt-sco-wb">
- <path name="compress-offload-playback5 bt-sco-wb" />
- <path name="compress-offload-playback5" />
- </path>
-
- <path name="compress-offload-playback5 speaker-and-bt-sco-swb">
- <path name="compress-offload-playback5 bt-sco-swb" />
- <path name="compress-offload-playback5" />
- </path>
-
- <path name="compress-offload-playback6">
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback6 bt-sco" />
- </path>
-
- <path name="compress-offload-playback6 bt-sco-swb">
- <path name="compress-offload-playback6 bt-sco" />
- </path>
-
- <path name="compress-offload-playback6 speaker-and-display-port">
- <path name="compress-offload-playback6 display-port" />
- <path name="compress-offload-playback6" />
- </path>
-
- <path name="compress-offload-playback6 afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 speaker-and-usb-headphones">
- <path name="compress-offload-playback6 usb-headphones" />
- <path name="compress-offload-playback6" />
- </path>
-
- <path name="compress-offload-playback6 headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback6 speaker-and-headphones">
- <path name="compress-offload-playback6 headphones" />
- <path name="compress-offload-playback6" />
- </path>
-
- <path name="compress-offload-playback6 speaker-and-bt-sco">
- <path name="compress-offload-playback6 bt-sco" />
- <path name="compress-offload-playback6" />
- </path>
-
- <path name="compress-offload-playback6 speaker-and-bt-sco-wb">
- <path name="compress-offload-playback6 bt-sco-wb" />
- <path name="compress-offload-playback6" />
- </path>
-
- <path name="compress-offload-playback6 speaker-and-bt-sco-swb">
- <path name="compress-offload-playback6 bt-sco-swb" />
- <path name="compress-offload-playback6" />
- </path>
-
- <path name="compress-offload-playback7">
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback7 bt-sco" />
- </path>
-
- <path name="compress-offload-playback7 bt-sco-swb">
- <path name="compress-offload-playback7 bt-sco" />
- </path>
-
- <path name="compress-offload-playback7 speaker-and-display-port">
- <path name="compress-offload-playback7 display-port" />
- <path name="compress-offload-playback7" />
- </path>
-
- <path name="compress-offload-playback7 afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 speaker-and-usb-headphones">
- <path name="compress-offload-playback7 usb-headphones" />
- <path name="compress-offload-playback7" />
- </path>
-
- <path name="compress-offload-playback7 headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback7 speaker-and-headphones">
- <path name="compress-offload-playback7 headphones" />
- <path name="compress-offload-playback7" />
- </path>
-
- <path name="compress-offload-playback7 speaker-and-bt-sco">
- <path name="compress-offload-playback7 bt-sco" />
- <path name="compress-offload-playback7" />
- </path>
-
- <path name="compress-offload-playback7 speaker-and-bt-sco-wb">
- <path name="compress-offload-playback7 bt-sco-wb" />
- <path name="compress-offload-playback7" />
- </path>
-
- <path name="compress-offload-playback7 speaker-and-bt-sco-swb">
- <path name="compress-offload-playback7 bt-sco-swb" />
- <path name="compress-offload-playback7" />
- </path>
-
- <path name="compress-offload-playback8">
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback8 bt-sco" />
- </path>
-
- <path name="compress-offload-playback8 bt-sco-swb">
- <path name="compress-offload-playback8 bt-sco" />
- </path>
-
- <path name="compress-offload-playback8 speaker-and-display-port">
- <path name="compress-offload-playback8 display-port" />
- <path name="compress-offload-playback8" />
- </path>
-
- <path name="compress-offload-playback8 afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 speaker-and-usb-headphones">
- <path name="compress-offload-playback8 usb-headphones" />
- <path name="compress-offload-playback8" />
- </path>
-
- <path name="compress-offload-playback8 headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback8 speaker-and-headphones">
- <path name="compress-offload-playback8 headphones" />
- <path name="compress-offload-playback8" />
- </path>
-
- <path name="compress-offload-playback8 speaker-and-bt-sco">
- <path name="compress-offload-playback8 bt-sco" />
- <path name="compress-offload-playback8" />
- </path>
-
- <path name="compress-offload-playback8 speaker-and-bt-sco-wb">
- <path name="compress-offload-playback8 bt-sco-wb" />
- <path name="compress-offload-playback8" />
- </path>
-
- <path name="compress-offload-playback8 speaker-and-bt-sco-swb">
- <path name="compress-offload-playback8 bt-sco-swb" />
- <path name="compress-offload-playback8" />
- </path>
-
- <path name="compress-offload-playback9">
- <ctl name="WSA_CDC_DMA_RX_0 Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-offload-playback9 bt-sco" />
- </path>
-
- <path name="compress-offload-playback9 bt-sco-swb">
- <path name="compress-offload-playback9 bt-sco" />
- </path>
-
- <path name="compress-offload-playback9 speaker-and-display-port">
- <path name="compress-offload-playback9 display-port" />
- <path name="compress-offload-playback9" />
- </path>
-
- <path name="compress-offload-playback9 afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 speaker-and-usb-headphones">
- <path name="compress-offload-playback9 usb-headphones" />
- <path name="compress-offload-playback9" />
- </path>
-
- <path name="compress-offload-playback9 headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 headphones-44.1">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 headphones-dsd">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="compress-offload-playback9 speaker-and-headphones">
- <path name="compress-offload-playback9 headphones" />
- <path name="compress-offload-playback9" />
- </path>
-
- <path name="compress-offload-playback9 speaker-and-bt-sco">
- <path name="compress-offload-playback9 bt-sco" />
- <path name="compress-offload-playback9" />
- </path>
-
- <path name="compress-offload-playback9 speaker-and-bt-sco-wb">
- <path name="compress-offload-playback9 bt-sco-wb" />
- <path name="compress-offload-playback9" />
- </path>
-
- <path name="compress-offload-playback9 speaker-and-bt-sco-swb">
- <path name="compress-offload-playback9 bt-sco-swb" />
- <path name="compress-offload-playback9" />
- </path>
-
- <path name="audio-record">
- <ctl name="MultiMedia1 Mixer PRI_TDM_TX_0" value="1" />
- </path>
-
- <path name="audio-record usb-headset-mic">
- <ctl name="MultiMedia1 Mixer USB_AUDIO_TX" value="1" />
- </path>
-
- <path name="audio-record bt-sco">
- <ctl name="MultiMedia1 Mixer SLIM_7_TX" value="1" />
- </path>
-
- <path name="audio-record bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="audio-record bt-sco" />
- </path>
-
- <path name="audio-record bt-sco-swb">
- <path name="audio-record bt-sco" />
- </path>
-
- <path name="audio-record capture-fm">
- <ctl name="MultiMedia1 Mixer SLIM_8_TX" value="1" />
- </path>
-
- <path name="audio-record-compress">
- <ctl name="MultiMedia8 Mixer TX_CDC_DMA_TX_3" value="1" />
- </path>
-
- <path name="audio-record-compress bt-sco">
- <ctl name="MultiMedia8 Mixer SLIM_7_TX" value="1" />
- </path>
-
- <path name="audio-record-compress bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="audio-record-compress bt-sco" />
- </path>
-
- <path name="audio-record-compress bt-sco-swb">
- <path name="audio-record-compress bt-sco" />
- </path>
-
- <path name="audio-record-compress usb-headset-mic">
- <ctl name="MultiMedia8 Mixer USB_AUDIO_TX" value="1" />
- </path>
-
- <path name="low-latency-record">
- <ctl name="MultiMedia8 Mixer TX_CDC_DMA_TX_3" value="1" />
- </path>
-
- <path name="low-latency-record bt-sco">
- <ctl name="MultiMedia8 Mixer SLIM_7_TX" value="1" />
- </path>
-
- <path name="low-latency-record bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="low-latency-record bt-sco" />
- </path>
-
- <path name="low-latency-record bt-sco-swb">
- <path name="low-latency-record bt-sco" />
- </path>
-
- <path name="low-latency-record usb-headset-mic">
- <ctl name="MultiMedia8 Mixer USB_AUDIO_TX" value="1" />
- </path>
-
- <path name="low-latency-record capture-fm">
- <ctl name="MultiMedia8 Mixer SLIM_8_TX" value="1" />
- </path>
-
- <path name="fm-virtual-record capture-fm">
- <ctl name="MultiMedia2 Mixer SLIM_8_TX" value="1" />
- </path>
-
- <path name="play-fm">
- <ctl name="SLIMBUS_8 LOOPBACK Volume" value="1" />
- <ctl name="WSA_CDC_DMA_RX_0 Port Mixer SLIM_8_TX" value="1" />
- <ctl name="WSA_CDC_DMA_RX_0_DL_HL Switch" value="1" />
- </path>
-
- <path name="play-fm headphones">
- <ctl name="SLIMBUS_8 LOOPBACK Volume" value="1" />
- <ctl name="RX_CDC_DMA_RX_0 Port Mixer SLIM_8_TX" value="1" />
- <ctl name="RX_CDC_DMA_RX_0_DL_HL Switch" value="1" />
- </path>
-
- <path name="incall-rec-uplink">
- <ctl name="MultiMedia1 Mixer VOC_REC_UL" value="1" />
- </path>
-
- <path name="incall-rec-uplink bt-sco">
- <path name="incall-rec-uplink" />
- </path>
-
- <path name="incall-rec-uplink bt-sco-wb">
- <path name="incall-rec-uplink" />
- </path>
-
- <path name="incall-rec-uplink bt-sco-swb">
- <path name="incall-rec-uplink" />
- </path>
-
- <path name="incall-rec-uplink usb-headset-mic">
- <path name="incall-rec-uplink" />
- </path>
-
- <path name="incall-rec-uplink afe-proxy">
- <path name="incall-rec-uplink" />
- </path>
-
- <path name="incall-rec-uplink-compress">
- <ctl name="MultiMedia8 Mixer VOC_REC_UL" value="1" />
- </path>
-
- <path name="incall-rec-uplink-compress bt-sco">
- <path name="incall-rec-uplink-compress" />
- </path>
-
- <path name="incall-rec-uplink-compress bt-sco-wb">
- <path name="incall-rec-uplink-compress" />
- </path>
-
- <path name="incall-rec-uplink-compress bt-sco-swb">
- <path name="incall-rec-uplink-compress" />
- </path>
-
- <path name="incall-rec-uplink-compress usb-headset-mic">
- <path name="incall-rec-uplink-compress" />
- </path>
-
- <path name="incall-rec-uplink-compress afe-proxy">
- <path name="incall-rec-uplink-compress" />
- </path>
-
- <path name="incall-rec-downlink">
- <ctl name="MultiMedia1 Mixer VOC_REC_DL" value="1" />
- </path>
-
- <path name="incall-rec-downlink bt-sco">
- <path name="incall-rec-downlink" />
- </path>
-
- <path name="incall-rec-downlink bt-sco-wb">
- <path name="incall-rec-downlink" />
- </path>
-
- <path name="incall-rec-downlink bt-sco-swb">
- <path name="incall-rec-downlink" />
- </path>
-
- <path name="incall-rec-downlink usb-headset-mic">
- <path name="incall-rec-downlink" />
- </path>
-
- <path name="incall-rec-downlink afe-proxy">
- <path name="incall-rec-downlink" />
- </path>
-
- <path name="incall-rec-downlink-compress">
- <ctl name="MultiMedia8 Mixer VOC_REC_DL" value="1" />
- </path>
-
- <path name="incall-rec-downlink-compress bt-sco">
- <path name="incall-rec-downlink-compress" />
- </path>
-
- <path name="incall-rec-downlink-compress bt-sco-wb">
- <path name="incall-rec-downlink-compress" />
- </path>
-
- <path name="incall-rec-downlink-compress bt-sco-swb">
- <path name="incall-rec-downlink-compress" />
- </path>
-
- <path name="incall-rec-downlink-compress usb-headset-mic">
- <path name="incall-rec-downlink-compress" />
- </path>
-
- <path name="incall-rec-downlink-compress afe-proxy">
- <path name="incall-rec-downlink-compress" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink">
- <path name="incall-rec-uplink" />
- <path name="incall-rec-downlink" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink bt-sco">
- <path name="incall-rec-uplink-and-downlink" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink bt-sco-wb">
- <path name="incall-rec-uplink-and-downlink" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink bt-sco-swb">
- <path name="incall-rec-uplink-and-downlink" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink usb-headset-mic">
- <path name="incall-rec-uplink-and-downlink" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink afe-proxy">
- <path name="incall-rec-uplink-and-downlink" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink-compress">
- <path name="incall-rec-uplink-compress" />
- <path name="incall-rec-downlink-compress" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink-compress bt-sco">
- <path name="incall-rec-uplink-and-downlink-compress" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink-compress bt-sco-wb">
- <path name="incall-rec-uplink-and-downlink-compress" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink-compress bt-sco-swb">
- <path name="incall-rec-uplink-and-downlink-compress" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink-compress usb-headset-mic">
- <path name="incall-rec-uplink-and-downlink-compress" />
- </path>
-
- <path name="incall-rec-uplink-and-downlink-compress afe-proxy">
- <path name="incall-rec-uplink-and-downlink-compress" />
- </path>
-
- <path name="hfp-sco">
- </path>
-
- <path name="hfp-sco headphones">
- </path>
-
- <path name="hfp-sco-wb">
- <path name="hfp-sco" />
- </path>
-
- <path name="hfp-sco-wb headphones">
- <path name="hfp-sco headphones" />
- </path>
-
- <path name="compress-voip-call">
- <ctl name="WSA_CDC_DMA_RX_0_Voice Mixer Voip" value="1" />
- <ctl name="Voip_Tx Mixer TX_CDC_DMA_TX_3_Voip" value="1" />
- </path>
-
- <path name="compress-voip-call bt-a2dp">
- <ctl name="SLIM_7_RX_Voice Mixer Voip" value="1" />
- <ctl name="Voip_Tx Mixer TX_CDC_DMA_TX_3_Voip" value="1" />
- </path>
-
- <path name="compress-voip-call headphones">
- <ctl name="RX_CDC_DMA_RX_0_Voice Mixer Voip" value="1" />
- <ctl name="Voip_Tx Mixer TX_CDC_DMA_TX_3_Voip" value="1" />
- </path>
-
-
- <path name="compress-voip-call bt-sco">
- <ctl name="SLIM_7_RX_Voice Mixer Voip" value="1" />
- <ctl name="Voip_Tx Mixer SLIM_7_TX_Voip" value="1" />
- </path>
-
- <path name="compress-voip-call bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="compress-voip-call bt-sco" />
- </path>
-
- <path name="compress-voip-call bt-sco-swb">
- <path name="compress-voip-call bt-sco" />
- </path>
-
- <path name="compress-voip-call afe-proxy">
- <ctl name="AFE_PCM_RX_Voice Mixer Voip" value="1" />
- <ctl name="Voip_Tx Mixer AFE_PCM_TX_Voip" value="1" />
- </path>
-
- <path name="compress-voip-call usb-headphones">
- <ctl name="USB_AUDIO_RX_Voice Mixer Voip" value="1" />
- <ctl name="Voip_Tx Mixer TX_CDC_DMA_TX_3_Voip" value="1" />
- </path>
-
- <path name="compress-voip-call usb-headset">
- <ctl name="USB_AUDIO_RX_Voice Mixer Voip" value="1" />
- <ctl name="Voip_Tx Mixer USB_AUDIO_TX_Voip" value="1" />
- </path>
-
- <path name="voicemmode1-call">
- <ctl name="QUIN_TDM_RX_0 Voice Mixer VoiceMMode1" value="1" />
- <ctl name="VoiceMMode1_Tx Mixer TX_CDC_DMA_TX_3_MMode1" value="1" />
- </path>
-
- <path name="voicemmode1-call handset">
- <ctl name="QUIN_TDM_RX_0 Voice Mixer VoiceMMode1" value="1"/>
- <ctl name="VoiceMMode1_Tx Mixer TX_CDC_DMA_TX_3_MMode1" value="1"/>
- </path>
-
- <path name="voicemmode1-call speaker">
- <ctl name="QUIN_TDM_RX_0 Voice Mixer VoiceMMode1" value="1"/>
- <ctl name="VoiceMMode1_Tx Mixer TX_CDC_DMA_TX_3_MMode1" value="1"/>
- </path>
-
- <path name="voicemmode1-call headphones">
- <ctl name="RX_CDC_DMA_RX_0_Voice Mixer VoiceMMode1" value="1" />
- <ctl name="VoiceMMode1_Tx Mixer TX_CDC_DMA_TX_3_MMode1" value="1" />
- </path>
-
- <path name="voicemmode1-call bt-sco">
- <ctl name="SLIM_7_RX_Voice Mixer VoiceMMode1" value="1" />
- <ctl name="VoiceMMode1_Tx Mixer SLIM_7_TX_MMode1" value="1" />
- </path>
-
- <path name="voicemmode1-call bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="voicemmode1-call bt-sco" />
- </path>
-
- <path name="voicemmode1-call bt-sco-swb">
- <path name="voicemmode1-call bt-sco" />
- </path>
-
- <path name="voicemmode1-call afe-proxy">
- <ctl name="AFE_PCM_RX_Voice Mixer VoiceMMode1" value="1" />
- <ctl name="VoiceMMode1_Tx Mixer AFE_PCM_TX_MMode1" value="1" />
- </path>
-
- <path name="voicemmode1-call usb-headphones">
- <ctl name="USB_AUDIO_RX_Voice Mixer VoiceMMode1" value="1" />
- <ctl name="VoiceMMode1_Tx Mixer TX_CDC_DMA_TX_3_MMode1" value="1" />
- </path>
-
- <path name="voicemmode1-call usb-headset">
- <ctl name="USB_AUDIO_RX_Voice Mixer VoiceMMode1" value="1" />
- <ctl name="VoiceMMode1_Tx Mixer USB_AUDIO_TX_MMode1" value="1" />
- </path>
-
- <path name="voicemmode1-call display-port-and-usb-headset-mic">
- <ctl name="DISPLAY_PORT_RX_Voice Mixer VoiceMMode1" value="1" />
- <ctl name="VoiceMMode1_Tx Mixer USB_AUDIO_TX_MMode1" value="1" />
- </path>
-
- <path name="voicemmode1-call display-port">
- <ctl name="DISPLAY_PORT_RX_Voice Mixer VoiceMMode1" value="1" />
- <ctl name="VoiceMMode1_Tx Mixer TX_CDC_DMA_TX_3_MMode1" value="1" />
- </path>
-
- <path name="voicemmode2-call">
- <ctl name="QUIN_TDM_RX_0 Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer TX_CDC_DMA_TX_3_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call handset">
- <ctl name="QUIN_TDM_RX_0 Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer TX_CDC_DMA_TX_3_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call speaker">
- <ctl name="QUIN_TDM_RX_0 Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer TX_CDC_DMA_TX_3_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call headphones">
- <ctl name="RX_CDC_DMA_RX_0_Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer TX_CDC_DMA_TX_3_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call bt-sco">
- <ctl name="SLIM_7_RX_Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer SLIM_7_TX_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="voicemmode2-call bt-sco" />
- </path>
-
- <path name="voicemmode2-call bt-sco-swb">
- <path name="voicemmode2-call bt-sco" />
- </path>
-
- <path name="voicemmode2-call afe-proxy">
- <ctl name="AFE_PCM_RX_Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer AFE_PCM_TX_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call usb-headphones">
- <ctl name="USB_AUDIO_RX_Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer TX_CDC_DMA_TX_3_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call usb-headset">
- <ctl name="USB_AUDIO_RX_Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer USB_AUDIO_TX_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call display-port-and-usb-headset-mic">
- <ctl name="DISPLAY_PORT_RX_Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer USB_AUDIO_TX_MMode2" value="1" />
- </path>
-
- <path name="voicemmode2-call display-port">
- <ctl name="DISPLAY_PORT_RX_Voice Mixer VoiceMMode2" value="1" />
- <ctl name="VoiceMMode2_Tx Mixer TX_CDC_DMA_TX_3_MMode2" value="1" />
- </path>
-
- <!-- VoIP Rx settings -->
- <path name="audio-playback-voip">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip handset">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip speaker">
- <path name="audio-playback-voip" />
- </path>
-
- <path name="audio-playback-voip speaker-safe">
- <path name="audio-playback-voip" />
- </path>
-
- <path name="audio-playback-voip headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="audio-playback-voip bt-sco" />
- </path>
-
- <path name="audio-playback-voip bt-sco-swb">
- <path name="audio-playback-voip bt-sco" />
- </path>
-
- <path name="audio-playback-voip bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="audio-playback-voip speaker-and-display-port">
- <path name="audio-playback-voip display-port" />
- <path name="audio-playback-voip" />
- </path>
-
- <!-- VoIP Tx settings -->
- <path name="audio-record-voip">
- <ctl name="MultiMedia10 Mixer TX_CDC_DMA_TX_3" value="1" />
- </path>
-
- <path name="audio-record-voip usb-headset-mic">
- <ctl name="MultiMedia10 Mixer USB_AUDIO_TX" value="1" />
- </path>
-
- <path name="audio-record-voip bt-sco">
- <ctl name="MultiMedia10 Mixer SLIM_7_TX" value="1" />
- </path>
-
- <path name="audio-record-voip bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="audio-record-voip bt-sco" />
- </path>
-
- <path name="audio-record-voip bt-sco-swb">
- <path name="audio-record-voip bt-sco" />
- </path>
-
- <path name="spkr-rx-calib">
- <ctl name="WSA_CDC_DMA_RX_0_DL_HL Switch" value="1" />
- </path>
-
- <path name="spkr-vi-record">
- </path>
-
- <!-- These are actual sound device specific mixer settings -->
- <path name="amic2">
- <ctl name="TX DEC0 MUX" value="SWR_MIC" />
- <ctl name="TX SMIC MUX0" value="ADC1" />
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="ADC2_MIXER Switch" value="1" />
- <ctl name="ADC2 MUX" value="INP2" />
- </path>
-
- <path name="dmic1">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC0" />
- </path>
-
- <path name="dmic2">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC1" />
- </path>
-
- <path name="dmic3">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC2" />
- </path>
-
- <path name="dmic4">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC3" />
- </path>
-
- <path name="dmic5">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC4" />
- </path>
-
- <path name="dmic6">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="One" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC5" />
- </path>
-
- <path name="handset">
- <ctl name="Main AMP Enable Switch" value="1"/>
- <ctl name="R Main AMP Enable Switch" value="0"/>
- </path>
-
- <path name="speaker">
- <ctl name="Main AMP Enable Switch" value="1"/>
- <ctl name="R Main AMP Enable Switch" value="1"/>
- </path>
-
- <path name="speaker-mono">
- <ctl name="Main AMP Enable Switch" value="0"/>
- <ctl name="R Main AMP Enable Switch" value="1"/>
- </path>
-
- <path name="speaker-mono-2">
- <ctl name="WSA_CDC_DMA_RX_0 Channels" value="One" />
- <ctl name="WSA RX1 MUX" value="AIF1_PB" />
- <ctl name="WSA_RX1 INP0" value="RX1" />
- <ctl name="WSA_COMP2 Switch" value="1" />
- <ctl name="SpkrRight COMP Switch" value="1" />
- <ctl name="SpkrRight BOOST Switch" value="1" />
- <ctl name="SpkrRight VISENSE Switch" value="1" />
- <ctl name="SpkrRight SWR DAC_Port Switch" value="1" />
- </path>
-
- <path name="speaker-safe">
- <path name="speaker-mono"/>
- </path>
-
- <path name="speaker-hdk">
- <path name="speaker-mono" />
- </path>
-
- <path name="speaker-fluid">
- <path name="speaker-mono" />
- </path>
-
- <path name="speaker-liquid">
- <path name="speaker" />
- </path>
-
- <path name="sidetone-iir">
- <ctl name="IIR0 Enable Band1" value="1" />
- <ctl name="IIR0 Enable Band2" value="1" />
- <ctl name="IIR0 Enable Band3" value="1" />
- <ctl name="IIR0 Enable Band4" value="1" />
- <ctl name="IIR0 Enable Band5" value="1" />
- </path>
-
- <path name="sidetone-headphones">
- <path name="sidetone-iir" />
- <ctl name="IIR0 INP0 Volume" value="54" />
- <ctl name="IIR0 INP0 MUX" value="DEC0" />
- <ctl name="RX INT0 MIX2 INP" value="SRC0" />
- <ctl name="RX INT1 MIX2 INP" value="SRC0" />
- </path>
-
- <path name="sidetone-handset">
- <path name="sidetone-iir" />
- <ctl name="IIR0 INP0 Volume" value="54" />
- <ctl name="IIR0 INP0 MUX" value="DEC0" />
- <ctl name="RX INT2 MIX2 INP" value="SRC0" />
- <ctl name="WSA_RX0 INT0 SIDETONE MIX" value="SRC0" />
- </path>
-
- <path name="afe-sidetone">
- <ctl name="Voice Sidetone Enable" value="1" />
- </path>
-
- <path name="speaker-mic">
- <path name="dmic5" />
- </path>
-
- <path name="speaker-mic-liquid">
- <path name="dmic5" />
- </path>
-
- <path name="speaker-mic-sbc">
- </path>
-
- <path name="speaker-protected">
- <ctl name="WSA_AIF_VI Mixer WSA_SPKR_VI_1" value="1" />
- <ctl name="WSA_AIF_VI Mixer WSA_SPKR_VI_2" value="1" />
- <ctl name="WSA_CDC_DMA_0 TX Format" value="PACKED_16B" />
- <path name="speaker" />
- <ctl name="VI_FEED_TX Channels" value="Two" />
- <ctl name="WSA_RX_0_VI_FB_LCH_MUX" value="WSA_CDC_DMA_TX_0" />
- <ctl name="WSA_RX_0_VI_FB_RCH_MUX" value="WSA_CDC_DMA_TX_0" />
- </path>
-
- <path name="voice-speaker-protected">
- <ctl name="WSA_AIF_VI Mixer WSA_SPKR_VI_1" value="1" />
- <ctl name="WSA_CDC_DMA_0 TX Format" value="PACKED_16B" />
- <path name="speaker-mono" />
- <ctl name="VI_FEED_TX Channels" value="One" />
- <ctl name="WSA_RX_0_VI_FB_LCH_MUX" value="WSA_CDC_DMA_TX_0" />
- </path>
-
- <path name="voice-speaker-2-protected">
- <ctl name="WSA_AIF_VI Mixer WSA_SPKR_VI_2" value="1" />
- <ctl name="WSA_CDC_DMA_0 TX Format" value="PACKED_16B" />
- <path name="speaker-mono-2" />
- <ctl name="VI_FEED_TX Channels" value="One" />
- <ctl name="WSA_RX_0_VI_FB_RCH_MUX" value="WSA_CDC_DMA_TX_0" />
- </path>
-
- <path name="voice-speaker-stereo-protected">
- <path name="speaker-protected" />
- </path>
-
- <path name="vi-feedback">
- </path>
-
- <path name="vi-feedback-mono-1">
- </path>
-
- <path name="vi-feedback-mono-2">
- </path>
-
- <path name="handset">
- <ctl name="WSA_CDC_DMA_RX_0 Channels" value="One" />
- <ctl name="WSA RX0 MUX" value="AIF1_PB" />
- <ctl name="WSA_RX0 INP0" value="RX0" />
- <ctl name="WSA_COMP1 Switch" value="1" />
- <ctl name="SpkrLeft COMP Switch" value="1" />
- <ctl name="SpkrLeft BOOST Switch" value="1" />
- <ctl name="SpkrLeft VISENSE Switch" value="1" />
- <ctl name="SpkrLeft SWR DAC_Port Switch" value="1" />
- <ctl name="EAR SPKR PA Gain" value="G_6_DB" />
- </path>
-
- <path name="handset-mic">
- <ctl name="Sto1 ADC MIXL DMIC Switch" value="1" />
- </path>
-
- <path name="1st-mic-only">
- <ctl name="PRI TDM TX Channel Offset" id="0" value="0" />
- <ctl name="ADC1 Capture Volume" value="60"/>
- <ctl name="Sto1 ADC MIXL DMIC Switch" value="1" />
- <ctl name="MultiMedia1 Mixer PRI_TDM_TX_0" value="1" />
- </path>
-
- <path name="2nd-mic-only">
- <ctl name="PRI TDM TX Channel Offset" id="0" value="8" />
- <ctl name="ADC2 Capture Volume" value="60"/>
- <ctl name="Sto2 ADC MIXL DMIC Switch" value="1" />
- <ctl name="MultiMedia1 Mixer PRI_TDM_TX_0" value="1" />
- </path>
-
- <path name="3rd-mic-only">
- <ctl name="PRI TDM TX Channel Offset" id="0" value="12" />
- <ctl name="ADC2 Capture Volume" value="60"/>
- <ctl name="Sto2 ADC MIXL DMIC Switch" value="1" />
- <ctl name="MultiMedia1 Mixer PRI_TDM_TX_0" value="1" />
- </path>
-
- <path name="headphones">
- <ctl name="RX_MACRO RX0 MUX" value="AIF1_PB" />
- <ctl name="RX_MACRO RX1 MUX" value="AIF1_PB" />
- <ctl name="RX_CDC_DMA_RX_0 Channels" value="Two" />
- <ctl name="RX INT0_1 MIX1 INP0" value="RX0" />
- <ctl name="RX INT1_1 MIX1 INP0" value="RX1" />
- <ctl name="RX INT0 DEM MUX" value="CLSH_DSM_OUT" />
- <ctl name="RX INT1 DEM MUX" value="CLSH_DSM_OUT" />
- <ctl name="RX_HPH_PWR_MODE" value="LOHIFI" />
- <ctl name="RX HPH Mode" value="CLS_H_LOHIFI" />
- <ctl name="RX_COMP1 Switch" value="1" />
- <ctl name="RX_COMP2 Switch" value="1" />
- <ctl name="HPHL_COMP Switch" value="1" />
- <ctl name="HPHR_COMP Switch" value="1" />
- <ctl name="HPHL_RDAC Switch" value="1" />
- <ctl name="HPHR_RDAC Switch" value="1" />
- </path>
-
- <path name="headphones-44.1">
- <path name="headphones" />
- </path>
-
- <path name="hph-highquality-mode">
- </path>
-
- <path name="hph-lowpower-mode">
- </path>
-
- <path name="true-native-mode">
- </path>
-
- <path name="line">
- <path name="headphones" />
- </path>
-
- <path name="headset-mic">
- <path name="amic2" />
- <ctl name="TX_DEC0 Volume" value="84" />
- </path>
-
- <path name="headset-mic-liquid">
- <path name="amic2" />
- </path>
- <path name="voice-handset">
- <path name="handset" />
- </path>
-
- <path name="voice-handset-tmus">
- <path name="handset" />
- </path>
-
- <path name="voice-handset-hdk">
- <path name="handset" />
- </path>
-
- <path name="voice-handset-tmus-hdk">
- <path name="handset" />
- </path>
- <path name="voice-speaker">
- <path name="speaker-mono" />
- </path>
-
- <path name="voice-speaker-stereo">
- <path name="speaker" />
- </path>
-
- <path name="voice-speaker-2">
- <path name="speaker-mono-2" />
- </path>
-
- <path name="voice-speaker-hdk">
- <path name="speaker-mono" />
- </path>
-
- <path name="voice-speaker-fluid">
- <path name="speaker-fluid" />
- </path>
-
- <path name="voice-speaker-vbat">
- <path name="speaker-vbat-mono" />
- </path>
-
- <path name="voice-speaker-2-vbat">
- <path name="speaker-vbat-mono-2" />
- </path>
-
- <path name="voice-speaker-mic">
- <path name="speaker-mic" />
- </path>
-
- <path name="voice-headphones">
- <path name="headphones" />
- </path>
-
- <path name="voice-line">
- <path name="voice-headphones" />
- </path>
-
- <path name="voice-headset-mic">
- <path name="headset-mic" />
- </path>
-
- <path name="speaker-and-headphones">
- <path name="headphones" />
- <path name="speaker" />
- </path>
-
- <path name="speaker-and-line">
- <path name="speaker-and-headphones" />
- </path>
-
- <path name="speaker-and-headphones-liquid">
- <path name="headphones" />
- <path name="speaker" />
- </path>
-
- <path name="speaker-and-line-liquid">
- <path name="speaker-and-headphones-liquid" />
- </path>
-
- <path name="usb-headphones">
- </path>
-
- <path name="usb-headset">
- </path>
-
- <path name="afe-proxy">
- </path>
-
- <path name="display-port">
- </path>
-
- <path name="speaker-and-usb-headphones">
- <path name="speaker" />
- <path name="usb-headphones" />
- </path>
-
- <path name="speaker-and-display-port">
- <path name="speaker" />
- <path name="display-port" />
- </path>
-
- <path name="voice-rec-mic">
- <path name="handset-mic" />
- </path>
-
- <path name="camcorder-mic">
- <path name="handset-mic" />
- </path>
-
- <path name="bt-sco-headset">
- </path>
-
- <path name="bt-sco-mic">
- </path>
-
- <path name="bt-sco-headset-wb">
- </path>
-
- <path name="bt-sco-mic-wb">
- </path>
-
- <path name="bt-sco-headset-swb">
- </path>
-
- <path name="bt-sco-mic-swb">
- </path>
-
- <path name="usb-headset-mic">
- </path>
-
- <path name="capture-fm">
- </path>
-
- <!-- Dual MIC devices -->
- <path name="handset-dmic-endfire">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="Two" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC1" />
- <ctl name="TX_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="TX DMIC MUX1" value="DMIC3" />
- </path>
-
- <path name="speaker-dmic-endfire">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="Two" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC4" />
- <ctl name="TX_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="TX DMIC MUX1" value="DMIC1" />
- </path>
-
- <path name="dmic-endfire">
- <path name="handset-dmic-endfire" />
- <ctl name="IIR0 INP0 MUX" value="DEC0" />
- </path>
-
- <path name="dmic-endfire-liquid">
- <path name="handset-dmic-endfire" />
- <ctl name="IIR0 INP0 MUX" value="DEC7" />
- </path>
-
- <path name="handset-stereo-dmic-ef">
- <path name="handset-dmic-endfire" />
- </path>
-
- <path name="speaker-stereo-dmic-ef">
- <path name="speaker-dmic-endfire" />
- </path>
-
- <path name="voice-dmic-ef-tmus">
- <path name="dmic-endfire" />
- </path>
-
- <path name="voice-dmic-ef">
- <path name="dmic-endfire" />
- </path>
-
- <path name="voice-speaker-dmic-ef">
- <path name="speaker-dmic-endfire" />
- </path>
-
- <path name="voice-rec-dmic-ef">
- <path name="dmic-endfire" />
- </path>
-
- <path name="voice-rec-dmic-ef-fluence">
- <path name="dmic-endfire" />
- </path>
-
- <path name="handset-stereo-dmic-ef-liquid">
- <path name="handset-dmic-endfire" />
- </path>
-
- <path name="speaker-stereo-dmic-ef-liquid">
- <path name="speaker-dmic-endfire" />
- </path>
-
- <path name="voice-dmic-ef-liquid-liquid">
- <path name="dmic-endfire-liquid" />
- </path>
-
- <path name="voice-speaker-dmic-ef-liquid">
- <path name="dmic-endfire-liquid" />
- </path>
-
- <path name="voice-rec-dmic-ef-liquid">
- <path name="dmic-endfire-liquid" />
- </path>
-
- <path name="voice-rec-dmic-ef-fluence-liquid">
- <path name="dmic-endfire-liquid" />
- </path>
- <path name="speaker-dmic-broadside">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="Two" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC4" />
- <ctl name="TX_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="TX DMIC MUX1" value="DMIC1" />
- </path>
-
- <path name="dmic-broadside">
- <path name="speaker-dmic-broadside" />
- <ctl name="IIR0 INP0 MUX" value="DEC0" />
- </path>
-
- <path name="voice-speaker-dmic-broadside">
- <path name="dmic-broadside" />
- </path>
-
- <!-- Tri MIC devices -->
- <path name="three-mic">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="Three" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC3" />
- <ctl name="TX_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="TX DMIC MUX1" value="DMIC0" />
- <ctl name="TX_AIF1_CAP Mixer DEC2" value="1" />
- <ctl name="TX DMIC MUX2" value="DMIC2" />
- </path>
-
- <path name="speaker-tmic">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="Three" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC4" />
- <ctl name="TX_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="TX DMIC MUX1" value="DMIC1" />
- <ctl name="TX_AIF1_CAP Mixer DEC2" value="1" />
- <ctl name="TX DMIC MUX2" value="DMIC3" />
- </path>
-
- <path name="voice-speaker-tmic">
- <path name="speaker-tmic" />
- </path>
-
- <!-- Quad MIC devices -->
- <path name="speaker-qmic">
- <ctl name="TX_CDC_DMA_TX_3 Channels" value="Four" />
- <ctl name="TX_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="TX DMIC MUX0" value="DMIC4" />
- <ctl name="TX_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="TX DMIC MUX1" value="DMIC1" />
- <ctl name="TX_AIF1_CAP Mixer DEC2" value="1" />
- <ctl name="TX DMIC MUX2" value="DMIC3" />
- <ctl name="TX_AIF1_CAP Mixer DEC3" value="1" />
- <ctl name="TX DMIC MUX3" value="DMIC0" />
- </path>
-
- <path name="speaker-qmic-liquid">
- </path>
-
- <path name="voice-speaker-qmic">
- <path name="speaker-qmic" />
- </path>
-
- <path name="quad-mic">
- <path name="speaker-qmic" />
- </path>
-
- <path name="voice-speaker-qmic-liquid">
- <path name="speaker-qmic-liquid" />
- </path>
-
- <path name="quad-mic-liquid">
- <path name="speaker-qmic-liquid" />
- </path>
-
- <!-- TTY devices -->
-
- <path name="tty-headphones">
- <ctl name="RX_MACRO RX0 MUX" value="AIF1_PB" />
- <ctl name="RX INT0_1 MIX1 INP0" value="RX0" />
- <ctl name="RX INT0 DEM MUX" value="CLSH_DSM_OUT" />
- <ctl name="RX_COMP1 Switch" value="1" />
- <ctl name="HPHL_COMP Switch" value="1" />
- <ctl name="HPHL_RDAC Switch" value="1" />
- </path>
-
- <path name="voice-tty-full-headphones">
- <ctl name="TTY Mode" value="FULL" />
- <path name="tty-headphones" />
- </path>
-
- <path name="voice-tty-vco-headphones">
- <ctl name="TTY Mode" value="VCO" />
- <path name="tty-headphones" />
- </path>
-
- <path name="voice-tty-hco-handset">
- <ctl name="TTY Mode" value="HCO" />
- <path name="handset" />
- </path>
-
-
- <path name="voice-tty-hco-handset-hdk">
- <ctl name="TTY Mode" value="HCO" />
- <path name="handset" />
- </path>
-
- <path name="voice-tty-full-headset-mic">
- <path name="amic2" />
- <ctl name="ADC2 Volume" value="0" />
- <ctl name="TX_DEC0 Volume" value="84" />
- </path>
-
- <path name="voice-tty-hco-headset-mic">
- <path name="voice-tty-full-headset-mic" />
- </path>
-
- <path name="voice-tty-vco-handset-mic">
- <path name="dmic3" />
- </path>
-
- <path name="unprocessed-handset-mic">
- <path name="handset-mic" />
- </path>
-
- <path name="unprocessed-mic">
- <path name="unprocessed-handset-mic" />
- </path>
-
- <path name="unprocessed-stereo-mic">
- <path name="voice-rec-dmic-ef" />
- </path>
-
- <path name="unprocessed-three-mic">
- <path name="three-mic" />
- </path>
-
- <path name="unprocessed-quad-mic">
- <path name="quad-mic" />
- </path>
-
- <path name="unprocessed-headset-mic">
- <path name="headset-mic" />
- </path>
-
- <!-- USB TTY start -->
-
- <!-- full: both end tty -->
- <path name="voice-tty-full-usb">
- <ctl name="TTY Mode" value="FULL" />
- <path name="usb-headphones" />
- </path>
-
- <path name="voice-tty-full-usb-mic">
- <path name="usb-headset-mic" />
- </path>
-
- <!-- vco, in: handset mic use existing, out: tty -->
- <path name="voice-tty-vco-usb">
- <ctl name="TTY Mode" value="VCO" />
- <path name="usb-headphones" />
- </path>
-
- <!-- hco, in: tty, out: speaker, use existing handset -->
- <path name="voice-tty-hco-usb-mic">
- <path name="voice-tty-full-usb-mic" />
- </path>
-
- <!-- USB TTY end -->
-
- <!-- Added for ADSP testfwk -->
- <path name="ADSP testfwk">
- <ctl name="WSA_CDC_DMA_RX_0_DL_HL Switch" value="1" />
- </path>
-
- <path name="bt-a2dp">
- <ctl name="SLIM7_RX ADM Channels" value="Two" />
- </path>
-
- <path name="speaker-and-bt-a2dp">
- <path name="speaker" />
- <path name="bt-a2dp" />
- </path>
-
- <path name="deep-buffer-playback bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia1" value="1" />
- </path>
-
- <path name="low-latency-playback bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia5" value="1" />
- </path>
-
- <path name="compress-offload-playback bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia4" value="1" />
- </path>
-
- <path name="compress-offload-playback2 bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia7" value="1" />
- </path>
-
- <path name="compress-offload-playback3 bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia10" value="1" />
- </path>
-
- <path name="compress-offload-playback4 bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia11" value="1" />
- </path>
-
- <path name="compress-offload-playback5 bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia12" value="1" />
- </path>
-
- <path name="compress-offload-playback6 bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia13" value="1" />
- </path>
-
- <path name="compress-offload-playback7 bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia14" value="1" />
- </path>
-
- <path name="compress-offload-playback8 bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia15" value="1" />
- </path>
-
- <path name="compress-offload-playback9 bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="audio-ull-playback bt-a2dp">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia8" value="1" />
- </path>
-
- <path name="deep-buffer-playback speaker-and-bt-a2dp">
- <path name="deep-buffer-playback bt-a2dp" />
- <path name="deep-buffer-playback" />
- </path>
-
- <path name="compress-offload-playback speaker-and-bt-a2dp">
- <path name="compress-offload-playback bt-a2dp" />
- <path name="compress-offload-playback" />
- </path>
-
- <path name="low-latency-playback speaker-and-bt-a2dp">
- <path name="low-latency-playback bt-a2dp" />
- <path name="low-latency-playback" />
- </path>
-
- <path name="compress-offload-playback2 speaker-and-bt-a2dp">
- <path name="compress-offload-playback2 bt-a2dp" />
- <path name="compress-offload-playback2" />
- </path>
-
- <path name="compress-offload-playback3 speaker-and-bt-a2dp">
- <path name="compress-offload-playback3 bt-a2dp" />
- <path name="compress-offload-playback3" />
- </path>
-
- <path name="compress-offload-playback4 speaker-and-bt-a2dp">
- <path name="compress-offload-playback4 bt-a2dp" />
- <path name="compress-offload-playback4" />
- </path>
-
- <path name="compress-offload-playback5 speaker-and-bt-a2dp">
- <path name="compress-offload-playback5 bt-a2dp" />
- <path name="compress-offload-playback5" />
- </path>
-
- <path name="compress-offload-playback6 speaker-and-bt-a2dp">
- <path name="compress-offload-playback6 bt-a2dp" />
- <path name="compress-offload-playback6" />
- </path>
-
- <path name="compress-offload-playback7 speaker-and-bt-a2dp">
- <path name="compress-offload-playback7 bt-a2dp" />
- <path name="compress-offload-playback7" />
- </path>
-
- <path name="compress-offload-playback8 speaker-and-bt-a2dp">
- <path name="compress-offload-playback8 bt-a2dp" />
- <path name="compress-offload-playback8" />
- </path>
-
- <path name="compress-offload-playback9 speaker-and-bt-a2dp">
- <path name="compress-offload-playback9 bt-a2dp" />
- <path name="compress-offload-playback9" />
- </path>
-
- <path name="audio-ull-playback speaker-and-bt-a2dp">
- <path name="audio-ull-playback bt-a2dp" />
- <path name="audio-ull-playback" />
- </path>
-
- <path name="mmap-playback">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback handset">
- <ctl name="QUIN_TDM_RX_0 Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback speaker">
- <path name="mmap-playback" />
- </path>
-
- <path name="mmap-playback speaker-safe">
- <path name="mmap-playback" />
- </path>
-
- <path name="mmap-playback headphones">
- <ctl name="RX_CDC_DMA_RX_0 Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback speaker-and-headphones">
- <path name="mmap-playback" />
- <path name="mmap-playback headphones" />
- </path>
-
- <path name="mmap-playback bt-sco">
- <ctl name="SLIMBUS_7_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="mmap-playback bt-sco" />
- </path>
-
- <path name="mmap-playback bt-sco-swb">
- <path name="mmap-playback bt-sco" />
- </path>
-
- <path name="mmap-playback afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback hdmi">
- <ctl name="HDMI Mixer MultiMedia16" value="1" />
- </path>
-
- <path name="mmap-playback speaker-and-hdmi">
- <path name="mmap-playback hdmi" />
- <path name="mmap-playback" />
- </path>
-
- <path name="mmap-playback speaker-and-display-port">
- <path name="mmap-playback display-port" />
- <path name="mmap-playback" />
- </path>
-
- <path name="mmap-playback speaker-and-usb-headphones">
- <path name="mmap-playback usb-headphones" />
- <path name="mmap-playback" />
- </path>
-
- <path name="mmap-record">
- <ctl name="MultiMedia16 Mixer TX_CDC_DMA_TX_3" value="1" />
- </path>
-
- <path name="mmap-record bt-sco">
- <ctl name="MultiMedia16 Mixer SLIM_7_TX" value="1" />
- </path>
-
- <path name="mmap-record bt-sco-wb">
- <ctl name="BT SampleRate" value="KHZ_16" />
- <path name="mmap-record bt-sco" />
- </path>
-
- <path name="mmap-record bt-sco-swb">
- <path name="mmap-record bt-sco" />
- </path>
-
- <path name="mmap-record capture-fm">
- <ctl name="MultiMedia16 Mixer SLIM_8_TX" value="1" />
- </path>
-
- <path name="mmap-record usb-headset-mic">
- <ctl name="MultiMedia16 Mixer USB_AUDIO_TX" value="1" />
- </path>
-
- <path name="hifi-playback display-port">
- <ctl name="DISPLAY_PORT Mixer MultiMedia2" value="1" />
- </path>
-
- <path name="hifi-playback afe-proxy">
- <ctl name="AFE_PCM_RX Audio Mixer MultiMedia2" value="1" />
- </path>
-
- <path name="hifi-playback usb-headset">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia2" value="1" />
- </path>
-
- <path name="hifi-playback usb-headphones">
- <ctl name="USB_AUDIO_RX Audio Mixer MultiMedia2" value="1" />
- </path>
-
- <path name="hifi-record">
- <ctl name="MultiMedia2 Mixer TX_CDC_DMA_TX_3" value="1" />
- </path>
-
- <path name="hifi-record usb-headset-mic">
- <ctl name="MultiMedia2 Mixer USB_AUDIO_TX" value="1" />
- </path>
-
- <path name="incall_music_uplink">
- <ctl name="Incall_Music Audio Mixer MultiMedia9" value="1" />
- </path>
-
- <path name="incall_music_uplink speaker">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink handset">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink handset-hac">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink display-port">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink bt-sco">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink bt-sco-wb">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink bt-sco-swb">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink speaker-and-display-port">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink afe-proxy">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink usb-headphones">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink usb-headset">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink speaker-and-usb-headphones">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink headphones">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink speaker-and-headphones">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink speaker-and-bt-sco">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink voice-tty-hco-handset">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink speaker-and-bt-a2dp">
- <path name="incall_music_uplink" />
- </path>
-
- <path name="incall_music_uplink bt-a2dp">
- <path name="incall_music_uplink" />
- </path>
- <path name="incall_music_uplink afe-proxy">
- <path name="incall_music_uplink" />
- </path>
-</mixer>
diff --git a/audio/rt5514_dsp_fw1.bin b/audio/rt5514_dsp_fw1.bin
deleted file mode 100644
index f64b5db..0000000
--- a/audio/rt5514_dsp_fw1.bin
+++ /dev/null
Binary files differ
diff --git a/audio/rt5514_dsp_fw2.bin b/audio/rt5514_dsp_fw2.bin
deleted file mode 100644
index 173fd98..0000000
--- a/audio/rt5514_dsp_fw2.bin
+++ /dev/null
Binary files differ
diff --git a/audio/rt5514_dsp_fw3.bin b/audio/rt5514_dsp_fw3.bin
deleted file mode 100644
index 5b24462..0000000
--- a/audio/rt5514_dsp_fw3.bin
+++ /dev/null
Binary files differ
diff --git a/audio/rt5514_dsp_fw4.bin b/audio/rt5514_dsp_fw4.bin
deleted file mode 100644
index 06274e5..0000000
--- a/audio/rt5514_dsp_fw4.bin
+++ /dev/null
Binary files differ
diff --git a/audio/sound_trigger_mixer_paths.xml b/audio/sound_trigger_mixer_paths.xml
deleted file mode 100644
index 8cb6622..0000000
--- a/audio/sound_trigger_mixer_paths.xml
+++ /dev/null
@@ -1,292 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!--- Copyright (c) 2014-2019, The Linux Foundation. All rights reserved. -->
-<!--- -->
-<!--- Redistribution and use in source and binary forms, with or without -->
-<!--- modification, are permitted provided that the following conditions are -->
-<!--- met: -->
-<!--- * Redistributions of source code must retain the above copyright -->
-<!--- notice, this list of conditions and the following disclaimer. -->
-<!--- * Redistributions in binary form must reproduce the above -->
-<!--- copyright notice, this list of conditions and the following -->
-<!--- disclaimer in the documentation and/or other materials provided -->
-<!--- with the distribution. -->
-<!--- * Neither the name of The Linux Foundation nor the names of its -->
-<!--- contributors may be used to endorse or promote products derived -->
-<!--- from this software without specific prior written permission. -->
-<!--- -->
-<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
-<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
-<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
-<!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
-<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
-<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
-<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
-<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
-<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -->
-<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
-<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
-
-<mixer>
- <!-- These are the initial mixer settings -->
- <ctl name="LSM1 Mixer VA_CDC_DMA_TX_0" value="0" />
- <ctl name="LSM2 Mixer VA_CDC_DMA_TX_0" value="0" />
- <ctl name="LSM3 Mixer VA_CDC_DMA_TX_0" value="0" />
- <ctl name="LSM4 Mixer VA_CDC_DMA_TX_0" value="0" />
- <ctl name="LSM5 Mixer VA_CDC_DMA_TX_0" value="0" />
- <ctl name="LSM6 Mixer VA_CDC_DMA_TX_0" value="0" />
- <ctl name="LSM7 Mixer VA_CDC_DMA_TX_0" value="0" />
- <ctl name="LSM8 Mixer VA_CDC_DMA_TX_0" value="0" />
- <ctl name="LSM1 Port" value="None" />
- <ctl name="LSM2 Port" value="None" />
- <ctl name="LSM3 Port" value="None" />
- <ctl name="LSM4 Port" value="None" />
- <ctl name="LSM5 Port" value="None" />
- <ctl name="LSM6 Port" value="None" />
- <ctl name="LSM7 Port" value="None" />
- <ctl name="LSM8 Port" value="None" />
- <ctl name="VA_CDC_DMA_TX_0 Channels" value="One" />
- <ctl name="VA_AIF1_CAP Mixer DEC0" value="0" />
- <ctl name="VA_AIF1_CAP Mixer DEC1" value="0" />
- <ctl name="VA_AIF1_CAP Mixer DEC2" value="0" />
- <ctl name="VA_AIF1_CAP Mixer DEC3" value="0" />
- <ctl name="VA_AIF1_CAP Mixer DEC4" value="0" />
- <ctl name="VA_AIF1_CAP Mixer DEC5" value="0" />
- <ctl name="VA_AIF1_CAP Mixer DEC6" value="0" />
- <ctl name="VA_AIF1_CAP Mixer DEC7" value="0" />
- <ctl name="VA DEC0 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC1 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC2 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC3 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC4 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC5 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC6 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC7 MUX" value="MSM_DMIC" />
- <ctl name="VA DMIC MUX0" value="ZERO" />
- <ctl name="VA DMIC MUX1" value="ZERO" />
- <ctl name="VA DMIC MUX2" value="ZERO" />
- <ctl name="VA DMIC MUX3" value="ZERO" />
- <ctl name="VA DMIC MUX4" value="ZERO" />
- <ctl name="VA DMIC MUX5" value="ZERO" />
- <ctl name="VA DMIC MUX6" value="ZERO" />
- <ctl name="VA DMIC MUX7" value="ZERO" />
- <ctl name="VA SMIC MUX0" value="ZERO" />
- <ctl name="VA SMIC MUX1" value="ZERO" />
- <ctl name="VA SMIC MUX2" value="ZERO" />
- <ctl name="VA SMIC MUX3" value="ZERO" />
- <ctl name="VA SMIC MUX4" value="ZERO" />
- <ctl name="VA SMIC MUX5" value="ZERO" />
- <ctl name="VA SMIC MUX6" value="ZERO" />
- <ctl name="VA SMIC MUX7" value="ZERO" />
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="None"/>
- <ctl name="EC Reference Channels" value="Zero"/>
- <ctl name="EC Reference Bit Format" value="0"/>
- <ctl name="EC Reference SampleRate" value="0"/>
-
- <path name="listen-voice-wakeup-1">
- <ctl name="LSM1 Mixer VA_CDC_DMA_TX_0" value="1" />
- </path>
-
- <path name="listen-voice-wakeup-2">
- <ctl name="LSM2 Mixer VA_CDC_DMA_TX_0" value="1" />
- </path>
-
- <path name="listen-voice-wakeup-3">
- <ctl name="LSM3 Mixer VA_CDC_DMA_TX_0" value="1" />
- </path>
-
- <path name="listen-voice-wakeup-4">
- <ctl name="LSM4 Mixer VA_CDC_DMA_TX_0" value="1" />
- </path>
-
- <path name="listen-voice-wakeup-5">
- <ctl name="LSM5 Mixer VA_CDC_DMA_TX_0" value="1" />
- </path>
-
- <path name="listen-voice-wakeup-6">
- <ctl name="LSM6 Mixer VA_CDC_DMA_TX_0" value="1" />
- </path>
-
- <path name="listen-voice-wakeup-7">
- <ctl name="LSM7 Mixer VA_CDC_DMA_TX_0" value="1" />
- </path>
-
- <path name="listen-voice-wakeup-8">
- <ctl name="LSM8 Mixer VA_CDC_DMA_TX_0" value="1" />
- </path>
-
- <path name="listen-voice-wakeup-1 preproc">
- <path name="listen-voice-wakeup-1" />
- </path>
-
- <path name="listen-voice-wakeup-2 preproc">
- <path name="listen-voice-wakeup-2" />
- </path>
-
- <path name="listen-voice-wakeup-3 preproc">
- <path name="listen-voice-wakeup-3" />
- </path>
-
- <path name="listen-voice-wakeup-4 preproc">
- <path name="listen-voice-wakeup-4" />
- </path>
-
- <path name="listen-voice-wakeup-5 preproc">
- <path name="listen-voice-wakeup-5" />
- </path>
-
- <path name="listen-voice-wakeup-6 preproc">
- <path name="listen-voice-wakeup-6" />
- </path>
-
- <path name="listen-voice-wakeup-7 preproc">
- <path name="listen-voice-wakeup-7" />
- </path>
-
- <path name="listen-voice-wakeup-8 preproc">
- <path name="listen-voice-wakeup-8" />
- </path>
-
- <path name="listen-voice-wakeup-1 port">
- <ctl name="LSM1 Port" value="VA_CDC_DMA_TX_0" />
- </path>
-
- <path name="listen-voice-wakeup-2 port">
- <ctl name="LSM2 Port" value="VA_CDC_DMA_TX_0" />
- </path>
-
- <path name="listen-voice-wakeup-3 port">
- <ctl name="LSM3 Port" value="VA_CDC_DMA_TX_0" />
- </path>
-
- <path name="listen-voice-wakeup-4 port">
- <ctl name="LSM4 Port" value="VA_CDC_DMA_TX_0" />
- </path>
-
- <path name="listen-voice-wakeup-5 port">
- <ctl name="LSM5 Port" value="VA_CDC_DMA_TX_0" />
- </path>
-
- <path name="listen-voice-wakeup-6 port">
- <ctl name="LSM6 Port" value="VA_CDC_DMA_TX_0" />
- </path>
-
- <path name="listen-voice-wakeup-7 port">
- <ctl name="LSM7 Port" value="VA_CDC_DMA_TX_0" />
- </path>
-
- <path name="listen-voice-wakeup-8 port">
- <ctl name="LSM8 Port" value="VA_CDC_DMA_TX_0" />
- </path>
-
- <path name="listen-voice-wakeup-1 preproc port">
- <ctl name="LSM1 Port" value="ADM_LSM_TX" />
- </path>
-
- <path name="listen-voice-wakeup-2 preproc port">
- <ctl name="LSM2 Port" value="ADM_LSM_TX" />
- </path>
-
- <path name="listen-voice-wakeup-3 preproc port">
- <ctl name="LSM3 Port" value="ADM_LSM_TX" />
- </path>
-
- <path name="listen-voice-wakeup-4 preproc port">
- <ctl name="LSM4 Port" value="ADM_LSM_TX" />
- </path>
-
- <path name="listen-voice-wakeup-5 preproc port">
- <ctl name="LSM5 Port" value="ADM_LSM_TX" />
- </path>
-
- <path name="listen-voice-wakeup-6 preproc port">
- <ctl name="LSM6 Port" value="ADM_LSM_TX" />
- </path>
-
- <path name="listen-voice-wakeup-7 preproc port">
- <ctl name="LSM7 Port" value="ADM_LSM_TX" />
- </path>
-
- <path name="listen-voice-wakeup-8 preproc port">
- <ctl name="LSM8 Port" value="ADM_LSM_TX" />
- </path>
-
- <path name="listen-ape-handset-mic">
- <ctl name="VA_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="VA DEC0 MUX" value="MSM_DMIC" />
- <ctl name="VA DMIC MUX0" value="DMIC4" />
- </path>
-
- <path name="listen-ape-handset-mic-preproc">
- <path name="listen-ape-handset-mic" />
- </path>
-
- <path name="listen-ape-handset-dmic">
- <ctl name="VA_CDC_DMA_TX_0 Channels" value="Two" />
- <ctl name="VA_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="VA_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="VA DEC0 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC1 MUX" value="MSM_DMIC" />
- <ctl name="VA DMIC MUX0" value="DMIC4" />
- <ctl name="VA DMIC MUX1" value="DMIC0" />
- </path>
-
- <path name="listen-ape-handset-tmic">
- <ctl name="VA_CDC_DMA_TX_0 Channels" value="Three" />
- <ctl name="VA_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="VA_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="VA_AIF1_CAP Mixer DEC2" value="1" />
- <ctl name="VA DEC0 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC1 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC2 MUX" value="MSM_DMIC" />
- <ctl name="VA DMIC MUX0" value="DMIC4" />
- <ctl name="VA DMIC MUX1" value="DMIC0" />
- <ctl name="VA DMIC MUX2" value="DMIC1" />
- </path>
-
- <path name="listen-ape-handset-qmic">
- <ctl name="VA_CDC_DMA_TX_0 Channels" value="Four" />
- <ctl name="VA_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="VA_AIF1_CAP Mixer DEC1" value="1" />
- <ctl name="VA_AIF1_CAP Mixer DEC2" value="1" />
- <ctl name="VA_AIF1_CAP Mixer DEC3" value="1" />
- <ctl name="VA DEC0 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC1 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC2 MUX" value="MSM_DMIC" />
- <ctl name="VA DEC3 MUX" value="MSM_DMIC" />
- <ctl name="VA DMIC MUX0" value="DMIC4" />
- <ctl name="VA DMIC MUX1" value="DMIC0" />
- <ctl name="VA DMIC MUX2" value="DMIC1" />
- <ctl name="VA DMIC MUX3" value="DMIC2" />
- </path>
-
- <path name="listen-ape-headset-mic">
- <ctl name="VA_AIF1_CAP Mixer DEC0" value="1" />
- <ctl name="VA DEC0 MUX" value="SWR_MIC" />
- <ctl name="VA SMIC MUX0" value="ADC1" />
- <ctl name="ADC2 Volume" value="62" />
- <ctl name="ADC2_MIXER Switch" value="1" />
- <ctl name="ADC2 MUX" value="INP2" />
- </path>
-
- <path name="echo-reference">
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="WSA_CDC_DMA_RX_0"/>
- <ctl name="EC Reference Channels" value="Two"/>
- <ctl name="EC Reference Bit Format" value="S16_LE"/>
- <ctl name="EC Reference SampleRate" value="48000"/>
- </path>
-
- <path name="echo-reference headset">
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="WSA_CDC_DMA_RX_0"/>
- <ctl name="EC Reference Channels" value="One"/>
- <ctl name="EC Reference Bit Format" value="S16_LE"/>
- <ctl name="EC Reference SampleRate" value="48000"/>
- </path>
-
- <path name="echo-reference a2dp">
- <ctl name="AUDIO_REF_EC_UL1 MUX" value="SLIM_7_RX"/>
- <ctl name="EC Reference Channels" value="Two"/>
- <ctl name="EC Reference Bit Format" value="S16_LE"/>
- <ctl name="EC Reference SampleRate" value="48000"/>
- </path>
-
-</mixer>
diff --git a/audio/sound_trigger_platform_info.xml b/audio/sound_trigger_platform_info.xml
deleted file mode 100644
index 4f1aa6f..0000000
--- a/audio/sound_trigger_platform_info.xml
+++ /dev/null
@@ -1,318 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!--- Copyright (c) 2013-2019, The Linux Foundation. All rights reserved. -->
-<!--- -->
-<!--- Redistribution and use in source and binary forms, with or without -->
-<!--- modification, are permitted provided that the following conditions are -->
-<!--- met: -->
-<!--- * Redistributions of source code must retain the above copyright -->
-<!--- notice, this list of conditions and the following disclaimer. -->
-<!--- * Redistributions in binary form must reproduce the above -->
-<!--- copyright notice, this list of conditions and the following -->
-<!--- disclaimer in the documentation and/or other materials provided -->
-<!--- with the distribution. -->
-<!--- * Neither the name of The Linux Foundation nor the names of its -->
-<!--- contributors may be used to endorse or promote products derived -->
-<!--- from this software without specific prior written permission. -->
-<!--- -->
-<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
-<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
-<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
-<!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
-<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
-<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
-<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
-<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
-<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -->
-<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
-<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
-<sound_trigger_platform_info>
- <param version="0x0105" /> <!-- this must be the first param -->
-<!--- Version History: -->
-<!--- 0x0101: Legacy version. -->
-<!--- 0x0102: Includes acdb_ids param with the gcs_usecase tag. This matches -->
-<!--- the gcs_usecase with the acdb device that uses it. -->
-<!--- 0x0103: app_type and in_channels added to <lsm usecase> and out_channels -->
-<!--- added to <adm_config> -->
-<!--- 0x0104: instance id support for both WDSP<CPE> and ADSP lsm usecases -->
-<!--- 0x0105: Select <lsm_usecase> based on capture device -->
-
- <common_config>
- <param max_ape_sessions="8" />
- <param enable_failure_detection="false" />
- <param support_device_switch="false" />
- <param transit_to_non_lpi_on_battery_charging="false" />
- <!-- Below backend params must match with port used in mixer path file -->
- <!-- param used to configure backend sample rate, format and channels -->
- <param backend_port_name="VA_CDC_DMA_TX_0" />
- <!-- Param used to match and obtain device backend index -->
- <param backend_dai_name="VA_CDC_DMA_TX_0" />
- <!-- Param used to indicate if SVA has dedicated SLIM ports -->
- <param dedicated_sva_path="true" />
- <param platform_lpi_enable="true" />
- </common_config>
- <acdb_ids>
- <param DEVICE_HANDSET_MIC_APE="100" />
- <param DEVICE_HANDSET_MIC_PP_APE="135" />
- <param DEVICE_HANDSET_DMIC_APE="149" />
- <param DEVICE_HANDSET_DMIC_LPI_APE="179" />
- <param DEVICE_HANDSET_TMIC_APE="157" />
- <param DEVICE_HANDSET_TMIC_LPI_APE="180" />
- <param DEVICE_HANDSET_QMIC_APE="137" />
- <param DEVICE_HANDSET_QMIC_LPI_APE="181" />
- <param DEVICE_HEADSET_MIC_APE="141" />
- <param DEVICE_HEADSET_MIC_APE_LPI="182" />
- </acdb_ids>
-
- <!-- Multiple sound_model_config tags can be listed, each with unique -->
- <!-- vendor_uuid. The below tag represents QTI SVA engine sound model -->
- <!-- configuration. ISV must use their own unique vendor_uuid. -->
-
- <!-- QTI SVA -->
- <sound_model_config>
- <param vendor_uuid="68ab2d40-e860-11e3-95ef-0002a5d5c51b" />
- <param execution_type="ADSP" />
- <param library="libsmwrapper.so" />
- <param max_ape_phrases="20" />
- <param max_ape_users="10" />
- <!-- Profile specific data which the algorithm can support -->
- <param sample_rate="16000" />
- <param bit_width="16" />
- <param out_channels="1"/> <!-- Module output channels -->
-
- <arm_ss_usecase>
- <!-- Options are "KEYWORD_DETECTION", "USER_VERIFICATION", "CUSTOM_DETECTION" -->
- <param sm_detection_type= "KEYWORD_DETECTION" />
- <param sm_id="0x2" />
- <param module_lib="libcapiv2svacnn.so"/>
- <param sample_rate="16000"/>
- <param bit_wdith="16"/>
- <param channel_count="1"/>
- </arm_ss_usecase>
- <arm_ss_usecase>
- <param sm_detection_type= "USER_VERIFICATION" />
- <param sm_id="0x4" />
- <param module_lib="libcapiv2vop.so"/>
- <param sample_rate="16000"/>
- <param bit_wdith="16"/>
- <param channel_count="1"/>
- </arm_ss_usecase>
- <!-- Module and param ids with which the algorithm is integrated
- in non-graphite firmware (note these must come after gcs params)
- Extends flexibility to have different ids based on execution type.
- valid execution_type values: "WDSP" "ADSP" -->
- <lsm_usecase>
- <param capture_device="HANDSET" />
- <!-- adm_cfg_profile should match with the one defined under adm_config -->
- <!-- Set it to NONE if LSM directly connects to AFE -->
- <param adm_cfg_profile="FFECNS" />
- <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC" -->
- <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile -->
- <!-- is FFECNS -->
- <param fluence_type="FLUENCE_TMIC" />
- <param execution_mode="ADSP" />
- <param app_type="2" /> <!-- app type used in ACDB -->
- <param in_channels="5"/> <!-- Module input channels -->
- <param in_channels_lpi="3"/>
- <param load_sound_model_ids="0x00012C1C, 0x0, 0x00012C14" />
- <param unload_sound_model_ids="0x00012C1C, 0x0, 0x00012C15" />
- <param confidence_levels_ids="0x00012C1C, 0x0, 0x00012C07" />
- <param operation_mode_ids="0x00012C1C, 0x0, 0x00012C02" />
- <param polling_enable_ids="0x00012C1C, 0x0, 0x00012C1B" />
- <param custom_config_ids="0x00012C1C, 0x0, 0x00012C20" />
- <param det_event_type_ids="0x00012C1C, 0x0, 0x00012C2C" />
- </lsm_usecase>
- <lsm_usecase>
- <param capture_device="HEADSET" />
- <param adm_cfg_profile="FFECNS" />
- <param fluence_type="FLUENCE_MIC" />
- <param execution_mode="ADSP" />
- <param app_type="2" /> <!-- app type used in ACDB -->
- <param in_channels="1"/> <!-- Module input channels -->
- <param load_sound_model_ids="0x00012C1C, 0x0, 0x00012C14" />
- <param unload_sound_model_ids="0x00012C1C, 0x0, 0x00012C15" />
- <param confidence_levels_ids="0x00012C1C, 0x0, 0x00012C07" />
- <param operation_mode_ids="0x00012C1C, 0x0, 0x00012C02" />
- <param polling_enable_ids="0x00012C1C, 0x0, 0x00012C1B" />
- <param custom_config_ids="0x00012C1C, 0x0, 0x00012C20" />
- <param det_event_type_ids="0x00012C1C, 0x0, 0x00012C2C" />
- </lsm_usecase>
-
- <!-- format: "ADPCM_packet" or "PCM_packet" !-->
- <!-- transfer_mode: "FTRT" or "RT" -->
- <!-- kw_duration is in milli seconds. It is valid only for FTRT
- transfer mode -->
- <param capture_keyword="PCM_packet, RT, 2000" />
- <param client_capture_read_delay="2000" />
- </sound_model_config>
-
- <!-- QTI Music Detection !-->
- <sound_model_config>
- <param vendor_uuid="876c1b46-9d4d-40cc-a4fd-4d5ec7a80e47" />
- <param execution_type="ADSP" />
- <param library="libsmwrapper.so" />
- <param max_ape_phrases="1" />
- <param max_ape_users="1" />
- <!-- Profile specific data which the algorithm can support -->
- <param sample_rate="16000" />
- <param bit_width="16" />
- <param out_channels="1"/> <!-- Module output channels -->
- <!-- Module and param ids with which the algorithm is integrated
- in non-graphite firmware (note these must come after gcs params)
- Extends flexibility to have different ids based on execution type.
- valid execution_type values: only "ADSP" -->
- <lsm_usecase>
- <param capture_device="HANDSET" />
- <!-- adm_cfg_profile should match with the one defined under adm_config -->
- <!-- Set it to NONE if LSM directly connects to AFE -->
- <param adm_cfg_profile="NONE" />
- <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC" -->
- <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile -->
- <!-- is FFECNS -->
- <param fluence_type="NONE" />
- <param execution_mode="ADSP" />
- <param app_type="4" /> <!-- app type for MD used in ACDB -->
- <param in_channels="1"/> <!-- Module input channels -->
- <param load_sound_model_ids="0x00012C22, 0x0, 0x00012C14" />
- <param unload_sound_model_ids="0x00012C22, 0x0, 0x00012C15" />
- <param confidence_levels_ids="0x00012C22, 0x0, 0x00012C07" />
- <param det_event_type_ids="0x00012C22, 0x0, 0x00012C2C" />
- <param custom_config_ids="0x00012C22, 0x0, 0x00012C30" />
- </lsm_usecase>
- <lsm_usecase>
- <param capture_device="HEADSET" />
- <param adm_cfg_profile="NONE" />
- <param fluence_type="NONE" />
- <param execution_mode="ADSP" />
- <param app_type="4" /> <!-- app type for MD used in ACDB -->
- <param in_channels="1"/> <!-- Module input channels -->
- <param load_sound_model_ids="0x00012C22, 0x0, 0x00012C14" />
- <param unload_sound_model_ids="0x00012C22, 0x0, 0x00012C15" />
- <param confidence_levels_ids="0x00012C22, 0x0, 0x00012C07" />
- <param det_event_type_ids="0x00012C22, 0x0, 0x00012C2C" />
- <param custom_config_ids="0x00012C22, 0x0, 0x00012C30" />
- </lsm_usecase>
-
- <!-- format: "ADPCM_packet" or "PCM_packet" !-->
- <!-- transfer_mode: "FTRT" or "RT" -->
- <!-- kw_duration is in milli seconds. It is valid only for FTRT
- transfer mode -->
- <param capture_keyword="PCM_packet, FTRT, 1500" />
- <param client_capture_read_delay="2000" />
- </sound_model_config>
-
- <!-- Google Hotword -->
- <sound_model_config>
- <param vendor_uuid="7038ddc8-30f2-11e6-b0ac-40a8f03d3f15" />
- <param execution_type="ADSP" />
- <param library="none" />
- <param max_ape_phrases="1" />
- <param max_ape_users="1" />
- <!-- Profile specific data which the algorithm can support -->
- <param sample_rate="16000" />
- <param bit_width="16" />
- <param out_channels="1"/> <!-- Module output channels -->
- <lsm_usecase>
- <param capture_device="HANDSET" />
- <!-- adm_cfg_profile should match with the one defined under adm_config -->
- <!-- Set it to NONE if LSM directly connects to AFE -->
- <param adm_cfg_profile="NONE" />
- <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC" -->
- <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile -->
- <!-- is FFECNS -->
- <param fluence_type="NONE" />
- <param execution_mode="ADSP" />
- <param app_type="3" /> <!-- app type used in ACDB -->
- <param in_channels="1"/> <!-- Module input channels -->
- <param load_sound_model_ids="0x18000001, 0x0, 0x00012C14" />
- <param unload_sound_model_ids="0x18000001, 0x0, 0x00012C15" />
- <param confidence_levels_ids="0x18000001, 0x0, 0x00012C07" />
- <param operation_mode_ids="0x18000001, 0x0, 0x00012C02" />
- <param polling_enable_ids="0x18000001, 0x0, 0x00012C1B" />
- <param custom_config_ids="0x18000001, 0x0, 0x00012C20" />
- </lsm_usecase>
- <lsm_usecase>
- <param capture_device="HEADSET" />
- <param adm_cfg_profile="NONE" />
- <param fluence_type="NONE" />
- <param execution_mode="ADSP" />
- <param app_type="3" /> <!-- app type used in ACDB -->
- <param in_channels="1"/> <!-- Module input channels -->
- <param load_sound_model_ids="0x18000001, 0x0, 0x00012C14" />
- <param unload_sound_model_ids="0x18000001, 0x0, 0x00012C15" />
- <param confidence_levels_ids="0x18000001, 0x0, 0x00012C07" />
- <param operation_mode_ids="0x18000001, 0x0, 0x00012C02" />
- <param polling_enable_ids="0x18000001, 0x0, 0x00012C1B" />
- <param custom_config_ids="0x18000001, 0x0, 0x00012C20" />
- </lsm_usecase>
-
- <!-- format: "ADPCM_packet" or "PCM_packet" !-->
- <!-- transfer_mode: "FTRT" or "RT" -->
- <!-- kw_duration is in milli seconds. It is valid only for FTRT
- transfer mode -->
- <param capture_keyword="PCM_raw, FTRT, 2000" />
- <param client_capture_read_delay="2000" />
- </sound_model_config>
-
- <!-- Google Music Detection -->
- <sound_model_config>
- <param vendor_uuid="9f6ad62a-1f0b-11e7-87c5-40a8f03d3f15" />
- <param execution_type="ADSP" />
- <param library="none" />
- <param max_ape_phrases="1" />
- <param max_ape_users="1" />
- <!-- Profile specific data which the algorithm can support -->
- <param sample_rate="16000" />
- <param bit_width="16" />
- <param out_channels="1"/> <!-- Module output channels -->
- <lsm_usecase>
- <param capture_device="HANDSET" />
- <!-- adm_cfg_profile should match with the one defined under adm_config -->
- <!-- Set it to NONE if LSM directly connects to AFE -->
- <param adm_cfg_profile="NONE" />
- <!-- fluence_type: "FLUENCE_MIC", "FLUENCE_DMIC", "FLUENCE_TMIC" -->
- <!-- "FLUENCE_QMIC". Param value is valid when adm_cfg_profile -->
- <!-- is FFECNS -->
- <param fluence_type="NONE" />
- <param execution_mode="ADSP" />
- <param app_type="3" /> <!-- app type used in ACDB -->
- <param in_channels="1"/> <!-- Module input channels -->
- <param load_sound_model_ids="0x18000001, 0x0, 0x00012C14" />
- <param unload_sound_model_ids="0x18000001, 0x0, 0x00012C15" />
- <param confidence_levels_ids="0x18000001, 0x0, 0x00012C07" />
- <param operation_mode_ids="0x18000001, 0x0, 0x00012C02" />
- <param polling_enable_ids="0x18000001, 0x0, 0x00012C1B" />
- <param custom_config_ids="0x18000001, 0x0, 0x00012C20" />
- </lsm_usecase>
- <lsm_usecase>
- <param capture_device="HEADSET" />
- <param adm_cfg_profile="NONE" />
- <param fluence_type="NONE" />
- <param execution_mode="ADSP" />
- <param app_type="3" /> <!-- app type used in ACDB -->
- <param in_channels="1"/> <!-- Module input channels -->
- <param load_sound_model_ids="0x18000001, 0x0, 0x00012C14" />
- <param unload_sound_model_ids="0x18000001, 0x0, 0x00012C15" />
- <param confidence_levels_ids="0x18000001, 0x0, 0x00012C07" />
- <param operation_mode_ids="0x18000001, 0x0, 0x00012C02" />
- <param polling_enable_ids="0x18000001, 0x0, 0x00012C1B" />
- <param custom_config_ids="0x18000001, 0x0, 0x00012C20" />
- </lsm_usecase>
-
- <!-- format: "ADPCM_packet" or "PCM_packet" !-->
- <!-- transfer_mode: "FTRT" or "RT" -->
- <!-- kw_duration is in milli seconds. It is valid only for FTRT
- transfer mode -->
- <param capture_keyword="PCM_raw, FTRT, 5000" />
- <param client_capture_read_delay="2000" />
- </sound_model_config>
-
- <!-- Multiple adm_config tags can be listed, each with unique profile name. -->
- <!-- app_type to match corresponding value from ACDB -->
- <adm_config>
- <param adm_cfg_profile="FFECNS" />
- <param app_type="69947" />
- <param sample_rate="16000" />
- <param bit_width="16" />
- <param out_channels="5"/>
- </adm_config>
-</sound_trigger_platform_info>
diff --git a/audio_policy_configuration.xml b/audio_policy_configuration.xml
deleted file mode 100644
index be77238..0000000
--- a/audio_policy_configuration.xml
+++ /dev/null
@@ -1,245 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<!-- Copyright (C) 2018 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
- <globalConfiguration speaker_drc_enabled="true"/>
-
- <modules>
- <module name="primary" halVersion="2.0">
- <attachedDevices>
- <item>Speaker</item>
- <item>Speaker Safe</item>
- <item>Earpiece</item>
- <item>Telephony Tx</item>
- <item>Built-In Mic</item>
- <item>Built-In Back Mic</item>
- <item>Telephony Rx</item>
- </attachedDevices>
- <defaultOutputDevice>Speaker</defaultOutputDevice>
- <mixPorts>
- <mixPort name="primary output" role="source" flags="AUDIO_OUTPUT_FLAG_PRIMARY|AUDIO_OUTPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="raw" role="source" flags="AUDIO_OUTPUT_FLAG_RAW|AUDIO_OUTPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="hifi_playback" role="source" />
- <mixPort name="deep_buffer" role="source"
- flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
- <profile name="" format="AUDIO_FORMAT_PCM_24_BIT_PACKED"
- samplingRates="44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="compressed_offload" role="source"
- flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
- <profile name="" format="AUDIO_FORMAT_MP3"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_LC"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- </mixPort>
- <mixPort name="voice_tx" role="source">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="mmap_no_irq_out" role="source" flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_MMAP_NOIRQ">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="voip_rx" role="source"
- flags="AUDIO_OUTPUT_FLAG_VOIP_RX">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="incall_music_uplink" role="source"
- flags="AUDIO_OUTPUT_FLAG_INCALL_MUSIC">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="primary input" role="sink" maxActiveCount="0">
- <profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="fast input" role="sink" flags="AUDIO_INPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="hifi_input" role="sink" />
- <mixPort name="voice_rx" role="sink">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
- </mixPort>
- <mixPort name="mmap_no_irq_in" role="sink" flags="AUDIO_INPUT_FLAG_MMAP_NOIRQ">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="voip_tx" role="sink"
- flags="AUDIO_INPUT_FLAG_VOIP_TX">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
- </mixPort>
- </mixPorts>
- <devicePorts>
- <devicePort tagName="Earpiece" type="AUDIO_DEVICE_OUT_EARPIECE" role="sink">
- </devicePort>
- <devicePort tagName="Speaker" type="AUDIO_DEVICE_OUT_SPEAKER" role="sink">
- </devicePort>
- <devicePort tagName="Speaker Safe" type="AUDIO_DEVICE_OUT_SPEAKER_SAFE" role="sink">
- </devicePort>
- <devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="Wired Headphones" type="AUDIO_DEVICE_OUT_WIRED_HEADPHONE" role="sink">
- </devicePort>
- <devicePort tagName="Line Out" type="AUDIO_DEVICE_OUT_LINE" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
- </devicePort>
- <devicePort tagName="Telephony Tx" type="AUDIO_DEVICE_OUT_TELEPHONY_TX" role="sink">
- </devicePort>
- <devicePort tagName="USB Device Out" type="AUDIO_DEVICE_OUT_USB_DEVICE" role="sink">
- </devicePort>
- <devicePort tagName="USB Headset Out" type="AUDIO_DEVICE_OUT_USB_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="BT A2DP Out" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP" role="sink"
- encodedFormats="AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_AAC AUDIO_FORMAT_SBC">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100,48000,88200,96000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </devicePort>
- <devicePort tagName="BT A2DP Headphones" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES" role="sink"
- encodedFormats="AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_AAC AUDIO_FORMAT_SBC">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100,48000,88200,96000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </devicePort>
- <devicePort tagName="BT A2DP Speaker" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER" role="sink"
- encodedFormats="AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_AAC AUDIO_FORMAT_SBC">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100,48000,88200,96000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </devicePort>
- <devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
- </devicePort>
- <devicePort tagName="Built-In Back Mic" type="AUDIO_DEVICE_IN_BACK_MIC" role="source">
- </devicePort>
- <devicePort tagName="Wired Headset Mic" type="AUDIO_DEVICE_IN_WIRED_HEADSET" role="source">
- </devicePort>
- <devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
- </devicePort>
- <devicePort tagName="Telephony Rx" type="AUDIO_DEVICE_IN_TELEPHONY_RX" role="source">
- </devicePort>
- <!-- TODO: Enable multi-channel recording -->
- <devicePort tagName="USB Device In" type="AUDIO_DEVICE_IN_USB_DEVICE" role="source">
- </devicePort>
- <devicePort tagName="USB Headset In" type="AUDIO_DEVICE_IN_USB_HEADSET" role="source">
- </devicePort>
- </devicePorts>
- <routes>
- <route type="mix" sink="Earpiece"
- sources="primary output,raw,deep_buffer,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Speaker"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Speaker Safe"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Wired Headset"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Wired Headphones"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Line Out"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="BT SCO"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="BT SCO Headset"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="BT SCO Car Kit"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="USB Device Out"
- sources="primary output,raw,deep_buffer,compressed_offload,hifi_playback,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="USB Headset Out"
- sources="primary output,raw,deep_buffer,compressed_offload,hifi_playback,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Telephony Tx"
- sources="voice_tx,incall_music_uplink"/>
- <route type="mix" sink="primary input"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="fast input"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="voice_rx"
- sources="Telephony Rx"/>
- <route type="mix" sink="hifi_input" sources="USB Device In,USB Headset In" />
- <route type="mix" sink="mmap_no_irq_in"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="voip_tx"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="BT A2DP Out"
- sources="primary output,deep_buffer,compressed_offload"/>
- <route type="mix" sink="BT A2DP Headphones"
- sources="primary output,deep_buffer,compressed_offload"/>
- <route type="mix" sink="BT A2DP Speaker"
- sources="primary output,deep_buffer,compressed_offload"/>
- </routes>
- </module>
-
- <!-- A2DP Input Audio HAL -->
- <xi:include href="a2dp_in_audio_policy_configuration.xml"/>
-
- <!-- Usb Audio HAL -->
- <module name="usb" halVersion="2.0">
- <mixPorts>
- <mixPort name="usb_accessory output" role="source">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- </mixPorts>
- <devicePorts>
- <devicePort tagName="USB Host Out" type="AUDIO_DEVICE_OUT_USB_ACCESSORY" role="sink">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </devicePort>
- </devicePorts>
- <routes>
- <route type="mix" sink="USB Host Out"
- sources="usb_accessory output"/>
- </routes>
- </module>
-
- <!-- Remote Submix Audio HAL -->
- <xi:include href="r_submix_audio_policy_configuration.xml"/>
-
- <!-- Bluetooth Audio HAL for Hearing aid -->
- <xi:include href="bluetooth_hearing_aid_audio_policy_configuration.xml"/>
-
- </modules>
-
- <!-- Volume section -->
-
- <xi:include href="audio_policy_volumes.xml"/>
- <xi:include href="default_volume_tables.xml"/>
-
-</audioPolicyConfiguration>
diff --git a/audio_policy_configuration_a2dp_offload_disabled.xml b/audio_policy_configuration_a2dp_offload_disabled.xml
deleted file mode 100644
index dcbcd55..0000000
--- a/audio_policy_configuration_a2dp_offload_disabled.xml
+++ /dev/null
@@ -1,224 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<!-- Copyright (C) 2018 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
- <globalConfiguration speaker_drc_enabled="true"/>
-
- <modules>
- <module name="primary" halVersion="2.0">
- <attachedDevices>
- <item>Speaker</item>
- <item>Speaker Safe</item>
- <item>Earpiece</item>
- <item>Telephony Tx</item>
- <item>Built-In Mic</item>
- <item>Built-In Back Mic</item>
- <item>Telephony Rx</item>
- </attachedDevices>
- <defaultOutputDevice>Speaker</defaultOutputDevice>
- <mixPorts>
- <mixPort name="primary output" role="source" flags="AUDIO_OUTPUT_FLAG_PRIMARY|AUDIO_OUTPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="raw" role="source" flags="AUDIO_OUTPUT_FLAG_RAW|AUDIO_OUTPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="hifi_playback" role="source" />
- <mixPort name="deep_buffer" role="source"
- flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
- <profile name="" format="AUDIO_FORMAT_PCM_24_BIT_PACKED"
- samplingRates="44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="compressed_offload" role="source"
- flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
- <profile name="" format="AUDIO_FORMAT_MP3"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_LC"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- </mixPort>
- <mixPort name="voice_tx" role="source">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="mmap_no_irq_out" role="source" flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_MMAP_NOIRQ">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="voip_rx" role="source"
- flags="AUDIO_OUTPUT_FLAG_VOIP_RX">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="incall_music_uplink" role="source"
- flags="AUDIO_OUTPUT_FLAG_INCALL_MUSIC">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="primary input" role="sink">
- <profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="fast input" role="sink" flags="AUDIO_INPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="hifi_input" role="sink" />
- <mixPort name="voice_rx" role="sink">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
- </mixPort>
- <mixPort name="mmap_no_irq_in" role="sink" flags="AUDIO_INPUT_FLAG_MMAP_NOIRQ">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="voip_tx" role="sink"
- flags="AUDIO_INPUT_FLAG_VOIP_TX">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
- </mixPort>
- </mixPorts>
- <devicePorts>
- <devicePort tagName="Earpiece" type="AUDIO_DEVICE_OUT_EARPIECE" role="sink">
- </devicePort>
- <devicePort tagName="Speaker" type="AUDIO_DEVICE_OUT_SPEAKER" role="sink">
- </devicePort>
- <devicePort tagName="Speaker Safe" type="AUDIO_DEVICE_OUT_SPEAKER_SAFE" role="sink">
- </devicePort>
- <devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="Wired Headphones" type="AUDIO_DEVICE_OUT_WIRED_HEADPHONE" role="sink">
- </devicePort>
- <devicePort tagName="Line Out" type="AUDIO_DEVICE_OUT_LINE" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
- </devicePort>
- <devicePort tagName="Telephony Tx" type="AUDIO_DEVICE_OUT_TELEPHONY_TX" role="sink">
- </devicePort>
- <devicePort tagName="USB Device Out" type="AUDIO_DEVICE_OUT_USB_DEVICE" role="sink">
- </devicePort>
- <devicePort tagName="USB Headset Out" type="AUDIO_DEVICE_OUT_USB_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
- </devicePort>
- <devicePort tagName="Built-In Back Mic" type="AUDIO_DEVICE_IN_BACK_MIC" role="source">
- </devicePort>
- <devicePort tagName="Wired Headset Mic" type="AUDIO_DEVICE_IN_WIRED_HEADSET" role="source">
- </devicePort>
- <devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
- </devicePort>
- <devicePort tagName="Telephony Rx" type="AUDIO_DEVICE_IN_TELEPHONY_RX" role="source">
- </devicePort>
- <!-- TODO: Enable multi-channel recording -->
- <devicePort tagName="USB Device In" type="AUDIO_DEVICE_IN_USB_DEVICE" role="source">
- </devicePort>
- <devicePort tagName="USB Headset In" type="AUDIO_DEVICE_IN_USB_HEADSET" role="source">
- </devicePort>
- </devicePorts>
- <routes>
- <route type="mix" sink="Earpiece"
- sources="primary output,raw,deep_buffer,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Speaker"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Speaker Safe"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Wired Headset"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Wired Headphones"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Line Out"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="BT SCO"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="BT SCO Headset"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="BT SCO Car Kit"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="USB Device Out"
- sources="primary output,raw,deep_buffer,compressed_offload,hifi_playback,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="USB Headset Out"
- sources="primary output,raw,deep_buffer,compressed_offload,hifi_playback,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Telephony Tx"
- sources="voice_tx,incall_music_uplink"/>
- <route type="mix" sink="primary input"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="fast input"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="voice_rx"
- sources="Telephony Rx"/>
- <route type="mix" sink="hifi_input" sources="USB Device In,USB Headset In" />
- <route type="mix" sink="mmap_no_irq_in"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="voip_tx"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- </routes>
- </module>
-
- <!-- A2DP Input Audio HAL -->
- <xi:include href="a2dp_in_audio_policy_configuration.xml"/>
-
- <!-- Usb Audio HAL -->
- <module name="usb" halVersion="2.0">
- <mixPorts>
- <mixPort name="usb_accessory output" role="source">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- </mixPorts>
- <devicePorts>
- <devicePort tagName="USB Host Out" type="AUDIO_DEVICE_OUT_USB_ACCESSORY" role="sink">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </devicePort>
- </devicePorts>
- <routes>
- <route type="mix" sink="USB Host Out"
- sources="usb_accessory output"/>
- </routes>
- </module>
-
- <!-- Remote Submix Audio HAL -->
- <xi:include href="r_submix_audio_policy_configuration.xml"/>
-
- <!-- Bluetooth Audio HAL -->
- <xi:include href="bluetooth_audio_policy_configuration.xml"/>
-
- </modules>
-
- <!-- Volume section -->
-
- <xi:include href="audio_policy_volumes.xml"/>
- <xi:include href="default_volume_tables.xml"/>
-
-</audioPolicyConfiguration>
diff --git a/audio_policy_configuration_bluetooth_legacy_hal.xml b/audio_policy_configuration_bluetooth_legacy_hal.xml
deleted file mode 100644
index cf68c9b..0000000
--- a/audio_policy_configuration_bluetooth_legacy_hal.xml
+++ /dev/null
@@ -1,224 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<!-- Copyright (C) 2018 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
- <globalConfiguration speaker_drc_enabled="true"/>
-
- <modules>
- <module name="primary" halVersion="2.0">
- <attachedDevices>
- <item>Speaker</item>
- <item>Speaker Safe</item>
- <item>Earpiece</item>
- <item>Telephony Tx</item>
- <item>Built-In Mic</item>
- <item>Built-In Back Mic</item>
- <item>Telephony Rx</item>
- </attachedDevices>
- <defaultOutputDevice>Speaker</defaultOutputDevice>
- <mixPorts>
- <mixPort name="primary output" role="source" flags="AUDIO_OUTPUT_FLAG_PRIMARY|AUDIO_OUTPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="raw" role="source" flags="AUDIO_OUTPUT_FLAG_RAW|AUDIO_OUTPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="hifi_playback" role="source" />
- <mixPort name="deep_buffer" role="source"
- flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
- <profile name="" format="AUDIO_FORMAT_PCM_24_BIT_PACKED"
- samplingRates="44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="compressed_offload" role="source"
- flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
- <profile name="" format="AUDIO_FORMAT_MP3"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_LC"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
- </mixPort>
- <mixPort name="voice_tx" role="source">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="mmap_no_irq_out" role="source" flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_MMAP_NOIRQ">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="voip_rx" role="source"
- flags="AUDIO_OUTPUT_FLAG_VOIP_RX">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="incall_music_uplink" role="source"
- flags="AUDIO_OUTPUT_FLAG_INCALL_MUSIC">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- <mixPort name="primary input" role="sink">
- <profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="fast input" role="sink" flags="AUDIO_INPUT_FLAG_FAST">
- <profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="hifi_input" role="sink" />
- <mixPort name="voice_rx" role="sink">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
- </mixPort>
- <mixPort name="mmap_no_irq_in" role="sink" flags="AUDIO_INPUT_FLAG_MMAP_NOIRQ">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
- channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
- </mixPort>
- <mixPort name="voip_tx" role="sink"
- flags="AUDIO_INPUT_FLAG_VOIP_TX">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
- </mixPort>
- </mixPorts>
- <devicePorts>
- <devicePort tagName="Earpiece" type="AUDIO_DEVICE_OUT_EARPIECE" role="sink">
- </devicePort>
- <devicePort tagName="Speaker" type="AUDIO_DEVICE_OUT_SPEAKER" role="sink">
- </devicePort>
- <devicePort tagName="Speaker Safe" type="AUDIO_DEVICE_OUT_SPEAKER_SAFE" role="sink">
- </devicePort>
- <devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="Wired Headphones" type="AUDIO_DEVICE_OUT_WIRED_HEADPHONE" role="sink">
- </devicePort>
- <devicePort tagName="Line Out" type="AUDIO_DEVICE_OUT_LINE" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
- </devicePort>
- <devicePort tagName="Telephony Tx" type="AUDIO_DEVICE_OUT_TELEPHONY_TX" role="sink">
- </devicePort>
- <devicePort tagName="USB Device Out" type="AUDIO_DEVICE_OUT_USB_DEVICE" role="sink">
- </devicePort>
- <devicePort tagName="USB Headset Out" type="AUDIO_DEVICE_OUT_USB_HEADSET" role="sink">
- </devicePort>
- <devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
- </devicePort>
- <devicePort tagName="Built-In Back Mic" type="AUDIO_DEVICE_IN_BACK_MIC" role="source">
- </devicePort>
- <devicePort tagName="Wired Headset Mic" type="AUDIO_DEVICE_IN_WIRED_HEADSET" role="source">
- </devicePort>
- <devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
- </devicePort>
- <devicePort tagName="Telephony Rx" type="AUDIO_DEVICE_IN_TELEPHONY_RX" role="source">
- </devicePort>
- <!-- TODO: Enable multi-channel recording -->
- <devicePort tagName="USB Device In" type="AUDIO_DEVICE_IN_USB_DEVICE" role="source">
- </devicePort>
- <devicePort tagName="USB Headset In" type="AUDIO_DEVICE_IN_USB_HEADSET" role="source">
- </devicePort>
- </devicePorts>
- <routes>
- <route type="mix" sink="Earpiece"
- sources="primary output,raw,deep_buffer,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Speaker"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Speaker Safe"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Wired Headset"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Wired Headphones"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Line Out"
- sources="primary output,raw,deep_buffer,compressed_offload,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="BT SCO"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="BT SCO Headset"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="BT SCO Car Kit"
- sources="primary output,raw,deep_buffer,voip_rx"/>
- <route type="mix" sink="USB Device Out"
- sources="primary output,raw,deep_buffer,compressed_offload,hifi_playback,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="USB Headset Out"
- sources="primary output,raw,deep_buffer,compressed_offload,hifi_playback,mmap_no_irq_out,voip_rx"/>
- <route type="mix" sink="Telephony Tx"
- sources="voice_tx,incall_music_uplink"/>
- <route type="mix" sink="primary input"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="fast input"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="voice_rx"
- sources="Telephony Rx"/>
- <route type="mix" sink="hifi_input" sources="USB Device In,USB Headset In" />
- <route type="mix" sink="mmap_no_irq_in"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,USB Device In,USB Headset In"/>
- <route type="mix" sink="voip_tx"
- sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,USB Device In,USB Headset In"/>
- </routes>
- </module>
-
- <!-- A2DP Audio HAL -->
- <xi:include href="a2dp_audio_policy_configuration.xml"/>
-
- <!-- Usb Audio HAL -->
- <module name="usb" halVersion="2.0">
- <mixPorts>
- <mixPort name="usb_accessory output" role="source">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- </mixPorts>
- <devicePorts>
- <devicePort tagName="USB Host Out" type="AUDIO_DEVICE_OUT_USB_ACCESSORY" role="sink">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </devicePort>
- </devicePorts>
- <routes>
- <route type="mix" sink="USB Host Out"
- sources="usb_accessory output"/>
- </routes>
- </module>
-
- <!-- Remote Submix Audio HAL -->
- <xi:include href="r_submix_audio_policy_configuration.xml"/>
-
- <!-- Hearing aid Audio HAL -->
- <xi:include href="hearing_aid_audio_policy_configuration.xml"/>
-
- </modules>
-
- <!-- Volume section -->
-
- <xi:include href="audio_policy_volumes.xml"/>
- <xi:include href="default_volume_tables.xml"/>
-
-</audioPolicyConfiguration>
diff --git a/audio_policy_volumes.xml b/audio_policy_volumes.xml
deleted file mode 100644
index 635f721..0000000
--- a/audio_policy_volumes.xml
+++ /dev/null
@@ -1,213 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- Copyright (C) 2015 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<!-- Volume section defines a volume curve for a given use case and device category.
-It contains a list of points of this curve expressing the attenuation in Millibels for a given
-volume index from 0 to 100.
-<volume stream=”AUDIO_STREAM_MUSIC” deviceCategory=””>
-<point>0,-9600</point>
-<point>100,0</point>
-</volume>
--->
-
-<volumes>
- <volume stream="AUDIO_STREAM_VOICE_CALL" deviceCategory="DEVICE_CATEGORY_HEADSET">
- <point>0,-4200</point>
- <point>33,-2800</point>
- <point>66,-1400</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_VOICE_CALL" deviceCategory="DEVICE_CATEGORY_SPEAKER">
- <point>0,-2400</point>
- <point>33,-1600</point>
- <point>66,-800</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_VOICE_CALL" deviceCategory="DEVICE_CATEGORY_EARPIECE">
- <point>0,-2400</point>
- <point>33,-1600</point>
- <point>66,-800</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_VOICE_CALL" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_VOICE_CALL" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_SYSTEM" deviceCategory="DEVICE_CATEGORY_HEADSET">
- <point>1,-3000</point>
- <point>33,-2600</point>
- <point>66,-2200</point>
- <point>100,-1800</point>
- </volume>
- <volume stream="AUDIO_STREAM_SYSTEM" deviceCategory="DEVICE_CATEGORY_SPEAKER"
- ref="DEFAULT_SYSTEM_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_SYSTEM" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="DEFAULT_SYSTEM_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_SYSTEM" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_DEVICE_CATEGORY_EXT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_SYSTEM" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_RING" deviceCategory="DEVICE_CATEGORY_HEADSET"
- ref="DEFAULT_DEVICE_CATEGORY_HEADSET_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_RING" deviceCategory="DEVICE_CATEGORY_SPEAKER">
- <point>1,-4880</point>
- <point>42,-2870</point>
- <point>88,-1140</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_RING" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="DEFAULT_DEVICE_CATEGORY_EARPIECE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_RING" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_DEVICE_CATEGORY_EXT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_RING" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_HEADSET"
- ref="DEFAULT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_SPEAKER">
- <point>1,-6000</point>
- <point>19,-4400</point>
- <point>71,-2000</point>
- <point>91,-900</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="DEFAULT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_MUSIC" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ALARM" deviceCategory="DEVICE_CATEGORY_HEADSET"
- ref="DEFAULT_NON_MUTABLE_HEADSET_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ALARM" deviceCategory="DEVICE_CATEGORY_SPEAKER">
- <point>0,-4880</point>
- <point>42,-2870</point>
- <point>88,-1140</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_ALARM" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="DEFAULT_NON_MUTABLE_EARPIECE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ALARM" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_NON_MUTABLE_EXT_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ALARM" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_NON_MUTABLE_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_NOTIFICATION" deviceCategory="DEVICE_CATEGORY_HEADSET"
- ref="DEFAULT_DEVICE_CATEGORY_HEADSET_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_NOTIFICATION" deviceCategory="DEVICE_CATEGORY_SPEAKER">
- <point>1,-4880</point>
- <point>42,-2870</point>
- <point>88,-1140</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_NOTIFICATION" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="DEFAULT_DEVICE_CATEGORY_EARPIECE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_NOTIFICATION" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_DEVICE_CATEGORY_EXT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_NOTIFICATION" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_DEVICE_CATEGORY_HEADSET_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_BLUETOOTH_SCO" deviceCategory="DEVICE_CATEGORY_HEADSET">
- <point>0,-4200</point>
- <point>33,-2800</point>
- <point>66,-1400</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_BLUETOOTH_SCO" deviceCategory="DEVICE_CATEGORY_SPEAKER">
- <point>0,-2400</point>
- <point>33,-1600</point>
- <point>66,-800</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_BLUETOOTH_SCO" deviceCategory="DEVICE_CATEGORY_EARPIECE">
- <point>0,-4200</point>
- <point>33,-2800</point>
- <point>66,-1400</point>
- <point>100,0</point>
- </volume>
- <volume stream="AUDIO_STREAM_BLUETOOTH_SCO" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_BLUETOOTH_SCO" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ENFORCED_AUDIBLE" deviceCategory="DEVICE_CATEGORY_HEADSET">
- <point>1,-3000</point>
- <point>33,-2600</point>
- <point>66,-2200</point>
- <point>100,-1800</point>
- </volume>
- <volume stream="AUDIO_STREAM_ENFORCED_AUDIBLE" deviceCategory="DEVICE_CATEGORY_SPEAKER">
- <point>1,-3100</point>
- <point>71,-2100</point>
- <point>100,-1700</point>
- </volume>
- <volume stream="AUDIO_STREAM_ENFORCED_AUDIBLE" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="DEFAULT_SYSTEM_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ENFORCED_AUDIBLE" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_DEVICE_CATEGORY_EXT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ENFORCED_AUDIBLE" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_DTMF" deviceCategory="DEVICE_CATEGORY_HEADSET">
- <point>1,-3000</point>
- <point>33,-2600</point>
- <point>66,-2200</point>
- <point>100,-1800</point>
- </volume>
- <volume stream="AUDIO_STREAM_DTMF" deviceCategory="DEVICE_CATEGORY_SPEAKER"
- ref="DEFAULT_SYSTEM_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_DTMF" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="DEFAULT_SYSTEM_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_DTMF" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_DEVICE_CATEGORY_EXT_MEDIA_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_DTMF" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_TTS" deviceCategory="DEVICE_CATEGORY_HEADSET"
- ref="SILENT_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_TTS" deviceCategory="DEVICE_CATEGORY_SPEAKER"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_TTS" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="SILENT_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_TTS" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="SILENT_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_TTS" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="SILENT_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ACCESSIBILITY" deviceCategory="DEVICE_CATEGORY_HEADSET"
- ref="DEFAULT_NON_MUTABLE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ACCESSIBILITY" deviceCategory="DEVICE_CATEGORY_SPEAKER"
- ref="DEFAULT_NON_MUTABLE_SPEAKER_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ACCESSIBILITY" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="DEFAULT_NON_MUTABLE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ACCESSIBILITY" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="DEFAULT_NON_MUTABLE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_ACCESSIBILITY" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="DEFAULT_NON_MUTABLE_HEARING_AID_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_REROUTING" deviceCategory="DEVICE_CATEGORY_HEADSET"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_REROUTING" deviceCategory="DEVICE_CATEGORY_SPEAKER"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_REROUTING" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_REROUTING" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_REROUTING" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_PATCH" deviceCategory="DEVICE_CATEGORY_HEADSET"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_PATCH" deviceCategory="DEVICE_CATEGORY_SPEAKER"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_PATCH" deviceCategory="DEVICE_CATEGORY_EARPIECE"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_PATCH" deviceCategory="DEVICE_CATEGORY_EXT_MEDIA"
- ref="FULL_SCALE_VOLUME_CURVE"/>
- <volume stream="AUDIO_STREAM_PATCH" deviceCategory="DEVICE_CATEGORY_HEARING_AID"
- ref="FULL_SCALE_VOLUME_CURVE"/>
-</volumes>
-
diff --git a/bluetooth_hearing_aid_audio_policy_configuration.xml b/bluetooth_hearing_aid_audio_policy_configuration.xml
deleted file mode 100644
index 7dcabf7..0000000
--- a/bluetooth_hearing_aid_audio_policy_configuration.xml
+++ /dev/null
@@ -1,20 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- Bluetooth Audio HAL Audio Policy Configuration file -->
-<module name="bluetooth" halVersion="2.0">
- <mixPorts>
- <!-- Hearing AIDs Audio Ports -->
- <mixPort name="hearing aid output" role="source">
- <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
- samplingRates="24000,16000"
- channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
- </mixPort>
- </mixPorts>
- <devicePorts>
- <!-- Hearing AIDs Audio Ports -->
- <devicePort tagName="BT Hearing Aid Out" type="AUDIO_DEVICE_OUT_HEARING_AID" role="sink"/>
- </devicePorts>
- <routes>
- <route type="mix" sink="BT Hearing Aid Out"
- sources="hearing aid output"/>
- </routes>
-</module>
diff --git a/bramble/BoardConfig.mk b/bramble/BoardConfig.mk
index e939343..18a6dff 100644
--- a/bramble/BoardConfig.mk
+++ b/bramble/BoardConfig.mk
@@ -18,4 +18,61 @@
TARGET_SCREEN_DENSITY := 560
TARGET_RECOVERY_UI_MARGIN_HEIGHT := 165
-include device/google/bramble/BoardConfig-common.mk
+include device/google/redbull/BoardConfig-common.mk
+include device/google/bramble-sepolicy/bramble-sepolicy.mk
+
+TARGET_BOARD_INFO_FILE := device/google/bramble/board-info.txt
+USES_DEVICE_GOOGLE_BRAMBLE := true
+
+TARGET_BOARD_COMMON_PATH := device/google/bramble/sm7250
+
+# DTBO partition definitions
+BOARD_PREBUILT_DTBOIMAGE := device/google/bramble-kernel/dtbo.img
+
+TARGET_RECOVERY_UI_LIB := \
+ librecovery_ui_bramble \
+ libnos_citadel_for_recovery \
+ libnos_for_recovery
+
+TARGET_FS_CONFIG_GEN := device/google/bramble/config.fs
+
+# Kernel modules
+ifeq (,$(filter-out bramble_kasan, $(TARGET_PRODUCT)))
+BOARD_VENDOR_KERNEL_MODULES += \
+ $(wildcard device/google/bramble-kernel/kasan/*.ko)
+else ifeq (,$(filter-out bramble_kernel_debug_memory, $(TARGET_PRODUCT)))
+BOARD_VENDOR_KERNEL_MODULES += \
+ $(wildcard device/google/bramble-kernel/debug_memory/*.ko)
+else ifeq (,$(filter-out bramble_kernel_debug_locking, $(TARGET_PRODUCT)))
+BOARD_VENDOR_KERNEL_MODULES += \
+ $(wildcard device/google/bramble-kernel/debug_locking/*.ko)
+else ifeq (,$(filter-out bramble_kernel_debug_hang, $(TARGET_PRODUCT)))
+BOARD_VENDOR_KERNEL_MODULES += \
+ $(wildcard device/google/bramble-kernel/debug_hang/*.ko)
+else ifeq (,$(filter-out bramble_kernel_debug_api, $(TARGET_PRODUCT)))
+BOARD_VENDOR_KERNEL_MODULES += \
+ $(wildcard device/google/bramble-kernel/debug_api/*.ko)
+else
+BOARD_VENDOR_KERNEL_MODULES += \
+ $(wildcard device/google/bramble-kernel/*.ko)
+endif
+
+# DTB
+ifeq (,$(filter-out bramble_kasan, $(TARGET_PRODUCT)))
+BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/kasan
+else ifeq (,$(filter-out bramble_kernel_debug_memory, $(TARGET_PRODUCT)))
+BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/debug_memory
+else ifeq (,$(filter-out bramble_kernel_debug_locking, $(TARGET_PRODUCT)))
+BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/debug_locking
+else ifeq (,$(filter-out bramble_kernel_debug_hang, $(TARGET_PRODUCT)))
+BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/debug_hang
+else ifeq (,$(filter-out bramble_kernel_debug_api, $(TARGET_PRODUCT)))
+BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel/debug_api
+else
+BOARD_PREBUILT_DTBIMAGE_DIR := device/google/bramble-kernel
+endif
+
+# Testing related defines
+#BOARD_PERFSETUP_SCRIPT := platform_testing/scripts/perf-setup/b5-setup.sh
+
+-include vendor/google_devices/bramble/proprietary/BoardConfigVendor.mk
diff --git a/compatibility_matrix.xml b/compatibility_matrix.xml
deleted file mode 100644
index 8b06eef..0000000
--- a/compatibility_matrix.xml
+++ /dev/null
@@ -1,58 +0,0 @@
-<compatibility-matrix version="1.0" type="device">
- <hal format="hidl" optional="false">
- <name>android.frameworks.schedulerservice</name>
- <version>1.0</version>
- <interface>
- <name>ISchedulingPolicyService</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="false">
- <name>android.frameworks.sensorservice</name>
- <version>1.0</version>
- <interface>
- <name>ISensorManager</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="false">
- <name>android.hidl.allocator</name>
- <version>1.0</version>
- <interface>
- <name>IAllocator</name>
- <instance>ashmem</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="false">
- <name>android.hidl.manager</name>
- <version>1.0</version>
- <interface>
- <name>IServiceManager</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="false">
- <name>android.hidl.memory</name>
- <version>1.0</version>
- <interface>
- <name>IMapper</name>
- <instance>ashmem</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="false">
- <name>android.hidl.token</name>
- <version>1.0</version>
- <interface>
- <name>ITokenManager</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="false">
- <name>android.system.wifi.keystore</name>
- <version>1.0</version>
- <interface>
- <name>IKeystore</name>
- <instance>default</instance>
- </interface>
- </hal>
-</compatibility-matrix>
diff --git a/default-permissions.xml b/default-permissions.xml
deleted file mode 100644
index 64f9eaf..0000000
--- a/default-permissions.xml
+++ /dev/null
@@ -1,58 +0,0 @@
-<?xml version='1.0' encoding='utf-8' standalone='yes' ?>
-
-<!-- Copyright (C) 2019 Google Inc.
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!--
- This file contains permissions to be granted by default. Default
- permissions are granted to special platform components and to apps
- that are approved to get default grants. The special components
- are apps that are expected tto work out-of-the-box as they provide
- core use cases such as default dialer, default email, etc. These
- grants are managed by the platform. The apps that are additionally
- approved for default grants are ones that provide carrier specific
- functionality, ones legally required at some location, ones providing
- alternative disclosure and opt-out UI, ones providing highlight features
- of a dedicated device, etc. This file contains only the latter exceptions.
- Fixed permissions cannot be controlled by the user and need a special
- approval. Typically these are to ensure either legally mandated functions
- or the app is considered a part of the OS.
--->
-
-<exceptions>
-
- <!-- This is an example of an exception:
- <exception
- package="foo.bar.permission"
- <permission name="android.permission.READ_CONTACTS" fixed="true"/>
- <permission name="android.permission.READ_CALENDAR" fixed="false"/>
- </exception>
- -->
-
- <exception
- package="com.google.intelligence.sense">
- <!-- Record Audio -->
- <permission name="android.permission.RECORD_AUDIO" fixed="false"/>
- </exception>
-
- <exception package="com.google.android.settings.intelligence">
- <!-- Calendar -->
- <permission name="android.permission.READ_CALENDAR" fixed="true"/>
- <!-- Location -->
- <permission name="android.permission.ACCESS_FINE_LOCATION" fixed="true"/>
- <permission name="android.permission.ACCESS_BACKGROUND_LOCATION" fixed="true"/>
- </exception>
-
-</exceptions>
diff --git a/device-bramble.mk b/device-bramble.mk
index d70e939..9e000da 100644
--- a/device-bramble.mk
+++ b/device-bramble.mk
@@ -16,7 +16,18 @@
PRODUCT_HARDWARE := bramble
-include device/google/bramble/device-common.mk
+ifeq ($(TARGET_PREBUILT_KERNEL),)
+ LOCAL_KERNEL := device/google/bramble-kernel/Image.lz4
+else
+ LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
+endif
+
+PRODUCT_VENDOR_KERNEL_HEADERS := device/google/bramble-kernel/sm7250/kernel-headers
+
+include device/google/redbull/device-common.mk
+
+PRODUCT_SOONG_NAMESPACES += \
+ device/google/bramble
DEVICE_PACKAGE_OVERLAYS += device/google/bramble/bramble/overlay
@@ -36,3 +47,44 @@
frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml
+# LOCAL_PATH is device/google/redbull before this
+LOCAL_PATH := device/google/bramble
+
+ifeq ($(wildcard vendor/google_devices/bramble/proprietary/device-vendor-bramble.mk),)
+ BUILD_WITHOUT_VENDOR := true
+endif
+
+PRODUCT_PACKAGES += \
+ android.hardware.usb@1.2-service.bramble
+
+# Vibrator HAL
+PRODUCT_PACKAGES += \
+ android.hardware.vibrator@1.3-service.bramble
+
+# Dumpstate HAL
+PRODUCT_PACKAGES += \
+ android.hardware.dumpstate@1.0-service.bramble
+
+#per device
+PRODUCT_COPY_FILES += \
+ $(LOCAL_PATH)/bramble/init.bramble.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.bramble.rc
+
+# insmod files
+PRODUCT_COPY_FILES += \
+ $(LOCAL_PATH)/init.insmod.bramble.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.bramble.cfg
+
+# Recovery
+PRODUCT_COPY_FILES += \
+ $(LOCAL_PATH)/init.recovery.device.rc:recovery/root/init.recovery.bramble.rc \
+ $(LOCAL_PATH)/thermal-engine-$(PRODUCT_HARDWARE).conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine-$(PRODUCT_HARDWARE).conf
+
+PRODUCT_PACKAGES += \
+ sensors.$(PRODUCT_HARDWARE) \
+
+# Thermal HAL config
+PRODUCT_COPY_FILES += \
+ $(LOCAL_PATH)/thermal_info_config_$(PRODUCT_HARDWARE).json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json
+
+# Audio effects
+PRODUCT_PACKAGES += \
+ libqcomvoiceprocessingdescriptors
diff --git a/device-common.mk b/device-common.mk
deleted file mode 100644
index 6f6c5d9..0000000
--- a/device-common.mk
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# define hardware platform
-PRODUCT_PLATFORM := sm7250
-
-include device/google/bramble/device.mk
-
-# Set Vendor SPL to match platform
-VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)
-
-# A2DP offload enabled for compilation
-AUDIO_FEATURE_ENABLED_A2DP_OFFLOAD := true
-
-# A2DP offload supported
-PRODUCT_PROPERTY_OVERRIDES += \
-ro.bluetooth.a2dp_offload.supported=true
-
-# A2DP offload disabled (UI toggle property)
-PRODUCT_PROPERTY_OVERRIDES += \
-persist.bluetooth.a2dp_offload.disabled=false
-
-# A2DP offload DSP supported encoder list
-PRODUCT_PROPERTY_OVERRIDES += \
-persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac
-
-# Enable AAC frame ctl for A2DP sinks
-PRODUCT_PROPERTY_OVERRIDES += \
-persist.vendor.bt.aac_frm_ctl.enabled=true
-
-# Set lmkd options
-PRODUCT_PRODUCT_PROPERTIES += \
- ro.config.low_ram = false \
- ro.lmk.kill_heaviest_task = true \
- ro.lmk.kill_timeout_ms = 100 \
- ro.lmk.use_minfree_levels = true \
- ro.lmk.log_stats = true \
-
-# Modem logging file
-PRODUCT_COPY_FILES += \
- device/google/bramble/init.logging.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).logging.rc
-
-# Pixelstats broken mic detection
-PRODUCT_PROPERTY_OVERRIDES += vendor.audio.mic_break=true
-
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms=50
-
-# MIDI feature
-PRODUCT_COPY_FILES += \
- frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml
diff --git a/device.mk b/device.mk
deleted file mode 100644
index ef4d9ae..0000000
--- a/device.mk
+++ /dev/null
@@ -1,832 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-LOCAL_PATH := device/google/bramble
-
-PRODUCT_VENDOR_MOVE_ENABLED := true
-TARGET_BOARD_PLATFORM := lito
-
-# Enable keymaster 4.0
-KMGK_USE_QTI_SERVICE := true
-ENABLE_KM_4_0 := true
-
-PRODUCT_SOONG_NAMESPACES += \
- hardware/google/av \
- hardware/google/interfaces \
- hardware/google/pixel \
- device/google/bramble \
- hardware/qcom/sm7250 \
- vendor/google/airbrush/floral \
- vendor/google/biometrics/face \
- vendor/google/darwinn \
- hardware/qcom/sm7250/display \
- vendor/google/camera \
- vendor/qcom/sm7250 \
- vendor/google/interfaces
-
-PRODUCT_PROPERTY_OVERRIDES += \
- keyguard.no_require_sim=true
-
-# enable cal by default on accel sensor
-PRODUCT_PRODUCT_PROPERTIES += \
- persist.vendor.debug.sensors.accel_cal=1
-
-# The default value of this variable is false and should only be set to true when
-# the device allows users to retain eSIM profiles after factory reset of user data.
-PRODUCT_PRODUCT_PROPERTIES += \
- masterclear.allow_retain_esim_profiles_after_fdr=true
-
-PRODUCT_COPY_FILES += \
- device/google/bramble/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \
- frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
- frameworks/native/data/etc/android.software.verified_boot.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/permissions/android.software.verified_boot.xml
-
-PRODUCT_PACKAGES += \
- messaging
-
-TARGET_PRODUCT_PROP := $(LOCAL_PATH)/product.prop
-
-$(call inherit-product, $(LOCAL_PATH)/utils.mk)
-
-# Installs gsi keys into ramdisk, to boot a GSI with verified boot.
-$(call inherit-product, $(SRC_TARGET_DIR)/product/gsi_keys.mk)
-
-ifeq ($(wildcard vendor/google_devices/bramble/proprietary/device-vendor-bramble.mk),)
- BUILD_WITHOUT_VENDOR := true
-endif
-
-ifeq ($(TARGET_PREBUILT_KERNEL),)
- LOCAL_KERNEL := device/google/bramble-kernel/Image.lz4
-else
- LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
-endif
-PRODUCT_VENDOR_KERNEL_HEADERS := device/google/bramble-kernel/sm7250/kernel-headers
-
-
-PRODUCT_CHARACTERISTICS := nosdcard
-PRODUCT_SHIPPING_API_LEVEL := 28
-
-DEVICE_PACKAGE_OVERLAYS += $(LOCAL_PATH)/overlay
-
-#
-PRODUCT_COPY_FILES += \
- $(LOCAL_KERNEL):kernel \
- $(LOCAL_PATH)/fstab.hardware:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.$(PRODUCT_PLATFORM) \
- $(LOCAL_PATH)/fstab.persist:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.persist \
- $(LOCAL_PATH)/init.hardware.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).rc \
- $(LOCAL_PATH)/init.power.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).power.rc \
- $(LOCAL_PATH)/init.radio.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.radio.sh \
- $(LOCAL_PATH)/init.hardware.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).usb.rc \
- $(LOCAL_PATH)/init.insmod.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.insmod.sh \
- $(LOCAL_PATH)/init.qcom.wlan.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qcom.wlan.sh \
- $(LOCAL_PATH)/init.sensors.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.sensors.sh \
- $(LOCAL_PATH)/sensors.hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf \
- $(LOCAL_PATH)/thermal-engine-$(PRODUCT_HARDWARE).conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine-$(PRODUCT_HARDWARE).conf \
- $(LOCAL_PATH)/ueventd.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc
-
-
-MSM_VIDC_TARGET_LIST := lito # Get the color format from kernel headers
-MASTER_SIDE_CP_TARGET_LIST := lito # ION specific settings
-
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
- PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/init.hardware.mpssrfs.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc
- PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/init.hardware.diag.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc
- PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/init.hardware.chamber.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).chamber.rc
- PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/init.hardware.ipa.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_PLATFORM).ipa.rc
-else
- PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/init.hardware.mpssrfs.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).mpssrfs.rc
- PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/init.hardware.diag.rc.user:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_PLATFORM).diag.rc
-endif
-
-# A/B support
-PRODUCT_PACKAGES += \
- otapreopt_script \
- cppreopts.sh \
- update_engine \
- update_verifier
-
-# Use Sdcardfs
-PRODUCT_PRODUCT_PROPERTIES += \
- ro.sys.sdcardfs=1
-
-PRODUCT_PACKAGES += \
- bootctrl.lito
-
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.cp_system_other_odex=1
-
-AB_OTA_POSTINSTALL_CONFIG += \
- RUN_POSTINSTALL_system=true \
- POSTINSTALL_PATH_system=system/bin/otapreopt_script \
- FILESYSTEM_TYPE_system=ext4 \
- POSTINSTALL_OPTIONAL_system=true
-
-# Enable update engine sideloading by including the static version of the
-# boot_control HAL and its dependencies.
-PRODUCT_STATIC_BOOT_CONTROL_HAL := \
- bootctrl.lito \
- libgptutils \
- libz \
- libcutils
-
-PRODUCT_PACKAGES += \
- update_engine_sideload \
- sg_write_buffer \
- f2fs_io \
- check_f2fs
-
-AB_OTA_POSTINSTALL_CONFIG += \
- RUN_POSTINSTALL_vendor=true \
- POSTINSTALL_PATH_vendor=bin/checkpoint_gc \
- FILESYSTEM_TYPE_vendor=ext4 \
- POSTINSTALL_OPTIONAL_vendor=true
-
-# Userdata Checkpointing OTA GC
-PRODUCT_PACKAGES += \
- checkpoint_gc
-
-# The following modules are included in debuggable builds only.
-PRODUCT_PACKAGES_DEBUG += \
- bootctl \
- r.vendor \
- update_engine_client
-
-PRODUCT_COPY_FILES += \
- frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \
- frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \
- frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\
- frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\
- frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \
- frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml \
- frameworks/native/data/etc/android.hardware.biometrics.face.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.biometrics.face.xml\
- frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \
- frameworks/native/data/etc/android.hardware.sensor.assist.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.assist.xml \
- frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \
- frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \
- frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml \
- frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \
- frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \
- frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \
- frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml \
- frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
- frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \
- frameworks/native/data/etc/android.hardware.telephony.gsm.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.gsm.xml \
- frameworks/native/data/etc/android.hardware.telephony.cdma.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.cdma.xml \
- frameworks/native/data/etc/android.hardware.telephony.ims.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.ims.xml \
- frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \
- frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
- frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
- frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \
- frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
- frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \
- frameworks/native/data/etc/android.software.sip.voip.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.sip.voip.xml \
- frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \
- frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
- frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \
- frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
- frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
- frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
- frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \
- frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \
- frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \
- frameworks/native/data/etc/android.hardware.telephony.carrierlock.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.telephony.carrierlock.xml \
- frameworks/native/data/etc/android.hardware.strongbox_keystore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.strongbox_keystore.xml \
- frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \
- frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml
-
-# Audio fluence, ns, aec property, voice and media volume steps
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.qc.sdk.audio.fluencetype=fluencepro \
- persist.audio.fluence.voicecall=true \
- persist.audio.fluence.speaker=true \
- persist.audio.fluence.voicecomm=true \
- persist.audio.fluence.voicerec=false \
- ro.config.vc_call_vol_steps=7 \
- ro.config.media_vol_steps=25 \
-
-# Audio Features
-PRODUCT_PROPERTY_OVERRIDES += \
- vendor.audio.feature.external_dsp.enable=true \
- vendor.audio.feature.external_speaker.enable=true \
- vendor.audio.feature.concurrent_capture.enable=false \
- vendor.audio.feature.a2dp_offload.enable=true \
- vendor.audio.feature.hfp.enable=true \
- vendor.audio.feature.hwdep_cal.enable=true \
- vendor.audio.feature.incall_music.enable=true \
- vendor.audio.feature.maxx_audio.enable=true \
- vendor.audio.feature.spkr_prot.enable=true \
- vendor.audio.feature.usb_offload.enable=true \
- vendor.audio.feature.audiozoom.enable=true \
- vendor.audio.feature.snd_mon.enable=true \
-
-# MaxxAudio effect and add rotation monitor
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.audio.monitorRotation=true
-
-# Iaxxx streming and factory binary
-PRODUCT_PACKAGES += \
- libtunnel \
- libodsp \
- adnc_strm.primary.default \
- sound_trigger.primary.lito
-
-# Add Oslo test for debug rom
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PACKAGES += \
- tunneling_hal_test \
- sensor_param_test \
- oslo_config_test \
- odsp_api_test \
- crash_event_logger \
- dump_debug_info \
- get_pwr_stats \
- crash_trigger_test
-endif
-
-# graphics
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.opengles.version=196610
-
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.vendor.display.foss=1 \
- ro.vendor.display.paneltype=2 \
- ro.vendor.display.sensortype=2 \
- vendor.display.foss.config=1 \
- vendor.display.foss.config_path=/vendor/etc/FOSSConfig.xml
-
-# camera google face detection
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.camera.googfd.enable=1
-
-# camera disable FaceSSD temporarily
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.camera.facessd.enable=0
-
-# camera hal buffer management
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.camera.managebuffer.enable=1
-
-
-# OEM Unlock reporting
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
- ro.oem_unlock_supported=1
-
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.vendor.cne.feature=1 \
- persist.vendor.data.iwlan.enable=true \
- persist.radio.RATE_ADAPT_ENABLE=1 \
- persist.radio.ROTATION_ENABLE=1 \
- persist.radio.VT_ENABLE=1 \
- persist.radio.VT_HYBRID_ENABLE=1 \
- persist.vendor.radio.apm_sim_not_pwdn=1 \
- persist.vendor.radio.custom_ecc=1 \
- persist.vendor.radio.data_ltd_sys_ind=1 \
- persist.radio.videopause.mode=1 \
- persist.vendor.radio.multisim_switch_support=true \
- persist.vendor.radio.sib16_support=1 \
- persist.vendor.radio.data_con_rprt=true \
- persist.vendor.radio.relay_oprt_change=1 \
- persist.vendor.radio.no_wait_for_card=1 \
- persist.vendor.radio.sap_silent_pin=1 \
- persist.rcs.supported=1 \
- vendor.rild.libpath=/vendor/lib64/libril-qc-hal-qmi.so \
- ro.hardware.keystore_desede=true \
-
-# Disable snapshot timer
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.vendor.radio.snapshot_enabled=0 \
- persist.vendor.radio.snapshot_timer=0
-
-# Enable USB debugging by default for bringup
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.sys.usb.config=adb
-
-# RenderScript HAL
-PRODUCT_PACKAGES += \
- android.hardware.renderscript@1.0-impl
-
-# Health HAL
-PRODUCT_PACKAGES += \
- android.hardware.health@2.0-service
-
-# Light HAL
-PRODUCT_PACKAGES += \
- lights.lito \
- hardware.google.light@1.0-service
-
-# Memtrack HAL
-PRODUCT_PACKAGES += \
- memtrack.lito \
- android.hardware.memtrack@1.0-impl \
- android.hardware.memtrack@1.0-service
-
-# Bluetooth HAL
-PRODUCT_PACKAGES += \
- android.hardware.bluetooth@1.0-impl-qti \
- android.hardware.bluetooth@1.0-service-qti
-
-#Bluetooth SAR HAL
-PRODUCT_PACKAGES += \
- vendor.qti.hardware.bluetooth_sar@1.0-impl
-
-# Bluetooth SoC
-PRODUCT_PROPERTY_OVERRIDES += \
- vendor.qcom.bluetooth.soc=cherokee
-
-# Property for loading BDA from device tree
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.vendor.bt.bdaddr_path=/proc/device-tree/chosen/cdt/cdb2/bt_addr
-
-# Bluetooth WiPower
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.vendor.bluetooth.emb_wp_mode=false \
- ro.vendor.bluetooth.wipower=false
-
-# DRM HAL
-PRODUCT_PACKAGES += \
- android.hardware.drm@1.0-impl \
- android.hardware.drm@1.0-service \
- android.hardware.drm@1.2-service.clearkey \
- android.hardware.drm@1.2-service.widevine
-
-# NFC and Secure Element packages
-PRODUCT_PACKAGES += \
- NfcNci \
- Tag \
- SecureElement \
- android.hardware.nfc@1.2-service.st \
- android.hardware.secure_element@1.0-service.st
-
-PRODUCT_COPY_FILES += \
- device/google/bramble/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
- device/google/bramble/nfc/libese-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libese-hal-st.conf \
- device/google/bramble/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
-
-PRODUCT_PACKAGES += \
- android.hardware.usb@1.2-service.bramble
-
-# Storage health HAL
-PRODUCT_PACKAGES += \
- android.hardware.health.storage@1.0-service
-
-PRODUCT_PACKAGES += \
- libmm-omxcore \
- libOmxCore \
- libstagefrighthw \
- libOmxVdec \
- libOmxVdecHevc \
- libOmxVenc \
- libc2dcolorconvert
-
-# Enable Codec 2.0
-PRODUCT_PACKAGES += \
- libqcodec2 \
- vendor.qti.media.c2@1.0-service \
-
-PRODUCT_PACKAGES += \
- android.hardware.camera.provider@2.4-impl \
- android.hardware.camera.provider@2.4-service_64 \
- camera.lito \
- libgooglecamerahal \
- libgooglecamerahwl_impl \
- libgoogle_camera_hal_tests \
- libqomx_core \
- libmmjpeg_interface \
- libmmcamera_interface \
- libcameradepthcalibrator
-
-PRODUCT_PACKAGES += \
- sensors.$(PRODUCT_HARDWARE) \
- android.hardware.sensors@2.0-impl \
- android.hardware.sensors@2.0-service \
- android.hardware.sensors@2.0-service.rc
-
-PRODUCT_PACKAGES += \
- fs_config_dirs \
- fs_config_files
-
-# Context hub HAL
-PRODUCT_PACKAGES += \
- android.hardware.contexthub@1.0-impl.generic \
- android.hardware.contexthub@1.0-service
-
-# Boot control HAL
-PRODUCT_PACKAGES += \
- android.hardware.boot@1.0-impl \
- android.hardware.boot@1.0-service \
-
-# Vibrator HAL
-PRODUCT_PACKAGES += \
- android.hardware.vibrator@1.3-service.bramble \
-
-# Thermal HAL
-PRODUCT_PACKAGES += \
- android.hardware.thermal@2.0-service.pixel \
-
-# Thermal HAL config
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/thermal_info_config_$(PRODUCT_HARDWARE).json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
-
-#GNSS HAL
-PRODUCT_PACKAGES += \
- libgps.utils \
- libgnss \
- liblocation_api \
- android.hardware.gnss@2.0-impl-qti \
- android.hardware.gnss@2.0-service-qti
-
-# Wireless Charger HAL
-PRODUCT_PACKAGES += \
- vendor.google.wireless_charger@1.0
-
-ENABLE_VENDOR_RIL_SERVICE := true
-
-HOSTAPD := hostapd
-HOSTAPD += hostapd_cli
-PRODUCT_PACKAGES += $(HOSTAPD)
-
-WPA := wpa_supplicant.conf
-WPA += wpa_supplicant_wcn.conf
-WPA += wpa_supplicant
-PRODUCT_PACKAGES += $(WPA)
-
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PACKAGES += wpa_cli
-endif
-
-# Wifi
-PRODUCT_PACKAGES += \
- android.hardware.wifi@1.0-service \
- wificond \
- libwpa_client
-
-# WLAN driver configuration files
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \
- $(LOCAL_PATH)/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
- $(LOCAL_PATH)/wifi_concurrency_cfg.txt:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wifi_concurrency_cfg.txt \
- $(LOCAL_PATH)/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini \
-
-LIB_NL := libnl_2
-PRODUCT_PACKAGES += $(LIB_NL)
-
-# Factory OTA
-PRODUCT_PACKAGES += \
- FactoryOta
-
-# Audio effects
-PRODUCT_PACKAGES += \
- libvolumelistener \
- libqcomvisualizer \
- libqcomvoiceprocessing \
- libqcomvoiceprocessingdescriptors \
- libqcompostprocbundle
-
-PRODUCT_PACKAGES += \
- audio.primary.lito \
- audio.a2dp.default \
- audio.usb.default \
- audio.r_submix.default \
- libaudio-resampler \
- audio.hearing_aid.default \
- audio.bluetooth.default
-
-PRODUCT_PACKAGES += \
- android.hardware.audio@5.0-impl:32 \
- android.hardware.audio.effect@5.0-impl:32 \
- android.hardware.broadcastradio@1.0-impl \
- android.hardware.soundtrigger@2.2-impl \
- android.hardware.bluetooth.audio@2.0-impl \
- android.hardware.audio@2.0-service
-
-# Modules for Audio HAL
-PRODUCT_PACKAGES += \
- libcirrusspkrprot \
- libsndmonitor \
- libmalistener \
- liba2dpoffload \
- btaudio_offload_if \
- libmaxxaudio \
- libaudiozoom
-
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PACKAGES += \
- tinyplay \
- tinycap \
- tinymix \
- tinypcminfo \
- cplay
-endif
-
-# Audio hal xmls
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/audio/mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths.xml \
- $(LOCAL_PATH)/audio/audio_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info.xml \
- $(LOCAL_PATH)/audio/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml \
- $(LOCAL_PATH)/audio/sound_trigger_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths.xml \
-
-# Audio Policy tables
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
- $(LOCAL_PATH)/audio_policy_configuration_a2dp_offload_disabled.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration_a2dp_offload_disabled.xml \
- $(LOCAL_PATH)/audio_policy_configuration_bluetooth_legacy_hal.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration_bluetooth_legacy_hal.xml \
- $(LOCAL_PATH)/bluetooth_hearing_aid_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_hearing_aid_audio_policy_configuration.xml \
- $(LOCAL_PATH)/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \
- $(LOCAL_PATH)/audio/audio_configs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_configs.xml \
- $(LOCAL_PATH)/audio/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_effects.xml \
- $(LOCAL_PATH)/audio/audio_io_policy.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_io_policy.conf \
- frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \
- frameworks/av/services/audiopolicy/config/a2dp_in_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_in_audio_policy_configuration.xml \
- frameworks/av/services/audiopolicy/config/bluetooth_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_audio_policy_configuration.xml \
- frameworks/av/services/audiopolicy/config/hearing_aid_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/hearing_aid_audio_policy_configuration.xml \
- frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \
- frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
- frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml
-
-# Audio ACDB data
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/audio/acdbdata/Bluetooth_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Bluetooth_cal.acdb \
- $(LOCAL_PATH)/audio/acdbdata/General_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/General_cal.acdb \
- $(LOCAL_PATH)/audio/acdbdata/Global_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Global_cal.acdb \
- $(LOCAL_PATH)/audio/acdbdata/Handset_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Handset_cal.acdb \
- $(LOCAL_PATH)/audio/acdbdata/Hdmi_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Hdmi_cal.acdb \
- $(LOCAL_PATH)/audio/acdbdata/Headset_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Headset_cal.acdb \
- $(LOCAL_PATH)/audio/acdbdata/Speaker_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/Speaker_cal.acdb \
- $(LOCAL_PATH)/audio/acdbdata/adsp_avs_config.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/adsp_avs_config.acdb
-
-# Audio ACDB workspace files for QACT
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/audio/acdbdata/workspaceFile.qwsp:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/workspaceFile.qwsp
-endif
-
-# Audio speaker tunning config data
-
-# Audio audiozoom config data
-
-# RT5514 SoundTrigger
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/audio/rt5514_dsp_fw1.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw1.bin \
- $(LOCAL_PATH)/audio/rt5514_dsp_fw2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw2.bin \
- $(LOCAL_PATH)/audio/rt5514_dsp_fw3.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw3.bin \
- $(LOCAL_PATH)/audio/rt5514_dsp_fw4.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/rt5514_dsp_fw4.bin
-
-# CS35L41 SPEAKER AMP
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/audio/cs35l41/cs35l41-dsp1-spk-cali.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/cs35l41-dsp1-spk-cali.bin \
- $(LOCAL_PATH)/audio/cs35l41/cs35l41-dsp1-spk-cali.wmfw:$(TARGET_COPY_OUT_VENDOR)/firmware/cs35l41-dsp1-spk-cali.wmfw \
- $(LOCAL_PATH)/audio/cs35l41/R-cs35l41-dsp1-spk-cali.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/R-cs35l41-dsp1-spk-cali.bin \
- $(LOCAL_PATH)/audio/cs35l41/cs35l41-dsp1-spk-prot.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/cs35l41-dsp1-spk-prot.bin \
- $(LOCAL_PATH)/audio/cs35l41/cs35l41-dsp1-spk-prot.wmfw:$(TARGET_COPY_OUT_VENDOR)/firmware/cs35l41-dsp1-spk-prot.wmfw \
- $(LOCAL_PATH)/audio/cs35l41/R-cs35l41-dsp1-spk-prot.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/R-cs35l41-dsp1-spk-prot.bin
-
-# and ensure that the xaac decoder is built
-PRODUCT_PACKAGES += \
- libstagefright_soft_xaacdec.vendor
-
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \
- $(LOCAL_PATH)/media_profiles_V1_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml
-
-# Vendor seccomp policy files for media components:
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy
-
-PRODUCT_PROPERTY_OVERRIDES += \
- audio.snd_card.open.retries=50
-
-
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
-# Subsystem ramdump
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.vendor.sys.ssr.enable_ramdumps=1
-endif
-
-# Subsystem silent restart
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.vendor.sys.ssr.restart_level=modem,SDXPRAIRIE,adsp,slpi
-
-# setup dalvik vm configs
-$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)
-
-# Use the default charger mode images
-PRODUCT_PACKAGES += \
- charger_res_images
-
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
-# b/36703476: Set default log size to 1M
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.logd.size=1M
-# b/114766334: persist all logs by default rotating on 30 files of 1MiB
-PRODUCT_PROPERTY_OVERRIDES += \
- logd.logpersistd=logcatd \
- logd.logpersistd.size=30
-endif
-
-# Dumpstate HAL
-PRODUCT_PACKAGES += \
- android.hardware.dumpstate@1.0-service.bramble
-
-# Citadel
-#PRODUCT_PACKAGES += \
- citadeld \
- citadel_updater \
- android.hardware.authsecret@1.0-service.citadel \
- android.hardware.oemlock@1.0-service.citadel \
- android.hardware.weaver@1.0-service.citadel \
- android.hardware.keymaster@4.0-service.citadel \
- wait_for_strongbox
-
-# Citadel debug stuff
-#PRODUCT_PACKAGES_DEBUG += \
- test_citadel
-
-# Storage: for factory reset protection feature
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.frp.pst=/dev/block/bootdevice/by-name/frp
-
-PRODUCT_PACKAGES += \
- vndk-sp
-
-PRODUCT_ENFORCE_RRO_TARGETS := *
-
-# Override heap growth limit due to high display density on device
-PRODUCT_PROPERTY_OVERRIDES += \
- dalvik.vm.heapgrowthlimit=256m
-
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:system/lib/android.hidl.base@1.0.so \
- $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:system/lib64/android.hidl.base@1.0.so \
- $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-32:vendor/lib/android.hidl.base@1.0.so \
- $(LOCAL_PATH)/hidl/android.hidl.base@1.0.so-64:vendor/lib64/android.hidl.base@1.0.so \
-
-PRODUCT_PACKAGES += \
- ipacm \
- IPACM_cfg.xml
-
-#Set default CDMA subscription to RUIM
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.telephony.default_cdma_sub=0
-
-# Set display color mode to Adaptive by default
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.sys.sf.color_saturation=1.0 \
- persist.sys.sf.native_mode=2 \
- persist.sys.sf.color_mode=9
-
-# Keymaster configuration
-PRODUCT_COPY_FILES += \
- frameworks/native/data/etc/android.software.device_id_attestation.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.device_id_attestation.xml
-
-# Enable modem logging
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.radio.log_loc="/data/vendor/modem_dump" \
- ro.radio.log_prefix="modem_log_"
-
-# Enable modem logging for debug
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PROPERTY_OVERRIDES += \
- persist.vendor.sys.modem.diag.mdlog=true \
- persist.vendor.sys.modem.diag.mdlog_br_num=5
-else
-endif
-
-# Preopt SystemUI
-PRODUCT_DEXPREOPT_SPEED_APPS += \
- SystemUIGoogle
-
-# Enable stats logging in LMKD
-TARGET_LMKD_STATS_LOG := true
-PRODUCT_PRODUCT_PROPERTIES += \
- ro.lmk.log_stats=true
-
-# default usb oem functions
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
- PRODUCT_PROPERTY_OVERRIDES += \
- persist.vendor.usb.usbradio.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl_gsi,rmnet_gsi
-endif
-
-# Early phase offset configuration for SurfaceFlinger (b/75985430)
-PRODUCT_PROPERTY_OVERRIDES += \
- debug.sf.early_phase_offset_ns=500000
-PRODUCT_PROPERTY_OVERRIDES += \
- debug.sf.early_app_phase_offset_ns=500000
-PRODUCT_PROPERTY_OVERRIDES += \
- debug.sf.early_gl_phase_offset_ns=3000000
-PRODUCT_PROPERTY_OVERRIDES += \
- debug.sf.early_gl_app_phase_offset_ns=15000000
-
-# Do not skip init trigger by default
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
- vendor.skip.init=0
-
-BOARD_USES_QCNE := true
-
-#per device
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/bramble/init.bramble.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.bramble.rc
-
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/sec_config:$(TARGET_COPY_OUT_VENDOR)/etc/sec_config
-
-# power HAL
-PRODUCT_PACKAGES += \
- android.hardware.power@1.3-service.pixel-libperfmgr
-
-# Disable ro.adb.secure for the factory build to work around dead touchscreens
-# Bug: 116250643
-PRODUCT_PRODUCT_PROPERTIES += \
- ro.adb.secure=0
-
-# GPS configuration file
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf
-
-# default atrace HAL
-PRODUCT_PACKAGES += \
- android.hardware.atrace@1.0-service
-
-# Reliability reporting
-PRODUCT_PACKAGES += \
- pixelstats-vendor
-
-# fastbootd
-PRODUCT_PACKAGES += \
- android.hardware.fastboot@1.0-impl.pixel \
- fastbootd
-
-# insmod files
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/init.insmod.bramble.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.bramble.cfg
-
-# Use /product/etc/fstab.postinstall to mount system_other
-PRODUCT_PRODUCT_PROPERTIES += \
- ro.postinstall.fstab.prefix=/product
-
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall
-
-# powerstats HAL
-PRODUCT_PACKAGES += \
- android.hardware.power.stats@1.0-service.pixel
-
-# Recovery
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/init.recovery.device.rc:recovery/root/init.recovery.bramble.rc
-
-# Do not skip init trigger by default
-PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
- vendor.skip.init=0
-
-# Oslo feature flag
-PRODUCT_PRODUCT_PROPERTIES += \
- ro.vendor.aware_available=true
-
-QTI_TELEPHONY_UTILS := qti-telephony-utils
-QTI_TELEPHONY_UTILS += qti_telephony_utils.xml
-PRODUCT_PACKAGES += $(QTI_TELEPHONY_UTILS)
-
-HIDL_WRAPPER := qti-telephony-hidl-wrapper
-HIDL_WRAPPER += qti_telephony_hidl_wrapper.xml
-PRODUCT_PACKAGES += $(HIDL_WRAPPER)
-
-# Increment the SVN for any official public releases
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.vendor.build.svn=1
-
-# ZRAM writeback
-PRODUCT_PROPERTY_OVERRIDES += \
- ro.zram.mark_idle_delay_mins=60 \
- ro.zram.first_wb_delay_mins=180 \
- ro.zram.periodic_wb_delay_hours=24
-
-# Disable SPU usage
-PRODUCT_PROPERTY_OVERRIDES += \
- vendor.gatekeeper.disable_spu = true
-
-PRODUCT_COPY_FILES += \
- $(LOCAL_PATH)/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
-
--include hardware/qcom/sm7250/display/config/display-product.mk
diff --git a/device_framework_matrix.xml b/device_framework_matrix.xml
deleted file mode 100644
index 039cdf6..0000000
--- a/device_framework_matrix.xml
+++ /dev/null
@@ -1,249 +0,0 @@
-<compatibility-matrix version="1.0" type="framework">
- <hal format="hidl" optional="true">
- <name>com.qualcomm.qti.imscmservice</name>
- <version>2.1</version>
- <interface>
- <name>IImsCmService</name>
- <instance>qti.ims.connectionmanagerservice</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>com.qualcomm.qti.uceservice</name>
- <version>2.0</version>
- <interface>
- <name>IUceService</name>
- <instance>com.qualcomm.qti.uceservice</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.qti.data.factory</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IFactory</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>com.quicinc.cne.api</name>
- <version>1.1</version>
- <interface>
- <name>IApiService</name>
- <instance>cnd</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>com.quicinc.cne.server</name>
- <version>2.1</version>
- <interface>
- <name>IServer</name>
- <instance>cnd</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>hardware.google.media.c2</name>
- <version>1.0</version>
- <interface>
- <name>IComponentStore</name>
- <instance>default</instance>
- <instance>software</instance>
- </interface>
- <interface>
- <name>IConfigurable</name>
- <instance>default</instance>
- <instance>software</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>android.hardware.radio.config</name>
- <version>1.1</version>
- <interface>
- <name>IRadioConfig</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.display.color</name>
- <version>1.0-4</version>
- <interface>
- <name>IDisplayColor</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.display.config</name>
- <version>1.0-9</version>
- <interface>
- <name>IDisplayConfig</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.google.radioext</name>
- <version>1.1</version>
- <interface>
- <name>IRadioExt</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.google.wireless_charger</name>
- <version>1.0</version>
- <interface>
- <name>IWirelessCharger</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.google.airbrush.manager</name>
- <version>1.0</version>
- <interface>
- <name>IAirbrushManager</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.radio.am</name>
- <version>1.0</version>
- <interface>
- <name>IQcRilAudio</name>
- <instance>slot1</instance>
- <instance>slot2</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.radio.atcmdfwd</name>
- <version>1.0</version>
- <interface>
- <name>IAtCmdFwd</name>
- <instance>AtCmdFwdService</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.radio.ims</name>
- <version>1.4</version>
- <interface>
- <name>IImsRadio</name>
- <instance>imsradio0</instance>
- <instance>imsradio1</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.radio.lpa</name>
- <version>1.0</version>
- <interface>
- <name>IUimLpa</name>
- <instance>UimLpa0</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.radio.qcrilhook</name>
- <version>1.0</version>
- <interface>
- <name>IQtiOemHook</name>
- <instance>oemhook0</instance>
- <instance>oemhook1</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.radio.uim</name>
- <version>1.1</version>
- <interface>
- <name>IUim</name>
- <instance>Uim0</instance>
- <instance>Uim1</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.radio.uim_remote_client</name>
- <version>1.0</version>
- <interface>
- <name>IUimRemoteServiceClient</name>
- <instance>uimRemoteClient0</instance>
- <instance>uimRemoteClient1</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.radio.uim_remote_server</name>
- <version>1.0</version>
- <interface>
- <name>IUimRemoteServiceServer</name>
- <instance>uimRemoteServer0</instance>
- <instance>uimRemoteServer1</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.tui_comm</name>
- <version>1.0</version>
- <interface>
- <name>ITuiComm</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.display.allocator</name>
- <version>3.0</version>
- <interface>
- <name>IQtiAllocator</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.display.mapper</name>
- <version>3.0</version>
- <interface>
- <name>IQtiMapper</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.display.mapperextensions</name>
- <version>1.0</version>
- <interface>
- <name>IQtiMapperExtensions</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.imsrtpservice</name>
- <version>2.0</version>
- <interface>
- <name>IRTPService</name>
- <instance>imsrtpservice</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.ims.callinfo</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IService</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>hardware.google.light</name>
- <version>1.0</version>
- <interface>
- <name>ILight</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.qti.hardware.bluetooth_sar</name>
- <version>1.0</version>
- <interface>
- <name>IBluetoothSar</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl" optional="true">
- <name>vendor.google.wifi_ext</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IWifiExt</name>
- <instance>default</instance>
- </interface>
- </hal>
-</compatibility-matrix>
diff --git a/framework_manifest.xml b/framework_manifest.xml
deleted file mode 100644
index b2276a5..0000000
--- a/framework_manifest.xml
+++ /dev/null
@@ -1,39 +0,0 @@
-<!-- Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above
- copyright notice, this list of conditions and the following
- disclaimer in the documentation and/or other materials provided
- with the distribution.
- * Neither the name of The Linux Foundation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--->
-<manifest version="1.0" type="framework">
- <!-- atfwd -->
- <hal format="hidl">
- <name>vendor.qti.hardware.radio.atcmdfwd</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IAtCmdFwd</name>
- <instance>AtCmdFwdService</instance>
- </interface>
- </hal>
-</manifest>
diff --git a/fstab.hardware b/fstab.hardware
deleted file mode 100644
index f111269..0000000
--- a/fstab.hardware
+++ /dev/null
@@ -1,10 +0,0 @@
-# Android fstab file.
-
-#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
-/dev/block/bootdevice/by-name/system / ext4 ro,barrier=1,discard wait,slotselect,avb
-/dev/block/by-name/metadata /metadata ext4 noatime,nosuid,nodev,discard,sync wait,formattable,first_stage_mount
-/dev/block/bootdevice/by-name/modem /vendor/firmware_mnt vfat ro,shortname=lower,uid=0,gid=1000,dmask=227,fmask=337,context=u:object_r:firmware_file:s0 wait,slotselect
-/dev/block/bootdevice/by-name/misc /misc emmc defaults defaults
-/dev/block/bootdevice/by-name/userdata /data f2fs noatime,nosuid,nodev,discard,reserve_root=32768,resgid=1065,fsync_mode=nobarrier latemount,wait,check,quota,formattable,reservedsize=128M,sysfs_path=/sys/devices/platform/soc/1d84000.ufshc,checkpoint=fs
-/devices/platform/soc/a600000.ssusb/a600000.dwc3* auto vfat defaults voldmanaged=usb:auto
-/dev/block/zram0 none swap defaults zramsize=2147483648,max_comp_streams=8,zram_loopback_path=/data/unencrypted/zram_swap,zram_loopback_size=512M
diff --git a/fstab.persist b/fstab.persist
deleted file mode 100644
index f3840b1..0000000
--- a/fstab.persist
+++ /dev/null
@@ -1,4 +0,0 @@
-# Keep persist in an fstab file, since we need to run fsck on it after abnormal shutdown.
-
-#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
-/dev/block/platform/soc/1d84000.ufshc/by-name/persist /mnt/vendor/persist ext4 nosuid,nodev,noatime,barrier=1 wait
diff --git a/fstab.postinstall b/fstab.postinstall
deleted file mode 100644
index 83bb3c6..0000000
--- a/fstab.postinstall
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
-system /postinstall ext4 ro,nosuid,nodev,noexec slotselect_other,logical,avb_keys=/product/etc/security/avb/system_other.avbpubkey
diff --git a/gps.conf b/gps.conf
deleted file mode 100644
index 9f5a702..0000000
--- a/gps.conf
+++ /dev/null
@@ -1,297 +0,0 @@
-#Version check for XTRA
-#DISABLE = 0
-#AUTO = 1
-#XTRA2 = 2
-#XTRA3 = 3
-XTRA_VERSION_CHECK=0
-
-# Error Estimate
-# _SET = 1
-# _CLEAR = 0
-ERR_ESTIMATE=0
-
-#NTP server
-#NTP_SERVER setting is in modem NV
-
-#XTRA CA path
-XTRA_CA_PATH=/system/etc/security/cacerts
-
-# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
-# 4 - Debug, 5 - Verbose
-# If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 2
-
-# Intermediate position report, 1=enable, 0=disable
-INTERMEDIATE_POS=0
-
-# Below bit mask configures how GPS functionalities
-# should be locked when user turns off GPS on Settings
-# Set bit 0x1 if MO GPS functionalities are to be locked
-# Set bit 0x2 if NI GPS functionalities are to be locked
-# default – both MO and NI locked for maximal privacy
-#GPS_LOCK = 3
-
-# supl version 1.0
-#SUPL_VER=0x10000
-
-# Emergency SUPL, 1=enable, 0=disable
-SUPL_ES=1
-
-#Choose PDN for Emergency SUPL
-#1 - Use emergency PDN
-#0 - Use regular SUPL PDN for Emergency SUPL
-#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
-
-#SUPL_MODE is a bit mask set in config.xml per carrier by default.
-#If it is uncommented here, this value will overwrite the value from
-#config.xml.
-#MSA=0X2
-#MSB=0X1
-#SUPL_MODE=
-
-# GPS Capabilities bit mask
-# SCHEDULING = 0x01
-# MSB = 0x02
-# MSA = 0x04
-# ON_DEMAND_TIME = 0x10
-# GEOFENCE = 0x20
-# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
-CAPABILITIES=0x37
-
-# Accuracy threshold for intermediate positions
-# less accurate positions are ignored, 0 for passing all positions
-# ACCURACY_THRES=5000
-
-################################
-##### AGPS server settings #####
-################################
-
-# FOR SUPL SUPPORT, set the following
-# SUPL_HOST=supl.host.com or IP
-# SUPL_PORT=1234
-
-# FOR MO SUPL SUPPORT, set the following
-# MO_SUPL_HOST=supl.host.com or IP
-# MO_SUPL_PORT=1234
-
-# FOR C2K PDE SUPPORT, set the following
-# C2K_HOST=c2k.pde.com or IP
-# C2K_PORT=1234
-
-# Bitmask of slots that are available
-# for write/install to, where 1s indicate writable,
-# and the default value is 0 where no slots
-# are writable. For example, AGPS_CERT_WRITABLE_MASK
-# of b1000001010 makes 3 slots available
-# and the remaining 7 slots unwritable.
-#AGPS_CERT_WRITABLE_MASK=0
-
-####################################
-# LTE Positioning Profile Settings
-####################################
-# 0: Enable RRLP on LTE(Default)
-# 1: Enable LPP_User_Plane on LTE
-# 2: Enable LPP_Control_Plane
-# 3: Enable both LPP_User_Plane and LPP_Control_Plane
-#LPP_PROFILE = 2
-
-####################################
-#Datum Type
-####################################
-# 0: WGS-84
-# 1: PZ-90
-DATUM_TYPE = 0
-
-################################
-# EXTRA SETTINGS
-################################
-# NMEA provider (1=Modem Processor, 0=Application Processor)
-NMEA_PROVIDER=0
-# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
-SGLTE_TARGET=0
-
-##################################################
-# Select Positioning Protocol on A-GLONASS system
-##################################################
-# 0x1: RRC CPlane
-# 0x2: RRLP UPlane
-# 0x4: LLP Uplane
-#A_GLONASS_POS_PROTOCOL_SELECT = 0
-
-##################################################
-# Select technology for LPPe Control Plane
-##################################################
-# 0x1: DBH for LPPe CP
-# 0x2: WLAN AP Measurements for LPPe CP
-# 0x4: SRN AP measurement for CP
-# 0x8: Sensor Barometer Measurement LPPe CP
-#LPPE_CP_TECHNOLOGY = 0
-
-##################################################
-# Select technology for LPPe User Plane
-##################################################
-# 0x1: DBH for LPPe UP
-# 0x2: WLAN AP Measurements for LPPe UP
-# 0x4: SRN AP measurement for UP
-# 0x8: Sensor Barometer Measurement LPPe UP
-#LPPE_UP_TECHNOLOGY = 0
-
-##################################################
-# AGPS_CONFIG_INJECT
-##################################################
-# enable/disable injection of AGPS configurations:
-# SUPL_VER
-# SUPL_HOST
-# SUPL_PORT
-# MO_SUPL_HOST
-# MO_SUPL_PORT
-# C2K_HOST
-# C2K_PORT
-# LPP_PROFILE
-# A_GLONASS_POS_PROTOCOL_SELECT
-# 0: disable
-# 1: enable
-AGPS_CONFIG_INJECT = 1
-
-##################################################
-# GNSS settings for automotive use cases
-# Configurations in following section are
-# specific to automotive use cases, others
-# please do not change, keep the default values
-##################################################
-
-# AP Coarse Timestamp Uncertainty
-##################################################
-# default : 10
-# AP time stamp uncertainty, until GNSS receiver
-# is able to acquire better timing information
-AP_TIMESTAMP_UNCERTAINTY = 10
-
-##################################################
-# QDR engine availability status
-##################################################
-# 0 : NO QDR (default)
-# 1 : QDR enabled
-# This settings enables QDR Configuration for
-# automotive use case, if enabled then
-# DR_AP_Service needs to be enabled in izat.conf
-#EXTERNAL_DR_ENABLED = 0
-
-#####################################
-# DR_SYNC Pulse Availability
-#####################################
-# 0 : DR_SYNC pulse not available (default)
-# 1 : DR_SYNC pulse available
-# This configuration enables the driver to make use
-# of PPS events generated by DR_SYNC pulse
-# Standard Linux PPS driver needs to be enabled
-DR_SYNC_ENABLED = 0
-
-#####################################
-# PPS Device name
-#####################################
-PPS_DEVICENAME = /dev/pps0
-
-#####################################
-# Ignore PPS at Startup and after long outage
-#####################################
-IGNORE_PPS_PULSE_COUNT = 1
-
-#####################################
-# Long GNSS RF outage in seconds
-#####################################
-GNSS_OUTAGE_DURATION = 10
-
-#####################################
-# AP Clock Accuracy
-#####################################
-# Quality of APPS processor clock (in PPM).
-# Value specified is used for calculation of
-# APPS time stamp uncertainty
-AP_CLOCK_PPM = 100
-
-#####################################
-# MAX ms difference to detect missing pulse
-#####################################
-# Specifies time threshold in ms to validate any missing PPS pulses
-MISSING_PULSE_TIME_DELTA = 900
-
-#####################################
-# Propagation time uncertainty
-#####################################
-# This settings enables time uncertainty propagation
-# logic incase of missing PPS pulse
-PROPAGATION_TIME_UNCERTAINTY = 1
-
-#######################################
-# APN / IP Type Configuration
-# APN and IP Type to use for setting
-# up WWAN call.
-# Use below values for IP Type:
-# v4 = 4
-# v6 = 6
-# v4v6 = 10
-#######################################
-# INTERNET_APN = abc.xyz
-# INTERNET_IP_TYPE = 4
-# SUPL_APN = abc.xyz
-# SUPL_IP_TYPE = 4
-
-#####################################
-# Modem type
-#####################################
-# This setting configures modem type
-# (external=0 or internal=1)
-# comment out the next line to vote
-# for the first modem in the list
-MODEM_TYPE = 0
-
-##################################################
-# CONSTRAINED TIME UNCERTAINTY MODE
-##################################################
-# 0 : disabled (default)
-# 1 : enabled
-# This setting enables GPS engine to keep its time
-# uncertainty below the specified constraint
-#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
-
-# If constrained time uncertainty mode is enabled,
-# this setting specifies the time uncertainty
-# threshold that gps engine need to maintain.
-# In unit of milli-seconds.
-# Default is 0.0 meaning that modem default value
-# of time uncertainty threshold will be used.
-#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
-
-# If constrained time uncertainty mode is enabled,
-# this setting specifies the power budget that
-# gps engine is allowed to spend to maintain the time
-# uncertainty.
-# Default is 0 meaning that GPS engine is not constained
-# by power budget and can spend as much power as needed.
-# In unit of 0.1 milli watt second.
-#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
-
-##################################################
-# POSITION ASSISTED CLOCK ESTIMATOR
-##################################################
-# 0 : disabled (default)
-# 1 : enabled
-# This setting enables GPS engine to estimate clock
-# bias and drift when the signal from at least 1
-# SV is available and the UEÂ’s position is known by
-# other position engines.
-#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
-
-#####################################
-# proxyAppPackageName
-#####################################
-# This is a string that is sent to the framework
-# in nfwNotifyCb callback
-PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation
-
-#####################################
-# CP_MTLR_ES
-#####################################
-# CP MTLR ES, 1=enable, 0=disable
-CP_MTLR_ES=1
diff --git a/gpt-utils/Android.mk b/gpt-utils/Android.mk
deleted file mode 100644
index 6dd1a44..0000000
--- a/gpt-utils/Android.mk
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# Copyright 2016 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-LOCAL_SRC_FILES := gpt-utils.cpp
-ifeq ($(TARGET_COMPILE_WITH_MSM_KERNEL),true)
-LOCAL_C_INCLUDES += $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr/include
-LOCAL_ADDITIONAL_DEPENDENCIES := $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr
-endif
-LOCAL_SHARED_LIBRARIES := liblog libz
-LOCAL_MODULE := libgptutils
-LOCAL_MODULE_OWNER := qti
-include $(BUILD_STATIC_LIBRARY)
-
-include $(CLEAR_VARS)
-LOCAL_SRC_FILES := gpt-utils.cpp
-ifeq ($(TARGET_COMPILE_WITH_MSM_KERNEL),true)
-LOCAL_C_INCLUDES += $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr/include
-LOCAL_ADDITIONAL_DEPENDENCIES := $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr
-endif
-LOCAL_SHARED_LIBRARIES += liblog libcutils libz
-LOCAL_EXPORT_HEADER_LIBRARY_HEADERS := libgptutils_headers
-LOCAL_MODULE := libgptutils
-LOCAL_MODULE_OWNER := qti
-LOCAL_PROPRIETARY_MODULE := true
-include $(BUILD_SHARED_LIBRARY)
-
-include $(CLEAR_VARS)
-LOCAL_MODULE := libgptutils_headers
-LOCAL_EXPORT_C_INCLUDE_DIRS:=$(LOCAL_PATH)
-include $(BUILD_HEADER_LIBRARY)
diff --git a/gpt-utils/gpt-utils.cpp b/gpt-utils/gpt-utils.cpp
deleted file mode 100644
index 8636c40..0000000
--- a/gpt-utils/gpt-utils.cpp
+++ /dev/null
@@ -1,1542 +0,0 @@
-/*
- * Copyright (c) 2013, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define _LARGEFILE64_SOURCE /* enable lseek64() */
-
-/******************************************************************************
- * INCLUDE SECTION
- ******************************************************************************/
-#include <stdio.h>
-#include <fcntl.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <scsi/ufs/ioctl.h>
-#include <scsi/ufs/ufs.h>
-#include <unistd.h>
-#include <linux/fs.h>
-#include <limits.h>
-#include <dirent.h>
-#include <inttypes.h>
-#include <linux/kernel.h>
-#include <asm/byteorder.h>
-#include <map>
-#include <vector>
-#include <string>
-#define LOG_TAG "gpt-utils"
-#include <cutils/log.h>
-#include <cutils/properties.h>
-#include "gpt-utils.h"
-#include <endian.h>
-#include <zlib.h>
-
-
-/******************************************************************************
- * DEFINE SECTION
- ******************************************************************************/
-#define BLK_DEV_FILE "/dev/block/mmcblk0"
-/* list the names of the backed-up partitions to be swapped */
-/* extension used for the backup partitions - tzbak, abootbak, etc. */
-#define BAK_PTN_NAME_EXT "bak"
-#define XBL_PRIMARY "/dev/block/platform/soc/1d84000.ufshc/by-name/xbl"
-#define XBL_BACKUP "/dev/block/platform/soc/1d84000.ufshc/by-name/xblbak"
-#define XBL_AB_PRIMARY "/dev/block/platform/soc/1d84000.ufshc/by-name/xbl_a"
-#define XBL_AB_SECONDARY "/dev/block/platform/soc/1d84000.ufshc/by-name/xbl_b"
-/* GPT defines */
-#define MAX_LUNS 26
-//Size of the buffer that needs to be passed to the UFS ioctl
-#define UFS_ATTR_DATA_SIZE 32
-//This will allow us to get the root lun path from the path to the partition.
-//i.e: from /dev/block/sdaXXX get /dev/block/sda. The assumption here is that
-//the boot critical luns lie between sda to sdz which is acceptable because
-//only user added external disks,etc would lie beyond that limit which do not
-//contain partitions that interest us here.
-#define PATH_TRUNCATE_LOC (sizeof("/dev/block/sda") - 1)
-
-//From /dev/block/sda get just sda
-#define LUN_NAME_START_LOC (sizeof("/dev/block/") - 1)
-#define BOOT_LUN_A_ID 1
-#define BOOT_LUN_B_ID 2
-/******************************************************************************
- * MACROS
- ******************************************************************************/
-
-
-#define GET_4_BYTES(ptr) ((uint32_t) *((uint8_t *)(ptr)) | \
- ((uint32_t) *((uint8_t *)(ptr) + 1) << 8) | \
- ((uint32_t) *((uint8_t *)(ptr) + 2) << 16) | \
- ((uint32_t) *((uint8_t *)(ptr) + 3) << 24))
-
-#define GET_8_BYTES(ptr) ((uint64_t) *((uint8_t *)(ptr)) | \
- ((uint64_t) *((uint8_t *)(ptr) + 1) << 8) | \
- ((uint64_t) *((uint8_t *)(ptr) + 2) << 16) | \
- ((uint64_t) *((uint8_t *)(ptr) + 3) << 24) | \
- ((uint64_t) *((uint8_t *)(ptr) + 4) << 32) | \
- ((uint64_t) *((uint8_t *)(ptr) + 5) << 40) | \
- ((uint64_t) *((uint8_t *)(ptr) + 6) << 48) | \
- ((uint64_t) *((uint8_t *)(ptr) + 7) << 56))
-
-#define PUT_4_BYTES(ptr, y) *((uint8_t *)(ptr)) = (y) & 0xff; \
- *((uint8_t *)(ptr) + 1) = ((y) >> 8) & 0xff; \
- *((uint8_t *)(ptr) + 2) = ((y) >> 16) & 0xff; \
- *((uint8_t *)(ptr) + 3) = ((y) >> 24) & 0xff;
-
-/******************************************************************************
- * TYPES
- ******************************************************************************/
-using namespace std;
-enum gpt_state {
- GPT_OK = 0,
- GPT_BAD_SIGNATURE,
- GPT_BAD_CRC
-};
-//List of LUN's containing boot critical images.
-//Required in the case of UFS devices
-struct update_data {
- char lun_list[MAX_LUNS][PATH_MAX];
- uint32_t num_valid_entries;
-};
-
-/******************************************************************************
- * FUNCTIONS
- ******************************************************************************/
-/**
- * ==========================================================================
- *
- * \brief Read/Write len bytes from/to block dev
- *
- * \param [in] fd block dev file descriptor (returned from open)
- * \param [in] rw RW flag: 0 - read, != 0 - write
- * \param [in] offset block dev offset [bytes] - RW start position
- * \param [in] buf Pointer to the buffer containing the data
- * \param [in] len RW size in bytes. Buf must be at least that big
- *
- * \return 0 on success
- *
- * ==========================================================================
- */
-static int blk_rw(int fd, int rw, int64_t offset, uint8_t *buf, unsigned len)
-{
- int r;
-
- if (lseek64(fd, offset, SEEK_SET) < 0) {
- fprintf(stderr, "block dev lseek64 %" PRIi64 " failed: %s\n", offset,
- strerror(errno));
- return -1;
- }
-
- if (rw)
- r = write(fd, buf, len);
- else
- r = read(fd, buf, len);
-
- if (r < 0)
- fprintf(stderr, "block dev %s failed: %s\n", rw ? "write" : "read",
- strerror(errno));
- else
- r = 0;
-
- return r;
-}
-
-
-
-/**
- * ==========================================================================
- *
- * \brief Search within GPT for partition entry with the given name
- * or it's backup twin (name-bak).
- *
- * \param [in] ptn_name Partition name to seek
- * \param [in] pentries_start Partition entries array start pointer
- * \param [in] pentries_end Partition entries array end pointer
- * \param [in] pentry_size Single partition entry size [bytes]
- *
- * \return First partition entry pointer that matches the name or NULL
- *
- * ==========================================================================
- */
-static uint8_t *gpt_pentry_seek(const char *ptn_name,
- const uint8_t *pentries_start,
- const uint8_t *pentries_end,
- uint32_t pentry_size)
-{
- char *pentry_name;
- unsigned len = strlen(ptn_name);
-
- for (pentry_name = (char *) (pentries_start + PARTITION_NAME_OFFSET);
- pentry_name < (char *) pentries_end; pentry_name += pentry_size) {
- char name8[MAX_GPT_NAME_SIZE / 2];
- unsigned i;
-
- /* Partition names in GPT are UTF-16 - ignoring UTF-16 2nd byte */
- for (i = 0; i < sizeof(name8); i++)
- name8[i] = pentry_name[i * 2];
- if (!strncmp(ptn_name, name8, len))
- if (name8[len] == 0 || !strcmp(&name8[len], BAK_PTN_NAME_EXT))
- return (uint8_t *) (pentry_name - PARTITION_NAME_OFFSET);
- }
-
- return NULL;
-}
-
-
-
-/**
- * ==========================================================================
- *
- * \brief Swaps boot chain in GPT partition entries array
- *
- * \param [in] pentries_start Partition entries array start
- * \param [in] pentries_end Partition entries array end
- * \param [in] pentry_size Single partition entry size
- *
- * \return 0 on success, 1 if no backup partitions found
- *
- * ==========================================================================
- */
-static int gpt_boot_chain_swap(const uint8_t *pentries_start,
- const uint8_t *pentries_end,
- uint32_t pentry_size)
-{
- const char ptn_swap_list[][MAX_GPT_NAME_SIZE] = { PTN_SWAP_LIST };
-
- int backup_not_found = 1;
- unsigned i;
-
- for (i = 0; i < ARRAY_SIZE(ptn_swap_list); i++) {
- uint8_t *ptn_entry;
- uint8_t *ptn_bak_entry;
- uint8_t ptn_swap[PTN_ENTRY_SIZE];
- //Skip the xbl partition on UFS devices. That is handled
- //seperately.
- if (gpt_utils_is_ufs_device() && !strncmp(ptn_swap_list[i],
- PTN_XBL,
- strlen(PTN_XBL)))
- continue;
-
- ptn_entry = gpt_pentry_seek(ptn_swap_list[i], pentries_start,
- pentries_end, pentry_size);
- if (ptn_entry == NULL)
- continue;
-
- ptn_bak_entry = gpt_pentry_seek(ptn_swap_list[i],
- ptn_entry + pentry_size, pentries_end, pentry_size);
- if (ptn_bak_entry == NULL) {
- fprintf(stderr, "'%s' partition not backup - skip safe update\n",
- ptn_swap_list[i]);
- continue;
- }
-
- /* swap primary <-> backup partition entries */
- memcpy(ptn_swap, ptn_entry, PTN_ENTRY_SIZE);
- memcpy(ptn_entry, ptn_bak_entry, PTN_ENTRY_SIZE);
- memcpy(ptn_bak_entry, ptn_swap, PTN_ENTRY_SIZE);
- backup_not_found = 0;
- }
-
- return backup_not_found;
-}
-
-
-
-/**
- * ==========================================================================
- *
- * \brief Sets secondary GPT boot chain
- *
- * \param [in] fd block dev file descriptor
- * \param [in] boot Boot chain to switch to
- *
- * \return 0 on success
- *
- * ==========================================================================
- */
-static int gpt2_set_boot_chain(int fd, enum boot_chain boot)
-{
- int64_t gpt2_header_offset;
- uint64_t pentries_start_offset;
- uint32_t gpt_header_size;
- uint32_t pentry_size;
- uint32_t pentries_array_size;
-
- uint8_t *gpt_header = NULL;
- uint8_t *pentries = NULL;
- uint32_t crc;
- uint32_t blk_size = 0;
- int r;
-
- if (ioctl(fd, BLKSSZGET, &blk_size) != 0) {
- fprintf(stderr, "Failed to get GPT device block size: %s\n",
- strerror(errno));
- r = -1;
- goto EXIT;
- }
- gpt_header = (uint8_t*)malloc(blk_size);
- if (!gpt_header) {
- fprintf(stderr, "Failed to allocate memory to hold GPT block\n");
- r = -1;
- goto EXIT;
- }
- gpt2_header_offset = lseek64(fd, 0, SEEK_END) - blk_size;
- if (gpt2_header_offset < 0) {
- fprintf(stderr, "Getting secondary GPT header offset failed: %s\n",
- strerror(errno));
- r = -1;
- goto EXIT;
- }
-
- /* Read primary GPT header from block dev */
- r = blk_rw(fd, 0, blk_size, gpt_header, blk_size);
-
- if (r) {
- fprintf(stderr, "Failed to read primary GPT header from blk dev\n");
- goto EXIT;
- }
- pentries_start_offset =
- GET_8_BYTES(gpt_header + PENTRIES_OFFSET) * blk_size;
- pentry_size = GET_4_BYTES(gpt_header + PENTRY_SIZE_OFFSET);
- pentries_array_size =
- GET_4_BYTES(gpt_header + PARTITION_COUNT_OFFSET) * pentry_size;
-
- pentries = (uint8_t *) calloc(1, pentries_array_size);
- if (pentries == NULL) {
- fprintf(stderr,
- "Failed to alloc memory for GPT partition entries array\n");
- r = -1;
- goto EXIT;
- }
- /* Read primary GPT partititon entries array from block dev */
- r = blk_rw(fd, 0, pentries_start_offset, pentries, pentries_array_size);
- if (r)
- goto EXIT;
-
- crc = crc32(0, pentries, pentries_array_size);
- if (GET_4_BYTES(gpt_header + PARTITION_CRC_OFFSET) != crc) {
- fprintf(stderr, "Primary GPT partition entries array CRC invalid\n");
- r = -1;
- goto EXIT;
- }
-
- /* Read secondary GPT header from block dev */
- r = blk_rw(fd, 0, gpt2_header_offset, gpt_header, blk_size);
- if (r)
- goto EXIT;
-
- gpt_header_size = GET_4_BYTES(gpt_header + HEADER_SIZE_OFFSET);
- pentries_start_offset =
- GET_8_BYTES(gpt_header + PENTRIES_OFFSET) * blk_size;
-
- if (boot == BACKUP_BOOT) {
- r = gpt_boot_chain_swap(pentries, pentries + pentries_array_size,
- pentry_size);
- if (r)
- goto EXIT;
- }
-
- crc = crc32(0, pentries, pentries_array_size);
- PUT_4_BYTES(gpt_header + PARTITION_CRC_OFFSET, crc);
-
- /* header CRC is calculated with this field cleared */
- PUT_4_BYTES(gpt_header + HEADER_CRC_OFFSET, 0);
- crc = crc32(0, gpt_header, gpt_header_size);
- PUT_4_BYTES(gpt_header + HEADER_CRC_OFFSET, crc);
-
- /* Write the modified GPT header back to block dev */
- r = blk_rw(fd, 1, gpt2_header_offset, gpt_header, blk_size);
- if (!r)
- /* Write the modified GPT partititon entries array back to block dev */
- r = blk_rw(fd, 1, pentries_start_offset, pentries,
- pentries_array_size);
-
-EXIT:
- if(gpt_header)
- free(gpt_header);
- if (pentries)
- free(pentries);
- return r;
-}
-
-/**
- * ==========================================================================
- *
- * \brief Checks GPT state (header signature and CRC)
- *
- * \param [in] fd block dev file descriptor
- * \param [in] gpt GPT header to be checked
- * \param [out] state GPT header state
- *
- * \return 0 on success
- *
- * ==========================================================================
- */
-static int gpt_get_state(int fd, enum gpt_instance gpt, enum gpt_state *state)
-{
- int64_t gpt_header_offset;
- uint32_t gpt_header_size;
- uint8_t *gpt_header = NULL;
- uint32_t crc;
- uint32_t blk_size = 0;
-
- *state = GPT_OK;
-
- if (ioctl(fd, BLKSSZGET, &blk_size) != 0) {
- fprintf(stderr, "Failed to get GPT device block size: %s\n",
- strerror(errno));
- goto error;
- }
- gpt_header = (uint8_t*)malloc(blk_size);
- if (!gpt_header) {
- fprintf(stderr, "gpt_get_state:Failed to alloc memory for header\n");
- goto error;
- }
- if (gpt == PRIMARY_GPT)
- gpt_header_offset = blk_size;
- else {
- gpt_header_offset = lseek64(fd, 0, SEEK_END) - blk_size;
- if (gpt_header_offset < 0) {
- fprintf(stderr, "gpt_get_state:Seek to end of GPT part fail\n");
- goto error;
- }
- }
-
- if (blk_rw(fd, 0, gpt_header_offset, gpt_header, blk_size)) {
- fprintf(stderr, "gpt_get_state: blk_rw failed\n");
- goto error;
- }
- if (memcmp(gpt_header, GPT_SIGNATURE, sizeof(GPT_SIGNATURE)))
- *state = GPT_BAD_SIGNATURE;
- gpt_header_size = GET_4_BYTES(gpt_header + HEADER_SIZE_OFFSET);
-
- crc = GET_4_BYTES(gpt_header + HEADER_CRC_OFFSET);
- /* header CRC is calculated with this field cleared */
- PUT_4_BYTES(gpt_header + HEADER_CRC_OFFSET, 0);
- if (crc32(0, gpt_header, gpt_header_size) != crc)
- *state = GPT_BAD_CRC;
- free(gpt_header);
- return 0;
-error:
- if (gpt_header)
- free(gpt_header);
- return -1;
-}
-
-
-
-/**
- * ==========================================================================
- *
- * \brief Sets GPT header state (used to corrupt and fix GPT signature)
- *
- * \param [in] fd block dev file descriptor
- * \param [in] gpt GPT header to be checked
- * \param [in] state GPT header state to set (GPT_OK or GPT_BAD_SIGNATURE)
- *
- * \return 0 on success
- *
- * ==========================================================================
- */
-static int gpt_set_state(int fd, enum gpt_instance gpt, enum gpt_state state)
-{
- int64_t gpt_header_offset;
- uint32_t gpt_header_size;
- uint8_t *gpt_header = NULL;
- uint32_t crc;
- uint32_t blk_size = 0;
-
- if (ioctl(fd, BLKSSZGET, &blk_size) != 0) {
- fprintf(stderr, "Failed to get GPT device block size: %s\n",
- strerror(errno));
- goto error;
- }
- gpt_header = (uint8_t*)malloc(blk_size);
- if (!gpt_header) {
- fprintf(stderr, "Failed to alloc memory for gpt header\n");
- goto error;
- }
- if (gpt == PRIMARY_GPT)
- gpt_header_offset = blk_size;
- else {
- gpt_header_offset = lseek64(fd, 0, SEEK_END) - blk_size;
- if (gpt_header_offset < 0) {
- fprintf(stderr, "Failed to seek to end of GPT device\n");
- goto error;
- }
- }
- if (blk_rw(fd, 0, gpt_header_offset, gpt_header, blk_size)) {
- fprintf(stderr, "Failed to r/w gpt header\n");
- goto error;
- }
- if (state == GPT_OK)
- memcpy(gpt_header, GPT_SIGNATURE, sizeof(GPT_SIGNATURE));
- else if (state == GPT_BAD_SIGNATURE)
- *gpt_header = 0;
- else {
- fprintf(stderr, "gpt_set_state: Invalid state\n");
- goto error;
- }
-
- gpt_header_size = GET_4_BYTES(gpt_header + HEADER_SIZE_OFFSET);
-
- /* header CRC is calculated with this field cleared */
- PUT_4_BYTES(gpt_header + HEADER_CRC_OFFSET, 0);
- crc = crc32(0, gpt_header, gpt_header_size);
- PUT_4_BYTES(gpt_header + HEADER_CRC_OFFSET, crc);
-
- if (blk_rw(fd, 1, gpt_header_offset, gpt_header, blk_size)) {
- fprintf(stderr, "gpt_set_state: blk write failed\n");
- goto error;
- }
- return 0;
-error:
- if(gpt_header)
- free(gpt_header);
- return -1;
-}
-
-int get_scsi_node_from_bootdevice(const char *bootdev_path,
- char *sg_node_path,
- size_t buf_size)
-{
- char sg_dir_path[PATH_MAX] = {0};
- char real_path[PATH_MAX] = {0};
- DIR *scsi_dir = NULL;
- struct dirent *de;
- int node_found = 0;
- if (!bootdev_path || !sg_node_path) {
- fprintf(stderr, "%s : invalid argument\n",
- __func__);
- goto error;
- }
- if (readlink(bootdev_path, real_path, sizeof(real_path) - 1) < 0) {
- fprintf(stderr, "failed to resolve link for %s(%s)\n",
- bootdev_path,
- strerror(errno));
- goto error;
- }
- if(strlen(real_path) < PATH_TRUNCATE_LOC + 1){
- fprintf(stderr, "Unrecognized path :%s:\n",
- real_path);
- goto error;
- }
- //For the safe side in case there are additional partitions on
- //the XBL lun we truncate the name.
- real_path[PATH_TRUNCATE_LOC] = '\0';
- if(strlen(real_path) < LUN_NAME_START_LOC + 1){
- fprintf(stderr, "Unrecognized truncated path :%s:\n",
- real_path);
- goto error;
- }
- //This will give us /dev/block/sdb/device/scsi_generic
- //which contains a file sgY whose name gives us the path
- //to /dev/sgY which we return
- snprintf(sg_dir_path, sizeof(sg_dir_path) - 1,
- "/sys/block/%s/device/scsi_generic",
- &real_path[LUN_NAME_START_LOC]);
- scsi_dir = opendir(sg_dir_path);
- if (!scsi_dir) {
- fprintf(stderr, "%s : Failed to open %s(%s)\n",
- __func__,
- sg_dir_path,
- strerror(errno));
- goto error;
- }
- while((de = readdir(scsi_dir))) {
- if (de->d_name[0] == '.')
- continue;
- else if (!strncmp(de->d_name, "sg", 2)) {
- snprintf(sg_node_path,
- buf_size -1,
- "/dev/%s",
- de->d_name);
- fprintf(stderr, "%s:scsi generic node is :%s:\n",
- __func__,
- sg_node_path);
- node_found = 1;
- break;
- }
- }
- if(!node_found) {
- fprintf(stderr,"%s: Unable to locate scsi generic node\n",
- __func__);
- goto error;
- }
- closedir(scsi_dir);
- return 0;
-error:
- if (scsi_dir)
- closedir(scsi_dir);
- return -1;
-}
-
-int set_boot_lun(char *sg_dev, uint8_t boot_lun_id)
-{
- int fd = -1;
- int rc;
- struct ufs_ioctl_query_data *data = NULL;
- size_t ioctl_data_size = sizeof(struct ufs_ioctl_query_data) + UFS_ATTR_DATA_SIZE;
-
- data = (struct ufs_ioctl_query_data*)malloc(ioctl_data_size);
- if (!data) {
- fprintf(stderr, "%s: Failed to alloc query data struct\n",
- __func__);
- goto error;
- }
- memset(data, 0, ioctl_data_size);
- data->opcode = UPIU_QUERY_OPCODE_WRITE_ATTR;
- data->idn = QUERY_ATTR_IDN_BOOT_LU_EN;
- data->buf_size = UFS_ATTR_DATA_SIZE;
- data->buffer[0] = boot_lun_id;
- fd = open(sg_dev, O_RDWR);
- if (fd < 0) {
- fprintf(stderr, "%s: Failed to open %s(%s)\n",
- __func__,
- sg_dev,
- strerror(errno));
- goto error;
- }
- rc = ioctl(fd, UFS_IOCTL_QUERY, data);
- if (rc) {
- fprintf(stderr, "%s: UFS query ioctl failed(%s)\n",
- __func__,
- strerror(errno));
- goto error;
- }
- close(fd);
- free(data);
- return 0;
-error:
- if (fd >= 0)
- close(fd);
- if (data)
- free(data);
- return -1;
-}
-
-//Swtich betwieen using either the primary or the backup
-//boot LUN for boot. This is required since UFS boot partitions
-//cannot have a backup GPT which is what we use for failsafe
-//updates of the other 'critical' partitions. This function will
-//not be invoked for emmc targets and on UFS targets is only required
-//to be invoked for XBL.
-//
-//The algorithm to do this is as follows:
-//- Find the real block device(eg: /dev/block/sdb) that corresponds
-// to the /dev/block/bootdevice/by-name/xbl(bak) symlink
-//
-//- Once we have the block device 'node' name(sdb in the above example)
-// use this node to to locate the scsi generic device that represents
-// it by checking the file /sys/block/sdb/device/scsi_generic/sgY
-//
-//- Once we locate sgY we call the query ioctl on /dev/sgy to switch
-//the boot lun to either LUNA or LUNB
-int gpt_utils_set_xbl_boot_partition(enum boot_chain chain)
-{
- struct stat st;
- ///sys/block/sdX/device/scsi_generic/
- char sg_dev_node[PATH_MAX] = {0};
- uint8_t boot_lun_id = 0;
- const char *boot_dev = NULL;
-
- if (chain == BACKUP_BOOT) {
- boot_lun_id = BOOT_LUN_B_ID;
- if (!stat(XBL_BACKUP, &st))
- boot_dev = XBL_BACKUP;
- else if (!stat(XBL_AB_SECONDARY, &st))
- boot_dev = XBL_AB_SECONDARY;
- else {
- fprintf(stderr, "%s: Failed to locate secondary xbl\n",
- __func__);
- goto error;
- }
- } else if (chain == NORMAL_BOOT) {
- boot_lun_id = BOOT_LUN_A_ID;
- if (!stat(XBL_PRIMARY, &st))
- boot_dev = XBL_PRIMARY;
- else if (!stat(XBL_AB_PRIMARY, &st))
- boot_dev = XBL_AB_PRIMARY;
- else {
- fprintf(stderr, "%s: Failed to locate primary xbl\n",
- __func__);
- goto error;
- }
- } else {
- fprintf(stderr, "%s: Invalid boot chain id\n", __func__);
- goto error;
- }
- //We need either both xbl and xblbak or both xbl_a and xbl_b to exist at
- //the same time. If not the current configuration is invalid.
- if((stat(XBL_PRIMARY, &st) ||
- stat(XBL_BACKUP, &st)) &&
- (stat(XBL_AB_PRIMARY, &st) ||
- stat(XBL_AB_SECONDARY, &st))) {
- fprintf(stderr, "%s:primary/secondary XBL prt not found(%s)\n",
- __func__,
- strerror(errno));
- goto error;
- }
- fprintf(stderr, "%s: setting %s lun as boot lun\n",
- __func__,
- boot_dev);
- if (get_scsi_node_from_bootdevice(boot_dev,
- sg_dev_node,
- sizeof(sg_dev_node))) {
- fprintf(stderr, "%s: Failed to get scsi node path for xblbak\n",
- __func__);
- goto error;
- }
- if (set_boot_lun(sg_dev_node, boot_lun_id)) {
- fprintf(stderr, "%s: Failed to set xblbak as boot partition\n",
- __func__);
- goto error;
- }
- return 0;
-error:
- return -1;
-}
-
-int gpt_utils_is_ufs_device()
-{
- char bootdevice[PROPERTY_VALUE_MAX] = {0};
- property_get("ro.boot.bootdevice", bootdevice, "N/A");
- if (strlen(bootdevice) < strlen(".ufshc") + 1)
- return 0;
- return (!strncmp(&bootdevice[strlen(bootdevice) - strlen(".ufshc")],
- ".ufshc",
- sizeof(".ufshc")));
-}
-//dev_path is the path to the block device that contains the GPT image that
-//needs to be updated. This would be the device which holds one or more critical
-//boot partitions and their backups. In the case of EMMC this function would
-//be invoked only once on /dev/block/mmcblk1 since it holds the GPT image
-//containing all the partitions For UFS devices it could potentially be
-//invoked multiple times, once for each LUN containing critical image(s) and
-//their backups
-int prepare_partitions(enum boot_update_stage stage, const char *dev_path)
-{
- int r = 0;
- int fd = -1;
- int is_ufs = gpt_utils_is_ufs_device();
- enum gpt_state gpt_prim, gpt_second;
- enum boot_update_stage internal_stage;
- struct stat xbl_partition_stat;
- struct stat ufs_dir_stat;
-
- if (!dev_path) {
- fprintf(stderr, "%s: Invalid dev_path\n",
- __func__);
- r = -1;
- goto EXIT;
- }
- fd = open(dev_path, O_RDWR);
- if (fd < 0) {
- fprintf(stderr, "%s: Opening '%s' failed: %s\n",
- __func__,
- BLK_DEV_FILE,
- strerror(errno));
- r = -1;
- goto EXIT;
- }
- r = gpt_get_state(fd, PRIMARY_GPT, &gpt_prim) ||
- gpt_get_state(fd, SECONDARY_GPT, &gpt_second);
- if (r) {
- fprintf(stderr, "%s: Getting GPT headers state failed\n",
- __func__);
- goto EXIT;
- }
-
- /* These 2 combinations are unexpected and unacceptable */
- if (gpt_prim == GPT_BAD_CRC || gpt_second == GPT_BAD_CRC) {
- fprintf(stderr, "%s: GPT headers CRC corruption detected, aborting\n",
- __func__);
- r = -1;
- goto EXIT;
- }
- if (gpt_prim == GPT_BAD_SIGNATURE && gpt_second == GPT_BAD_SIGNATURE) {
- fprintf(stderr, "%s: Both GPT headers corrupted, aborting\n",
- __func__);
- r = -1;
- goto EXIT;
- }
-
- /* Check internal update stage according GPT headers' state */
- if (gpt_prim == GPT_OK && gpt_second == GPT_OK)
- internal_stage = UPDATE_MAIN;
- else if (gpt_prim == GPT_BAD_SIGNATURE)
- internal_stage = UPDATE_BACKUP;
- else if (gpt_second == GPT_BAD_SIGNATURE)
- internal_stage = UPDATE_FINALIZE;
- else {
- fprintf(stderr, "%s: Abnormal GPTs state: primary (%d), secondary (%d), "
- "aborting\n", __func__, gpt_prim, gpt_second);
- r = -1;
- goto EXIT;
- }
-
- /* Stage already set - ready for update, exitting */
- if ((int) stage == (int) internal_stage - 1)
- goto EXIT;
- /* Unexpected stage given */
- if (stage != internal_stage) {
- r = -1;
- goto EXIT;
- }
-
- switch (stage) {
- case UPDATE_MAIN:
- if (is_ufs) {
- if(stat(XBL_PRIMARY, &xbl_partition_stat)||
- stat(XBL_BACKUP, &xbl_partition_stat)){
- //Non fatal error. Just means this target does not
- //use XBL but relies on sbl whose update is handled
- //by the normal methods.
- fprintf(stderr, "%s: xbl part not found(%s).Assuming sbl in use\n",
- __func__,
- strerror(errno));
- } else {
- //Switch the boot lun so that backup boot LUN is used
- r = gpt_utils_set_xbl_boot_partition(BACKUP_BOOT);
- if(r){
- fprintf(stderr, "%s: Failed to set xbl backup partition as boot\n",
- __func__);
- goto EXIT;
- }
- }
- }
- //Fix up the backup GPT table so that it actually points to
- //the backup copy of the boot critical images
- fprintf(stderr, "%s: Preparing for primary partition update\n",
- __func__);
- r = gpt2_set_boot_chain(fd, BACKUP_BOOT);
- if (r) {
- if (r < 0)
- fprintf(stderr,
- "%s: Setting secondary GPT to backup boot failed\n",
- __func__);
- /* No backup partitions - do not corrupt GPT, do not flag error */
- else
- r = 0;
- goto EXIT;
- }
- //corrupt the primary GPT so that the backup(which now points to
- //the backup boot partitions is used)
- r = gpt_set_state(fd, PRIMARY_GPT, GPT_BAD_SIGNATURE);
- if (r) {
- fprintf(stderr, "%s: Corrupting primary GPT header failed\n",
- __func__);
- goto EXIT;
- }
- break;
- case UPDATE_BACKUP:
- if (is_ufs) {
- if(stat(XBL_PRIMARY, &xbl_partition_stat)||
- stat(XBL_BACKUP, &xbl_partition_stat)){
- //Non fatal error. Just means this target does not
- //use XBL but relies on sbl whose update is handled
- //by the normal methods.
- fprintf(stderr, "%s: xbl part not found(%s).Assuming sbl in use\n",
- __func__,
- strerror(errno));
- } else {
- //Switch the boot lun so that backup boot LUN is used
- r = gpt_utils_set_xbl_boot_partition(NORMAL_BOOT);
- if(r) {
- fprintf(stderr, "%s: Failed to set xbl backup partition as boot\n",
- __func__);
- goto EXIT;
- }
- }
- }
- //Fix the primary GPT header so that is used
- fprintf(stderr, "%s: Preparing for backup partition update\n",
- __func__);
- r = gpt_set_state(fd, PRIMARY_GPT, GPT_OK);
- if (r) {
- fprintf(stderr, "%s: Fixing primary GPT header failed\n",
- __func__);
- goto EXIT;
- }
- //Corrupt the scondary GPT header
- r = gpt_set_state(fd, SECONDARY_GPT, GPT_BAD_SIGNATURE);
- if (r) {
- fprintf(stderr, "%s: Corrupting secondary GPT header failed\n",
- __func__);
- goto EXIT;
- }
- break;
- case UPDATE_FINALIZE:
- //Undo the changes we had made in the UPDATE_MAIN stage so that the
- //primary/backup GPT headers once again point to the same set of
- //partitions
- fprintf(stderr, "%s: Finalizing partitions\n",
- __func__);
- r = gpt2_set_boot_chain(fd, NORMAL_BOOT);
- if (r < 0) {
- fprintf(stderr, "%s: Setting secondary GPT to normal boot failed\n",
- __func__);
- goto EXIT;
- }
-
- r = gpt_set_state(fd, SECONDARY_GPT, GPT_OK);
- if (r) {
- fprintf(stderr, "%s: Fixing secondary GPT header failed\n",
- __func__);
- goto EXIT;
- }
- break;
- default:;
- }
-
-EXIT:
- if (fd >= 0) {
- fsync(fd);
- close(fd);
- }
- return r;
-}
-
-int add_lun_to_update_list(char *lun_path, struct update_data *dat)
-{
- uint32_t i = 0;
- struct stat st;
- if (!lun_path || !dat){
- fprintf(stderr, "%s: Invalid data",
- __func__);
- return -1;
- }
- if (stat(lun_path, &st)) {
- fprintf(stderr, "%s: Unable to access %s. Skipping adding to list",
- __func__,
- lun_path);
- return -1;
- }
- if (dat->num_valid_entries == 0) {
- fprintf(stderr, "%s: Copying %s into lun_list[%d]\n",
- __func__,
- lun_path,
- i);
- strlcpy(dat->lun_list[0], lun_path,
- PATH_MAX * sizeof(char));
- dat->num_valid_entries = 1;
- } else {
- for (i = 0; (i < dat->num_valid_entries) &&
- (dat->num_valid_entries < MAX_LUNS - 1); i++) {
- //Check if the current LUN is not already part
- //of the lun list
- if (!strncmp(lun_path,dat->lun_list[i],
- strlen(dat->lun_list[i]))) {
- //LUN already in list..Return
- return 0;
- }
- }
- fprintf(stderr, "%s: Copying %s into lun_list[%d]\n",
- __func__,
- lun_path,
- dat->num_valid_entries);
- //Add LUN path lun list
- strlcpy(dat->lun_list[dat->num_valid_entries], lun_path,
- PATH_MAX * sizeof(char));
- dat->num_valid_entries++;
- }
- return 0;
-}
-
-int prepare_boot_update(enum boot_update_stage stage)
-{
- int r, fd;
- int is_ufs = gpt_utils_is_ufs_device();
- struct stat ufs_dir_stat;
- struct update_data data;
- int rcode = 0;
- uint32_t i = 0;
- int is_error = 0;
- const char ptn_swap_list[][MAX_GPT_NAME_SIZE] = { PTN_SWAP_LIST };
- //Holds /dev/block/bootdevice/by-name/*bak entry
- char buf[PATH_MAX] = {0};
- //Holds the resolved path of the symlink stored in buf
- char real_path[PATH_MAX] = {0};
-
- if (!is_ufs) {
- //emmc device. Just pass in path to mmcblk0
- return prepare_partitions(stage, BLK_DEV_FILE);
- } else {
- //Now we need to find the list of LUNs over
- //which the boot critical images are spread
- //and set them up for failsafe updates.To do
- //this we find out where the symlinks for the
- //each of the paths under
- ///dev/block/bootdevice/by-name/PTN_SWAP_LIST
- //actually point to.
- fprintf(stderr, "%s: Running on a UFS device\n",
- __func__);
- memset(&data, '\0', sizeof(struct update_data));
- for (i=0; i < ARRAY_SIZE(ptn_swap_list); i++) {
- //XBL on UFS does not follow the convention
- //of being loaded based on well known GUID'S.
- //We take care of switching the UFS boot LUN
- //explicitly later on.
- if (!strncmp(ptn_swap_list[i],
- PTN_XBL,
- strlen(PTN_XBL)))
- continue;
- snprintf(buf, sizeof(buf),
- "%s/%sbak",
- BOOT_DEV_DIR,
- ptn_swap_list[i]);
- if (stat(buf, &ufs_dir_stat)) {
- continue;
- }
- if (readlink(buf, real_path, sizeof(real_path) - 1) < 0)
- {
- fprintf(stderr, "%s: readlink error. Skipping %s",
- __func__,
- strerror(errno));
- } else {
- if(strlen(real_path) < PATH_TRUNCATE_LOC + 1){
- fprintf(stderr, "Unknown path.Skipping :%s:\n",
- real_path);
- } else {
- real_path[PATH_TRUNCATE_LOC] = '\0';
- add_lun_to_update_list(real_path, &data);
- }
- }
- memset(buf, '\0', sizeof(buf));
- memset(real_path, '\0', sizeof(real_path));
- }
- for (i=0; i < data.num_valid_entries; i++) {
- fprintf(stderr, "%s: Preparing %s for update stage %d\n",
- __func__,
- data.lun_list[i],
- stage);
- rcode = prepare_partitions(stage, data.lun_list[i]);
- if (rcode != 0)
- {
- fprintf(stderr, "%s: Failed to prepare %s.Continuing..\n",
- __func__,
- data.lun_list[i]);
- is_error = 1;
- }
- }
- }
- if (is_error)
- return -1;
- return 0;
-}
-
-//Given a parttion name(eg: rpm) get the path to the block device that
-//represents the GPT disk the partition resides on. In the case of emmc it
-//would be the default emmc dev(/dev/block/mmcblk0). In the case of UFS we look
-//through the /dev/block/bootdevice/by-name/ tree for partname, and resolve
-//the path to the LUN from there.
-static int get_dev_path_from_partition_name(const char *partname,
- char *buf,
- size_t buflen)
-{
- struct stat st;
- char path[PATH_MAX] = {0};
- if (!partname || !buf || buflen < ((PATH_TRUNCATE_LOC) + 1)) {
- ALOGE("%s: Invalid argument", __func__);
- goto error;
- }
- if (gpt_utils_is_ufs_device()) {
- //Need to find the lun that holds partition partname
- snprintf(path, sizeof(path),
- "%s/%s",
- BOOT_DEV_DIR,
- partname);
- if (stat(path, &st)) {
- goto error;
- }
- if (readlink(path, buf, buflen) < 0)
- {
- goto error;
- } else {
- buf[PATH_TRUNCATE_LOC] = '\0';
- }
- } else {
- snprintf(buf, buflen, "/dev/block/mmcblk0");
- }
- return 0;
-
-error:
- return -1;
-}
-
-int gpt_utils_get_partition_map(vector<string>& ptn_list,
- map<string, vector<string>>& partition_map) {
- char devpath[PATH_MAX] = {'\0'};
- map<string, vector<string>>::iterator it;
- if (ptn_list.size() < 1) {
- fprintf(stderr, "%s: Invalid ptn list\n", __func__);
- return -1;
- }
- //Go through the passed in list
- for (uint32_t i = 0; i < ptn_list.size(); i++)
- {
- //Key in the map is the path to the device that holds the
- //partition
- if (get_dev_path_from_partition_name(ptn_list[i].c_str(),
- devpath,
- sizeof(devpath))) {
- //Not necessarily an error. The partition may just
- //not be present.
- continue;
- }
- string path = devpath;
- it = partition_map.find(path);
- if (it != partition_map.end()) {
- it->second.push_back(ptn_list[i]);
- } else {
- vector<string> str_vec;
- str_vec.push_back( ptn_list[i]);
- partition_map.insert(pair<string, vector<string>>
- (path, str_vec));
- }
- memset(devpath, '\0', sizeof(devpath));
- }
- return 0;
-}
-
-//Get the block size of the disk represented by decsriptor fd
-static uint32_t gpt_get_block_size(int fd)
-{
- uint32_t block_size = 0;
- if (fd < 0) {
- ALOGE("%s: invalid descriptor",
- __func__);
- goto error;
- }
- if (ioctl(fd, BLKSSZGET, &block_size) != 0) {
- ALOGE("%s: Failed to get GPT dev block size : %s",
- __func__,
- strerror(errno));
- goto error;
- }
- return block_size;
-error:
- return 0;
-}
-
-//Write the GPT header present in the passed in buffer back to the
-//disk represented by fd
-static int gpt_set_header(uint8_t *gpt_header, int fd,
- enum gpt_instance instance)
-{
- uint32_t block_size = 0;
- off_t gpt_header_offset = 0;
- if (!gpt_header || fd < 0) {
- ALOGE("%s: Invalid arguments",
- __func__);
- goto error;
- }
- block_size = gpt_get_block_size(fd);
- ALOGI("%s: Block size is : %d", __func__, block_size);
- if (block_size == 0) {
- ALOGE("%s: Failed to get block size", __func__);
- goto error;
- }
- if (instance == PRIMARY_GPT)
- gpt_header_offset = block_size;
- else
- gpt_header_offset = lseek64(fd, 0, SEEK_END) - block_size;
- if (gpt_header_offset <= 0) {
- ALOGE("%s: Failed to get gpt header offset",__func__);
- goto error;
- }
- ALOGI("%s: Writing back header to offset %ld", __func__,
- gpt_header_offset);
- if (blk_rw(fd, 1, gpt_header_offset, gpt_header, block_size)) {
- ALOGE("%s: Failed to write back GPT header", __func__);
- goto error;
- }
- return 0;
-error:
- return -1;
-}
-
-//Read out the GPT header for the disk that contains the partition partname
-static uint8_t* gpt_get_header(const char *partname, enum gpt_instance instance)
-{
- uint8_t* hdr = NULL;
- char devpath[PATH_MAX] = {0};
- int64_t hdr_offset = 0;
- uint32_t block_size = 0;
- int fd = -1;
- if (!partname) {
- ALOGE("%s: Invalid partition name", __func__);
- goto error;
- }
- if (get_dev_path_from_partition_name(partname, devpath, sizeof(devpath))
- != 0) {
- ALOGE("%s: Failed to resolve path for %s",
- __func__,
- partname);
- goto error;
- }
- fd = open(devpath, O_RDWR);
- if (fd < 0) {
- ALOGE("%s: Failed to open %s : %s",
- __func__,
- devpath,
- strerror(errno));
- goto error;
- }
- block_size = gpt_get_block_size(fd);
- if (block_size == 0)
- {
- ALOGE("%s: Failed to get gpt block size for %s",
- __func__,
- partname);
- goto error;
- }
-
- hdr = (uint8_t*)malloc(block_size);
- if (!hdr) {
- ALOGE("%s: Failed to allocate memory for gpt header",
- __func__);
- }
- if (instance == PRIMARY_GPT)
- hdr_offset = block_size;
- else {
- hdr_offset = lseek64(fd, 0, SEEK_END) - block_size;
- }
- if (hdr_offset < 0) {
- ALOGE("%s: Failed to get gpt header offset",
- __func__);
- goto error;
- }
- if (blk_rw(fd, 0, hdr_offset, hdr, block_size)) {
- ALOGE("%s: Failed to read GPT header from device",
- __func__);
- goto error;
- }
- close(fd);
- return hdr;
-error:
- if (fd >= 0)
- close(fd);
- if (hdr)
- free(hdr);
- return NULL;
-}
-
-//Returns the partition entry array based on the
-//passed in buffer which contains the gpt header.
-//The fd here is the descriptor for the 'disk' which
-//holds the partition
-static uint8_t* gpt_get_pentry_arr(uint8_t *hdr, int fd)
-{
- uint64_t pentries_start = 0;
- uint32_t pentry_size = 0;
- uint32_t block_size = 0;
- uint32_t pentries_arr_size = 0;
- uint8_t *pentry_arr = NULL;
- int rc = 0;
- if (!hdr) {
- ALOGE("%s: Invalid header", __func__);
- goto error;
- }
- if (fd < 0) {
- ALOGE("%s: Invalid fd", __func__);
- goto error;
- }
- block_size = gpt_get_block_size(fd);
- if (!block_size) {
- ALOGE("%s: Failed to get gpt block size for",
- __func__);
- goto error;
- }
- pentries_start = GET_8_BYTES(hdr + PENTRIES_OFFSET) * block_size;
- pentry_size = GET_4_BYTES(hdr + PENTRY_SIZE_OFFSET);
- pentries_arr_size =
- GET_4_BYTES(hdr + PARTITION_COUNT_OFFSET) * pentry_size;
- pentry_arr = (uint8_t*)calloc(1, pentries_arr_size);
- if (!pentry_arr) {
- ALOGE("%s: Failed to allocate memory for partition array",
- __func__);
- goto error;
- }
- rc = blk_rw(fd, 0,
- pentries_start,
- pentry_arr,
- pentries_arr_size);
- if (rc) {
- ALOGE("%s: Failed to read partition entry array",
- __func__);
- goto error;
- }
- return pentry_arr;
-error:
- if (pentry_arr)
- free(pentry_arr);
- return NULL;
-}
-
-static int gpt_set_pentry_arr(uint8_t *hdr, int fd, uint8_t* arr)
-{
- uint32_t block_size = 0;
- uint64_t pentries_start = 0;
- uint32_t pentry_size = 0;
- uint32_t pentries_arr_size = 0;
- int rc = 0;
- if (!hdr || fd < 0 || !arr) {
- ALOGE("%s: Invalid argument", __func__);
- goto error;
- }
- block_size = gpt_get_block_size(fd);
- if (!block_size) {
- ALOGE("%s: Failed to get gpt block size for",
- __func__);
- goto error;
- }
- ALOGI("%s : Block size is %d", __func__, block_size);
- pentries_start = GET_8_BYTES(hdr + PENTRIES_OFFSET) * block_size;
- pentry_size = GET_4_BYTES(hdr + PENTRY_SIZE_OFFSET);
- pentries_arr_size =
- GET_4_BYTES(hdr + PARTITION_COUNT_OFFSET) * pentry_size;
- ALOGI("%s: Writing partition entry array of size %d to offset %" PRIu64,
- __func__,
- pentries_arr_size,
- pentries_start);
- rc = blk_rw(fd, 1,
- pentries_start,
- arr,
- pentries_arr_size);
- if (rc) {
- ALOGE("%s: Failed to read partition entry array",
- __func__);
- goto error;
- }
- return 0;
-error:
- return -1;
-}
-
-
-
-//Allocate a handle used by calls to the "gpt_disk" api's
-struct gpt_disk * gpt_disk_alloc()
-{
- struct gpt_disk *disk;
- disk = (struct gpt_disk *)malloc(sizeof(struct gpt_disk));
- if (!disk) {
- ALOGE("%s: Failed to allocate memory", __func__);
- goto end;
- }
- memset(disk, 0, sizeof(struct gpt_disk));
-end:
- return disk;
-}
-
-//Free previously allocated/initialized handle
-void gpt_disk_free(struct gpt_disk *disk)
-{
- if (!disk)
- return;
- if (disk->hdr)
- free(disk->hdr);
- if (disk->hdr_bak)
- free(disk->hdr_bak);
- if (disk->pentry_arr)
- free(disk->pentry_arr);
- if (disk->pentry_arr_bak)
- free(disk->pentry_arr_bak);
- free(disk);
- return;
-}
-
-//fills up the passed in gpt_disk struct with information about the
-//disk represented by path dev. Returns 0 on success and -1 on error.
-int gpt_disk_get_disk_info(const char *dev, struct gpt_disk *dsk)
-{
- struct gpt_disk *disk = NULL;
- int fd = -1;
- uint32_t gpt_header_size = 0;
-
- if (!dsk || !dev) {
- ALOGE("%s: Invalid arguments", __func__);
- goto error;
- }
- disk = dsk;
- disk->hdr = gpt_get_header(dev, PRIMARY_GPT);
- if (!disk->hdr) {
- ALOGE("%s: Failed to get primary header", __func__);
- goto error;
- }
- gpt_header_size = GET_4_BYTES(disk->hdr + HEADER_SIZE_OFFSET);
- disk->hdr_crc = crc32(0, disk->hdr, gpt_header_size);
- disk->hdr_bak = gpt_get_header(dev, PRIMARY_GPT);
- if (!disk->hdr_bak) {
- ALOGE("%s: Failed to get backup header", __func__);
- goto error;
- }
- disk->hdr_bak_crc = crc32(0, disk->hdr_bak, gpt_header_size);
-
- //Descriptor for the block device. We will use this for further
- //modifications to the partition table
- if (get_dev_path_from_partition_name(dev,
- disk->devpath,
- sizeof(disk->devpath)) != 0) {
- ALOGE("%s: Failed to resolve path for %s",
- __func__,
- dev);
- goto error;
- }
- fd = open(disk->devpath, O_RDWR);
- if (fd < 0) {
- ALOGE("%s: Failed to open %s: %s",
- __func__,
- disk->devpath,
- strerror(errno));
- goto error;
- }
- disk->pentry_arr = gpt_get_pentry_arr(disk->hdr, fd);
- if (!disk->pentry_arr) {
- ALOGE("%s: Failed to obtain partition entry array",
- __func__);
- goto error;
- }
- disk->pentry_arr_bak = gpt_get_pentry_arr(disk->hdr_bak, fd);
- if (!disk->pentry_arr_bak) {
- ALOGE("%s: Failed to obtain backup partition entry array",
- __func__);
- goto error;
- }
- disk->pentry_size = GET_4_BYTES(disk->hdr + PENTRY_SIZE_OFFSET);
- disk->pentry_arr_size =
- GET_4_BYTES(disk->hdr + PARTITION_COUNT_OFFSET) *
- disk->pentry_size;
- disk->pentry_arr_crc = GET_4_BYTES(disk->hdr + PARTITION_CRC_OFFSET);
- disk->pentry_arr_bak_crc = GET_4_BYTES(disk->hdr_bak +
- PARTITION_CRC_OFFSET);
- disk->block_size = gpt_get_block_size(fd);
- close(fd);
- disk->is_initialized = GPT_DISK_INIT_MAGIC;
- return 0;
-error:
- if (fd >= 0)
- close(fd);
- return -1;
-}
-
-//Get pointer to partition entry from a allocated gpt_disk structure
-uint8_t* gpt_disk_get_pentry(struct gpt_disk *disk,
- const char *partname,
- enum gpt_instance instance)
-{
- uint8_t *ptn_arr = NULL;
- if (!disk || !partname || disk->is_initialized != GPT_DISK_INIT_MAGIC) {
- ALOGE("%s: Invalid argument",__func__);
- goto error;
- }
- ptn_arr = (instance == PRIMARY_GPT) ?
- disk->pentry_arr : disk->pentry_arr_bak;
- return (gpt_pentry_seek(partname, ptn_arr,
- ptn_arr + disk->pentry_arr_size ,
- disk->pentry_size));
-error:
- return NULL;
-}
-
-//Update CRC values for the various components of the gpt_disk
-//structure. This function should be called after any of the fields
-//have been updated before the structure contents are written back to
-//disk.
-int gpt_disk_update_crc(struct gpt_disk *disk)
-{
- uint32_t gpt_header_size = 0;
- if (!disk || (disk->is_initialized != GPT_DISK_INIT_MAGIC)) {
- ALOGE("%s: invalid argument", __func__);
- goto error;
- }
- //Recalculate the CRC of the primary partiton array
- disk->pentry_arr_crc = crc32(0,
- disk->pentry_arr,
- disk->pentry_arr_size);
- //Recalculate the CRC of the backup partition array
- disk->pentry_arr_bak_crc = crc32(0,
- disk->pentry_arr_bak,
- disk->pentry_arr_size);
- //Update the partition CRC value in the primary GPT header
- PUT_4_BYTES(disk->hdr + PARTITION_CRC_OFFSET, disk->pentry_arr_crc);
- //Update the partition CRC value in the backup GPT header
- PUT_4_BYTES(disk->hdr_bak + PARTITION_CRC_OFFSET,
- disk->pentry_arr_bak_crc);
- //Update the CRC value of the primary header
- gpt_header_size = GET_4_BYTES(disk->hdr + HEADER_SIZE_OFFSET);
- //Header CRC is calculated with its own CRC field set to 0
- PUT_4_BYTES(disk->hdr + HEADER_CRC_OFFSET, 0);
- PUT_4_BYTES(disk->hdr_bak + HEADER_CRC_OFFSET, 0);
- disk->hdr_crc = crc32(0, disk->hdr, gpt_header_size);
- disk->hdr_bak_crc = crc32(0, disk->hdr_bak, gpt_header_size);
- PUT_4_BYTES(disk->hdr + HEADER_CRC_OFFSET, disk->hdr_crc);
- PUT_4_BYTES(disk->hdr_bak + HEADER_CRC_OFFSET, disk->hdr_bak_crc);
- return 0;
-error:
- return -1;
-}
-
-//Write the contents of struct gpt_disk back to the actual disk
-int gpt_disk_commit(struct gpt_disk *disk)
-{
- int fd = -1;
- if (!disk || (disk->is_initialized != GPT_DISK_INIT_MAGIC)){
- ALOGE("%s: Invalid args", __func__);
- goto error;
- }
- fd = open(disk->devpath, O_RDWR);
- if (fd < 0) {
- ALOGE("%s: Failed to open %s: %s",
- __func__,
- disk->devpath,
- strerror(errno));
- goto error;
- }
- ALOGI("%s: Writing back primary GPT header", __func__);
- //Write the primary header
- if(gpt_set_header(disk->hdr, fd, PRIMARY_GPT) != 0) {
- ALOGE("%s: Failed to update primary GPT header",
- __func__);
- goto error;
- }
- ALOGI("%s: Writing back primary partition array", __func__);
- //Write back the primary partition array
- if (gpt_set_pentry_arr(disk->hdr, fd, disk->pentry_arr)) {
- ALOGE("%s: Failed to write primary GPT partition arr",
- __func__);
- goto error;
- }
- close(fd);
- return 0;
-error:
- if (fd >= 0)
- close(fd);
- return -1;
-}
diff --git a/gpt-utils/gpt-utils.h b/gpt-utils/gpt-utils.h
deleted file mode 100644
index 1d2a15c..0000000
--- a/gpt-utils/gpt-utils.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright (c) 2013, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __GPT_UTILS_H__
-#define __GPT_UTILS_H__
-#include <vector>
-#include <string>
-#include <map>
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include <unistd.h>
-#include <stdlib.h>
-/******************************************************************************
- * GPT HEADER DEFINES
- ******************************************************************************/
-#define GPT_SIGNATURE "EFI PART"
-#define HEADER_SIZE_OFFSET 12
-#define HEADER_CRC_OFFSET 16
-#define PRIMARY_HEADER_OFFSET 24
-#define BACKUP_HEADER_OFFSET 32
-#define FIRST_USABLE_LBA_OFFSET 40
-#define LAST_USABLE_LBA_OFFSET 48
-#define PENTRIES_OFFSET 72
-#define PARTITION_COUNT_OFFSET 80
-#define PENTRY_SIZE_OFFSET 84
-#define PARTITION_CRC_OFFSET 88
-
-#define TYPE_GUID_OFFSET 0
-#define TYPE_GUID_SIZE 16
-#define PTN_ENTRY_SIZE 128
-#define UNIQUE_GUID_OFFSET 16
-#define FIRST_LBA_OFFSET 32
-#define LAST_LBA_OFFSET 40
-#define ATTRIBUTE_FLAG_OFFSET 48
-#define PARTITION_NAME_OFFSET 56
-#define MAX_GPT_NAME_SIZE 72
-
-/******************************************************************************
- * AB RELATED DEFINES
- ******************************************************************************/
-//Bit 48 onwords in the attribute field are the ones where we are allowed to
-//store our AB attributes.
-#define AB_FLAG_OFFSET (ATTRIBUTE_FLAG_OFFSET + 6)
-#define GPT_DISK_INIT_MAGIC 0xABCD
-#define AB_PARTITION_ATTR_SLOT_ACTIVE (0x1<<2)
-#define AB_PARTITION_ATTR_BOOT_SUCCESSFUL (0x1<<6)
-#define AB_PARTITION_ATTR_UNBOOTABLE (0x1<<7)
-#define AB_SLOT_ACTIVE_VAL 0x3F
-#define AB_SLOT_INACTIVE_VAL 0x0
-#define AB_SLOT_ACTIVE 1
-#define AB_SLOT_INACTIVE 0
-#define AB_SLOT_A_SUFFIX "_a"
-#define AB_SLOT_B_SUFFIX "_b"
-#define PTN_XBL "xbl"
-#define PTN_SWAP_LIST PTN_XBL, \
- "abl", "aop", "devcfg", \
- "dtbo", "hyp", "keymaster", "qupfw", "storsec", \
- "tz", "vbmeta", "xbl_config"
-
-#define AB_PTN_LIST PTN_SWAP_LIST, "boot", "system", "vendor", "modem", "product"
-#define BOOT_DEV_DIR "/dev/block/bootdevice/by-name"
-
-/******************************************************************************
- * HELPER MACROS
- ******************************************************************************/
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-/******************************************************************************
- * TYPES
- ******************************************************************************/
-enum boot_update_stage {
- UPDATE_MAIN = 1,
- UPDATE_BACKUP,
- UPDATE_FINALIZE
-};
-
-enum gpt_instance {
- PRIMARY_GPT = 0,
- SECONDARY_GPT
-};
-
-enum boot_chain {
- NORMAL_BOOT = 0,
- BACKUP_BOOT
-};
-
-struct gpt_disk {
- //GPT primary header
- uint8_t *hdr;
- //primary header crc
- uint32_t hdr_crc;
- //GPT backup header
- uint8_t *hdr_bak;
- //backup header crc
- uint32_t hdr_bak_crc;
- //Partition entries array
- uint8_t *pentry_arr;
- //Partition entries array for backup table
- uint8_t *pentry_arr_bak;
- //Size of the pentry array
- uint32_t pentry_arr_size;
- //Size of each element in the pentry array
- uint32_t pentry_size;
- //CRC of the partition entry array
- uint32_t pentry_arr_crc;
- //CRC of the backup partition entry array
- uint32_t pentry_arr_bak_crc;
- //Path to block dev representing the disk
- char devpath[PATH_MAX];
- //Block size of disk
- uint32_t block_size;
- uint32_t is_initialized;
-};
-
-/******************************************************************************
- * FUNCTION PROTOTYPES
- ******************************************************************************/
-int prepare_boot_update(enum boot_update_stage stage);
-//GPT disk methods
-struct gpt_disk* gpt_disk_alloc();
-//Free previously allocated gpt_disk struct
-void gpt_disk_free(struct gpt_disk *disk);
-//Get the details of the disk holding the partition whose name
-//is passed in via dev
-int gpt_disk_get_disk_info(const char *dev, struct gpt_disk *disk);
-
-//Get pointer to partition entry from a allocated gpt_disk structure
-uint8_t* gpt_disk_get_pentry(struct gpt_disk *disk,
- const char *partname,
- enum gpt_instance instance);
-
-//Update the crc fields of the modified disk structure
-int gpt_disk_update_crc(struct gpt_disk *disk);
-
-//Write the contents of struct gpt_disk back to the actual disk
-int gpt_disk_commit(struct gpt_disk *disk);
-
-//Return if the current device is UFS based or not
-int gpt_utils_is_ufs_device();
-
-//Swtich betwieen using either the primary or the backup
-//boot LUN for boot. This is required since UFS boot partitions
-//cannot have a backup GPT which is what we use for failsafe
-//updates of the other 'critical' partitions. This function will
-//not be invoked for emmc targets and on UFS targets is only required
-//to be invoked for XBL.
-//
-//The algorithm to do this is as follows:
-//- Find the real block device(eg: /dev/block/sdb) that corresponds
-// to the /dev/block/bootdevice/by-name/xbl(bak) symlink
-//
-//- Once we have the block device 'node' name(sdb in the above example)
-// use this node to to locate the scsi generic device that represents
-// it by checking the file /sys/block/sdb/device/scsi_generic/sgY
-//
-//- Once we locate sgY we call the query ioctl on /dev/sgy to switch
-//the boot lun to either LUNA or LUNB
-int gpt_utils_set_xbl_boot_partition(enum boot_chain chain);
-
-//Given a vector of partition names as a input and a reference to a map,
-//populate the map to indicate which physical disk each of the partitions
-//sits on. The key in the map is the path to the block device where the
-//partition lies and the value is a vector of strings indicating which of
-//the passed in partition names sits on that device.
-int gpt_utils_get_partition_map(std::vector<std::string>& partition_list,
- std::map<std::string,std::vector<std::string>>& partition_map);
-#ifdef __cplusplus
-}
-#endif
-#endif /* __GPT_UTILS_H__ */
diff --git a/hidl/android.hidl.base@1.0.so-32 b/hidl/android.hidl.base@1.0.so-32
deleted file mode 100755
index b8c51c8..0000000
--- a/hidl/android.hidl.base@1.0.so-32
+++ /dev/null
Binary files differ
diff --git a/hidl/android.hidl.base@1.0.so-64 b/hidl/android.hidl.base@1.0.so-64
deleted file mode 100755
index a3c76e7..0000000
--- a/hidl/android.hidl.base@1.0.so-64
+++ /dev/null
Binary files differ
diff --git a/init.hardware.chamber.rc.userdebug b/init.hardware.chamber.rc.userdebug
deleted file mode 100644
index ebfb336..0000000
--- a/init.hardware.chamber.rc.userdebug
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-on property:init.svc.vendor.thermal-engine=running && property:persist.vendor.disable.thermal.control=1
- stop vendor.thermal-engine
-
-on property:persist.vendor.disable.thermal.control=1
- write /sys/devices/virtual/thermal/tz-by-name/sdm-therm/emul_temp 25000
- write /sys/devices/virtual/thermal/tz-by-name/usbc-therm/emul_temp 25000
- write /sys/module/overheat_mitigation/parameters/enable 0
-
-on property:persist.vendor.disable.usb.overheat.mitigation=1
- write /sys/devices/virtual/thermal/tz-by-name/usbc-therm/emul_temp 25000
diff --git a/init.hardware.diag.rc.user b/init.hardware.diag.rc.user
deleted file mode 100644
index 2f1a417..0000000
--- a/init.hardware.diag.rc.user
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-on property:ro.boot.mode=normal
- rm /dev/diag
- rm /dev/diagtest
diff --git a/init.hardware.diag.rc.userdebug b/init.hardware.diag.rc.userdebug
deleted file mode 100644
index 43661e7..0000000
--- a/init.hardware.diag.rc.userdebug
+++ /dev/null
@@ -1,110 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-on init
- chmod 666 /dev/diag
-
-on post-fs-data
- # Modem logging collection
- mkdir /data/vendor/radio 0777 radio radio
- mkdir /data/vendor/radio/diag_logs 0777 system system
- rm /data/vendor/radio/diag_logs/logs/diag_poweron_log.qmdl
- # WLAN logging collection
- mkdir /data/vendor/wifi 0777 system system
- mkdir /data/vendor/wifi/cnss_diag 0777 system system
-
-service diag_mdlog_start /vendor/bin/diag_mdlog
- class late_start
- user shell
- group system diag media_rw
- disabled
- oneshot
-
-service diag_mdlog_stop /vendor/bin/diag_mdlog -k
- class late_start
- user shell
- group system diag media_rw
- disabled
- oneshot
-
-on boot && property:persist.vendor.sys.modem.diag.mdlog=*
- rm /data/vendor/radio/diag_logs/diag_mdlog_pid
- setprop vendor.sys.modem.diag.mdlog ${persist.vendor.sys.modem.diag.mdlog}
-
-on property:vendor.sys.modem.diag.mdlog=true
- start diag_mdlog_start
-
-on property:vendor.sys.modem.diag.mdlog=false
- start diag_mdlog_stop
-
-on property:persist.vendor.sys.cnss.diag_qxdm=true
- start vendor.cnss_diag
-
-on property:persist.vendor.sys.cnss.diag_qxdm=false
- stop vendor.cnss_diag
-
-on property:persist.vendor.sys.cnss.diag_txt=true
- start vendor.cnss_diag_txt
-
-on property:persist.vendor.sys.cnss.diag_txt=false
- stop vendor.cnss_diag_txt
-
-service vendor.cnss_diag /vendor/bin/cnss_diag -q -u -w
- class late_start
- user system
- group system
- disabled
- oneshot
-
-service vendor.cnss_diag_txt /vendor/bin/cnss_diag -s -f -P -m /data/vendor/wifi/cnss_diag/cnss_diag.conf -t HELIUM
- class late_start
- user system
- group system
- disabled
- oneshot
-
-on property:vendor.debug.ramdump.force_crash=true
- write /proc/sysrq-trigger "c"
-
-on property:ro.vendor.bluetooth.ftm_enabled=true
- start ftmd
-
-service ftmd /vendor/bin/ftmdaemon
- class late_start
- user root
- group bluetooth net_bt_admin misc diag net_bt
- disabled
- oneshot
-
-on property:vendor.sys.logger.bluetooth=true
- setprop persist.vendor.service.bdroid.snooplog true
- setprop persist.vendor.service.bdroid.fwsnoop true
-
-on property:vendor.sys.logger.bluetooth=false
- setprop persist.vendor.service.bdroid.snooplog false
- setprop persist.vendor.service.bdroid.fwsnoop false
-
-on property:persist.bluetooth.btsnoopenable=true
- setprop persist.vendor.service.bdroid.soclog true
-
-on property:persist.bluetooth.btsnoopenable=false
- setprop persist.vendor.service.bdroid.soclog false
-
-on property:vendor.usb.config=*
- start usbd
-
-on property:persist.vendor.usb.usbradio.config=*
- start usbd
diff --git a/init.hardware.ipa.rc.userdebug b/init.hardware.ipa.rc.userdebug
deleted file mode 100644
index a690c0d..0000000
--- a/init.hardware.ipa.rc.userdebug
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-on boot
- # Enable RmNet IPA3 TX timeout detection
- write /d/ipawwan/debug 1
diff --git a/init.hardware.mpssrfs.rc.user b/init.hardware.mpssrfs.rc.user
deleted file mode 100644
index f75a413..0000000
--- a/init.hardware.mpssrfs.rc.user
+++ /dev/null
@@ -1,5 +0,0 @@
-on post-fs-data
- # Modem Remote FS
- mkdir /data/vendor/rfs 0770 vendor_rfs vendor_rfs
- mkdir /data/vendor/rfs/mpss 0770 vendor_rfs vendor_rfs
- mkdir /data/vendor/tombstones/rfs 0770 vendor_rfs vendor_rfs
diff --git a/init.hardware.mpssrfs.rc.userdebug b/init.hardware.mpssrfs.rc.userdebug
deleted file mode 100644
index 5939bfc..0000000
--- a/init.hardware.mpssrfs.rc.userdebug
+++ /dev/null
@@ -1,11 +0,0 @@
-on post-fs-data
- # Modem Remote FS
- mkdir /data/vendor/rfs 0770 vendor_rfs vendor_rfs
- mkdir /data/vendor/rfs/mpss 0770 vendor_rfs vendor_rfs
- mkdir /data/vendor/tombstones/rfs 0770 vendor_rfs vendor_rfs
- write /data/vendor/rfs/mpss/mcfg_nv_list_flag "1"
- chown vendor_rfs vendor_rfs /data/vendor/rfs/mpss/mcfg_nv_list_flag
- chmod 0700 /data/vendor/rfs/mpss/mcfg_nv_list_flag
-
-on property:vendor.sys.modem.diag.efsdump=true
- chmod 0660 /data/vendor/rfs/mpss/modem_efs
diff --git a/init.hardware.rc b/init.hardware.rc
deleted file mode 100644
index d11e4da..0000000
--- a/init.hardware.rc
+++ /dev/null
@@ -1,719 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-import /vendor/etc/init/hw/init.${ro.boot.hardware.platform}.usb.rc
-import /vendor/etc/init/hw/init.${ro.boot.hardware.platform}.diag.rc
-import /vendor/etc/init/hw/init.${ro.boot.hardware.platform}.logging.rc
-import /vendor/etc/init/hw/init.${ro.boot.hardware.platform}.mpssrfs.rc
-import /vendor/etc/init/hw/init.${ro.boot.hardware.platform}.power.rc
-
-service vendor.charger /charger
- class charger
- seclabel u:r:charger:s0
-
-on early-init
- mount debugfs debugfs /sys/kernel/debug
- chmod 0755 /sys/kernel/debug
-
- # Disable EAS
- write /sys/kernel/debug/sched_features NO_ENERGY_AWARE
- mount_all /vendor/etc/fstab.persist --early
-
-# Disable VDSO on JAWS boards.
-on early-init && property:ro.revision="DEV1.0"
- write /sys/module/vdso/parameters/enable_32 0
-
-# Skip init trigger for charger mode
-on early-init && property:ro.boot.mode=charger
- setprop vendor.skip.init 1
-
-# We need vold early for metadata encryption
-on early-fs
- start vold
-
-on init && property:vendor.skip.init=0
- # Disable UFS powersaving
- write /sys/devices/platform/soc/${ro.boot.bootdevice}/clkgate_enable 0
- write /sys/devices/platform/soc/${ro.boot.bootdevice}/hibern8_on_idle_enable 0
-
- # Disable powersaving
- write /sys/module/lpm_levels/parameters/sleep_disabled 1
-
- wait /dev/block/platform/soc/${ro.boot.bootdevice}
- symlink /dev/block/platform/soc/${ro.boot.bootdevice} /dev/block/bootdevice
-
- # start qseecomd early as we mount system/ vendor/ early
- # vold needs keymaster that needs qseecomd
- start vendor.qseecomd
- start keymaster-4-0
-
- #start vendor.citadeld
- #start vendor.keymaster-4-0-citadel
-
- # Support legacy paths
- symlink /sdcard /mnt/sdcard
- symlink /sdcard /storage/sdcard0
-
- # Loading kernel modules in background
- start insmod_sh
-
- # bring back all cores
- write /sys/devices/system/cpu/cpu0/online 1
- write /sys/devices/system/cpu/cpu1/online 1
- write /sys/devices/system/cpu/cpu2/online 1
- write /sys/devices/system/cpu/cpu3/online 1
- write /sys/devices/system/cpu/cpu4/online 1
- write /sys/devices/system/cpu/cpu5/online 1
- write /sys/devices/system/cpu/cpu6/online 1
- write /sys/devices/system/cpu/cpu7/online 1
-
- # configure governor settings for little cluster
- write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor schedutil
- write /sys/devices/system/cpu/cpu0/cpufreq/schedutil/up_rate_limit_us 500
- write /sys/devices/system/cpu/cpu0/cpufreq/schedutil/down_rate_limit_us 20000
-
- # configure governor settings for big cluster
- write /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor schedutil
- write /sys/devices/system/cpu/cpu4/cpufreq/schedutil/up_rate_limit_us 500
- write /sys/devices/system/cpu/cpu4/cpufreq/schedutil/down_rate_limit_us 20000
-
- # configure governor settings for big big CPU
- write /sys/devices/system/cpu/cpu7/cpufreq/scaling_governor schedutil
- write /sys/devices/system/cpu/cpu7/cpufreq/schedutil/up_rate_limit_us 500
- write /sys/devices/system/cpu/cpu7/cpufreq/schedutil/down_rate_limit_us 20000
-
- # ZRAM setup
- write /sys/block/zram0/comp_algorithm lz4
- write /proc/sys/vm/page-cluster 0
-
- # Some user code relies on ro.boot.hardware.revision
- setprop ro.boot.hardware.revision ${ro.revision}
-
- # set default schedTune value for foreground/top-app
- write /dev/stune/foreground/schedtune.prefer_idle 1
- write /dev/stune/top-app/schedtune.boost 10
- write /dev/stune/top-app/schedtune.prefer_idle 1
-
- mkdir /dev/cpuset/camera-daemon
- write /dev/cpuset/camera-daemon/cpus 0-7
- write /dev/cpuset/camera-daemon/mems 0
- chown system system /dev/cpuset/camera-daemon
- chown system system /dev/cpuset/camera-daemon/tasks
- chmod 0664 /dev/cpuset/camera-daemon/tasks
-
- # Enable suspend clock reporting
- write /sys/kernel/debug/clk/debug_suspend 1
-
-on late-init
- setprop vendor.thermal.config thermal_info_config.json
-
-on fs
- mount_all /vendor/etc/fstab.${ro.boot.hardware.platform} --early
-
- mkdir /mnt/vendor/persist/audio 0770 media audio
- mkdir /mnt/vendor/persist/data 0700 system system
- mkdir /mnt/vendor/persist/display 0770 system graphics
- mkdir /mnt/vendor/persist/haptics 0770 system system
- mkdir /mnt/vendor/persist/rfs 0770 root system
- mkdir /mnt/vendor/persist/hlos_rfs 0770 root system
- mkdir /mnt/vendor/persist/oslo 0770 system system
- mkdir /mnt/vendor/persist/touch 0770 system system
- chmod 0770 /mnt/vendor/persist/rfs
- chmod 0770 /mnt/vendor/persist/rfs/shared
- chmod 0770 /mnt/vendor/persist/rfs/msm
- chmod 0770 /mnt/vendor/persist/rfs/msm/adsp
- chmod 0770 /mnt/vendor/persist/rfs/msm/mpss
- chmod 0770 /mnt/vendor/persist/rfs/msm/slpi
- chmod 0770 /mnt/vendor/persist/rfs/mdm
- chmod 0770 /mnt/vendor/persist/rfs/mdm/adsp
- chmod 0770 /mnt/vendor/persist/rfs/mdm/mpss
- chmod 0770 /mnt/vendor/persist/rfs/mdm/slpi
- chmod 0770 /mnt/vendor/persist/rfs/mdm/tn
- chmod 0770 /mnt/vendor/persist/rfs/apq
- chmod 0770 /mnt/vendor/persist/rfs/apq/gnss
- chmod 0770 /mnt/vendor/persist/hlos_rfs
-
- # for cycle count backup
- mkdir /mnt/vendor/persist/battery 0700 system system
-
- restorecon_recursive /mnt/vendor/persist
-
-on post-fs
- # set RLIMIT_MEMLOCK to 64MB
- setrlimit 8 67108864 67108864
-
- # Wait qseecomd started
- wait_for_prop vendor.sys.listeners.registered true
-
- # load IPA FWs
- # This must be started when vendor.sys.listeners.registered is true
- write /dev/ipa 1
-
-on late-fs
- # Start services for bootanim
- #start color_init
- #wait_for_prop vendor.display.native_display_primaries_ready 1
- #setprop ro.surface_flinger.display_primary_red ${vendor.display.primary_red}
- #setprop ro.surface_flinger.display_primary_green ${vendor.display.primary_green}
- #setprop ro.surface_flinger.display_primary_blue ${vendor.display.primary_blue}
- #setprop ro.surface_flinger.display_primary_white ${vendor.display.primary_white}
- start surfaceflinger
- start bootanim
- start vendor.hwcomposer-2-3
- start vendor.configstore-hal
- start vendor.qti.hardware.display.allocator
-
- # Wait for keymaster HALs (TEE and StrongBox)
- #exec_start wait_for_strongbox
-
-
- # Mount RW partitions which need run fsck
- mount_all /vendor/etc/fstab.${ro.boot.hardware.platform} --late
-
- # Required for time_daemon
- mkdir /mnt/vendor/persist/time 0770 system system
-
- # Start time daemon early so that the system time can be set early
- start time_daemon
-
- # Init sensor specific services
- start init-sensors-sh
-
- # turn off vblank irq immediately after turning off
- write /sys/module/drm/parameters/vblankoffdelay -1
-
-on post-fs-data
- mkdir /vendor/data/tombstones 0771 system system
- mkdir /tombstones/modem 0771 system system
- mkdir /tombstones/lpass 0771 system system
- mkdir /tombstones/wcnss 0771 system system
- mkdir /tombstones/dsps 0771 system system
- mkdir /data/vendor/hbtp 0750 system system
- mkdir /data/misc/seemp 0700 system system
- mkdir /data/vendor/tloc 0700 system drmrpc
- mkdir /data/vendor/nnhal 0700 system system
- mkdir /data/vendor/time 0770 system system
- mkdir /data/vendor/modem_fdr 0700 root system
- mkdir /data/vendor/display 0770 system graphics
-
-on zygote-start
- # zygote is started in common init.rc
- # and now we can continue initialize /data/
- mkdir /data/vendor/ipa 0770 radio radio
- chown radio radio /data/vendor/ipa
-
- # Create the directories used by the Wireless subsystem
- mkdir /data/vendor/wifi 0771 wifi wifi
- mkdir /data/vendor/wifi/wpa 0770 wifi wifi
- mkdir /data/vendor/wifi/wpa/sockets 0770 wifi wifi
-
- # Create the directories used by CnE subsystem
- mkdir /data/vendor/connectivity 0771 radio radio
- chown radio radio /data/vendor/connectivity
-
- # Create directory for radio
- mkdir /data/vendor/radio 0773 system radio
- mkdir /data/vendor/modem_stat 0771 system radio
- write /data/vendor/modem_stat/debug.txt ""
- chown system radio /data/vendor/modem_stat/debug.txt
- chmod 0664 /data/vendor/modem_stat/debug.txt
-
- # Mark the copy complete flag to not completed
- write /data/vendor/radio/copy_complete 0
- chown radio radio /data/vendor/radio/copy_complete
- chmod 0660 /data/vendor/radio/copy_complete
-
- # File flags for prebuilt ril db file
- write /data/vendor/radio/prebuilt_db_support 1
- chown radio radio /data/vendor/radio/prebuilt_db_support
- chmod 0400 /data/vendor/radio/prebuilt_db_support
- write /data/vendor/radio/db_check_done 0
- chown radio radio /data/vendor/radio/db_check_done
- chmod 0660 /data/vendor/radio/db_check_done
-
- # Create directories for Location services
- mkdir /data/vendor/location 0770 gps gps
- mkdir /data/vendor/location/mq 0770 gps gps
- mkdir /data/vendor/location/xtwifi 0770 gps gps
- mkdir /dev/socket/location 0770 gps gps
- mkdir /dev/socket/location/mq 0770 gps gps
- mkdir /dev/socket/location/xtra 0770 gps gps
-
-on early-boot
- # Set up sensors-related directories and permissions
- chmod 775 /mnt/vendor/persist/sensors
- chmod 664 /mnt/vendor/persist/sensors/sensors_settings
- chown root system /mnt/vendor/persist/sensors/registry
- chmod 775 /mnt/vendor/persist/sensors/registry
- chown root system /mnt/vendor/persist/sensors/registry/registry
- chmod 775 /mnt/vendor/persist/sensors/registry/registry
- chmod 664 /mnt/vendor/persist/sensors/registry/registry/sensors_registry
- chown system root /mnt/vendor/persist/sensors/sensors_settings
- chown root root /mnt/vendor/persist/sensors/registry/registry/sensors_settings
-
- mkdir /data/vendor/sensors 0770
- chown system system /data/vendor/sensors
-
- chmod 770 /mnt/vendor/persist/audio
- chmod 660 /mnt/vendor/persist/audio/audio.cal
- chown media audio /mnt/vendor/persist/audio
- chown audioserver audio /mnt/vendor/persist/audio/audio.cal
-
- # Set up haptics-related directories and permissions
- chmod 770 /mnt/vendor/persist/haptics
- chmod 440 /mnt/vendor/persist/haptics/cs40l25a.cal
- chown system system /mnt/vendor/persist/haptics
- chown system system /mnt/vendor/persist/haptics/cs40l25a.cal
-
- # Set up oslo-related directories and permissions
- chmod 770 /mnt/vendor/persist/oslo
- chmod 660 /mnt/vendor/persist/oslo/oslo.cal
- chown system system /mnt/vendor/persist/oslo
- chown system system /mnt/vendor/persist/oslo/oslo.cal
-
- # Set up touch directories and permissions
- chmod 770 /mnt/vendor/persist/touch
- chown system system /mnt/vendor/persist/touch
-
- # Permission for lights driver
- chown system system /sys/class/backlight/panel0-backlight/brightness
- chown system system /sys/class/backlight/panel0-backlight/vr_mode
- chown system system /sys/class/backlight/panel0-backlight/hbm_mode
-
- # Wait for insmod_sh to finish all modules
- wait_for_prop vendor.all.modules.ready 1
-
- # Update dm-verity state and set partition.*.verified properties
- verity_update_state
-
- # Wait for insmod_sh to finish all boot devices
- wait_for_prop vendor.all.devices.ready 1
-
- # Permission for Vibrator
- chown system system /sys/class/leds/vibrator/device/asp_enable
- chown system system /sys/class/leds/vibrator/device/comp_enable
- chown system system /sys/class/leds/vibrator/device/cp_dig_scale
- chown system system /sys/class/leds/vibrator/device/cp_trigger_duration
- chown system system /sys/class/leds/vibrator/device/cp_trigger_index
- chown system system /sys/class/leds/vibrator/device/cp_trigger_q_sub
- chown system system /sys/class/leds/vibrator/device/cp_trigger_queue
- chown system system /sys/class/leds/vibrator/device/dig_scale
- chown system system /sys/class/leds/vibrator/device/exc_enable
- chown system system /sys/class/leds/vibrator/device/f0_stored
- chown system system /sys/class/leds/vibrator/device/fw_rev
- chown system system /sys/class/leds/vibrator/device/gpio1_fall_dig_scale
- chown system system /sys/class/leds/vibrator/device/gpio1_fall_index
- chown system system /sys/class/leds/vibrator/device/gpio1_rise_dig_scale
- chown system system /sys/class/leds/vibrator/device/gpio1_rise_index
- chown system system /sys/class/leds/vibrator/device/heartbeat
- chown system system /sys/class/leds/vibrator/device/hw_reset
- chown system system /sys/class/leds/vibrator/device/num_waves
- chown system system /sys/class/leds/vibrator/device/q_stored
- chown system system /sys/class/leds/vibrator/device/redc_comp_enable
- chown system system /sys/class/leds/vibrator/device/redc_stored
- chown system system /sys/class/leds/vibrator/device/standby_timeout
- chown system system /sys/class/leds/vibrator/device/vbatt_max
- chown system system /sys/class/leds/vibrator/device/vbatt_min
-
- # Permission for rainbow sensor
- chown system system /sys/devices/platform/soc/994000.i2c/i2c-3/3-0020/rainbow_enable
- chmod 0660 /sys/devices/platform/soc/994000.i2c/i2c-3/3-0020/rainbow_enable
- chown system system /sys/devices/platform/soc/994000.i2c/i2c-3/3-0020/rainbow_read_byte
- chmod 0660 /sys/devices/platform/soc/994000.i2c/i2c-3/3-0020/rainbow_read_byte
- chown system system /sys/devices/platform/soc/994000.i2c/i2c-3/3-0020/rainbow_write_byte
- chmod 0660 /sys/devices/platform/soc/994000.i2c/i2c-3/3-0020/rainbow_write_byte
- chown system system /dev/vd6281
- chmod 0660 /dev/vd6281
- chown system system /mnt/vendor/persist/camera/rals_fac_test
- chmod 0660 /mnt/vendor/persist/camera/rals_fac_test
-
- # Permission for Athletico
- chown system system /dev/sensor_tunnel
- chmod 0660 /dev/sensor_tunnel
-
- # FG cycle count read from dumpstate + backup restore from health HAL (and pixelstats)
- chown system system /sys/class/power_supply/maxfg/cycle_counts_bins
-
- # Permission for Pixelstats
- chown system system /sys/class/misc/msm_cirrus_playback/resistance_left_right
- chown system system /sys/devices/platform/soc/1d84000.ufshc/slowio_read_cnt
- chown system system /sys/devices/platform/soc/1d84000.ufshc/slowio_write_cnt
- chown system system /sys/devices/platform/soc/1d84000.ufshc/slowio_unmap_cnt
- chown system system /sys/devices/platform/soc/1d84000.ufshc/slowio_sync_cnt
-
- # Permission for Health Storage HAL
- chown system system /sys/devices/platform/soc/1d84000.ufshc/manual_gc
-
- # Permissions for reading display native color gamut
- chown system graphics /mnt/vendor/persist/display/native_gamut.csv
-
-on boot
- # This location is used by QCRIL to host UNIX domain
- # socket files used for internal IPC within QCRIL
- # modules
- mkdir /dev/socket/qmux_radio 0770 radio radio
- chmod 2770 /dev/socket/qmux_radio
-
- setprop wifi.interface wlan0
-
- chown system system /sys/kernel/hbtp/display_pwr
- start rmt_storage
- start rfs_access
-
- # default country code
- setprop ro.boot.wificountrycode 00
-
- # WLAN debug access
- chown system system /d/icnss/stats
-
-service init-radio-sh /vendor/bin/init.radio.sh
- class late_start
- user radio
- group root radio
- oneshot
-
-on charger
- stop vendor.qseecomd
- stop keymaster-4-0
- setprop sys.usb.configfs 1
-
- # Enable UFS powersaving
- write /sys/devices/platform/soc/${ro.boot.bootdevice}/clkgate_enable 1
- write /sys/devices/platform/soc/${ro.boot.bootdevice}/hibern8_on_idle_enable 1
-
- # Enable EAS
- write /sys/kernel/debug/sched_features ENERGY_AWARE
-
- # Enable powersaving
- write /sys/module/lpm_levels/parameters/sleep_disabled 0
-
-on property:sys.boot_completed=1
- # Enable EAS
- write /sys/kernel/debug/sched_features ENERGY_AWARE
-
- # No sleep till proto!
- exec - system system -- svc power stayon true
-
- # Enable UFS powersaving
- write /sys/devices/platform/soc/${ro.boot.bootdevice}/clkgate_enable 1
- write /sys/devices/platform/soc/${ro.boot.bootdevice}/hibern8_on_idle_enable 1
-
- # Enable powersaving
- write /sys/module/lpm_levels/parameters/sleep_disabled 0
-
- # F2FS tuning: issue discard commands up to 128MB
- write /sys/block/dm-7/queue/discard_max_bytes 134217728
-
- # Block layer tuning: discard chunk size up to 128MB
- # Otherwise, contiguous discards can be merged
- write /sys/block/sda/queue/discard_max_bytes 134217728
-
- # Enable ZRAM on boot_complete
- swapon_all /vendor/etc/fstab.${ro.boot.hardware.platform}
- write /proc/sys/vm/swappiness 100
-
- # Setup runtime cpusets
- write /dev/cpuset/top-app/cpus 0-7
- write /dev/cpuset/foreground/cpus 0-3,5-6
- write /dev/cpuset/background/cpus 0-1
- write /dev/cpuset/system-background/cpus 0-3
- write /dev/cpuset/restricted/cpus 0-3
-
- # Setup runtime blkio
- # value for group_idle is us
- write /dev/blkio/blkio.weight 1000
- write /dev/blkio/background/blkio.weight 10
- write /dev/blkio/blkio.group_idle 2000
- write /dev/blkio/background/blkio.group_idle 0
-
- # UFS health
- chmod 755 /sys/kernel/debug/ufshcd0
- chmod 644 /sys/kernel/debug/ufshcd0/show_hba
- chmod 644 /sys/kernel/debug/ufshcd0/stats/err_stats
- chmod 644 /sys/kernel/debug/ufshcd0/stats/io_stats
- chmod 644 /sys/kernel/debug/ufshcd0/stats/req_stats
-
- # HardwareInfo needs to be able to read display info
- chmod 444 /sys/devices/platform/soc/soc:qcom,dsi-display-primary/panel_info/panel0/serial_number
- chmod 444 /sys/devices/platform/soc/soc:qcom,dsi-display-primary/panel_info/panel0/panel_vendor_name
-
- # Maxim FG dump for dumpstate
- chown system system /sys/kernel/debug/regmap/1-0036/registers
- chown system system /sys/kernel/debug/regmap/1-000b/registers
- chown system system /sys/kernel/debug/google_battery/cycle_count_bins
- chown system system /sys/kernel/debug/google_battery/ssoc_gdf
- chown system system /sys/kernel/debug/google_battery/ssoc_rls
- chown system system /sys/kernel/debug/google_battery/ssoc_uic
- chown system system /sys/kernel/debug/google_battery/ssoc_uicurve
- chown system system /sys/kernel/debug/google_charger/pps_op_ua
- chown system system /sys/kernel/debug/google_charger/pps_out_uv
-
- # Permission for Athletico
- chown system system /dev/iaxxx-module-celldrv
- chmod 0660 /dev/iaxxx-module-celldrv
-
- # Permission for bootloader logs
- chown root log /proc/bldrlog
- chmod 0444 /proc/bldrlog
-
-service vendor.per_mgr /vendor/bin/pm-service
- class core
- user system
- group system
- ioprio rt 4
-
-service per_proxy /vendor/bin/pm-proxy
- class core
- user system
- group system
- disabled
-
-on property:init.svc.vendor.per_mgr=running
- start per_proxy
-
-on property:sys.shutdown.requested=*
- stop per_proxy
-
-service vendor.qseecomd /vendor/bin/qseecomd
- class core
- user root
- group root
-
-service vendor.thermal-engine /vendor/bin/thermal-engine -c /vendor/etc/thermal-engine-${ro.hardware}.conf
- class main
- user root
- socket thermal-send-client stream 0666 system system
- socket thermal-recv-client stream 0660 system system
- socket thermal-recv-passive-client stream 0666 system system
- socket thermal-send-rule stream 0660 system system
- group root
-
-service init-sensors-sh /vendor/bin/init.sensors.sh
- class main
- user root
- group root system
- disabled
- oneshot
-
-service sensors.qti /vendor/bin/sensors.qti
- class core
- user system
- group system
- # Grants the ability for this daemon to bind IPC router ports so it can
- # register QMI services
- capabilities NET_BIND_SERVICE
-
-service vendor.adsprpcd /vendor/bin/adsprpcd
- class main
- user system
- group media
-
-service vendor.adsprpcd_audiopd /vendor/bin/adsprpcd audiopd
- class main
- user media
- group media
-
-service vendor.adsprpcd_sensorspd /vendor/bin/adsprpcd sensorspd
- class main
- user system
- group system
-
-service vendor.cdsprpcd /vendor/bin/cdsprpcd
- class main
- user system
- group system
-
-service vendor.imsqmidaemon /system/vendor/bin/imsqmidaemon
- class main
- user radio
- socket ims_qmid stream 0660 system radio
- group radio log diag
-
-service vendor.imsdatadaemon /system/vendor/bin/imsdatadaemon
- class main
- user radio
- socket ims_datad stream 0660 system radio
- group radio wifi inet log diag
- disabled
-
-service vendor.imsrcsservice /system/vendor/bin/imsrcsd
- class main
- user radio
- group radio diag inet log wakelock
-
-on property:vendor.ims.QMI_DAEMON_STATUS=1
- start vendor.imsdatadaemon
-
-service vendor.ims_rtp_daemon /system/vendor/bin/ims_rtp_daemon
- class main
- user radio
- group radio inet log
-
-service cnd /vendor/bin/cnd
- class main
- user system
- group system wifi inet radio wakelock net_admin
-
-service vendor.chre /vendor/bin/chre
- class late_start
- user system
- group system wakelock
- capabilities BLOCK_SUSPEND
- socket chre seqpacket 0660 root system
- shutdown critical
-
-service wait_for_strongbox /vendor/bin/hw/wait_for_strongbox
- user root
- group root system
- priority -20
- ioprio rt 0
-
-on property:vendor.ims.DATA_DAEMON_STATUS=1
- restart vendor.ims_rtp_daemon
-
-service time_daemon /vendor/bin/time_daemon
- class core
- user root
- group root
-
-service vendor.qrtr-ns /vendor/bin/qrtr-ns -f
- class core
- user vendor_qrtr
- group vendor_qrtr
- capabilities NET_BIND_SERVICE
-
-service irsc_util /vendor/bin/irsc_util "/vendor/etc/sec_config"
- class core
- user root
- oneshot
-
-service rmt_storage /vendor/bin/rmt_storage
- class core
- user root
- ioprio rt 0
- shutdown critical
-
-service tftp_server /vendor/bin/tftp_server
- class core
- user root
- group root system
-
-service modem_svc /vendor/bin/modem_svc
- class core
- user root
- group system
- capabilities NET_BIND_SERVICE
-
-service vendor.ss_ramdump /vendor/bin/subsystem_ramdump
- class main
- user root
- group system
- disabled
-
-service vendor.ssr_setup /vendor/bin/ssr_setup
- oneshot
- disabled
-
-on property:persist.vendor.sys.ssr.restart_level=*
- start vendor.ssr_setup
-
-on property:persist.vendor.sys.ssr.enable_ramdumps=1
- write /sys/module/subsystem_restart/parameters/enable_ramdumps 1
- mkdir /data/vendor/wifidump 771 root system
- mkdir /data/vendor/ramdump 771 root system
- mkdir /data/vendor/ssrdump 771 root system
- mkdir /data/vendor/ssrlog 771 root system
- start vendor.ss_ramdump
-
-on property:persist.vendor.sys.ssr.enable_ramdumps=0
- write /sys/module/subsystem_restart/parameters/enable_ramdumps 0
-
-service wpa_supplicant /vendor/bin/hw/wpa_supplicant \
- -O/data/vendor/wifi/wpa/sockets -puse_p2p_group_interface=1 -dd \
- -g@android:wpa_wlan0
- # we will start as root and wpa_supplicant will switch to user wifi
- # after setting up the capabilities required for WEXT
- # user wifi
- # group wifi inet keystore
- interface android.hardware.wifi.supplicant@1.0::ISupplicant default
- interface android.hardware.wifi.supplicant@1.1::ISupplicant default
- class main
- socket wpa_wlan0 dgram 660 wifi wifi
- disabled
- oneshot
-
-on property:init.svc.vendor.hwcomposer-2-3=stopped
- stop ppd
-
-on property:init.svc.vendor.hwcomposer-2-3=running
- start ppd
-
-on property:wlan.driver.status=ok
- # Get the wlan driver/fw version
- start vendor.wlan_sh
-
- # Change permission for dumpstate
- chmod 444 /sys/kernel/wlan/power_stats
-
-service insmod_sh /vendor/bin/init.insmod.sh /vendor/etc/init.insmod.${ro.hardware}.cfg
- class main
- user root
- group root system
- disabled
- oneshot
-
-service vendor.msm_irqbalance /vendor/bin/msm_irqbalance -f /vendor/etc/msm_irqbalance.conf
- socket msm_irqbalance seqpacket 660 root system
- class core
- user root
- group root
- writepid /dev/cpuset/system-background/tasks
-
-service pd_mapper /vendor/bin/pd-mapper
- class core
- user system
- group system
- capabilities NET_BIND_SERVICE
-
-service cnss-daemon /vendor/bin/cnss-daemon -n -l
- class late_start
- user system
- group system inet wifi
-
-service loc_launcher /vendor/bin/loc_launcher
- class late_start
- user gps
- group gps
-
-# bugreport is triggered by holding down volume down, volume up and power
-service bugreport /system/bin/dumpstate -d -p -B -z \
- -o /data/user_de/0/com.android.shell/files/bugreports/bugreport
- class main
- disabled
- oneshot
- keycodes 114 115 116
-
-service vendor.wlan_sh /vendor/bin/init.qcom.wlan.sh
- class main
- user root
- group root
- disabled
- oneshot
-
-# DSDS feature
-# Enable 2nd qcrild when the property set to dsds
-on property:persist.radio.multisim.config=dsds
- start vendor.qcrild2
diff --git a/init.hardware.usb.rc b/init.hardware.usb.rc
deleted file mode 100644
index 9eb5b1e..0000000
--- a/init.hardware.usb.rc
+++ /dev/null
@@ -1,103 +0,0 @@
-#
-# Copyright (C) 2016 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-on early-boot
- mkdir /config/usb_gadget/g1 0770
- mkdir /config/usb_gadget/g1/strings/0x409 0770
- write /config/usb_gadget/g1/bcdUSB 0x0200
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/bcdDevice 0x0440
- write /config/usb_gadget/g1/strings/0x409/serialnumber ${ro.serialno}
- write /config/usb_gadget/g1/strings/0x409/manufacturer ${ro.product.manufacturer}
- write /config/usb_gadget/g1/strings/0x409/product ${ro.product.model}
- mkdir /config/usb_gadget/g1/functions/accessory.gs2
- mkdir /config/usb_gadget/g1/functions/audio_source.gs3
- mkdir /config/usb_gadget/g1/functions/midi.gs5
- mkdir /config/usb_gadget/g1/functions/ffs.adb
- mkdir /config/usb_gadget/g1/functions/ffs.mtp
- mkdir /config/usb_gadget/g1/functions/ffs.ptp
- mkdir /config/usb_gadget/g1/functions/diag.diag
- mkdir /config/usb_gadget/g1/functions/diag.diag_mdm
- mkdir /config/usb_gadget/g1/functions/cser.dun.0
- mkdir /config/usb_gadget/g1/functions/cser.nmea.1
- mkdir /config/usb_gadget/g1/functions/gsi.rmnet
- mkdir /config/usb_gadget/g1/functions/gsi.rndis
- mkdir /config/usb_gadget/g1/functions/gsi.dpl
- mkdir /config/usb_gadget/g1/functions/qdss.qdss
- mkdir /config/usb_gadget/g1/functions/qdss.qdss_mdm
- mkdir /config/usb_gadget/g1/configs/b.1 0770
- mkdir /config/usb_gadget/g1/configs/b.1/strings/0x409 0770
- write /config/usb_gadget/g1/os_desc/b_vendor_code 0x1
- write /config/usb_gadget/g1/os_desc/qw_sign "MSFT100"
- mkdir /dev/usb-ffs 0775 shell shell
- mkdir /dev/usb-ffs/adb 0770 shell shell
- mount functionfs adb /dev/usb-ffs/adb rmode=0770,fmode=0660,uid=2000,gid=2000,no_disconnect=1
- mkdir /dev/usb-ffs/mtp 0770 mtp mtp
- mkdir /dev/usb-ffs/ptp 0770 mtp mtp
- mount functionfs mtp /dev/usb-ffs/mtp rmode=0770,fmode=0660,uid=1024,gid=1024,no_disconnect=1
- mount functionfs ptp /dev/usb-ffs/ptp rmode=0770,fmode=0660,uid=1024,gid=1024,no_disconnect=1
- setprop sys.usb.mtp.device_type 3
- setprop sys.usb.controller "a600000.dwc3"
- symlink /config/usb_gadget/g1/configs/b.1 /config/usb_gadget/g1/os_desc/b.1
- write /sys/module/libcomposite/parameters/disable_l1_for_hs "y"
- write /config/usb_gadget/g1/functions/gsi.rndis/rndis_class_id 1
-
-on property:init.svc.console=running
- write /sys/class/power_supply/usb/moisture_detection_enabled 0
-
-on boot
- setprop sys.usb.configfs 2
-
-on property:sys.usb.config=none && property:sys.usb.configfs=1
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
-
-on charger
- mkdir /config/usb_gadget/g1 0770
- mkdir /config/usb_gadget/g1/strings/0x409 0770
- write /config/usb_gadget/g1/bcdUSB 0x0200
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/bcdDevice 0x0440
- write /config/usb_gadget/g1/strings/0x409/serialnumber ${ro.serialno}
- write /config/usb_gadget/g1/strings/0x409/manufacturer Google
- write /config/usb_gadget/g1/strings/0x409/product Pixel
- mkdir /config/usb_gadget/g1/functions/midi.gs5
- mkdir /config/usb_gadget/g1/configs/b.1 0770
- mkdir /config/usb_gadget/g1/configs/b.1/strings/0x409 0770
- symlink /config/usb_gadget/g1/configs/b.1 /config/usb_gadget/g1/os_desc/b.1
- setprop sys.usb.controller "a600000.dwc3"
-
-on property:ro.bootmode=charger
- setprop sys.usb.config midi
-
-on property:sys.usb.config=midi && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "midi"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x4eea
- symlink /config/usb_gadget/g1/functions/midi.gs5 /config/usb_gadget/g1/configs/b.1/f1
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
diff --git a/init.insmod.sh b/init.insmod.sh
deleted file mode 100755
index c7ac027..0000000
--- a/init.insmod.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/vendor/bin/sh
-
-########################################################
-### init.insmod.cfg format: ###
-### ----------------------------------------------- ###
-### [insmod|setprop|enable/moprobe] [path|prop name] ###
-### ... ###
-########################################################
-
-if [ $# -eq 1 ]; then
- cfg_file=$1
-else
- exit 1
-fi
-
-if [ -f $cfg_file ]; then
- while IFS="|" read -r action arg
- do
- case $action in
- "insmod") insmod $arg ;;
- "setprop") setprop $arg 1 ;;
- "enable") echo 1 > $arg ;;
- "modprobe") modprobe -a -d /vendor/lib/modules $arg ;;
- esac
- done < $cfg_file
-fi
-
-# set property even if there is no insmod config
-# as property value "1" is expected in early-boot trigger
-setprop vendor.all.modules.ready 1
-setprop vendor.all.devices.ready 1
diff --git a/init.logging.rc b/init.logging.rc
deleted file mode 100644
index 969d548..0000000
--- a/init.logging.rc
+++ /dev/null
@@ -1,4 +0,0 @@
-on post-fs-data
- mkdir /data/vendor/modem_dump 0777 system system
- mkdir /data/vendor/radio/diag_logs/logs 0777 system system
- mkdir /data/vendor/radio/extended_logs 0770 system radio
diff --git a/init.mdm.sh b/init.mdm.sh
deleted file mode 100644
index 3ed7ed5..0000000
--- a/init.mdm.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#! /vendor/bin/sh
-
-# Copyright (c) 2013, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# * Neither the name of Linux Foundation nor
-# the names of its contributors may be used to endorse or promote
-# products derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-baseband=`getprop ro.baseband`
-if [ "$baseband" = "mdm" ] || [ "$baseband" = "mdm2" ]; then
- start vendor.mdm_helper
-fi
-
diff --git a/init.msm.usb.configfs.rc b/init.msm.usb.configfs.rc
deleted file mode 100644
index e57f699..0000000
--- a/init.msm.usb.configfs.rc
+++ /dev/null
@@ -1,1216 +0,0 @@
-# Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-# * Neither the name of The Linux Foundation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# USB compositions
-on property:sys.usb.config=none && property:sys.usb.configfs=1
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
-
-on property:sys.usb.config=mass_storage && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "msc"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0xF000
- symlink /config/usb_gadget/g1/functions/mass_storage.0 /config/usb_gadget/g1/configs/b.1/f1
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mass_storage,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=mass_storage,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "adb_msc"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9015
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/mass_storage.0 /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x901D
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x900E
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,rmnet,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,serial_cdev,rmnet,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "Default composition"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9091
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,rmnet && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "Default comp without ADB"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9092
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:vendor.usb.tethering=true
- write /sys/class/net/rndis0/queues/rx-0/rps_cpus ${vendor.usb.rps_mask}
-
-on property:sys.usb.config=rndis
- setprop sys.usb.config rndis,${persist.vendor.usb.config.extra}
-
-on property:sys.usb.config=rndis,none && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0xF00E
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,adb
- setprop sys.usb.config rndis,${persist.vendor.usb.config.extra},adb
-
-on property:sys.usb.config=rndis,none,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,none,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9024
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,diag && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x902C
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,diag,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x902D
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,serial_cdev && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90B3
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,serial_cdev,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,serial_cdev,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90B4
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,serial_cdev,diag && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun_diag"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90B5
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,serial_cdev,diag,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,serial_cdev,diag,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun_diag"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90B6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=mtp,diag && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "mtp_diag"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x901B
- symlink /config/usb_gadget/g1/functions/mtp.gs0 /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp,diag,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=mtp,diag,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "mtp_diag_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x903A
- symlink /config/usb_gadget/g1/functions/mtp.gs0 /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x904A
- write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,qdss,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9060
- write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,rmnet && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_rmnet"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9083
- write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,rmnet,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,qdss,rmnet,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_rmnet_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9084
- write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=rndis,diag,qdss && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_qdss"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9081
- write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=rndis,diag,qdss,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,qdss,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_qdss_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9082
- write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=ncm && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ncm"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0xA4A1
- symlink /config/usb_gadget/g1/functions/ncm.0 /config/usb_gadget/g1/configs/b.1/f1
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=ncm,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=ncm,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ncm_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x908C
- symlink /config/usb_gadget/g1/functions/ncm.0 /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x9004
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,adb,serial_cdev && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,adb,serial_cdev && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_adb_dun"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x901f
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,rmnet,dpl && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_dpl"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90b7
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,rmnet,dpl,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,serial_cdev,rmnet,dpl,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_dpl_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90b8
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f5
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=rndis,diag,dpl && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_dpl"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90bf
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,diag,dpl,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,dpl,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_dpl_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90c0
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=ccid && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ccid"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90CE
- symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f1
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=ccid,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=ccid,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ccid_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90CF
- symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=ccid,diag && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ccid_diag"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90D0
- symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=ccid,diag,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=ccid,diag,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "ccid_diag_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90D1
- symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,rmnet,ccid && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_ccid"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90D2
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,rmnet,ccid,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,serial_cdev,rmnet,ccid,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_ccid_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90D3
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/ccid.ccid /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f5
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,rmnet && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_diag_mdm,qdss_qdss_mdm_dun_dun_mdm_rmnet"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90D7
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/cser.dun.2 /config/usb_gadget/g1/configs/b.1/f6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f7
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,rmnet,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,rmnet,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_diag_mdm,qdss_qdss_mdm_dun_dun_mdm_rmnet_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90D8
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/cser.dun.2 /config/usb_gadget/g1/configs/b.1/f6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f7
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f8
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,dpl,rmnet && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_diag_mdm,qdss_qdss_mdm_dun_dun_mdm_dpl_rmnet"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90DD
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/cser.dun.2 /config/usb_gadget/g1/configs/b.1/f6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f7
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f8
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,dpl,rmnet,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,dpl,rmnet,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_diag_mdm,qdss_qdss_mdm_dun_dun_mdm_dpl_rmnet_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90DE
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/cser.dun.2 /config/usb_gadget/g1/configs/b.1/f6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f7
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f8
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,rmnet,dpl,qdss && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_dpl_qdss"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90DC
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f5
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,rmnet,dpl,qdss,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,serial_cdev,rmnet,dpl,qdss,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun_rmnet_dpl_qdss_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90DB
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f6
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,uac2,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,uac2,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_uac2_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90CA
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/uac2.0 /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,uac2 && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_uac2"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x901C
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/uac2.0 /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,uvc,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,uvc,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_uvc_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90CB
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/uvc.0 /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,uvc && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_uvc"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90DF
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/uvc.0 /config/usb_gadget/g1/configs/b.1/f2
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,uac2,uvc,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,uac2,uvc,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_uac2_uvc_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90CC
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/uac2.0 /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/uvc.0 /config/usb_gadget/g1/configs/b.1/f4
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,uac2,uvc && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_uac2_uvc"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90E0
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/uac2.0 /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/uvc.0 /config/usb_gadget/g1/configs/b.1/f3
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_diag_mdm_qdss_qdss_mdm_dun_dpl_rmnet"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90E4
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f7
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_diag_mdm_qdss_qdss_mdm_dun_dpl_rmnet_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90E5
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.rmnet.inst.name} /config/usb_gadget/g1/configs/b.1/f7
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f8
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_diag_mdm_qdss_qdss_mdm_dun_dpl"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90E6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f7
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,adb && property:sys.usb.configfs=1
- start adbd
-
-on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_diag_mdm_qdss_qdss_mdm_dun_dpl_adb"
- rm /config/usb_gadget/g1/configs/b.1/f1
- rm /config/usb_gadget/g1/configs/b.1/f2
- rm /config/usb_gadget/g1/configs/b.1/f3
- rm /config/usb_gadget/g1/configs/b.1/f4
- rm /config/usb_gadget/g1/configs/b.1/f5
- rm /config/usb_gadget/g1/configs/b.1/f6
- rm /config/usb_gadget/g1/configs/b.1/f7
- rm /config/usb_gadget/g1/configs/b.1/f8
- rm /config/usb_gadget/g1/configs/b.1/f9
- write /config/usb_gadget/g1/idVendor 0x05C6
- write /config/usb_gadget/g1/idProduct 0x90E7
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rndis.func.name}.rndis /config/usb_gadget/g1/configs/b.1/f1
- symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2
- symlink /config/usb_gadget/g1/functions/diag.diag_mdm /config/usb_gadget/g1/configs/b.1/f3
- symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f4
- symlink /config/usb_gadget/g1/functions/qdss.qdss_mdm /config/usb_gadget/g1/configs/b.1/f5
- symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f6
- symlink /config/usb_gadget/g1/functions/${vendor.usb.rmnet.func.name}.${vendor.usb.dpl.inst.name} /config/usb_gadget/g1/configs/b.1/f7
- symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f8
- write /config/usb_gadget/g1/UDC ${sys.usb.controller}
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x4ee7
-
-on property:sys.usb.config=mtp && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x4ee1
-
-on property:sys.usb.config=mtp,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x4ee2
-
-on property:sys.usb.config=ptp && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x4ee5
-
-on property:sys.usb.config=ptp,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x4ee6
-
-on property:sys.usb.config=accessory && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x2d00
-
-on property:sys.usb.config=accessory,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x2d01
-
-on property:sys.usb.config=audio_source && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x2d02
-
-on property:sys.usb.config=audio_source,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x2d03
-
-on property:sys.usb.config=accessory,audio_source && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x2d04
-
-on property:sys.usb.config=accessory,audio_source,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x2d05
-
-on property:sys.usb.config=midi && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x4ee8
-
-on property:sys.usb.config=midi,adb && property:sys.usb.configfs=1
- write /config/usb_gadget/g1/idVendor 0x18d1
- write /config/usb_gadget/g1/idProduct 0x4ee9
-
-on property:vendor.usb.eud=1
- write /config/usb_gadget/g1/configs/b.1/MaxPower 1
- write /sys/module/eud/parameters/enable 1
- write /sys/kernel/debug/pmic-votable/USB_ICL/force_active 1
- write /sys/kernel/debug/pmic-votable/USB_ICL/force_val 500
-
-on property:vendor.usb.eud=0
- write /sys/kernel/debug/pmic-votable/USB_ICL/force_active 0
- write /sys/kernel/debug/pmic-votable/USB_ICL/force_val 0
- write /config/usb_gadget/g1/configs/b.1/MaxPower 0
- write /sys/module/eud/parameters/enable 0
diff --git a/init.power.rc b/init.power.rc
deleted file mode 100644
index 221805a..0000000
--- a/init.power.rc
+++ /dev/null
@@ -1,114 +0,0 @@
-#
-# Copyright (C) 2017 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-on property:sys.boot_completed=1
- # Enable bus-dcvs
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/governor bw_hwmon
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/polling_interval 40
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/mbps_zones "2288 4577 7110 9155 12298 14236 15258"
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/sample_ms 4
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/io_percent 50
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/hist_memory 20
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/hyst_length 10
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/down_thres 30
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/guard_band_mbps 0
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/up_scale 250
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/idle_mbps 1600
- write /sys/devices/platform/soc/soc:qcom,cpu-cpu-llcc-bw/devfreq/soc:qcom,cpu-cpu-llcc-bw/max_freq 14236
-
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/governor bw_hwmon
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/polling_interval 40
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/mbps_zones "1720 2929 3879 5931 6881 7980"
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/sample_ms 4
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/io_percent 80
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/hist_memory 20
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/hyst_length 10
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/down_thres 30
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/guard_band_mbps 0
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/up_scale 250
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/idle_mbps 1600
- write /sys/devices/platform/soc/soc:qcom,cpu-llcc-ddr-bw/devfreq/soc:qcom,cpu-llcc-ddr-bw/max_freq 6881
-
- write /sys/devices/virtual/npu/msm_npu/pwr 1
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/governor bw_hwmon
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/polling_interval 40
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/mbps_zones "1720 2929 3879 5931 6881 7980"
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/sample_ms 4
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/io_percent 80
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/hist_memory 20
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/hyst_length 6
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/down_thres 30
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/guard_band_mbps 0
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/up_scale 250
- write /sys/devices/platform/soc/soc:qcom,npu-npu-ddr-bw/devfreq/soc:qcom,npu-npu-ddr-bw/bw_hwmon/idle_mbps 0
- write /sys/devices/virtual/npu/msm_npu/pwr 0
-
- #Enable mem_latency governor for L3, LLCC, and DDR scaling
- write /sys/devices/platform/soc/soc:qcom,cpu0-cpu-llcc-lat/devfreq/soc:qcom,cpu0-cpu-llcc-lat/governor mem_latency
- write /sys/devices/platform/soc/soc:qcom,cpu0-cpu-llcc-lat/devfreq/soc:qcom,cpu0-cpu-llcc-lat/polling_interval 10
- write /sys/devices/platform/soc/soc:qcom,cpu0-cpu-llcc-lat/devfreq/soc:qcom,cpu0-cpu-llcc-lat/mem_latency/ratio_ceil 400
-
- write /sys/devices/platform/soc/soc:qcom,cpu0-cpu-l3-lat/devfreq/soc:qcom,cpu0-cpu-l3-lat/governor mem_latency
- write /sys/devices/platform/soc/soc:qcom,cpu0-cpu-l3-lat/devfreq/soc:qcom,cpu0-cpu-l3-lat/polling_interval 10
- write /sys/devices/platform/soc/soc:qcom,cpu0-cpu-l3-lat/devfreq/soc:qcom,cpu0-cpu-l3-lat/mem_latency/ratio_ceil 400
-
- write /sys/devices/platform/soc/soc:qcom,cpu0-llcc-ddr-lat/devfreq/soc:qcom,cpu0-llcc-ddr-lat/governor mem_latency
- write /sys/devices/platform/soc/soc:qcom,cpu0-llcc-ddr-lat/devfreq/soc:qcom,cpu0-llcc-ddr-lat/polling_interval 10
- write /sys/devices/platform/soc/soc:qcom,cpu0-llcc-ddr-lat/devfreq/soc:qcom,cpu0-llcc-ddr-lat/mem_latency/ratio_ceil 400
-
- write /sys/devices/platform/soc/soc:qcom,cpu4-cpu-llcc-lat/devfreq/soc:qcom,cpu4-cpu-llcc-lat/governor mem_latency
- write /sys/devices/platform/soc/soc:qcom,cpu4-cpu-llcc-lat/devfreq/soc:qcom,cpu4-cpu-llcc-lat/polling_interval 10
- write /sys/devices/platform/soc/soc:qcom,cpu4-cpu-llcc-lat/devfreq/soc:qcom,cpu4-cpu-llcc-lat/mem_latency/ratio_ceil 400
-
- write /sys/devices/platform/soc/soc:qcom,cpu4-cpu-l3-lat/devfreq/soc:qcom,cpu4-cpu-l3-lat/governor mem_latency
- write /sys/devices/platform/soc/soc:qcom,cpu4-cpu-l3-lat/devfreq/soc:qcom,cpu4-cpu-l3-lat/polling_interval 10
- #Gold L3 ratio ceil is 4000
- write /sys/devices/platform/soc/soc:qcom,cpu4-cpu-l3-lat/devfreq/soc:qcom,cpu4-cpu-l3-lat/mem_latency/ratio_ceil 4000
-
- write /sys/devices/platform/soc/soc:qcom,cpu7-cpu-l3-lat/devfreq/soc:qcom,cpu7-cpu-l3-lat/governor mem_latency
- write /sys/devices/platform/soc/soc:qcom,cpu7-cpu-l3-lat/devfreq/soc:qcom,cpu7-cpu-l3-lat/polling_interval 10
- #Gold+ L3 ratio ceil is 20000
- write /sys/devices/platform/soc/soc:qcom,cpu7-cpu-l3-lat/devfreq/soc:qcom,cpu7-cpu-l3-lat/mem_latency/ratio_ceil 20000
-
- write /sys/devices/platform/soc/soc:qcom,cpu4-llcc-ddr-lat/devfreq/soc:qcom,cpu4-llcc-ddr-lat/governor mem_latency
- write /sys/devices/platform/soc/soc:qcom,cpu4-llcc-ddr-lat/devfreq/soc:qcom,cpu4-llcc-ddr-lat/polling_interval 10
- write /sys/devices/platform/soc/soc:qcom,cpu4-llcc-ddr-lat/devfreq/soc:qcom,cpu4-llcc-ddr-lat/mem_latency/ratio_ceil 400
-
- #Enable userspace governor for L3 cdsp nodes
- write /sys/devices/platform/soc/soc:qcom,cdsp-cdsp-l3-lat/devfreq/soc:qcom,cdsp-cdsp-l3-lat/governor cdspl3
-
- #Enable compute governor for gold latfloor
- write /sys/devices/platform/soc/soc:qcom,cpu4-cpu-ddr-latfloor/devfreq/soc:qcom,cpu4-cpu-ddr-latfloor/governor compute
- write /sys/devices/platform/soc/soc:qcom,cpu4-cpu-ddr-latfloor/devfreq/soc:qcom,cpu4-cpu-ddr-latfloor/polling_interval 10
-
- write /sys/module/lpm_levels/parameters/sleep_disabled 0
-
- # Enable idle state listener
- write /sys/class/drm/card0/device/idle_encoder_mask 1
- write /sys/class/drm/card0/device/idle_timeout_ms 100
-
- chown system system /sys/class/devfreq/soc:qcom,l3-cdsp/userspace/set_freq
-
- #Enable PowerHAL hint processing
- setprop vendor.powerhal.init 1
-
-# Disable console_suspend to get better logging for kernel crashes
-on boot
- write /sys/module/printk/parameters/console_suspend N
-
-# If UART is on, enable console_suspend on boot_complete to save power
-on property:sys.boot_completed=1 && property:init.svc.console=running
- write /sys/module/printk/parameters/console_suspend Y
diff --git a/init.qcom.modem_links.sh b/init.qcom.modem_links.sh
deleted file mode 100644
index 8aba652..0000000
--- a/init.qcom.modem_links.sh
+++ /dev/null
@@ -1,132 +0,0 @@
-#!/system/bin/sh
-# Copyright (c) 2013, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-# * Neither the name of The Linux Foundation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-#
-
-# No path is set up at this point so we have to do it here.
-PATH=/sbin:/system/sbin:/system/bin:/system/xbin
-export PATH
-
-# Check for images and set up symlinks
-cd /firmware/image
-
-# Get the list of files in /firmware/image
-# for which sym links have to be created
-
-fwfiles=`ls modem* adsp* wcnss* mba*`
-
-# Check if the links with similar names
-# have been created in /system/etc/firmware
-
-cd /system/etc/firmware
-linksNeeded=0
-
-# For everyfile in fwfiles check if
-# the corresponding file exists
-for fwfile in $fwfiles; do
-
- # if (condition) does not seem to work
- # with the android shell. Therefore
- # make do with case statements instead.
- # if a file named $fwfile is present
- # no need to create links. If the file
- # with the name $fwfile is not present
- # need to create links.
-
- case `ls $fwfile` in
- $fwfile)
- continue;;
- *)
- # file with $fwfile does not exist
- # need to create links
- linksNeeded=1
- break;;
- esac
-
-done
-
-# symlinks created for qca6714 firmware
-ln -s /firmware/image/athwlan.bin /system/etc/firmware/athwlan.bin
-ln -s /firmware/image/fakeboar.bin /system/etc/firmware/fakeBoardData_AR6004.bin
-ln -s /firmware/image/otp.bin /system/etc/firmware/otp.bin
-ln -s /firmware/image/utf.bin /system/etc/firmware/utf.bin
-
-case $linksNeeded in
- 1)
- cd /firmware/image
-
- case `ls modem.mdt 2>/dev/null` in
- modem.mdt)
- for imgfile in modem*; do
- ln -s /firmware/image/$imgfile /system/etc/firmware/$imgfile 2>/dev/null
- done
- ;;
- *)
- # trying to log here but nothing will be logged since it is
- # early in the boot process. Is there a way to log this message?
- log -p w -t PIL no modem image found;;
- esac
-
- case `ls adsp.mdt 2>/dev/null` in
- adsp.mdt)
- for imgfile in adsp*; do
- ln -s /firmware/image/$imgfile /system/etc/firmware/$imgfile 2>/dev/null
- done
- ;;
- *)
- log -p w -t PIL no adsp image found;;
- esac
-
- case `ls wcnss.mdt 2>/dev/null` in
- wcnss.mdt)
- for imgfile in wcnss*; do
- ln -s /firmware/image/$imgfile /system/etc/firmware/$imgfile 2>/dev/null
- done
- ;;
- *)
- log -p w -t PIL no wcnss image found;;
- esac
-
- case `ls mba.mdt 2>/dev/null` in
- mba.mdt)
- for imgfile in mba*; do
- ln -s /firmware/image/$imgfile /system/etc/firmware/$imgfile 2>/dev/null
- done
- ;;
- *)
- log -p w -t PIL no mba image found;;
- esac
-
- ;;
-
- *)
- # Nothing to do. No links needed
- ;;
-esac
-
-cd /
diff --git a/init.qcom.usb.rc b/init.qcom.usb.rc
deleted file mode 100644
index bebc807..0000000
--- a/init.qcom.usb.rc
+++ /dev/null
@@ -1,1665 +0,0 @@
-# Copyright (c) 2011-2016, 2018 The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# * Neither the name of The Linux Foundation nor
-# the names of its contributors may be used to endorse or promote
-# products derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# controller name can be overridden from boot command line
-on init
- setprop sys.usb.controller ${ro.boot.usbcontroller}
-
-on property:ro.boot.usbcontroller=*
- setprop sys.usb.controller ${ro.boot.usbcontroller}
-
-on charger
- mkdir /dev/usb-ffs 0770 shell shell
- mkdir /dev/usb-ffs/adb 0770 shell shell
- mount configfs none /config
- mkdir /config/usb_gadget/g1 0770 shell shell
- mkdir /config/usb_gadget/g1/strings/0x409 0770 shell shell
- write /config/usb_gadget/g1/bcdUSB 0x0200
- write /config/usb_gadget/g1/os_desc/use 1
- write /config/usb_gadget/g1/strings/0x409/serialnumber ${ro.serialno}
- write /config/usb_gadget/g1/strings/0x409/manufacturer ${ro.product.manufacturer}
- write /config/usb_gadget/g1/strings/0x409/product ${ro.product.model}
- mkdir /config/usb_gadget/g1/functions/mass_storage.0
- mkdir /config/usb_gadget/g1/functions/ffs.adb
- mkdir /config/usb_gadget/g1/configs/b.1 0770 shell shell
- mkdir /config/usb_gadget/g1/configs/b.1/strings/0x409 0770 shell shell
- write /config/usb_gadget/g1/os_desc/b_vendor_code 0x1
- symlink /config/usb_gadget/g1/configs/b.1 /config/usb_gadget/g1/os_desc/b.1
- mount functionfs adb /dev/usb-ffs/adb uid=2000,gid=2000
- write /sys/class/android_usb/android0/f_ffs/aliases adb
- enable vendor.qcom-usb-sh
- start vendor.qcom-usb-sh
- setprop sys.usb.config mass_storage
-
-on boot
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- mkdir /dev/usb-ffs 0770 shell shell
- mkdir /dev/usb-ffs/adb 0770 shell shell
- mount configfs none /config
- mkdir /config/usb_gadget/g1 0770 shell shell
- mkdir /config/usb_gadget/g1/strings/0x409 0770 shell shell
- write /config/usb_gadget/g1/bcdUSB 0x0200
- write /config/usb_gadget/g1/os_desc/use 1
- write /config/usb_gadget/g1/strings/0x409/serialnumber ${ro.serialno}
- write /config/usb_gadget/g1/strings/0x409/manufacturer ${ro.product.manufacturer}
- write /config/usb_gadget/g1/strings/0x409/product ${ro.product.model}
- mkdir /config/usb_gadget/g1/functions/mass_storage.0
- mkdir /config/usb_gadget/g1/functions/mtp.gs0
- mkdir /config/usb_gadget/g1/functions/ptp.gs1
- mkdir /config/usb_gadget/g1/functions/accessory.gs2
- mkdir /config/usb_gadget/g1/functions/audio_source.gs3
- mkdir /config/usb_gadget/g1/functions/midi.gs5
- mkdir /config/usb_gadget/g1/functions/ffs.adb
- mkdir /config/usb_gadget/g1/functions/diag.diag
- mkdir /config/usb_gadget/g1/functions/diag.diag_mdm
- mkdir /config/usb_gadget/g1/functions/cser.dun.0
- mkdir /config/usb_gadget/g1/functions/cser.nmea.1
- mkdir /config/usb_gadget/g1/functions/cser.dun.2
- mkdir /config/usb_gadget/g1/functions/gsi.rmnet
- mkdir /config/usb_gadget/g1/functions/gsi.rndis
- mkdir /config/usb_gadget/g1/functions/gsi.dpl
- mkdir /config/usb_gadget/g1/functions/qdss.qdss
- mkdir /config/usb_gadget/g1/functions/qdss.qdss_mdm
- mkdir /config/usb_gadget/g1/functions/rndis_bam.rndis
- mkdir /config/usb_gadget/g1/functions/rndis.rndis
- mkdir /config/usb_gadget/g1/functions/rmnet_bam.rmnet
- mkdir /config/usb_gadget/g1/functions/rmnet_bam.dpl
- mkdir /config/usb_gadget/g1/functions/rmnet_bam.rmnet_bam_dmux
- mkdir /config/usb_gadget/g1/functions/rmnet_bam.dpl_bam_dmux
- mkdir /config/usb_gadget/g1/functions/ncm.0
- mkdir /config/usb_gadget/g1/functions/ccid.ccid
- mkdir /config/usb_gadget/g1/functions/uac2.0
- mkdir /config/usb_gadget/g1/functions/uvc.0
- mkdir /config/usb_gadget/g1/configs/b.1 0770 shell shell
- mkdir /config/usb_gadget/g1/configs/b.1/strings/0x409 0770 shell shell
- write /config/usb_gadget/g1/os_desc/b_vendor_code 0x1
- write /config/usb_gadget/g1/os_desc/qw_sign "MSFT100"
- symlink /config/usb_gadget/g1/configs/b.1 /config/usb_gadget/g1/os_desc/b.1
- mount functionfs adb /dev/usb-ffs/adb uid=2000,gid=2000
- write /sys/class/android_usb/android0/f_ffs/aliases adb
-
-on load_persist_props_action
- enable vendor.qcom-usb-sh
-
-service vendor.qcom-usb-sh /vendor/bin/init.qcom.usb.sh
- class core
- user root
- oneshot
- disabled
-
-on property:persist.vendor.usb.config=*
- setprop persist.sys.usb.config ${persist.vendor.usb.config}
-
-on boot && property:ro.boot.usbconfigfs=true
- setprop sys.usb.configfs 1
-
-# Following are the parameters required for usb functionality. They provide configurable options like
-# product_id/vendor id and allows specifying required functions:
-#
-# Required parameters:
-#
-# /sys/class/android_usb/android0/enable: Enables/disables usb composition
-# Value: 0 (disable), 1 (enable)
-#
-# /sys/class/android_usb/android0/idVendor: Stores Vendor ID
-# Value: 05c6 (Vendor id for Qualcomm Inc)
-#
-# /sys/class/android_usb/android0/idProduct: Stores Product id corresponding to usb composition
-# Value: 0x9xxx for composite interface, 0xFxxx for single interface
-#
-# /sys/class/android_usb/android0/f_diag/clients: Stores name of clients representing a diag interface.
-# Value: Passed one per interface. e.g. diag[,diag_mdm, diag_qsc, diag_mdm2]
-#
-# /sys/class/android_usb/android0/functions: Stores name of the function drivers used in usb composition.
-# Value: Passed one per function driver. e.g. diag[,adb]
-#
-#Optional parameters:
-#
-# /sys/class/android_usb/android0/f_serial/transports: Stores type of underlying transports used to
-# communicate to serial interface.
-# Value: Passed one per interface. One value represents control and data transport together.
-# e.g. smd[,sdio,tty,hsic]
-# Only required if serial interface is present.
-#
-# /sys/class/android_usb/android0/f_serial/transport_names: Stores name of the underlying transports
-# used to communicate to serial interface. This is used to distinguish between more than one interface
-# using same transport type.
-# Value: Passed one per interface. One value represents control and data transport together.
-# e.g. serial_hsic[,serial_hsusb]
-# Only required for transport type hsic, optional for other transport types.
-#
-# /sys/class/android_usb/android0/f_rmnet/transports: Stores type of underlying transports used to
-# communicate to rmnet interface.
-# Value: Passed two per interface as control, data transport type pair.
-# e.g. smd,bam[,hsuart,hsuart]
-# Only required if rmnet interface is present.
-#
-# /sys/class/android_usb/android0/f_rmnet/transport_names: Stores name of the underlying transports
-# used to communicate to rmnet interface. This is used to distinguish between more than one interface
-# using same transport type.
-# Value: Passed one per interface. One value represents control and data transport together.
-# e.g. rmnet_hsic[,rmnet_hsusb]
-# Only required for transport type hsic, optional for other transport types.
-
-# USB compositions
-on property:sys.usb.config=diag,serial_tty,serial_smd && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9002
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports tty,smd
- write /sys/class/android_usb/android0/functions diag,serial
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_tty,serial_smd,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9020
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/functions diag,adb,serial
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 901D
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 900E
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_bam,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9091
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9091
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_bam && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9092
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/functions diag,serial,rmnet
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9092
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam
- write /sys/class/android_usb/android0/functions diag,serial,rmnet
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9025
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports char_bridge,tty
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9026
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports char_bridge,tty
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_bam,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9025
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,acm_smd,acm_tty,rmnet_bam,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903D
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_acm/acm_transports smd,tty
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_bam,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9026
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,acm_smd,acm_tty,rmnet_bam,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903E
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_acm/acm_transports smd,tty
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,serial_sdio,serial_smd,rmnet_smd_sdio,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9037
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports sdio,smd
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet_smd_sdio,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,acm_sdio,acm_smd,rmnet_smd_sdio,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903B
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_acm/acm_transports sdio,smd
- write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet_smd_sdio,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,serial_sdio,serial_smd,rmnet_smd_sdio,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9038
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports sdio,smd
- write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd_sdio,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,acm_sdio,acm_smd,rmnet_smd_sdio,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903C
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_acm/acm_transports sdio,smd
- write /sys/class/android_usb/android0/functions diag,acm,rmnet_smd_sdio,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,serial_sdio,serial_tty,rmnet_sdio,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9031
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports sdio,tty
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet_sdio,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,acm_sdio,acm_tty,rmnet_sdio,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903B
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_acm/acm_transports sdio,tty
- write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet_sdio,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,serial_sdio,serial_tty,rmnet_sdio,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9032
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports sdio,tty
- write /sys/class/android_usb/android0/functions diag,serial,rmnet_sdio,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,acm_sdio,acm_tty,rmnet_sdio,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903C
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_acm/acm_transports sdio,tty
- write /sys/class/android_usb/android0/functions diag,acm,rmnet_sdio,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_tty,serial_tty,rmnet_smd,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9025
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports tty,tty
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet_smd,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- start vendor.port-bridge
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,acm_tty,acm_tty,rmnet_smd,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903D
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_acm/acm_transports tty,tty
- write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet_smd,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- start vendor.port-bridge
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_tty,serial_tty,rmnet_smd,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9026
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports tty,tty
- write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start vendor.port-bridge
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,acm_tty,acm_tty,rmnet_smd,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903E
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_acm/acm_transports tty,tty
- write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_smd,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9025
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet_smd,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,acm_smd,acm_tty,rmnet_smd,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903D
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_acm/acm_transports smd,tty
- write /sys/class/android_usb/android0/functions diag,adb,acm,rmnet_smd,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- start vendor.port-bridge
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_smd,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9026
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,acm_smd,acm_tty,rmnet_smd,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903E
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_acm/acm_transports smd,tty
- write /sys/class/android_usb/android0/functions diag,serial,rmnet_smd,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-# RmNet using USB BAM to IPA BAM
-on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_ipa,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9025
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_ipa,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9026
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_ipa,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9091
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_ipa && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9092
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,serial,rmnet
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 3 composition
-on property:sys.usb.config=diag,serial_hsic,serial_tty,rmnet_hsic,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9025
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports hsic,tty
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic
- write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384
- write /sys/module/mdm_bridge/parameters/max_rx_urbs 20
- write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384
- write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 3 composition with diag_mdm and adb
-on property:sys.usb.config=diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9031
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports hsic,tty
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic
- write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384
- write /sys/module/mdm_bridge/parameters/max_rx_urbs 20
- write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384
- write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 3 composition with diag_mdm
-on property:sys.usb.config=diag,diag_mdm,serial_hsic,serial_tty,rmnet_hsic,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9032
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports hsic,tty
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic
- write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384
- write /sys/module/mdm_bridge/parameters/max_rx_urbs 20
- write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384
- write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 3 DSDA composition with adb
-on property:sys.usb.config=diag,diag_mdm,diag_qsc,serial_hsic,serial_hsuart,rmnet_hsic,rmnet_hsuart,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9065
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc
- write /sys/class/android_usb/android0/f_serial/transports hsic,hsuart
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic,serial_hsuart
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic,hsuart,hsuart
- write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic,rmnet_hsuart
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384
- write /sys/module/mdm_bridge/parameters/max_rx_urbs 20
- write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384
- write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 3 DSDA composition without adb
-on property:sys.usb.config=diag,diag_mdm,diag_qsc,serial_hsic,serial_hsuart,rmnet_hsic,rmnet_hsuart,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9066
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc
- write /sys/class/android_usb/android0/f_serial/transports hsic,hsuart
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic,serial_hsuart
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic,hsuart,hsuart
- write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic,rmnet_hsuart
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384
- write /sys/module/mdm_bridge/parameters/max_rx_urbs 20
- write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384
- write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 3 DSDA2 composition with adb
-on property:sys.usb.config=diag,diag_mdm,diag_mdm2,serial_hsic,serial_hsusb,rmnet_hsic,rmnet_hsusb,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9065
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_mdm2
- write /sys/class/android_usb/android0/f_serial/transports hsic,hsic
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic,serial_hsusb
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic,hsic,hsic
- write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic,rmnet_hsusb
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384
- write /sys/module/mdm_bridge/parameters/max_rx_urbs 20
- write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384
- write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 3 DSDA2 composition without adb
-on property:sys.usb.config=diag,diag_mdm,diag_mdm2,serial_hsic,serial_hsusb,rmnet_hsic,rmnet_hsusb,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9066
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_mdm2
- write /sys/class/android_usb/android0/f_serial/transports hsic,hsic
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic,serial_hsusb
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic,hsic,hsic
- write /sys/class/android_usb/android0/f_rmnet/transport_names rmnet_hsic,rmnet_hsusb
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/module/mdm_bridge/parameters/rx_rmnet_buffer_size 16384
- write /sys/module/mdm_bridge/parameters/max_rx_urbs 20
- write /sys/module/g_android/parameters/ghsic_data_rx_req_size 16384
- write /sys/module/g_android/parameters/ghsic_data_rmnet_rx_q_size 20
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion PCIe composition with diag_mdm and adb
-# Serial & RmNet bridged in userspace with tty and qti/ether
-on property:sys.usb.config=diag,diag_mdm,serial_tty,rmnet_qti_ether,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9035
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports tty
- write /sys/class/android_usb/android0/f_rmnet/transports qti,ether
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion PCIe composition with diag_mdm
-# Serial & RmNet bridged in userspace with tty and qti/ether
-on property:sys.usb.config=diag,diag_mdm,serial_hsic,rmnet_hsic,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9036
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports tty
- write /sys/class/android_usb/android0/f_rmnet/transports qti,ether
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion HSIC/PCIe Hybrid composition with diag_mdm and adb
-# RmNet is bridged over PCIe using qti,ether ctrl/data transports
-on property:sys.usb.config=diag,diag_mdm,serial_hsic,rmnet_qti_ether,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9035
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports hsic
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic
- write /sys/class/android_usb/android0/f_rmnet/transports qti,ether
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion HSIC/PCIe Hybrid composition with diag_mdm
-# RmNet is bridged over PCIe using qti,ether ctrl/data transports
-on property:sys.usb.config=diag,diag_mdm,serial_hsic,rmnet_hsic,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9036
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports hsic
- write /sys/class/android_usb/android0/f_serial/transport_names serial_hsic
- write /sys/class/android_usb/android0/f_rmnet/transports qti,ether
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion PCIe composition with diag_mdm
-# Serial & RmNet bridged in userspace with port bridge and qti/ether
-on property:sys.usb.config=diag,diag_mdm,serial_cdev,rmnet_qti_ether,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9036
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports char_bridge
- write /sys/class/android_usb/android0/f_rmnet/transports qti,ether
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,serial_cdev,rmnet_qti_ether,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9035
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports char_bridge
- write /sys/class/android_usb/android0/f_rmnet/transports qti,ether
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 2.2 composition with diag_qsc and adb
-on property:sys.usb.config=diag,diag_qsc,serial_smd,serial_tty,serial_hsuart,rmnet_hsuart,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9053
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_qsc
- write /sys/class/android_usb/android0/f_serial/transports smd,tty,hsuart
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam,hsuart,hsuart
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# Fusion 2.2 composition with diag_qsc
-on property:sys.usb.config=diag,diag_qsc,serial_smd,serial_tty,serial_hsuart,rmnet_hsuart,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9054
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_qsc
- write /sys/class/android_usb/android0/f_serial/transports smd,tty,hsuart
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam,hsuart,hsuart
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:vendor.usb.tethering=true
- write /sys/class/net/rndis0/queues/rx-0/rps_cpus ${vendor.usb.rps_mask}
-
-on property:sys.usb.config=rndis
- setprop sys.usb.config rndis,${persist.vendor.usb.config.extra}
-
-on property:sys.usb.config=rndis,none && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct F00E
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/functions rndis
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,adb && property:sys.usb.configfs=0
- setprop sys.usb.config rndis,${persist.vendor.usb.config.extra},adb
-
-on property:sys.usb.config=rndis,none,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9024
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/functions rndis,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,diag && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 902C
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions rndis,diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,diag,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 902D
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions rndis,diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state rndis,adb
-
-# DPL is implemented using QDSS
-on property:sys.usb.config=rndis,diag,dpl && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90BF
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions rndis,diag,qdss
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state rndis
-
-# DPL is implemented using QDSS
-on property:sys.usb.config=rndis,diag,dpl,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90C0
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions rndis,diag,qdss,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,serial_smd && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B3
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/functions rndis,serial
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,serial_smd,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B4
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/functions rndis,serial,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,serial_smd,diag && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B5
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/functions rndis,serial,diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,serial_smd,diag,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B6
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/functions rndis,serial,diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,serial_cdev,diag && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B5
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports char_bridge
- write /sys/class/android_usb/android0/functions rndis,serial,diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,serial_cdev,diag,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B6
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports char_bridge
- write /sys/class/android_usb/android0/functions rndis,serial,diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,diag,diag_mdm && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9041
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/functions rndis,diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,diag,diag_mdm,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9042
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/functions rndis,diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=rndis,diag,diag_mdm,diag_qsc && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9086
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc
- write /sys/class/android_usb/android0/functions rndis,diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state rndis
-
-on property:sys.usb.config=rndis,diag,diag_mdm,diag_qsc,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9087
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc
- write /sys/class/android_usb/android0/functions rndis,diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state rndis,adb
-
-on property:sys.usb.config=ptp && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 904D
- write /sys/class/android_usb/android0/functions ptp
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=ptp,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 904E
- write /sys/class/android_usb/android0/functions ptp,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct F003
- write /sys/class/android_usb/android0/functions mtp
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9039
- write /sys/class/android_usb/android0/functions mtp,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp,diag && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 901B
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions mtp,diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp,diag,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903A
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions mtp,diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp,diag,diag_mdm && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9040
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/functions mtp,diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp,diag,diag_mdm,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 903F
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/functions mtp,diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp,diag,diag_mdm,diag_qsc && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9088
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc
- write /sys/class/android_usb/android0/functions mtp,diag
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mtp,diag,diag_mdm,diag_qsc,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9089
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm,diag_qsc
- write /sys/class/android_usb/android0/functions mtp,diag,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,ccid && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9045
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/functions diag,ccid
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,ccid,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9044
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/functions diag,adb,ccid
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9015
- write /sys/class/android_usb/android0/functions adb,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-#Mass-storage only composition
-on property:sys.usb.config=mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct F000
- write /sys/class/android_usb/android0/functions mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 904A
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9060
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9099
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9098
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,rmnet_bam && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9083
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,rmnet
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,rmnet_qti_bam && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9083
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,rmnet
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,rmnet_bam,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9084
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet
- write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,rmnet_qti_bam,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9084
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet
- write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,rmnet_ipa && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9083
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,rmnet
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,qdss,rmnet_ipa,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9084
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet
- write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss,rmnet_hsic && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 909B
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,rmnet
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss,rmnet_hsic,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 909A
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet
- write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss_apq,qdss_mdm,rmnet_hsic && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90A3
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports bam,hsic
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam,qdss_hsic
- write /sys/class/android_usb/android0/functions diag,qdss,rmnet
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,qdss_apq,qdss_mdm,rmnet_hsic,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90A2
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_rmnet/transports hsic,hsic
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports bam,hsic
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam,qdss_hsic
- write /sys/class/android_usb/android0/functions diag,qdss,adb,rmnet
- write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=rndis,diag,qdss && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9081
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions rndis,diag,qdss
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=rndis,diag,qdss,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 9082
- write /sys/class/android_usb/android0/f_rndis/wceis 1
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_qdss/debug_intf 1
- write /sys/class/android_usb/android0/f_qdss/transports bam
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/functions rndis,diag,qdss,adb
- write /sys/module/dwc3/parameters/tx_fifo_resize_enable 1
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# same as 9025, plus data packet logging (DPL) using QDSS
-on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_ipa,mass_storage,dpl,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90AD
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
-# DPL is implemented using QDSS
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage,qdss
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-# same as 9026, plus data packet logging (DPL)
-on property:sys.usb.config=diag,serial_smd,serial_tty,rmnet_ipa,mass_storage,dpl && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B0
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
-# DPL is implemented using QDSS
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage,qdss
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,dpl,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90AD
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports char_bridge,tty
-# DPL is implemented using QDSS
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,mass_storage,qdss
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,dpl && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B0
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports char_bridge,tty
-# DPL is implemented using QDSS
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,mass_storage,qdss
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=ncm && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 0525
- write /sys/class/android_usb/android0/idProduct A4A1
- write /sys/class/android_usb/android0/functions ncm
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=ncm,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 908C
- write /sys/class/android_usb/android0/functions ncm,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=charging && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct F006
- write /sys/class/android_usb/android0/functions charging
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam,dpl_qti_bam_dmux && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B7
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam_dmux
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam,dpl_qti_bam_dmux,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B8
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam_dmux
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_cnss,serial_smd,serial_tty,rmnet_bam,mass_storage,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B2
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_cnss
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/functions diag,diag_cnss,adb,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_cnss,serial_smd,serial_tty,rmnet_bam,mass_storage && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B3
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_cnss
- write /sys/class/android_usb/android0/f_serial/transports smd,tty
- write /sys/class/android_usb/android0/f_rmnet/transports smd,bam
- write /sys/class/android_usb/android0/functions diag,diag_cnss,serial,rmnet,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=midi && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90BA
- write /sys/class/android_usb/android0/functions midi
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=midi,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90BB
- write /sys/class/android_usb/android0/functions midi,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_ipa,dpl && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B7
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
-# DPL is implemented using QDSS
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,serial_smd,rmnet_ipa,dpl,adb && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/iSerial ${ro.serialno}
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90B8
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/f_serial/transports smd
-# DPL is implemented using QDSS
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_bam
- write /sys/class/android_usb/android0/f_rmnet/transports qti,bam2bam_ipa
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss,adb
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,serial_tty,rmnet_qti_ether,dpl_ether,mass_storage,adb
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90AE
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports tty
- write /sys/class/android_usb/android0/f_rmnet/transports qti,ether
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,ether
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_dpl
- write /sys/class/android_usb/android0/functions diag,adb,serial,rmnet,qdss,mass_storage
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,diag_mdm,serial_tty,rmnet_qti_ether,dpl_ether,mass_storage
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90AF
- write /sys/class/android_usb/android0/f_diag/clients diag,diag_mdm
- write /sys/class/android_usb/android0/f_serial/transports tty
- write /sys/class/android_usb/android0/f_rmnet/transports qti,ether
- write /sys/class/android_usb/android0/f_qdss/debug_intf 0
- write /sys/class/android_usb/android0/f_qdss/transports qti,ether
- write /sys/class/android_usb/android0/f_qdss/transport_names qdss_dpl
- write /sys/class/android_usb/android0/functions diag,serial,rmnet,qdss,mass_storage
- write /sys/class/android_usb/android0/enable 1
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,adb,uac2
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90CA
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions diag,adb,uac2_func
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,adb,video && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90CB
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions diag,adb,video
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
-on property:sys.usb.config=diag,adb,uac2,video && property:sys.usb.configfs=0
- write /sys/class/android_usb/android0/enable 0
- write /sys/class/android_usb/android0/idVendor 05C6
- write /sys/class/android_usb/android0/idProduct 90CC
- write /sys/class/android_usb/android0/f_diag/clients diag
- write /sys/class/android_usb/android0/functions diag,adb,uac2_func,video
- write /sys/class/android_usb/android0/enable 1
- start adbd
- setprop sys.usb.state ${sys.usb.config}
-
diff --git a/init.qcom.usb.sh b/init.qcom.usb.sh
deleted file mode 100644
index 081a125..0000000
--- a/init.qcom.usb.sh
+++ /dev/null
@@ -1,245 +0,0 @@
-#!/vendor/bin/sh
-# Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-# * Neither the name of The Linux Foundation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-#
-
-# Set platform variables
-if [ -f /sys/devices/soc0/hw_platform ]; then
- soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
-else
- soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
-fi
-
-if [ -f /sys/devices/soc0/machine ]; then
- soc_machine=`cat /sys/devices/soc0/machine` 2> /dev/null
-else
- soc_machine=`cat /sys/devices/system/soc/soc0/machine` 2> /dev/null
-fi
-
-#
-# Check ESOC for external MDM
-#
-# Note: currently only a single MDM is supported
-#
-if [ -d /sys/bus/esoc/devices ]; then
-for f in /sys/bus/esoc/devices/*; do
- if [ -d $f ]; then
- if [ `grep -e "^MDM" -e "^SDX" $f/esoc_name` ]; then
- esoc_link=`cat $f/esoc_link`
- break
- fi
- fi
-done
-fi
-
-target=`getprop ro.board.platform`
-
-# soc_ids for 8937
-if [ -f /sys/devices/soc0/soc_id ]; then
- soc_id=`cat /sys/devices/soc0/soc_id`
-else
- soc_id=`cat /sys/devices/system/soc/soc0/id`
-fi
-
-#
-# Allow USB enumeration with default PID/VID
-#
-baseband=`getprop ro.baseband`
-
-echo 1 > /sys/class/android_usb/f_mass_storage/lun/nofua
-usb_config=`getprop persist.vendor.usb.config`
-if [ "$usb_config" == "" ]; then #USB persist config not set, select default configuration
- if [ "$esoc_link" != "" ]; then
- setprop persist.vendor.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
- else
- case "$baseband" in
- "apq")
- setprop persist.vendor.usb.config diag,adb
- ;;
- *)
- case "$soc_hwplatform" in
- "Dragon" | "SBC")
- setprop persist.vendor.usb.config diag,adb
- ;;
- *)
- soc_machine=${soc_machine:0:3}
- case "$soc_machine" in
- "SDA")
- setprop persist.vendor.usb.config diag,adb
- ;;
- *)
- case "$target" in
- "msm8996")
- setprop persist.vendor.usb.config diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb
- ;;
- "msm8909")
- setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb
- ;;
- "msm8937")
- if [ -d /config/usb_gadget ]; then
- setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
- else
- case "$soc_id" in
- "313" | "320")
- echo BAM2BAM_IPA > /sys/class/android_usb/android0/f_rndis_qc/rndis_transports
- setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb
- ;;
- *)
- setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb
- ;;
- esac
- fi
- ;;
- "msm8953")
- if [ -d /config/usb_gadget ]; then
- setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
- else
- setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb
- fi
- ;;
- "msm8998" | "sdm660" | "apq8098_latv")
- setprop persist.vendor.usb.config diag,serial_cdev,rmnet,adb
- ;;
- "sdm845" | "sdm710")
- setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
- ;;
- #"lito")
- # setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,qdss,adb
- #;;
- *)
- setprop persist.vendor.usb.config diag,adb
- ;;
- esac
- ;;
- esac
- ;;
- esac
- ;;
- esac
- fi
-fi
-
-# set device mode notification to USB driver for SA8150 Auto ADP
-product=`getprop ro.build.product`
-
-case "$product" in
- "lito_au")
- echo peripheral > /sys/bus/platform/devices/a600000.ssusb/mode
- ;;
- *)
- ;;
-esac
-
-# check configfs is mounted or not
-if [ -d /config/usb_gadget ]; then
- # Chip-serial is used for unique MSM identification in Product string
- msm_serial=`cat /sys/devices/soc0/serial_number`;
- msm_serial_hex=`printf %08X $msm_serial`
- machine_type=`cat /sys/devices/soc0/machine`
- product_string="$machine_type-$soc_hwplatform _SN:$msm_serial_hex"
- echo "$product_string" > /config/usb_gadget/g1/strings/0x409/product
-
- # ADB requires valid iSerialNumber; if ro.serialno is missing, use dummy
- serialnumber=`cat /config/usb_gadget/g1/strings/0x409/serialnumber` 2> /dev/null
- if [ "$serialnumber" == "" ]; then
- serialno=1234567
- echo $serialno > /config/usb_gadget/g1/strings/0x409/serialnumber
- fi
-fi
-
-#
-# Initialize RNDIS Diag option. If unset, set it to 'none'.
-#
-diag_extra=`getprop persist.vendor.usb.config.extra`
-if [ "$diag_extra" == "" ]; then
- setprop persist.vendor.usb.config.extra none
-fi
-
-# enable rps cpus on msm8937 target
-setprop vendor.usb.rps_mask 0
-case "$soc_id" in
- "294" | "295" | "353" | "354")
- setprop vendor.usb.rps_mask 40
- ;;
-esac
-
-#
-# Initialize UVC conifguration.
-#
-if [ -d /config/usb_gadget/g1/functions/uvc.0 ]; then
- cd /config/usb_gadget/g1/functions/uvc.0
-
- echo 3072 > streaming_maxpacket
- echo 1 > streaming_maxburst
- mkdir control/header/h
- ln -s control/header/h control/class/fs/
- ln -s control/header/h control/class/ss
-
- mkdir -p streaming/uncompressed/u/360p
- echo "666666\n1000000\n5000000\n" > streaming/uncompressed/u/360p/dwFrameInterval
-
- mkdir -p streaming/uncompressed/u/720p
- echo 1280 > streaming/uncompressed/u/720p/wWidth
- echo 720 > streaming/uncompressed/u/720p/wWidth
- echo 29491200 > streaming/uncompressed/u/720p/dwMinBitRate
- echo 29491200 > streaming/uncompressed/u/720p/dwMaxBitRate
- echo 1843200 > streaming/uncompressed/u/720p/dwMaxVideoFrameBufferSize
- echo 5000000 > streaming/uncompressed/u/720p/dwDefaultFrameInterval
- echo "5000000\n" > streaming/uncompressed/u/720p/dwFrameInterval
-
- mkdir -p streaming/mjpeg/m/360p
- echo "666666\n1000000\n5000000\n" > streaming/mjpeg/m/360p/dwFrameInterval
-
- mkdir -p streaming/mjpeg/m/720p
- echo 1280 > streaming/mjpeg/m/720p/wWidth
- echo 720 > streaming/mjpeg/m/720p/wWidth
- echo 29491200 > streaming/mjpeg/m/720p/dwMinBitRate
- echo 29491200 > streaming/mjpeg/m/720p/dwMaxBitRate
- echo 1843200 > streaming/mjpeg/m/720p/dwMaxVideoFrameBufferSize
- echo 5000000 > streaming/mjpeg/m/720p/dwDefaultFrameInterval
- echo "5000000\n" > streaming/mjpeg/m/720p/dwFrameInterval
-
- echo 0x04 > /config/usb_gadget/g1/functions/uvc.0/streaming/mjpeg/m/bmaControls
-
- mkdir -p streaming/h264/h/960p
- echo 1920 > streaming/h264/h/960p/wWidth
- echo 960 > streaming/h264/h/960p/wWidth
- echo 40 > streaming/h264/h/960p/bLevelIDC
- echo "333667\n" > streaming/h264/h/960p/dwFrameInterval
-
- mkdir -p streaming/h264/h/1920p
- echo "333667\n" > streaming/h264/h/1920p/dwFrameInterval
-
- mkdir streaming/header/h
- ln -s streaming/uncompressed/u streaming/header/h
- ln -s streaming/mjpeg/m streaming/header/h
- ln -s streaming/h264/h streaming/header/h
- ln -s streaming/header/h streaming/class/fs/
- ln -s streaming/header/h streaming/class/hs/
- ln -s streaming/header/h streaming/class/ss/
-fi
diff --git a/init.qcom.wlan.sh b/init.qcom.wlan.sh
deleted file mode 100644
index 92dd25b..0000000
--- a/init.qcom.wlan.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#! /vendor/bin/sh
-
-wlan_driver_version=`cat /sys/kernel/wlan/wlan/driver_version`
-setprop vendor.wlan.driver.version "${wlan_driver_version:0:91}"
-wlan_fw_version=`cat /sys/kernel/wlan/fw/1/version`
-setprop vendor.wlan.firmware.version "${wlan_fw_version:0:91}"
diff --git a/init.qti.getbootdevice.sh b/init.qti.getbootdevice.sh
deleted file mode 100644
index fa6f740..0000000
--- a/init.qti.getbootdevice.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/vendor/bin/sh
-# Copyright (c) 2018, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-# * Neither the name of The Linux Foundation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-#
-#Script to find if the boot device is SD card or UFS
-
-
-echo "Bootdevice setup: Starting..." > /dev/kmsg
-
-bootdevice=`getprop ro.boot.bootdevice`
-
-if [ "$bootdevice" = "8804000.sdhci" ]; then
- ln -s /dev/block/platform/soc/8804000.sdhci /dev/block/bootdevice
- echo "Waiting for SDHCI device to show up..." > /dev/kmsg
- while [ ! -e "/dev/block/platform/soc/8804000.sdhci" ]; do
- sleep 1
- done
-elif [ "$bootdevice" = "1d84000.ufshc" ]; then
- ln -s /dev/block/platform/soc/1d84000.ufshc /dev/block/bootdevice
- echo "Waiting for UFS device to show up..." > /dev/kmsg
- while [ ! -e "/dev/block/platform/soc/1d84000.ufshc" ]; do
- sleep 1;
- done
-else
- while true; do
- echo "Boot failure - invalid bootdevice ($bootdevice)" > /dev/kmsg
- sleep 30;
- done
-fi
-echo "Bootdevice setup: Completed ($bootdevice)" > /dev/kmsg
diff --git a/init.qti.qseecomd.sh b/init.qti.qseecomd.sh
deleted file mode 100644
index eb2eec9..0000000
--- a/init.qti.qseecomd.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/vendor/bin/sh
-# Copyright (c) 2017, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-# * Neither the name of The Linux Foundation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-#
-
-while [ "$registered" != "true" ]
-do
- sleep 0.1
- registered="`getprop vendor.sys.listeners.registered`"
-done
diff --git a/init.radio.sh b/init.radio.sh
deleted file mode 100644
index df54a66..0000000
--- a/init.radio.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#! /vendor/bin/sh
-
-#
-# Copy qcril.db if needed for RIL
-#
-if [ -f /vendor/radio/qcril_database/qcril.db -a ! -f /data/vendor/radio/qcril.db ]; then
- cp /vendor/radio/qcril_database/qcril.db /data/vendor/radio/qcril.db
- chown -h radio.radio /data/vendor/radio/qcril.db
-fi
-echo 1 > /data/vendor/radio/db_check_done
-
-cp /vendor/radio/qcril_database/qcril.db /data/vendor/radio/qcril_prebuilt.db
-chown radio.radio /data/vendor/radio/qcril_prebuilt.db
-chmod 0660 /data/vendor/radio/qcril_prebuilt.db
-
-#
-# Make modem config folder and copy firmware config to that folder for RIL
-#
-if [ -f /data/vendor/radio/ver_info.txt ]; then
- prev_version_info=`cat /data/vendor/radio/ver_info.txt`
-else
- prev_version_info=""
-fi
-
-cur_version_info=`cat /vendor/firmware_mnt/verinfo/ver_info.txt`
-if [ ! -f /vendor/firmware_mnt/verinfo/ver_info.txt -o "$prev_version_info" != "$cur_version_info" ]; then
- rm -rf /data/vendor/radio/modem_config
- mkdir /data/vendor/radio/modem_config
- chmod 770 /data/vendor/radio/modem_config
- cp -r /vendor/firmware_mnt/image/modem_pr/mcfg/configs/* /data/vendor/radio/modem_config
- chown -hR radio.radio /data/vendor/radio/modem_config
- cp /vendor/firmware_mnt/verinfo/ver_info.txt /data/vendor/radio/ver_info.txt
- chown radio.radio /data/vendor/radio/ver_info.txt
-fi
-cp /vendor/firmware_mnt/image/modem_pr/mbn_ota.txt /data/vendor/radio/modem_config
-chown radio.radio /data/vendor/radio/modem_config/mbn_ota.txt
-echo 1 > /data/vendor/radio/copy_complete
-
diff --git a/init.sensors.sh b/init.sensors.sh
deleted file mode 100644
index 6325038..0000000
--- a/init.sensors.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#! /vendor/bin/sh
-
-version=`grep -ao "OEM_IMAGE_VERSION_STRING[ -~]*" \
- /vendor/firmware/slpi.b04 | \
- sed -e s/OEM_IMAGE_VERSION_STRING=SLPI.version.// -e s/\(.*\).//`
-setprop sys.slpi.firmware.version "$version"
diff --git a/json-c/AUTHORS b/json-c/AUTHORS
deleted file mode 100644
index b389989..0000000
--- a/json-c/AUTHORS
+++ /dev/null
@@ -1,5 +0,0 @@
-Michael Clark <michael@metaparadigm.com>
-Jehiah Czebotar <jehiah@gmail.com>
-Eric Haszlakiewicz <hawicz+json-c@gmail.com>
-C. Watford (christopher.watford@gmail.com)
-
diff --git a/json-c/Android.configure.mk b/json-c/Android.configure.mk
deleted file mode 100644
index a6265ad..0000000
--- a/json-c/Android.configure.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-# This file is the top android makefile for all sub-modules.
-
-LOCAL_PATH := $(call my-dir)
-include $(CLEAR_VARS)
-
-json_c_TOP := $(LOCAL_PATH)
-
-JSON_C_BUILT_SOURCES := Android.mk
-
-JSON_C_BUILT_SOURCES := $(patsubst %, $(abspath $(json_c_TOP))/%, $(JSON_C_BUILT_SOURCES))
-
-.PHONY: json-c-configure json-c-configure-real
-json-c-configure-real:
- echo $(JSON_C_BUILT_SOURCES)
- cd $(json_c_TOP) ; \
- $(abspath $(json_c_TOP))/autogen.sh && \
- CC="$(CONFIGURE_CC)" \
- CFLAGS="$(CONFIGURE_CFLAGS)" \
- LD=$(TARGET_LD) \
- LDFLAGS="$(CONFIGURE_LDFLAGS)" \
- CPP=$(CONFIGURE_CPP) \
- CPPFLAGS="$(CONFIGURE_CPPFLAGS)" \
- PKG_CONFIG_LIBDIR=$(CONFIGURE_PKG_CONFIG_LIBDIR) \
- PKG_CONFIG_TOP_BUILD_DIR=/ \
- ac_cv_func_malloc_0_nonnull=yes \
- ac_cv_func_realloc_0_nonnull=yes \
- $(abspath $(json_c_TOP))/$(CONFIGURE) --host=$(CONFIGURE_HOST) \
- --prefix=/system \
- && \
- for file in $(JSON_C_BUILT_SOURCES); do \
- rm -f $$file && \
- make -C $$(dirname $$file) $$(basename $$file) ; \
- done
-
-json-c-configure: json-c-configure-real
-
-PA_CONFIGURE_TARGETS += json-c-configure
-
--include $(json_c_TOP)/Android.mk
diff --git a/json-c/Android.mk b/json-c/Android.mk
deleted file mode 100644
index 139a10c..0000000
--- a/json-c/Android.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-LIBJSON_ROOT := $(call my-dir)
-include $(CLEAR_VARS)
-LOCAL_MODULE := libjson
-LOCAL_PATH := $(LIBJSON_ROOT)
-LOCAL_C_INCLUDES += $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr/include
-LOCAL_ADDITIONAL_DEPENDENCIES += $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ/usr
-LOCAL_COPY_HEADERS_TO := libjson/inc
-LOCAL_COPY_HEADERS := bits.h \
- config.h \
- debug.h \
- linkhash.h \
- arraylist.h \
- json.h \
- json_config.h \
- json_inttypes.h \
- json_util.h \
- json_object.h \
- json_tokener.h \
- json_object_iterator.h \
- json_c_version.h
-LOCAL_SRC_FILES := arraylist.c \
- debug.c \
- json_c_version.c \
- json_object.c \
- json_object_iterator.c \
- json_tokener.c \
- json_util.c \
- libjson.c \
- linkhash.c \
- printbuf.c \
- random_seed.c
-LOCAL_SHARED_LIBRARIES := libcutils libutils
-LOCAL_MODULE_TAG := optional
-LOCAL_VENDOR_MODULE := true
-include $(BUILD_SHARED_LIBRARY)
diff --git a/json-c/COPYING b/json-c/COPYING
deleted file mode 100644
index 740d125..0000000
--- a/json-c/COPYING
+++ /dev/null
@@ -1,42 +0,0 @@
-
-Copyright (c) 2009-2012 Eric Haszlakiewicz
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute, sublicense,
-and/or sell copies of the Software, and to permit persons to whom the
-Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-
-----------------------------------------------------------------
-
-Copyright (c) 2004, 2005 Metaparadigm Pte Ltd
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute, sublicense,
-and/or sell copies of the Software, and to permit persons to whom the
-Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included
-in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
diff --git a/json-c/ChangeLog b/json-c/ChangeLog
deleted file mode 100644
index 584ed1f..0000000
--- a/json-c/ChangeLog
+++ /dev/null
@@ -1,218 +0,0 @@
-
-NEXT.VERSION
-
- ...nothing yet...
-
-0.12
-
- * Address security issues:
- * CVE-2013-6371: hash collision denial of service
- * CVE-2013-6370: buffer overflow if size_t is larger than int
-
- * Avoid potential overflow in json_object_get_double
-
- * Eliminate the mc_abort() function and MC_ABORT macro.
-
- * Make the json_tokener_errors array local. It has been deprecated for
- a while, and json_tokener_error_desc() should be used instead.
-
- * change the floating point output format to %.17g so values with
- more than 6 digits show up in the output.
-
- * Remove the old libjson.so name compatibility support. The library is
- only created as libjson-c.so now and headers are only installed
- into the ${prefix}/json-c directory.
-
- * When supported by the linker, add the -Bsymbolic-functions flag.
-
- * Various changes to fix the build on MSVC.
-
- * Make strict mode more strict:
- * number must not start with 0
- * no single-quote strings
- * no comments
- * trailing char not allowed
- * only allow lowercase literals
-
- * Added a json_object_new_double_s() convenience function to allow
- an exact string representation of a double to be specified when
- creating the object and use it in json_tokener_parse_ex() so
- a re-serialized object more exactly matches the input.
-
- * Add support NaN and Infinity
-
-
-0.11
-
- * IMPORTANT: the name of the library has changed to libjson-c.so and
- the header files are now in include/json-c.
- The pkgconfig name has also changed from json to json-c.
- You should change your build to use appropriate -I and -l options.
- A compatibility shim is in place so builds using the old name will
- continue to work, but that will be removed in the next release.
- * Maximum recursion depth is now a runtime option.
- json_tokener_new() is provided for compatibility.
- json_tokener_new_ex(depth)
- * Include json_object_iterator.h in the installed headers.
- * Add support for building on Android.
- * Rewrite json_object_object_add to replace just the value if the key already exists so keys remain valid.
- * Make it safe to delete keys while iterating with the json_object_object_foreach macro.
- * Add a json_set_serializer() function to allow the string output of a json_object to be customized.
- * Make float parsing locale independent.
- * Add a json_tokener_set_flags() function and a JSON_TOKENER_STRICT flag.
- * Enable -Werror when building.
- * speed improvements to parsing 64-bit integers on systems with working sscanf
- * Add a json_object_object_length function.
- * Fix a bug (buffer overrun) when expanding arrays to more than 64 entries.
-
-0.10
-
- * Add a json_object_to_json_string_ext() function to allow output to be
- formatted in a more human readable form.
- * Add json_object_object_get_ex(), a NULL-safe get object method, to be able
- to distinguish between a key not present and the value being NULL.
- * Add an alternative iterator implementation, see json_object_iterator.h
- * Make json_object_iter public to enable external use of the
- json_object_object_foreachC macro.
- * Add a printbuf_memset() function to provide an effecient way to set and
- append things like whitespace indentation.
- * Adjust json_object_is_type and json_object_get_type so they return
- json_type_null for NULL objects and handle NULL passed to
- json_objct_object_get().
- * Rename boolean type to json_bool.
- * Fix various compile issues for Visual Studio and MinGW.
- * Allow json_tokener_parse_ex() to be re-used to parse multiple object.
- Also, fix some parsing issues with capitalized hexadecimal numbers and
- number in E notation.
- * Add json_tokener_get_error() and json_tokener_error_desc() to better
- encapsulate the process of retrieving errors while parsing.
- * Various improvements to the documentation of many functions.
- * Add new json_object_array_sort() function.
- * Fix a bug in json_object_get_int(), which would incorrectly return 0
- when called on a string type object.
- Eric Haszlakiewicz
- * Add a json_type_to_name() function.
- Eric Haszlakiewicz
- * Add a json_tokener_parse_verbose() function.
- Jehiah Czebotar
- * Improve support for null bytes within JSON strings.
- Jehiah Czebotar
- * Fix file descriptor leak if memory allocation fails in json_util
- Zachary Blair, zack_blair at hotmail dot com
- * Add int64 support. Two new functions json_object_net_int64 and
- json_object_get_int64. Binary compatibility preserved.
- Eric Haszlakiewicz, EHASZLA at transunion com
- Rui Miguel Silva Seabra, rms at 1407 dot org
- * Fix subtle bug in linkhash where lookup could hang after all slots
- were filled then successively freed.
- Spotted by Jean-Marc Naud, j dash m at newtraxtech dot com
- * Make json_object_from_file take const char *filename
- Spotted by Vikram Raj V, vsagar at attinteractive dot com
- * Add handling of surrogate pairs (json_tokener.c, test4.c, Makefile.am)
- Brent Miller, bdmiller at yahoo dash inc dot com
- * Correction to comment describing printbuf_memappend in printbuf.h
- Brent Miller, bdmiller at yahoo dash inc dot com
-
-0.9
- * Add README.html README-WIN32.html config.h.win32 to Makefile.am
- Michael Clark, <michael@metaparadigm.com>
- * Add const qualifier to the json_tokener_parse functions
- Eric Haszlakiewicz, EHASZLA at transunion dot com
- * Rename min and max so we can never clash with C or C++ std library
- Ian Atha, thatha at yahoo dash inc dot com
- * Fix any noticeable spelling or grammar errors.
- * Make sure every va_start has a va_end.
- * Check all pointers for validity.
- Erik Hovland, erik at hovland dot org
- * Fix json_object_get_boolean to return false for empty string
- Spotted by Vitaly Kruglikov, Vitaly dot Kruglikov at palm dot com
- * optimizations to json_tokener_parse_ex(), printbuf_memappend()
- Brent Miller, bdmiller at yahoo dash inc dot com
- * Disable REFCOUNT_DEBUG by default in json_object.c
- * Don't use this as a variable, so we can compile with a C++ compiler
- * Add casts from void* to type of assignment when using malloc
- * Add #ifdef __cplusplus guards to all of the headers
- * Add typedefs for json_object, json_tokener, array_list, printbuf, lh_table
- Michael Clark, <michael@metaparadigm.com>
- * Null pointer dereference fix. Fix json_object_get_boolean strlen test
- to not return TRUE for zero length string. Remove redundant includes.
- Erik Hovland, erik at hovland dot org
- * Fixed warning reported by adding -Wstrict-prototypes
- -Wold-style-definition to the compilatin flags.
- Dotan Barak, dotanba at gmail dot com
- * Add const correctness to public interfaces
- Gerard Krol, g dot c dot krol at student dot tudelft dot nl
-
-0.8
- * Add va_end for every va_start
- Dotan Barak, dotanba at gmail dot com
- * Add macros to enable compiling out debug code
- Geoffrey Young, geoff at modperlcookbook dot org
- * Fix bug with use of capital E in numbers with exponents
- Mateusz Loskot, mateusz at loskot dot net
- * Add stddef.h include
- * Patch allows for json-c compile with -Werror and not fail due to
- -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations
- Geoffrey Young, geoff at modperlcookbook dot org
-
-0.7
- * Add escaping of backslash to json output
- * Add escaping of foward slash on tokenizing and output
- * Changes to internal tokenizer from using recursion to
- using a depth state structure to allow incremental parsing
-
-0.6
- * Fix bug in escaping of control characters
- Johan Björklund, johbjo09 at kth dot se
- * Remove include "config.h" from headers (should only
- be included from .c files)
- Michael Clark <michael@metaparadigm.com>
-
-0.5
- * Make headers C++ compatible by change *this to *obj
- * Add ifdef C++ extern "C" to headers
- * Use simpler definition of min and max in bits.h
- Larry Lansing, llansing at fuzzynerd dot com
-
- * Remove automake 1.6 requirement
- * Move autogen commands into autogen.sh. Update README
- * Remove error pointer special case for Windows
- * Change license from LGPL to MIT
- Michael Clark <michael@metaparadigm.com>
-
-0.4
- * Fix additional error case in object parsing
- * Add back sign reversal in nested object parse as error pointer
- value is negative, while error value is positive.
- Michael Clark <michael@metaparadigm.com>
-
-0.3
- * fix pointer arithmetic bug for error pointer check in is_error() macro
- * fix type passed to printbuf_memappend in json_tokener
- * update autotools bootstrap instructions in README
- Michael Clark <michael@metaparadigm.com>
-
-0.2
- * printbuf.c - C. Watford (christopher.watford@gmail.com)
- Added a Win32/Win64 compliant implementation of vasprintf
- * debug.c - C. Watford (christopher.watford@gmail.com)
- Removed usage of vsyslog on Win32/Win64 systems, needs to be handled
- by a configure script
- * json_object.c - C. Watford (christopher.watford@gmail.com)
- Added scope operator to wrap usage of json_object_object_foreach, this
- needs to be rethought to be more ANSI C friendly
- * json_object.h - C. Watford (christopher.watford@gmail.com)
- Added Microsoft C friendly version of json_object_object_foreach
- * json_tokener.c - C. Watford (christopher.watford@gmail.com)
- Added a Win32/Win64 compliant implementation of strndup
- * json_util.c - C. Watford (christopher.watford@gmail.com)
- Added cast and mask to suffice size_t v. unsigned int conversion
- correctness
- * json_tokener.c - sign reversal issue on error info for nested object parse
- spotted by Johan Björklund (johbjo09 at kth.se)
- * json_object.c - escape " in json_escape_str
- * Change to automake and libtool to build shared and static library
- Michael Clark <michael@metaparadigm.com>
-
-0.1
- * initial release
diff --git a/json-c/Doxyfile b/json-c/Doxyfile
deleted file mode 100644
index da39aca..0000000
--- a/json-c/Doxyfile
+++ /dev/null
@@ -1,1153 +0,0 @@
-# Doxyfile 1.3.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
-#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-# TAG = value [value, ...]
-# For lists items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME = json-c
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER = 0.12.99
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY = doc
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of source
-# files, where putting all generated files in the same directory would otherwise
-# cause performance problems for the file system.
-
-CREATE_SUBDIRS = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
-# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
-# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
-# Swedish, and Ukrainian.
-
-OUTPUT_LANGUAGE = English
-
-# This tag can be used to specify the encoding used in the generated output.
-# The encoding is not always determined by the language that is chosen,
-# but also whether or not the output is meant for Windows or non-Windows users.
-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
-# forces the Windows encoding (this is the default for the Windows binary),
-# whereas setting the tag to NO uses a Unix-style encoding (the default for
-# all platforms other than Windows).
-
-USE_WINDOWS_ENCODING = NO
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is used
-# as the annotated text. Otherwise, the brief description is used as-is. If left
-# blank, the following values are used ("$name" is automatically replaced with the
-# name of the entity): "The $name class" "The $name widget" "The $name file"
-# "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF =
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
-# members of a class in the documentation of that class as if those members were
-# ordinary class members. Constructors, destructors and assignment operators of
-# the base classes will not be shown.
-
-INLINE_INHERITED_MEMB = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES = YES
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful is your file systems
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like the Qt-style comments (thus requiring an
-# explicit @brief command for a brief description.
-
-JAVADOC_AUTOBRIEF = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen
-# will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member
-# documentation.
-
-DETAILS_AT_TOP = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE = 8
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
-# only. Doxygen will then generate output that is more tailored for Java.
-# For instance, namespaces will be presented as packages, qualified scopes
-# will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING = YES
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC = NO
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES = NO
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES = NO
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or define consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and defines in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET = NO
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text.
-
-WARN_FORMAT = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT =
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
-# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
-
-FILE_PATTERNS = *.h
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE = NO
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE =
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
-# that are symbolic links (a Unix filesystem feature) are excluded from the input.
-
-EXCLUDE_SYMLINKS = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-
-EXCLUDE_PATTERNS =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS =
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output. If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
-# is applied to all files.
-
-FILTER_PATTERNS =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES (the default)
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES (the default)
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION = YES
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX = NO
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX = 5
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER =
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET =
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS = YES
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND = NO
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX = NO
-
-# This tag can be used to set the number of enum values (range [1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-
-ENUM_VALUES_PER_LINE = 4
-
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
-# probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW = NO
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH = 250
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-
-LATEX_CMD_NAME = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = NO
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX = NO
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader. This is useful
-# if you want to understand what is going on. On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_PREDEFINED tags.
-
-EXPAND_ONLY_PREDEF = NO
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed.
-
-PREDEFINED =
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition.
-
-EXPAND_AS_DEFINED =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all function-like macros that are alone
-# on a line, have an all uppercase name, and do not end with a semicolon. Such
-# function macros are typically used for boiler-plate code, and will confuse the
-# parser if not removed.
-
-SKIP_FUNCTION_MACROS = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
-# super classes. Setting the tag to NO turns the diagrams off. Note that this
-# option is superseded by the HAVE_DOT option below. This is only a fallback. It is
-# recommended to install and use dot, since it yields more powerful graphs.
-
-CLASS_DIAGRAMS = YES
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT = NO
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH = YES
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH = YES
-
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
-# generate a call dependency graph for every global function or class method.
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-
-CALL_GRAPH = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found on the path.
-
-DOT_PATH =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS =
-
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than
-# this value, doxygen will try to truncate the graph, so that it fits within
-# the specified constraint. Beware that most browsers cannot cope with very
-# large images.
-
-MAX_DOT_GRAPH_WIDTH = 1024
-
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than
-# this value, doxygen will try to truncate the graph, so that it fits within
-# the specified constraint. Beware that most browsers cannot cope with very
-# large images.
-
-MAX_DOT_GRAPH_HEIGHT = 1024
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes that
-# lay further from the root node will be omitted. Note that setting this option to
-# 1 or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that a graph may be further truncated if the graph's image dimensions are
-# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
-# If 0 is used for the depth value (the default), the graph is not depth-constrained.
-
-MAX_DOT_GRAPH_DEPTH = 0
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE = NO
diff --git a/json-c/Makefile.am b/json-c/Makefile.am
deleted file mode 100644
index 26ced27..0000000
--- a/json-c/Makefile.am
+++ /dev/null
@@ -1,74 +0,0 @@
-include Makefile.am.inc
-
-EXTRA_DIST = README.html README-WIN32.html config.h.win32 doc json-c.vcproj
-SUBDIRS = . tests
-
-lib_LTLIBRARIES = libjson-c.la
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = json-c.pc
-
-libjson_cincludedir = $(includedir)/json-c
-libjson_cinclude_HEADERS = \
- arraylist.h \
- bits.h \
- debug.h \
- json.h \
- json_config.h \
- json_c_version.h \
- json_inttypes.h \
- json_object.h \
- json_object_iterator.h \
- json_object_private.h \
- json_tokener.h \
- json_util.h \
- linkhash.h \
- printbuf.h \
- random_seed.h
-
-#libjsonx_includedir = $(libdir)/json-c-@VERSION@
-#
-#libjsonx_include_HEADERS = \
-# json_config.h
-
-libjson_c_la_LDFLAGS = -version-info 2:0:0 -no-undefined @JSON_BSYMBOLIC_LDFLAGS@
-
-libjson_c_la_SOURCES = \
- arraylist.c \
- debug.c \
- json_c_version.c \
- json_object.c \
- json_object_iterator.c \
- json_tokener.c \
- json_util.c \
- linkhash.c \
- printbuf.c \
- random_seed.c
-
-
-distclean-local:
- -rm -rf $(testsubdir)
- -rm -rf config.h.in~ Makefile.in aclocal.m4 autom4te.cache/ config.guess config.sub depcomp install-sh ltmain.sh missing
- -rm -f INSTALL test-driver tests/Makefile.in compile
-
-maintainer-clean-local:
- -rm -rf configure
-
-uninstall-local:
- rm -rf "$(DESTDIR)@includedir@/json-c"
- rm -f "$(DESTDIR)@includedir@/json"
-
-ANDROID_CFLAGS = -I$(top_srcdir) -DHAVE_CONFIG_H
-
-Android.mk: Makefile.am
- androgenizer -:PROJECT json-c \
- -:SHARED libjson-c \
- -:TAGS eng debug \
- -:REL_TOP $(top_srcdir) -:ABS_TOP $(abs_top_srcdir) \
- -:SOURCES $(libjson_c_la_SOURCES) $(nodist_libjson_c_la_SOURCES) \
- -:CFLAGS $(DEFS) $(ANDROID_CFLAGS) $(libjson_c_la_CFLAGS) \
- -:LDFLAGS $(libjson_c_la_LDFLAGS) $(libjson_c_la_LIBADD) \
- -:HEADER_TARGET json-c \
- -:HEADERS $(libjson_cinclude_HEADERS) \
- -:PASSTHROUGH LOCAL_ARM_MODE:=arm \
- > $@
diff --git a/json-c/Makefile.am.inc b/json-c/Makefile.am.inc
deleted file mode 100644
index fec591b..0000000
--- a/json-c/Makefile.am.inc
+++ /dev/null
@@ -1,2 +0,0 @@
-AM_CFLAGS = -Wall -Werror -Wno-error=deprecated-declarations -Wextra -Wwrite-strings -Wno-unused-parameter -std=gnu99 -D_GNU_SOURCE -D_REENTRANT
-
diff --git a/json-c/README b/json-c/README
deleted file mode 100644
index e69de29..0000000
--- a/json-c/README
+++ /dev/null
diff --git a/json-c/README-WIN32.html b/json-c/README-WIN32.html
deleted file mode 100644
index abdb39e..0000000
--- a/json-c/README-WIN32.html
+++ /dev/null
@@ -1,50 +0,0 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
- <head>
- <title>JSON-C - A JSON implementation in C - Win32 specific notes</title>
- <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
- </head>
- <body>
- <h2>Windows specific notes for JSON-C</h2>
- <p>Please send Win32 bug reports to <a href="mailto:christopher.watford@gmail.com">christopher.watford@gmail.com</a></p>
- <p><b>Win32 Specific Changes:</b></p>
- <ul>
- <li>
- Various functions have been redefined to their Win32 version (i.e. <tt>open</tt>
- on win32 is <tt>_open</tt>)</li>
- <li>
- Implemented missing functions from MS's libc (i.e. <tt>vasprintf</tt>)</li>
- <li>
- Added code to allow Win64 support without integer resizing issues, this
- probably makes it much nicer on 64bit machines everywhere (i.e. using <tt>ptrdiff_t</tt>
- for pointer math)</li>
- </ul>
- <p><b>Porting Changelog:</b></p>
- <dl>
- <dt><tt>printbuf.c</tt> - C. Watford (christopher.watford@gmail.com)</dt>
- <dd>
- Added a Win32/Win64 compliant implementation of <tt>vasprintf</tt></dd>
- <dt><tt>debug.c</tt> - C. Watford (christopher.watford@gmail.com)</dt>
- <dd>
- Removed usage of <tt>vsyslog</tt> on Win32/Win64 systems, needs to be handled
- by a configure script</dd>
- <dt><tt>json_object.c</tt> - C. Watford (christopher.watford@gmail.com)</dt>
- <dd>
- Added scope operator to wrap usage of <tt>json_object_object_foreach</tt>, this needs to be
- rethought to be more ANSI C friendly</dd>
- <dt><tt>json_object.h</tt> - C. Watford (christopher.watford@gmail.com)</dt>
- <dd>
- Added Microsoft C friendly version of <tt>json_object_object_foreach</tt></dd>
- <dt><tt>json_tokener.c</tt> - C. Watford (christopher.watford@gmail.com)</dt>
- <dd>
- Added a Win32/Win64 compliant implementation of <tt>strndup</tt></dd>
- <dt><tt>json_util.c</tt> - C. Watford (christopher.watford@gmail.com)</dt>
- <dd>
- Added cast and mask to suffice <tt>size_t</tt> v. <tt>unsigned int</tt>
- conversion correctness</dd>
- </dl>
- <p>This program is free software; you can redistribute it and/or modify it under
- the terms of the MIT License. See COPYING for details.</p>
- <hr />
- </body>
-</html>
diff --git a/json-c/README.html b/json-c/README.html
deleted file mode 100644
index dc696af..0000000
--- a/json-c/README.html
+++ /dev/null
@@ -1,34 +0,0 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
- <head>
- <title>JSON-C - A JSON implementation in C</title>
- <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
- </head>
- <body>
- <h2>JSON-C - A JSON implementation in C</h2>
-
- <h3>Overview</h3>
- <p>JSON-C implements a reference counting object model that allows you to easily
- construct JSON objects in C, output them as JSON formatted strings and parse
- JSON formatted strings back into the C representation of JSON objects.</p>
-
- <h3>Building</h3>
- <p>To setup JSON-C to build on your system please run <tt>configure</tt> and <tt>make</tt>.</p>
- <p>If you are on Win32 and are not using the VS project file, be sure
- to rename <tt>config.h.win32</tt> to <tt>config.h</tt> before building.</p>
-
- <h3>Documentation</h3>
- <P>Doxygen generated documentation exists <a href="doc/html/json__object_8h.html">here</a>
- and Win32 specific notes can be found <a href="README-WIN32.html">here</a>.</P>
-
- <h3><a href="https://github.com/json-c/json-c">GIT Reposository</a></h3>
- <p><strong><code>git clone https://github.com/json-c/json-c.git</code></strong></p>
-
- <h3><a href="http://groups.google.com/group/json-c">Mailing List</a></h3>
- <pi>Send email to <strong><code>json-c <i><at></i> googlegroups <i><dot></i> com</code></strong></p>
-
- <h3><a href="COPYING">License</a></h3>
- <p>This program is free software; you can redistribute it and/or modify it under the terms of the MIT License..</p>
- <hr/>
- </body>
-</html>
diff --git a/json-c/README.md b/json-c/README.md
deleted file mode 100644
index bf4d2e4..0000000
--- a/json-c/README.md
+++ /dev/null
@@ -1,63 +0,0 @@
-`json-c`
-========
-
-Building on Unix with `git`, `gcc` and `autotools`
---------------------------------------------------
-
-Home page for json-c: https://github.com/json-c/json-c/wiki
-
-Caution: do **NOT** use sources from svn.metaparadigm.com,
-they are old.
-
-Prerequisites:
-
- - `gcc`, `clang`, or another C compiler
- - `libtool`
-
-If you're not using a release tarball, you'll also need:
-
- - `autoconf` (`autoreconf`)
- - `automake`
-
-Make sure you have a complete `libtool` install, including `libtoolize`.
-
-`json-c` GitHub repo: https://github.com/json-c/json-c
-
-```bash
-$ git clone https://github.com/json-c/json-c.git
-$ cd json-c
-$ sh autogen.sh
-```
-
-followed by
-
-```bash
-$ ./configure
-$ make
-$ make install
-```
-
-To build and run the test programs:
-
-```bash
-$ make check
-```
-
-Linking to `libjson-c`
-----------------------
-
-If your system has `pkgconfig`,
-then you can just add this to your `makefile`:
-
-```make
-CFLAGS += $(shell pkg-config --cflags json-c)
-LDFLAGS += $(shell pkg-config --libs json-c)
-```
-
-Without `pkgconfig`, you would do something like this:
-
-```make
-JSON_C_DIR=/path/to/json_c/install
-CFLAGS += -I$(JSON_C_DIR)/include/json-c
-LDFLAGS+= -L$(JSON_C_DIR)/lib -ljson-c
-```
diff --git a/json-c/RELEASE_CHECKLIST.txt b/json-c/RELEASE_CHECKLIST.txt
deleted file mode 100644
index 4713258..0000000
--- a/json-c/RELEASE_CHECKLIST.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-
-Release checklist:
-
-release=0.12
-git clone https://github.com/json-c/json-c json-c-${release}
-cd json-c-${release}
-
-Check that the compile works on Linux
-Check that the compile works on NetBSD
-Check that the compile works on Windows
-Check ChangeLog to see if anything should be added.
-Make any fixes/changes *before* branching.
-
- git branch json-c-${release}
- git checkout json-c-${release}
-
-------------
-
-Update the version in json_c_version.h
-Update the version in Doxyfile
-Update the version in configure.ac
- Use ${release}.
-
-Update the libjson_la_LDFLAGS line in Makefile.am to the new version.
- Generally, unless we're doing a major release, change:
- -version-info x:y:z
- to
- -version-info x:y+1:z
-
-------------
-
-Generate the configure script and other files:
- sh autogen.sh
- git add -f Makefile.in aclocal.m4 config.guess \
- config.sub configure depcomp install-sh \
- ltmain.sh missing tests/Makefile.in \
- INSTALL
-
- # check for anything else to be added:
- git status --ignored
- git commit
-
-------------
-
-Generate the doxygen documentation:
- doxygen
- git add -f doc
- git commit doc
-
-------------
-
-cd ..
-echo .git > excludes
-echo autom4te.cache >> excludes
-tar -czf json-c-${release}.tar.gz -X excludes json-c-${release}
-
-echo doc >> excludes
-tar -czf json-c-${release}-nodoc.tar.gz -X excludes json-c-${release}
-
-------------
-
-Tag the branch:
-cd json-c-${release}
-git tag -a json-c-${release}-$(date +%Y%m%d) -m "Release json-c-${release}"
-
-git push origin json-c-${release}
-git push --tags
-
-------------
-
-Go to Amazon S3 service at:
- https://console.aws.amazon.com/s3/
-
-Upload the two tarballs in the json-c_releases folder.
- When uploading, use "Reduced Redundancy", and make the uploaded files publicly accessible.
-
-Logout of Amazon S3, and verify that the files are visible.
- https://s3.amazonaws.com/json-c_releases/releases/index.html
-
-===================================
-
-Post-release checklist:
-
-git checkout master
-Add new section to ChangeLog
-Update the version in json_c_version.h
-Update the version in Doxyfile
-Update the version in configure.ac
- Use ${release}.99 to indicate a version "newer" than anything on the branch.
-
-Leave the libjson_la_LDFLAGS line in Makefile.am alone.
- For more details see:
- http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
-
-------------
-
-Update the gh-pages branch with new docs:
-
-cd json-c-${release}
-git checkout json-c-${release}
-cd ..
-
-git clone -b gh-pages https://github.com/json-c/json-c json-c-pages
-cd json-c-pages
-mkdir json-c-${release}
-cp -R ../json-c-${release}/doc json-c-${release}/.
-cp ../json-c-${release}/README-WIN32.html json-c-${release}/.
-git add json-c-${release}
-git commit
-
-vi index.html
- Add/change links to current release.
-
-git commit index.html
-
-git push
-
-------------
-
-Update checksums on wiki page.
-
-cd ..
-openssl sha -sha256 json-c*gz
-openssl md5 json-c*gz
-
-Copy and paste this output into the wiki page at:
- https://github.com/json-c/json-c/wiki
-
-------------
-
-Send an email to the mailing list.
-
diff --git a/json-c/arraylist.c b/json-c/arraylist.c
deleted file mode 100644
index 1d899fa..0000000
--- a/json-c/arraylist.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * $Id: arraylist.c,v 1.4 2006/01/26 02:16:28 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#include "config.h"
-
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <string.h>
-#endif /* STDC_HEADERS */
-
-#if defined(HAVE_STRINGS_H) && !defined(_STRING_H) && !defined(__USE_BSD)
-# include <strings.h>
-#endif /* HAVE_STRINGS_H */
-
-#include "arraylist.h"
-
-struct array_list*
-array_list_new(array_list_free_fn *free_fn)
-{
- struct array_list *arr;
-
- arr = (struct array_list*)calloc(1, sizeof(struct array_list));
- if(!arr) return NULL;
- arr->size = ARRAY_LIST_DEFAULT_SIZE;
- arr->length = 0;
- arr->free_fn = free_fn;
- if(!(arr->array = (void**)calloc(sizeof(void*), arr->size))) {
- free(arr);
- return NULL;
- }
- return arr;
-}
-
-extern void
-array_list_free(struct array_list *arr)
-{
- int i;
- for(i = 0; i < arr->length; i++)
- if(arr->array[i]) arr->free_fn(arr->array[i]);
- free(arr->array);
- free(arr);
-}
-
-void*
-array_list_get_idx(struct array_list *arr, int i)
-{
- if(i >= arr->length) return NULL;
- return arr->array[i];
-}
-
-static int array_list_expand_internal(struct array_list *arr, int max)
-{
- void *t;
- int new_size;
-
- if(max < arr->size) return 0;
- new_size = arr->size << 1;
- if (new_size < max)
- new_size = max;
- if(!(t = realloc(arr->array, new_size*sizeof(void*)))) return -1;
- arr->array = (void**)t;
- (void)memset(arr->array + arr->size, 0, (new_size-arr->size)*sizeof(void*));
- arr->size = new_size;
- return 0;
-}
-
-int
-array_list_put_idx(struct array_list *arr, int idx, void *data)
-{
- if(array_list_expand_internal(arr, idx+1)) return -1;
- if(arr->array[idx]) arr->free_fn(arr->array[idx]);
- arr->array[idx] = data;
- if(arr->length <= idx) arr->length = idx + 1;
- return 0;
-}
-
-int
-array_list_add(struct array_list *arr, void *data)
-{
- return array_list_put_idx(arr, arr->length, data);
-}
-
-void
-array_list_sort(struct array_list *arr, int(*sort_fn)(const void *, const void *))
-{
- qsort(arr->array, arr->length, sizeof(arr->array[0]),
- (int (*)(const void *, const void *))sort_fn);
-}
-
-int
-array_list_length(struct array_list *arr)
-{
- return arr->length;
-}
diff --git a/json-c/arraylist.h b/json-c/arraylist.h
deleted file mode 100644
index 4f3113c..0000000
--- a/json-c/arraylist.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * $Id: arraylist.h,v 1.4 2006/01/26 02:16:28 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _arraylist_h_
-#define _arraylist_h_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define ARRAY_LIST_DEFAULT_SIZE 32
-
-typedef void (array_list_free_fn) (void *data);
-
-struct array_list
-{
- void **array;
- int length;
- int size;
- array_list_free_fn *free_fn;
-};
-
-extern struct array_list*
-array_list_new(array_list_free_fn *free_fn);
-
-extern void
-array_list_free(struct array_list *al);
-
-extern void*
-array_list_get_idx(struct array_list *al, int i);
-
-extern int
-array_list_put_idx(struct array_list *al, int i, void *data);
-
-extern int
-array_list_add(struct array_list *al, void *data);
-
-extern int
-array_list_length(struct array_list *al);
-
-extern void
-array_list_sort(struct array_list *arr, int(*compar)(const void *, const void *));
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/autogen.sh b/json-c/autogen.sh
deleted file mode 100755
index 69e765a..0000000
--- a/json-c/autogen.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-autoreconf -v --install || exit 1
-
-# If there are any options, assume the user wants to run configure.
-# To run configure w/o any options, use ./autogen.sh --configure
-if [ $# -gt 0 ] ; then
- case "$1" in
- --conf*)
- shift 1
- ;;
- esac
- exec ./configure "$@"
-fi
diff --git a/json-c/bits.h b/json-c/bits.h
deleted file mode 100644
index d14a1db..0000000
--- a/json-c/bits.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/**
- * @file
- * @deprecated Use json_util.h instead.
- *
- * $Id: bits.h,v 1.10 2006/01/30 23:07:57 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _bits_h_
-#define _bits_h_
-
-/**
- * @deprecated
- */
-#define hexdigit(x) (((x) <= '9') ? (x) - '0' : ((x) & 7) + 9)
-/**
- * @deprecated
- */
-#define error_ptr(error) ((void*)error)
-/**
- * @deprecated
- */
-#define error_description(error) (json_tokener_get_error(error))
-/**
- * @deprecated
- */
-#define is_error(ptr) (ptr == NULL)
-
-#endif
diff --git a/json-c/check.log b/json-c/check.log
deleted file mode 100644
index 3c73d2a..0000000
--- a/json-c/check.log
+++ /dev/null
@@ -1,2 +0,0 @@
-HEAD is now at 6442a2f... json-c: Add libjson to the vendor image
-HEAD is now at 6442a2f... json-c: Add libjson to the vendor image
diff --git a/json-c/config.h b/json-c/config.h
deleted file mode 100644
index f958d44..0000000
--- a/json-c/config.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* config.h. Generated from config.h.in by configure. */
-/* config.h.in. Generated from configure.ac by autoheader. */
-
-/* Enable RDRANR Hardware RNG Hash Seed */
-/* #undef ENABLE_RDRAND */
-
-/* Define if .gnu.warning accepts long strings. */
-/* #undef HAS_GNU_WARNING_LONG */
-
-/* Define to 1 if you have the declaration of `INFINITY', and to 0 if you
- don't. */
-#define HAVE_DECL_INFINITY 1
-
-/* Define to 1 if you have the declaration of `isinf', and to 0 if you don't.
- */
-#define HAVE_DECL_ISINF 1
-
-/* Define to 1 if you have the declaration of `isnan', and to 0 if you don't.
- */
-#define HAVE_DECL_ISNAN 1
-
-/* Define to 1 if you have the declaration of `nan', and to 0 if you don't. */
-#define HAVE_DECL_NAN 1
-
-/* Define to 1 if you have the declaration of `_finite', and to 0 if you
- don't. */
-#define HAVE_DECL__FINITE 0
-
-/* Define to 1 if you have the declaration of `_isnan', and to 0 if you don't.
- */
-#define HAVE_DECL__ISNAN 0
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#define HAVE_DLFCN_H 1
-
-/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
-/* #undef HAVE_DOPRNT */
-
-/* Define to 1 if you have the <endian.h> header file. */
-#define HAVE_ENDIAN_H 1
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#define HAVE_FCNTL_H 1
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#define HAVE_INTTYPES_H 1
-
-/* Define to 1 if you have the <limits.h> header file. */
-#define HAVE_LIMITS_H 1
-
-/* Define to 1 if you have the <locale.h> header file. */
-#define HAVE_LOCALE_H 1
-
-/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
- to 0 otherwise. */
-#define HAVE_MALLOC 1
-
-/* Define to 1 if you have the <memory.h> header file. */
-#define HAVE_MEMORY_H 1
-
-/* Define to 1 if you have the `open' function. */
-#define HAVE_OPEN 1
-
-/* Define to 1 if your system has a GNU libc compatible `realloc' function,
- and to 0 otherwise. */
-#define HAVE_REALLOC 1
-
-/* Define to 1 if you have the `setlocale' function. */
-#define HAVE_SETLOCALE 1
-
-/* Define to 1 if you have the `snprintf' function. */
-#define HAVE_SNPRINTF 1
-
-/* Define to 1 if you have the <stdarg.h> header file. */
-#define HAVE_STDARG_H 1
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#define HAVE_STDINT_H 1
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define to 1 if you have the `strcasecmp' function. */
-#define HAVE_STRCASECMP 1
-
-/* Define to 1 if you have the `strdup' function. */
-#define HAVE_STRDUP 1
-
-/* Define to 1 if you have the `strerror' function. */
-#define HAVE_STRERROR 1
-
-/* Define to 1 if you have the <strings.h> header file. */
-#define HAVE_STRINGS_H 1
-
-/* Define to 1 if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define to 1 if you have the `strncasecmp' function. */
-#define HAVE_STRNCASECMP 1
-
-/* Define to 1 if you have the <syslog.h> header file. */
-#define HAVE_SYSLOG_H 1
-
-/* Define to 1 if you have the <sys/cdefs.h> header file. */
-#define HAVE_SYS_CDEFS_H 1
-
-/* Define to 1 if you have the <sys/param.h> header file. */
-#define HAVE_SYS_PARAM_H 1
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#define HAVE_SYS_STAT_H 1
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#define HAVE_UNISTD_H 1
-
-/* Define to 1 if you have the `vasprintf' function. */
-#define HAVE_VASPRINTF 1
-
-/* Define to 1 if you have the `vprintf' function. */
-#define HAVE_VPRINTF 1
-
-/* Define to 1 if you have the `vsnprintf' function. */
-#define HAVE_VSNPRINTF 1
-
-/* Define to 1 if you have the `vsyslog' function. */
-#define HAVE_VSYSLOG 1
-
-/* Public define for json_inttypes.h */
-#define JSON_C_HAVE_INTTYPES_H 1
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
-#define LT_OBJDIR ".libs/"
-
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-/* #undef NO_MINUS_C_MINUS_O */
-
-/* Name of package */
-#define PACKAGE "json-c"
-
-/* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT "json-c@googlegroups.com"
-
-/* Define to the full name of this package. */
-#define PACKAGE_NAME "json-c"
-
-/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "json-c 0.12.99"
-
-/* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME "json-c"
-
-/* Define to the home page for this package. */
-#define PACKAGE_URL ""
-
-/* Define to the version of this package. */
-#define PACKAGE_VERSION "0.12.99"
-
-/* Define to 1 if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Version number of package */
-#define VERSION "0.12.99"
-
-/* Define to empty if `const' does not conform to ANSI C. */
-/* #undef const */
-
-/* Define to rpl_malloc if the replacement function should be used. */
-/* #undef malloc */
-
-/* Define to rpl_realloc if the replacement function should be used. */
-/* #undef realloc */
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-/* #undef size_t */
diff --git a/json-c/config.h.in b/json-c/config.h.in
deleted file mode 100644
index af2e5fc..0000000
--- a/json-c/config.h.in
+++ /dev/null
@@ -1,177 +0,0 @@
-/* config.h.in. Generated from configure.ac by autoheader. */
-
-/* Enable RDRANR Hardware RNG Hash Seed */
-#undef ENABLE_RDRAND
-
-/* Define if .gnu.warning accepts long strings. */
-#undef HAS_GNU_WARNING_LONG
-
-/* Define to 1 if you have the declaration of `INFINITY', and to 0 if you
- don't. */
-#undef HAVE_DECL_INFINITY
-
-/* Define to 1 if you have the declaration of `isinf', and to 0 if you don't.
- */
-#undef HAVE_DECL_ISINF
-
-/* Define to 1 if you have the declaration of `isnan', and to 0 if you don't.
- */
-#undef HAVE_DECL_ISNAN
-
-/* Define to 1 if you have the declaration of `nan', and to 0 if you don't. */
-#undef HAVE_DECL_NAN
-
-/* Define to 1 if you have the declaration of `_finite', and to 0 if you
- don't. */
-#undef HAVE_DECL__FINITE
-
-/* Define to 1 if you have the declaration of `_isnan', and to 0 if you don't.
- */
-#undef HAVE_DECL__ISNAN
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
-#undef HAVE_DOPRNT
-
-/* Define to 1 if you have the <endian.h> header file. */
-#undef HAVE_ENDIAN_H
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H
-
-/* Define to 1 if you have the <locale.h> header file. */
-#undef HAVE_LOCALE_H
-
-/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
- to 0 otherwise. */
-#undef HAVE_MALLOC
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `open' function. */
-#undef HAVE_OPEN
-
-/* Define to 1 if your system has a GNU libc compatible `realloc' function,
- and to 0 otherwise. */
-#undef HAVE_REALLOC
-
-/* Define to 1 if you have the `setlocale' function. */
-#undef HAVE_SETLOCALE
-
-/* Define to 1 if you have the `snprintf' function. */
-#undef HAVE_SNPRINTF
-
-/* Define to 1 if you have the <stdarg.h> header file. */
-#undef HAVE_STDARG_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strcasecmp' function. */
-#undef HAVE_STRCASECMP
-
-/* Define to 1 if you have the `strdup' function. */
-#undef HAVE_STRDUP
-
-/* Define to 1 if you have the `strerror' function. */
-#undef HAVE_STRERROR
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `strncasecmp' function. */
-#undef HAVE_STRNCASECMP
-
-/* Define to 1 if you have the <syslog.h> header file. */
-#undef HAVE_SYSLOG_H
-
-/* Define to 1 if you have the <sys/cdefs.h> header file. */
-#undef HAVE_SYS_CDEFS_H
-
-/* Define to 1 if you have the <sys/param.h> header file. */
-#undef HAVE_SYS_PARAM_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `vasprintf' function. */
-#undef HAVE_VASPRINTF
-
-/* Define to 1 if you have the `vprintf' function. */
-#undef HAVE_VPRINTF
-
-/* Define to 1 if you have the `vsnprintf' function. */
-#undef HAVE_VSNPRINTF
-
-/* Define to 1 if you have the `vsyslog' function. */
-#undef HAVE_VSYSLOG
-
-/* Public define for json_inttypes.h */
-#undef JSON_C_HAVE_INTTYPES_H
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
-#undef LT_OBJDIR
-
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-#undef NO_MINUS_C_MINUS_O
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to rpl_malloc if the replacement function should be used. */
-#undef malloc
-
-/* Define to rpl_realloc if the replacement function should be used. */
-#undef realloc
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef size_t
diff --git a/json-c/configure.ac b/json-c/configure.ac
deleted file mode 100644
index c50f81b..0000000
--- a/json-c/configure.ac
+++ /dev/null
@@ -1,107 +0,0 @@
-AC_PREREQ(2.52)
-
-# Process this file with autoconf to produce a configure script.
-AC_INIT([json-c], 0.12.99, [json-c@googlegroups.com])
-
-AM_INIT_AUTOMAKE
-
-AC_PROG_MAKE_SET
-
-AC_ARG_ENABLE(rdrand,
- AS_HELP_STRING([--enable-rdrand],
- [Enable RDRAND Hardware RNG Hash Seed generation on supported x86/x64 platforms.]),
-[if test x$enableval = xyes; then
- enable_rdrand=yes
- AC_DEFINE(ENABLE_RDRAND, 1, [Enable RDRANR Hardware RNG Hash Seed])
-fi])
-
-if test "x$enable_rdrand" = "xyes"; then
- AC_MSG_RESULT([RDRAND Hardware RNG Hash Seed enabled on supported x86/x64 platforms])
-else
- AC_MSG_RESULT([RDRAND Hardware RNG Hash Seed disabled. Use --enable-rdrand to enable])
-fi
-
-# Checks for programs.
-
-# Checks for libraries.
-
-# Checks for header files.
-AM_PROG_CC_C_O
-AC_CONFIG_HEADER(config.h)
-AC_CONFIG_HEADER(json_config.h)
-AC_HEADER_STDC
-AC_CHECK_HEADERS(fcntl.h limits.h strings.h syslog.h unistd.h [sys/cdefs.h] [sys/param.h] stdarg.h locale.h endian.h)
-AC_CHECK_HEADER(inttypes.h,[AC_DEFINE([JSON_C_HAVE_INTTYPES_H],[1],[Public define for json_inttypes.h])])
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_TYPE_SIZE_T
-
-# Checks for library functions.
-AC_FUNC_VPRINTF
-AC_FUNC_MEMCMP
-AC_FUNC_MALLOC
-AC_FUNC_REALLOC
-AC_CHECK_FUNCS(strcasecmp strdup strerror snprintf vsnprintf vasprintf open vsyslog strncasecmp setlocale)
-AC_CHECK_DECLS([INFINITY], [], [], [[#include <math.h>]])
-AC_CHECK_DECLS([nan], [], [], [[#include <math.h>]])
-AC_CHECK_DECLS([isnan], [], [], [[#include <math.h>]])
-AC_CHECK_DECLS([isinf], [], [], [[#include <math.h>]])
-AC_CHECK_DECLS([_isnan], [], [], [[#include <float.h>]])
-AC_CHECK_DECLS([_finite], [], [], [[#include <float.h>]])
-
-#check if .section.gnu.warning accepts long strings (for __warn_references)
-AC_LANG_PUSH([C])
-
-AC_MSG_CHECKING([if .gnu.warning accepts long strings])
-AC_LINK_IFELSE([AC_LANG_SOURCE([[
-extern void json_object_get();
-__asm__(".section .gnu.json_object_get,\n\t.ascii \"Please link against libjson-c instead of libjson\"\n\t.text");
-
-int main(int c,char* v) {return 0;}
-]])], [
- AC_DEFINE(HAS_GNU_WARNING_LONG, 1, [Define if .gnu.warning accepts long strings.])
- AC_MSG_RESULT(yes)
-], [
- AC_MSG_RESULT(no)
-])
-
-AC_LANG_POP([C])
-
-AM_PROG_LIBTOOL
-
-# Check for the -Bsymbolic-functions linker flag
-AC_ARG_ENABLE([Bsymbolic],
- [AS_HELP_STRING([--disable-Bsymbolic], [Avoid linking with -Bsymbolic-function])],
- [],
- [enable_Bsymbolic=check])
-
-AS_IF([test "x$enable_Bsymbolic" = "xcheck"],
- [
- saved_LDFLAGS="${LDFLAGS}"
- AC_MSG_CHECKING([for -Bsymbolic-functions linker flag])
- LDFLAGS=-Wl,-Bsymbolic-functions
- AC_TRY_LINK([], [int main (void) { return 0; }],
- [
- AC_MSG_RESULT([yes])
- enable_Bsymbolic=yes
- ],
- [
- AC_MSG_RESULT([no])
- enable_Bsymbolic=no
- ])
- LDFLAGS="${saved_LDFLAGS}"
- ])
-
-AS_IF([test "x$enable_Bsymbolic" = "xyes"], [JSON_BSYMBOLIC_LDFLAGS=-Wl[,]-Bsymbolic-functions])
-AC_SUBST(JSON_BSYMBOLIC_LDFLAGS)
-
-AC_CONFIG_FILES([
-Makefile
-json-c.pc
-tests/Makefile
-json-c-uninstalled.pc
-])
-
-AC_OUTPUT
-
diff --git a/json-c/debug.c b/json-c/debug.c
deleted file mode 100644
index 3b64b59..0000000
--- a/json-c/debug.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * $Id: debug.c,v 1.5 2006/01/26 02:16:28 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#include "config.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdarg.h>
-
-#if HAVE_SYSLOG_H
-# include <syslog.h>
-#endif /* HAVE_SYSLOG_H */
-
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif /* HAVE_UNISTD_H */
-
-#if HAVE_SYS_PARAM_H
-#include <sys/param.h>
-#endif /* HAVE_SYS_PARAM_H */
-
-#include "debug.h"
-
-static int _syslog = 0;
-static int _debug = 0;
-
-void mc_set_debug(int debug) { _debug = debug; }
-int mc_get_debug(void) { return _debug; }
-
-extern void mc_set_syslog(int syslog)
-{
- _syslog = syslog;
-}
-
-void mc_debug(const char *msg, ...)
-{
- va_list ap;
- if(_debug) {
- va_start(ap, msg);
-#if HAVE_VSYSLOG
- if(_syslog) {
- vsyslog(LOG_DEBUG, msg, ap);
- } else
-#endif
- vprintf(msg, ap);
- va_end(ap);
- }
-}
-
-void mc_error(const char *msg, ...)
-{
- va_list ap;
- va_start(ap, msg);
-#if HAVE_VSYSLOG
- if(_syslog) {
- vsyslog(LOG_ERR, msg, ap);
- } else
-#endif
- vfprintf(stderr, msg, ap);
- va_end(ap);
-}
-
-void mc_info(const char *msg, ...)
-{
- va_list ap;
- va_start(ap, msg);
-#if HAVE_VSYSLOG
- if(_syslog) {
- vsyslog(LOG_INFO, msg, ap);
- } else
-#endif
- vfprintf(stderr, msg, ap);
- va_end(ap);
-}
diff --git a/json-c/debug.h b/json-c/debug.h
deleted file mode 100644
index 80ca3e4..0000000
--- a/json-c/debug.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * $Id: debug.h,v 1.5 2006/01/30 23:07:57 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- * Copyright (c) 2009 Hewlett-Packard Development Company, L.P.
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _DEBUG_H_
-#define _DEBUG_H_
-
-#include <stdlib.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern void mc_set_debug(int debug);
-extern int mc_get_debug(void);
-
-extern void mc_set_syslog(int syslog);
-
-extern void mc_debug(const char *msg, ...);
-extern void mc_error(const char *msg, ...);
-extern void mc_info(const char *msg, ...);
-
-#ifndef __STRING
-#define __STRING(x) #x
-#endif
-
-#ifndef PARSER_BROKEN_FIXED
-
-#define JASSERT(cond) do {} while(0)
-
-#else
-
-#define JASSERT(cond) do { \
- if (!(cond)) { \
- mc_error("cjson assert failure %s:%d : cond \"" __STRING(cond) "failed\n", __FILE__, __LINE__); \
- *(int *)0 = 1;\
- abort(); \
- }\
- } while(0)
-
-#endif
-
-#define MC_ERROR(x, ...) mc_error(x, ##__VA_ARGS__)
-
-#ifdef MC_MAINTAINER_MODE
-#define MC_SET_DEBUG(x) mc_set_debug(x)
-#define MC_GET_DEBUG() mc_get_debug()
-#define MC_SET_SYSLOG(x) mc_set_syslog(x)
-#define MC_DEBUG(x, ...) mc_debug(x, ##__VA_ARGS__)
-#define MC_INFO(x, ...) mc_info(x, ##__VA_ARGS__)
-#else
-#define MC_SET_DEBUG(x) if (0) mc_set_debug(x)
-#define MC_GET_DEBUG() (0)
-#define MC_SET_SYSLOG(x) if (0) mc_set_syslog(x)
-#define MC_DEBUG(x, ...) if (0) mc_debug(x, ##__VA_ARGS__)
-#define MC_INFO(x, ...) if (0) mc_info(x, ##__VA_ARGS__)
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/json-c-uninstalled.pc.in b/json-c/json-c-uninstalled.pc.in
deleted file mode 100644
index dab2bab..0000000
--- a/json-c/json-c-uninstalled.pc.in
+++ /dev/null
@@ -1,11 +0,0 @@
-prefix=
-exec_prefix=
-libdir=@abs_top_builddir@
-includedir=@abs_top_srcdir@
-
-Name: json
-Description: JSON implementation in C
-Version: @VERSION@
-Requires:
-Libs: -L@abs_top_builddir@ -ljson-c
-Cflags: -I@abs_top_srcdir@
diff --git a/json-c/json-c.pc.in b/json-c/json-c.pc.in
deleted file mode 100644
index 037739d..0000000
--- a/json-c/json-c.pc.in
+++ /dev/null
@@ -1,11 +0,0 @@
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-
-Name: json-c
-Description: JSON implementation in C
-Version: @VERSION@
-Requires:
-Libs: -L${libdir} -ljson-c
-Cflags: -I${includedir}/json-c
diff --git a/json-c/json.h b/json-c/json.h
deleted file mode 100644
index e198f5d..0000000
--- a/json-c/json.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * $Id: json.h,v 1.6 2006/01/26 02:16:28 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- * Copyright (c) 2009 Hewlett-Packard Development Company, L.P.
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _json_h_
-#define _json_h_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "debug.h"
-#include "linkhash.h"
-#include "arraylist.h"
-#include "json_util.h"
-#include "json_object.h"
-#include "json_tokener.h"
-#include "json_object_iterator.h"
-#include "json_c_version.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/json_c_version.c b/json-c/json_c_version.c
deleted file mode 100644
index 13eb188..0000000
--- a/json-c/json_c_version.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (c) 2012 Eric Haszlakiewicz
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- */
-#include "config.h"
-
-#include "json_c_version.h"
-
-const char *json_c_version(void)
-{
- return JSON_C_VERSION;
-}
-
-int json_c_version_num(void)
-{
- return JSON_C_VERSION_NUM;
-}
-
diff --git a/json-c/json_c_version.h b/json-c/json_c_version.h
deleted file mode 100644
index d77f1a7..0000000
--- a/json-c/json_c_version.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (c) 2012 Eric Haszlakiewicz
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- */
-
-#ifndef _json_c_version_h_
-#define _json_c_version_h_
-
-#define JSON_C_MAJOR_VERSION 0
-#define JSON_C_MINOR_VERSION 12
-#define JSON_C_MICRO_VERSION 99
-#define JSON_C_VERSION_NUM ((JSON_C_MAJOR_VERSION << 16) | \
- (JSON_C_MINOR_VERSION << 8) | \
- JSON_C_MICRO_VERSION)
-#define JSON_C_VERSION "0.12.99"
-
-const char *json_c_version(void); /* Returns JSON_C_VERSION */
-int json_c_version_num(void); /* Returns JSON_C_VERSION_NUM */
-
-#endif
diff --git a/json-c/json_config.h b/json-c/json_config.h
deleted file mode 100644
index 965ff1c..0000000
--- a/json-c/json_config.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* json_config.h. Generated from json_config.h.in by configure. */
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#define JSON_C_HAVE_INTTYPES_H 1
diff --git a/json-c/json_config.h.in b/json-c/json_config.h.in
deleted file mode 100644
index 7888e02..0000000
--- a/json-c/json_config.h.in
+++ /dev/null
@@ -1,3 +0,0 @@
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef JSON_C_HAVE_INTTYPES_H
diff --git a/json-c/json_inttypes.h b/json-c/json_inttypes.h
deleted file mode 100644
index 9de8d24..0000000
--- a/json-c/json_inttypes.h
+++ /dev/null
@@ -1,28 +0,0 @@
-
-#ifndef _json_inttypes_h_
-#define _json_inttypes_h_
-
-#include "json_config.h"
-
-#if defined(_MSC_VER) && _MSC_VER <= 1700
-
-/* Anything less than Visual Studio C++ 10 is missing stdint.h and inttypes.h */
-typedef __int32 int32_t;
-#define INT32_MIN ((int32_t)_I32_MIN)
-#define INT32_MAX ((int32_t)_I32_MAX)
-typedef __int64 int64_t;
-#define INT64_MIN ((int64_t)_I64_MIN)
-#define INT64_MAX ((int64_t)_I64_MAX)
-#define PRId64 "I64d"
-#define SCNd64 "I64d"
-
-#else
-
-#ifdef JSON_C_HAVE_INTTYPES_H
-#include <inttypes.h>
-#endif
-/* inttypes.h includes stdint.h */
-
-#endif
-
-#endif
diff --git a/json-c/json_object.c b/json-c/json_object.c
deleted file mode 100644
index 8ed0239..0000000
--- a/json-c/json_object.c
+++ /dev/null
@@ -1,913 +0,0 @@
-/*
- * $Id: json_object.c,v 1.17 2006/07/25 03:24:50 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- * Copyright (c) 2009 Hewlett-Packard Development Company, L.P.
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#include "config.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <string.h>
-#include <math.h>
-#include <errno.h>
-
-#include "debug.h"
-#include "printbuf.h"
-#include "linkhash.h"
-#include "arraylist.h"
-#include "json_inttypes.h"
-#include "json_object.h"
-#include "json_object_private.h"
-#include "json_util.h"
-#include "math_compat.h"
-
-#if !defined(HAVE_STRDUP) && defined(_MSC_VER)
- /* MSC has the version as _strdup */
-# define strdup _strdup
-#elif !defined(HAVE_STRDUP)
-# error You do not have strdup on your system.
-#endif /* HAVE_STRDUP */
-
-#if !defined(HAVE_SNPRINTF) && defined(_MSC_VER)
- /* MSC has the version as _snprintf */
-# define snprintf _snprintf
-#elif !defined(HAVE_SNPRINTF)
-# error You do not have snprintf on your system.
-#endif /* HAVE_SNPRINTF */
-
-// Don't define this. It's not thread-safe.
-/* #define REFCOUNT_DEBUG 1 */
-
-const char *json_number_chars = "0123456789.+-eE";
-const char *json_hex_chars = "0123456789abcdefABCDEF";
-
-static void json_object_generic_delete(struct json_object* jso);
-static struct json_object* json_object_new(enum json_type o_type);
-
-static json_object_to_json_string_fn json_object_object_to_json_string;
-static json_object_to_json_string_fn json_object_boolean_to_json_string;
-static json_object_to_json_string_fn json_object_int_to_json_string;
-static json_object_to_json_string_fn json_object_double_to_json_string;
-static json_object_to_json_string_fn json_object_string_to_json_string;
-static json_object_to_json_string_fn json_object_array_to_json_string;
-
-
-/* ref count debugging */
-
-#ifdef REFCOUNT_DEBUG
-
-static struct lh_table *json_object_table;
-
-static void json_object_init(void) __attribute__ ((constructor));
-static void json_object_init(void) {
- MC_DEBUG("json_object_init: creating object table\n");
- json_object_table = lh_kptr_table_new(128, "json_object_table", NULL);
-}
-
-static void json_object_fini(void) __attribute__ ((destructor));
-static void json_object_fini(void)
-{
- struct lh_entry *ent;
- if (MC_GET_DEBUG())
- {
- if (json_object_table->count)
- {
- MC_DEBUG("json_object_fini: %d referenced objects at exit\n",
- json_object_table->count);
- lh_foreach(json_object_table, ent)
- {
- struct json_object* obj = (struct json_object*)ent->v;
- MC_DEBUG("\t%s:%p\n", json_type_to_name(obj->o_type), obj);
- }
- }
- }
- MC_DEBUG("json_object_fini: freeing object table\n");
- lh_table_free(json_object_table);
-}
-#endif /* REFCOUNT_DEBUG */
-
-
-/* string escaping */
-
-static int json_escape_str(struct printbuf *pb, char *str, int len)
-{
- int pos = 0, start_offset = 0;
- unsigned char c;
- while (len--)
- {
- c = str[pos];
- switch(c)
- {
- case '\b':
- case '\n':
- case '\r':
- case '\t':
- case '\f':
- case '"':
- case '\\':
- case '/':
- if(pos - start_offset > 0)
- printbuf_memappend(pb, str + start_offset, pos - start_offset);
-
- if(c == '\b') printbuf_memappend(pb, "\\b", 2);
- else if(c == '\n') printbuf_memappend(pb, "\\n", 2);
- else if(c == '\r') printbuf_memappend(pb, "\\r", 2);
- else if(c == '\t') printbuf_memappend(pb, "\\t", 2);
- else if(c == '\f') printbuf_memappend(pb, "\\f", 2);
- else if(c == '"') printbuf_memappend(pb, "\\\"", 2);
- else if(c == '\\') printbuf_memappend(pb, "\\\\", 2);
- else if(c == '/') printbuf_memappend(pb, "\\/", 2);
-
- start_offset = ++pos;
- break;
- default:
- if(c < ' ')
- {
- if(pos - start_offset > 0)
- printbuf_memappend(pb, str + start_offset, pos - start_offset);
- sprintbuf(pb, "\\u00%c%c",
- json_hex_chars[c >> 4],
- json_hex_chars[c & 0xf]);
- start_offset = ++pos;
- } else
- pos++;
- }
- }
- if (pos - start_offset > 0)
- printbuf_memappend(pb, str + start_offset, pos - start_offset);
- return 0;
-}
-
-
-/* reference counting */
-
-extern struct json_object* json_object_get(struct json_object *jso)
-{
- if (jso)
- jso->_ref_count++;
- return jso;
-}
-
-int json_object_put(struct json_object *jso)
-{
- if(jso)
- {
- jso->_ref_count--;
- if(!jso->_ref_count)
- {
- if (jso->_user_delete)
- jso->_user_delete(jso, jso->_userdata);
- jso->_delete(jso);
- return 1;
- }
- }
- return 0;
-}
-
-
-/* generic object construction and destruction parts */
-
-static void json_object_generic_delete(struct json_object* jso)
-{
-#ifdef REFCOUNT_DEBUG
- MC_DEBUG("json_object_delete_%s: %p\n",
- json_type_to_name(jso->o_type), jso);
- lh_table_delete(json_object_table, jso);
-#endif /* REFCOUNT_DEBUG */
- printbuf_free(jso->_pb);
- free(jso);
-}
-
-static struct json_object* json_object_new(enum json_type o_type)
-{
- struct json_object *jso;
-
- jso = (struct json_object*)calloc(sizeof(struct json_object), 1);
- if (!jso)
- return NULL;
- jso->o_type = o_type;
- jso->_ref_count = 1;
- jso->_delete = &json_object_generic_delete;
-#ifdef REFCOUNT_DEBUG
- lh_table_insert(json_object_table, jso, jso);
- MC_DEBUG("json_object_new_%s: %p\n", json_type_to_name(jso->o_type), jso);
-#endif /* REFCOUNT_DEBUG */
- return jso;
-}
-
-
-/* type checking functions */
-
-int json_object_is_type(struct json_object *jso, enum json_type type)
-{
- if (!jso)
- return (type == json_type_null);
- return (jso->o_type == type);
-}
-
-enum json_type json_object_get_type(struct json_object *jso)
-{
- if (!jso)
- return json_type_null;
- return jso->o_type;
-}
-
-/* set a custom conversion to string */
-
-void json_object_set_serializer(json_object *jso,
- json_object_to_json_string_fn to_string_func,
- void *userdata,
- json_object_delete_fn *user_delete)
-{
- // First, clean up any previously existing user info
- if (jso->_user_delete)
- {
- jso->_user_delete(jso, jso->_userdata);
- }
- jso->_userdata = NULL;
- jso->_user_delete = NULL;
-
- if (to_string_func == NULL)
- {
- // Reset to the standard serialization function
- switch(jso->o_type)
- {
- case json_type_null:
- jso->_to_json_string = NULL;
- break;
- case json_type_boolean:
- jso->_to_json_string = &json_object_boolean_to_json_string;
- break;
- case json_type_double:
- jso->_to_json_string = &json_object_double_to_json_string;
- break;
- case json_type_int:
- jso->_to_json_string = &json_object_int_to_json_string;
- break;
- case json_type_object:
- jso->_to_json_string = &json_object_object_to_json_string;
- break;
- case json_type_array:
- jso->_to_json_string = &json_object_array_to_json_string;
- break;
- case json_type_string:
- jso->_to_json_string = &json_object_string_to_json_string;
- break;
- }
- return;
- }
-
- jso->_to_json_string = to_string_func;
- jso->_userdata = userdata;
- jso->_user_delete = user_delete;
-}
-
-
-/* extended conversion to string */
-
-const char* json_object_to_json_string_ext(struct json_object *jso, int flags)
-{
- if (!jso)
- return "null";
-
- if ((!jso->_pb) && !(jso->_pb = printbuf_new()))
- return NULL;
-
- printbuf_reset(jso->_pb);
-
- if(jso->_to_json_string(jso, jso->_pb, 0, flags) < 0)
- return NULL;
-
- return jso->_pb->buf;
-}
-
-/* backwards-compatible conversion to string */
-
-const char* json_object_to_json_string(struct json_object *jso)
-{
- return json_object_to_json_string_ext(jso, JSON_C_TO_STRING_SPACED);
-}
-
-static void indent(struct printbuf *pb, int level, int flags)
-{
- if (flags & JSON_C_TO_STRING_PRETTY)
- {
- printbuf_memset(pb, -1, ' ', level * 2);
- }
-}
-
-/* json_object_object */
-
-static int json_object_object_to_json_string(struct json_object* jso,
- struct printbuf *pb,
- int level,
- int flags)
-{
- int had_children = 0;
- struct json_object_iter iter;
-
- sprintbuf(pb, "{" /*}*/);
- if (flags & JSON_C_TO_STRING_PRETTY)
- sprintbuf(pb, "\n");
- json_object_object_foreachC(jso, iter)
- {
- if (had_children)
- {
- sprintbuf(pb, ",");
- if (flags & JSON_C_TO_STRING_PRETTY)
- sprintbuf(pb, "\n");
- }
- had_children = 1;
- if (flags & JSON_C_TO_STRING_SPACED)
- sprintbuf(pb, " ");
- indent(pb, level+1, flags);
- sprintbuf(pb, "\"");
- json_escape_str(pb, iter.key, strlen(iter.key));
- if (flags & JSON_C_TO_STRING_SPACED)
- sprintbuf(pb, "\": ");
- else
- sprintbuf(pb, "\":");
- if(iter.val == NULL)
- sprintbuf(pb, "null");
- else
- iter.val->_to_json_string(iter.val, pb, level+1,flags);
- }
- if (flags & JSON_C_TO_STRING_PRETTY)
- {
- if (had_children)
- sprintbuf(pb, "\n");
- indent(pb,level,flags);
- }
- if (flags & JSON_C_TO_STRING_SPACED)
- return sprintbuf(pb, /*{*/ " }");
- else
- return sprintbuf(pb, /*{*/ "}");
-}
-
-
-static void json_object_lh_entry_free(struct lh_entry *ent)
-{
- free(ent->k);
- json_object_put((struct json_object*)ent->v);
-}
-
-static void json_object_object_delete(struct json_object* jso)
-{
- lh_table_free(jso->o.c_object);
- json_object_generic_delete(jso);
-}
-
-struct json_object* json_object_new_object(void)
-{
- struct json_object *jso = json_object_new(json_type_object);
- if (!jso)
- return NULL;
- jso->_delete = &json_object_object_delete;
- jso->_to_json_string = &json_object_object_to_json_string;
- jso->o.c_object = lh_kchar_table_new(JSON_OBJECT_DEF_HASH_ENTRIES,
- NULL, &json_object_lh_entry_free);
- if (!jso->o.c_object)
- {
- json_object_generic_delete(jso);
- errno = ENOMEM;
- return NULL;
- }
- return jso;
-}
-
-struct lh_table* json_object_get_object(struct json_object *jso)
-{
- if (!jso)
- return NULL;
- switch(jso->o_type)
- {
- case json_type_object:
- return jso->o.c_object;
- default:
- return NULL;
- }
-}
-
-void json_object_object_add(struct json_object* jso, const char *key,
- struct json_object *val)
-{
- // We lookup the entry and replace the value, rather than just deleting
- // and re-adding it, so the existing key remains valid.
- json_object *existing_value = NULL;
- struct lh_entry *existing_entry;
- existing_entry = lh_table_lookup_entry(jso->o.c_object, (void*)key);
- if (!existing_entry)
- {
- lh_table_insert(jso->o.c_object, strdup(key), val);
- return;
- }
- existing_value = (void *)existing_entry->v;
- if (existing_value)
- json_object_put(existing_value);
- existing_entry->v = val;
-}
-
-int json_object_object_length(struct json_object *jso)
-{
- return lh_table_length(jso->o.c_object);
-}
-
-struct json_object* json_object_object_get(struct json_object* jso, const char *key)
-{
- struct json_object *result = NULL;
- json_object_object_get_ex(jso, key, &result);
- return result;
-}
-
-json_bool json_object_object_get_ex(struct json_object* jso, const char *key, struct json_object **value)
-{
- if (value != NULL)
- *value = NULL;
-
- if (NULL == jso)
- return FALSE;
-
- switch(jso->o_type)
- {
- case json_type_object:
- return lh_table_lookup_ex(jso->o.c_object, (void*)key, (void**)value);
- default:
- if (value != NULL)
- *value = NULL;
- return FALSE;
- }
-}
-
-void json_object_object_del(struct json_object* jso, const char *key)
-{
- lh_table_delete(jso->o.c_object, key);
-}
-
-
-/* json_object_boolean */
-
-static int json_object_boolean_to_json_string(struct json_object* jso,
- struct printbuf *pb,
- int level,
- int flags)
-{
- if (jso->o.c_boolean)
- return sprintbuf(pb, "true");
- else
- return sprintbuf(pb, "false");
-}
-
-struct json_object* json_object_new_boolean(json_bool b)
-{
- struct json_object *jso = json_object_new(json_type_boolean);
- if (!jso)
- return NULL;
- jso->_to_json_string = &json_object_boolean_to_json_string;
- jso->o.c_boolean = b;
- return jso;
-}
-
-json_bool json_object_get_boolean(struct json_object *jso)
-{
- if (!jso)
- return FALSE;
- switch(jso->o_type)
- {
- case json_type_boolean:
- return jso->o.c_boolean;
- case json_type_int:
- return (jso->o.c_int64 != 0);
- case json_type_double:
- return (jso->o.c_double != 0);
- case json_type_string:
- return (jso->o.c_string.len != 0);
- default:
- return FALSE;
- }
-}
-
-
-/* json_object_int */
-
-static int json_object_int_to_json_string(struct json_object* jso,
- struct printbuf *pb,
- int level,
- int flags)
-{
- return sprintbuf(pb, "%"PRId64, jso->o.c_int64);
-}
-
-struct json_object* json_object_new_int(int32_t i)
-{
- struct json_object *jso = json_object_new(json_type_int);
- if (!jso)
- return NULL;
- jso->_to_json_string = &json_object_int_to_json_string;
- jso->o.c_int64 = i;
- return jso;
-}
-
-int32_t json_object_get_int(struct json_object *jso)
-{
- int64_t cint64;
- enum json_type o_type;
-
- if(!jso) return 0;
-
- o_type = jso->o_type;
- cint64 = jso->o.c_int64;
-
- if (o_type == json_type_string)
- {
- /*
- * Parse strings into 64-bit numbers, then use the
- * 64-to-32-bit number handling below.
- */
- if (json_parse_int64(jso->o.c_string.str, &cint64) != 0)
- return 0; /* whoops, it didn't work. */
- o_type = json_type_int;
- }
-
- switch(o_type) {
- case json_type_int:
- /* Make sure we return the correct values for out of range numbers. */
- if (cint64 <= INT32_MIN)
- return INT32_MIN;
- else if (cint64 >= INT32_MAX)
- return INT32_MAX;
- else
- return (int32_t)cint64;
- case json_type_double:
- return (int32_t)jso->o.c_double;
- case json_type_boolean:
- return jso->o.c_boolean;
- default:
- return 0;
- }
-}
-
-struct json_object* json_object_new_int64(int64_t i)
-{
- struct json_object *jso = json_object_new(json_type_int);
- if (!jso)
- return NULL;
- jso->_to_json_string = &json_object_int_to_json_string;
- jso->o.c_int64 = i;
- return jso;
-}
-
-int64_t json_object_get_int64(struct json_object *jso)
-{
- int64_t cint;
-
- if (!jso)
- return 0;
- switch(jso->o_type)
- {
- case json_type_int:
- return jso->o.c_int64;
- case json_type_double:
- return (int64_t)jso->o.c_double;
- case json_type_boolean:
- return jso->o.c_boolean;
- case json_type_string:
- if (json_parse_int64(jso->o.c_string.str, &cint) == 0)
- return cint;
- default:
- return 0;
- }
-}
-
-
-/* json_object_double */
-
-static int json_object_double_to_json_string(struct json_object* jso,
- struct printbuf *pb,
- int level,
- int flags)
-{
- char buf[128], *p, *q;
- int size;
- /* Although JSON RFC does not support
- NaN or Infinity as numeric values
- ECMA 262 section 9.8.1 defines
- how to handle these cases as strings */
- if(isnan(jso->o.c_double))
- size = snprintf(buf, sizeof(buf), "NaN");
- else if(isinf(jso->o.c_double))
- if(jso->o.c_double > 0)
- size = snprintf(buf, sizeof(buf), "Infinity");
- else
- size = snprintf(buf, sizeof(buf), "-Infinity");
- else
- size = snprintf(buf, sizeof(buf), "%.17g", jso->o.c_double);
-
- p = strchr(buf, ',');
- if (p) {
- *p = '.';
- } else {
- p = strchr(buf, '.');
- }
- if (p && (flags & JSON_C_TO_STRING_NOZERO)) {
- /* last useful digit, always keep 1 zero */
- p++;
- for (q=p ; *q ; q++) {
- if (*q!='0') p=q;
- }
- /* drop trailing zeroes */
- *(++p) = 0;
- size = p-buf;
- }
- printbuf_memappend(pb, buf, size);
- return size;
-}
-
-struct json_object* json_object_new_double(double d)
-{
- struct json_object *jso = json_object_new(json_type_double);
- if (!jso)
- return NULL;
- jso->_to_json_string = &json_object_double_to_json_string;
- jso->o.c_double = d;
- return jso;
-}
-
-struct json_object* json_object_new_double_s(double d, const char *ds)
-{
- struct json_object *jso = json_object_new_double(d);
- if (!jso)
- return NULL;
-
- char *new_ds = strdup(ds);
- if (!new_ds)
- {
- json_object_generic_delete(jso);
- errno = ENOMEM;
- return NULL;
- }
- json_object_set_serializer(jso, json_object_userdata_to_json_string,
- new_ds, json_object_free_userdata);
- return jso;
-}
-
-int json_object_userdata_to_json_string(struct json_object *jso,
- struct printbuf *pb, int level, int flags)
-{
- int userdata_len = strlen(jso->_userdata);
- printbuf_memappend(pb, jso->_userdata, userdata_len);
- return userdata_len;
-}
-
-void json_object_free_userdata(struct json_object *jso, void *userdata)
-{
- free(userdata);
-}
-
-double json_object_get_double(struct json_object *jso)
-{
- double cdouble;
- char *errPtr = NULL;
-
- if(!jso) return 0.0;
- switch(jso->o_type) {
- case json_type_double:
- return jso->o.c_double;
- case json_type_int:
- return jso->o.c_int64;
- case json_type_boolean:
- return jso->o.c_boolean;
- case json_type_string:
- errno = 0;
- cdouble = strtod(jso->o.c_string.str,&errPtr);
-
- /* if conversion stopped at the first character, return 0.0 */
- if (errPtr == jso->o.c_string.str)
- return 0.0;
-
- /*
- * Check that the conversion terminated on something sensible
- *
- * For example, { "pay" : 123AB } would parse as 123.
- */
- if (*errPtr != '\0')
- return 0.0;
-
- /*
- * If strtod encounters a string which would exceed the
- * capacity of a double, it returns +/- HUGE_VAL and sets
- * errno to ERANGE. But +/- HUGE_VAL is also a valid result
- * from a conversion, so we need to check errno.
- *
- * Underflow also sets errno to ERANGE, but it returns 0 in
- * that case, which is what we will return anyway.
- *
- * See CERT guideline ERR30-C
- */
- if ((HUGE_VAL == cdouble || -HUGE_VAL == cdouble) &&
- (ERANGE == errno))
- cdouble = 0.0;
- return cdouble;
- default:
- return 0.0;
- }
-}
-
-
-/* json_object_string */
-
-static int json_object_string_to_json_string(struct json_object* jso,
- struct printbuf *pb,
- int level,
- int flags)
-{
- sprintbuf(pb, "\"");
- json_escape_str(pb, jso->o.c_string.str, jso->o.c_string.len);
- sprintbuf(pb, "\"");
- return 0;
-}
-
-static void json_object_string_delete(struct json_object* jso)
-{
- free(jso->o.c_string.str);
- json_object_generic_delete(jso);
-}
-
-struct json_object* json_object_new_string(const char *s)
-{
- struct json_object *jso = json_object_new(json_type_string);
- if (!jso)
- return NULL;
- jso->_delete = &json_object_string_delete;
- jso->_to_json_string = &json_object_string_to_json_string;
- jso->o.c_string.str = strdup(s);
- if (!jso->o.c_string.str)
- {
- json_object_generic_delete(jso);
- errno = ENOMEM;
- return NULL;
- }
- jso->o.c_string.len = strlen(s);
- return jso;
-}
-
-struct json_object* json_object_new_string_len(const char *s, int len)
-{
- struct json_object *jso = json_object_new(json_type_string);
- if (!jso)
- return NULL;
- jso->_delete = &json_object_string_delete;
- jso->_to_json_string = &json_object_string_to_json_string;
- jso->o.c_string.str = (char*)malloc(len + 1);
- if (!jso->o.c_string.str)
- {
- json_object_generic_delete(jso);
- errno = ENOMEM;
- return NULL;
- }
- memcpy(jso->o.c_string.str, (void *)s, len);
- jso->o.c_string.str[len] = '\0';
- jso->o.c_string.len = len;
- return jso;
-}
-
-const char* json_object_get_string(struct json_object *jso)
-{
- if (!jso)
- return NULL;
- switch(jso->o_type)
- {
- case json_type_string:
- return jso->o.c_string.str;
- default:
- return json_object_to_json_string(jso);
- }
-}
-
-int json_object_get_string_len(struct json_object *jso)
-{
- if (!jso)
- return 0;
- switch(jso->o_type)
- {
- case json_type_string:
- return jso->o.c_string.len;
- default:
- return 0;
- }
-}
-
-
-/* json_object_array */
-
-static int json_object_array_to_json_string(struct json_object* jso,
- struct printbuf *pb,
- int level,
- int flags)
-{
- int had_children = 0;
- int ii;
- sprintbuf(pb, "[");
- if (flags & JSON_C_TO_STRING_PRETTY)
- sprintbuf(pb, "\n");
- for(ii=0; ii < json_object_array_length(jso); ii++)
- {
- struct json_object *val;
- if (had_children)
- {
- sprintbuf(pb, ",");
- if (flags & JSON_C_TO_STRING_PRETTY)
- sprintbuf(pb, "\n");
- }
- had_children = 1;
- if (flags & JSON_C_TO_STRING_SPACED)
- sprintbuf(pb, " ");
- indent(pb, level + 1, flags);
- val = json_object_array_get_idx(jso, ii);
- if(val == NULL)
- sprintbuf(pb, "null");
- else
- val->_to_json_string(val, pb, level+1, flags);
- }
- if (flags & JSON_C_TO_STRING_PRETTY)
- {
- if (had_children)
- sprintbuf(pb, "\n");
- indent(pb,level,flags);
- }
-
- if (flags & JSON_C_TO_STRING_SPACED)
- return sprintbuf(pb, " ]");
- else
- return sprintbuf(pb, "]");
-}
-
-static void json_object_array_entry_free(void *data)
-{
- json_object_put((struct json_object*)data);
-}
-
-static void json_object_array_delete(struct json_object* jso)
-{
- array_list_free(jso->o.c_array);
- json_object_generic_delete(jso);
-}
-
-struct json_object* json_object_new_array(void)
-{
- struct json_object *jso = json_object_new(json_type_array);
- if (!jso)
- return NULL;
- jso->_delete = &json_object_array_delete;
- jso->_to_json_string = &json_object_array_to_json_string;
- jso->o.c_array = array_list_new(&json_object_array_entry_free);
- return jso;
-}
-
-struct array_list* json_object_get_array(struct json_object *jso)
-{
- if (!jso)
- return NULL;
- switch(jso->o_type)
- {
- case json_type_array:
- return jso->o.c_array;
- default:
- return NULL;
- }
-}
-
-void json_object_array_sort(struct json_object *jso, int(*sort_fn)(const void *, const void *))
-{
- array_list_sort(jso->o.c_array, sort_fn);
-}
-
-int json_object_array_length(struct json_object *jso)
-{
- return array_list_length(jso->o.c_array);
-}
-
-int json_object_array_add(struct json_object *jso,struct json_object *val)
-{
- return array_list_add(jso->o.c_array, val);
-}
-
-int json_object_array_put_idx(struct json_object *jso, int idx,
- struct json_object *val)
-{
- return array_list_put_idx(jso->o.c_array, idx, val);
-}
-
-struct json_object* json_object_array_get_idx(struct json_object *jso,
- int idx)
-{
- return (struct json_object*)array_list_get_idx(jso->o.c_array, idx);
-}
-
diff --git a/json-c/json_object.h b/json-c/json_object.h
deleted file mode 100644
index 0dca0b1..0000000
--- a/json-c/json_object.h
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- * $Id: json_object.h,v 1.12 2006/01/30 23:07:57 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- * Copyright (c) 2009 Hewlett-Packard Development Company, L.P.
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _json_object_h_
-#define _json_object_h_
-
-#ifdef __GNUC__
-#define THIS_FUNCTION_IS_DEPRECATED(func) func __attribute__ ((deprecated))
-#elif defined(_MSC_VER)
-#define THIS_FUNCTION_IS_DEPRECATED(func) __declspec(deprecated) func
-#else
-#define THIS_FUNCTION_IS_DEPRECATED(func) func
-#endif
-
-#include "json_inttypes.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define JSON_OBJECT_DEF_HASH_ENTRIES 16
-
-/**
- * A flag for the json_object_to_json_string_ext() and
- * json_object_to_file_ext() functions which causes the output
- * to have no extra whitespace or formatting applied.
- */
-#define JSON_C_TO_STRING_PLAIN 0
-/**
- * A flag for the json_object_to_json_string_ext() and
- * json_object_to_file_ext() functions which causes the output to have
- * minimal whitespace inserted to make things slightly more readable.
- */
-#define JSON_C_TO_STRING_SPACED (1<<0)
-/**
- * A flag for the json_object_to_json_string_ext() and
- * json_object_to_file_ext() functions which causes
- * the output to be formatted.
- *
- * See the "Two Space Tab" option at http://jsonformatter.curiousconcept.com/
- * for an example of the format.
- */
-#define JSON_C_TO_STRING_PRETTY (1<<1)
-/**
- * A flag to drop trailing zero for float values
- */
-#define JSON_C_TO_STRING_NOZERO (1<<2)
-
-#undef FALSE
-#define FALSE ((json_bool)0)
-
-#undef TRUE
-#define TRUE ((json_bool)1)
-
-extern const char *json_number_chars;
-extern const char *json_hex_chars;
-
-/* CAW: added for ANSI C iteration correctness */
-struct json_object_iter
-{
- char *key;
- struct json_object *val;
- struct lh_entry *entry;
-};
-
-/* forward structure definitions */
-
-typedef int json_bool;
-typedef struct printbuf printbuf;
-typedef struct lh_table lh_table;
-typedef struct array_list array_list;
-typedef struct json_object json_object;
-typedef struct json_object_iter json_object_iter;
-typedef struct json_tokener json_tokener;
-
-/**
- * Type of custom user delete functions. See json_object_set_serializer.
- */
-typedef void (json_object_delete_fn)(struct json_object *jso, void *userdata);
-
-/**
- * Type of a custom serialization function. See json_object_set_serializer.
- */
-typedef int (json_object_to_json_string_fn)(struct json_object *jso,
- struct printbuf *pb,
- int level,
- int flags);
-
-/* supported object types */
-
-typedef enum json_type {
- /* If you change this, be sure to update json_type_to_name() too */
- json_type_null,
- json_type_boolean,
- json_type_double,
- json_type_int,
- json_type_object,
- json_type_array,
- json_type_string
-} json_type;
-
-/* reference counting functions */
-
-/**
- * Increment the reference count of json_object, thereby grabbing shared
- * ownership of obj.
- *
- * @param obj the json_object instance
- */
-extern struct json_object* json_object_get(struct json_object *obj);
-
-/**
- * Decrement the reference count of json_object and free if it reaches zero.
- * You must have ownership of obj prior to doing this or you will cause an
- * imbalance in the reference count.
- *
- * @param obj the json_object instance
- * @returns 1 if the object was freed.
- */
-int json_object_put(struct json_object *obj);
-
-/**
- * Check if the json_object is of a given type
- * @param obj the json_object instance
- * @param type one of:
- json_type_null (i.e. obj == NULL),
- json_type_boolean,
- json_type_double,
- json_type_int,
- json_type_object,
- json_type_array,
- json_type_string
- */
-extern int json_object_is_type(struct json_object *obj, enum json_type type);
-
-/**
- * Get the type of the json_object. See also json_type_to_name() to turn this
- * into a string suitable, for instance, for logging.
- *
- * @param obj the json_object instance
- * @returns type being one of:
- json_type_null (i.e. obj == NULL),
- json_type_boolean,
- json_type_double,
- json_type_int,
- json_type_object,
- json_type_array,
- json_type_string
- */
-extern enum json_type json_object_get_type(struct json_object *obj);
-
-
-/** Stringify object to json format.
- * Equivalent to json_object_to_json_string_ext(obj, JSON_C_TO_STRING_SPACED)
- * The pointer you get is an internal of your json object. You don't
- * have to free it, later use of json_object_put() should be sufficient.
- * If you can not ensure there's no concurrent access to *obj use
- * strdup().
- * @param obj the json_object instance
- * @returns a string in JSON format
- */
-extern const char* json_object_to_json_string(struct json_object *obj);
-
-/** Stringify object to json format
- * @see json_object_to_json_string() for details on how to free string.
- * @param obj the json_object instance
- * @param flags formatting options, see JSON_C_TO_STRING_PRETTY and other constants
- * @returns a string in JSON format
- */
-extern const char* json_object_to_json_string_ext(struct json_object *obj, int
-flags);
-
-/**
- * Set a custom serialization function to be used when this particular object
- * is converted to a string by json_object_to_json_string.
- *
- * If a custom serializer is already set on this object, any existing
- * user_delete function is called before the new one is set.
- *
- * If to_string_func is NULL, the other parameters are ignored
- * and the default behaviour is reset.
- *
- * The userdata parameter is optional and may be passed as NULL. If provided,
- * it is passed to to_string_func as-is. This parameter may be NULL even
- * if user_delete is non-NULL.
- *
- * The user_delete parameter is optional and may be passed as NULL, even if
- * the userdata parameter is non-NULL. It will be called just before the
- * json_object is deleted, after it's reference count goes to zero
- * (see json_object_put()).
- * If this is not provided, it is up to the caller to free the userdata at
- * an appropriate time. (i.e. after the json_object is deleted)
- *
- * @param jso the object to customize
- * @param to_string_func the custom serialization function
- * @param userdata an optional opaque cookie
- * @param user_delete an optional function from freeing userdata
- */
-extern void json_object_set_serializer(json_object *jso,
- json_object_to_json_string_fn to_string_func,
- void *userdata,
- json_object_delete_fn *user_delete);
-
-/**
- * Simply call free on the userdata pointer.
- * Can be used with json_object_set_serializer().
- *
- * @param jso unused
- * @param userdata the pointer that is passed to free().
- */
-json_object_delete_fn json_object_free_userdata;
-
-/**
- * Copy the jso->_userdata string over to pb as-is.
- * Can be used with json_object_set_serializer().
- *
- * @param jso The object whose _userdata is used.
- * @param pb The destination buffer.
- * @param level Ignored.
- * @param flags Ignored.
- */
-json_object_to_json_string_fn json_object_userdata_to_json_string;
-
-
-/* object type methods */
-
-/** Create a new empty object with a reference count of 1. The caller of
- * this object initially has sole ownership. Remember, when using
- * json_object_object_add or json_object_array_put_idx, ownership will
- * transfer to the object/array. Call json_object_get if you want to maintain
- * shared ownership or also add this object as a child of multiple objects or
- * arrays. Any ownerships you acquired but did not transfer must be released
- * through json_object_put.
- *
- * @returns a json_object of type json_type_object
- */
-extern struct json_object* json_object_new_object(void);
-
-/** Get the hashtable of a json_object of type json_type_object
- * @param obj the json_object instance
- * @returns a linkhash
- */
-extern struct lh_table* json_object_get_object(struct json_object *obj);
-
-/** Get the size of an object in terms of the number of fields it has.
- * @param obj the json_object whose length to return
- */
-extern int json_object_object_length(struct json_object* obj);
-
-/** Add an object field to a json_object of type json_type_object
- *
- * The reference count will *not* be incremented. This is to make adding
- * fields to objects in code more compact. If you want to retain a reference
- * to an added object, independent of the lifetime of obj, you must wrap the
- * passed object with json_object_get.
- *
- * Upon calling this, the ownership of val transfers to obj. Thus you must
- * make sure that you do in fact have ownership over this object. For instance,
- * json_object_new_object will give you ownership until you transfer it,
- * whereas json_object_object_get does not.
- *
- * @param obj the json_object instance
- * @param key the object field name (a private copy will be duplicated)
- * @param val a json_object or NULL member to associate with the given field
- */
-extern void json_object_object_add(struct json_object* obj, const char *key,
- struct json_object *val);
-
-/** Get the json_object associate with a given object field
- *
- * *No* reference counts will be changed. There is no need to manually adjust
- * reference counts through the json_object_put/json_object_get methods unless
- * you need to have the child (value) reference maintain a different lifetime
- * than the owning parent (obj). Ownership of the returned value is retained
- * by obj (do not do json_object_put unless you have done a json_object_get).
- * If you delete the value from obj (json_object_object_del) and wish to access
- * the returned reference afterwards, make sure you have first gotten shared
- * ownership through json_object_get (& don't forget to do a json_object_put
- * or transfer ownership to prevent a memory leak).
- *
- * @param obj the json_object instance
- * @param key the object field name
- * @returns the json_object associated with the given field name
- * @deprecated Please use json_object_object_get_ex
- */
-THIS_FUNCTION_IS_DEPRECATED(extern struct json_object* json_object_object_get(struct json_object* obj,
- const char *key));
-
-/** Get the json_object associated with a given object field.
- *
- * This returns true if the key is found, false in all other cases (including
- * if obj isn't a json_type_object).
- *
- * *No* reference counts will be changed. There is no need to manually adjust
- * reference counts through the json_object_put/json_object_get methods unless
- * you need to have the child (value) reference maintain a different lifetime
- * than the owning parent (obj). Ownership of value is retained by obj.
- *
- * @param obj the json_object instance
- * @param key the object field name
- * @param value a pointer where to store a reference to the json_object
- * associated with the given field name.
- *
- * It is safe to pass a NULL value.
- * @returns whether or not the key exists
- */
-extern json_bool json_object_object_get_ex(struct json_object* obj,
- const char *key,
- struct json_object **value);
-
-/** Delete the given json_object field
- *
- * The reference count will be decremented for the deleted object. If there
- * are no more owners of the value represented by this key, then the value is
- * freed. Otherwise, the reference to the value will remain in memory.
- *
- * @param obj the json_object instance
- * @param key the object field name
- */
-extern void json_object_object_del(struct json_object* obj, const char *key);
-
-/**
- * Iterate through all keys and values of an object.
- *
- * Adding keys to the object while iterating is NOT allowed.
- *
- * Deleting an existing key, or replacing an existing key with a
- * new value IS allowed.
- *
- * @param obj the json_object instance
- * @param key the local name for the char* key variable defined in the body
- * @param val the local name for the json_object* object variable defined in
- * the body
- */
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) && __STDC_VERSION__ >= 199901L
-
-# define json_object_object_foreach(obj,key,val) \
- char *key; \
- struct json_object *val __attribute__((__unused__)); \
- for(struct lh_entry *entry ## key = json_object_get_object(obj)->head, *entry_next ## key = NULL; \
- ({ if(entry ## key) { \
- key = (char*)entry ## key->k; \
- val = (struct json_object*)entry ## key->v; \
- entry_next ## key = entry ## key->next; \
- } ; entry ## key; }); \
- entry ## key = entry_next ## key )
-
-#else /* ANSI C or MSC */
-
-# define json_object_object_foreach(obj,key,val) \
- char *key;\
- struct json_object *val; \
- struct lh_entry *entry ## key; \
- struct lh_entry *entry_next ## key = NULL; \
- for(entry ## key = json_object_get_object(obj)->head; \
- (entry ## key ? ( \
- key = (char*)entry ## key->k, \
- val = (struct json_object*)entry ## key->v, \
- entry_next ## key = entry ## key->next, \
- entry ## key) : 0); \
- entry ## key = entry_next ## key)
-
-#endif /* defined(__GNUC__) && !defined(__STRICT_ANSI__) && __STDC_VERSION__ >= 199901L */
-
-/** Iterate through all keys and values of an object (ANSI C Safe)
- * @param obj the json_object instance
- * @param iter the object iterator
- */
-#define json_object_object_foreachC(obj,iter) \
- for(iter.entry = json_object_get_object(obj)->head; (iter.entry ? (iter.key = (char*)iter.entry->k, iter.val = (struct json_object*)iter.entry->v, iter.entry) : 0); iter.entry = iter.entry->next)
-
-/* Array type methods */
-
-/** Create a new empty json_object of type json_type_array
- * @returns a json_object of type json_type_array
- */
-extern struct json_object* json_object_new_array(void);
-
-/** Get the arraylist of a json_object of type json_type_array
- * @param obj the json_object instance
- * @returns an arraylist
- */
-extern struct array_list* json_object_get_array(struct json_object *obj);
-
-/** Get the length of a json_object of type json_type_array
- * @param obj the json_object instance
- * @returns an int
- */
-extern int json_object_array_length(struct json_object *obj);
-
-/** Sorts the elements of jso of type json_type_array
-*
-* Pointers to the json_object pointers will be passed as the two arguments
-* to @sort_fn
-*
-* @param obj the json_object instance
-* @param sort_fn a sorting function
-*/
-extern void json_object_array_sort(struct json_object *jso, int(*sort_fn)(const void *, const void *));
-
-/** Add an element to the end of a json_object of type json_type_array
- *
- * The reference count will *not* be incremented. This is to make adding
- * fields to objects in code more compact. If you want to retain a reference
- * to an added object you must wrap the passed object with json_object_get
- *
- * @param obj the json_object instance
- * @param val the json_object to be added
- */
-extern int json_object_array_add(struct json_object *obj,
- struct json_object *val);
-
-/** Insert or replace an element at a specified index in an array (a json_object of type json_type_array)
- *
- * The reference count will *not* be incremented. This is to make adding
- * fields to objects in code more compact. If you want to retain a reference
- * to an added object you must wrap the passed object with json_object_get
- *
- * The reference count of a replaced object will be decremented.
- *
- * The array size will be automatically be expanded to the size of the
- * index if the index is larger than the current size.
- *
- * @param obj the json_object instance
- * @param idx the index to insert the element at
- * @param val the json_object to be added
- */
-extern int json_object_array_put_idx(struct json_object *obj, int idx,
- struct json_object *val);
-
-/** Get the element at specificed index of the array (a json_object of type json_type_array)
- * @param obj the json_object instance
- * @param idx the index to get the element at
- * @returns the json_object at the specified index (or NULL)
- */
-extern struct json_object* json_object_array_get_idx(struct json_object *obj,
- int idx);
-
-/* json_bool type methods */
-
-/** Create a new empty json_object of type json_type_boolean
- * @param b a json_bool TRUE or FALSE (0 or 1)
- * @returns a json_object of type json_type_boolean
- */
-extern struct json_object* json_object_new_boolean(json_bool b);
-
-/** Get the json_bool value of a json_object
- *
- * The type is coerced to a json_bool if the passed object is not a json_bool.
- * integer and double objects will return FALSE if there value is zero
- * or TRUE otherwise. If the passed object is a string it will return
- * TRUE if it has a non zero length. If any other object type is passed
- * TRUE will be returned if the object is not NULL.
- *
- * @param obj the json_object instance
- * @returns a json_bool
- */
-extern json_bool json_object_get_boolean(struct json_object *obj);
-
-
-/* int type methods */
-
-/** Create a new empty json_object of type json_type_int
- * Note that values are stored as 64-bit values internally.
- * To ensure the full range is maintained, use json_object_new_int64 instead.
- * @param i the integer
- * @returns a json_object of type json_type_int
- */
-extern struct json_object* json_object_new_int(int32_t i);
-
-
-/** Create a new empty json_object of type json_type_int
- * @param i the integer
- * @returns a json_object of type json_type_int
- */
-extern struct json_object* json_object_new_int64(int64_t i);
-
-
-/** Get the int value of a json_object
- *
- * The type is coerced to a int if the passed object is not a int.
- * double objects will return their integer conversion. Strings will be
- * parsed as an integer. If no conversion exists then 0 is returned
- * and errno is set to EINVAL. null is equivalent to 0 (no error values set)
- *
- * Note that integers are stored internally as 64-bit values.
- * If the value of too big or too small to fit into 32-bit, INT32_MAX or
- * INT32_MIN are returned, respectively.
- *
- * @param obj the json_object instance
- * @returns an int
- */
-extern int32_t json_object_get_int(struct json_object *obj);
-
-/** Get the int value of a json_object
- *
- * The type is coerced to a int64 if the passed object is not a int64.
- * double objects will return their int64 conversion. Strings will be
- * parsed as an int64. If no conversion exists then 0 is returned.
- *
- * NOTE: Set errno to 0 directly before a call to this function to determine
- * whether or not conversion was successful (it does not clear the value for
- * you).
- *
- * @param obj the json_object instance
- * @returns an int64
- */
-extern int64_t json_object_get_int64(struct json_object *obj);
-
-
-/* double type methods */
-
-/** Create a new empty json_object of type json_type_double
- * @param d the double
- * @returns a json_object of type json_type_double
- */
-extern struct json_object* json_object_new_double(double d);
-
-/**
- * Create a new json_object of type json_type_double, using
- * the exact serialized representation of the value.
- *
- * This allows for numbers that would otherwise get displayed
- * inefficiently (e.g. 12.3 => "12.300000000000001") to be
- * serialized with the more convenient form.
- *
- * Note: this is used by json_tokener_parse_ex() to allow for
- * an exact re-serialization of a parsed object.
- *
- * An equivalent sequence of calls is:
- * @code
- * jso = json_object_new_double(d);
- * json_object_set_serializer(d, json_object_userdata_to_json_string,
- * strdup(ds), json_object_free_userdata)
- * @endcode
- *
- * @param d the numeric value of the double.
- * @param ds the string representation of the double. This will be copied.
- */
-extern struct json_object* json_object_new_double_s(double d, const char *ds);
-
-/** Get the double floating point value of a json_object
- *
- * The type is coerced to a double if the passed object is not a double.
- * integer objects will return their double conversion. Strings will be
- * parsed as a double. If no conversion exists then 0.0 is returned and
- * errno is set to EINVAL. null is equivalent to 0 (no error values set)
- *
- * If the value is too big to fit in a double, then the value is set to
- * the closest infinity with errno set to ERANGE. If strings cannot be
- * converted to their double value, then EINVAL is set & NaN is returned.
- *
- * Arrays of length 0 are interpreted as 0 (with no error flags set).
- * Arrays of length 1 are effectively cast to the equivalent object and
- * converted using the above rules. All other arrays set the error to
- * EINVAL & return NaN.
- *
- * NOTE: Set errno to 0 directly before a call to this function to
- * determine whether or not conversion was successful (it does not clear
- * the value for you).
- *
- * @param obj the json_object instance
- * @returns a double floating point number
- */
-extern double json_object_get_double(struct json_object *obj);
-
-
-/* string type methods */
-
-/** Create a new empty json_object of type json_type_string
- *
- * A copy of the string is made and the memory is managed by the json_object
- *
- * @param s the string
- * @returns a json_object of type json_type_string
- */
-extern struct json_object* json_object_new_string(const char *s);
-
-extern struct json_object* json_object_new_string_len(const char *s, int len);
-
-/** Get the string value of a json_object
- *
- * If the passed object is not of type json_type_string then the JSON
- * representation of the object is returned.
- *
- * The returned string memory is managed by the json_object and will
- * be freed when the reference count of the json_object drops to zero.
- *
- * @param obj the json_object instance
- * @returns a string
- */
-extern const char* json_object_get_string(struct json_object *obj);
-
-/** Get the string length of a json_object
- *
- * If the passed object is not of type json_type_string then zero
- * will be returned.
- *
- * @param obj the json_object instance
- * @returns int
- */
-extern int json_object_get_string_len(struct json_object *obj);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/json_object_iterator.c b/json-c/json_object_iterator.c
deleted file mode 100644
index 7066649..0000000
--- a/json-c/json_object_iterator.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/**
-*******************************************************************************
-* @file json_object_iterator.c
-*
-* Copyright (c) 2009-2012 Hewlett-Packard Development Company, L.P.
-*
-* This library is free software; you can redistribute it and/or modify
-* it under the terms of the MIT license. See COPYING for details.
-*
-* @brief json-c forces clients to use its private data
-* structures for JSON Object iteration. This API
-* implementation corrects that by abstracting the
-* private json-c details.
-*
-*******************************************************************************
-*/
-
-#include <stddef.h>
-
-#include "json.h"
-#include "json_object_private.h"
-
-#include "json_object_iterator.h"
-
-/**
- * How It Works
- *
- * For each JSON Object, json-c maintains a linked list of zero
- * or more lh_entry (link-hash entry) structures inside the
- * Object's link-hash table (lh_table).
- *
- * Each lh_entry structure on the JSON Object's linked list
- * represents a single name/value pair. The "next" field of the
- * last lh_entry in the list is set to NULL, which terminates
- * the list.
- *
- * We represent a valid iterator that refers to an actual
- * name/value pair via a pointer to the pair's lh_entry
- * structure set as the iterator's opaque_ field.
- *
- * We follow json-c's current pair list representation by
- * representing a valid "end" iterator (one that refers past the
- * last pair) with a NULL value in the iterator's opaque_ field.
- *
- * A JSON Object without any pairs in it will have the "head"
- * field of its lh_table structure set to NULL. For such an
- * object, json_object_iter_begin will return an iterator with
- * the opaque_ field set to NULL, which is equivalent to the
- * "end" iterator.
- *
- * When iterating, we simply update the iterator's opaque_ field
- * to point to the next lh_entry structure in the linked list.
- * opaque_ will become NULL once we iterate past the last pair
- * in the list, which makes the iterator equivalent to the "end"
- * iterator.
- */
-
-/// Our current representation of the "end" iterator;
-///
-/// @note May not always be NULL
-static const void* kObjectEndIterValue = NULL;
-
-/**
- * ****************************************************************************
- */
-struct json_object_iterator
-json_object_iter_begin(struct json_object* obj)
-{
- struct json_object_iterator iter;
- struct lh_table* pTable;
-
- /// @note json_object_get_object will return NULL if passed NULL
- /// or a non-json_type_object instance
- pTable = json_object_get_object(obj);
- JASSERT(NULL != pTable);
-
- /// @note For a pair-less Object, head is NULL, which matches our
- /// definition of the "end" iterator
- iter.opaque_ = pTable->head;
- return iter;
-}
-
-/**
- * ****************************************************************************
- */
-struct json_object_iterator
-json_object_iter_end(const struct json_object* obj)
-{
- struct json_object_iterator iter;
-
- JASSERT(NULL != obj);
- JASSERT(json_object_is_type(obj, json_type_object));
-
- iter.opaque_ = kObjectEndIterValue;
-
- return iter;
-}
-
-/**
- * ****************************************************************************
- */
-void
-json_object_iter_next(struct json_object_iterator* iter)
-{
- JASSERT(NULL != iter);
- JASSERT(kObjectEndIterValue != iter->opaque_);
-
- iter->opaque_ = ((struct lh_entry *)iter->opaque_)->next;
-}
-
-
-/**
- * ****************************************************************************
- */
-const char*
-json_object_iter_peek_name(const struct json_object_iterator* iter)
-{
- JASSERT(NULL != iter);
- JASSERT(kObjectEndIterValue != iter->opaque_);
-
- return (const char*)(((struct lh_entry *)iter->opaque_)->k);
-}
-
-
-/**
- * ****************************************************************************
- */
-struct json_object*
-json_object_iter_peek_value(const struct json_object_iterator* iter)
-{
- JASSERT(NULL != iter);
- JASSERT(kObjectEndIterValue != iter->opaque_);
-
- return (struct json_object*)(((struct lh_entry *)iter->opaque_)->v);
-}
-
-
-/**
- * ****************************************************************************
- */
-json_bool
-json_object_iter_equal(const struct json_object_iterator* iter1,
- const struct json_object_iterator* iter2)
-{
- JASSERT(NULL != iter1);
- JASSERT(NULL != iter2);
-
- return (iter1->opaque_ == iter2->opaque_);
-}
-
-
-/**
- * ****************************************************************************
- */
-struct json_object_iterator
-json_object_iter_init_default(void)
-{
- struct json_object_iterator iter;
-
- /**
- * @note Make this a negative, invalid value, such that
- * accidental access to it would likely be trapped by the
- * hardware as an invalid address.
- */
- iter.opaque_ = NULL;
-
- return iter;
-}
diff --git a/json-c/json_object_iterator.h b/json-c/json_object_iterator.h
deleted file mode 100644
index 44c9fb2..0000000
--- a/json-c/json_object_iterator.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/**
-*******************************************************************************
-* @file json_object_iterator.h
-*
-* Copyright (c) 2009-2012 Hewlett-Packard Development Company, L.P.
-*
-* This library is free software; you can redistribute it and/or modify
-* it under the terms of the MIT license. See COPYING for details.
-*
-* @brief json-c forces clients to use its private data
-* structures for JSON Object iteration. This API
-* corrects that by abstracting the private json-c
-* details.
-*
-* API attributes: <br>
-* * Thread-safe: NO<br>
-* * Reentrant: NO
-*
-*******************************************************************************
-*/
-
-
-#ifndef JSON_OBJECT_ITERATOR_H
-#define JSON_OBJECT_ITERATOR_H
-
-#include <stddef.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * Forward declaration for the opaque iterator information.
- */
-struct json_object_iter_info_;
-
-/**
- * The opaque iterator that references a name/value pair within
- * a JSON Object instance or the "end" iterator value.
- */
-struct json_object_iterator {
- const void* opaque_;
-};
-
-
-/**
- * forward declaration of json-c's JSON value instance structure
- */
-struct json_object;
-
-
-/**
- * Initializes an iterator structure to a "default" value that
- * is convenient for initializing an iterator variable to a
- * default state (e.g., initialization list in a class'
- * constructor).
- *
- * @code
- * struct json_object_iterator iter = json_object_iter_init_default();
- * MyClass() : iter_(json_object_iter_init_default())
- * @endcode
- *
- * @note The initialized value doesn't reference any specific
- * pair, is considered an invalid iterator, and MUST NOT
- * be passed to any json-c API that expects a valid
- * iterator.
- *
- * @note User and internal code MUST NOT make any assumptions
- * about and dependencies on the value of the "default"
- * iterator value.
- *
- * @return json_object_iterator
- */
-struct json_object_iterator
-json_object_iter_init_default(void);
-
-/** Retrieves an iterator to the first pair of the JSON Object.
- *
- * @warning Any modification of the underlying pair invalidates all
- * iterators to that pair.
- *
- * @param obj JSON Object instance (MUST be of type json_object)
- *
- * @return json_object_iterator If the JSON Object has at
- * least one pair, on return, the iterator refers
- * to the first pair. If the JSON Object doesn't
- * have any pairs, the returned iterator is
- * equivalent to the "end" iterator for the same
- * JSON Object instance.
- *
- * @code
- * struct json_object_iterator it;
- * struct json_object_iterator itEnd;
- * struct json_object* obj;
- *
- * obj = json_tokener_parse("{'first':'george', 'age':100}");
- * it = json_object_iter_begin(obj);
- * itEnd = json_object_iter_end(obj);
- *
- * while (!json_object_iter_equal(&it, &itEnd)) {
- * printf("%s\n",
- * json_object_iter_peek_name(&it));
- * json_object_iter_next(&it);
- * }
- *
- * @endcode
- */
-struct json_object_iterator
-json_object_iter_begin(struct json_object* obj);
-
-/** Retrieves the iterator that represents the position beyond the
- * last pair of the given JSON Object instance.
- *
- * @warning Do NOT write code that assumes that the "end"
- * iterator value is NULL, even if it is so in a
- * particular instance of the implementation.
- *
- * @note The reason we do not (and MUST NOT) provide
- * "json_object_iter_is_end(json_object_iterator* iter)"
- * type of API is because it would limit the underlying
- * representation of name/value containment (or force us
- * to add additional, otherwise unnecessary, fields to
- * the iterator structure). The "end" iterator and the
- * equality test method, on the other hand, permit us to
- * cleanly abstract pretty much any reasonable underlying
- * representation without burdening the iterator
- * structure with unnecessary data.
- *
- * @note For performance reasons, memorize the "end" iterator prior
- * to any loop.
- *
- * @param obj JSON Object instance (MUST be of type json_object)
- *
- * @return json_object_iterator On return, the iterator refers
- * to the "end" of the Object instance's pairs
- * (i.e., NOT the last pair, but "beyond the last
- * pair" value)
- */
-struct json_object_iterator
-json_object_iter_end(const struct json_object* obj);
-
-/** Returns an iterator to the next pair, if any
- *
- * @warning Any modification of the underlying pair
- * invalidates all iterators to that pair.
- *
- * @param iter [IN/OUT] Pointer to iterator that references a
- * name/value pair; MUST be a valid, non-end iterator.
- * WARNING: bad things will happen if invalid or "end"
- * iterator is passed. Upon return will contain the
- * reference to the next pair if there is one; if there
- * are no more pairs, will contain the "end" iterator
- * value, which may be compared against the return value
- * of json_object_iter_end() for the same JSON Object
- * instance.
- */
-void
-json_object_iter_next(struct json_object_iterator* iter);
-
-
-/** Returns a const pointer to the name of the pair referenced
- * by the given iterator.
- *
- * @param iter pointer to iterator that references a name/value
- * pair; MUST be a valid, non-end iterator.
- *
- * @warning bad things will happen if an invalid or
- * "end" iterator is passed.
- *
- * @return const char* Pointer to the name of the referenced
- * name/value pair. The name memory belongs to the
- * name/value pair, will be freed when the pair is
- * deleted or modified, and MUST NOT be modified or
- * freed by the user.
- */
-const char*
-json_object_iter_peek_name(const struct json_object_iterator* iter);
-
-
-/** Returns a pointer to the json-c instance representing the
- * value of the referenced name/value pair, without altering
- * the instance's reference count.
- *
- * @param iter pointer to iterator that references a name/value
- * pair; MUST be a valid, non-end iterator.
- *
- * @warning bad things will happen if invalid or
- * "end" iterator is passed.
- *
- * @return struct json_object* Pointer to the json-c value
- * instance of the referenced name/value pair; the
- * value's reference count is not changed by this
- * function: if you plan to hold on to this json-c node,
- * take a look at json_object_get() and
- * json_object_put(). IMPORTANT: json-c API represents
- * the JSON Null value as a NULL json_object instance
- * pointer.
- */
-struct json_object*
-json_object_iter_peek_value(const struct json_object_iterator* iter);
-
-
-/** Tests two iterators for equality. Typically used to test
- * for end of iteration by comparing an iterator to the
- * corresponding "end" iterator (that was derived from the same
- * JSON Object instance).
- *
- * @note The reason we do not (and MUST NOT) provide
- * "json_object_iter_is_end(json_object_iterator* iter)"
- * type of API is because it would limit the underlying
- * representation of name/value containment (or force us
- * to add additional, otherwise unnecessary, fields to
- * the iterator structure). The equality test method, on
- * the other hand, permits us to cleanly abstract pretty
- * much any reasonable underlying representation.
- *
- * @param iter1 Pointer to first valid, non-NULL iterator
- * @param iter2 POinter to second valid, non-NULL iterator
- *
- * @warning if a NULL iterator pointer or an uninitialized
- * or invalid iterator, or iterators derived from
- * different JSON Object instances are passed, bad things
- * will happen!
- *
- * @return json_bool non-zero if iterators are equal (i.e., both
- * reference the same name/value pair or are both at
- * "end"); zero if they are not equal.
- */
-json_bool
-json_object_iter_equal(const struct json_object_iterator* iter1,
- const struct json_object_iterator* iter2);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* JSON_OBJECT_ITERATOR_H */
diff --git a/json-c/json_object_private.h b/json-c/json_object_private.h
deleted file mode 100644
index 5ed791b..0000000
--- a/json-c/json_object_private.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * $Id: json_object_private.h,v 1.4 2006/01/26 02:16:28 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _json_object_private_h_
-#define _json_object_private_h_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef void (json_object_private_delete_fn)(struct json_object *o);
-
-struct json_object
-{
- enum json_type o_type;
- json_object_private_delete_fn *_delete;
- json_object_to_json_string_fn *_to_json_string;
- int _ref_count;
- struct printbuf *_pb;
- union data {
- json_bool c_boolean;
- double c_double;
- int64_t c_int64;
- struct lh_table *c_object;
- struct array_list *c_array;
- struct {
- char *str;
- int len;
- } c_string;
- } o;
- json_object_delete_fn *_user_delete;
- void *_userdata;
-};
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/json_tokener.c b/json-c/json_tokener.c
deleted file mode 100644
index 60e81f2..0000000
--- a/json-c/json_tokener.c
+++ /dev/null
@@ -1,887 +0,0 @@
-/*
- * $Id: json_tokener.c,v 1.20 2006/07/25 03:24:50 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- *
- * Copyright (c) 2008-2009 Yahoo! Inc. All rights reserved.
- * The copyrights to the contents of this file are licensed under the MIT License
- * (http://www.opensource.org/licenses/mit-license.php)
- */
-
-#include "config.h"
-
-#include <math.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <ctype.h>
-#include <string.h>
-#include <limits.h>
-
-#include "debug.h"
-#include "printbuf.h"
-#include "arraylist.h"
-#include "json_inttypes.h"
-#include "json_object.h"
-#include "json_tokener.h"
-#include "json_util.h"
-
-#ifdef HAVE_LOCALE_H
-#include <locale.h>
-#endif /* HAVE_LOCALE_H */
-
-#define jt_hexdigit(x) (((x) <= '9') ? (x) - '0' : ((x) & 7) + 9)
-
-#if !HAVE_STRDUP && defined(_MSC_VER)
- /* MSC has the version as _strdup */
-# define strdup _strdup
-#elif !HAVE_STRDUP
-# error You do not have strdup on your system.
-#endif /* HAVE_STRDUP */
-
-#if !HAVE_STRNCASECMP && defined(_MSC_VER)
- /* MSC has the version as _strnicmp */
-# define strncasecmp _strnicmp
-#elif !HAVE_STRNCASECMP
-# error You do not have strncasecmp on your system.
-#endif /* HAVE_STRNCASECMP */
-
-/* Use C99 NAN by default; if not available, nan("") should work too. */
-#ifndef NAN
-#define NAN nan("")
-#endif /* !NAN */
-
-static const char json_null_str[] = "null";
-static const int json_null_str_len = sizeof(json_null_str) - 1;
-static const char json_inf_str[] = "Infinity";
-static const int json_inf_str_len = sizeof(json_inf_str) - 1;
-static const char json_nan_str[] = "NaN";
-static const int json_nan_str_len = sizeof(json_nan_str) - 1;
-static const char json_true_str[] = "true";
-static const int json_true_str_len = sizeof(json_true_str) - 1;
-static const char json_false_str[] = "false";
-static const int json_false_str_len = sizeof(json_false_str) - 1;
-
-static const char* json_tokener_errors[] = {
- "success",
- "continue",
- "nesting too deep",
- "unexpected end of data",
- "unexpected character",
- "null expected",
- "boolean expected",
- "number expected",
- "array value separator ',' expected",
- "quoted object property name expected",
- "object property name separator ':' expected",
- "object value separator ',' expected",
- "invalid string sequence",
- "expected comment",
- "buffer size overflow"
-};
-
-const char *json_tokener_error_desc(enum json_tokener_error jerr)
-{
- int jerr_int = (int)jerr;
- if (jerr_int < 0 || jerr_int >= (int)(sizeof(json_tokener_errors) / sizeof(json_tokener_errors[0])))
- return "Unknown error, invalid json_tokener_error value passed to json_tokener_error_desc()";
- return json_tokener_errors[jerr];
-}
-
-enum json_tokener_error json_tokener_get_error(json_tokener *tok)
-{
- return tok->err;
-}
-
-/* Stuff for decoding unicode sequences */
-#define IS_HIGH_SURROGATE(uc) (((uc) & 0xFC00) == 0xD800)
-#define IS_LOW_SURROGATE(uc) (((uc) & 0xFC00) == 0xDC00)
-#define DECODE_SURROGATE_PAIR(hi,lo) ((((hi) & 0x3FF) << 10) + ((lo) & 0x3FF) + 0x10000)
-static unsigned char utf8_replacement_char[3] = { 0xEF, 0xBF, 0xBD };
-
-struct json_tokener* json_tokener_new_ex(int depth)
-{
- struct json_tokener *tok;
-
- tok = (struct json_tokener*)calloc(1, sizeof(struct json_tokener));
- if (!tok) return NULL;
- tok->stack = (struct json_tokener_srec *)calloc(depth, sizeof(struct json_tokener_srec));
- if (!tok->stack) {
- free(tok);
- return NULL;
- }
- tok->pb = printbuf_new();
- tok->max_depth = depth;
- json_tokener_reset(tok);
- return tok;
-}
-
-struct json_tokener* json_tokener_new(void)
-{
- return json_tokener_new_ex(JSON_TOKENER_DEFAULT_DEPTH);
-}
-
-void json_tokener_free(struct json_tokener *tok)
-{
- json_tokener_reset(tok);
- if (tok->pb) printbuf_free(tok->pb);
- if (tok->stack) free(tok->stack);
- free(tok);
-}
-
-static void json_tokener_reset_level(struct json_tokener *tok, int depth)
-{
- tok->stack[depth].state = json_tokener_state_eatws;
- tok->stack[depth].saved_state = json_tokener_state_start;
- json_object_put(tok->stack[depth].current);
- tok->stack[depth].current = NULL;
- free(tok->stack[depth].obj_field_name);
- tok->stack[depth].obj_field_name = NULL;
-}
-
-void json_tokener_reset(struct json_tokener *tok)
-{
- int i;
- if (!tok)
- return;
-
- for(i = tok->depth; i >= 0; i--)
- json_tokener_reset_level(tok, i);
- tok->depth = 0;
- tok->err = json_tokener_success;
-}
-
-struct json_object* json_tokener_parse(const char *str)
-{
- enum json_tokener_error jerr_ignored;
- struct json_object* obj;
- obj = json_tokener_parse_verbose(str, &jerr_ignored);
- return obj;
-}
-
-struct json_object* json_tokener_parse_verbose(const char *str, enum json_tokener_error *error)
-{
- struct json_tokener* tok;
- struct json_object* obj;
-
- tok = json_tokener_new();
- if (!tok)
- return NULL;
- obj = json_tokener_parse_ex(tok, str, -1);
- *error = tok->err;
- if(tok->err != json_tokener_success) {
- if (obj != NULL)
- json_object_put(obj);
- obj = NULL;
- }
-
- json_tokener_free(tok);
- return obj;
-}
-
-#define state tok->stack[tok->depth].state
-#define saved_state tok->stack[tok->depth].saved_state
-#define current tok->stack[tok->depth].current
-#define obj_field_name tok->stack[tok->depth].obj_field_name
-
-/* Optimization:
- * json_tokener_parse_ex() consumed a lot of CPU in its main loop,
- * iterating character-by character. A large performance boost is
- * achieved by using tighter loops to locally handle units such as
- * comments and strings. Loops that handle an entire token within
- * their scope also gather entire strings and pass them to
- * printbuf_memappend() in a single call, rather than calling
- * printbuf_memappend() one char at a time.
- *
- * PEEK_CHAR() and ADVANCE_CHAR() macros are used for code that is
- * common to both the main loop and the tighter loops.
- */
-
-/* PEEK_CHAR(dest, tok) macro:
- * Peeks at the current char and stores it in dest.
- * Returns 1 on success, sets tok->err and returns 0 if no more chars.
- * Implicit inputs: str, len vars
- */
-#define PEEK_CHAR(dest, tok) \
- (((tok)->char_offset == len) ? \
- (((tok)->depth == 0 && state == json_tokener_state_eatws && saved_state == json_tokener_state_finish) ? \
- (((tok)->err = json_tokener_success), 0) \
- : \
- (((tok)->err = json_tokener_continue), 0) \
- ) : \
- (((dest) = *str), 1) \
- )
-
-/* ADVANCE_CHAR() macro:
- * Incrementes str & tok->char_offset.
- * For convenience of existing conditionals, returns the old value of c (0 on eof)
- * Implicit inputs: c var
- */
-#define ADVANCE_CHAR(str, tok) \
- ( ++(str), ((tok)->char_offset)++, c)
-
-
-/* End optimization macro defs */
-
-
-struct json_object* json_tokener_parse_ex(struct json_tokener *tok,
- const char *str, int len)
-{
- struct json_object *obj = NULL;
- char c = '\1';
-#ifdef HAVE_SETLOCALE
- char *oldlocale=NULL, *tmplocale;
-
- tmplocale = setlocale(LC_NUMERIC, NULL);
- if (tmplocale) oldlocale = strdup(tmplocale);
- setlocale(LC_NUMERIC, "C");
-#endif
-
- tok->char_offset = 0;
- tok->err = json_tokener_success;
-
- /* this interface is presently not 64-bit clean due to the int len argument
- and the internal printbuf interface that takes 32-bit int len arguments
- so the function limits the maximum string size to INT32_MAX (2GB).
- If the function is called with len == -1 then strlen is called to check
- the string length is less than INT32_MAX (2GB) */
- if ((len < -1) || (len == -1 && strlen(str) > INT32_MAX)) {
- tok->err = json_tokener_error_size;
- return NULL;
- }
-
- while (PEEK_CHAR(c, tok)) {
-
- redo_char:
- switch(state) {
-
- case json_tokener_state_eatws:
- /* Advance until we change state */
- while (isspace((int)c)) {
- if ((!ADVANCE_CHAR(str, tok)) || (!PEEK_CHAR(c, tok)))
- goto out;
- }
- if(c == '/' && !(tok->flags & JSON_TOKENER_STRICT)) {
- printbuf_reset(tok->pb);
- printbuf_memappend_fast(tok->pb, &c, 1);
- state = json_tokener_state_comment_start;
- } else {
- state = saved_state;
- goto redo_char;
- }
- break;
-
- case json_tokener_state_start:
- switch(c) {
- case '{':
- state = json_tokener_state_eatws;
- saved_state = json_tokener_state_object_field_start;
- current = json_object_new_object();
- break;
- case '[':
- state = json_tokener_state_eatws;
- saved_state = json_tokener_state_array;
- current = json_object_new_array();
- break;
- case 'I':
- case 'i':
- state = json_tokener_state_inf;
- printbuf_reset(tok->pb);
- tok->st_pos = 0;
- goto redo_char;
- case 'N':
- case 'n':
- state = json_tokener_state_null; // or NaN
- printbuf_reset(tok->pb);
- tok->st_pos = 0;
- goto redo_char;
- case '\'':
- if (tok->flags & JSON_TOKENER_STRICT) {
- /* in STRICT mode only double-quote are allowed */
- tok->err = json_tokener_error_parse_unexpected;
- goto out;
- }
- case '"':
- state = json_tokener_state_string;
- printbuf_reset(tok->pb);
- tok->quote_char = c;
- break;
- case 'T':
- case 't':
- case 'F':
- case 'f':
- state = json_tokener_state_boolean;
- printbuf_reset(tok->pb);
- tok->st_pos = 0;
- goto redo_char;
-#if defined(__GNUC__)
- case '0' ... '9':
-#else
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
-#endif
- case '-':
- state = json_tokener_state_number;
- printbuf_reset(tok->pb);
- tok->is_double = 0;
- goto redo_char;
- default:
- tok->err = json_tokener_error_parse_unexpected;
- goto out;
- }
- break;
-
- case json_tokener_state_finish:
- if(tok->depth == 0) goto out;
- obj = json_object_get(current);
- json_tokener_reset_level(tok, tok->depth);
- tok->depth--;
- goto redo_char;
-
- case json_tokener_state_inf: /* aka starts with 'i' */
- {
- int size_inf;
- int is_negative = 0;
-
- printbuf_memappend_fast(tok->pb, &c, 1);
- size_inf = json_min(tok->st_pos+1, json_inf_str_len);
- char *infbuf = tok->pb->buf;
- if (*infbuf == '-')
- {
- infbuf++;
- is_negative = 1;
- }
- if ((!(tok->flags & JSON_TOKENER_STRICT) &&
- strncasecmp(json_inf_str, infbuf, size_inf) == 0) ||
- (strncmp(json_inf_str, infbuf, size_inf) == 0)
- )
- {
- if (tok->st_pos == json_inf_str_len)
- {
- current = json_object_new_double(is_negative ? -INFINITY : INFINITY);
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- goto redo_char;
- }
- } else {
- tok->err = json_tokener_error_parse_unexpected;
- goto out;
- }
- tok->st_pos++;
- }
- break;
- case json_tokener_state_null: /* aka starts with 'n' */
- {
- int size;
- int size_nan;
- printbuf_memappend_fast(tok->pb, &c, 1);
- size = json_min(tok->st_pos+1, json_null_str_len);
- size_nan = json_min(tok->st_pos+1, json_nan_str_len);
- if((!(tok->flags & JSON_TOKENER_STRICT) &&
- strncasecmp(json_null_str, tok->pb->buf, size) == 0)
- || (strncmp(json_null_str, tok->pb->buf, size) == 0)
- ) {
- if (tok->st_pos == json_null_str_len) {
- current = NULL;
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- goto redo_char;
- }
- }
- else if ((!(tok->flags & JSON_TOKENER_STRICT) &&
- strncasecmp(json_nan_str, tok->pb->buf, size_nan) == 0) ||
- (strncmp(json_nan_str, tok->pb->buf, size_nan) == 0)
- )
- {
- if (tok->st_pos == json_nan_str_len)
- {
- current = json_object_new_double(NAN);
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- goto redo_char;
- }
- } else {
- tok->err = json_tokener_error_parse_null;
- goto out;
- }
- tok->st_pos++;
- }
- break;
-
- case json_tokener_state_comment_start:
- if(c == '*') {
- state = json_tokener_state_comment;
- } else if(c == '/') {
- state = json_tokener_state_comment_eol;
- } else {
- tok->err = json_tokener_error_parse_comment;
- goto out;
- }
- printbuf_memappend_fast(tok->pb, &c, 1);
- break;
-
- case json_tokener_state_comment:
- {
- /* Advance until we change state */
- const char *case_start = str;
- while(c != '*') {
- if (!ADVANCE_CHAR(str, tok) || !PEEK_CHAR(c, tok)) {
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- goto out;
- }
- }
- printbuf_memappend_fast(tok->pb, case_start, 1+str-case_start);
- state = json_tokener_state_comment_end;
- }
- break;
-
- case json_tokener_state_comment_eol:
- {
- /* Advance until we change state */
- const char *case_start = str;
- while(c != '\n') {
- if (!ADVANCE_CHAR(str, tok) || !PEEK_CHAR(c, tok)) {
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- goto out;
- }
- }
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- MC_DEBUG("json_tokener_comment: %s\n", tok->pb->buf);
- state = json_tokener_state_eatws;
- }
- break;
-
- case json_tokener_state_comment_end:
- printbuf_memappend_fast(tok->pb, &c, 1);
- if(c == '/') {
- MC_DEBUG("json_tokener_comment: %s\n", tok->pb->buf);
- state = json_tokener_state_eatws;
- } else {
- state = json_tokener_state_comment;
- }
- break;
-
- case json_tokener_state_string:
- {
- /* Advance until we change state */
- const char *case_start = str;
- while(1) {
- if(c == tok->quote_char) {
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- current = json_object_new_string_len(tok->pb->buf, tok->pb->bpos);
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- break;
- } else if(c == '\\') {
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- saved_state = json_tokener_state_string;
- state = json_tokener_state_string_escape;
- break;
- }
- if (!ADVANCE_CHAR(str, tok) || !PEEK_CHAR(c, tok)) {
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- goto out;
- }
- }
- }
- break;
-
- case json_tokener_state_string_escape:
- switch(c) {
- case '"':
- case '\\':
- case '/':
- printbuf_memappend_fast(tok->pb, &c, 1);
- state = saved_state;
- break;
- case 'b':
- case 'n':
- case 'r':
- case 't':
- case 'f':
- if(c == 'b') printbuf_memappend_fast(tok->pb, "\b", 1);
- else if(c == 'n') printbuf_memappend_fast(tok->pb, "\n", 1);
- else if(c == 'r') printbuf_memappend_fast(tok->pb, "\r", 1);
- else if(c == 't') printbuf_memappend_fast(tok->pb, "\t", 1);
- else if(c == 'f') printbuf_memappend_fast(tok->pb, "\f", 1);
- state = saved_state;
- break;
- case 'u':
- tok->ucs_char = 0;
- tok->st_pos = 0;
- state = json_tokener_state_escape_unicode;
- break;
- default:
- tok->err = json_tokener_error_parse_string;
- goto out;
- }
- break;
-
- case json_tokener_state_escape_unicode:
- {
- unsigned int got_hi_surrogate = 0;
-
- /* Handle a 4-byte sequence, or two sequences if a surrogate pair */
- while(1) {
- if(strchr(json_hex_chars, c)) {
- tok->ucs_char += ((unsigned int)jt_hexdigit(c) << ((3-tok->st_pos++)*4));
- if(tok->st_pos == 4) {
- unsigned char unescaped_utf[4];
-
- if (got_hi_surrogate) {
- if (IS_LOW_SURROGATE(tok->ucs_char)) {
- /* Recalculate the ucs_char, then fall thru to process normally */
- tok->ucs_char = DECODE_SURROGATE_PAIR(got_hi_surrogate, tok->ucs_char);
- } else {
- /* Hi surrogate was not followed by a low surrogate */
- /* Replace the hi and process the rest normally */
- printbuf_memappend_fast(tok->pb, (char*)utf8_replacement_char, 3);
- }
- got_hi_surrogate = 0;
- }
-
- if (tok->ucs_char < 0x80) {
- unescaped_utf[0] = tok->ucs_char;
- printbuf_memappend_fast(tok->pb, (char*)unescaped_utf, 1);
- } else if (tok->ucs_char < 0x800) {
- unescaped_utf[0] = 0xc0 | (tok->ucs_char >> 6);
- unescaped_utf[1] = 0x80 | (tok->ucs_char & 0x3f);
- printbuf_memappend_fast(tok->pb, (char*)unescaped_utf, 2);
- } else if (IS_HIGH_SURROGATE(tok->ucs_char)) {
- /* Got a high surrogate. Remember it and look for the
- * the beginning of another sequence, which should be the
- * low surrogate.
- */
- got_hi_surrogate = tok->ucs_char;
- /* Not at end, and the next two chars should be "\u" */
- if ((tok->char_offset+1 != len) &&
- (tok->char_offset+2 != len) &&
- (str[1] == '\\') &&
- (str[2] == 'u'))
- {
- /* Advance through the 16 bit surrogate, and move on to the
- * next sequence. The next step is to process the following
- * characters.
- */
- if( !ADVANCE_CHAR(str, tok) || !ADVANCE_CHAR(str, tok) ) {
- printbuf_memappend_fast(tok->pb, (char*)utf8_replacement_char, 3);
- }
- /* Advance to the first char of the next sequence and
- * continue processing with the next sequence.
- */
- if (!ADVANCE_CHAR(str, tok) || !PEEK_CHAR(c, tok)) {
- printbuf_memappend_fast(tok->pb, (char*)utf8_replacement_char, 3);
- goto out;
- }
- tok->ucs_char = 0;
- tok->st_pos = 0;
- continue; /* other json_tokener_state_escape_unicode */
- } else {
- /* Got a high surrogate without another sequence following
- * it. Put a replacement char in for the hi surrogate
- * and pretend we finished.
- */
- printbuf_memappend_fast(tok->pb, (char*)utf8_replacement_char, 3);
- }
- } else if (IS_LOW_SURROGATE(tok->ucs_char)) {
- /* Got a low surrogate not preceded by a high */
- printbuf_memappend_fast(tok->pb, (char*)utf8_replacement_char, 3);
- } else if (tok->ucs_char < 0x10000) {
- unescaped_utf[0] = 0xe0 | (tok->ucs_char >> 12);
- unescaped_utf[1] = 0x80 | ((tok->ucs_char >> 6) & 0x3f);
- unescaped_utf[2] = 0x80 | (tok->ucs_char & 0x3f);
- printbuf_memappend_fast(tok->pb, (char*)unescaped_utf, 3);
- } else if (tok->ucs_char < 0x110000) {
- unescaped_utf[0] = 0xf0 | ((tok->ucs_char >> 18) & 0x07);
- unescaped_utf[1] = 0x80 | ((tok->ucs_char >> 12) & 0x3f);
- unescaped_utf[2] = 0x80 | ((tok->ucs_char >> 6) & 0x3f);
- unescaped_utf[3] = 0x80 | (tok->ucs_char & 0x3f);
- printbuf_memappend_fast(tok->pb, (char*)unescaped_utf, 4);
- } else {
- /* Don't know what we got--insert the replacement char */
- printbuf_memappend_fast(tok->pb, (char*)utf8_replacement_char, 3);
- }
- state = saved_state;
- break;
- }
- } else {
- tok->err = json_tokener_error_parse_string;
- goto out;
- }
- if (!ADVANCE_CHAR(str, tok) || !PEEK_CHAR(c, tok)) {
- if (got_hi_surrogate) /* Clean up any pending chars */
- printbuf_memappend_fast(tok->pb, (char*)utf8_replacement_char, 3);
- goto out;
- }
- }
- }
- break;
-
- case json_tokener_state_boolean:
- {
- int size1, size2;
- printbuf_memappend_fast(tok->pb, &c, 1);
- size1 = json_min(tok->st_pos+1, json_true_str_len);
- size2 = json_min(tok->st_pos+1, json_false_str_len);
- if((!(tok->flags & JSON_TOKENER_STRICT) &&
- strncasecmp(json_true_str, tok->pb->buf, size1) == 0)
- || (strncmp(json_true_str, tok->pb->buf, size1) == 0)
- ) {
- if(tok->st_pos == json_true_str_len) {
- current = json_object_new_boolean(1);
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- goto redo_char;
- }
- } else if((!(tok->flags & JSON_TOKENER_STRICT) &&
- strncasecmp(json_false_str, tok->pb->buf, size2) == 0)
- || (strncmp(json_false_str, tok->pb->buf, size2) == 0)) {
- if(tok->st_pos == json_false_str_len) {
- current = json_object_new_boolean(0);
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- goto redo_char;
- }
- } else {
- tok->err = json_tokener_error_parse_boolean;
- goto out;
- }
- tok->st_pos++;
- }
- break;
-
- case json_tokener_state_number:
- {
- /* Advance until we change state */
- const char *case_start = str;
- int case_len=0;
- while(c && strchr(json_number_chars, c)) {
- ++case_len;
- if(c == '.' || c == 'e' || c == 'E')
- tok->is_double = 1;
- if (!ADVANCE_CHAR(str, tok) || !PEEK_CHAR(c, tok)) {
- printbuf_memappend_fast(tok->pb, case_start, case_len);
- goto out;
- }
- }
- if (case_len>0)
- printbuf_memappend_fast(tok->pb, case_start, case_len);
-
- // Check for -Infinity
- if (tok->pb->buf[0] == '-' && case_len == 1 &&
- (c == 'i' || c == 'I'))
- {
- state = json_tokener_state_inf;
- goto redo_char;
- }
- }
- {
- int64_t num64;
- double numd;
- if (!tok->is_double && json_parse_int64(tok->pb->buf, &num64) == 0) {
- if (num64 && tok->pb->buf[0]=='0' && (tok->flags & JSON_TOKENER_STRICT)) {
- /* in strict mode, number must not start with 0 */
- tok->err = json_tokener_error_parse_number;
- goto out;
- }
- current = json_object_new_int64(num64);
- }
- else if(tok->is_double && json_parse_double(tok->pb->buf, &numd) == 0)
- {
- current = json_object_new_double_s(numd, tok->pb->buf);
- } else {
- tok->err = json_tokener_error_parse_number;
- goto out;
- }
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- goto redo_char;
- }
- break;
-
- case json_tokener_state_array_after_sep:
- case json_tokener_state_array:
- if(c == ']') {
- if (state == json_tokener_state_array_after_sep &&
- (tok->flags & JSON_TOKENER_STRICT))
- {
- tok->err = json_tokener_error_parse_unexpected;
- goto out;
- }
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- } else {
- if(tok->depth >= tok->max_depth-1) {
- tok->err = json_tokener_error_depth;
- goto out;
- }
- state = json_tokener_state_array_add;
- tok->depth++;
- json_tokener_reset_level(tok, tok->depth);
- goto redo_char;
- }
- break;
-
- case json_tokener_state_array_add:
- json_object_array_add(current, obj);
- saved_state = json_tokener_state_array_sep;
- state = json_tokener_state_eatws;
- goto redo_char;
-
- case json_tokener_state_array_sep:
- if(c == ']') {
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- } else if(c == ',') {
- saved_state = json_tokener_state_array_after_sep;
- state = json_tokener_state_eatws;
- } else {
- tok->err = json_tokener_error_parse_array;
- goto out;
- }
- break;
-
- case json_tokener_state_object_field_start:
- case json_tokener_state_object_field_start_after_sep:
- if(c == '}') {
- if (state == json_tokener_state_object_field_start_after_sep &&
- (tok->flags & JSON_TOKENER_STRICT))
- {
- tok->err = json_tokener_error_parse_unexpected;
- goto out;
- }
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- } else if (c == '"' || c == '\'') {
- tok->quote_char = c;
- printbuf_reset(tok->pb);
- state = json_tokener_state_object_field;
- } else {
- tok->err = json_tokener_error_parse_object_key_name;
- goto out;
- }
- break;
-
- case json_tokener_state_object_field:
- {
- /* Advance until we change state */
- const char *case_start = str;
- while(1) {
- if(c == tok->quote_char) {
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- obj_field_name = strdup(tok->pb->buf);
- saved_state = json_tokener_state_object_field_end;
- state = json_tokener_state_eatws;
- break;
- } else if(c == '\\') {
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- saved_state = json_tokener_state_object_field;
- state = json_tokener_state_string_escape;
- break;
- }
- if (!ADVANCE_CHAR(str, tok) || !PEEK_CHAR(c, tok)) {
- printbuf_memappend_fast(tok->pb, case_start, str-case_start);
- goto out;
- }
- }
- }
- break;
-
- case json_tokener_state_object_field_end:
- if(c == ':') {
- saved_state = json_tokener_state_object_value;
- state = json_tokener_state_eatws;
- } else {
- tok->err = json_tokener_error_parse_object_key_sep;
- goto out;
- }
- break;
-
- case json_tokener_state_object_value:
- if(tok->depth >= tok->max_depth-1) {
- tok->err = json_tokener_error_depth;
- goto out;
- }
- state = json_tokener_state_object_value_add;
- tok->depth++;
- json_tokener_reset_level(tok, tok->depth);
- goto redo_char;
-
- case json_tokener_state_object_value_add:
- json_object_object_add(current, obj_field_name, obj);
- free(obj_field_name);
- obj_field_name = NULL;
- saved_state = json_tokener_state_object_sep;
- state = json_tokener_state_eatws;
- goto redo_char;
-
- case json_tokener_state_object_sep:
- if(c == '}') {
- saved_state = json_tokener_state_finish;
- state = json_tokener_state_eatws;
- } else if(c == ',') {
- saved_state = json_tokener_state_object_field_start_after_sep;
- state = json_tokener_state_eatws;
- } else {
- tok->err = json_tokener_error_parse_object_value_sep;
- goto out;
- }
- break;
-
- }
- if (!ADVANCE_CHAR(str, tok))
- goto out;
- } /* while(POP_CHAR) */
-
- out:
- if (c &&
- (state == json_tokener_state_finish) &&
- (tok->depth == 0) &&
- (tok->flags & JSON_TOKENER_STRICT)) {
- /* unexpected char after JSON data */
- tok->err = json_tokener_error_parse_unexpected;
- }
- if (!c) { /* We hit an eof char (0) */
- if(state != json_tokener_state_finish &&
- saved_state != json_tokener_state_finish)
- tok->err = json_tokener_error_parse_eof;
- }
-
-#ifdef HAVE_SETLOCALE
- setlocale(LC_NUMERIC, oldlocale);
- if (oldlocale) free(oldlocale);
-#endif
-
- if (tok->err == json_tokener_success)
- {
- json_object *ret = json_object_get(current);
- int ii;
-
- /* Partially reset, so we parse additional objects on subsequent calls. */
- for(ii = tok->depth; ii >= 0; ii--)
- json_tokener_reset_level(tok, ii);
- return ret;
- }
-
- MC_DEBUG("json_tokener_parse_ex: error %s at offset %d\n",
- json_tokener_errors[tok->err], tok->char_offset);
- return NULL;
-}
-
-void json_tokener_set_flags(struct json_tokener *tok, int flags)
-{
- tok->flags = flags;
-}
diff --git a/json-c/json_tokener.h b/json-c/json_tokener.h
deleted file mode 100644
index a72d2bd..0000000
--- a/json-c/json_tokener.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * $Id: json_tokener.h,v 1.10 2006/07/25 03:24:50 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _json_tokener_h_
-#define _json_tokener_h_
-
-#include <stddef.h>
-#include "json_object.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-enum json_tokener_error {
- json_tokener_success,
- json_tokener_continue,
- json_tokener_error_depth,
- json_tokener_error_parse_eof,
- json_tokener_error_parse_unexpected,
- json_tokener_error_parse_null,
- json_tokener_error_parse_boolean,
- json_tokener_error_parse_number,
- json_tokener_error_parse_array,
- json_tokener_error_parse_object_key_name,
- json_tokener_error_parse_object_key_sep,
- json_tokener_error_parse_object_value_sep,
- json_tokener_error_parse_string,
- json_tokener_error_parse_comment,
- json_tokener_error_size
-};
-
-enum json_tokener_state {
- json_tokener_state_eatws,
- json_tokener_state_start,
- json_tokener_state_finish,
- json_tokener_state_null,
- json_tokener_state_comment_start,
- json_tokener_state_comment,
- json_tokener_state_comment_eol,
- json_tokener_state_comment_end,
- json_tokener_state_string,
- json_tokener_state_string_escape,
- json_tokener_state_escape_unicode,
- json_tokener_state_boolean,
- json_tokener_state_number,
- json_tokener_state_array,
- json_tokener_state_array_add,
- json_tokener_state_array_sep,
- json_tokener_state_object_field_start,
- json_tokener_state_object_field,
- json_tokener_state_object_field_end,
- json_tokener_state_object_value,
- json_tokener_state_object_value_add,
- json_tokener_state_object_sep,
- json_tokener_state_array_after_sep,
- json_tokener_state_object_field_start_after_sep,
- json_tokener_state_inf
-};
-
-struct json_tokener_srec
-{
- enum json_tokener_state state, saved_state;
- struct json_object *obj;
- struct json_object *current;
- char *obj_field_name;
-};
-
-#define JSON_TOKENER_DEFAULT_DEPTH 32
-
-struct json_tokener
-{
- char *str;
- struct printbuf *pb;
- int max_depth, depth, is_double, st_pos, char_offset;
- enum json_tokener_error err;
- unsigned int ucs_char;
- char quote_char;
- struct json_tokener_srec *stack;
- int flags;
-};
-
-/**
- * Be strict when parsing JSON input. Use caution with
- * this flag as what is considered valid may become more
- * restrictive from one release to the next, causing your
- * code to fail on previously working input.
- *
- * This flag is not set by default.
- *
- * @see json_tokener_set_flags()
- */
-#define JSON_TOKENER_STRICT 0x01
-
-/**
- * Given an error previously returned by json_tokener_get_error(),
- * return a human readable description of the error.
- *
- * @return a generic error message is returned if an invalid error value is provided.
- */
-const char *json_tokener_error_desc(enum json_tokener_error jerr);
-
-/**
- * Retrieve the error caused by the last call to json_tokener_parse_ex(),
- * or json_tokener_success if there is no error.
- *
- * When parsing a JSON string in pieces, if the tokener is in the middle
- * of parsing this will return json_tokener_continue.
- *
- * See also json_tokener_error_desc().
- */
-enum json_tokener_error json_tokener_get_error(struct json_tokener *tok);
-
-extern struct json_tokener* json_tokener_new(void);
-extern struct json_tokener* json_tokener_new_ex(int depth);
-extern void json_tokener_free(struct json_tokener *tok);
-extern void json_tokener_reset(struct json_tokener *tok);
-extern struct json_object* json_tokener_parse(const char *str);
-extern struct json_object* json_tokener_parse_verbose(const char *str, enum json_tokener_error *error);
-
-/**
- * Set flags that control how parsing will be done.
- */
-extern void json_tokener_set_flags(struct json_tokener *tok, int flags);
-
-/**
- * Parse a string and return a non-NULL json_object if a valid JSON value
- * is found. The string does not need to be a JSON object or array;
- * it can also be a string, number or boolean value.
- *
- * A partial JSON string can be parsed. If the parsing is incomplete,
- * NULL will be returned and json_tokener_get_error() will be return
- * json_tokener_continue.
- * json_tokener_parse_ex() can then be called with additional bytes in str
- * to continue the parsing.
- *
- * If json_tokener_parse_ex() returns NULL and the error anything other than
- * json_tokener_continue, a fatal error has occurred and parsing must be
- * halted. Then tok object must not be re-used until json_tokener_reset() is
- * called.
- *
- * When a valid JSON value is parsed, a non-NULL json_object will be
- * returned. Also, json_tokener_get_error() will return json_tokener_success.
- * Be sure to check the type with json_object_is_type() or
- * json_object_get_type() before using the object.
- *
- * @b XXX this shouldn't use internal fields:
- * Trailing characters after the parsed value do not automatically cause an
- * error. It is up to the caller to decide whether to treat this as an
- * error or to handle the additional characters, perhaps by parsing another
- * json value starting from that point.
- *
- * Extra characters can be detected by comparing the tok->char_offset against
- * the length of the last len parameter passed in.
- *
- * The tokener does \b not maintain an internal buffer so the caller is
- * responsible for calling json_tokener_parse_ex with an appropriate str
- * parameter starting with the extra characters.
- *
- * This interface is presently not 64-bit clean due to the int len argument
- * so the function limits the maximum string size to INT32_MAX (2GB).
- * If the function is called with len == -1 then strlen is called to check
- * the string length is less than INT32_MAX (2GB)
- *
- * Example:
- * @code
-json_object *jobj = NULL;
-const char *mystring = NULL;
-int stringlen = 0;
-enum json_tokener_error jerr;
-do {
- mystring = ... // get JSON string, e.g. read from file, etc...
- stringlen = strlen(mystring);
- jobj = json_tokener_parse_ex(tok, mystring, stringlen);
-} while ((jerr = json_tokener_get_error(tok)) == json_tokener_continue);
-if (jerr != json_tokener_success)
-{
- fprintf(stderr, "Error: %s\n", json_tokener_error_desc(jerr));
- // Handle errors, as appropriate for your application.
-}
-if (tok->char_offset < stringlen) // XXX shouldn't access internal fields
-{
- // Handle extra characters after parsed object as desired.
- // e.g. issue an error, parse another object from that point, etc...
-}
-// Success, use jobj here.
-
-@endcode
- *
- * @param tok a json_tokener previously allocated with json_tokener_new()
- * @param str an string with any valid JSON expression, or portion of. This does not need to be null terminated.
- * @param len the length of str
- */
-extern struct json_object* json_tokener_parse_ex(struct json_tokener *tok,
- const char *str, int len);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/json_util.c b/json-c/json_util.c
deleted file mode 100644
index 2a5621b..0000000
--- a/json-c/json_util.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * $Id: json_util.c,v 1.4 2006/01/30 23:07:57 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#include "config.h"
-#undef realloc
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <limits.h>
-#include <string.h>
-#include <errno.h>
-#include <ctype.h>
-
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif /* HAVE_SYS_TYPES_H */
-
-#ifdef HAVE_SYS_STAT_H
-#include <sys/stat.h>
-#endif /* HAVE_SYS_STAT_H */
-
-#ifdef HAVE_FCNTL_H
-#include <fcntl.h>
-#endif /* HAVE_FCNTL_H */
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif /* HAVE_UNISTD_H */
-
-#ifdef WIN32
-# define WIN32_LEAN_AND_MEAN
-# include <windows.h>
-# include <io.h>
-#endif /* defined(WIN32) */
-
-#if !defined(HAVE_OPEN) && defined(WIN32)
-# define open _open
-#endif
-
-#if !defined(HAVE_SNPRINTF) && defined(_MSC_VER)
- /* MSC has the version as _snprintf */
-# define snprintf _snprintf
-#elif !defined(HAVE_SNPRINTF)
-# error You do not have snprintf on your system.
-#endif /* HAVE_SNPRINTF */
-
-#include "debug.h"
-#include "printbuf.h"
-#include "json_inttypes.h"
-#include "json_object.h"
-#include "json_tokener.h"
-#include "json_util.h"
-
-static int sscanf_is_broken = 0;
-static int sscanf_is_broken_testdone = 0;
-static void sscanf_is_broken_test(void);
-
-struct json_object* json_object_from_file(const char *filename)
-{
- struct printbuf *pb;
- struct json_object *obj;
- char buf[JSON_FILE_BUF_SIZE];
- int fd, ret;
-
- if((fd = open(filename, O_RDONLY)) < 0) {
- MC_ERROR("json_object_from_file: error opening file %s: %s\n",
- filename, strerror(errno));
- return NULL;
- }
- if(!(pb = printbuf_new())) {
- close(fd);
- MC_ERROR("json_object_from_file: printbuf_new failed\n");
- return NULL;
- }
- while((ret = read(fd, buf, JSON_FILE_BUF_SIZE)) > 0) {
- printbuf_memappend(pb, buf, ret);
- }
- close(fd);
- if(ret < 0) {
- MC_ERROR("json_object_from_file: error reading file %s: %s\n",
- filename, strerror(errno));
- printbuf_free(pb);
- return NULL;
- }
- obj = json_tokener_parse(pb->buf);
- printbuf_free(pb);
- return obj;
-}
-
-/* extended "format and write to file" function */
-
-int json_object_to_file_ext(const char *filename, struct json_object *obj, int flags)
-{
- const char *json_str;
- int fd, ret;
- unsigned int wpos, wsize;
-
- if(!obj) {
- MC_ERROR("json_object_to_file: object is null\n");
- return -1;
- }
-
- if((fd = open(filename, O_WRONLY | O_TRUNC | O_CREAT, 0644)) < 0) {
- MC_ERROR("json_object_to_file: error opening file %s: %s\n",
- filename, strerror(errno));
- return -1;
- }
-
- if(!(json_str = json_object_to_json_string_ext(obj,flags))) {
- close(fd);
- return -1;
- }
-
- wsize = (unsigned int)(strlen(json_str) & UINT_MAX); /* CAW: probably unnecessary, but the most 64bit safe */
- wpos = 0;
- while(wpos < wsize) {
- if((ret = write(fd, json_str + wpos, wsize-wpos)) < 0) {
- close(fd);
- MC_ERROR("json_object_to_file: error writing file %s: %s\n",
- filename, strerror(errno));
- return -1;
- }
-
- /* because of the above check for ret < 0, we can safely cast and add */
- wpos += (unsigned int)ret;
- }
-
- close(fd);
- return 0;
-}
-
-// backwards compatible "format and write to file" function
-
-int json_object_to_file(const char *filename, struct json_object *obj)
-{
- return json_object_to_file_ext(filename, obj, JSON_C_TO_STRING_PLAIN);
-}
-
-int json_parse_double(const char *buf, double *retval)
-{
- return (sscanf(buf, "%lf", retval)==1 ? 0 : 1);
-}
-
-/*
- * Not all implementations of sscanf actually work properly.
- * Check whether the one we're currently using does, and if
- * it's broken, enable the workaround code.
- */
-static void sscanf_is_broken_test()
-{
- int64_t num64;
- int ret_errno, is_int64_min, ret_errno2, is_int64_max;
-
- (void)sscanf(" -01234567890123456789012345", "%" SCNd64, &num64);
- ret_errno = errno;
- is_int64_min = (num64 == INT64_MIN);
-
- (void)sscanf(" 01234567890123456789012345", "%" SCNd64, &num64);
- ret_errno2 = errno;
- is_int64_max = (num64 == INT64_MAX);
-
- if (ret_errno != ERANGE || !is_int64_min ||
- ret_errno2 != ERANGE || !is_int64_max)
- {
- MC_DEBUG("sscanf_is_broken_test failed, enabling workaround code\n");
- sscanf_is_broken = 1;
- }
-}
-
-int json_parse_int64(const char *buf, int64_t *retval)
-{
- int64_t num64;
- const char *buf_sig_digits;
- int orig_has_neg;
- int saved_errno;
-
- if (!sscanf_is_broken_testdone)
- {
- sscanf_is_broken_test();
- sscanf_is_broken_testdone = 1;
- }
-
- // Skip leading spaces
- while (isspace((int)*buf) && *buf)
- buf++;
-
- errno = 0; // sscanf won't always set errno, so initialize
- if (sscanf(buf, "%" SCNd64, &num64) != 1)
- {
- MC_DEBUG("Failed to parse, sscanf != 1\n");
- return 1;
- }
-
- saved_errno = errno;
- buf_sig_digits = buf;
- orig_has_neg = 0;
- if (*buf_sig_digits == '-')
- {
- buf_sig_digits++;
- orig_has_neg = 1;
- }
-
- // Not all sscanf implementations actually work
- if (sscanf_is_broken && saved_errno != ERANGE)
- {
- char buf_cmp[100];
- char *buf_cmp_start = buf_cmp;
- int recheck_has_neg = 0;
- int buf_cmp_len;
-
- // Skip leading zeros, but keep at least one digit
- while (buf_sig_digits[0] == '0' && buf_sig_digits[1] != '\0')
- buf_sig_digits++;
- if (num64 == 0) // assume all sscanf impl's will parse -0 to 0
- orig_has_neg = 0; // "-0" is the same as just plain "0"
-
- snprintf(buf_cmp_start, sizeof(buf_cmp), "%" PRId64, num64);
- if (*buf_cmp_start == '-')
- {
- recheck_has_neg = 1;
- buf_cmp_start++;
- }
- // No need to skip leading spaces or zeros here.
-
- buf_cmp_len = strlen(buf_cmp_start);
- /**
- * If the sign is different, or
- * some of the digits are different, or
- * there is another digit present in the original string
- * then we have NOT successfully parsed the value.
- */
- if (orig_has_neg != recheck_has_neg ||
- strncmp(buf_sig_digits, buf_cmp_start, strlen(buf_cmp_start)) != 0 ||
- ((int)strlen(buf_sig_digits) != buf_cmp_len &&
- isdigit((int)buf_sig_digits[buf_cmp_len])
- )
- )
- {
- saved_errno = ERANGE;
- }
- }
-
- // Not all sscanf impl's set the value properly when out of range.
- // Always do this, even for properly functioning implementations,
- // since it shouldn't slow things down much.
- if (saved_errno == ERANGE)
- {
- if (orig_has_neg)
- num64 = INT64_MIN;
- else
- num64 = INT64_MAX;
- }
- *retval = num64;
- return 0;
-}
-
-#ifndef HAVE_REALLOC
-void* rpl_realloc(void* p, size_t n)
-{
- if (n == 0)
- n = 1;
- if (p == 0)
- return malloc(n);
- return realloc(p, n);
-}
-#endif
-
-#define NELEM(a) (sizeof(a) / sizeof(a[0]))
-static const char* json_type_name[] = {
- /* If you change this, be sure to update the enum json_type definition too */
- "null",
- "boolean",
- "double",
- "int",
- "object",
- "array",
- "string",
-};
-
-const char *json_type_to_name(enum json_type o_type)
-{
- int o_type_int = (int)o_type;
- if (o_type_int < 0 || o_type_int >= (int)NELEM(json_type_name))
- {
- MC_ERROR("json_type_to_name: type %d is out of range [0,%d]\n", o_type, NELEM(json_type_name));
- return NULL;
- }
- return json_type_name[o_type];
-}
-
diff --git a/json-c/json_util.h b/json-c/json_util.h
deleted file mode 100644
index 387dbc4..0000000
--- a/json-c/json_util.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * $Id: json_util.h,v 1.4 2006/01/30 23:07:57 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _json_util_h_
-#define _json_util_h_
-
-#include "json_object.h"
-
-#ifndef json_min
-#define json_min(a,b) ((a) < (b) ? (a) : (b))
-#endif
-
-#ifndef json_max
-#define json_max(a,b) ((a) > (b) ? (a) : (b))
-#endif
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define JSON_FILE_BUF_SIZE 4096
-
-/* utility functions */
-extern struct json_object* json_object_from_file(const char *filename);
-extern int json_object_to_file(const char *filename, struct json_object *obj);
-extern int json_object_to_file_ext(const char *filename, struct json_object *obj, int flags);
-extern int json_parse_int64(const char *buf, int64_t *retval);
-extern int json_parse_double(const char *buf, double *retval);
-
-
-/**
- * Return a string describing the type of the object.
- * e.g. "int", or "object", etc...
- */
-extern const char *json_type_to_name(enum json_type o_type);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/libjson.c b/json-c/libjson.c
deleted file mode 100644
index 5284fd0..0000000
--- a/json-c/libjson.c
+++ /dev/null
@@ -1,26 +0,0 @@
-
-/* dummy source file for compatibility purposes */
-
-#if defined(HAVE_CDEFS_H)
-#include <sys/cdefs.h>
-#endif
-
-#ifndef __warn_references
-
-#if defined(__GNUC__) && defined (HAS_GNU_WARNING_LONG)
-
-#define __warn_references(sym,msg) \
- __asm__(".section .gnu" #sym ",\n\t.ascii \"" msg "\"\n\t.text");
-
-#else
-#define __warn_references(sym,msg) /* nothing */
-#endif
-
-#endif
-
-#include "json_object.h"
-
-__warn_references(json_object_get, "Warning: please link against libjson-c instead of libjson");
-
-/* __asm__(".section .gnu.warning." __STRING(sym) \
- " ; .ascii \"" msg "\" ; .text") */
diff --git a/json-c/linkhash.c b/json-c/linkhash.c
deleted file mode 100644
index 712c387..0000000
--- a/json-c/linkhash.c
+++ /dev/null
@@ -1,602 +0,0 @@
-/*
- * $Id: linkhash.c,v 1.4 2006/01/26 02:16:28 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- * Copyright (c) 2009 Hewlett-Packard Development Company, L.P.
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <stddef.h>
-#include <limits.h>
-
-#ifdef HAVE_ENDIAN_H
-# include <endian.h> /* attempt to define endianness */
-#endif
-
-#include "random_seed.h"
-#include "linkhash.h"
-
-void lh_abort(const char *msg, ...)
-{
- va_list ap;
- va_start(ap, msg);
- vprintf(msg, ap);
- va_end(ap);
- exit(1);
-}
-
-unsigned long lh_ptr_hash(const void *k)
-{
- /* CAW: refactored to be 64bit nice */
- return (unsigned long)((((ptrdiff_t)k * LH_PRIME) >> 4) & ULONG_MAX);
-}
-
-int lh_ptr_equal(const void *k1, const void *k2)
-{
- return (k1 == k2);
-}
-
-/*
- * hashlittle from lookup3.c, by Bob Jenkins, May 2006, Public Domain.
- * http://burtleburtle.net/bob/c/lookup3.c
- * minor modifications to make functions static so no symbols are exported
- * minor mofifications to compile with -Werror
- */
-
-/*
--------------------------------------------------------------------------------
-lookup3.c, by Bob Jenkins, May 2006, Public Domain.
-
-These are functions for producing 32-bit hashes for hash table lookup.
-hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final()
-are externally useful functions. Routines to test the hash are included
-if SELF_TEST is defined. You can use this free for any purpose. It's in
-the public domain. It has no warranty.
-
-You probably want to use hashlittle(). hashlittle() and hashbig()
-hash byte arrays. hashlittle() is is faster than hashbig() on
-little-endian machines. Intel and AMD are little-endian machines.
-On second thought, you probably want hashlittle2(), which is identical to
-hashlittle() except it returns two 32-bit hashes for the price of one.
-You could implement hashbig2() if you wanted but I haven't bothered here.
-
-If you want to find a hash of, say, exactly 7 integers, do
- a = i1; b = i2; c = i3;
- mix(a,b,c);
- a += i4; b += i5; c += i6;
- mix(a,b,c);
- a += i7;
- final(a,b,c);
-then use c as the hash value. If you have a variable length array of
-4-byte integers to hash, use hashword(). If you have a byte array (like
-a character string), use hashlittle(). If you have several byte arrays, or
-a mix of things, see the comments above hashlittle().
-
-Why is this so big? I read 12 bytes at a time into 3 4-byte integers,
-then mix those integers. This is fast (you can do a lot more thorough
-mixing with 12*3 instructions on 3 integers than you can with 3 instructions
-on 1 byte), but shoehorning those bytes into integers efficiently is messy.
--------------------------------------------------------------------------------
-*/
-
-/*
- * My best guess at if you are big-endian or little-endian. This may
- * need adjustment.
- */
-#if (defined(__BYTE_ORDER) && defined(__LITTLE_ENDIAN) && \
- __BYTE_ORDER == __LITTLE_ENDIAN) || \
- (defined(i386) || defined(__i386__) || defined(__i486__) || \
- defined(__i586__) || defined(__i686__) || defined(vax) || defined(MIPSEL))
-# define HASH_LITTLE_ENDIAN 1
-# define HASH_BIG_ENDIAN 0
-#elif (defined(__BYTE_ORDER) && defined(__BIG_ENDIAN) && \
- __BYTE_ORDER == __BIG_ENDIAN) || \
- (defined(sparc) || defined(POWERPC) || defined(mc68000) || defined(sel))
-# define HASH_LITTLE_ENDIAN 0
-# define HASH_BIG_ENDIAN 1
-#else
-# define HASH_LITTLE_ENDIAN 0
-# define HASH_BIG_ENDIAN 0
-#endif
-
-#define hashsize(n) ((uint32_t)1<<(n))
-#define hashmask(n) (hashsize(n)-1)
-#define rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
-
-/*
--------------------------------------------------------------------------------
-mix -- mix 3 32-bit values reversibly.
-
-This is reversible, so any information in (a,b,c) before mix() is
-still in (a,b,c) after mix().
-
-If four pairs of (a,b,c) inputs are run through mix(), or through
-mix() in reverse, there are at least 32 bits of the output that
-are sometimes the same for one pair and different for another pair.
-This was tested for:
-* pairs that differed by one bit, by two bits, in any combination
- of top bits of (a,b,c), or in any combination of bottom bits of
- (a,b,c).
-* "differ" is defined as +, -, ^, or ~^. For + and -, I transformed
- the output delta to a Gray code (a^(a>>1)) so a string of 1's (as
- is commonly produced by subtraction) look like a single 1-bit
- difference.
-* the base values were pseudorandom, all zero but one bit set, or
- all zero plus a counter that starts at zero.
-
-Some k values for my "a-=c; a^=rot(c,k); c+=b;" arrangement that
-satisfy this are
- 4 6 8 16 19 4
- 9 15 3 18 27 15
- 14 9 3 7 17 3
-Well, "9 15 3 18 27 15" didn't quite get 32 bits diffing
-for "differ" defined as + with a one-bit base and a two-bit delta. I
-used http://burtleburtle.net/bob/hash/avalanche.html to choose
-the operations, constants, and arrangements of the variables.
-
-This does not achieve avalanche. There are input bits of (a,b,c)
-that fail to affect some output bits of (a,b,c), especially of a. The
-most thoroughly mixed value is c, but it doesn't really even achieve
-avalanche in c.
-
-This allows some parallelism. Read-after-writes are good at doubling
-the number of bits affected, so the goal of mixing pulls in the opposite
-direction as the goal of parallelism. I did what I could. Rotates
-seem to cost as much as shifts on every machine I could lay my hands
-on, and rotates are much kinder to the top and bottom bits, so I used
-rotates.
--------------------------------------------------------------------------------
-*/
-#define mix(a,b,c) \
-{ \
- a -= c; a ^= rot(c, 4); c += b; \
- b -= a; b ^= rot(a, 6); a += c; \
- c -= b; c ^= rot(b, 8); b += a; \
- a -= c; a ^= rot(c,16); c += b; \
- b -= a; b ^= rot(a,19); a += c; \
- c -= b; c ^= rot(b, 4); b += a; \
-}
-
-/*
--------------------------------------------------------------------------------
-final -- final mixing of 3 32-bit values (a,b,c) into c
-
-Pairs of (a,b,c) values differing in only a few bits will usually
-produce values of c that look totally different. This was tested for
-* pairs that differed by one bit, by two bits, in any combination
- of top bits of (a,b,c), or in any combination of bottom bits of
- (a,b,c).
-* "differ" is defined as +, -, ^, or ~^. For + and -, I transformed
- the output delta to a Gray code (a^(a>>1)) so a string of 1's (as
- is commonly produced by subtraction) look like a single 1-bit
- difference.
-* the base values were pseudorandom, all zero but one bit set, or
- all zero plus a counter that starts at zero.
-
-These constants passed:
- 14 11 25 16 4 14 24
- 12 14 25 16 4 14 24
-and these came close:
- 4 8 15 26 3 22 24
- 10 8 15 26 3 22 24
- 11 8 15 26 3 22 24
--------------------------------------------------------------------------------
-*/
-#define final(a,b,c) \
-{ \
- c ^= b; c -= rot(b,14); \
- a ^= c; a -= rot(c,11); \
- b ^= a; b -= rot(a,25); \
- c ^= b; c -= rot(b,16); \
- a ^= c; a -= rot(c,4); \
- b ^= a; b -= rot(a,14); \
- c ^= b; c -= rot(b,24); \
-}
-
-
-/*
--------------------------------------------------------------------------------
-hashlittle() -- hash a variable-length key into a 32-bit value
- k : the key (the unaligned variable-length array of bytes)
- length : the length of the key, counting by bytes
- initval : can be any 4-byte value
-Returns a 32-bit value. Every bit of the key affects every bit of
-the return value. Two keys differing by one or two bits will have
-totally different hash values.
-
-The best hash table sizes are powers of 2. There is no need to do
-mod a prime (mod is sooo slow!). If you need less than 32 bits,
-use a bitmask. For example, if you need only 10 bits, do
- h = (h & hashmask(10));
-In which case, the hash table should have hashsize(10) elements.
-
-If you are hashing n strings (uint8_t **)k, do it like this:
- for (i=0, h=0; i<n; ++i) h = hashlittle( k[i], len[i], h);
-
-By Bob Jenkins, 2006. bob_jenkins@burtleburtle.net. You may use this
-code any way you wish, private, educational, or commercial. It's free.
-
-Use for hash table lookup, or anything where one collision in 2^^32 is
-acceptable. Do NOT use for cryptographic purposes.
--------------------------------------------------------------------------------
-*/
-
-static uint32_t hashlittle( const void *key, size_t length, uint32_t initval)
-{
- uint32_t a,b,c; /* internal state */
- union { const void *ptr; size_t i; } u; /* needed for Mac Powerbook G4 */
-
- /* Set up the internal state */
- a = b = c = 0xdeadbeef + ((uint32_t)length) + initval;
-
- u.ptr = key;
- if (HASH_LITTLE_ENDIAN && ((u.i & 0x3) == 0)) {
- const uint32_t *k = (const uint32_t *)key; /* read 32-bit chunks */
-
- /*------ all but last block: aligned reads and affect 32 bits of (a,b,c) */
- while (length > 12)
- {
- a += k[0];
- b += k[1];
- c += k[2];
- mix(a,b,c);
- length -= 12;
- k += 3;
- }
-
- /*----------------------------- handle the last (probably partial) block */
- /*
- * "k[2]&0xffffff" actually reads beyond the end of the string, but
- * then masks off the part it's not allowed to read. Because the
- * string is aligned, the masked-off tail is in the same word as the
- * rest of the string. Every machine with memory protection I've seen
- * does it on word boundaries, so is OK with this. But VALGRIND will
- * still catch it and complain. The masking trick does make the hash
- * noticably faster for short strings (like English words).
- */
-#ifndef VALGRIND
-
- switch(length)
- {
- case 12: c+=k[2]; b+=k[1]; a+=k[0]; break;
- case 11: c+=k[2]&0xffffff; b+=k[1]; a+=k[0]; break;
- case 10: c+=k[2]&0xffff; b+=k[1]; a+=k[0]; break;
- case 9 : c+=k[2]&0xff; b+=k[1]; a+=k[0]; break;
- case 8 : b+=k[1]; a+=k[0]; break;
- case 7 : b+=k[1]&0xffffff; a+=k[0]; break;
- case 6 : b+=k[1]&0xffff; a+=k[0]; break;
- case 5 : b+=k[1]&0xff; a+=k[0]; break;
- case 4 : a+=k[0]; break;
- case 3 : a+=k[0]&0xffffff; break;
- case 2 : a+=k[0]&0xffff; break;
- case 1 : a+=k[0]&0xff; break;
- case 0 : return c; /* zero length strings require no mixing */
- }
-
-#else /* make valgrind happy */
-
- const uint8_t *k8 = (const uint8_t *)k;
- switch(length)
- {
- case 12: c+=k[2]; b+=k[1]; a+=k[0]; break;
- case 11: c+=((uint32_t)k8[10])<<16; /* fall through */
- case 10: c+=((uint32_t)k8[9])<<8; /* fall through */
- case 9 : c+=k8[8]; /* fall through */
- case 8 : b+=k[1]; a+=k[0]; break;
- case 7 : b+=((uint32_t)k8[6])<<16; /* fall through */
- case 6 : b+=((uint32_t)k8[5])<<8; /* fall through */
- case 5 : b+=k8[4]; /* fall through */
- case 4 : a+=k[0]; break;
- case 3 : a+=((uint32_t)k8[2])<<16; /* fall through */
- case 2 : a+=((uint32_t)k8[1])<<8; /* fall through */
- case 1 : a+=k8[0]; break;
- case 0 : return c;
- }
-
-#endif /* !valgrind */
-
- } else if (HASH_LITTLE_ENDIAN && ((u.i & 0x1) == 0)) {
- const uint16_t *k = (const uint16_t *)key; /* read 16-bit chunks */
- const uint8_t *k8;
-
- /*--------------- all but last block: aligned reads and different mixing */
- while (length > 12)
- {
- a += k[0] + (((uint32_t)k[1])<<16);
- b += k[2] + (((uint32_t)k[3])<<16);
- c += k[4] + (((uint32_t)k[5])<<16);
- mix(a,b,c);
- length -= 12;
- k += 6;
- }
-
- /*----------------------------- handle the last (probably partial) block */
- k8 = (const uint8_t *)k;
- switch(length)
- {
- case 12: c+=k[4]+(((uint32_t)k[5])<<16);
- b+=k[2]+(((uint32_t)k[3])<<16);
- a+=k[0]+(((uint32_t)k[1])<<16);
- break;
- case 11: c+=((uint32_t)k8[10])<<16; /* fall through */
- case 10: c+=k[4];
- b+=k[2]+(((uint32_t)k[3])<<16);
- a+=k[0]+(((uint32_t)k[1])<<16);
- break;
- case 9 : c+=k8[8]; /* fall through */
- case 8 : b+=k[2]+(((uint32_t)k[3])<<16);
- a+=k[0]+(((uint32_t)k[1])<<16);
- break;
- case 7 : b+=((uint32_t)k8[6])<<16; /* fall through */
- case 6 : b+=k[2];
- a+=k[0]+(((uint32_t)k[1])<<16);
- break;
- case 5 : b+=k8[4]; /* fall through */
- case 4 : a+=k[0]+(((uint32_t)k[1])<<16);
- break;
- case 3 : a+=((uint32_t)k8[2])<<16; /* fall through */
- case 2 : a+=k[0];
- break;
- case 1 : a+=k8[0];
- break;
- case 0 : return c; /* zero length requires no mixing */
- }
-
- } else { /* need to read the key one byte at a time */
- const uint8_t *k = (const uint8_t *)key;
-
- /*--------------- all but the last block: affect some 32 bits of (a,b,c) */
- while (length > 12)
- {
- a += k[0];
- a += ((uint32_t)k[1])<<8;
- a += ((uint32_t)k[2])<<16;
- a += ((uint32_t)k[3])<<24;
- b += k[4];
- b += ((uint32_t)k[5])<<8;
- b += ((uint32_t)k[6])<<16;
- b += ((uint32_t)k[7])<<24;
- c += k[8];
- c += ((uint32_t)k[9])<<8;
- c += ((uint32_t)k[10])<<16;
- c += ((uint32_t)k[11])<<24;
- mix(a,b,c);
- length -= 12;
- k += 12;
- }
-
- /*-------------------------------- last block: affect all 32 bits of (c) */
- switch(length) /* all the case statements fall through */
- {
- case 12: c+=((uint32_t)k[11])<<24;
- case 11: c+=((uint32_t)k[10])<<16;
- case 10: c+=((uint32_t)k[9])<<8;
- case 9 : c+=k[8];
- case 8 : b+=((uint32_t)k[7])<<24;
- case 7 : b+=((uint32_t)k[6])<<16;
- case 6 : b+=((uint32_t)k[5])<<8;
- case 5 : b+=k[4];
- case 4 : a+=((uint32_t)k[3])<<24;
- case 3 : a+=((uint32_t)k[2])<<16;
- case 2 : a+=((uint32_t)k[1])<<8;
- case 1 : a+=k[0];
- break;
- case 0 : return c;
- }
- }
-
- final(a,b,c);
- return c;
-}
-
-unsigned long lh_char_hash(const void *k)
-{
- static volatile int random_seed = -1;
-
- if (random_seed == -1) {
- int seed;
- /* we can't use -1 as it is the unitialized sentinel */
- while ((seed = json_c_get_random_seed()) == -1);
-#if defined __GNUC__
- __sync_val_compare_and_swap(&random_seed, -1, seed);
-#elif defined _MSC_VER
- InterlockedCompareExchange(&random_seed, seed, -1);
-#else
-#warning "racy random seed initializtion if used by multiple threads"
- random_seed = seed; /* potentially racy */
-#endif
- }
-
- return hashlittle((const char*)k, strlen((const char*)k), random_seed);
-}
-
-int lh_char_equal(const void *k1, const void *k2)
-{
- return (strcmp((const char*)k1, (const char*)k2) == 0);
-}
-
-struct lh_table* lh_table_new(int size, const char *name,
- lh_entry_free_fn *free_fn,
- lh_hash_fn *hash_fn,
- lh_equal_fn *equal_fn)
-{
- int i;
- struct lh_table *t;
-
- t = (struct lh_table*)calloc(1, sizeof(struct lh_table));
- if(!t) lh_abort("lh_table_new: calloc failed\n");
- t->count = 0;
- t->size = size;
- t->name = name;
- t->table = (struct lh_entry*)calloc(size, sizeof(struct lh_entry));
- if(!t->table) lh_abort("lh_table_new: calloc failed\n");
- t->free_fn = free_fn;
- t->hash_fn = hash_fn;
- t->equal_fn = equal_fn;
- for(i = 0; i < size; i++) t->table[i].k = LH_EMPTY;
- return t;
-}
-
-struct lh_table* lh_kchar_table_new(int size, const char *name,
- lh_entry_free_fn *free_fn)
-{
- return lh_table_new(size, name, free_fn, lh_char_hash, lh_char_equal);
-}
-
-struct lh_table* lh_kptr_table_new(int size, const char *name,
- lh_entry_free_fn *free_fn)
-{
- return lh_table_new(size, name, free_fn, lh_ptr_hash, lh_ptr_equal);
-}
-
-void lh_table_resize(struct lh_table *t, int new_size)
-{
- struct lh_table *new_t;
- struct lh_entry *ent;
-
- new_t = lh_table_new(new_size, t->name, NULL, t->hash_fn, t->equal_fn);
- ent = t->head;
- while(ent) {
- lh_table_insert(new_t, ent->k, ent->v);
- ent = ent->next;
- }
- free(t->table);
- t->table = new_t->table;
- t->size = new_size;
- t->head = new_t->head;
- t->tail = new_t->tail;
- t->resizes++;
- free(new_t);
-}
-
-void lh_table_free(struct lh_table *t)
-{
- struct lh_entry *c;
- for(c = t->head; c != NULL; c = c->next) {
- if(t->free_fn) {
- t->free_fn(c);
- }
- }
- free(t->table);
- free(t);
-}
-
-
-int lh_table_insert(struct lh_table *t, void *k, const void *v)
-{
- unsigned long h, n;
-
- t->inserts++;
- if(t->count >= t->size * LH_LOAD_FACTOR) lh_table_resize(t, t->size * 2);
-
- h = t->hash_fn(k);
- n = h % t->size;
-
- while( 1 ) {
- if(t->table[n].k == LH_EMPTY || t->table[n].k == LH_FREED) break;
- t->collisions++;
- if ((int)++n == t->size) n = 0;
- }
-
- t->table[n].k = k;
- t->table[n].v = v;
- t->count++;
-
- if(t->head == NULL) {
- t->head = t->tail = &t->table[n];
- t->table[n].next = t->table[n].prev = NULL;
- } else {
- t->tail->next = &t->table[n];
- t->table[n].prev = t->tail;
- t->table[n].next = NULL;
- t->tail = &t->table[n];
- }
-
- return 0;
-}
-
-
-struct lh_entry* lh_table_lookup_entry(struct lh_table *t, const void *k)
-{
- unsigned long h = t->hash_fn(k);
- unsigned long n = h % t->size;
- int count = 0;
-
- t->lookups++;
- while( count < t->size ) {
- if(t->table[n].k == LH_EMPTY) return NULL;
- if(t->table[n].k != LH_FREED &&
- t->equal_fn(t->table[n].k, k)) return &t->table[n];
- if ((int)++n == t->size) n = 0;
- count++;
- }
- return NULL;
-}
-
-
-const void* lh_table_lookup(struct lh_table *t, const void *k)
-{
- void *result;
- lh_table_lookup_ex(t, k, &result);
- return result;
-}
-
-json_bool lh_table_lookup_ex(struct lh_table* t, const void* k, void **v)
-{
- struct lh_entry *e = lh_table_lookup_entry(t, k);
- if (e != NULL) {
- if (v != NULL) *v = (void *)e->v;
- return TRUE; /* key found */
- }
- if (v != NULL) *v = NULL;
- return FALSE; /* key not found */
-}
-
-int lh_table_delete_entry(struct lh_table *t, struct lh_entry *e)
-{
- ptrdiff_t n = (ptrdiff_t)(e - t->table); /* CAW: fixed to be 64bit nice, still need the crazy negative case... */
-
- /* CAW: this is bad, really bad, maybe stack goes other direction on this machine... */
- if(n < 0) { return -2; }
-
- if(t->table[n].k == LH_EMPTY || t->table[n].k == LH_FREED) return -1;
- t->count--;
- if(t->free_fn) t->free_fn(e);
- t->table[n].v = NULL;
- t->table[n].k = LH_FREED;
- if(t->tail == &t->table[n] && t->head == &t->table[n]) {
- t->head = t->tail = NULL;
- } else if (t->head == &t->table[n]) {
- t->head->next->prev = NULL;
- t->head = t->head->next;
- } else if (t->tail == &t->table[n]) {
- t->tail->prev->next = NULL;
- t->tail = t->tail->prev;
- } else {
- t->table[n].prev->next = t->table[n].next;
- t->table[n].next->prev = t->table[n].prev;
- }
- t->table[n].next = t->table[n].prev = NULL;
- return 0;
-}
-
-
-int lh_table_delete(struct lh_table *t, const void *k)
-{
- struct lh_entry *e = lh_table_lookup_entry(t, k);
- if(!e) return -1;
- return lh_table_delete_entry(t, e);
-}
-
-int lh_table_length(struct lh_table *t)
-{
- return t->count;
-}
diff --git a/json-c/linkhash.h b/json-c/linkhash.h
deleted file mode 100644
index 950d09f..0000000
--- a/json-c/linkhash.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * $Id: linkhash.h,v 1.6 2006/01/30 23:07:57 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- * Copyright (c) 2009 Hewlett-Packard Development Company, L.P.
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef _linkhash_h_
-#define _linkhash_h_
-
-#include "json_object.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * golden prime used in hash functions
- */
-#define LH_PRIME 0x9e370001UL
-
-/**
- * The fraction of filled hash buckets until an insert will cause the table
- * to be resized.
- * This can range from just above 0 up to 1.0.
- */
-#define LH_LOAD_FACTOR 0.66
-
-/**
- * sentinel pointer value for empty slots
- */
-#define LH_EMPTY (void*)-1
-
-/**
- * sentinel pointer value for freed slots
- */
-#define LH_FREED (void*)-2
-
-struct lh_entry;
-
-/**
- * callback function prototypes
- */
-typedef void (lh_entry_free_fn) (struct lh_entry *e);
-/**
- * callback function prototypes
- */
-typedef unsigned long (lh_hash_fn) (const void *k);
-/**
- * callback function prototypes
- */
-typedef int (lh_equal_fn) (const void *k1, const void *k2);
-
-/**
- * An entry in the hash table
- */
-struct lh_entry {
- /**
- * The key.
- */
- void *k;
- /**
- * The value.
- */
- const void *v;
- /**
- * The next entry
- */
- struct lh_entry *next;
- /**
- * The previous entry.
- */
- struct lh_entry *prev;
-};
-
-
-/**
- * The hash table structure.
- */
-struct lh_table {
- /**
- * Size of our hash.
- */
- int size;
- /**
- * Numbers of entries.
- */
- int count;
-
- /**
- * Number of collisions.
- */
- int collisions;
-
- /**
- * Number of resizes.
- */
- int resizes;
-
- /**
- * Number of lookups.
- */
- int lookups;
-
- /**
- * Number of inserts.
- */
- int inserts;
-
- /**
- * Number of deletes.
- */
- int deletes;
-
- /**
- * Name of the hash table.
- */
- const char *name;
-
- /**
- * The first entry.
- */
- struct lh_entry *head;
-
- /**
- * The last entry.
- */
- struct lh_entry *tail;
-
- struct lh_entry *table;
-
- /**
- * A pointer onto the function responsible for freeing an entry.
- */
- lh_entry_free_fn *free_fn;
- lh_hash_fn *hash_fn;
- lh_equal_fn *equal_fn;
-};
-
-
-/**
- * Pre-defined hash and equality functions
- */
-extern unsigned long lh_ptr_hash(const void *k);
-extern int lh_ptr_equal(const void *k1, const void *k2);
-
-extern unsigned long lh_char_hash(const void *k);
-extern int lh_char_equal(const void *k1, const void *k2);
-
-
-/**
- * Convenience list iterator.
- */
-#define lh_foreach(table, entry) \
-for(entry = table->head; entry; entry = entry->next)
-
-/**
- * lh_foreach_safe allows calling of deletion routine while iterating.
- */
-#define lh_foreach_safe(table, entry, tmp) \
-for(entry = table->head; entry && ((tmp = entry->next) || 1); entry = tmp)
-
-
-
-/**
- * Create a new linkhash table.
- * @param size initial table size. The table is automatically resized
- * although this incurs a performance penalty.
- * @param name the table name.
- * @param free_fn callback function used to free memory for entries
- * when lh_table_free or lh_table_delete is called.
- * If NULL is provided, then memory for keys and values
- * must be freed by the caller.
- * @param hash_fn function used to hash keys. 2 standard ones are defined:
- * lh_ptr_hash and lh_char_hash for hashing pointer values
- * and C strings respectively.
- * @param equal_fn comparison function to compare keys. 2 standard ones defined:
- * lh_ptr_hash and lh_char_hash for comparing pointer values
- * and C strings respectively.
- * @return a pointer onto the linkhash table.
- */
-extern struct lh_table* lh_table_new(int size, const char *name,
- lh_entry_free_fn *free_fn,
- lh_hash_fn *hash_fn,
- lh_equal_fn *equal_fn);
-
-/**
- * Convenience function to create a new linkhash
- * table with char keys.
- * @param size initial table size.
- * @param name table name.
- * @param free_fn callback function used to free memory for entries.
- * @return a pointer onto the linkhash table.
- */
-extern struct lh_table* lh_kchar_table_new(int size, const char *name,
- lh_entry_free_fn *free_fn);
-
-
-/**
- * Convenience function to create a new linkhash
- * table with ptr keys.
- * @param size initial table size.
- * @param name table name.
- * @param free_fn callback function used to free memory for entries.
- * @return a pointer onto the linkhash table.
- */
-extern struct lh_table* lh_kptr_table_new(int size, const char *name,
- lh_entry_free_fn *free_fn);
-
-
-/**
- * Free a linkhash table.
- * If a callback free function is provided then it is called for all
- * entries in the table.
- * @param t table to free.
- */
-extern void lh_table_free(struct lh_table *t);
-
-
-/**
- * Insert a record into the table.
- * @param t the table to insert into.
- * @param k a pointer to the key to insert.
- * @param v a pointer to the value to insert.
- */
-extern int lh_table_insert(struct lh_table *t, void *k, const void *v);
-
-
-/**
- * Lookup a record into the table.
- * @param t the table to lookup
- * @param k a pointer to the key to lookup
- * @return a pointer to the record structure of the value or NULL if it does not exist.
- */
-extern struct lh_entry* lh_table_lookup_entry(struct lh_table *t, const void *k);
-
-/**
- * Lookup a record into the table
- * @param t the table to lookup
- * @param k a pointer to the key to lookup
- * @return a pointer to the found value or NULL if it does not exist.
- * @deprecated Use lh_table_lookup_ex instead.
- */
-THIS_FUNCTION_IS_DEPRECATED(extern const void* lh_table_lookup(struct lh_table *t, const void *k));
-
-/**
- * Lookup a record in the table
- * @param t the table to lookup
- * @param k a pointer to the key to lookup
- * @param v a pointer to a where to store the found value (set to NULL if it doesn't exist).
- * @return whether or not the key was found
- */
-extern json_bool lh_table_lookup_ex(struct lh_table *t, const void *k, void **v);
-
-/**
- * Delete a record from the table.
- * If a callback free function is provided then it is called for the
- * for the item being deleted.
- * @param t the table to delete from.
- * @param e a pointer to the entry to delete.
- * @return 0 if the item was deleted.
- * @return -1 if it was not found.
- */
-extern int lh_table_delete_entry(struct lh_table *t, struct lh_entry *e);
-
-
-/**
- * Delete a record from the table.
- * If a callback free function is provided then it is called for the
- * for the item being deleted.
- * @param t the table to delete from.
- * @param k a pointer to the key to delete.
- * @return 0 if the item was deleted.
- * @return -1 if it was not found.
- */
-extern int lh_table_delete(struct lh_table *t, const void *k);
-
-extern int lh_table_length(struct lh_table *t);
-
-void lh_abort(const char *msg, ...);
-void lh_table_resize(struct lh_table *t, int new_size);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/math_compat.h b/json-c/math_compat.h
deleted file mode 100644
index f40b8fa..0000000
--- a/json-c/math_compat.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __math_compat_h
-#define __math_compat_h
-
-/* Define isnan and isinf on Windows/MSVC */
-
-#ifndef HAVE_DECL_ISNAN
-# ifdef HAVE_DECL__ISNAN
-#include <float.h>
-#define isnan(x) _isnan(x)
-# endif
-#endif
-
-#ifndef HAVE_DECL_ISINF
-# ifdef HAVE_DECL__FINITE
-#include <float.h>
-#define isinf(x) (!_finite(x))
-# endif
-#endif
-
-#ifndef HAVE_DECL_NAN
-#error This platform does not have nan()
-#endif
-
-#ifndef HAVE_DECL_INFINITY
-#error This platform does not have INFINITY
-#endif
-
-#endif
diff --git a/json-c/printbuf.c b/json-c/printbuf.c
deleted file mode 100644
index fe952b4..0000000
--- a/json-c/printbuf.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * $Id: printbuf.c,v 1.5 2006/01/26 02:16:28 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- *
- * Copyright (c) 2008-2009 Yahoo! Inc. All rights reserved.
- * The copyrights to the contents of this file are licensed under the MIT License
- * (http://www.opensource.org/licenses/mit-license.php)
- */
-
-#include "config.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifdef HAVE_STDARG_H
-# include <stdarg.h>
-#else /* !HAVE_STDARG_H */
-# error Not enough var arg support!
-#endif /* HAVE_STDARG_H */
-
-#include "debug.h"
-#include "printbuf.h"
-
-static int printbuf_extend(struct printbuf *p, int min_size);
-
-struct printbuf* printbuf_new(void)
-{
- struct printbuf *p;
-
- p = (struct printbuf*)calloc(1, sizeof(struct printbuf));
- if(!p) return NULL;
- p->size = 32;
- p->bpos = 0;
- if(!(p->buf = (char*)malloc(p->size))) {
- free(p);
- return NULL;
- }
- return p;
-}
-
-
-/**
- * Extend the buffer p so it has a size of at least min_size.
- *
- * If the current size is large enough, nothing is changed.
- *
- * Note: this does not check the available space! The caller
- * is responsible for performing those calculations.
- */
-static int printbuf_extend(struct printbuf *p, int min_size)
-{
- char *t;
- int new_size;
-
- if (p->size >= min_size)
- return 0;
-
- new_size = p->size * 2;
- if (new_size < min_size + 8)
- new_size = min_size + 8;
-#ifdef PRINTBUF_DEBUG
- MC_DEBUG("printbuf_memappend: realloc "
- "bpos=%d min_size=%d old_size=%d new_size=%d\n",
- p->bpos, min_size, p->size, new_size);
-#endif /* PRINTBUF_DEBUG */
- if(!(t = (char*)realloc(p->buf, new_size)))
- return -1;
- p->size = new_size;
- p->buf = t;
- return 0;
-}
-
-int printbuf_memappend(struct printbuf *p, const char *buf, int size)
-{
- if (p->size <= p->bpos + size + 1) {
- if (printbuf_extend(p, p->bpos + size + 1) < 0)
- return -1;
- }
- memcpy(p->buf + p->bpos, buf, size);
- p->bpos += size;
- p->buf[p->bpos]= '\0';
- return size;
-}
-
-int printbuf_memset(struct printbuf *pb, int offset, int charvalue, int len)
-{
- int size_needed;
-
- if (offset == -1)
- offset = pb->bpos;
- size_needed = offset + len;
- if (pb->size < size_needed)
- {
- if (printbuf_extend(pb, size_needed) < 0)
- return -1;
- }
-
- memset(pb->buf + offset, charvalue, len);
- if (pb->bpos < size_needed)
- pb->bpos = size_needed;
-
- return 0;
-}
-
-#if !defined(HAVE_VSNPRINTF) && defined(_MSC_VER)
-# define vsnprintf _vsnprintf
-#elif !defined(HAVE_VSNPRINTF) /* !HAVE_VSNPRINTF */
-# error Need vsnprintf!
-#endif /* !HAVE_VSNPRINTF && defined(WIN32) */
-
-#if !defined(HAVE_VASPRINTF)
-/* CAW: compliant version of vasprintf */
-static int vasprintf(char **buf, const char *fmt, va_list ap)
-{
-#ifndef WIN32
- static char _T_emptybuffer = '\0';
-#endif /* !defined(WIN32) */
- int chars;
- char *b;
-
- if(!buf) { return -1; }
-
-#ifdef WIN32
- chars = _vscprintf(fmt, ap)+1;
-#else /* !defined(WIN32) */
- /* CAW: RAWR! We have to hope to god here that vsnprintf doesn't overwrite
- our buffer like on some 64bit sun systems.... but hey, its time to move on */
- chars = vsnprintf(&_T_emptybuffer, 0, fmt, ap)+1;
- if(chars < 0) { chars *= -1; } /* CAW: old glibc versions have this problem */
-#endif /* defined(WIN32) */
-
- b = (char*)malloc(sizeof(char)*chars);
- if(!b) { return -1; }
-
- if((chars = vsprintf(b, fmt, ap)) < 0)
- {
- free(b);
- } else {
- *buf = b;
- }
-
- return chars;
-}
-#endif /* !HAVE_VASPRINTF */
-
-int sprintbuf(struct printbuf *p, const char *msg, ...)
-{
- va_list ap;
- char *t;
- int size;
- char buf[128];
-
- /* user stack buffer first */
- va_start(ap, msg);
- size = vsnprintf(buf, 128, msg, ap);
- va_end(ap);
- /* if string is greater than stack buffer, then use dynamic string
- with vasprintf. Note: some implementation of vsnprintf return -1
- if output is truncated whereas some return the number of bytes that
- would have been written - this code handles both cases. */
- if(size == -1 || size > 127) {
- va_start(ap, msg);
- if((size = vasprintf(&t, msg, ap)) < 0) { va_end(ap); return -1; }
- va_end(ap);
- printbuf_memappend(p, t, size);
- free(t);
- return size;
- } else {
- printbuf_memappend(p, buf, size);
- return size;
- }
-}
-
-void printbuf_reset(struct printbuf *p)
-{
- p->buf[0] = '\0';
- p->bpos = 0;
-}
-
-void printbuf_free(struct printbuf *p)
-{
- if(p) {
- free(p->buf);
- free(p);
- }
-}
diff --git a/json-c/printbuf.h b/json-c/printbuf.h
deleted file mode 100644
index b1bde7f..0000000
--- a/json-c/printbuf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * $Id: printbuf.h,v 1.4 2006/01/26 02:16:28 mclark Exp $
- *
- * Copyright (c) 2004, 2005 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- *
- * Copyright (c) 2008-2009 Yahoo! Inc. All rights reserved.
- * The copyrights to the contents of this file are licensed under the MIT License
- * (http://www.opensource.org/licenses/mit-license.php)
- */
-
-#ifndef _printbuf_h_
-#define _printbuf_h_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct printbuf {
- char *buf;
- int bpos;
- int size;
-};
-
-extern struct printbuf*
-printbuf_new(void);
-
-/* As an optimization, printbuf_memappend_fast is defined as a macro
- * that handles copying data if the buffer is large enough; otherwise
- * it invokes printbuf_memappend_real() which performs the heavy
- * lifting of realloc()ing the buffer and copying data.
- * Your code should not use printbuf_memappend directly--use
- * printbuf_memappend_fast instead.
- */
-extern int
-printbuf_memappend(struct printbuf *p, const char *buf, int size);
-
-#define printbuf_memappend_fast(p, bufptr, bufsize) \
-do { \
- if ((p->size - p->bpos) > bufsize) { \
- memcpy(p->buf + p->bpos, (bufptr), bufsize); \
- p->bpos += bufsize; \
- p->buf[p->bpos]= '\0'; \
- } else { printbuf_memappend(p, (bufptr), bufsize); } \
-} while (0)
-
-#define printbuf_length(p) ((p)->bpos)
-
-/**
- * Set len bytes of the buffer to charvalue, starting at offset offset.
- * Similar to calling memset(x, charvalue, len);
- *
- * The memory allocated for the buffer is extended as necessary.
- *
- * If offset is -1, this starts at the end of the current data in the buffer.
- */
-extern int
-printbuf_memset(struct printbuf *pb, int offset, int charvalue, int len);
-
-extern int
-sprintbuf(struct printbuf *p, const char *msg, ...);
-
-extern void
-printbuf_reset(struct printbuf *p);
-
-extern void
-printbuf_free(struct printbuf *p);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/json-c/random_seed.c b/json-c/random_seed.c
deleted file mode 100644
index f671929..0000000
--- a/json-c/random_seed.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * random_seed.c
- *
- * Copyright (c) 2013 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#include <stdio.h>
-#include "config.h"
-
-#define DEBUG_SEED(s)
-
-
-#if defined ENABLE_RDRAND
-
-/* cpuid */
-
-#if defined __GNUC__ && (defined __i386__ || defined __x86_64__)
-#define HAS_X86_CPUID 1
-
-static void do_cpuid(int regs[], int h)
-{
- __asm__ __volatile__(
-#if defined __x86_64__
- "pushq %%rbx;\n"
-#else
- "pushl %%ebx;\n"
-#endif
- "cpuid;\n"
-#if defined __x86_64__
- "popq %%rbx;\n"
-#else
- "popl %%ebx;\n"
-#endif
- : "=a"(regs[0]), [ebx] "=r"(regs[1]), "=c"(regs[2]), "=d"(regs[3])
- : "a"(h));
-}
-
-#elif defined _MSC_VER
-
-#define HAS_X86_CPUID 1
-#define do_cpuid __cpuid
-
-#endif
-
-/* has_rdrand */
-
-#if HAS_X86_CPUID
-
-static int has_rdrand()
-{
- // CPUID.01H:ECX.RDRAND[bit 30] == 1
- int regs[4];
- do_cpuid(regs, 1);
- return (regs[2] & (1 << 30)) != 0;
-}
-
-#endif
-
-/* get_rdrand_seed - GCC x86 and X64 */
-
-#if defined __GNUC__ && (defined __i386__ || defined __x86_64__)
-
-#define HAVE_RDRAND 1
-
-static int get_rdrand_seed()
-{
- DEBUG_SEED("get_rdrand_seed");
- int _eax;
- // rdrand eax
- __asm__ __volatile__("1: .byte 0x0F\n"
- " .byte 0xC7\n"
- " .byte 0xF0\n"
- " jnc 1b;\n"
- : "=a" (_eax));
- return _eax;
-}
-
-#endif
-
-#if defined _MSC_VER
-
-#if _MSC_VER >= 1700
-#define HAVE_RDRAND 1
-
-/* get_rdrand_seed - Visual Studio 2012 and above */
-
-static int get_rdrand_seed()
-{
- DEBUG_SEED("get_rdrand_seed");
- int r;
- while (_rdrand32_step(&r) == 0);
- return r;
-}
-
-#elif defined _M_IX86
-#define HAVE_RDRAND 1
-
-/* get_rdrand_seed - Visual Studio 2010 and below - x86 only */
-
-static int get_rdrand_seed()
-{
- DEBUG_SEED("get_rdrand_seed");
- int _eax;
-retry:
- // rdrand eax
- __asm _emit 0x0F __asm _emit 0xC7 __asm _emit 0xF0
- __asm jnc retry
- __asm mov _eax, eax
- return _eax;
-}
-
-#endif
-#endif
-
-#endif /* defined ENABLE_RDRAND */
-
-
-/* has_dev_urandom */
-
-#if defined (__APPLE__) || defined(__unix__) || defined(__linux__)
-
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <sys/stat.h>
-
-#define HAVE_DEV_RANDOM 1
-
-static const char *dev_random_file = "/dev/urandom";
-
-static int has_dev_urandom()
-{
- struct stat buf;
- if (stat(dev_random_file, &buf)) {
- return 0;
- }
- return ((buf.st_mode & S_IFCHR) != 0);
-}
-
-
-/* get_dev_random_seed */
-
-static int get_dev_random_seed()
-{
- DEBUG_SEED("get_dev_random_seed");
-
- int fd = open(dev_random_file, O_RDONLY);
- if (fd < 0) {
- fprintf(stderr, "error opening %s: %s", dev_random_file, strerror(errno));
- exit(1);
- }
-
- int r;
- ssize_t nread = read(fd, &r, sizeof(r));
- if (nread != sizeof(r)) {
- fprintf(stderr, "error short read %s: %s", dev_random_file, strerror(errno));
- exit(1);
- }
-
- close(fd);
- return r;
-}
-
-#endif
-
-
-/* get_cryptgenrandom_seed */
-
-#ifdef WIN32
-
-#define HAVE_CRYPTGENRANDOM 1
-
-#include <windows.h>
-#include <wincrypt.h>
-#ifndef __GNUC__
-#pragma comment(lib, "advapi32.lib")
-#endif
-
-static int get_cryptgenrandom_seed()
-{
- DEBUG_SEED("get_cryptgenrandom_seed");
-
- HCRYPTPROV hProvider = 0;
- int r;
-
- if (!CryptAcquireContextW(&hProvider, 0, 0, PROV_RSA_FULL, CRYPT_VERIFYCONTEXT | CRYPT_SILENT)) {
- fprintf(stderr, "error CryptAcquireContextW");
- exit(1);
- }
-
- if (!CryptGenRandom(hProvider, sizeof(r), (BYTE*)&r)) {
- fprintf(stderr, "error CryptGenRandom");
- exit(1);
- }
-
- CryptReleaseContext(hProvider, 0);
-
- return r;
-}
-
-#endif
-
-
-/* get_time_seed */
-
-#include <time.h>
-
-static int get_time_seed()
-{
- DEBUG_SEED("get_time_seed");
-
- return (int)time(NULL) * 433494437;
-}
-
-
-/* json_c_get_random_seed */
-
-int json_c_get_random_seed()
-{
-#if HAVE_RDRAND
- if (has_rdrand()) return get_rdrand_seed();
-#endif
-#if HAVE_DEV_RANDOM
- if (has_dev_urandom()) return get_dev_random_seed();
-#endif
-#if HAVE_CRYPTGENRANDOM
- return get_cryptgenrandom_seed();
-#endif
- return get_time_seed();
-}
diff --git a/json-c/random_seed.h b/json-c/random_seed.h
deleted file mode 100644
index 7362d67..0000000
--- a/json-c/random_seed.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * random_seed.h
- *
- * Copyright (c) 2013 Metaparadigm Pte. Ltd.
- * Michael Clark <michael@metaparadigm.com>
- *
- * This library is free software; you can redistribute it and/or modify
- * it under the terms of the MIT license. See COPYING for details.
- *
- */
-
-#ifndef seed_h
-#define seed_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern int json_c_get_random_seed();
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/keymaster/Android.bp b/keymaster/Android.bp
deleted file mode 100644
index 02d52a9..0000000
--- a/keymaster/Android.bp
+++ /dev/null
@@ -1,27 +0,0 @@
-//
-// Copyright (C) 2018 The Android Open Source Project
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-cc_binary {
- name: "wait_for_strongbox",
- relative_install_path: "hw",
- srcs: [ "wait_for_strongbox.cpp" ],
- cflags: [ "-Werror", "-Wall" ],
- shared_libs: [
- "android.hardware.keymaster@4.0",
- "libbase",
- "libkeymaster4support",
- ],
- proprietary: true,
-}
diff --git a/keymaster/wait_for_strongbox.cpp b/keymaster/wait_for_strongbox.cpp
deleted file mode 100644
index 8f95741..0000000
--- a/keymaster/wait_for_strongbox.cpp
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- ** Copyright 2018, The Android Open Source Project
- **
- ** Licensed under the Apache License, Version 2.0 (the "License");
- ** you may not use this file except in compliance with the License.
- ** You may obtain a copy of the License at
- **
- ** http://www.apache.org/licenses/LICENSE-2.0
- **
- ** Unless required by applicable law or agreed to in writing, software
- ** distributed under the License is distributed on an "AS IS" BASIS,
- ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- ** See the License for the specific language governing permissions and
- ** limitations under the License.
- */
-
-#include <unistd.h>
-
-#define LOG_TAG "wait_for_strongbox"
-#include <android-base/logging.h>
-
-#include <keymasterV4_0/Keymaster.h>
-
-using android::hardware::keymaster::V4_0::SecurityLevel;
-using android::hardware::keymaster::V4_0::support::Keymaster;
-
-useconds_t kWaitTimeMicroseconds = 1 * 1000; // 1 milliseconds
-
-int main() {
- for (unsigned cycleCount = 0; /* Forever */; ++cycleCount) {
- auto keymasters = Keymaster::enumerateAvailableDevices();
-
- bool foundStrongBox = false;
- bool foundTee = false;
- for (auto &dev : keymasters) {
- SecurityLevel securityLevel = dev->halVersion().securityLevel;
- uint8_t majorVersion = dev->halVersion().majorVersion;
- if (securityLevel == SecurityLevel::STRONGBOX && majorVersion == 4) {
- foundStrongBox = true;
- }
- if (securityLevel == SecurityLevel::TRUSTED_ENVIRONMENT && majorVersion == 4) {
- foundTee = true;
- }
- }
-
- if (foundTee && foundStrongBox) {
- return 0;
- }
- if (cycleCount % 10 == 1) {
- if (!foundStrongBox) {
- LOG(WARNING) << "Still waiting for StrongBox Keymaster";
- }
- if (!foundTee) {
- LOG(WARNING) << "Still waiting for TEE Keymaster";
- }
- }
- usleep(kWaitTimeMicroseconds);
- }
-}
diff --git a/manifest.xml b/manifest.xml
deleted file mode 100644
index dc53b48..0000000
--- a/manifest.xml
+++ /dev/null
@@ -1,596 +0,0 @@
-<!-- Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above
- copyright notice, this list of conditions and the following
- disclaimer in the documentation and/or other materials provided
- with the distribution.
- * Neither the name of The Linux Foundation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--->
-<manifest version="1.0" type="device" target-level="3">
- <hal format="hidl">
- <name>android.hardware.boot</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>1.0</version>
- <interface>
- <name>IBootControl</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.health</name>
- <transport>hwbinder</transport>
- <version>2.0</version>
- <interface>
- <name>IHealth</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.audio</name>
- <transport>hwbinder</transport>
- <version>5.0</version>
- <interface>
- <name>IDevicesFactory</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.audio.effect</name>
- <transport>hwbinder</transport>
- <version>5.0</version>
- <interface>
- <name>IEffectsFactory</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.usb</name>
- <transport>hwbinder</transport>
- <version>1.2</version>
- <interface>
- <name>IUsb</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.usb.gadget</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IUsbGadget</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.confirmationui</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IConfirmationUI</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.soundtrigger</name>
- <transport>hwbinder</transport>
- <version>2.2</version>
- <interface>
- <name>ISoundTriggerHw</name>
- <instance>default</instance>
- </interface>
- </hal>
- <!-- video omx hal -->
- <hal format="hidl">
- <name>android.hardware.media.omx</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>1.0</version>
- <interface>
- <name>IOmx</name>
- <instance>default</instance>
- </interface>
- <interface>
- <name>IOmxStore</name>
- <instance>default</instance>
- </interface>
- </hal>
- <!-- /video omx hal -->
- <!-- display -->
- <hal format="hidl">
- <name>android.hardware.renderscript</name>
- <transport arch="32+64">passthrough</transport>
- <version>1.0</version>
- <interface>
- <name>IDevice</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.graphics.allocator</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>2.0</version>
- <interface>
- <name>IAllocator</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.graphics.mapper</name>
- <transport arch="32+64">passthrough</transport>
- <impl level="generic"></impl>
- <version>2.1</version>
- <interface>
- <name>IMapper</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.graphics.composer</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>2.3</version>
- <interface>
- <name>IComposer</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.display.config</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>1.8</version>
- <interface>
- <name>IDisplayConfig</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.display.color</name>
- <transport>hwbinder</transport>
- <version>1.3</version>
- <interface>
- <name>IDisplayColor</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.google.radioext</name>
- <transport>hwbinder</transport>
- <version>1.1</version>
- <interface>
- <name>IRadioExt</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.configstore</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>1.1</version>
- <interface>
- <name>ISurfaceFlingerConfigs</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.memtrack</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>1.0</version>
- <interface>
- <name>IMemtrack</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.secure_element</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>ISecureElement</name>
- <instance>eSE1</instance>
- <instance>SIM1</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.sensors</name>
- <transport>hwbinder</transport>
- <version>2.0</version>
- <interface>
- <name>ISensors</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.camera.provider</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>2.4</version>
- <interface>
- <name>ICameraProvider</name>
- <instance>legacy/0</instance>
- </interface>
- </hal>
- <!-- gatekeeper -->
- <hal format="hidl">
- <name>android.hardware.gatekeeper</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IGatekeeper</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.gnss</name>
- <transport>hwbinder</transport>
- <fqname>@1.1::IGnss/default</fqname>
- <fqname>@2.0::IGnss/default</fqname>
- </hal>
- <!-- qcrilhook -->
- <hal format="hidl">
- <name>vendor.qti.hardware.radio.qcrilhook</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IQtiOemHook</name>
- <instance>oemhook0</instance>
- <instance>oemhook1</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.qti.hardware.radio.ims</name>
- <transport>hwbinder</transport>
- <version>1.4</version>
- <interface>
- <name>IImsRadio</name>
- <instance>imsradio0</instance>
- <instance>imsradio1</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.qti.hardware.radio.uim</name>
- <transport>hwbinder</transport>
- <version>1.1</version>
- <interface>
- <name>IUim</name>
- <instance>Uim0</instance>
- <instance>Uim1</instance>
- </interface>
- </hal>
- <!-- RIL UIM REMOTE CLIENT -->
- <hal format="hidl">
- <name>vendor.qti.hardware.radio.uim_remote_client</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IUimRemoteServiceClient</name>
- <instance>uimRemoteClient0</instance>
- <instance>uimRemoteClient1</instance>
- </interface>
- </hal>
- <!-- RIL UIM REMOTE SERVER -->
- <hal format="hidl">
- <name>vendor.qti.hardware.radio.uim_remote_server</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IUimRemoteServiceServer</name>
- <instance>uimRemoteServer0</instance>
- <instance>uimRemoteServer1</instance>
- </interface>
- </hal>
- <!-- IMS RTP Service -->
- <hal format="hidl">
- <name>vendor.qti.imsrtpservice</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>2.0</version>
- <interface>
- <name>IRTPService</name>
- <instance>imsrtpservice</instance>
- </interface>
- </hal>
- <!-- bluetooth -->
- <hal format="hidl">
- <name>android.hardware.bluetooth</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>1.0</version>
- <interface>
- <name>IBluetoothHci</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.bluetooth.a2dp</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IBluetoothAudioOffload</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.bluetooth.audio</name>
- <transport>hwbinder</transport>
- <version>2.0</version>
- <interface>
- <name>IBluetoothAudioProvidersFactory</name>
- <instance>default</instance>
- </interface>
- </hal>
- <!-- IMS UCE Service -->
- <hal format="hidl">
- <name>com.qualcomm.qti.uceservice</name>
- <transport>hwbinder</transport>
- <version>2.0</version>
- <interface>
- <name>IUceService</name>
- <instance>com.qualcomm.qti.uceservice</instance>
- </interface>
- </hal>
- <!-- IMS callinfo Service -->
- <hal format="hidl">
- <name>vendor.qti.ims.callinfo</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IService</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>com.qualcomm.qti.imscmservice</name>
- <transport>hwbinder</transport>
- <version>2.1</version>
- <interface>
- <name>IImsCmService</name>
- <instance>qti.ims.connectionmanagerservice</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.qti.hardware.radio.am</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IQcRilAudio</name>
- <instance>slot1</instance>
- <instance>slot2</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.wifi</name>
- <transport>hwbinder</transport>
- <version>1.3</version>
- <interface>
- <name>IWifi</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.wifi.supplicant</name>
- <transport>hwbinder</transport>
- <version>1.2</version>
- <interface>
- <name>ISupplicant</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.wifi.hostapd</name>
- <transport>hwbinder</transport>
- <version>1.1</version>
- <interface>
- <name>IHostapd</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.qti.data.factory</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IFactory</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>com.quicinc.cne.server</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>2.1</version>
- <interface>
- <name>IServer</name>
- <instance>cnd</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>com.quicinc.cne.api</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>1.1</version>
- <interface>
- <name>IApiService</name>
- <instance>cnd</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.drm</name>
- <transport>hwbinder</transport>
- <impl level="generic"></impl>
- <version>1.0</version>
- <interface>
- <name>ICryptoFactory</name>
- <instance>widevine</instance>
- <instance>default</instance>
- </interface>
- <interface>
- <name>IDrmFactory</name>
- <instance>widevine</instance>
- <instance>default</instance>
- </interface>
- <fqname>@1.2::ICryptoFactory/clearkey</fqname>
- <fqname>@1.2::IDrmFactory/clearkey</fqname>
- <fqname>@1.2::ICryptoFactory/widevine</fqname>
- <fqname>@1.2::IDrmFactory/widevine</fqname>
- </hal>
- <hal format="hidl">
- <name>android.hardware.radio</name>
- <transport>hwbinder</transport>
- <version>1.2</version>
- <interface>
- <name>IRadio</name>
- <instance>slot1</instance>
- <instance>slot2</instance>
- </interface>
- <interface>
- <name>ISap</name>
- <instance>slot1</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.radio.config</name>
- <transport>hwbinder</transport>
- <version>1.1</version>
- <interface>
- <name>IRadioConfig</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.nfc</name>
- <transport>hwbinder</transport>
- <version>1.2</version>
- <interface>
- <name>INfc</name>
- <instance>default</instance>
- </interface>
- </hal>
- <!-- Context Hub HAL Service -->
- <hal format="hidl">
- <name>android.hardware.contexthub</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IContexthub</name>
- <instance>default</instance>
- </interface>
- </hal>
- <!-- Neural Network HAL -->
- <hal format="hidl">
- <name>android.hardware.neuralnetworks</name>
- <transport>hwbinder</transport>
- <version>1.2</version>
- <interface>
- <name>IDevice</name>
- <instance>darwinn</instance>
- <instance>default</instance>
- </interface>
- </hal>
- <!-- keymaster -->
- <hal format="hidl">
- <name>android.hardware.keymaster</name>
- <transport>hwbinder</transport>
- <version>4.0</version>
- <interface>
- <name>IKeymasterDevice</name>
- <instance>default</instance>
- <instance>strongbox</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.power.stats</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IPowerStats</name>
- <instance>default</instance>
- </interface>
- </hal>
- <!-- light HAL -->
- <hal format="hidl">
- <name>android.hardware.light</name>
- <transport>hwbinder</transport>
- <version>2.0</version>
- <interface>
- <name>ILight</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>hardware.google.light</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>ILight</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.google.airbrush.manager</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IAirbrushManager</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.weaver</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IWeaver</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>android.hardware.dumpstate</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IDumpstateDevice</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.qti.hardware.bluetooth_sar</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>IBluetoothSar</name>
- <instance>default</instance>
- </interface>
- </hal>
- <hal format="hidl">
- <name>vendor.qti.hardware.tui_comm</name>
- <transport>hwbinder</transport>
- <version>1.0</version>
- <interface>
- <name>ITuiComm</name>
- <instance>default</instance>
- </interface>
- </hal>
-</manifest>
diff --git a/media_codecs.xml b/media_codecs.xml
deleted file mode 100644
index 5685092..0000000
--- a/media_codecs.xml
+++ /dev/null
@@ -1,422 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2012-2018 The Linux Foundation. All rights reserved.
- Not a contribution.
- Copyright (C) 2012-2013 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!--
-<!DOCTYPE MediaCodecs [
-<!ELEMENT Include EMPTY>
-<!ATTLIST Include href CDATA #REQUIRED>
-<!ELEMENT MediaCodecs (Decoders|Encoders|Include)*>
-<!ELEMENT Decoders (MediaCodec|Include)*>
-<!ELEMENT Encoders (MediaCodec|Include)*>
-<!ELEMENT MediaCodec (Type|Quirk|Include)*>
-<!ATTLIST MediaCodec name CDATA #REQUIRED>
-<!ATTLIST MediaCodec type CDATA>
-<!ELEMENT Type EMPTY>
-<!ATTLIST Type name CDATA #REQUIRED>
-<!ELEMENT Quirk EMPTY>
-<!ATTLIST Quirk name CDATA #REQUIRED>
-]>
-
-There's a simple and a complex syntax to declare the availability of a
-media codec:
-
-A codec that properly follows the OpenMax spec and therefore doesn't have any
-quirks and that only supports a single content type can be declared like so:
-
- <MediaCodec name="OMX.foo.bar" type="something/interesting" />
-
-If a codec has quirks OR supports multiple content types, the following syntax
-can be used:
-
- <MediaCodec name="OMX.foo.bar" >
- <Type name="something/interesting" />
- <Type name="something/else" />
- ...
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Quirk name="output-buffers-are-unreadable" />
- </MediaCodec>
-
-Only the three quirks included above are recognized at this point:
-
-"requires-allocate-on-input-ports"
- must be advertised if the component does not properly support specification
- of input buffers using the OMX_UseBuffer(...) API but instead requires
- OMX_AllocateBuffer to be used.
-
-"requires-allocate-on-output-ports"
- must be advertised if the component does not properly support specification
- of output buffers using the OMX_UseBuffer(...) API but instead requires
- OMX_AllocateBuffer to be used.
-
-"output-buffers-are-unreadable"
- must be advertised if the emitted output buffers of a decoder component
- are not readable, i.e. use a custom format even though abusing one of
- the official OMX colorspace constants.
- Clients of such decoders will not be able to access the decoded data,
- naturally making the component much less useful. The only use for
- a component with this quirk is to render the output to the screen.
- Audio decoders MUST NOT advertise this quirk.
- Video decoders that advertise this quirk must be accompanied by a
- corresponding color space converter for thumbnail extraction,
- matching surfaceflinger support that can render the custom format to
- a texture and possibly other code, so just DON'T USE THIS QUIRK.
-
-
--->
-
-<!--
- Non-Secure decoder capabilities
- (MB is defined as 16x16)
- _____________________________________________________________________
- | Codec | W H fps Mbps MB/s Max MB/s|
- |_____________|_____________________________________________________|
- | h264 | 1920 1088 480 220 3916800 3916800 |
- | | 3820 2160 120 220 3888000 |
- | | 4096 2160 96 220 3317760 |
- | | 4096 2304 60 220 2211840 |
- | | 7680 4320 30 220 3888000 |
- | | 8192 4320 24 220 3317760 |
- | hevc | 1920 1088 480 220 3916800 3916800 |
- | | 3820 2160 120 220 3888000 |
- | | 4096 2160 96 220 3317760 |
- | | 4096 2304 60 220 2211840 |
- | | 7680 4320 30 220 3888000 |
- | | 8192 4320 24 220 3317760 |
- | mpeg4-sw | 1920 1088 30 40 244800 244800 |
- | vp8 | 1280 720 240 100 864000 1036800 |
- | | 1920 1088 120 100 979200 |
- | | 3840 2160 30 100 972000 |
- | | 4096 2160 30 100 1036800 |
- | | 4096 2304 24 100 884736 |
- | vp9 | 1920 1088 480 220 3916800 3916800 |
- | | 3820 2160 120 220 3888000 |
- | | 4096 2160 96 220 3317760 |
- | | 4096 2304 60 220 2211840 |
- | | 7680 4320 30 220 3888000 |
- | | 8192 4320 24 220 3317760 |
- | vc1 | 1920 1088 30 20 244800 244800 |
- | div4/5/6-sw | 1920 1088 30 10 244800 244800 |
- | h263-sw | 864 480 30 2 48600 48600 |
- | mpeg2 | 1920 1088 30 40 244800 244800 |
- |_____________|_____________________________________________________|
-
- Secure decoder capabilities
- (MB is defined as 16x16)
- __________________________________________________________________
- | Codec | W H fps Mbps MB/s Max MB/s|
- |__________|_____________________________________________________|
- | h264 | 1280 720 60 40 216000 2073600 |
- | | 1920 1088 60 40 489600 |
- | | 3840 2160 60 40 1944000 |
- | | 4096 2160 60 40 2073600 |
- | | 4096 2304 30 40 1105920 |
- | hevc | 1280 720 60 40 216000 2073600 |
- | | 1920 1088 60 40 489600 |
- | | 3840 2160 60 40 1944000 |
- | | 4096 2160 60 40 2073600 |
- | | 4096 2304 30 40 1105920 |
- | vp9 | 1280 720 60 40 216000 2073600 |
- | | 1920 1088 60 40 489600 |
- | | 3840 2160 60 40 1944000 |
- | | 4096 2160 60 40 2073600 |
- | | 4096 2304 30 40 1105920 |
- | mpeg2 | 1920 1088 30 40 244800 244800 |
- |__________|_____________________________________________________|
-
- Non-Secure encoder capabilities (Secure not supported)
- (MB is defined as 16x16)
- __________________________________________________________________
- | Codec | W H fps Mbps MB/s Max MB/s|
- |__________|_____________________________________________________|
- | h264 | 1280 720 480 160 1728000 1958400 |
- | | 1920 1088 240 160 1958400 |
- | | 3840 2160 60 160 1944000 |
- | | 4096 2160 48 160 1658880 |
- | | 4096 2304 30 160 1105920 |
- | hevc | 1280 720 480 160 1728000 1958400 |
- | | 1920 1088 240 160 1958400 |
- | | 3840 2160 60 160 1944000 |
- | | 4096 2160 48 160 1658880 |
- | | 4096 2304 30 160 1105920 |
- | mpeg4-sw | 1280 720 30 40 108000 108000 |
- | vp8 | 1280 720 240 40 864000 1036800 |
- | | 1920 1088 120 40 979200 |
- | | 3840 2160 30 40 972000 |
- | | 4096 2160 30 40 1036800 |
- | | 4096 2304 24 40 884736 |
- | h263-sw | 864 480 30 2 48600 48600 |
- |__________|_____________________________________________________|
--->
-
-<MediaCodecs>
- <Include href="media_codecs_google_audio.xml" />
- <Include href="media_codecs_google_telephony.xml" />
- <Settings>
- <Setting name="max-video-encoder-input-buffers" value="11" />
- </Settings>
- <Encoders>
- <!-- Video Hardware -->
- <MediaCodec name="OMX.qcom.video.encoder.avc" type="video/avc" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Quirk name="requires-loaded-to-idle-after-allocation" />
- <Limit name="size" min="96x96" max="4096x2304" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="1958400" />
- <Limit name="bitrate" range="1-160000000" />
- <Limit name="frame-rate" range="1-480" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.encoder.vp8" type="video/x-vnd.on2.vp8" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Quirk name="requires-loaded-to-idle-after-allocation" />
- <Limit name="size" min="96x96" max="4096x2304" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="1036800" />
- <Limit name="bitrate" range="1-40000000" />
- <Limit name="frame-rate" range="1-240" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.encoder.hevc" type="video/hevc" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Quirk name="requires-loaded-to-idle-after-allocation" />
- <Limit name="size" min="96x96" max="4096x2304" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="1958400" />
- <Limit name="bitrate" range="1-160000000" />
- <Limit name="frame-rate" range="1-480" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <!-- Video Software -->
- <MediaCodec name="OMX.qcom.video.encoder.h263sw" type="video/3gpp" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Quirk name="requires-loaded-to-idle-after-allocation" />
- <Limit name="size" min="96x96" max="864x480" />
- <Limit name="alignment" value="4x4" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="48600" />
- <Limit name="bitrate" range="1-2000000" />
- <Limit name="frame-rate" range="1-30" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.encoder.mpeg4sw" type="video/mp4v-es" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Quirk name="requires-loaded-to-idle-after-allocation" />
- <Limit name="size" min="96x96" max="1280x720" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="108000" />
- <Limit name="bitrate" range="1-4000000" />
- <Limit name="frame-rate" range="1-30" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- </Encoders>
- <Decoders>
- <!-- Video Hardware -->
- <MediaCodec name="OMX.qcom.video.decoder.avc" type="video/avc" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="8192x4320" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="3916800" />
- <Limit name="bitrate" range="1-220000000" />
- <Limit name="frame-rate" range="1-480" />
- <Feature name="adaptive-playback" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.avc.secure" type="video/avc" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="4096x2304" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="2073600" />
- <Limit name="bitrate" range="1-40000000" />
- <Limit name="frame-rate" range="1-60" />
- <Feature name="adaptive-playback" />
- <Feature name="secure-playback" required="true" />
- <Limit name="concurrent-instances" max="6" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.mpeg2" type="video/mpeg2" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="1920x1088" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="244800" />
- <Limit name="bitrate" range="1-40000000" />
- <Limit name="frame-rate" range="1-30" />
- <Feature name="adaptive-playback" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.mpeg2.secure" type="video/mpeg2" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="1920x1088" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="244800" />
- <Limit name="bitrate" range="1-40000000" />
- <Limit name="frame-rate" range="1-30" />
- <Feature name="adaptive-playback" />
- <Feature name="secure-playback" required="true" />
- <Limit name="concurrent-instances" max="6" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.vp8" type="video/x-vnd.on2.vp8" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="4096x2304" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="1036800" />
- <Limit name="bitrate" range="1-100000000" />
- <Limit name="frame-rate" range="1-240" />
- <Feature name="adaptive-playback" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.vp9" type="video/x-vnd.on2.vp9" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="8192x4320" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="3916800" />
- <Limit name="bitrate" range="1-220000000" />
- <Limit name="frame-rate" range="1-480" />
- <Feature name="adaptive-playback" />
- <Limit name="concurrent-instances" max="6" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.vp9.secure" type="video/x-vnd.on2.vp9" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="4096x2304" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="2073600" />
- <Limit name="bitrate" range="1-40000000" />
- <Limit name="frame-rate" range="1-60" />
- <Feature name="adaptive-playback" />
- <Feature name="secure-playback" required="true" />
- <Limit name="concurrent-instances" max="6" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.hevc" type="video/hevc" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="8192x4320" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="3916800" />
- <Limit name="bitrate" range="1-220000000" />
- <Limit name="frame-rate" range="1-480" />
- <Feature name="adaptive-playback" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.hevc.secure" type="video/hevc" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="4096x2304" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="2073600" />
- <Limit name="bitrate" range="1-40000000" />
- <Limit name="frame-rate" range="1-60" />
- <Feature name="adaptive-playback" />
- <Feature name="secure-playback" required="true" />
- <Limit name="concurrent-instances" max="6" />
- </MediaCodec>
- <!-- Video Software -->
- <MediaCodec name="OMX.qti.video.decoder.h263sw" type="video/3gpp" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="864x480" />
- <Limit name="alignment" value="4x4" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="48600" />
- <Limit name="bitrate" range="1-2000000" />
- <Limit name="frame-rate" range="1-30" />
- <Feature name="adaptive-playback" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qti.video.decoder.mpeg4sw">
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Type name="video/mp4v-es">
- <Limit name="size" min="96x96" max="1920x1088" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="244800" />
- <Limit name="bitrate" range="1-40000000" />
- <Limit name="frame-rate" range="1-30" />
- <Limit name="concurrent-instances" max="16" />
- </Type>
- <Type name="video/mp4v-esdp">
- <Limit name="size" min="96x96" max="1920x1088" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="244800" />
- <Limit name="bitrate" range="1-40000000" />
- <Limit name="frame-rate" range="1-30" />
- <Limit name="concurrent-instances" max="16" />
- </Type>
- </MediaCodec>
- <MediaCodec name="OMX.qti.video.decoder.divxsw" type="video/divx" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="1920x1088" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="244800" />
- <Limit name="frame-rate" range="1-30" />
- <Limit name="bitrate" range="1-10000000" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qti.video.decoder.divx4sw" type="video/divx4" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="1920x1088" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="244800" />
- <Limit name="frame-rate" range="1-30" />
- <Limit name="bitrate" range="1-10000000" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- <MediaCodec name="OMX.qti.video.decoder.vc1sw" type="video/x-ms-wmv" >
- <Quirk name="requires-allocate-on-input-ports" />
- <Quirk name="requires-allocate-on-output-ports" />
- <Limit name="size" min="96x96" max="1920x1088" />
- <Limit name="alignment" value="2x2" />
- <Limit name="block-size" value="16x16" />
- <Limit name="blocks-per-second" min="36" max="244800" />
- <Limit name="bitrate" range="1-20000000" />
- <Limit name="frame-rate" range="1-30" />
- <Feature name="adaptive-playback" />
- <Limit name="concurrent-instances" max="16" />
- </MediaCodec>
- </Decoders>
- <Include href="media_codecs_google_video.xml" />
-</MediaCodecs>
diff --git a/media_codecs_performance.xml b/media_codecs_performance.xml
deleted file mode 100644
index b0fbf33..0000000
--- a/media_codecs_performance.xml
+++ /dev/null
@@ -1,141 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!--
-Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
-
-Not a Contribution.
-
-Copyright 2015 The Android Open Source Project
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-u may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
--->
-
-<MediaCodecs>
- <Encoders>
- <MediaCodec name="OMX.qcom.video.encoder.avc" type="video/avc" update="true">
- <Limit name="measured-frame-rate-320x240" range="238-238" />
- <Limit name="measured-frame-rate-720x480" range="123-123" />
- <Limit name="measured-frame-rate-1280x720" range="50-50" />
- <Limit name="measured-frame-rate-1920x1080" range="16-40" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.encoder.hevc" type="video/hevc" update="true">
- <Limit name="measured-frame-rate-320x240" range="226-226" />
- <Limit name="measured-frame-rate-720x480" range="121-121" />
- <Limit name="measured-frame-rate-1280x720" range="49-49" />
- <Limit name="measured-frame-rate-1920x1080" range="16-45" />
- <Limit name="measured-frame-rate-3840x2160" range="6-24" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.encoder.h263sw" type="video/3gpp" update="true">
- <Limit name="measured-frame-rate-176x144" range="303-303" />
- <Limit name="measured-frame-rate-352x288" range="259-259" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.encoder.mpeg4sw" type="video/mp4v-es" update="true">
- <Limit name="measured-frame-rate-176x144" range="299-299" />
- <Limit name="measured-frame-rate-352x288" range="245-245" />
- <Limit name="measured-frame-rate-640x480" range="148-148" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.encoder.vp8" type="video/x-vnd.on2.vp8" update="true">
- <Limit name="measured-frame-rate-320x180" range="266-266" />
- <Limit name="measured-frame-rate-640x360" range="165-165" />
- <Limit name="measured-frame-rate-1280x720" range="49-49" />
- <Limit name="measured-frame-rate-1920x1080" range="16-40" />
- </MediaCodec>
- <MediaCodec name="OMX.google.h264.encoder" type="video/avc" update="true">
- <Limit name="measured-frame-rate-320x240" range="215-215" />
- <Limit name="measured-frame-rate-720x480" range="100-100" />
- <Limit name="measured-frame-rate-1280x720" range="56-56" />
- <Limit name="measured-frame-rate-1920x1080" range="30-30" />
- </MediaCodec>
- <MediaCodec name="OMX.google.h263.encoder" type="video/3gpp" update="true">
- <Limit name="measured-frame-rate-176x144" range="200-200" />
- </MediaCodec>
- <MediaCodec name="OMX.google.mpeg4.encoder" type="video/mp4v-es" update="true">
- <Limit name="measured-frame-rate-176x144" range="180-180" />
- </MediaCodec>
- <MediaCodec name="OMX.google.vp8.encoder" type="video/x-vnd.on2.vp8" update="true">
- <Limit name="measured-frame-rate-320x180" range="39-39" />
- <Limit name="measured-frame-rate-640x360" range="32-32" />
- <Limit name="measured-frame-rate-1280x720" range="17-24" />
- <Limit name="measured-frame-rate-1920x1080" range="8-12" />
- </MediaCodec>
- </Encoders>
- <Decoders>
- <MediaCodec name="OMX.qcom.video.decoder.avc" type="video/avc" update="true">
- <Limit name="measured-frame-rate-320x240" range="221-221" />
- <Limit name="measured-frame-rate-720x480" range="156-156" />
- <Limit name="measured-frame-rate-1280x720" range="111-111" />
- <Limit name="measured-frame-rate-1920x1088" range="71-71" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.hevc" type="video/hevc" update="true">
- <Limit name="measured-frame-rate-352x288" range="222-222" />
- <Limit name="measured-frame-rate-720x480" range="165-165" />
- <Limit name="measured-frame-rate-1280x720" range="88-88" />
- <Limit name="measured-frame-rate-1920x1080" range="56-56" />
- <Limit name="measured-frame-rate-3840x2160" range="12-12" />
- </MediaCodec>
- <MediaCodec name="OMX.qti.video.decoder.h263sw" type="video/3gpp" update="true">
- <Limit name="measured-frame-rate-176x144" range="356-356" />
- <Limit name="measured-frame-rate-352x288" range="292-292" />
- </MediaCodec>
- <MediaCodec name="OMX.qti.video.decoder.mpeg4sw" type="video/mp4v-es" update="true">
- <Limit name="measured-frame-rate-176x144" range="146-146" />
- <Limit name="measured-frame-rate-480x360" range="145-145" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.vp8" type="video/x-vnd.on2.vp8" update="true">
- <Limit name="measured-frame-rate-320x240" range="337-337" />
- <Limit name="measured-frame-rate-640x360" range="337-337" />
- <Limit name="measured-frame-rate-1280x720" range="337-337" />
- <Limit name="measured-frame-rate-1920x1080" range="248-248" />
- </MediaCodec>
- <MediaCodec name="OMX.qcom.video.decoder.vp9" type="video/x-vnd.on2.vp9" update="true">
- <Limit name="measured-frame-rate-320x240" range="377-377" />
- <Limit name="measured-frame-rate-640x360" range="323-323" />
- <Limit name="measured-frame-rate-1280x720" range="262-262" />
- <Limit name="measured-frame-rate-1920x1080" range="220-220" />
- <Limit name="measured-frame-rate-3840x2160" range="51-51" />
- </MediaCodec>
- <MediaCodec name="OMX.google.h264.decoder" type="video/avc" update="true">
- <Limit name="measured-frame-rate-320x240" range="122-122" />
- <Limit name="measured-frame-rate-720x480" range="68-68" />
- <Limit name="measured-frame-rate-1280x720" range="32-32" />
- <Limit name="measured-frame-rate-1920x1080" range="6-10" />
- </MediaCodec>
- <MediaCodec name="OMX.google.h263.decoder" type="video/3gpp" update="true">
- <Limit name="measured-frame-rate-176x144" range="104-279" />
- <Limit name="measured-frame-rate-352x288" range="200-200" />
- </MediaCodec>
- <MediaCodec name="OMX.google.hevc.decoder" type="video/hevc" update="true">
- <Limit name="measured-frame-rate-352x288" range="170-170" />
- <Limit name="measured-frame-rate-640x360" range="89-89" />
- <Limit name="measured-frame-rate-720x480" range="73-73" />
- <Limit name="measured-frame-rate-1280x720" range="32-32" />
- <Limit name="measured-frame-rate-1920x1080" range="21-21" />
- </MediaCodec>
- <MediaCodec name="OMX.google.mpeg4.decoder" update="true">
- <Type name="video/mp4v-es">
- <Limit name="measured-frame-rate-176x144" range="430-450" />
- </Type>
- </MediaCodec>
- <MediaCodec name="OMX.google.vp8.decoder" type="video/x-vnd.on2.vp8" update="true">
- <Limit name="measured-frame-rate-320x240" range="330-381" />
- <Limit name="measured-frame-rate-640x360" range="139-185" />
- <Limit name="measured-frame-rate-1280x720" range="22-38" />
- <Limit name="measured-frame-rate-1920x1080" range="9-18" />
- </MediaCodec>
- <MediaCodec name="OMX.google.vp9.decoder" type="video/x-vnd.on2.vp9" update="true">
- <Limit name="measured-frame-rate-320x240" range="200-230" />
- <Limit name="measured-frame-rate-640x360" range="81-90" />
- <Limit name="measured-frame-rate-1280x720" range="32-40" />
- <Limit name="measured-frame-rate-1920x1080" range="19-23" />
- </MediaCodec>
- </Decoders>
-</MediaCodecs>
diff --git a/media_codecs_vendor_audio.xml b/media_codecs_vendor_audio.xml
deleted file mode 100644
index dd77026..0000000
--- a/media_codecs_vendor_audio.xml
+++ /dev/null
@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!-- Copyright (C) 2015-2018 The Linux Foundation. All rights reserved.
- Not a contribution.
- Copyright (C) 2012 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<Included>
- <Decoders>
- <!-- SimpleOMXComponet based software decoder-->
- <MediaCodec name="OMX.qti.audio.decoder.flac" type="audio/flac" >
- <Limit name="concurrent-instances" max="10" />
- </MediaCodec>
- <MediaCodec name="OMX.qti.audio.decoder.mpegh" type="audio/mhas" >
- <Limit name="concurrent-instances" max="10" />
- </MediaCodec>
- </Decoders>
-</Included>
diff --git a/media_profiles.xml b/media_profiles.xml
deleted file mode 100644
index 24f4475..0000000
--- a/media_profiles.xml
+++ /dev/null
@@ -1,1650 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2012-2017 The Linux Foundation. All rights reserved.
- Not a contribution.
- Copyright (C) 2010 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<!DOCTYPE MediaSettings [
-<!ELEMENT MediaSettings (CamcorderProfiles,
- EncoderOutputFileFormat+,
- VideoEncoderCap+,
- AudioEncoderCap+,
- VideoDecoderCap,
- AudioDecoderCap)>
-<!ELEMENT CamcorderProfiles (EncoderProfile+, ImageEncoding+, ImageDecoding, Camera)>
-<!ELEMENT EncoderProfile (Video, Audio)>
-<!ATTLIST EncoderProfile quality (high|low) #REQUIRED>
-<!ATTLIST EncoderProfile fileFormat (mp4|3gp) #REQUIRED>
-<!ATTLIST EncoderProfile duration (30|60) #REQUIRED>
-<!ATTLIST EncoderProfile cameraId (0|1|2|3) #REQUIRED>
-<!ELEMENT Video EMPTY>
-<!ATTLIST Video codec (h264|h263|m4v) #REQUIRED>
-<!ATTLIST Video bitRate CDATA #REQUIRED>
-<!ATTLIST Video width CDATA #REQUIRED>
-<!ATTLIST Video height CDATA #REQUIRED>
-<!ATTLIST Video frameRate CDATA #REQUIRED>
-<!ELEMENT Audio EMPTY>
-<!ATTLIST Audio codec (amrnb|amrwb|aac|lpcm) #REQUIRED>
-<!ATTLIST Audio bitRate CDATA #REQUIRED>
-<!ATTLIST Audio sampleRate CDATA #REQUIRED>
-<!ATTLIST Audio channels (1|2|6) #REQUIRED>
-<!ELEMENT ImageEncoding EMPTY>
-<!ATTLIST ImageEncoding quality (90|80|70|60|50|40) #REQUIRED>
-<!ELEMENT ImageDecoding EMPTY>
-<!ATTLIST ImageDecoding memCap CDATA #REQUIRED>
-<!ELEMENT Camera EMPTY>
-<!ELEMENT EncoderOutputFileFormat EMPTY>
-<!ATTLIST EncoderOutputFileFormat name (mp4|3gp) #REQUIRED>
-<!ELEMENT VideoEncoderCap EMPTY>
-<!ATTLIST VideoEncoderCap name (hevc|h264|h263|m4v|wmv) #REQUIRED>
-<!ATTLIST VideoEncoderCap enabled (true|false) #REQUIRED>
-<!ATTLIST VideoEncoderCap minBitRate CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap maxBitRate CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap minFrameWidth CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap maxFrameWidth CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap minFrameHeight CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap maxFrameHeight CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap minFrameRate CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap maxFrameRate CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap maxHFRFrameWidth CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap maxHFRFrameHeight CDATA #REQUIRED>
-<!ATTLIST VideoEncoderCap maxHFRMode CDATA #REQUIRED>
-<!ELEMENT AudioEncoderCap EMPTY>
-<!ATTLIST AudioEncoderCap name (amrnb|amrwb|aac|wma|lpcm) #REQUIRED>
-<!ATTLIST AudioEncoderCap enabled (true|false) #REQUIRED>
-<!ATTLIST AudioEncoderCap minBitRate CDATA #REQUIRED>
-<!ATTLIST AudioEncoderCap maxBitRate CDATA #REQUIRED>
-<!ATTLIST AudioEncoderCap minSampleRate CDATA #REQUIRED>
-<!ATTLIST AudioEncoderCap maxSampleRate CDATA #REQUIRED>
-<!ATTLIST AudioEncoderCap minChannels (1|2|6) #REQUIRED>
-<!ATTLIST AudioEncoderCap maxChannels (1|2|6) #REQUIRED>
-<!ELEMENT VideoDecoderCap EMPTY>
-<!ATTLIST VideoDecoderCap name (wmv) #REQUIRED>
-<!ATTLIST VideoDecoderCap enabled (true|false) #REQUIRED>
-<!ELEMENT AudioDecoderCap EMPTY>
-<!ATTLIST AudioDecoderCap name (wma) #REQUIRED>
-<!ATTLIST AudioDecoderCap enabled (true|false) #REQUIRED>
-<!ELEMENT VideoEditorCap EMPTY>
-<!ATTLIST VideoEditorCap maxInputFrameWidth CDATA #REQUIRED>
-<!ATTLIST VideoEditorCap maxInputFrameHeight CDATA #REQUIRED>
-<!ATTLIST VideoEditorCap maxOutputFrameWidth CDATA #REQUIRED>
-<!ATTLIST VideoEditorCap maxOutputFrameHeight CDATA #REQUIRED>
-<!ATTLIST VideoEditorCap maxPrefetchYUVFrames CDATA #REQUIRED>
-<!ELEMENT ExportVideoProfile EMPTY>
-<!ATTLIST ExportVideoProfile name (h264|h263|m4v) #REQUIRED>
-<!ATTLIST ExportVideoProfile profile CDATA #REQUIRED>
-<!ATTLIST ExportVideoProfile level CDATA #REQUIRED>
-]>
-<!--
- This file is used to declare the multimedia profiles and capabilities
- on an android-powered device.
--->
-<MediaSettings>
- <!-- Each camcorder profile defines a set of predefined configuration parameters -->
- <!-- Back Camera -->
- <CamcorderProfiles cameraId="0">
-
- <EncoderProfile quality="low" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="high" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qvga" fileFormat="mp4" duration="60">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="cif" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="720000"
- width="352"
- height="288"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="720"
- height="480"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="14000000"
- width="1280"
- height="720"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qhd" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="2560"
- height="1440"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="2k" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="2048"
- height="1080"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="4kdci" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="4096"
- height="2160"
- frameRate="24" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="2160p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qcif" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="vga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="720000"
- width="352"
- height="288"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
-
- <EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsevga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="14000000"
- width="1280"
- height="720"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapseqhd" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="2560"
- height="1440"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse2k" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="2048"
- height="1080"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse4kdci" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="4096"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse2160p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <ImageEncoding quality="95" />
- <ImageEncoding quality="80" />
- <ImageEncoding quality="70" />
- <ImageDecoding memCap="20000000" />
-
- </CamcorderProfiles>
- <!-- Front Camera -->
- <CamcorderProfiles cameraId="1">
-
- <EncoderProfile quality="low" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="high" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qvga" fileFormat="mp4" duration="60">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="cif" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="720000"
- width="352"
- height="288"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="720"
- height="480"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="14000000"
- width="1280"
- height="720"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qcif" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="vga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <!-- TIMELAPSE profiles for front camera -->
- <EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="1200000"
- width="352"
- height="288"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsevga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="5000000"
- width="720"
- height="480"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="8000000"
- width="1280"
- height="720"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <ImageEncoding quality="95" />
- <ImageEncoding quality="80" />
- <ImageEncoding quality="70" />
- <ImageDecoding memCap="20000000" />
-
- </CamcorderProfiles>
- <!-- Camera ID 2 -->
- <CamcorderProfiles cameraId="2">
-
- <EncoderProfile quality="low" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="high" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qvga" fileFormat="mp4" duration="60">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="cif" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="720000"
- width="352"
- height="288"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="720"
- height="480"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="14000000"
- width="1280"
- height="720"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qhd" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="2560"
- height="1440"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="2k" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="2048"
- height="1080"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="4kdci" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="4096"
- height="2160"
- frameRate="24" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="2160p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qcif" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="vga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="720000"
- width="352"
- height="288"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
-
- <EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsevga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="14000000"
- width="1280"
- height="720"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapseqhd" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="2560"
- height="1440"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse2k" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="2048"
- height="1080"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse4kdci" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="4096"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse2160p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="highspeed1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="1920"
- height="1080"
- frameRate="120" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="highspeedhigh" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="24000000"
- width="1280"
- height="720"
- frameRate="240" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="highspeed720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="24000000"
- width="1280"
- height="720"
- frameRate="240" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="highspeed480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="12000000"
- width="640"
- height="480"
- frameRate="240" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <ImageEncoding quality="95" />
- <ImageEncoding quality="80" />
- <ImageEncoding quality="70" />
- <ImageDecoding memCap="20000000" />
-
- </CamcorderProfiles>
-
- <CamcorderProfiles cameraId="3">
-
- <EncoderProfile quality="low" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="high" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qvga" fileFormat="mp4" duration="60">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="cif" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="720000"
- width="352"
- height="288"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="720"
- height="480"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="14000000"
- width="1280"
- height="720"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qhd" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="2560"
- height="1440"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="2k" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="2048"
- height="1080"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="4kdci" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="4096"
- height="2160"
- frameRate="24" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="2160p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="qcif" fileFormat="3gp" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="vga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="720000"
- width="352"
- height="288"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
-
- <EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapsevga" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="2000000"
- width="640"
- height="480"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="14000000"
- width="1280"
- height="720"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="1920"
- height="1080"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapseqhd" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="2560"
- height="1440"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse2k" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="20000000"
- width="2048"
- height="1080"
- frameRate="30" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse4kdci" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="4096"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="timelapse2160p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <EncoderProfile quality="highspeed1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="1920"
- height="1080"
- frameRate="120" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="highspeedhigh" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="24000000"
- width="1280"
- height="720"
- frameRate="240" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="highspeed720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="24000000"
- width="1280"
- height="720"
- frameRate="240" />
-
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <EncoderProfile quality="highspeed480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="12000000"
- width="640"
- height="480"
- frameRate="240" />
-
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <ImageEncoding quality="95" />
- <ImageEncoding quality="80" />
- <ImageEncoding quality="70" />
- <ImageDecoding memCap="20000000" />
-
- </CamcorderProfiles>
-
- <EncoderOutputFileFormat name="3gp" />
- <EncoderOutputFileFormat name="mp4" />
-
- <!--
- If a codec is not enabled, it is invisible to the applications
- In other words, the applications won't be able to use the codec
- or query the capabilities of the codec at all if it is disabled
- -->
- <VideoEncoderCap name="h264" enabled="true"
- minBitRate="64000" maxBitRate="42000000"
- minFrameWidth="176" maxFrameWidth="4096"
- minFrameHeight="144" maxFrameHeight="2160"
- minFrameRate="15" maxFrameRate="30"
- maxHFRFrameWidth="1920" maxHFRFrameHeight="1080"
- maxHFRMode="120" />
-
- <VideoEncoderCap name="h263" enabled="true"
- minBitRate="64000" maxBitRate="2000000"
- minFrameWidth="176" maxFrameWidth="800"
- minFrameHeight="144" maxFrameHeight="480"
- minFrameRate="15" maxFrameRate="30"
- maxHFRFrameWidth="0" maxHFRFrameHeight="0"
- maxHFRMode="0" />
-
- <VideoEncoderCap name="m4v" enabled="true"
- minBitRate="64000" maxBitRate="20000000"
- minFrameWidth="176" maxFrameWidth="1920"
- minFrameHeight="144" maxFrameHeight="1088"
- minFrameRate="15" maxFrameRate="30"
- maxHFRFrameWidth="0" maxHFRFrameHeight="0"
- maxHFRMode="0" />
-
- <VideoEncoderCap name="hevc" enabled="true"
- minBitRate="64000" maxBitRate="100000000"
- minFrameWidth="176" maxFrameWidth="4096"
- minFrameHeight="144" maxFrameHeight="2160"
- minFrameRate="15" maxFrameRate="30"
- maxHFRFrameWidth="0" maxHFRFrameHeight="0"
- maxHFRMode="0" />
-
- <AudioEncoderCap name="aac" enabled="true"
- minBitRate="8000" maxBitRate="96000"
- minSampleRate="8000" maxSampleRate="48000"
- minChannels="1" maxChannels="6" />
-
- <AudioEncoderCap name="heaac" enabled="true"
- minBitRate="8000" maxBitRate="64000"
- minSampleRate="16000" maxSampleRate="48000"
- minChannels="1" maxChannels="1" />
-
- <AudioEncoderCap name="aaceld" enabled="true"
- minBitRate="16000" maxBitRate="192000"
- minSampleRate="16000" maxSampleRate="48000"
- minChannels="1" maxChannels="1" />
-
- <AudioEncoderCap name="amrwb" enabled="true"
- minBitRate="6600" maxBitRate="23850"
- minSampleRate="16000" maxSampleRate="16000"
- minChannels="1" maxChannels="1" />
-
- <AudioEncoderCap name="amrnb" enabled="true"
- minBitRate="5525" maxBitRate="12200"
- minSampleRate="8000" maxSampleRate="8000"
- minChannels="1" maxChannels="1" />
-
- <AudioEncoderCap name="lpcm" enabled="true"
- minBitRate="768000" maxBitRate="4608000"
- minSampleRate="8000" maxSampleRate="48000"
- minChannels="1" maxChannels="6" />
-
- <!--
- FIXME:
- We do not check decoder capabilities at present
- At present, we only check whether windows media is visible
- for TEST applications. For other applications, we do
- not perform any checks at all.
- -->
- <VideoDecoderCap name="wmv" enabled="true"/>
- <AudioDecoderCap name="wma" enabled="true"/>
-
- <!--
- The VideoEditor Capability configuration:
- - maxInputFrameWidth: maximum video width of imported video clip.
- - maxInputFrameHeight: maximum video height of imported video clip.
- - maxOutputFrameWidth: maximum video width of exported video clip.
- - maxOutputFrameHeight: maximum video height of exported video clip.
- - maxPrefetchYUVFrames: maximum prefetch YUV frames for encoder,
- used to limit the amount of memory for prefetched YUV frames.
- For this platform, it allows maximum 30MB(3MB per 1080p frame x 10
- frames) memory.
- -->
- <VideoEditorCap maxInputFrameWidth="1920"
- maxInputFrameHeight="1088" maxOutputFrameWidth="1920"
- maxOutputFrameHeight="1088" maxPrefetchYUVFrames="10"/>
- <!--
- The VideoEditor Export codec profile and level values
- correspond to the values in OMX_Video.h.
- E.g. for h264, profile value 1 means OMX_VIDEO_AVCProfileBaseline
- and level 4096 means OMX_VIDEO_AVCLevel41.
- Please note that the values are in decimal.
- These values are for video encoder.
- -->
- <!--
- Codec = h.264, Baseline profile, level 4.0
- -->
- <ExportVideoProfile name="h264" profile= "1" level="2048"/>
- <!--
- Codec = h.263, Baseline profile, level 70
- -->
- <ExportVideoProfile name="h263" profile= "1" level="128"/>
- <!--
- Codec = mpeg4, Simple profile, level 5
- -->
- <ExportVideoProfile name="m4v" profile= "1" level="128"/>
-</MediaSettings>
diff --git a/media_profiles_V1_0.xml b/media_profiles_V1_0.xml
deleted file mode 100644
index bee4016..0000000
--- a/media_profiles_V1_0.xml
+++ /dev/null
@@ -1,551 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright 2016 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<!DOCTYPE MediaSettings SYSTEM "/system/etc/media_profiles_V1_0.dtd">
-<!--
- This file is used to declare the multimedia profiles and capabilities
- on an android-powered device.
--->
-<MediaSettings>
- <!-- ****************************************************************** -->
- <!-- camera id = 0 : logical dual rear cameras (wide is 3, tele is 4) -->
- <!-- ****************************************************************** -->
- <CamcorderProfiles cameraId="0">
-
- <!-- low: 176 x 144 30fps -->
- <EncoderProfile quality="low" fileFormat="3gp" duration="60">
- <Video codec="h264"
- bitRate="128000"
- width="176"
- height="144"
- frameRate="30" />
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <!-- high: 3840 x 2160 30fps -->
- <EncoderProfile quality="high" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="48000000"
- width="3840"
- height="2160"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- qcif: 176 x 144 30fps -->
- <EncoderProfile quality="qcif" fileFormat="3gp" duration="60">
- <Video codec="h264"
- bitRate="128000"
- width="176"
- height="144"
- frameRate="30" />
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <!-- qvga: 320 x 240 30fps -->
- <EncoderProfile quality="qvga" fileFormat="mp4" duration="60">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <!-- cif: 352 x 288 30fps -->
- <EncoderProfile quality="cif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="1200000"
- width="352"
- height="288"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- 480p: 720 x 480 30fps -->
- <EncoderProfile quality="480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="6000000"
- width="720"
- height="480"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- 720p: 1280 x 720 60fps -->
- <EncoderProfile quality="720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="18000000"
- width="1280"
- height="720"
- frameRate="60" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- 1080p: 1920 x 1080 60fps -->
- <EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="33000000"
- width="1920"
- height="1080"
- frameRate="60" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- 2160p: 3840 x 2160 30fps -->
- <EncoderProfile quality="2160p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="48000000"
- width="3840"
- height="2160"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_qcif: 176 x 144 30fps -->
- <EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_cif: 352 x 288 30fps -->
- <EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="1200000"
- width="352"
- height="288"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_480p: 720 x 480 30fps -->
- <EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="6000000"
- width="720"
- height="480"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_720p: 1280 x 720 30fps -->
- <EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="12000000"
- width="1280"
- height="720"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_1080p: 1920 x 1080 30fps -->
- <EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="17000000"
- width="1920"
- height="1080"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_2160p: 3840 x 2160 30fps -->
- <EncoderProfile quality="timelapse2160p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="42000000"
- width="3840"
- height="2160"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- highspeed_low: 1920 x 1080 240fps 63.0 Mbps -->
- <EncoderProfile quality="highspeedlow" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="63000000"
- width="1920"
- height="1080"
- frameRate="240" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- highspeed_high: 1920 x 1080 240fps 63.0 Mbps -->
- <EncoderProfile quality="highspeedhigh" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="63000000"
- width="1920"
- height="1080"
- frameRate="240" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- highspeed_1080p: 1920 x 1080 240fps 63.0 Mbps -->
- <EncoderProfile quality="highspeed1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="63000000"
- width="1920"
- height="1080"
- frameRate="240" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <ImageEncoding quality="95" />
- <ImageEncoding quality="80" />
- <ImageEncoding quality="70" />
- <ImageDecoding memCap="20000000" />
- </CamcorderProfiles>
-
- <!-- ****************************************************************** -->
- <!-- camera id = 1 : front RGBD cameras -->
- <!-- ****************************************************************** -->
- <CamcorderProfiles cameraId="1">
-
- <!-- low: 176 x 144 30fps -->
- <EncoderProfile quality="low" fileFormat="3gp" duration="60">
- <Video codec="h264"
- bitRate="128000"
- width="176"
- height="144"
- frameRate="30" />
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <!-- high: 1920 x 1080 30fps -->
- <EncoderProfile quality="high" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="22000000"
- width="1920"
- height="1080"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- qcif: 176 x 144 30fps -->
- <EncoderProfile quality="qcif" fileFormat="3gp" duration="60">
- <Video codec="h264"
- bitRate="128000"
- width="176"
- height="144"
- frameRate="30" />
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <!-- qvga: 320 x 240 30fps -->
- <EncoderProfile quality="qvga" fileFormat="mp4" duration="60">
- <Video codec="h264"
- bitRate="512000"
- width="320"
- height="240"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="156000"
- sampleRate="48000"
- channels="2" />
- </EncoderProfile>
-
- <!-- cif: 352 x 288 30fps -->
- <EncoderProfile quality="cif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="1200000"
- width="352"
- height="288"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- 480p: 720 x 480 30fps -->
- <EncoderProfile quality="480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="6000000"
- width="720"
- height="480"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- 720p: 1280 x 720 30fps -->
- <EncoderProfile quality="720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="12000000"
- width="1280"
- height="720"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- 1080p: 1920 x 1080 30fps -->
- <EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="22000000"
- width="1920"
- height="1080"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_qcif: 176 x 144 30fps -->
- <EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="192000"
- width="176"
- height="144"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="amrnb"
- bitRate="12200"
- sampleRate="8000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_cif: 352 x 288 30fps -->
- <EncoderProfile quality="timelapsecif" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="1200000"
- width="352"
- height="288"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_480p: 720 x 480 30fps -->
- <EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="6000000"
- width="720"
- height="480"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_720p: 1280 x 720 30fps -->
- <EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="12000000"
- width="1280"
- height="720"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <ImageEncoding quality="95" />
- <ImageEncoding quality="80" />
- <ImageEncoding quality="70" />
- <ImageDecoding memCap="20000000" />
- </CamcorderProfiles>
-
- <!-- ****************************************************************** -->
- <!-- camera id = 2 : logical dual IR cameras (lead is 6, follower is 7) -->
- <!-- ****************************************************************** -->
- <CamcorderProfiles cameraId="2">
-
- <!-- 480p: 640 x 480 30fps -->
- <EncoderProfile quality="480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="6000000"
- width="640"
- height="480"
- frameRate="30" />
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <!-- timelapse_480p: 640 x 480 30fps -->
- <EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
- <Video codec="h264"
- bitRate="6000000"
- width="640"
- height="480"
- frameRate="30" />
- <!-- audio setting is ignored -->
- <Audio codec="aac"
- bitRate="96000"
- sampleRate="48000"
- channels="1" />
- </EncoderProfile>
-
- <ImageEncoding quality="95" />
- <ImageEncoding quality="80" />
- <ImageEncoding quality="70" />
- <ImageDecoding memCap="20000000" />
- </CamcorderProfiles>
-
- <EncoderOutputFileFormat name="3gp" />
- <EncoderOutputFileFormat name="mp4" />
-
- <!--
- If a codec is not enabled, it is invisible to the applications
- In other words, the applications won't be able to use the codec
- or query the capabilities of the codec at all if it is disabled
- -->
- <VideoEncoderCap name="hevc" enabled="true"
- minBitRate="64000" maxBitRate="100000000"
- minFrameWidth="176" maxFrameWidth="3840"
- minFrameHeight="144" maxFrameHeight="2160"
- minFrameRate="15" maxFrameRate="30" />
-
- <VideoEncoderCap name="h264" enabled="true"
- minBitRate="64000" maxBitRate="100000000"
- minFrameWidth="176" maxFrameWidth="3840"
- minFrameHeight="144" maxFrameHeight="2160"
- minFrameRate="15" maxFrameRate="30" />
-
- <VideoEncoderCap name="h263" enabled="true"
- minBitRate="64000" maxBitRate="2000000"
- minFrameWidth="176" maxFrameWidth="800"
- minFrameHeight="144" maxFrameHeight="480"
- minFrameRate="15" maxFrameRate="30" />
-
- <VideoEncoderCap name="m4v" enabled="true"
- minBitRate="64000" maxBitRate="40000000"
- minFrameWidth="176" maxFrameWidth="1920"
- minFrameHeight="144" maxFrameHeight="1080"
- minFrameRate="15" maxFrameRate="30" />
-
- <AudioEncoderCap name="aac" enabled="true"
- minBitRate="758" maxBitRate="288000"
- minSampleRate="8000" maxSampleRate="48000"
- minChannels="1" maxChannels="2" />
-
- <AudioEncoderCap name="heaac" enabled="true"
- minBitRate="8000" maxBitRate="64000"
- minSampleRate="16000" maxSampleRate="48000"
- minChannels="1" maxChannels="2" />
-
- <AudioEncoderCap name="aaceld" enabled="true"
- minBitRate="16000" maxBitRate="192000"
- minSampleRate="16000" maxSampleRate="48000"
- minChannels="1" maxChannels="2" />
-
- <AudioEncoderCap name="amrwb" enabled="true"
- minBitRate="6600" maxBitRate="23050"
- minSampleRate="16000" maxSampleRate="16000"
- minChannels="1" maxChannels="1" />
-
- <AudioEncoderCap name="amrnb" enabled="true"
- minBitRate="5525" maxBitRate="12200"
- minSampleRate="8000" maxSampleRate="8000"
- minChannels="1" maxChannels="1" />
-
- <!--
- FIXME:
- We do not check decoder capabilities at present
- At present, we only check whether windows media is visible
- for TEST applications. For other applications, we do
- not perform any checks at all.
- -->
- <VideoDecoderCap name="wmv" enabled="false"/>
- <AudioDecoderCap name="wma" enabled="false"/>
-</MediaSettings>
diff --git a/nfc/libese-hal-st.conf b/nfc/libese-hal-st.conf
deleted file mode 100644
index 1954bf7..0000000
--- a/nfc/libese-hal-st.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-########################### Start of libese-hal-st.conf ###########################
-###############################################################################
-###############################################################################
-# ST HAL trace log level
-STESE_HAL_LOGLEVEL=1
-ST_ESE_DEV_NODE="/dev/st54j_se"
diff --git a/nfc/libnfc-hal-st.conf b/nfc/libnfc-hal-st.conf
deleted file mode 100644
index 47153d9..0000000
--- a/nfc/libnfc-hal-st.conf
+++ /dev/null
@@ -1,148 +0,0 @@
-########################### Start of libnf-hal-st_aosp.conf ###########################
-
-###############################################################################
-###############################################################################
-# ST HAL trace log level
-STNFC_HAL_LOGLEVEL=1
-NFC_DEBUG_ENABLED=0
-
-###############################################################################
-# Vendor specific mode to enable FW (RF & SWP) traces.
-STNFC_FW_DEBUG_ENABLED=0
-
-###############################################################################
-# File used for NFA storage
-NFA_STORAGE="/data/nfc"
-
-###############################################################################
-# Keep the nfa storage file.
-PRESERVE_STORAGE=1
-
-###############################################################################
-# In Switch OFF mode (phone switched-off), specify the desired CE mode to
-# the controller.
-# 0: No card-emulation; DEFAULT
-# 1: Switch-off card-emulation enabled
-CE_ON_SWITCH_OFF_STATE=1
-
-###############################################################################
-# Vendor specific mode to support the USB charging mode if VPSIO=1 in switch off.
-STNFC_USB_CHARGING_MODE=1
-
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-# byte[0] NCI_PROTOCOL_18092_ACTIVE
-# byte[1] NCI_PROTOCOL_B_PRIME
-# byte[2] NCI_PROTOCOL_DUAL
-# byte[3] NCI_PROTOCOL_15693
-# byte[4] NCI_PROTOCOL_KOVIO
-# byte[5] NCI_PROTOCOL_MIFARE
-# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05:FF:FF:06:8A:90:77:FF:FF}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag. If not defined,
-# the default value is 1.
-# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate
-# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0
-# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3
-# 5 NFA_RW_PRES_CHK_ISO_DEP_NAK; presence check command ISO-DEP NAK as per NCI2.0
-PRESENCE_CHECK_ALGORITHM=5
-
-###############################################################################
-# Name of the NCI HAL module to use
-# If unset, falls back to nfc_nci.bcm2079x
-NCI_HAL_MODULE="nfc_nci.st21nfc"
-
-###############################################################################
-# White list to be set at startup.
-DEVICE_HOST_WHITE_LIST={02:C0}
-
-###############################################################################
-# BAIL OUT value for P2P
-# Implements algorithm for NFC-DEP protocol priority over ISO-DEP protocol.
-POLL_BAIL_OUT_MODE=1
-
-###############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe. If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
-# for each EE (ESE/SIM)
-OFF_HOST_ESE_PIPE_ID=0x5E
-OFF_HOST_SIM_PIPE_ID=0x3E
-
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host 0x00
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_SYS_CODE_ROUTE=0x86
-
-###############################################################################
-#Set the Felica T3T System Code supported power state:
-DEFAULT_SYS_CODE_PWR_STATE=0x3B
-
-###############################################################################
-# Path and Files used for FW update binaries storage
-STNFC_FW_PATH_STORAGE="/vendor/firmware"
-STNFC_FW_BIN_NAME="/st54j_fw.bin"
-STNFC_FW_CONF_NAME="/st54j_conf.bin"
-
-###############################################################################
-# Default off-host route for Felica.
-# This settings will be used when application does not set this parameter
-# host 0x00
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_NFCF_ROUTE=0x86
-
-###############################################################################
-# Configure the default off-host route.
-# used for technology A and B routing
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_OFFHOST_ROUTE=0x81
-
-###############################################################################
-# Configure the default AID route.
-# host 0x00
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_ROUTE=0x00
-
-###############################################################################
-# Configure the NFCEEIDs of offhost UICC.
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-OFFHOST_ROUTE_UICC={81}
-
-###############################################################################
-# Configure the NFCEEIDs of offhost eSEs.
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-OFFHOST_ROUTE_ESE={86}
-
-###############################################################################
-# Configure the list of NFCEE for the ISO-DEP routing.
-# host 0x00
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_ISODEP_ROUTE=0x81
-
-###############################################################################
-# Core configuration settings
-CORE_CONF_PROP={ 20, 02, 0a, 03,
- a1, 01, 1e,
- a2, 01, 19,
- 80, 01, 01
-}
-
-
diff --git a/nfc/libnfc-nci.conf b/nfc/libnfc-nci.conf
deleted file mode 100644
index 149f1bb..0000000
--- a/nfc/libnfc-nci.conf
+++ /dev/null
@@ -1,102 +0,0 @@
-###############################################################################
-# Application options
-NFC_DEBUG_ENABLED=0
-
-###############################################################################
-# File used for NFA storage
-NFA_STORAGE="/data/nfc"
-
-###############################################################################
-# Force UICC to only listen to the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
-UICC_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# AID for Empty Select command
-# If specified, this AID will be substituted when an Empty SELECT command is
-# detected. The first byte is the length of the AID. Maximum length is 16.
-AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
-
-###############################################################################
-# When screen is turned off, specify the desired power state of the controller.
-# 0: power-off-sleep state; DEFAULT
-# 1: full-power state
-# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
-SCREEN_OFF_POWER_STATE=1
-
-###############################################################################
-# Force tag polling for the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
-# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
-# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
-# NFA_TECHNOLOGY_MASK_ACTIVE
-#
-# Notable bits:
-# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
-# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
-# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
-# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
-# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
-# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */
-POLLING_TECH_MASK=0x2F
-
-###############################################################################
-# Force P2P to only listen for the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
-# NFA_TECHNOLOGY_MASK_ACTIVE
-#
-# Notable bits:
-# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
-# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
-# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */
-P2P_LISTEN_TECH_MASK=0x00
-
-PRESERVE_STORAGE=0x01
-
-###############################################################################
-# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
-# The value is set to 3 by default as it assumes we will discover 0xF2,
-# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
-# so that the stack will not wait any longer than necessary.
-# Maximum EE supported number
-# NXP PN547C2 0x02
-# NXP PN65T 0x03
-# NXP PN548C2 0x02
-# NXP PN66T 0x03
-NFA_MAX_EE_SUPPORTED=0x02
-
-###############################################################################
-# AID_MATCHING constants
-# AID_MATCHING_EXACT_ONLY 0x00
-# AID_MATCHING_EXACT_OR_PREFIX 0x01
-# AID_MATCHING_PREFIX_ONLY 0x02
-# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
-AID_MATCHING_MODE=0x03
-
-###############################################################################
-#Set the default Felica T3T System Code :
-#This settings will be used when application does not set this parameter
-DEFAULT_SYS_CODE={FE:FE}
-
-###############################################################################
-# Value of NIC parameter NFCC_COFNIG_CONTROL
-# 0x00 NFCC is not allowed to manage RF configuration
-# 0x01 NFCC is allowed to manage RF configuration
-NFCC_CONFIG_CONTROL=0x01
-
-###############################################################################
-#Set if the AID routing should be blocked for the power modes not supported.
-NFA_AID_BLOCK_ROUTE=1
-
-###############################################################################
-#Set the OffHost AID supported power state:
-OFFHOST_AID_ROUTE_PWR_STATE=0x3B
-
-###############################################################################
-# Mifare Tag implementation
-# 0: General implementation
-# 1: Legacy implementation
-LEGACY_MIFARE_READER=0
diff --git a/overlay/frameworks/base/core/res/res/values-mcc440-mnc20/config.xml b/overlay/frameworks/base/core/res/res/values-mcc440-mnc20/config.xml
deleted file mode 100644
index 0fdd49e..0000000
--- a/overlay/frameworks/base/core/res/res/values-mcc440-mnc20/config.xml
+++ /dev/null
@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2016, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-** http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<!-- These resources are around just to allow their values to be customized
- for different hardware and product builds. -->
-<resources>
- <!-- Entitlement APP provisioning for Tethering -->
- <string-array translatable="false" name="config_mobile_hotspot_provision_app">
- <item>com.google.android.tetheringentitlement</item>
- <item>com.google.android.tetheringentitlement.CarrierEntitlementActivity</item>
- </string-array>
- <string translatable="false" name="config_mobile_hotspot_provision_app_no_ui">com.google.android.carrierentitlement.SILENT_ENTITLEMENT_CHECK</string>
- <string translatable="false" name="config_mobile_hotspot_provision_response">com.google.android.carrierentitlement.SILENT_ENTITLEMENT_CHECK_RESULT</string>
-</resources>
\ No newline at end of file
diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
deleted file mode 100755
index 6bbec7c..0000000
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ /dev/null
@@ -1,293 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2018, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-** http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-
- <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
- Software implementation will be used if config_hardware_auto_brightness_available is not set -->
- <bool name="config_automatic_brightness_available">true</bool>
-
- <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used
- for debouncing the light sensor. Different constants are used to debounce the light sensor
- when adapting to brighter or darker environments. This parameter controls how quickly
- brightness changes occur in response to an observed change in light level that exceeds the
- hysteresis threshold. -->
- <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
- <integer name="config_autoBrightnessDarkeningLightDebounce">4000</integer>
-
- <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
- <bool name="config_unplugTurnsOnScreen">true</bool>
-
- <!-- Enable Night display, which requires HWC 2.0. -->
- <bool name="config_nightDisplayAvailable">true</bool>
-
- <!-- Boolean indicating whether display white balance is supported. -->
- <bool name="config_displayWhiteBalanceAvailable">true</bool>
-
- <!-- List supported color modes. -->
- <integer-array name="config_availableColorModes">
- <item>0</item> <!-- COLOR_MODE_NATURAL -->
- <item>1</item> <!-- COLOR_MODE_BOOSTED -->
- <item>3</item> <!-- COLOR_MODE_AUTOMATIC -->
- </integer-array>
-
- <!-- Color mode to use when accessibility transforms are enabled. This color mode must be
- supported by the device, but not necessarily appear in config_availableColorModes. The
- regularly selected color mode will be used if this value is negative. -->
- <integer name="config_accessibilityColorMode">2</integer>
-
- <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently
- in hardware. -->
- <bool name="config_setColorTransformAccelerated">true</bool>
-
- <!-- Boolean indicating if restoring network selection should be skipped -->
- <!-- The restoring is handled by modem if it is true -->
- <bool translatable="false" name="skip_restoring_network_selection">true</bool>
-
- <!-- If device has a sensor that can wake-up the lock screen -->
- <bool name="config_dozeWakeLockScreenSensorAvailable">true</bool>
-
- <!-- If device supports pickup/lift gesture -->
- <bool name="config_dozePulsePickup">true</bool>
-
- <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
- <bool name="config_cellBroadcastAppLinks">true</bool>
-
- <!-- Whether Multiuser UI should be shown -->
- <bool name="config_enableMultiUserUI">true</bool>
-
- <!-- Maximum number of supported users -->
- <integer name="config_multiuserMaximumUsers">4</integer>
-
- <!-- Whether Hearing Aid profile is supported -->
- <bool name="config_hearing_aid_profile_supported">true</bool>
-
- <!-- List of regexpressions describing the interface (if any) that represent tetherable
- USB interfaces. If the device doesn't want to support tething over USB this should
- be empty. An example would be "usb.*" -->
- <string-array translatable="false" name="config_tether_usb_regexs">
- <item>"usb\\d"</item>
- <item>"rndis\\d"</item>
- </string-array>
-
- <!-- List of regexpressions describing the interface (if any) that represent tetherable
- Wifi interfaces. If the device doesn't want to support tethering over Wifi this
- should be empty. An example would be "softap.*" -->
- <string-array translatable="false" name="config_tether_wifi_regexs">
- <item>"wlan\\d"</item>
- </string-array>
-
- <!-- List of regexpressions describing the interface (if any) that represent tetherable
- bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this
- should be empty. -->
- <string-array translatable="false" name="config_tether_bluetooth_regexs">
- <item>"bt-pan"</item>
- </string-array>
-
- <!-- Boolean indicating if current platform supports HFP inband ringing -->
- <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool>
-
- <bool translatable="false" name="config_tether_upstream_automatic">true</bool>
-
- <!-- This string array should be overridden by the device to present a list of network
- attributes. This is used by the connectivity manager to decide which networks can coexist
- based on the hardware -->
- <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
- [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] -->
- <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
- before automatically restore the default connection. Set -1 if the connection
- does not require auto-restore. -->
- <!-- the 6th element indicates boot-time dependency-met value. -->
- <string-array translatable="false" name="networkAttributes">
- <item>"wifi,1,1,1,-1,true"</item>
- <item>"mobile,0,0,0,-1,true"</item>
- <item>"mobile_mms,2,0,2,60000,true"</item>
- <item>"mobile_supl,3,0,2,60000,true"</item>
- <item>"mobile_dun,4,0,2,60000,true"</item>
- <item>"mobile_hipri,5,0,3,60000,true"</item>
- <item>"mobile_fota,10,0,2,60000,true"</item>
- <item>"mobile_ims,11,0,2,60000,true"</item>
- <item>"mobile_cbs,12,0,2,60000,true"</item>
- <item>"mobile_ia,14,0,2,-1,true"</item>
- <item>"bluetooth,7,7,2,-1,true"</item>
- <item>"ethernet,9,9,9,-1,true"</item>
- <item>"mobile_emergency,15,0,2,-1,true</item>
- </string-array>
-
- <!-- This string array should be overridden by the device to present a list of radio
- attributes. This is used by the connectivity manager to decide which networks can coexist
- based on the hardware -->
- <!-- An Array of "[ConnectivityManager connectionType],
- [# simultaneous connection types]" -->
- <string-array translatable="false" name="radioAttributes">
- <item>"1,1"</item>
- <item>"0,1"</item>
- <item>"7,1"</item>
- <item>"9,1"</item>
- </string-array>
-
- <!-- If the hardware supports specially marking packets that caused a wakeup of the
- main CPU, set this value to the mark used. -->
- <integer name="config_networkWakeupPacketMark">0x80000000</integer>
-
- <!-- Mask to use when checking skb mark defined in config_networkWakeupPacketMark above. -->
- <integer name="config_networkWakeupPacketMask">0x80000000</integer>
-
- <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
- <bool translatable="false" name="config_wifi_dual_band_support">true</bool>
-
- <!-- Boolean indicating whether the wifi chipset requires the softap band be -->
- <!-- converted from 5GHz to ANY due to hardware restrictions -->
- <bool translatable="false" name="config_wifi_convert_apband_5ghz_to_any">true</bool>
-
- <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform -->
- <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">true</bool>
-
- <!-- Boolean indicating whether the wifi chipset has background scan support -->
- <bool translatable="false" name="config_wifi_background_scan_support">true</bool>
-
-
- <!-- Wifi driver supports batched scan -->
- <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool>
-
- <!-- Boolean indicating whether or not to revert to default country code when cellular
- radio is unable to find any MCC information to infer wifi country code from -->
- <bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">false</bool>
-
- <!-- Boolean indicating whether or not wifi should turn off when emergency call is made -->
- <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">true</bool>
-
- <!-- ImsService package name to bind to by default, if config_dynamic_bind_ims is true -->
- <string name="config_ims_package">org.codeaurora.ims</string>
-
- <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically -->
- <bool name="config_dynamic_bind_ims">true</bool>
-
- <!-- Specifies whether to decouple the auto-suspend state of the device from the display on/off state. -->
- <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
-
- <!-- Specifies whether to decouple the interactive state of the device from the display on/off state. -->
- <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
-
- <!-- Is the device capable of hot swapping an UICC Card -->
- <bool name="config_hotswapCapable">true</bool>
-
- <!-- Flag specifying whether VoLTE is availasble on device -->
- <bool name="config_device_volte_available">true</bool>
-
- <!-- Flag specifying whether VoLTE is available on device -->
- <bool name="config_device_vt_available">true</bool>
-
- <!-- Enable video pause workaround when enabling/disabling the camera. -->
- <bool name="config_useVideoPauseWorkaround">true</bool>
-
- <!-- Flag specifying whether WFC over IMS is availasble on device -->
- <bool name="config_device_wfc_ims_available">true</bool>
-
- <!-- Configure mobile tcp buffer sizes in the form:
- rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
- If no value is found for the rat-name in use, the system default will be applied.
- -->
- <string-array name="config_mobile_tcp_buffers">
- <item>umts:131072,262144,1452032,4096,16384,399360</item>
- <item>hspa:131072,262144,2441216,4096,16384,399360</item>
- <item>hsupa:131072,262144,2441216,4096,16384,399360</item>
- <item>hsdpa:131072,262144,2441216,4096,16384,399360</item>
- <item>hspap:131072,262144,2441216,4096,16384,399360</item>
- <item>edge:16384,32768,131072,4096,16384,65536</item>
- <item>gprs:4096,8192,24576,4096,8192,24576</item>
- <item>1xrtt:16384,32768,131070,4096,16384,102400</item>
- <item>evdo:131072,262144,1048576,4096,16384,524288</item>
- <item>lte:524288,1048576,8388608,262144,524288,4194304</item>
- </string-array>
-
- <!-- Configure wifi tcp buffersizes in the form:
- rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
- <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,8388608,262144,524288,4194304</string>
-
- <!-- Idle Receive current for wifi radio. 0 by default-->
- <integer translatable="false" name="config_wifi_idle_receive_cur_ma">1</integer>
-
- <!-- Rx current for wifi radio. 0 by default-->
- <integer translatable="false" name="config_wifi_active_rx_cur_ma">100</integer>
-
- <!-- Tx current for wifi radio. 0 by default-->
- <integer translatable="false" name="config_wifi_tx_cur_ma">250</integer>
-
- <!-- Operating volatage for wifi radio. 0 by default-->
- <integer translatable="false" name="config_wifi_operating_voltage_mv">3800</integer>
-
- <!-- Config SoftAP 2G channel list -->
- <string translatable="false" name="config_wifi_framework_sap_2G_channel_list">6</string>
-
- <!-- Config determines whether to update phone object when voice registration
- state changes. Voice radio tech change will always trigger an update of
- phone object irrespective of this config -->
- <bool name="config_switch_phone_on_voice_reg_state_change">false</bool>
-
- <!-- Number of physical SIM slots on the device. This includes both eSIM and pSIM slots, and
- is not necessarily the same as the number of phones/logical modems supported by the device.
- For example, a multi-sim device can have 2 phones/logical modems, but 3 physical slots,
- or a single SIM device can have 1 phones/logical modems, but 2 physical slots (one eSIM
- and one pSIM) -->
- <integer name="config_num_physical_slots">2</integer>
-
- <!-- Disables compatibility WAL mode.
- In this mode, only database journal mode will be changed, connection pool
- size will still be limited to a single connection. -->
- <bool name="db_compatibility_wal_supported">false</bool>
-
- <!-- Use ERI text for network name on CDMA LTE -->
- <bool name="config_LTE_eri_for_network_name">false</bool>
-
- <!-- An array of device capabilities defined by GSMA SGP.22 v2.0, and their corresponding major
- version. -->
- <string-array translatable="false" name="config_telephonyEuiccDeviceCapabilities">
- <item>"gsm,11"</item>
- <item>"utran,11"</item>
- <item>"cdma1x,1"</item>
- <item>"hrpd,3"</item>
- <item>"ehrpd,12"</item>
- <item>"eutran,11"</item>
- </string-array>
-
- <!-- Whether the new Auto Selection Network UI should be shown -->
- <bool name="config_enableNewAutoSelectNetworkUI">true</bool>
-
- <!-- Enable ACS (auto channel selection) for Wifi hotspot (SAP) -->
- <bool translatable="false" name="config_wifi_softap_acs_supported">true</bool>
-
- <!-- Enable 802.11ac for Wifi hotspot (SAP) -->
- <bool translatable="false" name="config_wifi_softap_ieee80211ac_supported">true</bool>
-
- <!-- Integer thresholds, do not connect to APs with RSSI lower than these values -->
- <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_5GHz">-77</integer>
- <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_24GHz">-80</integer>
- <!-- Integer thresholds for low network score, should be somewhat less than the entry threshholds -->
- <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-80</integer>
- <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-83</integer>
-
- <!-- Enables or disables haptic effect when the text insertion/selection handle is moved
- manually by the user. Off by default, since the expected haptic feedback may not be
- available on some devices. -->
- <bool name="config_enableHapticTextHandle">true</bool>
- <!-- Enable Zram writeback feature to allow unused pages in zram be written to flash. -->
- <bool name="config_zramWriteback">true</bool>
-
-</resources>
diff --git a/overlay/frameworks/base/core/res/res/values/strings.xml b/overlay/frameworks/base/core/res/res/values/strings.xml
deleted file mode 100644
index e1daaad..0000000
--- a/overlay/frameworks/base/core/res/res/values/strings.xml
+++ /dev/null
@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2017, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-** http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<!-- These resources are around just to allow their values to be customized
- for different hardware and product builds. Do not translate. -->
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
- <!-- Do not translate. Default access point SSID used for tethering -->
- <string name="wifi_tether_configure_ssid_default" translatable="false">Pixel</string>
-</resources>
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values-mcc440-mnc20/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values-mcc440-mnc20/config.xml
deleted file mode 100644
index f9741d7..0000000
--- a/overlay/frameworks/base/packages/SystemUI/res/values-mcc440-mnc20/config.xml
+++ /dev/null
@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2018, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You my obtain a copy of the License at
-**
-** http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<!-- These resources are around just to allow their values to be customized
- for different hardware and product builds. -->
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
- <!-- Control whether status bar should distinguish HSPA data icon from UMTS
- data icon on devices -->
- <bool name="config_hspa_data_distinguishable">false</bool>
-</resources>
diff --git a/overlay/packages/apps/Bluetooth/res/values/config.xml b/overlay/packages/apps/Bluetooth/res/values/config.xml
deleted file mode 100644
index 9b1b241..0000000
--- a/overlay/packages/apps/Bluetooth/res/values/config.xml
+++ /dev/null
@@ -1,18 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright 2019 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-<resources>
- <bool name="profile_supported_sap">true</bool>
-</resources>
diff --git a/overlay/packages/apps/Settings/res/raw/face_enroll_introduction_animation.mp4 b/overlay/packages/apps/Settings/res/raw/face_enroll_introduction_animation.mp4
deleted file mode 100644
index 03aea2f..0000000
--- a/overlay/packages/apps/Settings/res/raw/face_enroll_introduction_animation.mp4
+++ /dev/null
Binary files differ
diff --git a/overlay/packages/apps/Settings/res/values-mcc262-mnc01/strings.xml b/overlay/packages/apps/Settings/res/values-mcc262-mnc01/strings.xml
deleted file mode 100644
index cff4d80..0000000
--- a/overlay/packages/apps/Settings/res/values-mcc262-mnc01/strings.xml
+++ /dev/null
@@ -1,22 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2017, The Android Open Source Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-** http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<resources>
- <string name="wifi_calling_settings_title">WLAN Call</string>
-</resources>
diff --git a/overlay/packages/apps/Settings/res/values/bools.xml b/overlay/packages/apps/Settings/res/values/bools.xml
deleted file mode 100755
index bb93789..0000000
--- a/overlay/packages/apps/Settings/res/values/bools.xml
+++ /dev/null
@@ -1,20 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright 2017 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<resources>
- <!-- Whether to show a preference item for mobile plan -->
- <bool name="config_show_mobile_plan">false</bool>
-</resources>
diff --git a/overlay/packages/apps/Settings/res/values/config.xml b/overlay/packages/apps/Settings/res/values/config.xml
deleted file mode 100755
index c2ac3b4..0000000
--- a/overlay/packages/apps/Settings/res/values/config.xml
+++ /dev/null
@@ -1,23 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright 2018 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<resources>
- <!-- Whether or not the device is capable of multiple levels of vibration intensity.
- Note that this is different from whether it can control the vibration amplitude as some
- devices will be able to vary their amplitude but do not possess enough dynamic range to
- have distinct intensity levels -->
- <bool name="config_vibration_supports_multiple_intensities">true</bool>
-</resources>
diff --git a/overlay/packages/services/Telephony/res/values/config.xml b/overlay/packages/services/Telephony/res/values/config.xml
deleted file mode 100644
index 4072b9e..0000000
--- a/overlay/packages/services/Telephony/res/values/config.xml
+++ /dev/null
@@ -1,31 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2017 The Android Open Source Project
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- Phone app resources that may need to be customized
- for different hardware or product builds. -->
-<resources>
- <!-- Allow handover from telephony calls to another ConnectionService. -->
- <bool name="config_support_handover_from">true</bool>
-
- <!-- Flag indicating whether the device supports RTT (real-time text) -->
- <bool name="config_support_rtt">true</bool>
-
- <!-- This device supports the AudioManager Telephony audio device and output onto this
- device using {@link AudioDeviceInfo#TYPE_TELEPHONY}.
- This is used to support carriers which generate a recording tone to the remote party
- when a call recording app is in use. -->
- <bool name="config_support_telephony_audio_device">true</bool>
-</resources>
diff --git a/p2p_supplicant_overlay.conf b/p2p_supplicant_overlay.conf
deleted file mode 100644
index d66504c..0000000
--- a/p2p_supplicant_overlay.conf
+++ /dev/null
@@ -1,2 +0,0 @@
-disable_scan_offload=1
-p2p_go_vht=1
diff --git a/pixelstats/Android.bp b/pixelstats/Android.bp
deleted file mode 100644
index d6c8e01..0000000
--- a/pixelstats/Android.bp
+++ /dev/null
@@ -1,36 +0,0 @@
-//
-// Copyright (C) 2017 The Android Open Source Project
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-cc_binary {
- name: "pixelstats-vendor",
- init_rc: ["pixelstats-vendor.bramble.rc"],
- srcs: [
- "service.cpp",
- ],
- shared_libs: [
- "libbase",
- "libbinder",
- "libcutils",
- "libhidlbase",
- "libhidltransport",
- "liblog",
- "libutils",
- "libpixelstats",
- ],
- proprietary: true,
- static_libs: ["chre_client"],
- header_libs: ["chre_api"],
-}
-
diff --git a/pixelstats/pixelstats-vendor.bramble.rc b/pixelstats/pixelstats-vendor.bramble.rc
deleted file mode 100644
index 9410090..0000000
--- a/pixelstats/pixelstats-vendor.bramble.rc
+++ /dev/null
@@ -1,4 +0,0 @@
-service vendor.pixelstats_vendor /vendor/bin/pixelstats-vendor
- class hal
- user system
- group system
diff --git a/pixelstats/service.cpp b/pixelstats/service.cpp
deleted file mode 100644
index 5e8abc5..0000000
--- a/pixelstats/service.cpp
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (C) 2018 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "pixelstats"
-
-#include <android-base/logging.h>
-#include <utils/StrongPointer.h>
-
-#include <pixelstats/DropDetect.h>
-#include <pixelstats/SysfsCollector.h>
-#include <pixelstats/UeventListener.h>
-
-using android::sp;
-using android::hardware::google::pixel::DropDetect;
-using android::hardware::google::pixel::SysfsCollector;
-using android::hardware::google::pixel::UeventListener;
-
-#define UFSHC_PATH(filename) "/sys/devices/platform/soc/1d84000.ufshc/" #filename
-const struct SysfsCollector::SysfsPaths sysfs_paths = {
- .SlowioReadCntPath = UFSHC_PATH(slowio_read_cnt),
- .SlowioWriteCntPath = UFSHC_PATH(slowio_write_cnt),
- .SlowioUnmapCntPath = UFSHC_PATH(slowio_unmap_cnt),
- .SlowioSyncCntPath = UFSHC_PATH(slowio_sync_cnt),
- .CycleCountBinsPath = "/sys/class/power_supply/maxfg/cycle_counts_bins",
- .ImpedancePath = "/sys/class/misc/msm_cirrus_playback/resistance_left_right",
- .CodecPath = "", // b/117976641
-};
-
-const char *const kAudioUevent = "/kernel/q6audio/q6voice_uevent";
-
-int main() {
- LOG(INFO) << "starting PixelStats";
-
- // b/118713028 Expect failure until drop detect nanoapp is enabled
- sp<DropDetect> dropDetector = DropDetect::start();
- if (!dropDetector) {
- LOG(ERROR) << "Unable to launch drop detection";
- return 1;
- }
-
- UeventListener ueventListener(kAudioUevent);
- std::thread listenThread(&UeventListener::ListenForever, &ueventListener);
- listenThread.detach();
-
- SysfsCollector collector(sysfs_paths);
- collector.collect(); // This blocks forever.
-
- return 0;
-}
diff --git a/power/hint-data.h b/power/hint-data.h
deleted file mode 100644
index 0cb54c2..0000000
--- a/power/hint-data.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2012, 2013, 2015, 2017, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Default use-case hint IDs */
-#define DEFAULT_VIDEO_ENCODE_HINT_ID (0x0A00)
-#define DEFAULT_VIDEO_DECODE_HINT_ID (0x0B00)
-#define DISPLAY_STATE_HINT_ID (0x0C00)
-#define DISPLAY_STATE_HINT_ID_2 (0x0D00)
-#define CAM_PREVIEW_HINT_ID (0x0E00)
-#define SUSTAINED_PERF_HINT_ID (0x0F00)
-#define VR_MODE_HINT_ID (0x1000)
-#define VR_MODE_SUSTAINED_PERF_HINT_ID (0x1001)
-
-#define AOSP_DELTA (0x1200)
-
-#define VSYNC_HINT AOSP_DELTA + POWER_HINT_VSYNC
-#define INTERACTION_HINT AOSP_DELTA + POWER_HINT_INTERACTION
-#define VIDEO_DECODE_HINT AOSP_DELTA + POWER_HINT_VIDEO_DECODE
-#define VIDEO_ENCODE_HINT AOSP_DELTA + POWER_HINT_VIDEO_ENCODE
-#define LOW_POWER_HINT AOSP_DELTA + POWER_HINT_LOW_POWER
-#define SUSTAINED_PERF_HINT AOSP_DELTA + POWER_HINT_SUSTAINED_PERFORMANCE
-#define VR_MODE_HINT AOSP_DELTA + POWER_HINT_VR_MODE
-#define LAUNCH_HINT AOSP_DELTA + POWER_HINT_LAUNCH
-#define DISABLE_TOUCH_HINT AOSP_DELTA + POWER_HINT_DISABLE_TOUCH
-
-#define VR_MODE_SUSTAINED_PERF_HINT (0x1301)
-
-
-struct hint_data {
- unsigned long hint_id; /* This is our key. */
- unsigned long perflock_handle;
-};
-
-int hint_compare(struct hint_data *first_hint,
- struct hint_data *other_hint);
-void hint_dump(struct hint_data *hint);
diff --git a/power/list.h b/power/list.h
deleted file mode 100644
index d68c3df..0000000
--- a/power/list.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (c) 2012, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-struct list_node {
- struct list_node *next;
- void *data;
- int (*compare)(void *data1, void *data2);
- void (*dump)(void *data);
-};
-
-int init_list_head(struct list_node *head);
-struct list_node * add_list_node(struct list_node *head, void *data);
-int remove_list_node(struct list_node *head, struct list_node *del_node);
-void dump_list(struct list_node *head);
-struct list_node *find_node(struct list_node *head, void *comparison_data);
diff --git a/power/metadata-defs.h b/power/metadata-defs.h
deleted file mode 100644
index c464900..0000000
--- a/power/metadata-defs.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#define ATTRIBUTE_VALUE_DELIM ('=')
-#define ATTRIBUTE_STRING_DELIM (";")
-
-#define METADATA_PARSING_ERR (-1)
-#define METADATA_PARSING_CONTINUE (0)
-#define METADATA_PARSING_DONE (1)
-
-#define MIN(x,y) (((x)>(y))?(y):(x))
-
-struct video_encode_metadata_t {
- int hint_id;
- int state;
-};
-
-struct video_decode_metadata_t {
- int hint_id;
- int state;
-};
-
-int parse_metadata(char *metadata, char **metadata_saveptr,
- char *attribute, int attribute_size, char *value, int value_size);
-int parse_video_encode_metadata(char *metadata,
- struct video_encode_metadata_t *video_encode_metadata);
-int parse_video_decode_metadata(char *metadata,
- struct video_decode_metadata_t *video_decode_metadata);
diff --git a/power/performance.h b/power/performance.h
deleted file mode 100644
index b7bf34b..0000000
--- a/power/performance.h
+++ /dev/null
@@ -1,265 +0,0 @@
-/* Copyright (c) 2012, 2014, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define FAILED -1
-#define SUCCESS 0
-#define INDEFINITE_DURATION 0
-
-/* Hints sent to perf HAL from power HAL
- * These have to be kept in sync with Perf HAL side definitions
- */
-#define VENDOR_HINT_DISPLAY_OFF 0x00001040
-#define VENDOR_HINT_DISPLAY_ON 0x00001041
-
-enum SCREEN_DISPLAY_TYPE {
- DISPLAY_OFF = 0x00FF,
-};
-
-enum PWR_CLSP_TYPE {
- ALL_CPUS_PWR_CLPS_DIS = 0x101,
-};
-
-/* For CPUx min freq, the leftmost byte
- * represents the CPU and the
- * rightmost byte represents the frequency
- * All intermediate frequencies on the
- * device are supported. The hex value
- * passed into PerfLock will be multiplied
- * by 10^5. This frequency or the next
- * highest frequency available will be set
- *
- * For example, if 1.4 Ghz is required on
- * CPU0, use 0x20E
- *
- * If the highest available frequency
- * on the device is required, use
- * CPUx_MIN_FREQ_TURBO_MAX
- * where x represents the CPU
- */
-enum CPU0_MIN_FREQ_LVL {
- CPU0_MIN_FREQ_NONTURBO_MAX = 0x20A,
- CPU0_MIN_FREQ_TURBO_MAX = 0x2FE,
-};
-
-enum CPU1_MIN_FREQ_LVL {
- CPU1_MIN_FREQ_NONTURBO_MAX = 0x30A,
- CPU1_MIN_FREQ_TURBO_MAX = 0x3FE,
-};
-
-enum CPU2_MIN_FREQ_LVL {
- CPU2_MIN_FREQ_NONTURBO_MAX = 0x40A,
- CPU2_MIN_FREQ_TURBO_MAX = 0x4FE,
-};
-
-enum CPU3_MIN_FREQ_LVL {
- CPU3_MIN_FREQ_NONTURBO_MAX = 0x50A,
- CPU3_MIN_FREQ_TURBO_MAX = 0x5FE,
-};
-
-enum CPU0_MAX_FREQ_LVL {
- CPU0_MAX_FREQ_NONTURBO_MAX = 0x150A,
-};
-
-enum CPU1_MAX_FREQ_LVL {
- CPU1_MAX_FREQ_NONTURBO_MAX = 0x160A,
-};
-
-enum CPU2_MAX_FREQ_LVL {
- CPU2_MAX_FREQ_NONTURBO_MAX = 0x170A,
-};
-
-enum CPU3_MAX_FREQ_LVL {
- CPU3_MAX_FREQ_NONTURBO_MAX = 0x180A,
-};
-
-enum MIN_CPUS_ONLINE_LVL {
- CPUS_ONLINE_MIN_2 = 0x702,
- CPUS_ONLINE_MIN_3 = 0x703,
- CPUS_ONLINE_MIN_4 = 0x704,
- CPUS_ONLINE_MPD_OVERRIDE = 0x777,
- CPUS_ONLINE_MAX = 0x7FF,
-};
-
-enum MAX_CPUS_ONLINE_LVL {
- CPUS_ONLINE_MAX_LIMIT_1 = 0x8FE,
- CPUS_ONLINE_MAX_LIMIT_2 = 0x8FD,
- CPUS_ONLINE_MAX_LIMIT_3 = 0x8FC,
- CPUS_ONLINE_MAX_LIMIT_4 = 0x8FB,
- CPUS_ONLINE_MAX_LIMIT_MAX = 0x8FB,
-};
-
-enum SAMPLING_RATE_LVL {
- MS_500 = 0xBCD,
- MS_50 = 0xBFA,
- MS_20 = 0xBFD,
-};
-
-enum ONDEMAND_IO_BUSY_LVL {
- IO_BUSY_OFF = 0xC00,
- IO_BUSY_ON = 0xC01,
-};
-
-enum ONDEMAND_SAMPLING_DOWN_FACTOR_LVL {
- SAMPLING_DOWN_FACTOR_1 = 0xD01,
- SAMPLING_DOWN_FACTOR_4 = 0xD04,
-};
-
-enum INTERACTIVE_TIMER_RATE_LVL {
- TR_MS_500 = 0xECD,
- TR_MS_100 = 0xEF5,
- TR_MS_50 = 0xEFA,
- TR_MS_30 = 0xEFC,
- TR_MS_20 = 0xEFD,
-};
-
-/* This timer rate applicable to cpu0
- across 8939 series chipset */
-enum INTERACTIVE_TIMER_RATE_LVL_CPU0_8939 {
- TR_MS_CPU0_500 = 0x30CD,
- TR_MS_CPU0_100 = 0x30F5,
- TR_MS_CPU0_50 = 0x30FA,
- TR_MS_CPU0_30 = 0x30FC,
- TR_MS_CPU0_20 = 0x30FD,
-};
-
-/* This timer rate applicable to cpu4
- across 8939 series chipset */
-enum INTERACTIVE_TIMER_RATE_LVL_CPU4_8939 {
- TR_MS_CPU4_500 = 0x3BCD,
- TR_MS_CPU4_100 = 0x3BF5,
- TR_MS_CPU4_50 = 0x3BFA,
- TR_MS_CPU4_30 = 0x3BFC,
- TR_MS_CPU4_20 = 0x3BFD,
-};
-
-/* This timer rate applicable to big.little arch */
-enum INTERACTIVE_TIMER_RATE_LVL_BIG_LITTLE {
- BIG_LITTLE_TR_MS_100 = 0x64,
- BIG_LITTLE_TR_MS_50 = 0x32,
- BIG_LITTLE_TR_MS_40 = 0x28,
- BIG_LITTLE_TR_MS_30 = 0x1E,
- BIG_LITTLE_TR_MS_20 = 0x14,
-};
-
-/* INTERACTIVE opcodes */
-enum INTERACTIVE_OPCODES {
- INT_OP_CLUSTER0_TIMER_RATE = 0x41424000,
- INT_OP_CLUSTER1_TIMER_RATE = 0x41424100,
- INT_OP_CLUSTER0_USE_SCHED_LOAD = 0x41430000,
- INT_OP_CLUSTER1_USE_SCHED_LOAD = 0x41430100,
- INT_OP_CLUSTER0_USE_MIGRATION_NOTIF = 0x41434000,
- INT_OP_CLUSTER1_USE_MIGRATION_NOTIF = 0x41434100,
- INT_OP_NOTIFY_ON_MIGRATE = 0x4241C000
-};
-
-enum INTERACTIVE_HISPEED_FREQ_LVL {
- HS_FREQ_1026 = 0xF0A,
-};
-
-enum INTERACTIVE_HISPEED_LOAD_LVL {
- HISPEED_LOAD_90 = 0x105A,
-};
-
-enum SYNC_FREQ_LVL {
- SYNC_FREQ_300 = 0x1103,
- SYNC_FREQ_600 = 0X1106,
- SYNC_FREQ_384 = 0x1103,
- SYNC_FREQ_NONTURBO_MAX = 0x110A,
- SYNC_FREQ_TURBO = 0x110F,
-};
-
-enum OPTIMAL_FREQ_LVL {
- OPTIMAL_FREQ_300 = 0x1203,
- OPTIMAL_FREQ_600 = 0x1206,
- OPTIMAL_FREQ_384 = 0x1203,
- OPTIMAL_FREQ_NONTURBO_MAX = 0x120A,
- OPTIMAL_FREQ_TURBO = 0x120F,
-};
-
-enum SCREEN_PWR_CLPS_LVL {
- PWR_CLPS_DIS = 0x1300,
- PWR_CLPS_ENA = 0x1301,
-};
-
-enum THREAD_MIGRATION_LVL {
- THREAD_MIGRATION_SYNC_OFF = 0x1400,
-};
-
-enum INTERACTIVE_IO_BUSY_LVL {
- INTERACTIVE_IO_BUSY_OFF = 0x1B00,
- INTERACTIVE_IO_BUSY_ON = 0x1B01,
-};
-
-enum SCHED_BOOST_LVL {
- SCHED_BOOST_ON = 0x1E01,
-};
-
-enum CPU4_MIN_FREQ_LVL {
- CPU4_MIN_FREQ_NONTURBO_MAX = 0x1F0A,
- CPU4_MIN_FREQ_TURBO_MAX = 0x1FFE,
-};
-
-enum CPU5_MIN_FREQ_LVL {
- CPU5_MIN_FREQ_NONTURBO_MAX = 0x200A,
- CPU5_MIN_FREQ_TURBO_MAX = 0x20FE,
-};
-
-enum CPU6_MIN_FREQ_LVL {
- CPU6_MIN_FREQ_NONTURBO_MAX = 0x210A,
- CPU6_MIN_FREQ_TURBO_MAX = 0x21FE,
-};
-
-enum CPU7_MIN_FREQ_LVL {
- CPU7_MIN_FREQ_NONTURBO_MAX = 0x220A,
- CPU7_MIN_FREQ_TURBO_MAX = 0x22FE,
-};
-
-enum CPU4_MAX_FREQ_LVL {
- CPU4_MAX_FREQ_NONTURBO_MAX = 0x230A,
-};
-
-enum CPU5_MAX_FREQ_LVL {
- CPU5_MAX_FREQ_NONTURBO_MAX = 0x240A,
-};
-
-enum CPU6_MAX_FREQ_LVL {
- CPU6_MAX_FREQ_NONTURBO_MAX = 0x250A,
-};
-
-enum CPU7_MAX_FREQ_LVL {
- CPU7_MAX_FREQ_NONTURBO_MAX = 0x260A,
-};
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/power/power-common.h b/power/power-common.h
deleted file mode 100644
index 5ba5e81..0000000
--- a/power/power-common.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (c) 2013, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#define NODE_MAX (64)
-
-#define SCALING_GOVERNOR_PATH "/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor"
-#define DCVS_CPU0_SLACK_MAX_NODE "/sys/module/msm_dcvs/cores/cpu0/slack_time_max_us"
-#define DCVS_CPU0_SLACK_MIN_NODE "/sys/module/msm_dcvs/cores/cpu0/slack_time_min_us"
-#define MPDECISION_SLACK_MAX_NODE "/sys/module/msm_mpdecision/slack_time_max_us"
-#define MPDECISION_SLACK_MIN_NODE "/sys/module/msm_mpdecision/slack_time_min_us"
-#define SCALING_MIN_FREQ "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq"
-#define ONDEMAND_GOVERNOR "ondemand"
-#define INTERACTIVE_GOVERNOR "interactive"
-#define MSMDCVS_GOVERNOR "msm-dcvs"
-
-#define HINT_HANDLED (0)
-#define HINT_NONE (-1)
-
-enum CPU_GOV_CHECK {
- CPU0 = 0,
- CPU1 = 1,
- CPU2 = 2,
- CPU3 = 3
-};
diff --git a/power/powerhintparser.h b/power/powerhintparser.h
deleted file mode 100644
index 5f9cbe6..0000000
--- a/power/powerhintparser.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Copyright (c) 2016, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef __POWERHINTPARSER__
-#define __POWERHINTPARSER__
-
-#define POWERHINT_XML "/vendor/etc/powerhint.xml"
-#define MAX_HINT 6
-#define MAX_PARAM 30
-
-typedef struct perflock_param_t {
- int type;
- int numParams;
- int paramList[MAX_PARAM];//static limit on number of hints - 15
-}perflock_param_t;
-
-static perflock_param_t powerhint[MAX_HINT];
-
-int parsePowerhintXML();
-int *getPowerhint(int, int*);
-
-#endif /* __POWERHINTPARSER__ */
diff --git a/power/utils.h b/power/utils.h
deleted file mode 100644
index 4c3dc7f..0000000
--- a/power/utils.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (c) 2012-2013,2015-2017, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <cutils/properties.h>
-
-int sysfs_read(char *path, char *s, int num_bytes);
-int sysfs_write(char *path, char *s);
-int get_scaling_governor(char governor[], int size);
-int get_scaling_governor_check_cores(char governor[], int size,int core_num);
-int is_interactive_governor(char*);
-
-void vote_ondemand_io_busy_off();
-void unvote_ondemand_io_busy_off();
-void vote_ondemand_sdf_low();
-void unvote_ondemand_sdf_low();
-void perform_hint_action(int hint_id, int resource_values[],
- int num_resources);
-void undo_hint_action(int hint_id);
-void release_request(int lock_handle);
-int interaction_with_handle(int lock_handle, int duration, int num_args, int opt_list[]);
-int perf_hint_enable(int hint_id, int duration);
diff --git a/powerhint.json b/powerhint.json
deleted file mode 100644
index 1087869..0000000
--- a/powerhint.json
+++ /dev/null
@@ -1,650 +0,0 @@
-{
- "Nodes": [
- {
- "Name": "CPULittleClusterMaxFreq",
- "Path": "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq",
- "Values": [
- "9999999",
- "1267200",
- "1171200",
- "1113600"
- ],
- "DefaultIndex": 0,
- "ResetOnInit": true
- },
- {
- "Name": "CPULittleClusterMinFreq",
- "Path": "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq",
- "Values": [
- "9999999",
- "1267200",
- "1171200",
- "1113600",
- "300000"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "CPUBigClusterMaxFreq",
- "Path": "/sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq",
- "Values": [
- "9999999",
- "2016000",
- "1497600",
- "1401600"
- ],
- "DefaultIndex": 0,
- "ResetOnInit": true
- },
- {
- "Name": "CPUBigClusterMinFreq",
- "Path": "/sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq",
- "Values": [
- "9999999",
- "1497600",
- "1401600",
- "1286400",
- "0"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "CPUBigPlusClusterMaxFreq",
- "Path": "/sys/devices/system/cpu/cpu7/cpufreq/scaling_max_freq",
- "Values": [
- "9999999",
- "2016000",
- "1497600",
- "1401600"
- ],
- "DefaultIndex": 0,
- "ResetOnInit": true
- },
- {
- "Name": "CPUBigPlusClusterMinFreq",
- "Path": "/sys/devices/system/cpu/cpu7/cpufreq/scaling_min_freq",
- "Values": [
- "9999999",
- "1497600",
- "1401600",
- "1286400",
- "0"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "GPUMaxFreq",
- "Path": "/sys/class/kgsl/kgsl-3d0/devfreq/max_freq",
- "Values": [
- "600000000",
- "379650000"
- ],
- "DefaultIndex": 0,
- "ResetOnInit": true
- },
- {
- "Name": "GPUMinFreq",
- "Path": "/sys/class/kgsl/kgsl-3d0/devfreq/min_freq",
- "Values": [
- "553850000",
- "379650000",
- "309110000"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "GPUBusMinFreq",
- "Path": "/sys/class/devfreq/soc:qcom,gpubw/min_freq",
- "Values": [
- "6881",
- "5931",
- "3879",
- "0"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "GPUForceRailOn",
- "Path": "/sys/class/kgsl/kgsl-3d0/force_rail_on",
- "Values": [
- "1",
- "0"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "GPUForceClkOn",
- "Path": "/sys/class/kgsl/kgsl-3d0/force_clk_on",
- "Values": [
- "1",
- "0"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "GPUIdleTimer",
- "Path": "/sys/class/kgsl/kgsl-3d0/idle_timer",
- "Values": [
- "10000",
- "80"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "TASchedtuneBoost",
- "Path": "/dev/stune/top-app/schedtune.boost",
- "Values": [
- "50",
- "10"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "CPUBWHystTriggerCount",
- "Path": "/sys/class/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/hyst_trigger_count",
- "Values": [
- "0",
- "3"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "CPUBWHistMemory",
- "Path": "/sys/class/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/hist_memory",
- "Values": [
- "0",
- "20"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "CPUBWHystLength",
- "Path": "/sys/class/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/hyst_length",
- "Values": [
- "0",
- "10"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "CPUBWSampleMs",
- "Path": "/sys/class/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/sample_ms",
- "Values": [
- "10",
- "4"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "CPUBWIOPercent",
- "Path": "/sys/class/devfreq/soc:qcom,cpu-cpu-llcc-bw/bw_hwmon/io_percent",
- "Values": [
- "80",
- "34"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "CPUBWMinFreq",
- "Path": "/sys/class/devfreq/soc:qcom,cpu-cpu-llcc-bw/min_freq",
- "Values": [
- "11856",
- "8132",
- "6149",
- "2288"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "LLCCBWMinFreq",
- "Path": "/sys/class/devfreq/soc:qcom,cpu-llcc-ddr-bw/min_freq",
- "Values": [
- "6881",
- "2597",
- "762"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "LLCCBWSampleMs",
- "Path": "/sys/class/devfreq/soc:qcom,cpu-llcc-ddr-bw/bw_hwmon/sample_ms",
- "Values": [
- "10",
- "4"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "L3LittleClusterMinFreq",
- "Path": "/sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/min_freq",
- "Values": [
- "1440000000",
- "300000000"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "L3BigClusterMinFreq",
- "Path": "/sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/min_freq",
- "Values": [
- "1440000000",
- "300000000"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "PMQoSCpuDmaLatency",
- "Path": "/dev/cpu_dma_latency",
- "Values": [
- "44",
- "100"
- ],
- "HoldFd": true
- },
- {
- "Name": "SchedFeatures",
- "Path": "/sys/kernel/debug/sched_features",
- "Values": [
- "NO_ENERGY_AWARE",
- "ENERGY_AWARE"
- ],
- "ResetOnInit": true
- },
- {
- "Name": "PowerHALMainState",
- "Path": "vendor.powerhal.state",
- "Values": [
- "CAMERA_STREAMING",
- "SUSTAINED_PERFORMANCE",
- ""
- ],
- "Type": "Property"
- },
- {
- "Name": "PowerHALAudioState",
- "Path": "vendor.powerhal.audio",
- "Values": [
- "AUDIO_LOW_LATENCY",
- ""
- ],
- "Type": "Property"
- },
- {
- "Name": "PowerHALRenderingState",
- "Path": "vendor.powerhal.rendering",
- "Values": [
- "EXPENSIVE_RENDERING",
- ""
- ],
- "Type": "Property"
- }
- ],
- "Actions": [
- {
- "PowerHint": "SUSTAINED_PERFORMANCE",
- "Node": "PowerHALMainState",
- "Duration": 0,
- "Value": "SUSTAINED_PERFORMANCE"
- },
- {
- "PowerHint": "SUSTAINED_PERFORMANCE",
- "Node": "CPUBigClusterMaxFreq",
- "Duration": 0,
- "Value": "1401600"
- },
- {
- "PowerHint": "SUSTAINED_PERFORMANCE",
- "Node": "CPUBigPlusClusterMaxFreq",
- "Duration": 0,
- "Value": "1401600"
- },
- {
- "PowerHint": "SUSTAINED_PERFORMANCE",
- "Node": "CPULittleClusterMaxFreq",
- "Duration": 0,
- "Value": "1113600"
- },
- {
- "PowerHint": "SUSTAINED_PERFORMANCE",
- "Node": "GPUMaxFreq",
- "Duration": 0,
- "Value": "379650000"
- },
- {
- "PowerHint": "INTERACTION",
- "Node": "CPUBigPlusClusterMinFreq",
- "Duration": 0,
- "Value": "1286400"
- },
- {
- "PowerHint": "INTERACTION",
- "Node": "CPULittleClusterMinFreq",
- "Duration": 0,
- "Value": "1113600"
- },
- {
- "PowerHint": "INTERACTION",
- "Node": "TASchedtuneBoost",
- "Duration": 0,
- "Value": "50"
- },
- {
- "PowerHint": "INTERACTION",
- "Node": "CPUBWHystTriggerCount",
- "Duration": 0,
- "Value": "0"
- },
- {
- "PowerHint": "INTERACTION",
- "Node": "CPUBWHystLength",
- "Duration": 0,
- "Value": "0"
- },
- {
- "PowerHint": "INTERACTION",
- "Node": "CPUBWHistMemory",
- "Duration": 0,
- "Value": "0"
- },
- {
- "PowerHint": "INTERACTION",
- "Node": "CPUBWMinFreq",
- "Duration": 0,
- "Value": "8132"
- },
- {
- "PowerHint": "INTERACTION",
- "Node": "LLCCBWMinFreq",
- "Duration": 0,
- "Value": "2597"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "SchedFeatures",
- "Duration": 5000,
- "Value": "NO_ENERGY_AWARE"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPUBigClusterMaxFreq",
- "Duration": 5000,
- "Value": "9999999"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPUBigPlusClusterMaxFreq",
- "Duration": 5000,
- "Value": "9999999"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPUBigClusterMinFreq",
- "Duration": 5000,
- "Value": "9999999"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPUBigPlusClusterMinFreq",
- "Duration": 5000,
- "Value": "9999999"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPULittleClusterMinFreq",
- "Duration": 5000,
- "Value": "9999999"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "PMQoSCpuDmaLatency",
- "Duration": 5000,
- "Value": "44"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPUBWHystTriggerCount",
- "Duration": 5000,
- "Value": "0"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPUBWHystLength",
- "Duration": 5000,
- "Value": "0"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPUBWHistMemory",
- "Duration": 5000,
- "Value": "0"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "CPUBWMinFreq",
- "Duration": 5000,
- "Value": "11856"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "GPUForceClkOn",
- "Duration": 5000,
- "Value": "1"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "GPUForceRailOn",
- "Duration": 5000,
- "Value": "1"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "GPUIdleTimer",
- "Duration": 5000,
- "Value": "10000"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "LLCCBWMinFreq",
- "Duration": 5000,
- "Value": "6881"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "L3LittleClusterMinFreq",
- "Duration": 5000,
- "Value": "1440000000"
- },
- {
- "PowerHint": "LAUNCH",
- "Node": "L3BigClusterMinFreq",
- "Duration": 5000,
- "Value": "1440000000"
- },
- {
- "PowerHint": "CAMERA_LAUNCH",
- "Node": "SchedFeatures",
- "Duration": 1000,
- "Value": "NO_ENERGY_AWARE"
- },
- {
- "PowerHint": "CAMERA_LAUNCH",
- "Node": "CPUBigClusterMaxFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_LAUNCH",
- "Node": "CPUBigPlusClusterMaxFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_LAUNCH",
- "Node": "CPUBigClusterMinFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_LAUNCH",
- "Node": "CPUBigPlusClusterMinFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_LAUNCH",
- "Node": "CPULittleClusterMaxFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_LAUNCH",
- "Node": "CPULittleClusterMinFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_LAUNCH",
- "Node": "PMQoSCpuDmaLatency",
- "Duration": 1000,
- "Value": "44"
- },
- {
- "PowerHint": "CAMERA_STREAMING",
- "Node": "PowerHALMainState",
- "Duration": 0,
- "Value": "CAMERA_STREAMING"
- },
- {
- "PowerHint": "CAMERA_STREAMING",
- "Node": "CPUBigClusterMaxFreq",
- "Duration": 0,
- "Value": "2016000"
- },
- {
- "PowerHint": "CAMERA_STREAMING",
- "Node": "CPUBigPlusClusterMaxFreq",
- "Duration": 0,
- "Value": "2016000"
- },
- {
- "PowerHint": "CAMERA_STREAMING",
- "Node": "CPUBWSampleMs",
- "Duration": 0,
- "Value": "10"
- },
- {
- "PowerHint": "CAMERA_STREAMING",
- "Node": "CPUBWIOPercent",
- "Duration": 0,
- "Value": "80"
- },
- {
- "PowerHint": "CAMERA_STREAMING",
- "Node": "LLCCBWSampleMs",
- "Duration": 0,
- "Value": "10"
- },
- {
- "PowerHint": "CAMERA_SHOT",
- "Node": "SchedFeatures",
- "Duration": 1000,
- "Value": "NO_ENERGY_AWARE"
- },
- {
- "PowerHint": "CAMERA_SHOT",
- "Node": "CPUBigClusterMaxFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_SHOT",
- "Node": "CPUBigPlusClusterMaxFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_SHOT",
- "Node": "CPUBigClusterMinFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_SHOT",
- "Node": "CPUBigPlusClusterMinFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_SHOT",
- "Node": "CPULittleClusterMaxFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_SHOT",
- "Node": "CPULittleClusterMinFreq",
- "Duration": 1000,
- "Value": "9999999"
- },
- {
- "PowerHint": "CAMERA_SHOT",
- "Node": "PMQoSCpuDmaLatency",
- "Duration": 1000,
- "Value": "44"
- },
- {
- "PowerHint": "AUDIO_STREAMING",
- "Node": "CPUBigClusterMinFreq",
- "Duration": 2000,
- "Value": "1497600"
- },
- {
- "PowerHint": "AUDIO_STREAMING",
- "Node": "CPUBigPlusClusterMinFreq",
- "Duration": 2000,
- "Value": "1497600"
- },
- {
- "PowerHint": "AUDIO_STREAMING",
- "Node": "PMQoSCpuDmaLatency",
- "Duration": 2000,
- "Value": "44"
- },
- {
- "PowerHint": "AUDIO_LOW_LATENCY",
- "Node": "PowerHALAudioState",
- "Duration": 0,
- "Value": "AUDIO_LOW_LATENCY"
- },
- {
- "PowerHint": "AUDIO_LOW_LATENCY",
- "Node": "PMQoSCpuDmaLatency",
- "Duration": 0,
- "Value": "44"
- },
- {
- "PowerHint": "EXPENSIVE_RENDERING",
- "Node": "PowerHALRenderingState",
- "Duration": 0,
- "Value": "EXPENSIVE_RENDERING"
- },
- {
- "PowerHint": "EXPENSIVE_RENDERING",
- "Node": "GPUMinFreq",
- "Duration": 0,
- "Value": "553850000"
- },
- {
- "PowerHint": "EXPENSIVE_RENDERING",
- "Node": "GPUMaxFreq",
- "Duration": 0,
- "Value": "600000000"
- },
- {
- "PowerHint": "TPU_BOOST",
- "Node": "PMQoSCpuDmaLatency",
- "Duration": 2000,
- "Value": "44"
- }
- ]
-}
diff --git a/powerstats/Android.bp b/powerstats/Android.bp
deleted file mode 100644
index 5c4fac6..0000000
--- a/powerstats/Android.bp
+++ /dev/null
@@ -1,40 +0,0 @@
-//
-// Copyright (C) 2018 The Android Open Source Project
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-cc_binary {
- name: "android.hardware.power.stats@1.0-service.pixel",
- relative_install_path: "hw",
- init_rc: ["android.hardware.power.stats@1.0-service.pixel.rc"],
- srcs: ["service.cpp"],
- cflags: [
- "-Wall",
- "-Werror",
- ],
- static_libs: [
- "libpixelpowerstats",
- ],
- shared_libs: [
- "libbase",
- "libcutils",
- "libhidlbase",
- "libhidltransport",
- "libfmq",
- "liblog",
- "libutils",
- "android.hardware.power.stats@1.0",
- "pixelpowerstats_provider_aidl_interface-cpp",
- "libbinder",
- ],
- vendor: true,
-}
diff --git a/powerstats/android.hardware.power.stats@1.0-service.pixel.rc b/powerstats/android.hardware.power.stats@1.0-service.pixel.rc
deleted file mode 100644
index 6ba83c2..0000000
--- a/powerstats/android.hardware.power.stats@1.0-service.pixel.rc
+++ /dev/null
@@ -1,4 +0,0 @@
-service vendor.power.stats-hal-1-0 /vendor/bin/hw/android.hardware.power.stats@1.0-service.pixel
- class hal
- user system
- group system
diff --git a/powerstats/service.cpp b/powerstats/service.cpp
deleted file mode 100644
index ce45e2c..0000000
--- a/powerstats/service.cpp
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright (C) 2018 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "android.hardware.power.stats@1.0-service.pixel"
-
-#include <android-base/properties.h>
-#include <android/log.h>
-#include <binder/IPCThreadState.h>
-#include <binder/IServiceManager.h>
-#include <binder/ProcessState.h>
-#include <hidl/HidlTransportSupport.h>
-
-#include <pixelpowerstats/AidlStateResidencyDataProvider.h>
-#include <pixelpowerstats/GenericStateResidencyDataProvider.h>
-#include <pixelpowerstats/PowerStats.h>
-#include <pixelpowerstats/WlanStateResidencyDataProvider.h>
-
-using android::OK;
-using android::sp;
-using android::status_t;
-
-// libhwbinder:
-using android::hardware::configureRpcThreadpool;
-using android::hardware::joinRpcThreadpool;
-
-// Generated HIDL files
-using android::hardware::power::stats::V1_0::IPowerStats;
-using android::hardware::power::stats::V1_0::PowerEntityInfo;
-using android::hardware::power::stats::V1_0::PowerEntityStateSpace;
-using android::hardware::power::stats::V1_0::PowerEntityType;
-using android::hardware::power::stats::V1_0::implementation::PowerStats;
-
-// Pixel specific
-using android::hardware::google::pixel::powerstats::AidlStateResidencyDataProvider;
-using android::hardware::google::pixel::powerstats::GenericStateResidencyDataProvider;
-using android::hardware::google::pixel::powerstats::PowerEntityConfig;
-using android::hardware::google::pixel::powerstats::StateResidencyConfig;
-using android::hardware::google::pixel::powerstats::WlanStateResidencyDataProvider;
-
-int main(int /* argc */, char ** /* argv */) {
- ALOGI("power.stats service 1.0 is starting.");
-
- bool isDebuggable = android::base::GetBoolProperty("ro.debuggable", false);
-
- PowerStats *service = new PowerStats();
-
- // Add power entities related to rpmh
- const uint64_t RPM_CLK = 19200; // RPM runs at 19.2Mhz. Divide by 19200 for msec
- std::function<uint64_t(uint64_t)> rpmConvertToMs = [](uint64_t a) { return a / RPM_CLK; };
- std::vector<StateResidencyConfig> rpmStateResidencyConfigs = {
- {.name = "Sleep",
- .entryCountSupported = true,
- .entryCountPrefix = "Sleep Count:",
- .totalTimeSupported = true,
- .totalTimePrefix = "Sleep Accumulated Duration:",
- .totalTimeTransform = rpmConvertToMs,
- .lastEntrySupported = true,
- .lastEntryPrefix = "Sleep Last Entered At:",
- .lastEntryTransform = rpmConvertToMs}};
-
- sp<GenericStateResidencyDataProvider> rpmSdp =
- new GenericStateResidencyDataProvider("/sys/power/rpmh_stats/master_stats");
-
- uint32_t apssId = service->addPowerEntity("APSS", PowerEntityType::SUBSYSTEM);
- rpmSdp->addEntity(apssId, PowerEntityConfig("APSS", rpmStateResidencyConfigs));
-
- uint32_t mpssId = service->addPowerEntity("MPSS", PowerEntityType::SUBSYSTEM);
- rpmSdp->addEntity(mpssId, PowerEntityConfig("MPSS", rpmStateResidencyConfigs));
-
- uint32_t adspId = service->addPowerEntity("ADSP", PowerEntityType::SUBSYSTEM);
- rpmSdp->addEntity(adspId, PowerEntityConfig("ADSP", rpmStateResidencyConfigs));
-
- uint32_t cdspId = service->addPowerEntity("CDSP", PowerEntityType::SUBSYSTEM);
- rpmSdp->addEntity(cdspId, PowerEntityConfig("CDSP", rpmStateResidencyConfigs));
-
- uint32_t slpiId = service->addPowerEntity("SLPI", PowerEntityType::SUBSYSTEM);
- rpmSdp->addEntity(slpiId, PowerEntityConfig("SLPI", rpmStateResidencyConfigs));
-
- service->addStateResidencyDataProvider(std::move(rpmSdp));
-
- // Add SoC power entity
- std::vector<StateResidencyConfig> socStateResidencyConfigs = {
- {.name = "AOSD",
- .header = "RPM Mode:aosd",
- .entryCountSupported = true,
- .entryCountPrefix = "count:",
- .totalTimeSupported = true,
- .totalTimePrefix = "actual last sleep(msec):",
- .lastEntrySupported = false},
- {.name = "CXSD",
- .header = "RPM Mode:cxsd",
- .entryCountSupported = true,
- .entryCountPrefix = "count:",
- .totalTimeSupported = true,
- .totalTimePrefix = "actual last sleep(msec):",
- .lastEntrySupported = false}};
-
- sp<GenericStateResidencyDataProvider> socSdp =
- new GenericStateResidencyDataProvider("/sys/power/system_sleep/stats");
-
- uint32_t socId = service->addPowerEntity("SoC", PowerEntityType::POWER_DOMAIN);
- socSdp->addEntity(socId, PowerEntityConfig(socStateResidencyConfigs));
-
- service->addStateResidencyDataProvider(socSdp);
-
- if (isDebuggable) {
- // Add WLAN power entity
- uint32_t wlanId = service->addPowerEntity("WLAN", PowerEntityType::SUBSYSTEM);
- sp<WlanStateResidencyDataProvider> wlanSdp =
- new WlanStateResidencyDataProvider(wlanId, "/d/wlan0/power_stats");
- service->addStateResidencyDataProvider(wlanSdp);
-
- // Add Easel power entity
- const std::string easelEntryCountPrefix = "Cumulative count:";
- const std::string easelTotalTimePrefix = "Cumulative duration msec:";
- const std::string easelLastEntryPrefix = "Last entry timestamp msec:";
- std::vector<StateResidencyConfig> easelStateResidencyConfigs = {
- {.name = "Off",
- .header = "OFF",
- .entryCountSupported = true,
- .entryCountPrefix = easelEntryCountPrefix,
- .totalTimeSupported = true,
- .totalTimePrefix = easelTotalTimePrefix,
- .lastEntrySupported = true,
- .lastEntryPrefix = easelLastEntryPrefix},
- {.name = "Active",
- .header = "ACTIVE",
- .entryCountSupported = true,
- .entryCountPrefix = easelEntryCountPrefix,
- .totalTimeSupported = true,
- .totalTimePrefix = easelTotalTimePrefix,
- .lastEntrySupported = true,
- .lastEntryPrefix = easelLastEntryPrefix},
- {.name = "Suspend",
- .header = "SUSPEND",
- .entryCountSupported = true,
- .entryCountPrefix = easelEntryCountPrefix,
- .totalTimeSupported = true,
- .totalTimePrefix = easelTotalTimePrefix,
- .lastEntrySupported = true,
- .lastEntryPrefix = easelLastEntryPrefix}};
- sp<GenericStateResidencyDataProvider> easelSdp =
- new GenericStateResidencyDataProvider("/d/mnh_sm/power_stats");
-
- uint32_t easelId = service->addPowerEntity("Easel", PowerEntityType::SUBSYSTEM);
- easelSdp->addEntity(
- easelId, PowerEntityConfig("Easel Subsystem Power Stats", easelStateResidencyConfigs));
-
- service->addStateResidencyDataProvider(easelSdp);
- }
-
- // Add Power Entities that require the Aidl data provider
- sp<AidlStateResidencyDataProvider> aidlSdp = new AidlStateResidencyDataProvider();
- uint32_t citadelId = service->addPowerEntity("Citadel", PowerEntityType::SUBSYSTEM);
- aidlSdp->addEntity(citadelId, "Citadel", {"Last-Reset", "Active", "Deep-Sleep"});
-
- auto serviceStatus = android::defaultServiceManager()->addService(
- android::String16("power.stats-vendor"), aidlSdp);
- if (serviceStatus != android::OK) {
- ALOGE("Unable to register power.stats-vendor service %d", serviceStatus);
- return 1;
- }
- sp<android::ProcessState> ps{android::ProcessState::self()}; // Create non-HW binder threadpool
- ps->startThreadPool();
-
- service->addStateResidencyDataProvider(aidlSdp);
-
- // Configure the threadpool
- configureRpcThreadpool(1, true /*callerWillJoin*/);
-
- status_t status = service->registerAsService();
- if (status != OK) {
- ALOGE("Could not register service for power.stats HAL Iface (%d), exiting.", status);
- return 1;
- }
-
- ALOGI("power.stats service is ready");
- joinRpcThreadpool();
-
- // In normal operation, we don't expect the thread pool to exit
- ALOGE("power.stats service is shutting down");
- return 1;
-}
diff --git a/product.prop b/product.prop
deleted file mode 100644
index 9d1a473..0000000
--- a/product.prop
+++ /dev/null
@@ -1,94 +0,0 @@
-
-persist.rild.nitz_plmn=
-persist.rild.nitz_long_ons_0=
-persist.rild.nitz_long_ons_1=
-persist.rild.nitz_long_ons_2=
-persist.rild.nitz_long_ons_3=
-persist.rild.nitz_short_ons_0=
-persist.rild.nitz_short_ons_1=
-persist.rild.nitz_short_ons_2=
-persist.rild.nitz_short_ons_3=
-DEVICE_PROVISIONED=1
-
-# Set network mode to Global by default and no DSDS/DSDA
-ro.telephony.default_network=10
-
-debug.sf.hw=1
-debug.gralloc.enable_fb_ubwc=1
-
-# system props for the cne module
-persist.vendor.cne.feature=1
-
-# system props for the MM modules
-media.stagefright.enable-player=true
-media.stagefright.enable-http=true
-media.stagefright.enable-aac=true
-media.stagefright.enable-qcp=true
-media.stagefright.enable-scan=true
-mmp.enable.3g2=true
-media.aac_51_output_enabled=true
-mm.enable.smoothstreaming=true
-#13631487 is decimal sum of supported codecs in AAL
-#codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD
-mm.enable.qcom_parser=13631487
-persist.mm.enable.prefetch=true
-
-# Additional buffers shared between Camera and Video
-vidc.enc.dcvs.extra-buff-count=2
-vidc.enc.disable.pq=1
-
-# system props for the data netmgrd
-persist.data.netmgrd.qos.enable=true
-persist.vendor.data.mode=concurrent
-
-# system props for time-services
-persist.timed.enable=true
-
-# system props for perfetto
-persist.traced.enable=1
-persist.heapprofd.enable=1
-
-# System prop to turn on CdmaLTEPhone always
-telephony.lteOnCdmaDevice=1
-
-# Simulate sdcard on /data/media
-persist.fuse_sdcard=true
-
-# settings to enable Device Orientation Sensors
-ro.qti.sensors.dev_ori=true
-
-# settings to disable sensors not needed
-# all secondary wakeup
-ro.qti.sensors.wu=false
-# unused algorithms
-ro.qti.sdk.sensors.gestures=false
-ro.qti.sensors.amd=false
-ro.qti.sensors.cmc=false
-ro.qti.sensors.facing=false
-ro.qti.sensors.pedometer=false
-ro.qti.sensors.rmd=false
-ro.qti.sensors.scrn_ortn=false
-# use SMGR supplied verison
-ro.qti.sensors.step_counter=false
-ro.qti.sensors.step_detector=false
-
-#system prop for RmNet Data
-persist.rmnet.data.enable=true
-persist.data.wda.enable=true
-persist.data.df.dl_mode=5
-persist.data.df.ul_mode=5
-persist.data.df.agg.dl_pkt=10
-persist.data.df.agg.dl_size=4096
-persist.data.df.mux_count=8
-persist.data.df.iwlan_mux=9
-persist.data.df.dev_name=rmnet_usb0
-
-#
-## system props for the data modules
-#
-#ro.use_data_netmgrd=true
-persist.data.netmgrd.qos.enable=true
-persist.data.mode=concurrent
-
-# Disable RescueParty / rescue mode
-persist.sys.disable_rescue=true
diff --git a/recovery.wipe b/recovery.wipe
deleted file mode 100644
index f3b99e0..0000000
--- a/recovery.wipe
+++ /dev/null
@@ -1,12 +0,0 @@
-# All the partitions to be wiped (in order) under recovery.
-/dev/block/bootdevice/by-name/system_a
-/dev/block/bootdevice/by-name/system_b
-/dev/block/bootdevice/by-name/product_a
-/dev/block/bootdevice/by-name/product_b
-/dev/block/bootdevice/by-name/vendor_a
-/dev/block/bootdevice/by-name/vendor_b
-/dev/block/bootdevice/by-name/userdata
-# Wipe the boot partitions last so that all partitions will be wiped
-# correctly even if the wiping process gets interrupted by a force boot.
-/dev/block/bootdevice/by-name/boot_a
-/dev/block/bootdevice/by-name/boot_b
diff --git a/sec_config b/sec_config
deleted file mode 100644
index a33c89b..0000000
--- a/sec_config
+++ /dev/null
@@ -1,330 +0,0 @@
-/* IPC Security Config */
-/* <GPS QMI Service ID - 16>:<GPS QMI Instance ID - all instances>:<Client Group ID> */
-16:4294967295:1000:1021:1026
-/* <QDMA QMI Service ID - 75>:<QDMA QMI Instance ID - all instances>:<Client Group ID> */
-75:4294967295:1000:1001:3006
-/* <LOWI QMI Service ID - 38>:<LOWI QMI Instance ID - all instances>:<Client Group ID> */
-56:4294967295:1021
-/* Allow SS CTL service to be used by system and net_raw processes */
-43:4294967295:1000:3004
-/* <UIMHTTP QMI Service ID - 16>:<UIMHTTP QMI Instance ID - all instances>:<Client Group ID> */
-71:4294967295:1001
-/* <UIMRMT QMI Service ID - 16>:<UIMRMT QMI Instance ID - all instances>:<Client Group ID> */
-50:4294967295:1001
-/* QMI-SLIM service permitted to gps and net_raw */
-55:4294967295:1021
-/* Allow Sensor services to be used by sensor process */
-256:4294967295:1000:1006:1013:1021:1047:3011
-257:4294967295:1000:1006:1013:1021:1047:3011
-258:4294967295:1000:1006:1013:1021:1047:3011
-259:4294967295:1000:1006:1013:1021:1047:3011
-260:4294967295:1000:1006:1013:1021:1047:3011
-261:4294967295:1000:1006:1013:1021:1047:3011
-262:4294967295:1000:1006:1013:1021:1047:3011
-263:4294967295:1000:1006:1013:1021:1047:3011
-264:4294967295:1000:1006:1013:1021:1047:3011
-265:4294967295:1000:1006:1013:1021:1047:3011
-266:4294967295:1000:1006:1013:1021:1047:3011
-267:4294967295:1000:1006:1013:1021:1047:3011
-268:4294967295:1000:1006:1013:1021:1047:3011
-269:4294967295:1000:1006:1013:1021:1047:3011
-270:4294967295:1000:1006:1013:1021:1047:3011
-271:4294967295:1000:1006:1013:1021:1047:3011
-272:4294967295:1000:1006:1013:1021:1047:3011
-273:4294967295:1000:1006:1013:1021:1047:3011
-274:4294967295:1000:1006:1013:1021:1047:3011
-275:4294967295:1000:1006:1013:1021:1047:3011
-276:4294967295:1000:1006:1013:1021:1047:3011
-277:4294967295:1000:1006:1013:1021:1047:3011
-278:4294967295:1000:1006:1013:1021:1047:3011
-279:4294967295:1000:1006:1013:1021:1047:3011
-280:4294967295:1000:1006:1013:1021:1047:3011
-281:4294967295:1000:1006:1013:1021:1047:3011
-282:4294967295:1000:1006:1013:1021:1047:3011
-283:4294967295:1000:1006:1013:1021:1047:3011
-284:4294967295:1000:1006:1013:1021:1047:3011
-285:4294967295:1000:1006:1013:1021:1047:3011
-286:4294967295:1000:1006:1013:1021:1047:3011
-287:4294967295:1000:1006:1013:1021:1047:3011
-288:4294967295:1000:1006:1013:1021:1047:3011
-289:4294967295:1000:1006:1013:1021:1047:3011
-290:4294967295:1000:1006:1013:1021:1047:3011
-291:4294967295:1000:1006:1013:1021:1047:3011
-292:4294967295:1000:1006:1013:1021:1047:3011
-293:4294967295:1000:1006:1013:1021:1047:3011
-294:4294967295:1000:1006:1013:1021:1047:3011
-295:4294967295:1000:1006:1013:1021:1047:3011
-296:4294967295:1000:1006:1013:1021:1047:3011
-297:4294967295:1000:1006:1013:1021:1047:3011
-298:4294967295:1000:1006:1013:1021:1047:3011
-299:4294967295:1000:1006:1013:1021:1047:3011
-300:4294967295:1000:1006:1013:1021:1047:3011
-301:4294967295:1000:1006:1013:1021:1047:3011
-302:4294967295:1000:1006:1013:1021:1047:3011
-303:4294967295:1000:1006:1013:1021:1047:3011
-304:4294967295:1000:1006:1013:1021:1047:3011
-305:4294967295:1000:1006:1013:1021:1047:3011
-306:4294967295:1000:1006:1013:1021:1047:3011
-307:4294967295:1000:1006:1013:1021:1047:3011
-308:4294967295:1000:1006:1013:1021:1047:3011
-309:4294967295:1000:1006:1013:1021:1047:3011
-310:4294967295:1000:1006:1013:1021:1047:3011
-311:4294967295:1000:1006:1013:1021:1047:3011
-312:4294967295:1000:1006:1013:1021:1047:3011
-313:4294967295:1000:1006:1013:1021:1047:3011
-314:4294967295:1000:1006:1013:1021:1047:3011
-315:4294967295:1000:1006:1013:1021:1047:3011
-316:4294967295:1000:1006:1013:1021:1047:3011
-317:4294967295:1000:1006:1013:1021:1047:3011
-318:4294967295:1000:1006:1013:1021:1047:3011
-319:4294967295:1000:1006:1013:1021:1047:3011
-320:4294967295:1000:1006:1013:1021:1047:3011
-321:4294967295:1000:1006:1013:1021:1047:3011
-322:4294967295:1000:1006:1013:1021:1047:3011
-323:4294967295:1000:1006:1013:1021:1047:3011
-324:4294967295:1000:1006:1013:1021:1047:3011
-325:4294967295:1000:1006:1013:1021:1047:3011
-326:4294967295:1000:1006:1013:1021:1047:3011
-327:4294967295:1000:1006:1013:1021:1047:3011
-328:4294967295:1000:1006:1013:1021:1047:3011
-329:4294967295:1000:1006:1013:1021:1047:3011
-330:4294967295:1000:1006:1013:1021:1047:3011
-331:4294967295:1000:1006:1013:1021:1047:3011
-332:4294967295:1000:1006:1013:1021:1047:3011
-333:4294967295:1000:1006:1013:1021:1047:3011
-334:4294967295:1000:1006:1013:1021:1047:3011
-335:4294967295:1000:1006:1013:1021:1047:3011
-336:4294967295:1000:1006:1013:1021:1047:3011
-337:4294967295:1000:1006:1013:1021:1047:3011
-338:4294967295:1000:1006:1013:1021:1047:3011
-339:4294967295:1000:1006:1013:1021:1047:3011
-340:4294967295:1000:1006:1013:1021:1047:3011
-341:4294967295:1000:1006:1013:1021:1047:3011
-342:4294967295:1000:1006:1013:1021:1047:3011
-343:4294967295:1000:1006:1013:1021:1047:3011
-344:4294967295:1000:1006:1013:1021:1047:3011
-345:4294967295:1000:1006:1013:1021:1047:3011
-346:4294967295:1000:1006:1013:1021:1047:3011
-347:4294967295:1000:1006:1013:1021:1047:3011
-348:4294967295:1000:1006:1013:1021:1047:3011
-349:4294967295:1000:1006:1013:1021:1047:3011
-350:4294967295:1000:1006:1013:1021:1047:3011
-351:4294967295:1000:1006:1013:1021:1047:3011
-352:4294967295:1000:1006:1013:1021:1047:3011
-353:4294967295:1000:1006:1013:1021:1047:3011
-354:4294967295:1000:1006:1013:1021:1047:3011
-355:4294967295:1000:1006:1013:1021:1047:3011
-356:4294967295:1000:1006:1013:1021:1047:3011
-357:4294967295:1000:1006:1013:1021:1047:3011
-358:4294967295:1000:1006:1013:1021:1047:3011
-359:4294967295:1000:1006:1013:1021:1047:3011
-360:4294967295:1000:1006:1013:1021:1047:3011
-361:4294967295:1000:1006:1013:1021:1047:3011
-362:4294967295:1000:1006:1013:1021:1047:3011
-363:4294967295:1000:1006:1013:1021:1047:3011
-364:4294967295:1000:1006:1013:1021:1047:3011
-365:4294967295:1000:1006:1013:1021:1047:3011
-366:4294967295:1000:1006:1013:1021:1047:3011
-367:4294967295:1000:1006:1013:1021:1047:3011
-368:4294967295:1000:1006:1013:1021:1047:3011
-369:4294967295:1000:1006:1013:1021:1047:3011
-370:4294967295:1000:1006:1013:1021:1047:3011
-371:4294967295:1000:1006:1013:1021:1047:3011
-372:4294967295:1000:1006:1013:1021:1047:3011
-373:4294967295:1000:1006:1013:1021:1047:3011
-374:4294967295:1000:1006:1013:1021:1047:3011
-375:4294967295:1000:1006:1013:1021:1047:3011
-376:4294967295:1000:1006:1013:1021:1047:3011
-377:4294967295:1000:1006:1013:1021:1047:3011
-378:4294967295:1000:1006:1013:1021:1047:3011
-379:4294967295:1000:1006:1013:1021:1047:3011
-380:4294967295:1000:1006:1013:1021:1047:3011
-381:4294967295:1000:1006:1013:1021:1047:3011
-382:4294967295:1000:1006:1013:1021:1047:3011
-383:4294967295:1000:1006:1013:1021:1047:3011
-384:4294967295:1000:1006:1013:1021:1047:3011
-385:4294967295:1000:1006:1013:1021:1047:3011
-386:4294967295:1000:1006:1013:1021:1047:3011
-387:4294967295:1000:1006:1013:1021:1047:3011
-388:4294967295:1000:1006:1013:1021:1047:3011
-389:4294967295:1000:1006:1013:1021:1047:3011
-390:4294967295:1000:1006:1013:1021:1047:3011
-391:4294967295:1000:1006:1013:1021:1047:3011
-392:4294967295:1000:1006:1013:1021:1047:3011
-393:4294967295:1000:1006:1013:1021:1047:3011
-394:4294967295:1000:1006:1013:1021:1047:3011
-395:4294967295:1000:1006:1013:1021:1047:3011
-396:4294967295:1000:1006:1013:1021:1047:3011
-397:4294967295:1000:1006:1013:1021:1047:3011
-398:4294967295:1000:1006:1013:1021:1047:3011
-399:4294967295:1000:1006:1013:1021:1047:3011
-400:4294967295:1000:1006:1013:1021:1047:3011
-401:4294967295:1000:1006:1013:1021:1047:3011
-402:4294967295:1000:1006:1013:1021:1047:3011
-403:4294967295:1000:1006:1013:1021:1047:3011
-404:4294967295:1000:1006:1013:1021:1047:3011
-405:4294967295:1000:1006:1013:1021:1047:3011
-406:4294967295:1000:1006:1013:1021:1047:3011
-407:4294967295:1000:1006:1013:1021:1047:3011
-408:4294967295:1000:1006:1013:1021:1047:3011
-409:4294967295:1000:1006:1013:1021:1047:3011
-410:4294967295:1000:1006:1013:1021:1047:3011
-411:4294967295:1000:1006:1013:1021:1047:3011
-412:4294967295:1000:1006:1013:1021:1047:3011
-413:4294967295:1000:1006:1013:1021:1047:3011
-414:4294967295:1000:1006:1013:1021:1047:3011
-415:4294967295:1000:1006:1013:1021:1047:3011
-416:4294967295:1000:1006:1013:1021:1047:3011
-417:4294967295:1000:1006:1013:1021:1047:3011
-418:4294967295:1000:1006:1013:1021:1047:3011
-419:4294967295:1000:1006:1013:1021:1047:3011
-420:4294967295:1000:1006:1013:1021:1047:3011
-421:4294967295:1000:1006:1013:1021:1047:3011
-422:4294967295:1000:1006:1013:1021:1047:3011
-423:4294967295:1000:1006:1013:1021:1047:3011
-424:4294967295:1000:1006:1013:1021:1047:3011
-425:4294967295:1000:1006:1013:1021:1047:3011
-426:4294967295:1000:1006:1013:1021:1047:3011
-427:4294967295:1000:1006:1013:1021:1047:3011
-428:4294967295:1000:1006:1013:1021:1047:3011
-429:4294967295:1000:1006:1013:1021:1047:3011
-430:4294967295:1000:1006:1013:1021:1047:3011
-431:4294967295:1000:1006:1013:1021:1047:3011
-432:4294967295:1000:1006:1013:1021:1047:3011
-433:4294967295:1000:1006:1013:1021:1047:3011
-434:4294967295:1000:1006:1013:1021:1047:3011
-435:4294967295:1000:1006:1013:1021:1047:3011
-436:4294967295:1000:1006:1013:1021:1047:3011
-437:4294967295:1000:1006:1013:1021:1047:3011
-438:4294967295:1000:1006:1013:1021:1047:3011
-439:4294967295:1000:1006:1013:1021:1047:3011
-440:4294967295:1000:1006:1013:1021:1047:3011
-441:4294967295:1000:1006:1013:1021:1047:3011
-442:4294967295:1000:1006:1013:1021:1047:3011
-443:4294967295:1000:1006:1013:1021:1047:3011
-444:4294967295:1000:1006:1013:1021:1047:3011
-445:4294967295:1000:1006:1013:1021:1047:3011
-446:4294967295:1000:1006:1013:1021:1047:3011
-447:4294967295:1000:1006:1013:1021:1047:3011
-448:4294967295:1000:1006:1013:1021:1047:3011
-449:4294967295:1000:1006:1013:1021:1047:3011
-450:4294967295:1000:1006:1013:1021:1047:3011
-451:4294967295:1000:1006:1013:1021:1047:3011
-452:4294967295:1000:1006:1013:1021:1047:3011
-453:4294967295:1000:1006:1013:1021:1047:3011
-454:4294967295:1000:1006:1013:1021:1047:3011
-455:4294967295:1000:1006:1013:1021:1047:3011
-456:4294967295:1000:1006:1013:1021:1047:3011
-457:4294967295:1000:1006:1013:1021:1047:3011
-458:4294967295:1000:1006:1013:1021:1047:3011
-459:4294967295:1000:1006:1013:1021:1047:3011
-460:4294967295:1000:1006:1013:1021:1047:3011
-461:4294967295:1000:1006:1013:1021:1047:3011
-462:4294967295:1000:1006:1013:1021:1047:3011
-463:4294967295:1000:1006:1013:1021:1047:3011
-464:4294967295:1000:1006:1013:1021:1047:3011
-465:4294967295:1000:1006:1013:1021:1047:3011
-466:4294967295:1000:1006:1013:1021:1047:3011
-467:4294967295:1000:1006:1013:1021:1047:3011
-468:4294967295:1000:1006:1013:1021:1047:3011
-469:4294967295:1000:1006:1013:1021:1047:3011
-470:4294967295:1000:1006:1013:1021:1047:3011
-471:4294967295:1000:1006:1013:1021:1047:3011
-472:4294967295:1000:1006:1013:1021:1047:3011
-473:4294967295:1000:1006:1013:1021:1047:3011
-474:4294967295:1000:1006:1013:1021:1047:3011
-475:4294967295:1000:1006:1013:1021:1047:3011
-476:4294967295:1000:1006:1013:1021:1047:3011
-477:4294967295:1000:1006:1013:1021:1047:3011
-478:4294967295:1000:1006:1013:1021:1047:3011
-479:4294967295:1000:1006:1013:1021:1047:3011
-480:4294967295:1000:1006:1013:1021:1047:3011
-481:4294967295:1000:1006:1013:1021:1047:3011
-482:4294967295:1000:1006:1013:1021:1047:3011
-483:4294967295:1000:1006:1013:1021:1047:3011
-484:4294967295:1000:1006:1013:1021:1047:3011
-485:4294967295:1000:1006:1013:1021:1047:3011
-486:4294967295:1000:1006:1013:1021:1047:3011
-487:4294967295:1000:1006:1013:1021:1047:3011
-488:4294967295:1000:1006:1013:1021:1047:3011
-489:4294967295:1000:1006:1013:1021:1047:3011
-490:4294967295:1000:1006:1013:1021:1047:3011
-491:4294967295:1000:1006:1013:1021:1047:3011
-492:4294967295:1000:1006:1013:1021:1047:3011
-493:4294967295:1000:1006:1013:1021:1047:3011
-494:4294967295:1000:1006:1013:1021:1047:3011
-495:4294967295:1000:1006:1013:1021:1047:3011
-496:4294967295:1000:1006:1013:1021:1047:3011
-497:4294967295:1000:1006:1013:1021:1047:3011
-498:4294967295:1000:1006:1013:1021:1047:3011
-499:4294967295:1000:1006:1013:1021:1047:3011
-500:4294967295:1000:1006:1013:1021:1047:3011
-501:4294967295:1000:1006:1013:1021:1047:3011
-502:4294967295:1000:1006:1013:1021:1047:3011
-503:4294967295:1000:1006:1013:1021:1047:3011
-504:4294967295:1000:1006:1013:1021:1047:3011
-505:4294967295:1000:1006:1013:1021:1047:3011
-506:4294967295:1000:1006:1013:1021:1047:3011
-507:4294967295:1000:1006:1013:1021:1047:3011
-508:4294967295:1000:1006:1013:1021:1047:3011
-509:4294967295:1000:1006:1013:1021:1047:3011
-510:4294967295:1000:1006:1013:1021:1047:3011
-511:4294967295:1000:1006:1013:1021:1047:3011
-/* Allow RCS service to aquire net_raw permission */
-18:4294967295:1001:3004
-/* Allow RCS service to communicate to IMS QMI Priv Svc*/
-77:4294967295:1001:3003
-/* Allow cnd to accquire netbind */
-18:4294967295:1000:3003
-/* Allow QMID service to aquire net_raw permission */
-3:4294967295:1001:1021:3004
-2:4294967295:1000:1001:3004
-42:4294967295:1001:3004
-18:4294967295:1001:3004
-9:4294967295:1001:3004
-1:4294967295:1001:3004:1000
-4:4294967295:1001:3004
-7:4294967295:1001:3004
-8:4294967295:1001:3004:1000
-68:4294967295:1001:3004
-/* DPM */
-47:4294967295:1001:3004
-/* Allow communication to some QMI services with radio privilages */
-/* Format is <Service id>:<all instances>:<radio> */
-/* PBM */
-12:4294967295:1001
-/* WMS */
-5:4294967295:1001
-/* IMS VT */
-32:4294967295:1001
-/* IMSP */
-31:4294967295:1001
-/* PDC */
-36:4294967295:1001
-/* SAR */
-17:4294967295:1001
-/* RFRPE */
-41:4294967295:1001
-/*UIM*/
-11:4294967295:1001
-/*CAT*/
-10:4294967295:1001
-/*IMSA*/
-33:4294967295:1001
-/* CSVT */
-29:4294967295:1001
-/*SERVREG_NOTIF*/
-64:4294967295:1001
-66:4294967295:1001
-/*LTE*/
-70:4294967295:1001
-/* Allow Data dpmd to access QMI DFS */
-48:4294967295:1000:3004
-/* DIAG */
-4097:4294967295:2002:2950:3009:2901
-/* <WLFW QMI Service ID - 0x45>:<WLFW QMI Instance ID - all instances>:<Client Group ID> */
-69:4294967295:1000
-/* <WLPS QMI Service ID - 0x39>:<WLFW QMI Instance ID - all instances>:<Client Group ID> */
-57:4294967295:1000
-/* <MODEM_SVC QMI Service ID - 235>:<MODEM_SVC QMI Instance ID - all instances>:<Client Group ID> */
-235:4294967295:1000
diff --git a/seccomp_policy/mediacodec.policy b/seccomp_policy/mediacodec.policy
deleted file mode 100644
index 07b7bf7..0000000
--- a/seccomp_policy/mediacodec.policy
+++ /dev/null
@@ -1,9 +0,0 @@
-# device specific syscalls
-pselect6: 1
-eventfd2: 1
-sendto: 1
-recvfrom: 1
-_llseek: 1
-sysinfo: 1
-getcwd: 1
-getdents64: 1
diff --git a/sensors.hals.conf b/sensors.hals.conf
deleted file mode 100644
index 5f3a14b..0000000
--- a/sensors.hals.conf
+++ /dev/null
@@ -1 +0,0 @@
-sensors.ssc.so
diff --git a/thermal-engine/thermal_client.h b/thermal-engine/thermal_client.h
deleted file mode 100644
index b41f139..0000000
--- a/thermal-engine/thermal_client.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of The Linux Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <cutils/properties.h>
-#ifndef __THERMAL_CLIENT_H__
-#define __THERMAL_CLIENT_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define MAX_ACTIONS (32)
-
-/* Enum for supported fields */
-enum supported_fields {
- UNKNOWN_FIELD = 0x0,
- DISABLE_FIELD = 0x1,
- SAMPLING_FIELD = 0x2,
- THRESHOLDS_FIELD = 0x4,
- SET_POINT_FIELD = THRESHOLDS_FIELD,
- THRESHOLDS_CLR_FIELD = 0x8,
- SET_POINT_CLR_FIELD = THRESHOLDS_CLR_FIELD,
- ACTION_INFO_FIELD = 0x10,
- SUPPORTED_FIELD_MAX = 0x20,
-};
-
-enum field_data_type {
- FIELD_INT = 0,
- FIELD_STR,
- FIELD_INT_ARR,
- FIELD_ARR_STR,
- FIELD_ARR_INT_ARR,
- FIELD_MAX
-};
-
-struct action_info_data {
- int info[MAX_ACTIONS];
- uint32_t num_actions;
-};
-
-struct field_data {
- char *field_name;
- enum field_data_type data_type;
- uint32_t num_data;
- void *data;
-};
-
-struct config_instance {
- char *cfg_desc;
- char *algo_type;
- unsigned int fields_mask; /* mask set by client to request to adjust supported fields */
- uint32_t num_fields;
- struct field_data *fields;
-};
-
-int thermal_client_config_query(char *algo_type, struct config_instance **configs);
-void thermal_client_config_cleanup(struct config_instance *configs, unsigned int config_size);
-int thermal_client_config_set(struct config_instance *configs, unsigned int config_size);
-
-int thermal_client_register_callback(char *client_name, int (*callback)(int , void *, void *), void *data);
-int thermal_client_request(char *client_name, int req_data);
-void thermal_client_unregister_callback(int client_cb_handle);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __THERMAL_CLIENT_H__ */
diff --git a/ueventd.rc b/ueventd.rc
deleted file mode 100644
index 7433212..0000000
--- a/ueventd.rc
+++ /dev/null
@@ -1,139 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# The modem image is mounted at /vendor/firmware_mnt
-firmware_directories /vendor/firmware_mnt/image/
-
-# the DIAG device node is not world writable/readable.
-/dev/diag 0660 system diag
-
-/dev/wlan 0666 system system
-/dev/kgsl-3d0 0666 system system
-/dev/ion 0664 system system
-/dev/rtc0 0660 system system
-/dev/smd7 0660 bluetooth bluetooth
-/dev/ipa 0660 system radio
-/dev/wwan_ioctl 0660 system radio
-/dev/ipaNatTable 0660 system radio
-/dev/rmnet_ctrl 0660 usb usb
-/dev/ipa_odl_ctl 0660 radio radio
-/dev/ipa_adpl 0660 system oem_2905
-
-#permissions for CSVT
-/dev/smd11 0660 radio radio
-
-/dev/smdcntl8 0640 radio radio
-/dev/at_usb0 0640 radio radio
-/dev/at_mdm0 0640 radio radio
-
-/dev/video* 0660 system camera
-/dev/media* 0660 system camera
-/dev/v4l-subdev* 0660 system camera
-
-/dev/qseecom 0660 system drmrpc
-/dev/qsee_ipc_irq_spss 0660 system drmrpc
-/dev/seemplog 0660 system system
-/dev/spcom 0660 system system
-/dev/sp_kernel 0660 system system
-/dev/sp_ssr 0660 system system
-/dev/sp_keymaster 0660 system system
-/dev/sec_nvm_* 0660 system system
-
-/dev/jpeg0 0660 system camera
-/dev/adsprpc-smd 0664 system system
-/dev/adsprpc-smd-secure 0644 system system
-
-/dev/hw_random 0600 root root
-/dev/sdsprpc-smd 0660 system system
-
-/dev/wcd-dsp-glink 0660 system audio
-/dev/wcd_dsp0_control 0660 system audio
-/dev/wcd-spi-ac-client 0660 system audio
-/dev/iaxxx-odsp-celldrv 0660 system audio
-/dev/tunnel0 0660 system audio
-
-/dev/msm_qcelp 0660 system audio
-/dev/msm_evrc 0660 system audio
-/dev/msm_wma 0660 system audio
-/dev/msm_wmapro 0660 system audio
-/dev/msm_alac 0660 system audio
-/dev/msm_ape 0660 system audio
-/dev/msm_amrnb 0660 system audio
-/dev/msm_amrwb 0660 system audio
-/dev/msm_amrwbplus 0660 system audio
-/dev/msm_aac 0660 system audio
-/dev/msm_mp3* 0660 system audio
-/dev/msm_multi_aac 0660 system audio
-/dev/msm_aac_in 0660 system audio
-/dev/msm_qcelp_in 0660 system audio
-/dev/msm_evrc_in 0660 system audio
-/dev/msm_amrnb_in 0640 system audio
-/dev/msm_a2dp_in 0660 system audio
-/dev/msm_ac3 0660 system audio
-/dev/msm_audio_cal 0660 system audio
-/dev/msm_hweffects 0660 system audio
-/dev/msm_rtac 0660 system audio
-/dev/msm_cirrus_playback 0660 system audio
-
-/dev/i2c-5 0660 media media
-/dev/avtimer 0660 system audio
-
-/dev/uio0 0660 system system
-/dev/uio1 0660 system system
-
-# SSR devices
-/dev/subsys_* 0640 system system
-
-# Ramdump devices
-/dev/ramdump_* 0640 system system
-
-# Citadel
-/dev/citadel0 0660 hsm hsm
-
-# Storage: for factory reset protection feature
-/dev/block/platform/soc/1d84000.ufshc/by-name/frp 0660 system system
-
-# fuel gauge history
-/dev/maxfg_history 0644 system system
-
-# BT
-/dev/ttyMSM0 0600 bluetooth bluetooth
-/dev/ttyHS0 0660 bluetooth net_bt
-/dev/btpower 0660 bluetooth net_bt
-
-# NFC
-/dev/st21nfc 0660 nfc nfc
-
-#eSE device
-/dev/st54j_se 0660 secure_element secure_element
-
-# Airbrush
-/dev/ab_sm 0600 vendor_airbrush vendor_airbrush
-
-# TPU
-/dev/abc-pcie-tpu_0 0660 system system
-
-# Face Authentication
-/dev/faceauth 0660 system system
-
-# IPU
-/dev/ipu 0666 cameraserver camera
-
-# AB DRAM
-/dev/ab-dram 0666 cameraserver camera
-
-# ABC PCIE DMA
-/dev/abc-pcie-dma 0666 cameraserver camera
diff --git a/utils.mk b/utils.mk
deleted file mode 100644
index 510e263..0000000
--- a/utils.mk
+++ /dev/null
@@ -1,201 +0,0 @@
-# vars for use by utils
-__empty :=
-__space := $(__empty) $(__empty)
-__colon := $(__empty):$(__empty)
-__underscore := $(__empty)_$(__empty)
-
-# $(call match-word,w1,w2)
-# checks if w1 == w2
-# How it works
-# if (w1-w2 not __empty or w2-w1 not __empty) then not_match else match
-#
-# returns true or __empty
-#$(warning :$(1): :$(2): :$(subst $(1),,$(2)):) \
-#$(warning :$(2): :$(1): :$(subst $(2),,$(1)):) \
-#
-define match-word
-$(strip \
- $(if $(or $(subst $(1),$(__empty),$(2)),$(subst $(2),$(__empty),$(1))),,true) \
-)
-endef
-
-# $(call find-word-in-list,w,wlist)
-# finds an exact match of word w in word list wlist
-#
-# How it works
-# fill wlist spaces with __colon
-# wrap w with __colon
-# search word w in list wl, if found match m, return stripped word w
-#
-# returns stripped word or __empty
-define find-word-in-list
-$(strip \
- $(eval wl:= $(__colon)$(subst $(__space),$(__colon),$(strip $(2)))$(__colon)) \
- $(eval w:= $(__colon)$(strip $(1))$(__colon)) \
- $(eval m:= $(findstring $(w),$(wl))) \
- $(if $(m),$(1),) \
-)
-endef
-
-# $(call match-word-in-list,w,wlist)
-# does an exact match of word w in word list wlist
-# How it works
-# if the input word is not __empty
-# return output of an exact match of word w in wordlist wlist
-# else
-# return __empty
-# returns true or __empty
-define match-word-in-list
-$(strip \
- $(if $(strip $(1)), \
- $(call match-word,$(call find-word-in-list,$(1),$(2)),$(strip $(1))), \
- ) \
-)
-endef
-
-# $(call match-prefix,p,delim,w/wlist)
-# matches prefix p in wlist using delimiter delim
-#
-# How it works
-# trim the words in wlist w
-# if find-word-in-list returns not __empty
-# return true
-# else
-# return __empty
-#
-define match-prefix
-$(strip \
- $(eval w := $(strip $(1)$(strip $(2)))) \
- $(eval text := $(patsubst $(w)%,$(1),$(3))) \
- $(if $(call match-word-in-list,$(1),$(text)),true,) \
-)
-endef
-
-# ----
-# The following utilities are meant for board platform specific
-# featurisation
-
-# $(call get-vendor-board-platforms,v)
-# returns list of board platforms for vendor v
-define get-vendor-board-platforms
-$($(1)_BOARD_PLATFORMS)
-endef
-
-# $(call is-board-platform,bp)
-# returns true or __empty
-define is-board-platform
-$(call match-word,$(1),$(TARGET_BOARD_PLATFORM))
-endef
-
-# $(call is-not-board-platform,bp)
-# returns true or __empty
-define is-not-board-platform
-$(if $(call match-word,$(1),$(TARGET_BOARD_PLATFORM)),,true)
-endef
-
-# $(call is-board-platform-in-list,bpl)
-# returns true or __empty
-define is-board-platform-in-list
-$(call match-word-in-list,$(TARGET_BOARD_PLATFORM),$(1))
-endef
-
-# $(call is-vendor-board-platform,vendor)
-# returns true or __empty
-define is-vendor-board-platform
-$(strip \
- $(call match-word-in-list,$(TARGET_BOARD_PLATFORM),\
- $(call get-vendor-board-platforms,$(1)) \
- ) \
-)
-endef
-
-# $(call is-chipset-in-board-platform,chipset)
-# does a prefix match of chipset in TARGET_BOARD_PLATFORM
-# uses underscore as a delimiter
-#
-# returns true or __empty
-define is-chipset-in-board-platform
-$(call match-prefix,$(1),$(__underscore),$(TARGET_BOARD_PLATFORM))
-endef
-
-# $(call is-chipset-prefix-in-board-platform,prefix)
-# does a chipset prefix match in TARGET_BOARD_PLATFORM
-# assumes '_' and 'a' as the delimiter to the chipset prefix
-#
-# How it works
-# if ($(prefix)_ or $(prefix)a match in board platform)
-# return true
-# else
-# return __empty
-#
-define is-chipset-prefix-in-board-platform
-$(strip \
- $(eval delim_a := $(__empty)a$(__empty)) \
- $(if \
- $(or \
- $(call match-prefix,$(1),$(delim_a),$(TARGET_BOARD_PLATFORM)), \
- $(call match-prefix,$(1),$(__underscore),$(TARGET_BOARD_PLATFORM)), \
- ), \
- true, \
- ) \
-)
-endef
-
-#----
-# The following utilities are meant for Android Code Name
-# specific featurisation
-#
-# refer http://source.android.com/source/build-numbers.html
-# for code names and associated sdk versions
-CUPCAKE_SDK_VERSIONS := 3
-DONUT_SDK_VERSIONS := 4
-ECLAIR_SDK_VERSIONS := 5 6 7
-FROYO_SDK_VERSIONS := 8
-GINGERBREAD_SDK_VERSIONS := 9 10
-HONEYCOMB_SDK_VERSIONS := 11 12 13
-ICECREAM_SANDWICH_SDK_VERSIONS := 14 15
-JELLY_BEAN_SDK_VERSIONS := 16 17 18
-
-# $(call is-platform-sdk-version-at-least,version)
-# version is a numeric SDK_VERSION defined above
-define is-platform-sdk-version-at-least
-$(strip \
- $(if $(filter 1,$(shell echo "$$(( $(PLATFORM_SDK_VERSION) >= $(1) ))" )), \
- true, \
- ) \
-)
-endef
-
-# $(call is-android-codename,codename)
-# codename is one of cupcake,donut,eclair,froyo,gingerbread,icecream
-# please refer the $(codename)_SDK_VERSIONS declared above
-define is-android-codename
-$(strip \
- $(if \
- $(call match-word-in-list,$(PLATFORM_SDK_VERSION),$($(1)_SDK_VERSIONS)), \
- true, \
- ) \
-)
-endef
-
-# $(call is-android-codename-in-list,cnlist)
-# cnlist is combination/list of android codenames
-define is-android-codename-in-list
-$(strip \
- $(eval acn := $(__empty)) \
- $(foreach \
- i,$(1),\
- $(eval acn += \
- $(if \
- $(call \
- match-word-in-list,\
- $(PLATFORM_SDK_VERSION),\
- $($(i)_SDK_VERSIONS)\
- ),\
- true,\
- )\
- )\
- ) \
- $(if $(strip $(acn)),true,) \
-)
-endef
diff --git a/wifi_concurrency_cfg.txt b/wifi_concurrency_cfg.txt
deleted file mode 100644
index fa2764c..0000000
--- a/wifi_concurrency_cfg.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-ENABLE_STA_SAP_CONCURRENCY:1
-SAP_INTERFACE_NAME:softap0
-SAP_CHANNEL:6
diff --git a/wpa_supplicant_overlay.conf b/wpa_supplicant_overlay.conf
deleted file mode 100644
index 532638b..0000000
--- a/wpa_supplicant_overlay.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-disable_scan_offload=1
-p2p_disabled=1
-tdls_external_control=1
-wowlan_triggers=magic_pkt
-bss_max_count=512
-interworking=1
-hs20=1
-auto_interworking=0
diff --git a/wpa_supplicant_wcn.conf b/wpa_supplicant_wcn.conf
deleted file mode 100644
index 287954e..0000000
--- a/wpa_supplicant_wcn.conf
+++ /dev/null
@@ -1,830 +0,0 @@
-##### Example wpa_supplicant configuration file ###############################
-#
-# This file describes configuration file format and lists all available option.
-# Please also take a look at simpler configuration examples in 'examples'
-# subdirectory.
-#
-# Empty lines and lines starting with # are ignored
-
-# NOTE! This file may contain password information and should probably be made
-# readable only by root user on multiuser systems.
-
-# Note: All file paths in this configuration file should use full (absolute,
-# not relative to working directory) path in order to allow working directory
-# to be changed. This can happen if wpa_supplicant is run in the background.
-
-# Whether to allow wpa_supplicant to update (overwrite) configuration
-#
-# This option can be used to allow wpa_supplicant to overwrite configuration
-# file whenever configuration is changed (e.g., new network block is added with
-# wpa_cli or wpa_gui, or a password is changed). This is required for
-# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
-# Please note that overwriting configuration file will remove the comments from
-# it.
-update_config=1
-
-# global configuration (shared by all network blocks)
-#
-# Parameters for the control interface. If this is specified, wpa_supplicant
-# will open a control interface that is available for external programs to
-# manage wpa_supplicant. The meaning of this string depends on which control
-# interface mechanism is used. For all cases, the existance of this parameter
-# in configuration is used to determine whether the control interface is
-# enabled.
-#
-# For UNIX domain sockets (default on Linux and BSD): This is a directory that
-# will be created for UNIX domain sockets for listening to requests from
-# external programs (CLI/GUI, etc.) for status information and configuration.
-# The socket file will be named based on the interface name, so multiple
-# wpa_supplicant processes can be run at the same time if more than one
-# interface is used.
-# /var/run/wpa_supplicant is the recommended directory for sockets and by
-# default, wpa_cli will use it when trying to connect with wpa_supplicant.
-#
-# Access control for the control interface can be configured by setting the
-# directory to allow only members of a group to use sockets. This way, it is
-# possible to run wpa_supplicant as root (since it needs to change network
-# configuration and open raw sockets) and still allow GUI/CLI components to be
-# run as non-root users. However, since the control interface can be used to
-# change the network configuration, this access needs to be protected in many
-# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
-# want to allow non-root users to use the control interface, add a new group
-# and change this value to match with that group. Add users that should have
-# control interface access to this group. If this variable is commented out or
-# not included in the configuration file, group will not be changed from the
-# value it got by default when the directory or socket was created.
-#
-# When configuring both the directory and group, use following format:
-# DIR=/var/run/wpa_supplicant GROUP=wheel
-# DIR=/var/run/wpa_supplicant GROUP=0
-# (group can be either group name or gid)
-ctrl_interface=wlan0
-
-# IEEE 802.1X/EAPOL version
-# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
-# EAPOL version 2. However, there are many APs that do not handle the new
-# version number correctly (they seem to drop the frames completely). In order
-# to make wpa_supplicant interoperate with these APs, the version number is set
-# to 1 by default. This configuration value can be used to set it to the new
-# version (2).
-eapol_version=1
-
-# AP scanning/selection
-# By default, wpa_supplicant requests driver to perform AP scanning and then
-# uses the scan results to select a suitable AP. Another alternative is to
-# allow the driver to take care of AP scanning and selection and use
-# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
-# information from the driver.
-# 1: wpa_supplicant initiates scanning and AP selection
-# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
-# parameters (e.g., WPA IE generation); this mode can also be used with
-# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
-# APs (i.e., external program needs to control association). This mode must
-# also be used when using wired Ethernet drivers.
-# 2: like 0, but associate with APs using security policy and SSID (but not
-# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
-# enable operation with hidden SSIDs and optimized roaming; in this mode,
-# the network blocks in the configuration file are tried one by one until
-# the driver reports successful association; each network block should have
-# explicit security policy (i.e., only one option in the lists) for
-# key_mgmt, pairwise, group, proto variables
-ap_scan=1
-
-# EAP fast re-authentication
-# By default, fast re-authentication is enabled for all EAP methods that
-# support it. This variable can be used to disable fast re-authentication.
-# Normally, there is no need to disable this.
-fast_reauth=1
-
-#Disable the default behavior of adding a separate interface for the P2P
-#group when driver support for concurrent interfaces is available.
-p2p_no_group_iface=1
-
-# OpenSSL Engine support
-# These options can be used to load OpenSSL engines.
-# The two engines that are supported currently are shown below:
-# They are both from the opensc project (http://www.opensc.org/)
-# By default no engines are loaded.
-# make the opensc engine available
-#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
-# make the pkcs11 engine available
-#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
-# configure the path to the pkcs11 module required by the pkcs11 engine
-#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
-
-# Dynamic EAP methods
-# If EAP methods were built dynamically as shared object files, they need to be
-# loaded here before being used in the network blocks. By default, EAP methods
-# are included statically in the build, so these lines are not needed
-#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
-#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
-
-# Driver interface parameters
-# This field can be used to configure arbitrary driver interace parameters. The
-# format is specific to the selected driver interface. This field is not used
-# in most cases.
-#driver_param="field=value"
-
-# Country code
-# The ISO/IEC alpha2 country code for the country in which this device is
-# currently operating.
-#country=US
-
-# Maximum lifetime for PMKSA in seconds; default 43200
-#dot11RSNAConfigPMKLifetime=43200
-# Threshold for reauthentication (percentage of PMK lifetime); default 70
-#dot11RSNAConfigPMKReauthThreshold=70
-# Timeout for security association negotiation in seconds; default 60
-#dot11RSNAConfigSATimeout=60
-
-# Wi-Fi Protected Setup (WPS) parameters
-
-# Universally Unique IDentifier (UUID; see RFC 4122) of the device
-# If not configured, UUID will be generated based on the local MAC address.
-#uuid=12345678-9abc-def0-1234-56789abcdef0
-
-# Device Name
-# User-friendly description of device; up to 32 octets encoded in UTF-8
-#device_name=Wireless Client
-
-# Manufacturer
-# The manufacturer of the device (up to 64 ASCII characters)
-#manufacturer=Company
-
-# Model Name
-# Model of the device (up to 32 ASCII characters)
-#model_name=cmodel
-
-# Model Number
-# Additional device description (up to 32 ASCII characters)
-#model_number=123
-
-# Serial Number
-# Serial number of the device (up to 32 characters)
-#serial_number=12345
-
-# Primary Device Type
-# Used format: <categ>-<OUI>-<subcateg>
-# categ = Category as an integer value
-# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
-# default WPS OUI
-# subcateg = OUI-specific Sub Category as an integer value
-# Examples:
-# 1-0050F204-1 (Computer / PC)
-# 1-0050F204-2 (Computer / Server)
-# 5-0050F204-1 (Storage / NAS)
-# 6-0050F204-1 (Network Infrastructure / AP)
-#device_type=1-0050F204-1
-
-# OS Version
-# 4-octet operating system version number (hex string)
-#os_version=01020300
-
-# Credential processing
-# 0 = process received credentials internally (default)
-# 1 = do not process received credentials; just pass them over ctrl_iface to
-# external program(s)
-# 2 = process received credentials internally and pass them over ctrl_iface
-# to external program(s)
-#wps_cred_processing=0
-
-# network block
-#
-# Each network (usually AP's sharing the same SSID) is configured as a separate
-# block in this configuration file. The network blocks are in preference order
-# (the first match is used).
-#
-# network block fields:
-#
-# disabled:
-# 0 = this network can be used (default)
-# 1 = this network block is disabled (can be enabled through ctrl_iface,
-# e.g., with wpa_cli or wpa_gui)
-#
-# id_str: Network identifier string for external scripts. This value is passed
-# to external action script through wpa_cli as WPA_ID_STR environment
-# variable to make it easier to do network specific configuration.
-#
-# ssid: SSID (mandatory); either as an ASCII string with double quotation or
-# as hex string; network name
-#
-# scan_ssid:
-# 0 = do not scan this SSID with specific Probe Request frames (default)
-# 1 = scan with SSID-specific Probe Request frames (this can be used to
-# find APs that do not accept broadcast SSID or use multiple SSIDs;
-# this will add latency to scanning, so enable this only when needed)
-#
-# bssid: BSSID (optional); if set, this network block is used only when
-# associating with the AP using the configured BSSID
-#
-# priority: priority group (integer)
-# By default, all networks will get same priority group (0). If some of the
-# networks are more desirable, this field can be used to change the order in
-# which wpa_supplicant goes through the networks when selecting a BSS. The
-# priority groups will be iterated in decreasing priority (i.e., the larger the
-# priority value, the sooner the network is matched against the scan results).
-# Within each priority group, networks will be selected based on security
-# policy, signal strength, etc.
-# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
-# using this priority to select the order for scanning. Instead, they try the
-# networks in the order that used in the configuration file.
-#
-# mode: IEEE 802.11 operation mode
-# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
-# 1 = IBSS (ad-hoc, peer-to-peer)
-# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
-# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
-# to be set to 2 for IBSS. WPA-None requires following network block options:
-# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
-# both), and psk must also be set.
-#
-# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g.,
-# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial
-# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode.
-# In addition, this value is only used by the station that creates the IBSS. If
-# an IBSS network with the configured SSID is already present, the frequency of
-# the network will be used instead of this configured value.
-#
-# proto: list of accepted protocols
-# WPA = WPA/IEEE 802.11i/D3.0
-# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
-# If not set, this defaults to: WPA RSN
-#
-# key_mgmt: list of accepted authenticated key management protocols
-# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
-# WPA-EAP = WPA using EAP authentication
-# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
-# generated WEP keys
-# NONE = WPA is not used; plaintext or static WEP could be used
-# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms
-# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms
-# If not set, this defaults to: WPA-PSK WPA-EAP
-#
-# auth_alg: list of allowed IEEE 802.11 authentication algorithms
-# OPEN = Open System authentication (required for WPA/WPA2)
-# SHARED = Shared Key authentication (requires static WEP keys)
-# LEAP = LEAP/Network EAP (only used with LEAP)
-# If not set, automatic selection is used (Open System with LEAP enabled if
-# LEAP is allowed as one of the EAP methods).
-#
-# pairwise: list of accepted pairwise (unicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# NONE = Use only Group Keys (deprecated, should not be included if APs support
-# pairwise keys)
-# If not set, this defaults to: CCMP TKIP
-#
-# group: list of accepted group (broadcast/multicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
-# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
-# If not set, this defaults to: CCMP TKIP WEP104 WEP40
-#
-# psk: WPA preshared key; 256-bit pre-shared key
-# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
-# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
-# generated using the passphrase and SSID). ASCII passphrase must be between
-# 8 and 63 characters (inclusive).
-# This field is not needed, if WPA-EAP is used.
-# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
-# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
-# startup and reconfiguration time can be optimized by generating the PSK only
-# only when the passphrase or SSID has actually changed.
-#
-# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
-# Dynamic WEP key required for non-WPA mode
-# bit0 (1): require dynamically generated unicast WEP key
-# bit1 (2): require dynamically generated broadcast WEP key
-# (3 = require both keys; default)
-# Note: When using wired authentication, eapol_flags must be set to 0 for the
-# authentication to be completed successfully.
-#
-# mixed_cell: This option can be used to configure whether so called mixed
-# cells, i.e., networks that use both plaintext and encryption in the same
-# SSID, are allowed when selecting a BSS form scan results.
-# 0 = disabled (default)
-# 1 = enabled
-#
-# proactive_key_caching:
-# Enable/disable opportunistic PMKSA caching for WPA2.
-# 0 = disabled (default)
-# 1 = enabled
-#
-# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
-# hex without quotation, e.g., 0102030405)
-# wep_tx_keyidx: Default WEP key index (TX) (0..3)
-#
-# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
-# allowed. This is only used with RSN/WPA2.
-# 0 = disabled (default)
-# 1 = enabled
-#peerkey=1
-#
-# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to
-# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies.
-#
-# Following fields are only used with internal EAP implementation.
-# eap: space-separated list of accepted EAP methods
-# MD5 = EAP-MD5 (unsecure and does not generate keying material ->
-# cannot be used with WPA; to be used as a Phase 2 method
-# with EAP-PEAP or EAP-TTLS)
-# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# OTP = EAP-OTP (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# GTC = EAP-GTC (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# TLS = EAP-TLS (client and server certificate)
-# PEAP = EAP-PEAP (with tunnelled EAP authentication)
-# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
-# authentication)
-# If not set, all compiled in methods are allowed.
-#
-# identity: Identity string for EAP
-# This field is also used to configure user NAI for
-# EAP-PSK/PAX/SAKE/GPSK.
-# anonymous_identity: Anonymous identity string for EAP (to be used as the
-# unencrypted identity with EAP types that support different tunnelled
-# identity, e.g., EAP-TTLS)
-# password: Password string for EAP. This field can include either the
-# plaintext password (using ASCII or hex string) or a NtPasswordHash
-# (16-byte MD4 hash of password) in hash:<32 hex digits> format.
-# NtPasswordHash can only be used when the password is for MSCHAPv2 or
-# MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP).
-# EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit
-# PSK) is also configured using this field. For EAP-GPSK, this is a
-# variable length PSK.
-# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
-# or more trusted CA certificates. If ca_cert and ca_path are not
-# included, server certificate will not be verified. This is insecure and
-# a trusted CA certificate should always be configured when using
-# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
-# change when wpa_supplicant is run in the background.
-# On Windows, trusted CA certificates can be loaded from the system
-# certificate store by setting this to cert_store://<name>, e.g.,
-# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
-# Note that when running wpa_supplicant as an application, the user
-# certificate store (My user account) is used, whereas computer store
-# (Computer account) is used when running wpasvc as a service.
-# ca_path: Directory path for CA certificate files (PEM). This path may
-# contain multiple CA certificates in OpenSSL format. Common use for this
-# is to point to system trusted CA list which is often installed into
-# directory like /etc/ssl/certs. If configured, these certificates are
-# added to the list of trusted CAs. ca_cert may also be included in that
-# case, but it is not required.
-# client_cert: File path to client certificate file (PEM/DER)
-# Full path should be used since working directory may change when
-# wpa_supplicant is run in the background.
-# Alternatively, a named configuration blob can be used by setting this
-# to blob://<blob name>.
-# private_key: File path to client private key file (PEM/DER/PFX)
-# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
-# commented out. Both the private key and certificate will be read from
-# the PKCS#12 file in this case. Full path should be used since working
-# directory may change when wpa_supplicant is run in the background.
-# Windows certificate store can be used by leaving client_cert out and
-# configuring private_key in one of the following formats:
-# cert://substring_to_match
-# hash://certificate_thumbprint_in_hex
-# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
-# Note that when running wpa_supplicant as an application, the user
-# certificate store (My user account) is used, whereas computer store
-# (Computer account) is used when running wpasvc as a service.
-# Alternatively, a named configuration blob can be used by setting this
-# to blob://<blob name>.
-# private_key_passwd: Password for private key file (if left out, this will be
-# asked through control interface)
-# dh_file: File path to DH/DSA parameters file (in PEM format)
-# This is an optional configuration file for setting parameters for an
-# ephemeral DH key exchange. In most cases, the default RSA
-# authentication does not use this configuration. However, it is possible
-# setup RSA to use ephemeral DH key exchange. In addition, ciphers with
-# DSA keys always use ephemeral DH keys. This can be used to achieve
-# forward secrecy. If the file is in DSA parameters format, it will be
-# automatically converted into DH params.
-# subject_match: Substring to be matched against the subject of the
-# authentication server certificate. If this string is set, the server
-# sertificate is only accepted if it contains this string in the subject.
-# The subject string is in following format:
-# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
-# altsubject_match: Semicolon separated string of entries to be matched against
-# the alternative subject name of the authentication server certificate.
-# If this string is set, the server sertificate is only accepted if it
-# contains one of the entries in an alternative subject name extension.
-# altSubjectName string is in following format: TYPE:VALUE
-# Example: EMAIL:server@example.com
-# Example: DNS:server.example.com;DNS:server2.example.com
-# Following types are supported: EMAIL, DNS, URI
-# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
-# (string with field-value pairs, e.g., "peapver=0" or
-# "peapver=1 peaplabel=1")
-# 'peapver' can be used to force which PEAP version (0 or 1) is used.
-# 'peaplabel=1' can be used to force new label, "client PEAP encryption",
-# to be used during key derivation when PEAPv1 or newer. Most existing
-# PEAPv1 implementation seem to be using the old label, "client EAP
-# encryption", and wpa_supplicant is now using that as the default value.
-# Some servers, e.g., Radiator, may require peaplabel=1 configuration to
-# interoperate with PEAPv1; see eap_testing.txt for more details.
-# 'peap_outer_success=0' can be used to terminate PEAP authentication on
-# tunneled EAP-Success. This is required with some RADIUS servers that
-# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
-# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
-# include_tls_length=1 can be used to force wpa_supplicant to include
-# TLS Message Length field in all TLS messages even if they are not
-# fragmented.
-# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
-# challenges (by default, it accepts 2 or 3)
-# result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use
-# protected result indication.
-# 'crypto_binding' option can be used to control PEAPv0 cryptobinding
-# behavior:
-# * 0 = do not use cryptobinding (default)
-# * 1 = use cryptobinding if server supports it
-# * 2 = require cryptobinding
-# EAP-WSC (WPS) uses following options: pin=<Device Password> or
-# pbc=1.
-# phase2: Phase2 (inner authentication with TLS tunnel) parameters
-# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
-# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
-# Following certificate/private key fields are used in inner Phase2
-# authentication when using EAP-TTLS or EAP-PEAP.
-# ca_cert2: File path to CA certificate file. This file can have one or more
-# trusted CA certificates. If ca_cert2 and ca_path2 are not included,
-# server certificate will not be verified. This is insecure and a trusted
-# CA certificate should always be configured.
-# ca_path2: Directory path for CA certificate files (PEM)
-# client_cert2: File path to client certificate file
-# private_key2: File path to client private key file
-# private_key2_passwd: Password for private key file
-# dh_file2: File path to DH/DSA parameters file (in PEM format)
-# subject_match2: Substring to be matched against the subject of the
-# authentication server certificate.
-# altsubject_match2: Substring to be matched against the alternative subject
-# name of the authentication server certificate.
-#
-# fragment_size: Maximum EAP fragment size in bytes (default 1398).
-# This value limits the fragment size for EAP methods that support
-# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
-# small enough to make the EAP messages fit in MTU of the network
-# interface used for EAPOL. The default value is suitable for most
-# cases.
-#
-# EAP-FAST variables:
-# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
-# to create this file and write updates to it when PAC is being
-# provisioned or refreshed. Full path to the file should be used since
-# working directory may change when wpa_supplicant is run in the
-# background. Alternatively, a named configuration blob can be used by
-# setting this to blob://<blob name>
-# phase1: fast_provisioning option can be used to enable in-line provisioning
-# of EAP-FAST credentials (PAC):
-# 0 = disabled,
-# 1 = allow unauthenticated provisioning,
-# 2 = allow authenticated provisioning,
-# 3 = allow both unauthenticated and authenticated provisioning
-# fast_max_pac_list_len=<num> option can be used to set the maximum
-# number of PAC entries to store in a PAC list (default: 10)
-# fast_pac_format=binary option can be used to select binary format for
-# storing PAC entries in order to save some space (the default
-# text format uses about 2.5 times the size of minimal binary
-# format)
-#
-# wpa_supplicant supports number of "EAP workarounds" to work around
-# interoperability issues with incorrectly behaving authentication servers.
-# These are enabled by default because some of the issues are present in large
-# number of authentication servers. Strict EAP conformance mode can be
-# configured by disabling workarounds with eap_workaround=0.
-
-# Example blocks:
-
-# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
-#network={
-# ssid="simple"
-# psk="very secret passphrase"
-# priority=5
-#}
-#
-## Same as previous, but request SSID-specific scanning (for APs that reject
-## broadcast SSID)
-#network={
-# ssid="second ssid"
-# scan_ssid=1
-# psk="very secret passphrase"
-# priority=2
-#}
-#
-## Only WPA-PSK is used. Any valid cipher combination is accepted.
-#network={
-# ssid="example"
-# proto=WPA
-# key_mgmt=WPA-PSK
-# pairwise=CCMP TKIP
-# group=CCMP TKIP WEP104 WEP40
-# psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-# priority=2
-#}
-#
-## WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying
-#network={
-# ssid="example"
-# proto=WPA
-# key_mgmt=WPA-PSK
-# pairwise=TKIP
-# group=TKIP
-# psk="not so secure passphrase"
-# wpa_ptk_rekey=600
-#}
-#
-## Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
-## or WEP40 as the group cipher will not be accepted.
-#network={
-# ssid="example"
-# proto=RSN
-# key_mgmt=WPA-EAP
-# pairwise=CCMP TKIP
-# group=CCMP TKIP
-# eap=TLS
-# identity="user@example.com"
-# ca_cert="/etc/cert/ca.pem"
-# client_cert="/etc/cert/user.pem"
-# private_key="/etc/cert/user.prv"
-# private_key_passwd="password"
-# priority=1
-#}
-#
-## EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
-## (e.g., Radiator)
-#network={
-# ssid="example"
-# key_mgmt=WPA-EAP
-# eap=PEAP
-# identity="user@example.com"
-# password="foobar"
-# ca_cert="/etc/cert/ca.pem"
-# phase1="peaplabel=1"
-# phase2="auth=MSCHAPV2"
-# priority=10
-#}
-#
-## EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
-## unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
-#network={
-# ssid="example"
-# key_mgmt=WPA-EAP
-# eap=TTLS
-# identity="user@example.com"
-# anonymous_identity="anonymous@example.com"
-# password="foobar"
-# ca_cert="/etc/cert/ca.pem"
-# priority=2
-#}
-#
-## EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
-## use. Real identity is sent only within an encrypted TLS tunnel.
-#network={
-# ssid="example"
-# key_mgmt=WPA-EAP
-# eap=TTLS
-# identity="user@example.com"
-# anonymous_identity="anonymous@example.com"
-# password="foobar"
-# ca_cert="/etc/cert/ca.pem"
-# phase2="auth=MSCHAPV2"
-#}
-#
-## WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
-## authentication.
-#network={
-# ssid="example"
-# key_mgmt=WPA-EAP
-# eap=TTLS
-# # Phase1 / outer authentication
-# anonymous_identity="anonymous@example.com"
-# ca_cert="/etc/cert/ca.pem"
-# # Phase 2 / inner authentication
-# phase2="autheap=TLS"
-# ca_cert2="/etc/cert/ca2.pem"
-# client_cert2="/etc/cer/user.pem"
-# private_key2="/etc/cer/user.prv"
-# private_key2_passwd="password"
-# priority=2
-#}
-#
-## Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
-## group cipher.
-#network={
-# ssid="example"
-# bssid=00:11:22:33:44:55
-# proto=WPA RSN
-# key_mgmt=WPA-PSK WPA-EAP
-# pairwise=CCMP
-# group=CCMP
-# psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-#}
-#
-## Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
-## and all valid ciphers.
-#network={
-# ssid=00010203
-# psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
-#}
-#
-#
-## EAP-SIM with a GSM SIM or USIM
-#network={
-# ssid="eap-sim-test"
-# key_mgmt=WPA-EAP
-# eap=SIM
-# pin="1234"
-# pcsc=""
-#}
-#
-#
-## EAP-PSK
-#network={
-# ssid="eap-psk-test"
-# key_mgmt=WPA-EAP
-# eap=PSK
-# anonymous_identity="eap_psk_user"
-# password=06b4be19da289f475aa46a33cb793029
-# identity="eap_psk_user@example.com"
-#}
-#
-#
-## IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
-## EAP-TLS for authentication and key generation; require both unicast and
-## broadcast WEP keys.
-#network={
-# ssid="1x-test"
-# key_mgmt=IEEE8021X
-# eap=TLS
-# identity="user@example.com"
-# ca_cert="/etc/cert/ca.pem"
-# client_cert="/etc/cert/user.pem"
-# private_key="/etc/cert/user.prv"
-# private_key_passwd="password"
-# eapol_flags=3
-#}
-#
-#
-## LEAP with dynamic WEP keys
-#network={
-# ssid="leap-example"
-# key_mgmt=IEEE8021X
-# eap=LEAP
-# identity="user"
-# password="foobar"
-#}
-#
-## EAP-IKEv2 using shared secrets for both server and peer authentication
-#network={
-# ssid="ikev2-example"
-# key_mgmt=WPA-EAP
-# eap=IKEV2
-# identity="user"
-# password="foobar"
-#}
-#
-## EAP-FAST with WPA (WPA or WPA2)
-#network={
-# ssid="eap-fast-test"
-# key_mgmt=WPA-EAP
-# eap=FAST
-# anonymous_identity="FAST-000102030405"
-# identity="username"
-# password="password"
-# phase1="fast_provisioning=1"
-# pac_file="/etc/wpa_supplicant.eap-fast-pac"
-#}
-#
-#network={
-# ssid="eap-fast-test"
-# key_mgmt=WPA-EAP
-# eap=FAST
-# anonymous_identity="FAST-000102030405"
-# identity="username"
-# password="password"
-# phase1="fast_provisioning=1"
-# pac_file="blob://eap-fast-pac"
-#}
-#
-## Plaintext connection (no WPA, no IEEE 802.1X)
-#network={
-# ssid="plaintext-test"
-# key_mgmt=NONE
-#}
-#
-#
-## Shared WEP key connection (no WPA, no IEEE 802.1X)
-#network={
-# ssid="static-wep-test"
-# key_mgmt=NONE
-# wep_key0="abcde"
-# wep_key1=0102030405
-# wep_key2="1234567890123"
-# wep_tx_keyidx=0
-# priority=5
-#}
-#
-#
-## Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
-## IEEE 802.11 authentication
-#network={
-# ssid="static-wep-test2"
-# key_mgmt=NONE
-# wep_key0="abcde"
-# wep_key1=0102030405
-# wep_key2="1234567890123"
-# wep_tx_keyidx=0
-# priority=5
-# auth_alg=SHARED
-#}
-#
-#
-## IBSS/ad-hoc network with WPA-None/TKIP.
-#network={
-# ssid="test adhoc"
-# mode=1
-# frequency=2412
-# proto=WPA
-# key_mgmt=WPA-NONE
-# pairwise=NONE
-# group=TKIP
-# psk="secret passphrase"
-#}
-#
-#
-## Catch all example that allows more or less all configuration modes
-#network={
-# ssid="example"
-# scan_ssid=1
-# key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
-# pairwise=CCMP TKIP
-# group=CCMP TKIP WEP104 WEP40
-# psk="very secret passphrase"
-# eap=TTLS PEAP TLS
-# identity="user@example.com"
-# password="foobar"
-# ca_cert="/etc/cert/ca.pem"
-# client_cert="/etc/cert/user.pem"
-# private_key="/etc/cert/user.prv"
-# private_key_passwd="password"
-# phase1="peaplabel=0"
-#}
-#
-## Example of EAP-TLS with smartcard (openssl engine)
-#network={
-# ssid="example"
-# key_mgmt=WPA-EAP
-# eap=TLS
-# proto=RSN
-# pairwise=CCMP TKIP
-# group=CCMP TKIP
-# identity="user@example.com"
-# ca_cert="/etc/cert/ca.pem"
-# client_cert="/etc/cert/user.pem"
-#
-# engine=1
-#
-# # The engine configured here must be available. Look at
-# # OpenSSL engine support in the global section.
-# # The key available through the engine must be the private key
-# # matching the client certificate configured above.
-#
-# # use the opensc engine
-# #engine_id="opensc"
-# #key_id="45"
-#
-# # use the pkcs11 engine
-# engine_id="pkcs11"
-# key_id="id_45"
-#
-# # Optional PIN configuration; this can be left out and PIN will be
-# # asked through the control interface
-# pin="1234"
-#}
-#
-## Example configuration showing how to use an inlined blob as a CA certificate
-## data instead of using external file
-#network={
-# ssid="example"
-# key_mgmt=WPA-EAP
-# eap=TTLS
-# identity="user@example.com"
-# anonymous_identity="anonymous@example.com"
-# password="foobar"
-# ca_cert="blob://exampleblob"
-# priority=20
-#}
-#
-#blob-base64-exampleblob={
-#SGVsbG8gV29ybGQhCg==
-#}
-
-
-# Wildcard match for SSID (plaintext APs only). This example select any
-# open AP regardless of its SSID.
-#network={
-# key_mgmt=NONE
-#}