| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2016, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| |
| <!-- Auto-brightness sensor type string --> |
| <string name="config_displayLightSensorType">"com.google.sensor.single_light"</string> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">true</bool> |
| |
| <!-- Indicate whether closing the lid causes the device to go to sleep and opening |
| it causes the device to wake up. |
| The default is false. --> |
| <bool name="config_lidControlsSleep">true</bool> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| <item>"wlan0"</item> |
| <item>"softap.*"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi P2P interfaces. If the device doesn't want to support tethering over Wifi P2p this |
| should be empty. An example would be "p2p-p2p.*" --> |
| <string-array translatable="false" name="config_tether_wifi_p2p_regexs"> |
| <item>"p2p-p2p\\d-.*"</item> |
| </string-array> |
| |
| <!-- Enable doze mode |
| ComponentName of a dream to show whenever the system would otherwise have gone to sleep. --> |
| <string translatable="false" name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> |
| |
| <!-- Type of the ambient tap sensor. Empty if ambient tap is not supported. --> |
| <string name="config_dozeTapSensorType" translatable="false">com.google.sensor.single_touch</string> |
| |
| <!-- MMS user agent string --> |
| <string name="config_mms_user_agent" translatable="false">g1f8f</string> |
| <!-- MMS user agent profile url --> |
| <string name="config_mms_user_agent_profile_url" translatable="false">http://www.gstatic.com/android/sms/G1F8F.xml</string> |
| |
| <!-- Array of desired screen brightness in nits corresponding to the lux values |
| in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and |
| config_screenBrightnessMaximumNits, the display brightness is defined as the measured |
| brightness of an all-white image. |
| |
| If this is defined then: |
| - config_autoBrightnessLcdBacklightValues should not be defined |
| - config_screenBrightnessNits must be defined |
| - config_screenBrightnessBacklight must be defined |
| |
| This array should have size one greater than the size of the config_autoBrightnessLevels |
| array. The brightness values must be non-negative and non-decreasing. This must be |
| overridden in platform specific overlays --> |
| <array name="config_autoBrightnessDisplayValuesNits"> |
| <item>5.139055</item> <!-- 0 - 1 --> |
| <item>9.962018965</item> <!-- 1 - 2 --> |
| <item>18.34822964</item> <!-- 2 - 3 --> |
| <item>21.55068128</item> <!-- 3 - 4 --> |
| <item>24.0167788</item> <!-- 4 - 8 --> |
| <item>30.62162162</item> <!-- 8 - 12 --> |
| <item>35.09486396</item> <!-- 12 - 20 --> |
| <item>41.2249643</item> <!-- 20 - 33 --> |
| <item>47.6760716</item> <!-- 33 - 55 --> |
| <item>55.73002427</item> <!-- 55 - 90 --> |
| <item>66.24126116</item> <!-- 90 - 148 --> |
| <item>79.67614115</item> <!-- 148 - 245 --> |
| <item>98.04727274</item> <!-- 245 - 403 --> |
| <item>125.1221991</item> <!-- 403 - 665 --> |
| <item>161.6875093</item> <!-- 665 - 1097 --> |
| <item>208.4885553</item> <!-- 1097 - 1808 --> |
| <item>264.8221315</item> <!-- 1808 - 2981 --> |
| <item>327.8974352</item> <!-- 2981 - 5000 --> |
| <item>401.1676739</item> <!-- 5000 - 10000 --> |
| <item>600.0</item> <!-- 10000+ --> |
| </array> |
| |
| <!-- Minimum screen brightness allowed by the power manager. --> |
| <integer name="config_screenBrightnessDim">6</integer> |
| |
| <!-- Screen brightness when dozing. --> |
| <integer name="config_screenBrightnessDoze">34</integer> |
| |
| <!-- Whether the always on display mode is available. --> |
| <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool> |
| |
| <!-- Disable AOD by default --> |
| <bool name="config_dozeAlwaysOnEnabled">false</bool> |
| |
| <!-- True if the display hardware only has brightness buckets rather than a full range of |
| backlight values --> |
| <bool name="config_displayBrightnessBucketsInDoze">true</bool> |
| |
| <!-- Default screen brightness for VR setting. Target default value: 0x0BB for EVT1.1. --> |
| <!-- 8 bit brightness level of 6 corresponds to the 10 bit brightness level of 0x0B6, |
| 8 bit brightness level of 7 corresponds to the 10 bit brightness level of 0x0C1 on EVT1.1. --> |
| <integer name="config_screenBrightnessForVrSettingDefault">7</integer> |
| <integer name="config_screenBrightnessForVrSettingMinimum">6</integer> |
| <integer name="config_screenBrightnessForVrSettingMaximum">7</integer> |
| |
| <!-- Minimum screen brightness setting allowed by power manager. |
| The user is forbidden from setting the brightness below this level. --> |
| <item name="config_screenBrightnessSettingMinimumFloat" format="float" type="dimen">0.0</item> |
| |
| <!-- Maximum screen brightness allowed by the power manager. |
| The user is forbidden from setting the brightness above this level. --> |
| <item name="config_screenBrightnessSettingMaximumFloat" format="float" type="dimen">1.0</item> |
| |
| <!-- Default screen brightness setting |
| Must be in the range specified by minimum and maximum. --> |
| <item name="config_screenBrightnessSettingDefaultFloat" format="float" type="dimen">0.29019607843</item> |
| |
| <!-- An array describing the screen's backlight values corresponding to the brightness |
| values in the config_screenBrightnessNits array. |
| |
| This array should be equal in size to config_screenBrightnessBacklight. --> |
| <integer-array name="config_screenBrightnessBacklight"> |
| <item>1</item> |
| <item>255</item> |
| </integer-array> |
| |
| <!-- An array of floats describing the screen brightness in nits corresponding to the backlight |
| values in the config_screenBrightnessBacklight array. On OLED displays these values |
| should be measured with an all white image while the display is in the fully on state. |
| Note that this value should *not* reflect the maximum brightness value for any high |
| brightness modes but only the maximum brightness value obtainable in a sustainable manner. |
| |
| This array should be equal in size to config_screenBrightnessBacklight --> |
| <array name="config_screenBrightnessNits"> |
| <item>2.0</item> |
| <item>500.0</item> |
| </array> |
| |
| <!-- The nominal white coordinates, in CIE1931 XYZ color space, for Display White Balance to |
| use in its calculations. AWB will adapt this white point to the target ambient white |
| point. The array must include a total of 3 float values (X, Y, Z) --> |
| <string-array name="config_displayWhiteBalanceDisplayNominalWhite"> |
| <!-- Nominal White X --> <item>0.950352</item> |
| <!-- Nominal White Y --> <item>1.0 </item> |
| <!-- Nominal White Z --> <item>1.089366</item> |
| </string-array> |
| |
| <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. --> |
| <integer name="config_shutdownBatteryTemperature">600</integer> |
| |
| <!-- Whether or not we should show the option to show battery percentage --> |
| <bool name="config_battery_percentage_setting_available">true</bool> |
| |
| <!-- Whether or not wcg mode should be enabled on this device --> |
| <bool name="config_enableWcgMode">true</bool> |
| |
| <!-- Whether the display cutout region of the main built-in display should be forced to |
| black in software (to avoid aliasing or emulate a cutout that is not physically existent). |
| --> |
| <bool name="config_fillMainBuiltInDisplayCutout">true</bool> |
| |
| <!-- An array of device capabilities defined by GSMA SGP.22 v2.2.2, and their corresponding major |
| version. --> |
| <string-array translatable="false" name="config_telephonyEuiccDeviceCapabilities"> |
| <item>"gsm,9"</item> |
| <item>"utran,9"</item> |
| <item>"cdma1x,1"</item> |
| <item>"hrpd,3"</item> |
| <item>"ehrpd,12"</item> |
| <item>"eutran,15"</item> |
| <item>"nrepc,15"</item> |
| <item>"nr5gc,15"</item> |
| <item>"eutran5gc,15"</item> |
| </string-array> |
| |
| <!-- Display cutout configuration --> |
| <string translatable="false" name="config_mainBuiltInDisplayCutout"> |
| M 41.5,73 a 32,32 0 1 0 64,0 a 32,32 0 1 0 -64,0 Z |
| @left |
| </string> |
| |
| <string translatable="false" name="config_mainBuiltInDisplayCutoutRectApproximation"> |
| M 0.0,0.0 |
| h 121 |
| v 121 |
| h -121 |
| Z |
| @left |
| </string> |
| |
| <!-- Radius of the software rounded corners. --> |
| <dimen name="rounded_corner_radius">108px</dimen> |
| |
| <!-- Height of the status bar in portrait. The height should be |
| Max((status bar content height + waterfall top size), top cutout size) --> |
| <dimen name="status_bar_height_portrait">145px</dimen> |
| <dimen name="status_bar_height_landscape">28dp</dimen> |
| <!-- Height of area above QQS where battery/time go (equal to status bar) --> |
| <dimen name="quick_qs_offset_height">145px</dimen> |
| |
| <!-- Enable CBRS support --> |
| <bool translatable="false" name="config_cbrs_supported">true</bool> |
| </resources> |