| # |
| # Copyright (C) 2021 The Android Open-Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| PRODUCT_RELEASE_CONFIG_MAPS += vendor/google_devices/release/phones/release_config_map.mk |
| |
| TARGET_KERNEL_DIR ?= device/google/akita-kernel |
| TARGET_BOARD_KERNEL_HEADERS := device/google/akita-kernel/kernel-headers |
| |
| ifdef RELEASE_GOOGLE_AKITA_KERNEL_VERSION |
| TARGET_LINUX_KERNEL_VERSION := $(RELEASE_GOOGLE_AKITA_KERNEL_VERSION) |
| endif |
| |
| ifdef RELEASE_GOOGLE_AKITA_KERNEL_DIR |
| TARGET_KERNEL_DIR := $(RELEASE_GOOGLE_AKITA_KERNEL_DIR) |
| TARGET_BOARD_KERNEL_HEADERS := $(RELEASE_GOOGLE_AKITA_KERNEL_DIR)/kernel-headers |
| endif |
| |
| $(call inherit-product-if-exists, vendor/google_devices/akita/prebuilts/device-vendor-akita.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/zuma/prebuilts/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/zuma/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/akita/proprietary/akita/device-vendor-akita.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/akita/proprietary/device-vendor.mk) |
| $(call inherit-product-if-exists, vendor/google_devices/akita/proprietary/WallpapersAkita.mk) |
| |
| DEVICE_PACKAGE_OVERLAYS += device/google/akita/akita/overlay |
| |
| include device/google/akita/audio/akita/audio-tables.mk |
| include device/google/zuma/device-shipping-common.mk |
| include hardware/google/pixel/vibrator/cs40l26/device.mk |
| include device/google/gs-common/bcmbt/bluetooth.mk |
| include device/google/gs-common/touch/gti/gti.mk |
| include device/google/gs-common/modem/radio_ext/radio_ext.mk |
| |
| # go/lyric-soong-variables |
| $(call soong_config_set,lyric,camera_hardware,akita) |
| $(call soong_config_set,lyric,tuning_product,akita) |
| $(call soong_config_set,google3a_config,target_device,akita) |
| |
| # Init files |
| PRODUCT_COPY_FILES += \ |
| device/google/akita/conf/init.akita.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.akita.rc |
| |
| # Recovery files |
| PRODUCT_COPY_FILES += \ |
| device/google/akita/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.akita.rc |
| |
| # Display |
| PRODUCT_COPY_FILES += \ |
| device/google/akita/akita/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \ |
| device/google/akita/akita/display_golden_google-ak3b_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_google-ak3b_cal0.pb \ |
| device/google/akita/display_golden_external_display_cal2.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_external_display_cal2.pb |
| |
| # Display brightness curve |
| PRODUCT_COPY_FILES += \ |
| device/google/akita/akita/panel_config_google-ak3b_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-ak3b_cal0.pb |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.primarydisplay.op.hs_hz=120 \ |
| vendor.primarydisplay.op.ns_hz=60 \ |
| vendor.primarydisplay.op.peak_refresh_rate=60 |
| |
| # lhbm peak brightness delay: decided by kernel |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=0 |
| |
| PRODUCT_SOONG_NAMESPACES += device/google/akita/radio/coex |
| |
| # Coex Configs |
| PRODUCT_PACKAGES += \ |
| display_primary_mipi_coex_table \ |
| display_primary_ssc_coex_table |
| |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.camera.adjust_backend_min_freq_for_1p_front_video_1080p_30fps=1 \ |
| persist.vendor.camera.adjust_backend_min_freq_for_video_120fps=1 \ |
| persist.vendor.camera.adjust_cam_uclamp_min_for_1p_rear_video_60fps=1 \ |
| persist.vendor.camera.extended_launch_boost=1 \ |
| persist.vendor.camera.optimized_tnr_freq=1 \ |
| vendor.camera.debug.enable_software_post_sharpen_node=false \ |
| vendor.camera.allow_sensor_binning_aspect_ratio_to_override_itp_output=false \ |
| vendor.camera.debug.enable_blending_node=false |
| |
| # Enable front camera always binning for 720P or smaller resolution |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.front_720P_always_binning=true |
| |
| # Enable camera exif model/make reporting |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.exif_reveal_make_model=true |
| |
| # Media Performance Class 13 |
| PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33 |
| |
| # NFC |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \ |
| frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \ |
| frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \ |
| device/google/akita/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \ |
| device/google/akita/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf |
| |
| PRODUCT_PACKAGES += \ |
| $(RELEASE_PACKAGE_NFC_STACK) \ |
| Tag \ |
| android.hardware.nfc-service.st \ |
| NfcOverlayAkita |
| |
| # SecureElement |
| PRODUCT_PACKAGES += \ |
| android.hardware.secure_element-service.thales |
| |
| PRODUCT_COPY_FILES += \ |
| frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \ |
| frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \ |
| device/google/akita/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf |
| |
| # Thermal Config |
| PRODUCT_COPY_FILES += \ |
| device/google/akita/thermal_info_config_akita.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \ |
| device/google/akita/thermal_info_config_charge_akita.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json \ |
| device/google/akita/thermal_info_config_proto.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_proto.json \ |
| device/google/akita/thermal_info_config_charge_proto.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge_proto.json |
| |
| # Power HAL config |
| PRODUCT_COPY_FILES += \ |
| device/google/akita/powerhint-akita.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json |
| |
| # Bluetooth HAL |
| PRODUCT_COPY_FILES += \ |
| device/google/akita/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.bluetooth.a2dp_offload.supported=true \ |
| persist.bluetooth.a2dp_offload.disabled=false \ |
| persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac |
| |
| # Bluetooth Tx power caps |
| PRODUCT_COPY_FILES += \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G6GPR_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G6GPR_CA.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G6GPR_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G6GPR_EU.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G6GPR_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G6GPR_US.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G8HHN_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G8HHN_EU.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G8HHN_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G8HHN_US.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G576D_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G576D_CA.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G576D_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G576D_EU.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G576D_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G576D_JP.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_G576D_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G576D_US.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_GKV4X_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GKV4X_CA.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_GKV4X_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GKV4X_EU.csv \ |
| device/google/akita/bluetooth/bluetooth_power_limits_AK3_GKV4X_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GKV4X_US.csv |
| |
| # POF |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.finder.supported=true |
| |
| # DCK properties based on target |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| ro.gms.dck.eligible_wcc=2 \ |
| ro.gms.dck.se_capability=1 |
| |
| # Bluetooth hci_inject test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| hci_inject |
| |
| # Bluetooth SAR test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| sar_test |
| |
| # Bluetooth EWP test tool |
| PRODUCT_PACKAGES_DEBUG += \ |
| ewp_tool |
| |
| # Bluetooth AAC VBR |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.a2dp_aac.vbr_supported=true |
| |
| # Bluetooth Super Wide Band |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.hfp.swb.supported=true |
| |
| # Bluetooth LE Audio |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.leaudio_switcher.supported=true \ |
| bluetooth.profile.bap.unicast.client.enabled=true \ |
| bluetooth.profile.csip.set_coordinator.enabled=true \ |
| bluetooth.profile.hap.client.enabled=true \ |
| bluetooth.profile.mcp.server.enabled=true \ |
| bluetooth.profile.ccp.server.enabled=true \ |
| bluetooth.profile.vcp.controller.enabled=true |
| |
| # Bluetooth LE Audio enable hardware offloading |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.leaudio_offload.supported=true \ |
| persist.bluetooth.leaudio_offload.disabled=false |
| |
| # Include Bluetooth soong namespace |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/akita/bluetooth |
| |
| # Bluetooth LE Auido offload capabilities setting |
| PRODUCT_PACKAGES += \ |
| le_audio_codec_capabilities.xml |
| |
| # LE Audio Lunch Config for Phase 1 (LE audio toggle hidden by default) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.leaudio.toggle_visible=false |
| |
| # LE Audio use classic connection by default |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.bluetooth.leaudio.le_audio_connection_by_default=false |
| |
| # Bluetooth LE Audio CIS handover to SCO |
| # Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in b/242908683. |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.leaudio.notify.idle.during.call=true |
| |
| # Bluetooth LE Audio enable dual mic SWB call |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| bluetooth.leaudio.dual_bidirection_swb.supported=true |
| |
| # LE Audio Unicast Allowlist |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.leaudio.allow_list=SM-R510 |
| |
| # Enable one-handed mode |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.support_one_handed_mode=true |
| |
| # Override BQR mask to enable LE Audio Choppy report, remove BTRT logging |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.bqr.event_mask=295006 \ |
| persist.bluetooth.bqr.vnd_quality_mask=29 \ |
| persist.bluetooth.bqr.vnd_trace_mask=0 \ |
| persist.bluetooth.vendor.btsnoop=true |
| else |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| persist.bluetooth.bqr.event_mask=295006 \ |
| persist.bluetooth.bqr.vnd_quality_mask=16 \ |
| persist.bluetooth.bqr.vnd_trace_mask=0 \ |
| persist.bluetooth.vendor.btsnoop=false |
| endif |
| |
| # Spatial Audio |
| PRODUCT_PACKAGES += \ |
| libspatialaudio \ |
| librondo |
| |
| # Sound Dose |
| PRODUCT_PACKAGES += \ |
| android.hardware.audio.sounddose-vendor-impl \ |
| audio_sounddose_aoc \ |
| |
| # Audio CCA property |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| persist.vendor.audio.cca.enabled=false |
| |
| # Settings Overlay |
| PRODUCT_PACKAGES += \ |
| SettingsAkitaOverlay |
| |
| # Keymaster HAL |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # Gatekeeper HAL |
| #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software |
| |
| |
| # Gatekeeper |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.gatekeeper@1.0-service.software |
| |
| # Keymint replaces Keymaster |
| # PRODUCT_PACKAGES += \ |
| # android.hardware.security.keymint-service |
| |
| # Keymaster |
| #PRODUCT_PACKAGES += \ |
| # android.hardware.keymaster@4.0-impl \ |
| # android.hardware.keymaster@4.0-service |
| |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote |
| #PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service |
| #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service |
| |
| # PRODUCT_PROPERTY_OVERRIDES += \ |
| # ro.hardware.keystore_desede=true \ |
| # ro.hardware.keystore=software \ |
| # ro.hardware.gatekeeper=software |
| |
| # PowerStats HAL |
| PRODUCT_SOONG_NAMESPACES += \ |
| device/google/akita/powerstats/akita |
| |
| # WiFi Overlay |
| PRODUCT_PACKAGES += \ |
| WifiOverlay2024Mid |
| |
| # Trusty liboemcrypto.so |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/akita/prebuilts |
| ifneq (,$(filter AP1%,$(RELEASE_PLATFORM_VERSION))) |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/akita/prebuilts/trusty/24Q1 |
| else ifneq (,$(filter AP2% AP3%,$(RELEASE_PLATFORM_VERSION))) |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/akita/prebuilts/trusty/24Q2 |
| else |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/akita/prebuilts/trusty/trunk |
| endif |
| |
| # include GNSSD |
| include device/google/akita/location/gnssd/device-gnss.mk |
| |
| # Set zram size |
| PRODUCT_VENDOR_PROPERTIES += \ |
| vendor.zram.size=50p \ |
| persist.device_config.configuration.disable_rescue_party=true |
| |
| # Increase thread priority for nodes stop |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.increase_thread_priority_nodes_stop=true |
| |
| # Fingerprint HAL |
| GOODIX_CONFIG_BUILD_VERSION := g7_trusty |
| ifneq (,$(filter AP1%,$(RELEASE_PLATFORM_VERSION))) |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/akita/prebuilts/firmware/fingerprint/24Q1 |
| else ifneq (,$(filter AP2% AP3%,$(RELEASE_PLATFORM_VERSION))) |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/akita/prebuilts/firmware/fingerprint/24Q2 |
| else |
| PRODUCT_SOONG_NAMESPACES += vendor/google_devices/akita/prebuilts/firmware/fingerprint/trunk |
| endif |
| $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_common.mk) |
| ifeq ($(filter factory%, $(TARGET_PRODUCT)),) |
| $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_shipping.mk) |
| else |
| $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_factory.mk) |
| endif |
| |
| # Display |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1 |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms=1000 |
| |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.udfps.als_feed_forward_supported=true \ |
| persist.vendor.udfps.lhbm_controlled_in_hal_supported=true |
| |
| # Fingerprint exposure compensation |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.udfps.auto_exposure_compensation_supported=true |
| |
| # Fingerprint Auth Filter |
| ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.udfps.auth_filter.log_all_coverages=true \ |
| persist.vendor.udfps.auth_filter.data_collection_enabled=false |
| endif |
| |
| # OIS with system imu |
| PRODUCT_VENDOR_PROPERTIES += \ |
| persist.vendor.camera.ois_with_system_imu=true |
| |
| # Vibrator HAL |
| ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1 |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.vibrator.hal.supported_primitives=243 \ |
| ro.vendor.vibrator.hal.f0.comp.enabled=1 \ |
| ro.vendor.vibrator.hal.redc.comp.enabled=0 \ |
| persist.vendor.vibrator.hal.context.enable=false \ |
| persist.vendor.vibrator.hal.context.scale=40 \ |
| persist.vendor.vibrator.hal.context.fade=true \ |
| persist.vendor.vibrator.hal.context.cooldowntime=1600 \ |
| persist.vendor.vibrator.hal.context.settlingtime=5000 |
| |
| # Increment the SVN for any official public releases |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.vendor.build.svn=7 |
| |
| # Keyboard height ratio and bottom padding in dp for portrait mode |
| PRODUCT_PRODUCT_PROPERTIES += \ |
| ro.com.google.ime.kb_pad_port_b=4.19 \ |
| ro.com.google.ime.height_ratio=1.1 |
| |
| # Enable DeviceAsWebcam support |
| PRODUCT_VENDOR_PROPERTIES += \ |
| ro.usb.uvc.enabled=true |
| |
| # Window Extensions |
| $(call inherit-product, $(SRC_TARGET_DIR)/product/window_extensions.mk) |
| |
| # Disable Settings large-screen optimization enabled by Window Extensions |
| PRODUCT_SYSTEM_PROPERTIES += \ |
| persist.settings.large_screen_opt.enabled=false |
