| ASHIELD Board, v2.2 |
| 3/25/2011 |
| |
| Route board out on 0-mil perimeter in top silk. |
| |
| Standard .062" FR4, 1oz Cu, RoHS, HASL |
| |
| Board is 2 layers, plus unusual silk screen (see notes below) |
| |
| !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
| NOTE: VENDOR MARK AND TEST STAMP SHOULD BE PLACED WITHIN JOY1 RECTANGLE. |
| MARK AND STAMP MUST NOT BE VISIBLE ONCE BOARD IS ASSEMBLED. |
| !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
| |
| Other Notes: |
| |
| Board is WHITE SMOBC |
| |
| ashield_blk.plc BLACK primary (first applied) silk, component side |
| This is a base silk. Colored silks go on top of this one. |
| |
| ashield_blk.pls BLACK silk for bottom (solder) side of board |
| |
| ashield.drl Drill rack |
| ashield.drd Excellon drill file |
| |
| ashield.cmp Component side copper |
| ashield.stc Component side stop mask |
| |
| ashield.sol Solder side copper |
| ashield.sts Solder side stop mask |
| |
| All components on TOP side of board, EXCEPT for 6 single-row in-line headers |
| on left and right edges. There is 1 6-pin header and 5 8-pin headers. These |
| mount from the bottom, and are soldered from the top. |
| |
| Through-hole leads should be trimmed flush. |
| |