| /** | |
| * \file | |
| * | |
| * \brief USB configuration file | |
| * | |
| * Copyright (C) 2009 Atmel Corporation. All rights reserved. | |
| * | |
| * \page License | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. The name of Atmel may not be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * 4. This software may only be redistributed and used in connection with an | |
| * Atmel AVR product. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH | |
| * DAMAGE. | |
| */ | |
| #ifndef _CONF_USB_H_ | |
| #define _CONF_USB_H_ | |
| #include "compiler.h" | |
| /** | |
| * USB Device Configuration | |
| * @{ | |
| */ | |
| //! Device definition (mandatory) | |
| #define USB_DEVICE_VENDOR_ID USB_VID_ATMEL | |
| #define USB_DEVICE_PRODUCT_ID USB_PID_ATMEL_AVR_PHDC | |
| #define USB_DEVICE_MAJOR_VERSION 1 | |
| #define USB_DEVICE_MINOR_VERSION 0 | |
| #define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA) | |
| #define USB_DEVICE_ATTR \ | |
| (USB_CONFIG_ATTR_SELF_POWERED) | |
| // (USB_CONFIG_ATTR_BUS_POWERED) | |
| // (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED) | |
| // (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED) | |
| //! USB Device string definitions (Optional) | |
| #define USB_DEVICE_MANUFACTURE_NAME "ATMEL AVR" | |
| #define USB_DEVICE_PRODUCT_NAME "PHDC" | |
| // #define USB_DEVICE_SERIAL_NAME "12...EF" | |
| /** | |
| * Device speeds support | |
| * Low speed is not authorized | |
| * @{ | |
| */ | |
| //! To authorize the High speed | |
| #if (UC3A3||UC3A4) | |
| //#define USB_DEVICE_HS_SUPPORT | |
| #endif | |
| //@} | |
| /** | |
| * USB Device Callbacks definitions (Optional) | |
| * @{ | |
| */ | |
| #define UDC_VBUS_EVENT(b_vbus_high) main_vbus_action(b_vbus_high) | |
| #define UDC_SOF_EVENT() main_sof_action() | |
| #define UDC_SUSPEND_EVENT() main_suspend_action() | |
| #define UDC_RESUME_EVENT() main_resume_action() | |
| //! Mandatory when USB_DEVICE_ATTR authorizes remote wakeup feature | |
| // #define UDC_REMOTEWAKEUP_ENABLE() user_callback_remotewakeup_enable() | |
| // #define UDC_REMOTEWAKEUP_DISABLE() user_callback_remotewakeup_disable() | |
| //! When a extra string descriptor must be supported | |
| //! other than manufacturer, product and serial string | |
| // #define UDC_GET_EXTRA_STRING() | |
| //@} | |
| //@} | |
| /** | |
| * USB Interface Configuration | |
| * @{ | |
| */ | |
| /** | |
| * Configuration of PHDC interface | |
| * @{ | |
| */ | |
| //! Interface callback definition | |
| #define UDI_PHDC_ENABLE_EXT() main_phdc_enable() | |
| #define UDI_PHDC_DISABLE_EXT() main_phdc_disable() | |
| //! Select data format of application | |
| //! USB_PHDC_DATAMSG_FORMAT_VENDOR or USB_PHDC_DATAMSG_FORMAT_11073_20601 | |
| #define UDI_PHDC_DATAMSG_FORMAT USB_PHDC_DATAMSG_FORMAT_11073_20601 | |
| //! If USB_PHDC_DATAMSG_FORMAT_11073_20601 then define specialization(s) | |
| #define UDI_PHDC_SPECIALIZATION {0x2345} // Define in 11073_20601 | |
| //! Defines the QOS need for each transfer direction | |
| #define UDI_PHDC_QOS_OUT \ | |
| (USB_PHDC_QOS_MEDIUM_BETTER|USB_PHDC_QOS_HIGH_BEST) | |
| #define UDI_PHDC_QOS_IN \ | |
| (USB_PHDC_QOS_LOW_GOOD|USB_PHDC_QOS_MEDIUM_BETTER|USB_PHDC_QOS_MEDIUM_BEST) | |
| //! The following METADATAs can be send during USB enumeration | |
| //! for each endpoints (optional). | |
| //! It can define the Opaque data format of each endpoints | |
| //! These must be upto 253 and recomanded <30 | |
| #define UDI_PHDC_METADATA_DESC_BULK_IN {0x01,0x02,0x03} | |
| #define UDI_PHDC_METADATA_DESC_BULK_OUT {0x01,0x02,0x03} | |
| #define UDI_PHDC_METADATA_DESC_INT_IN {0x01,0x02,0x03} | |
| //@} | |
| //@} | |
| /** | |
| * USB Device Driver Configuration | |
| * @{ | |
| */ | |
| //@} | |
| //! The includes of classes and other headers must be done at the end of this file to avoid compile error | |
| #include "udi_phdc_conf.h" | |
| #include "main.h" | |
| #endif // _CONF_USB_H_ |