/** | |
* \file | |
* | |
* \brief User Interface | |
* | |
* Copyright (C) 2009 Atmel Corporation. All rights reserved. | |
* | |
* \page License | |
* | |
* Redistribution and use in source and binary forms, with or without | |
* modification, are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* | |
* 3. The name of Atmel may not be used to endorse or promote products derived | |
* from this software without specific prior written permission. | |
* | |
* 4. This software may only be redistributed and used in connection with an | |
* Atmel AVR product. | |
* | |
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH | |
* DAMAGE. | |
*/ | |
#include "compiler.h" | |
#include "conf_usb.h" | |
#include "udi_hid_mouse.h" | |
#include "board.h" | |
#include "gpio.h" | |
#include "sysclk.h" | |
#include "cycle_counter.h" | |
#include "ui.h" | |
#define MOUSE_MOVE_RANGE 3 | |
#define TIMER_UI 100 | |
static t_cpu_time ui_timer; | |
static uint8_t state_mouse = 0; | |
void ui_init(void) | |
{ | |
LED_On(LED0); | |
LED_Off(LED1); | |
cpu_set_timeout(cpu_ms_2_cy(TIMER_UI, sysclk_get_cpu_hz()), &ui_timer); | |
state_mouse = 0; | |
} | |
void ui_powerdown(void) | |
{ | |
LED_Off(LED0); | |
LED_Off(LED1); | |
} | |
void ui_wakeup_enable(void) | |
{ | |
} | |
void ui_wakeup_disable(void) | |
{ | |
} | |
void ui_wakeup(void) | |
{ | |
LED_On(LED0); | |
} | |
void ui_process(uint16_t framenumber) | |
{ | |
bool b_btn_state; | |
static bool btn_left_last_state = HID_MOUSE_BTN_UP; | |
static bool btn_right_last_state = HID_MOUSE_BTN_UP; | |
static bool btn_middle_last_state = HID_MOUSE_BTN_UP; | |
static uint8_t cpt_sof = 0; | |
if ((framenumber % 1000) == 0) { | |
LED_On(LED1); | |
} | |
if ((framenumber % 1000) == 500) { | |
LED_Off(LED1); | |
} | |
// Scan process running each 2ms | |
cpt_sof++; | |
if (2 > cpt_sof) | |
return; | |
cpt_sof = 0; | |
// Scan buttons on switch 0 (left), 1 (middle), 2 (right) | |
//b_btn_state = (!gpio_get_pin_value(GPIO_PUSH_BUTTON_0))? HID_MOUSE_BTN_DOWN : HID_MOUSE_BTN_UP; | |
b_btn_state = HID_MOUSE_BTN_RELEASED; | |
if (b_btn_state != btn_left_last_state) { | |
udi_hid_mouse_btnleft(b_btn_state); | |
btn_left_last_state = b_btn_state; | |
} | |
//b_btn_state = (!gpio_get_pin_value(GPIO_PUSH_BUTTON_1))? HID_MOUSE_BTN_DOWN : HID_MOUSE_BTN_UP; | |
b_btn_state = HID_MOUSE_BTN_RELEASED; | |
if (b_btn_state != btn_middle_last_state) { | |
udi_hid_mouse_btnmiddle(b_btn_state); | |
btn_middle_last_state = b_btn_state; | |
} | |
//b_btn_state = (!gpio_get_pin_value(GPIO_PUSH_BUTTON_2))? HID_MOUSE_BTN_DOWN : HID_MOUSE_BTN_UP; | |
b_btn_state = HID_MOUSE_BTN_RELEASED; | |
if (b_btn_state != btn_right_last_state) { | |
udi_hid_mouse_btnright(b_btn_state); | |
btn_right_last_state = b_btn_state; | |
} | |
// Scan move on switch 4 (right), 5 (left), 6 (down), 7 (up) | |
if (state_mouse == 0) | |
udi_hid_mouse_moveX(MOUSE_MOVE_RANGE); | |
else if (state_mouse == 2) | |
udi_hid_mouse_moveX(-MOUSE_MOVE_RANGE); | |
else if (state_mouse == 1) | |
udi_hid_mouse_moveY(-MOUSE_MOVE_RANGE); | |
else if (state_mouse == 3) | |
udi_hid_mouse_moveY(MOUSE_MOVE_RANGE); | |
if (cpu_is_timeout(&ui_timer)) { | |
cpu_set_timeout(cpu_ms_2_cy(TIMER_UI, sysclk_get_cpu_hz()), | |
&ui_timer); | |
state_mouse = (state_mouse + 1) % 4; | |
} | |
} |