| /* ---------------------------------------------------------------------------- | |
| * ATMEL Microcontroller Software Support | |
| * ---------------------------------------------------------------------------- | |
| * Copyright (c) 2009, Atmel Corporation | |
| * | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * - Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the disclaimer below. | |
| * | |
| * Atmel's name may not be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR | |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, | |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, | |
| * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, | |
| * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| /** | |
| * \page sam3x_ek_board/board_desc SAM3X-EK - Board Description | |
| * | |
| * \section Purpose | |
| * | |
| * This file is dedicated to description of the SAM3X-EK board. | |
| * | |
| * \section Contents | |
| * | |
| * - For SAM3X-EK information, see \subpage sam3x_ek_board/board_info. | |
| * - For operating frequency information, see \subpage sam3x_ek_opfreq. | |
| * - For using portable PIO definitions, see \subpage sam3x_ek_piodef. | |
| * - For on-board memories, see \subpage sam3x_ek_mem. | |
| * - Several USB definitions are included here, see \subpage sam3x_ek_usb. | |
| * - For External components, see \subpage sam3x_ek_extcomp. | |
| * - For Individual chip definition, see \subpage sam3x_ek_chipdef. | |
| * | |
| * To get more software details and the full list of parameters related to the | |
| * SAM3X-EK board configuration, please have a look at the source file: | |
| * \ref board.h\n | |
| * | |
| * \section Usage | |
| * | |
| * - The code for booting the board is provided by board/board_cstartup_xxx.c and | |
| * board/board_lowlevel.c. | |
| * - For using board PIOs, board characteristics (clock, etc.) and external | |
| * components, see board.h. | |
| * - For manipulating memories, see board/board_memories.h. | |
| * | |
| * This file can be used as a template and modified to fit a custom board, with | |
| * specific PIOs usage or memory connections. | |
| */ | |
| /** | |
| * \file board.h | |
| * | |
| * Definition of SAM3X-EK characteristics, sam3x-dependant PIOs and | |
| * external components interfacing. | |
| */ | |
| #ifndef _BOARD_ | |
| #define _BOARD_ | |
| /*---------------------------------------------------------------------------- | |
| * Headers | |
| *----------------------------------------------------------------------------*/ | |
| #include "chip.h" | |
| #include "include/ads7843.h" | |
| #include "include/bitbanding.h" | |
| #include "include/bmp.h" | |
| #include "include/board_lowlevel.h" | |
| #include "include/board_memories.h" | |
| #include "include/dmad.h" | |
| #include "include/dma_hardware_interface.h" | |
| #include "include/spid_dma.h" | |
| #include "include/usart_spi.h" | |
| #include "include/at45d.h" | |
| #include "include/at45_spi.h" | |
| #include "include/hamming.h" | |
| #include "include/hx8347.h" | |
| #include "include/iso7816_4.h" | |
| #include "include/lcdd.h" | |
| #include "include/lcd_color.h" | |
| #include "include/lcd_font.h" | |
| #include "include/lcd_font10x14.h" | |
| #include "include/lcd_gimp_image.h" | |
| #include "include/led.h" | |
| #include "include/emacd.h" | |
| #include "include/macb.h" | |
| #include "include/math.h" | |
| #include "include/mii.h" | |
| #include "include/sn65hvd234.h" // CAN Transceiver | |
| #include "include/timetick.h" | |
| #include "include/tsd.h" | |
| #include "include/tsd_ads7843.h" | |
| #include "include/tsd_com.h" | |
| #include "include/uart_console.h" | |
| #include "include/wav.h" | |
| #include "include/xmodem.h" | |
| #include "include/twid.h" | |
| #include "include/wm8731.h" | |
| /** | |
| * Libc porting layers | |
| */ | |
| #if defined ( __CC_ARM ) /* Keil µVision 4 */ | |
| # include "include/rand.h" | |
| #elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */ | |
| # include "include/rand.h" | |
| #elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68/2010q1-188 */ | |
| # include "include/syscalls.h" /** RedHat Newlib minimal stub */ | |
| #endif | |
| /*---------------------------------------------------------------------------- | |
| * Definitions | |
| *----------------------------------------------------------------------------*/ | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page sam3x_ek_board/board_info "SAM3X-EK - Board informations" | |
| * This page lists several definition related to the board description. | |
| * | |
| * \section Definitions | |
| * - \ref BOARD_NAME | |
| */ | |
| /** Name of the board */ | |
| #define BOARD_NAME "SAM3X-EK" | |
| /** Board definition */ | |
| #define sam3xek | |
| /** Family definition (already defined) */ | |
| #define sam3x | |
| /** Core definition */ | |
| #define cortexm3 | |
| //#define BOARD_REV_A | |
| #define BOARD_REV_B | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page sam3x_ek_opfreq "SAM3X-EK - Operating frequencies" | |
| * This page lists several definition related to the board operating frequency | |
| * (when using the initialization done by board/board_lowlevel.c). | |
| * | |
| * \section Definitions | |
| * - \ref BOARD_MAINOSC | |
| * - \ref BOARD_MCK | |
| */ | |
| /** Frequency of the board main oscillator */ | |
| #define BOARD_MAINOSC 12000000 | |
| /** Master clock frequency (when using board/board_lowlevel.c) */ | |
| #define BOARD_MCK 84000000 | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page sam3x_ek_piodef "SAM3X-EK - PIO definitions" | |
| * This pages lists all the pio definitions contained in board.h. The constants | |
| * are named using the following convention: PIN_* for a constant which defines | |
| * a single Pin instance (but may include several PIOs sharing the same | |
| * controller), and PINS_* for a list of Pin instances. | |
| * | |
| */ | |
| #include "board/board_adc.h" | |
| #include "board/board_ebi.h" | |
| #include "board/board_leds.h" | |
| #include "board/board_buttons.h" | |
| #include "board/board_pwm.h" | |
| #include "board/board_spi.h" | |
| #include "board/board_ssc.h" | |
| #include "board/board_pck.h" | |
| #include "board/board_mci.h" | |
| #include "board/board_uart.h" | |
| #include "board/board_usart0.h" | |
| #include "board/board_usart1.h" | |
| #include "board/board_usart3.h" | |
| #include "board/board_usb.h" | |
| #include "board/board_can.h" | |
| #include "board/board_qtouch.h" | |
| #include "board/board_twi.h" | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page sam3x_ek_extcomp "SAM3X-EK - External components" | |
| * This page lists the definitions related to external on-board components | |
| * located in the board.h file for the SAM3X-EK. | |
| * | |
| */ | |
| #include "board/board_lcd.h" | |
| #include "board/board_touchscreen.h" | |
| #include "board/board_emac.h" | |
| #include "board/board_sdcard.h" | |
| #include "board/board_smartcard.h" | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page sam3x_ek_mem "SAM3X-EK - Memories" | |
| * This page lists definitions related to internal & external on-board memories. | |
| * | |
| * | |
| */ | |
| #include "board/board_nandflash.h" | |
| #include "board/board_sdram.h" | |
| #include "board/board_norflash.h" | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page sam3x_ek_chipdef "SAM3X-EK - Individual chip definition" | |
| * This page lists the definitions related to different chip's definition | |
| * located in the board.h file for the SAM3X-EK. | |
| * | |
| * \section USART | |
| * - \ref BOARD_PIN_USART_RXD | |
| * - \ref BOARD_PIN_USART_TXD | |
| * - \ref BOARD_PIN_USART_CTS | |
| * - \ref BOARD_PIN_USART_RTS | |
| * - \ref BOARD_PIN_USART_EN | |
| * - \ref BOARD_USART_BASE | |
| * - \ref BOARD_ID_USART | |
| */ | |
| /** Rtc */ | |
| #define BOARD_RTC_ID ID_RTC | |
| /** TWI ID for EEPROM application to use */ | |
| #define BOARD_ID_TWI_EEPROM ID_TWI0 | |
| /** TWI ID for SLAVE application to use */ | |
| #define BOARD_ID_TWI_SLAVE ID_TWI0 | |
| /** TWI Base for TWI EEPROM application to use */ | |
| #define BOARD_BASE_TWI_EEPROM TWI0 | |
| /** TWI Base for TWI SLAVE application to use */ | |
| #define BOARD_BASE_TWI_SLAVE TWI0 | |
| /** TWI pins for EEPROM application to use */ | |
| #define BOARD_PINS_TWI_EEPROM PINS_TWI0 | |
| /** TWI pins for TWI SLAVE application to use */ | |
| #define BOARD_PINS_TWI_SLAVE PINS_TWI0 | |
| /** USART RX pin for application */ | |
| #define BOARD_PIN_USART_RXD PIN_USART0_RXD | |
| /** USART TX pin for application */ | |
| #define BOARD_PIN_USART_TXD PIN_USART0_TXD | |
| /** USART CTS pin for application */ | |
| #define BOARD_PIN_USART_CTS PIN_USART0_CTS | |
| /** USART RTS pin for application */ | |
| #define BOARD_PIN_USART_RTS PIN_USART0_RTS | |
| /** USART ENABLE pin for application */ | |
| #define BOARD_PIN_USART_EN PIN_USART0_EN | |
| /** USART Base for application */ | |
| #define BOARD_USART_BASE USART0 | |
| /** USART ID for application */ | |
| #define BOARD_ID_USART ID_USART0 | |
| /** USART1 Base for application */ | |
| #define BOARD_USART1_BASE USART1 | |
| /** USART1 ID for application */ | |
| #define BOARD_ID_USART1 ID_USART1 | |
| /** USART3 Base for application */ | |
| #define BOARD_USART3_BASE USART3 | |
| /** USART3 ID for application */ | |
| #define BOARD_ID_USART3 ID_USART3 | |
| #endif /* #ifndef _BOARD_ */ | |