blob: 1a745b5887acce5fd995c9bcbfde4832aca6c6af [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* Filename: userial_vendor.c
*
* Description: Contains vendor-specific userial functions
*
******************************************************************************/
#define LOG_TAG "bt_userial_vendor"
#include <utils/Log.h>
#include <termios.h>
#include <fcntl.h>
#include <errno.h>
#include <stdio.h>
#include "bt_vendor_brcm.h"
#include "userial.h"
#include "userial_vendor.h"
/******************************************************************************
** Constants & Macros
******************************************************************************/
#ifndef VNDUSERIAL_DBG
#define VNDUSERIAL_DBG FALSE
#endif
#if (VNDUSERIAL_DBG == TRUE)
#define VNDUSERIALDBG(param, ...) {ALOGD(param, ## __VA_ARGS__);}
#else
#define VNDUSERIALDBG(param, ...) {}
#endif
#define VND_PORT_NAME_MAXLEN 256
/******************************************************************************
** Local type definitions
******************************************************************************/
/* vendor serial control block */
typedef struct
{
int fd; /* fd to Bluetooth device */
struct termios termios; /* serial terminal of BT port */
char port_name[VND_PORT_NAME_MAXLEN];
} vnd_userial_cb_t;
/******************************************************************************
** Static variables
******************************************************************************/
static vnd_userial_cb_t vnd_userial;
/*****************************************************************************
** Helper Functions
*****************************************************************************/
/*******************************************************************************
**
** Function userial_to_tcio_baud
**
** Description helper function converts USERIAL baud rates into TCIO
** conforming baud rates
**
** Returns TRUE/FALSE
**
*******************************************************************************/
uint8_t userial_to_tcio_baud(uint8_t cfg_baud, uint32_t *baud)
{
if (cfg_baud == USERIAL_BAUD_115200)
*baud = B115200;
else if (cfg_baud == USERIAL_BAUD_4M)
*baud = B4000000;
else if (cfg_baud == USERIAL_BAUD_3M)
*baud = B3000000;
else if (cfg_baud == USERIAL_BAUD_2M)
*baud = B2000000;
else if (cfg_baud == USERIAL_BAUD_1M)
*baud = B1000000;
else if (cfg_baud == USERIAL_BAUD_921600)
*baud = B921600;
else if (cfg_baud == USERIAL_BAUD_460800)
*baud = B460800;
else if (cfg_baud == USERIAL_BAUD_230400)
*baud = B230400;
else if (cfg_baud == USERIAL_BAUD_57600)
*baud = B57600;
else if (cfg_baud == USERIAL_BAUD_19200)
*baud = B19200;
else if (cfg_baud == USERIAL_BAUD_9600)
*baud = B9600;
else if (cfg_baud == USERIAL_BAUD_1200)
*baud = B1200;
else if (cfg_baud == USERIAL_BAUD_600)
*baud = B600;
else
{
ALOGE( "userial vendor open: unsupported baud idx %i", cfg_baud);
*baud = B115200;
return FALSE;
}
return TRUE;
}
#if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
/*******************************************************************************
**
** Function userial_ioctl_init_bt_wake
**
** Description helper function to set the open state of the bt_wake if ioctl
** is used. it should not hurt in the rfkill case but it might
** be better to compile it out.
**
** Returns none
**
*******************************************************************************/
void userial_ioctl_init_bt_wake(int fd)
{
uint32_t bt_wake_state;
/* assert BT_WAKE through ioctl */
ioctl(fd, USERIAL_IOCTL_BT_WAKE_ASSERT, NULL);
ioctl(fd, USERIAL_IOCTL_BT_WAKE_GET_ST, &bt_wake_state);
VNDUSERIALDBG("userial_ioctl_init_bt_wake read back BT_WAKE state=%i", \
bt_wake_state);
}
#endif // (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
/*****************************************************************************
** Userial Vendor API Functions
*****************************************************************************/
/*******************************************************************************
**
** Function userial_vendor_init
**
** Description Initialize userial vendor-specific control block
**
** Returns None
**
*******************************************************************************/
void userial_vendor_init(void)
{
vnd_userial.fd = -1;
snprintf(vnd_userial.port_name, VND_PORT_NAME_MAXLEN, "%s", \
BLUETOOTH_UART_DEVICE_PORT);
}
/*******************************************************************************
**
** Function userial_vendor_open
**
** Description Open the serial port with the given configuration
**
** Returns device fd
**
*******************************************************************************/
int userial_vendor_open(tUSERIAL_CFG *p_cfg)
{
uint32_t baud;
uint8_t data_bits;
uint16_t parity;
uint8_t stop_bits;
vnd_userial.fd = -1;
if (!userial_to_tcio_baud(p_cfg->baud, &baud))
{
return -1;
}
if(p_cfg->fmt & USERIAL_DATABITS_8)
data_bits = CS8;
else if(p_cfg->fmt & USERIAL_DATABITS_7)
data_bits = CS7;
else if(p_cfg->fmt & USERIAL_DATABITS_6)
data_bits = CS6;
else if(p_cfg->fmt & USERIAL_DATABITS_5)
data_bits = CS5;
else
{
ALOGE("userial vendor open: unsupported data bits");
return -1;
}
if(p_cfg->fmt & USERIAL_PARITY_NONE)
parity = 0;
else if(p_cfg->fmt & USERIAL_PARITY_EVEN)
parity = PARENB;
else if(p_cfg->fmt & USERIAL_PARITY_ODD)
parity = (PARENB | PARODD);
else
{
ALOGE("userial vendor open: unsupported parity bit mode");
return -1;
}
if(p_cfg->fmt & USERIAL_STOPBITS_1)
stop_bits = 0;
else if(p_cfg->fmt & USERIAL_STOPBITS_2)
stop_bits = CSTOPB;
else
{
ALOGE("userial vendor open: unsupported stop bits");
return -1;
}
ALOGI("userial vendor open: opening %s", vnd_userial.port_name);
if ((vnd_userial.fd = open(vnd_userial.port_name, O_RDWR)) == -1)
{
ALOGE("userial vendor open: unable to open %s", vnd_userial.port_name);
return -1;
}
tcflush(vnd_userial.fd, TCIOFLUSH);
tcgetattr(vnd_userial.fd, &vnd_userial.termios);
cfmakeraw(&vnd_userial.termios);
vnd_userial.termios.c_cflag |= (CRTSCTS | stop_bits);
tcsetattr(vnd_userial.fd, TCSANOW, &vnd_userial.termios);
tcflush(vnd_userial.fd, TCIOFLUSH);
tcsetattr(vnd_userial.fd, TCSANOW, &vnd_userial.termios);
tcflush(vnd_userial.fd, TCIOFLUSH);
tcflush(vnd_userial.fd, TCIOFLUSH);
/* set input/output baudrate */
cfsetospeed(&vnd_userial.termios, baud);
cfsetispeed(&vnd_userial.termios, baud);
tcsetattr(vnd_userial.fd, TCSANOW, &vnd_userial.termios);
#if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
userial_ioctl_init_bt_wake(vnd_userial.fd);
#endif
ALOGI("device fd = %d open", vnd_userial.fd);
return vnd_userial.fd;
}
/*******************************************************************************
**
** Function userial_vendor_close
**
** Description Conduct vendor-specific close work
**
** Returns None
**
*******************************************************************************/
void userial_vendor_close(void)
{
int result;
if (vnd_userial.fd == -1)
return;
#if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
/* de-assert bt_wake BEFORE closing port */
ioctl(vnd_userial.fd, USERIAL_IOCTL_BT_WAKE_DEASSERT, NULL);
#endif
ALOGI("device fd = %d close", vnd_userial.fd);
if ((result = close(vnd_userial.fd)) < 0)
ALOGE( "close(fd:%d) FAILED result:%d", vnd_userial.fd, result);
vnd_userial.fd = -1;
}
/*******************************************************************************
**
** Function userial_vendor_set_baud
**
** Description Set new baud rate
**
** Returns None
**
*******************************************************************************/
void userial_vendor_set_baud(uint8_t userial_baud)
{
uint32_t tcio_baud;
userial_to_tcio_baud(userial_baud, &tcio_baud);
cfsetospeed(&vnd_userial.termios, tcio_baud);
cfsetispeed(&vnd_userial.termios, tcio_baud);
tcsetattr(vnd_userial.fd, TCSANOW, &vnd_userial.termios);
}
/*******************************************************************************
**
** Function userial_vendor_ioctl
**
** Description ioctl inteface
**
** Returns None
**
*******************************************************************************/
void userial_vendor_ioctl(userial_vendor_ioctl_op_t op, void *p_data)
{
switch(op)
{
#if (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
case USERIAL_OP_ASSERT_BT_WAKE:
VNDUSERIALDBG("## userial_vendor_ioctl: Asserting BT_Wake ##");
ioctl(vnd_userial.fd, USERIAL_IOCTL_BT_WAKE_ASSERT, NULL);
break;
case USERIAL_OP_DEASSERT_BT_WAKE:
VNDUSERIALDBG("## userial_vendor_ioctl: De-asserting BT_Wake ##");
ioctl(vnd_userial.fd, USERIAL_IOCTL_BT_WAKE_DEASSERT, NULL);
break;
case USERIAL_OP_GET_BT_WAKE_STATE:
ioctl(vnd_userial.fd, USERIAL_IOCTL_BT_WAKE_GET_ST, p_data);
break;
#endif // (BT_WAKE_VIA_USERIAL_IOCTL==TRUE)
default:
break;
}
}
/*******************************************************************************
**
** Function userial_set_port
**
** Description Configure UART port name
**
** Returns 0 : Success
** Otherwise : Fail
**
*******************************************************************************/
int userial_set_port(char *p_conf_name, char *p_conf_value, int param)
{
strcpy(vnd_userial.port_name, p_conf_value);
return 0;
}