blob: d633573c258b3b0e781dc93b681266d04d617e25 [file] [log] [blame]
/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
#include <asm/arch/omap.h>
#include <asm/arch/clocks.h>
#include <asm/io.h>
#include <asm/omap_common.h>
#include <asm/arch/mux_omap4.h>
struct omap_sysinfo {
char *board_string;
};
extern const struct omap_sysinfo sysinfo;
void gpmc_init(void);
void watchdog_init(void);
u32 get_device_type(void);
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
void set_muxconf_regs_essential(void);
void set_muxconf_regs_non_essential(void);
void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
void set_pl310_ctrl_reg(u32 val);
void omap_rev_string(void);
void setup_clocks_for_console(void);
void prcm_init(void);
void bypass_dpll(u32 *const base);
void freq_update_core(void);
u32 get_sys_clk_freq(void);
u32 omap4_ddr_clk(void);
void cancel_out(u32 *num, u32 *den, u32 den_limit);
void sdram_init(void);
u32 omap_sdram_size(void);
u32 cortex_rev(void);
void init_omap_revision(void);
void do_io_settings(void);
void omap_vc_init(u16 speed_khz);
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
u32 warm_reset(void);
void force_emif_self_refresh(void);
/*
* This is used to verify if the configuration header
* was executed by Romcode prior to control of transfer
* to the bootloader. SPL is responsible for saving and
* passing this to the u-boot.
*/
extern struct omap_boot_parameters boot_params;
static inline u32 running_from_sdram(void)
{
u32 pc;
asm volatile ("mov %0, pc" : "=r" (pc));
return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
(pc < OMAP44XX_DRAM_ADDR_SPACE_END));
}
static inline u8 uboot_loaded_by_spl(void)
{
/*
* u-boot can be running from sdram either because of configuration
* Header or by SPL. If because of CH, then the romcode sets the
* CHSETTINGS executed bit to true in the boot parameter structure that
* it passes to the bootloader.This parameter is stored in the ch_flags
* variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
* mandatory section if CH is present.
*/
if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
return 0;
else
return running_from_sdram();
}
/*
* The basic hardware init of OMAP(s_init()) can happen in 4
* different contexts:
* 1. SPL running from SRAM
* 2. U-Boot running from FLASH
* 3. Non-XIP U-Boot loaded to SDRAM by SPL
* 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
* Configuration Header feature
*
* This function finds this context.
* Defining as inline may help in compiling out unused functions in SPL
*/
static inline u32 omap_hw_init_context(void)
{
#ifdef CONFIG_SPL_BUILD
return OMAP_INIT_CONTEXT_SPL;
#else
if (uboot_loaded_by_spl())
return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
else if (running_from_sdram())
return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
else
return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
#endif
}
#endif