blob: cb85cb1279503635319d00578b935e68d43356bf [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#ifndef HCIMSGS_H
#define HCIMSGS_H
#include "bt_target.h"
#include "hcidefs.h"
#include "bt_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Message by message.... */
#define HCIC_GET_UINT8(p, off) (UINT8)(*((UINT8 *)((p) + 1) + p->offset + 3 + (off)))
#define HCIC_GET_UINT16(p, off) (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + \
(*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 1) << 8)))
#define HCIC_GET_UINT32(p, off) (UINT32)((*((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + \
(*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 1) << 8) + \
(*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 2) << 16) + \
(*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 3) << 24)))
#define HCIC_GET_ARRAY(p, off, x, len) \
{ \
UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x; \
int ii; for (ii = 0; ii < len; ii++) *rr++ = *qq++; \
}
#define HCIC_GET_ARRAY16(p, off, x) \
{ \
UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + 15; \
int ii; for (ii = 0; ii < 16; ii++) *rr-- = *qq++; \
}
#define HCIC_GET_BDADDR(p, off, x) \
{ \
UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + BD_ADDR_LEN - 1; \
int ii; for (ii = 0; ii < BD_ADDR_LEN; ii++) *rr-- = *qq++; \
}
#define HCIC_GET_DEVCLASS(p, off, x) \
{ \
UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + DEV_CLASS_LEN - 1; \
int ii; for (ii = 0; ii < DEV_CLASS_LEN; ii++) *rr-- = *qq++; \
}
#define HCIC_GET_LAP(p, off, x) \
{ \
UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + LAP_LEN - 1; \
int ii; for (ii = 0; ii < LAP_LEN; ii++) *rr-- = *qq++; \
}
#define HCIC_GET_POINTER(p, off) ((UINT8 *)((p) + 1) + p->offset + 3 + (off))
HCI_API extern BOOLEAN btsnd_hcic_inquiry(const LAP inq_lap, UINT8 duration,
UINT8 response_cnt);
#define HCIC_PARAM_SIZE_INQUIRY 5
#define HCIC_INQ_INQ_LAP_OFF 0
#define HCIC_INQ_DUR_OFF 3
#define HCIC_INQ_RSP_CNT_OFF 4
/* Inquiry */
/* Inquiry Cancel */
HCI_API extern BOOLEAN btsnd_hcic_inq_cancel(void);
#define HCIC_PARAM_SIZE_INQ_CANCEL 0
/* Periodic Inquiry Mode */
HCI_API extern BOOLEAN btsnd_hcic_per_inq_mode(UINT16 max_period, UINT16 min_period,
const LAP inq_lap, UINT8 duration,
UINT8 response_cnt);
#define HCIC_PARAM_SIZE_PER_INQ_MODE 9
#define HCI_PER_INQ_MAX_INTRVL_OFF 0
#define HCI_PER_INQ_MIN_INTRVL_OFF 2
#define HCI_PER_INQ_INQ_LAP_OFF 4
#define HCI_PER_INQ_DURATION_OFF 7
#define HCI_PER_INQ_RSP_CNT_OFF 8
/* Periodic Inquiry Mode */
/* Exit Periodic Inquiry Mode */
HCI_API extern BOOLEAN btsnd_hcic_exit_per_inq(void);
#define HCIC_PARAM_SIZE_EXIT_PER_INQ 0
/* Create Connection */
HCI_API extern BOOLEAN btsnd_hcic_create_conn(BD_ADDR dest, UINT16 packet_types,
UINT8 page_scan_rep_mode,
UINT8 page_scan_mode,
UINT16 clock_offset,
UINT8 allow_switch);
#define HCIC_PARAM_SIZE_CREATE_CONN 13
#define HCIC_CR_CONN_BD_ADDR_OFF 0
#define HCIC_CR_CONN_PKT_TYPES_OFF 6
#define HCIC_CR_CONN_REP_MODE_OFF 8
#define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9
#define HCIC_CR_CONN_CLK_OFF_OFF 10
#define HCIC_CR_CONN_ALLOW_SWITCH_OFF 12
/* Create Connection */
/* Disconnect */
HCI_API extern BOOLEAN btsnd_hcic_disconnect(UINT16 handle, UINT8 reason);
#define HCIC_PARAM_SIZE_DISCONNECT 3
#define HCI_DISC_HANDLE_OFF 0
#define HCI_DISC_REASON_OFF 2
/* Disconnect */
#if BTM_SCO_INCLUDED == TRUE
/* Add SCO Connection */
HCI_API extern BOOLEAN btsnd_hcic_add_SCO_conn (UINT16 handle, UINT16 packet_types);
#endif /* BTM_SCO_INCLUDED */
#define HCIC_PARAM_SIZE_ADD_SCO_CONN 4
#define HCI_ADD_SCO_HANDLE_OFF 0
#define HCI_ADD_SCO_PACKET_TYPES_OFF 2
/* Add SCO Connection */
/* Create Connection Cancel */
HCI_API extern BOOLEAN btsnd_hcic_create_conn_cancel(BD_ADDR dest);
#define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL 6
#define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF 0
/* Create Connection Cancel */
/* Accept Connection Request */
HCI_API extern BOOLEAN btsnd_hcic_accept_conn (BD_ADDR bd_addr, UINT8 role);
#define HCIC_PARAM_SIZE_ACCEPT_CONN 7
#define HCI_ACC_CONN_BD_ADDR_OFF 0
#define HCI_ACC_CONN_ROLE_OFF 6
/* Accept Connection Request */
/* Reject Connection Request */
HCI_API extern BOOLEAN btsnd_hcic_reject_conn (BD_ADDR bd_addr, UINT8 reason);
#define HCIC_PARAM_SIZE_REJECT_CONN 7
#define HCI_REJ_CONN_BD_ADDR_OFF 0
#define HCI_REJ_CONN_REASON_OFF 6
/* Reject Connection Request */
/* Link Key Request Reply */
HCI_API extern BOOLEAN btsnd_hcic_link_key_req_reply (BD_ADDR bd_addr,
LINK_KEY link_key);
#define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY 22
#define HCI_LINK_KEY_REPLY_BD_ADDR_OFF 0
#define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6
/* Link Key Request Reply */
/* Link Key Request Neg Reply */
HCI_API extern BOOLEAN btsnd_hcic_link_key_neg_reply (BD_ADDR bd_addr);
#define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY 6
#define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0
/* Link Key Request Neg Reply */
/* PIN Code Request Reply */
HCI_API extern BOOLEAN btsnd_hcic_pin_code_req_reply (BD_ADDR bd_addr,
UINT8 pin_code_len,
PIN_CODE pin_code);
#define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY 23
#define HCI_PIN_CODE_REPLY_BD_ADDR_OFF 0
#define HCI_PIN_CODE_REPLY_PIN_LEN_OFF 6
#define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7
/* PIN Code Request Reply */
/* Link Key Request Neg Reply */
HCI_API extern BOOLEAN btsnd_hcic_pin_code_neg_reply (BD_ADDR bd_addr);
#define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY 6
#define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0
/* Link Key Request Neg Reply */
/* Change Connection Type */
HCI_API extern BOOLEAN btsnd_hcic_change_conn_type (UINT16 handle, UINT16 packet_types);
#define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE 4
#define HCI_CHNG_PKT_TYPE_HANDLE_OFF 0
#define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF 2
/* Change Connection Type */
#define HCIC_PARAM_SIZE_CMD_HANDLE 2
#define HCI_CMD_HANDLE_HANDLE_OFF 0
HCI_API extern BOOLEAN btsnd_hcic_auth_request (UINT16 handle); /* Authentication Request */
/* Set Connection Encryption */
HCI_API extern BOOLEAN btsnd_hcic_set_conn_encrypt (UINT16 handle, BOOLEAN enable);
#define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT 3
#define HCI_SET_ENCRYPT_HANDLE_OFF 0
#define HCI_SET_ENCRYPT_ENABLE_OFF 2
/* Set Connection Encryption */
HCI_API extern BOOLEAN btsnd_hcic_change_link_key (UINT16 handle); /* Change Connection Link Key */
/* Master Link Key */
HCI_API extern BOOLEAN btsnd_hcic_master_link_key (BOOLEAN key_flag);
#define HCIC_PARAM_SIZE_MASTER_LINK_KEY 1
#define HCI_MASTER_KEY_FLAG_OFF 0
/* Master Link Key */
/* Remote Name Request */
HCI_API extern BOOLEAN btsnd_hcic_rmt_name_req (BD_ADDR bd_addr,
UINT8 page_scan_rep_mode,
UINT8 page_scan_mode,
UINT16 clock_offset);
#define HCIC_PARAM_SIZE_RMT_NAME_REQ 10
#define HCI_RMT_NAME_BD_ADDR_OFF 0
#define HCI_RMT_NAME_REP_MODE_OFF 6
#define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7
#define HCI_RMT_NAME_CLK_OFF_OFF 8
/* Remote Name Request */
/* Remote Name Request Cancel */
HCI_API extern BOOLEAN btsnd_hcic_rmt_name_req_cancel(BD_ADDR bd_addr);
#define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL 6
#define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF 0
/* Remote Name Request Cancel */
HCI_API extern BOOLEAN btsnd_hcic_rmt_features_req(UINT16 handle); /* Remote Features Request */
/* Remote Extended Features */
HCI_API extern BOOLEAN btsnd_hcic_rmt_ext_features(UINT16 handle, UINT8 page_num);
#define HCIC_PARAM_SIZE_RMT_EXT_FEATURES 3
#define HCI_RMT_EXT_FEATURES_HANDLE_OFF 0
#define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF 2
/* Remote Extended Features */
/* Local Extended Features */
HCI_API extern BOOLEAN btsnd_hcic_read_local_ext_features (UINT8 page_num);
#define HCIC_PARAM_SIZE_LOCAL_EXT_FEATURES 1
#define HCI_LOCAL_EXT_FEATURES_PAGE_NUM_OFF 0
/* Local Extended Features */
HCI_API extern BOOLEAN btsnd_hcic_rmt_ver_req(UINT16 handle); /* Remote Version Info Request */
HCI_API extern BOOLEAN btsnd_hcic_read_rmt_clk_offset(UINT16 handle); /* Remote Clock Offset */
HCI_API extern BOOLEAN btsnd_hcic_read_lmp_handle(UINT16 handle); /* Remote LMP Handle */
HCI_API extern BOOLEAN btsnd_hcic_setup_esco_conn (UINT16 handle,
UINT32 tx_bw, UINT32 rx_bw,
UINT16 max_latency, UINT16 voice,
UINT8 retrans_effort,
UINT16 packet_types);
#define HCIC_PARAM_SIZE_SETUP_ESCO 17
#define HCI_SETUP_ESCO_HANDLE_OFF 0
#define HCI_SETUP_ESCO_TX_BW_OFF 2
#define HCI_SETUP_ESCO_RX_BW_OFF 6
#define HCI_SETUP_ESCO_MAX_LAT_OFF 10
#define HCI_SETUP_ESCO_VOICE_OFF 12
#define HCI_SETUP_ESCO_RETRAN_EFF_OFF 14
#define HCI_SETUP_ESCO_PKT_TYPES_OFF 15
HCI_API extern BOOLEAN btsnd_hcic_accept_esco_conn (BD_ADDR bd_addr,
UINT32 tx_bw, UINT32 rx_bw,
UINT16 max_latency,
UINT16 content_fmt,
UINT8 retrans_effort,
UINT16 packet_types);
#define HCIC_PARAM_SIZE_ACCEPT_ESCO 21
#define HCI_ACCEPT_ESCO_BDADDR_OFF 0
#define HCI_ACCEPT_ESCO_TX_BW_OFF 6
#define HCI_ACCEPT_ESCO_RX_BW_OFF 10
#define HCI_ACCEPT_ESCO_MAX_LAT_OFF 14
#define HCI_ACCEPT_ESCO_VOICE_OFF 16
#define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF 18
#define HCI_ACCEPT_ESCO_PKT_TYPES_OFF 19
HCI_API extern BOOLEAN btsnd_hcic_reject_esco_conn (BD_ADDR bd_addr, UINT8 reason);
#define HCIC_PARAM_SIZE_REJECT_ESCO 7
#define HCI_REJECT_ESCO_BDADDR_OFF 0
#define HCI_REJECT_ESCO_REASON_OFF 6
/* Hold Mode */
HCI_API extern BOOLEAN btsnd_hcic_hold_mode(UINT16 handle, UINT16 max_hold_period,
UINT16 min_hold_period);
#define HCIC_PARAM_SIZE_HOLD_MODE 6
#define HCI_HOLD_MODE_HANDLE_OFF 0
#define HCI_HOLD_MODE_MAX_PER_OFF 2
#define HCI_HOLD_MODE_MIN_PER_OFF 4
/* Hold Mode */
/* Sniff Mode */
HCI_API extern BOOLEAN btsnd_hcic_sniff_mode(UINT16 handle,
UINT16 max_sniff_period,
UINT16 min_sniff_period,
UINT16 sniff_attempt,
UINT16 sniff_timeout);
#define HCIC_PARAM_SIZE_SNIFF_MODE 10
#define HCI_SNIFF_MODE_HANDLE_OFF 0
#define HCI_SNIFF_MODE_MAX_PER_OFF 2
#define HCI_SNIFF_MODE_MIN_PER_OFF 4
#define HCI_SNIFF_MODE_ATTEMPT_OFF 6
#define HCI_SNIFF_MODE_TIMEOUT_OFF 8
/* Sniff Mode */
HCI_API extern BOOLEAN btsnd_hcic_exit_sniff_mode(UINT16 handle); /* Exit Sniff Mode */
/* Park Mode */
HCI_API extern BOOLEAN btsnd_hcic_park_mode (UINT16 handle,
UINT16 beacon_max_interval,
UINT16 beacon_min_interval);
#define HCIC_PARAM_SIZE_PARK_MODE 6
#define HCI_PARK_MODE_HANDLE_OFF 0
#define HCI_PARK_MODE_MAX_PER_OFF 2
#define HCI_PARK_MODE_MIN_PER_OFF 4
/* Park Mode */
HCI_API extern BOOLEAN btsnd_hcic_exit_park_mode(UINT16 handle); /* Exit Park Mode */
/* QoS Setup */
HCI_API extern BOOLEAN btsnd_hcic_qos_setup (UINT16 handle, UINT8 flags,
UINT8 service_type,
UINT32 token_rate, UINT32 peak,
UINT32 latency, UINT32 delay_var);
#define HCIC_PARAM_SIZE_QOS_SETUP 20
#define HCI_QOS_HANDLE_OFF 0
#define HCI_QOS_FLAGS_OFF 2
#define HCI_QOS_SERVICE_TYPE_OFF 3
#define HCI_QOS_TOKEN_RATE_OFF 4
#define HCI_QOS_PEAK_BANDWIDTH_OFF 8
#define HCI_QOS_LATENCY_OFF 12
#define HCI_QOS_DELAY_VAR_OFF 16
/* QoS Setup */
HCI_API extern BOOLEAN btsnd_hcic_role_discovery (UINT16 handle); /* Role Discovery */
/* Switch Role Request */
HCI_API extern BOOLEAN btsnd_hcic_switch_role (BD_ADDR bd_addr, UINT8 role);
#define HCIC_PARAM_SIZE_SWITCH_ROLE 7
#define HCI_SWITCH_BD_ADDR_OFF 0
#define HCI_SWITCH_ROLE_OFF 6
/* Switch Role Request */
HCI_API extern BOOLEAN btsnd_hcic_read_policy_set(UINT16 handle); /* Read Policy Settings */
/* Write Policy Settings */
HCI_API extern BOOLEAN btsnd_hcic_write_policy_set(UINT16 handle, UINT16 settings);
#define HCIC_PARAM_SIZE_WRITE_POLICY_SET 4
#define HCI_WRITE_POLICY_HANDLE_OFF 0
#define HCI_WRITE_POLICY_SETTINGS_OFF 2
/* Write Policy Settings */
/* Read Default Policy Settings */
HCI_API extern BOOLEAN btsnd_hcic_read_def_policy_set(void);
#define HCIC_PARAM_SIZE_READ_DEF_POLICY_SET 0
/* Read Default Policy Settings */
/* Write Default Policy Settings */
HCI_API extern BOOLEAN btsnd_hcic_write_def_policy_set(UINT16 settings);
#define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET 2
#define HCI_WRITE_DEF_POLICY_SETTINGS_OFF 0
/* Write Default Policy Settings */
/* Flow Specification */
HCI_API extern BOOLEAN btsnd_hcic_flow_specification(UINT16 handle, UINT8 flags,
UINT8 flow_direct,
UINT8 service_type,
UINT32 token_rate,
UINT32 token_bucket_size,
UINT32 peak, UINT32 latency);
#define HCIC_PARAM_SIZE_FLOW_SPEC 21
#define HCI_FLOW_SPEC_HANDLE_OFF 0
#define HCI_FLOW_SPEC_FLAGS_OFF 2
#define HCI_FLOW_SPEC_FLOW_DIRECT_OFF 3
#define HCI_FLOW_SPEC_SERVICE_TYPE_OFF 4
#define HCI_FLOW_SPEC_TOKEN_RATE_OFF 5
#define HCI_FLOW_SPEC_TOKEN_BUCKET_SIZE_OFF 9
#define HCI_FLOW_SPEC_PEAK_BANDWIDTH_OFF 13
#define HCI_FLOW_SPEC_LATENCY_OFF 17
/* Flow Specification */
/******************************************
** Lisbon Features
*******************************************/
#if BTM_SSR_INCLUDED == TRUE
/* Sniff Subrating */
HCI_API extern BOOLEAN btsnd_hcic_sniff_sub_rate(UINT16 handle, UINT16 max_lat,
UINT16 min_remote_lat,
UINT16 min_local_lat);
#define HCIC_PARAM_SIZE_SNIFF_SUB_RATE 8
#define HCI_SNIFF_SUB_RATE_HANDLE_OFF 0
#define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF 2
#define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF 4
#define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF 6
/* Sniff Subrating */
#else /* BTM_SSR_INCLUDED == FALSE */
#define btsnd_hcic_sniff_sub_rate(handle, max_lat, min_remote_lat, min_local_lat) FALSE
#endif /* BTM_SSR_INCLUDED */
/* Extended Inquiry Response */
#if (BTM_EIR_SERVER_INCLUDED == TRUE)
HCI_API extern void btsnd_hcic_write_ext_inquiry_response(void *buffer, UINT8 fec_req);
#define HCIC_PARAM_SIZE_EXT_INQ_RESP 241
#define HCIC_EXT_INQ_RESP_FEC_OFF 0
#define HCIC_EXT_INQ_RESP_RESPONSE 1
HCI_API extern BOOLEAN btsnd_hcic_read_ext_inquiry_response(void); /* Read Extended Inquiry Response */
#else
#define btsnd_hcic_write_ext_inquiry_response(buffer, fec_req)
#define btsnd_hcic_read_ext_inquiry_response() FALSE
#endif
/* Write Simple Pairing Mode */
/**** Simple Pairing Commands ****/
HCI_API extern BOOLEAN btsnd_hcic_write_simple_pairing_mode(UINT8 mode);
#define HCIC_PARAM_SIZE_W_SIMP_PAIR 1
#define HCIC_WRITE_SP_MODE_OFF 0
HCI_API extern BOOLEAN btsnd_hcic_read_simple_pairing_mode (void);
#define HCIC_PARAM_SIZE_R_SIMP_PAIR 0
/* Write Simple Pairing Debug Mode */
HCI_API extern BOOLEAN btsnd_hcic_write_simp_pair_debug_mode(UINT8 debug_mode);
#define HCIC_PARAM_SIZE_SIMP_PAIR_DBUG 1
#define HCIC_WRITE_SP_DBUG_MODE_OFF 0
/* IO Capabilities Response */
HCI_API extern BOOLEAN btsnd_hcic_io_cap_req_reply (BD_ADDR bd_addr, UINT8 capability,
UINT8 oob_present, UINT8 auth_req);
#define HCIC_PARAM_SIZE_IO_CAP_RESP 9
#define HCI_IO_CAP_BD_ADDR_OFF 0
#define HCI_IO_CAPABILITY_OFF 6
#define HCI_IO_CAP_OOB_DATA_OFF 7
#define HCI_IO_CAP_AUTH_REQ_OFF 8
/* IO Capabilities Req Neg Reply */
HCI_API extern BOOLEAN btsnd_hcic_io_cap_req_neg_reply (BD_ADDR bd_addr, UINT8 err_code);
#define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7
#define HCI_IO_CAP_NR_BD_ADDR_OFF 0
#define HCI_IO_CAP_NR_ERR_CODE 6
/* Read Local OOB Data */
HCI_API extern BOOLEAN btsnd_hcic_read_local_oob_data (void);
#define HCIC_PARAM_SIZE_R_LOCAL_OOB 0
HCI_API extern BOOLEAN btsnd_hcic_user_conf_reply (BD_ADDR bd_addr, BOOLEAN is_yes);
#define HCIC_PARAM_SIZE_UCONF_REPLY 6
#define HCI_USER_CONF_BD_ADDR_OFF 0
HCI_API extern BOOLEAN btsnd_hcic_user_passkey_reply (BD_ADDR bd_addr, UINT32 value);
#define HCIC_PARAM_SIZE_U_PKEY_REPLY 10
#define HCI_USER_PASSKEY_BD_ADDR_OFF 0
#define HCI_USER_PASSKEY_VALUE_OFF 6
HCI_API extern BOOLEAN btsnd_hcic_user_passkey_neg_reply (BD_ADDR bd_addr);
#define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6
#define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0
/* Remote OOB Data Request Reply */
HCI_API extern BOOLEAN btsnd_hcic_rem_oob_reply (BD_ADDR bd_addr, UINT8 *p_c,
UINT8 *p_r);
#define HCIC_PARAM_SIZE_REM_OOB_REPLY 38
#define HCI_REM_OOB_DATA_BD_ADDR_OFF 0
#define HCI_REM_OOB_DATA_C_OFF 6
#define HCI_REM_OOB_DATA_R_OFF 22
/* Remote OOB Data Request Negative Reply */
HCI_API extern BOOLEAN btsnd_hcic_rem_oob_neg_reply (BD_ADDR bd_addr);
#define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY 6
#define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF 0
/* Read Tx Power Level */
HCI_API extern BOOLEAN btsnd_hcic_read_inq_tx_power (void);
#define HCIC_PARAM_SIZE_R_TX_POWER 0
/* Write Tx Power Level */
HCI_API extern BOOLEAN btsnd_hcic_write_inq_tx_power (INT8 level);
#define HCIC_PARAM_SIZE_W_TX_POWER 1
#define HCIC_WRITE_TX_POWER_LEVEL_OFF 0
/* Read Default Erroneous Data Reporting */
HCI_API extern BOOLEAN btsnd_hcic_read_default_erroneous_data_rpt (void);
#define HCIC_PARAM_SIZE_R_ERR_DATA_RPT 0
/* Write Default Erroneous Data Reporting */
HCI_API extern BOOLEAN btsnd_hcic_write_default_erroneous_data_rpt (UINT8 level);
#define HCIC_PARAM_SIZE_W_ERR_DATA_RPT 1
#define HCIC_WRITE_ERR_DATA_RPT_OFF 0
#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
HCI_API extern BOOLEAN btsnd_hcic_enhanced_flush (UINT16 handle, UINT8 packet_type);
#define HCIC_PARAM_SIZE_ENHANCED_FLUSH 3
#endif
HCI_API extern BOOLEAN btsnd_hcic_send_keypress_notif (BD_ADDR bd_addr, UINT8 notif);
#define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF 7
#define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF 0
#define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF 6
HCI_API extern BOOLEAN btsnd_hcic_refresh_encryption_key(UINT16 handle); /* Refresh Encryption Key */
/**** end of Simple Pairing Commands ****/
HCI_API extern BOOLEAN btsnd_hcic_set_event_mask(UINT8 local_controller_id, BT_EVENT_MASK evt_mask);
#define HCIC_PARAM_SIZE_SET_EVENT_MASK 8
#define HCI_EVENT_MASK_MASK_OFF 0
/* Set Event Mask */
/* Reset */
HCI_API extern BOOLEAN btsnd_hcic_set_event_mask_page_2 (UINT8 local_controller_id,
BT_EVENT_MASK event_mask);
#define HCIC_PARAM_SIZE_SET_EVENT_MASK_PAGE_2 8
#define HCI_EVENT_MASK_MASK_OFF 0
/* Set Event Mask Page 2 */
/* Reset */
HCI_API extern BOOLEAN btsnd_hcic_reset(UINT8 local_controller_id);
#define HCIC_PARAM_SIZE_RESET 0
/* Reset */
/* Store Current Settings */
#define MAX_FILT_COND (sizeof (BD_ADDR) + 1)
HCI_API extern BOOLEAN btsnd_hcic_set_event_filter(UINT8 filt_type,
UINT8 filt_cond_type,
UINT8 *filt_cond,
UINT8 filt_cond_len);
#define HCIC_PARAM_SIZE_SET_EVT_FILTER 9
#define HCI_FILT_COND_FILT_TYPE_OFF 0
#define HCI_FILT_COND_COND_TYPE_OFF 1
#define HCI_FILT_COND_FILT_OFF 2
/* Set Event Filter */
HCI_API extern BOOLEAN btsnd_hcic_flush(UINT8 local_controller_id, UINT16 handle); /* Flush */
/* Create New Unit Type */
HCI_API extern BOOLEAN btsnd_hcic_new_unit_key(void);
#define HCIC_PARAM_SIZE_NEW_UNIT_KEY 0
/* Create New Unit Type */
/* Read Stored Key */
HCI_API extern BOOLEAN btsnd_hcic_read_stored_key (BD_ADDR bd_addr,
BOOLEAN read_all_flag);
#define HCIC_PARAM_SIZE_READ_STORED_KEY 7
#define HCI_READ_KEY_BD_ADDR_OFF 0
#define HCI_READ_KEY_ALL_FLAG_OFF 6
/* Read Stored Key */
#define MAX_WRITE_KEYS 10
/* Write Stored Key */
HCI_API extern BOOLEAN btsnd_hcic_write_stored_key (UINT8 num_keys, BD_ADDR *bd_addr,
LINK_KEY *link_key);
#define HCIC_PARAM_SIZE_WRITE_STORED_KEY sizeof(btmsg_hcic_write_stored_key_t)
#define HCI_WRITE_KEY_NUM_KEYS_OFF 0
#define HCI_WRITE_KEY_BD_ADDR_OFF 1
#define HCI_WRITE_KEY_KEY_OFF 7
/* only 0x0b keys cab be sent in one HCI command */
#define HCI_MAX_NUM_OF_LINK_KEYS_PER_CMMD 0x0b
/* Write Stored Key */
/* Delete Stored Key */
HCI_API extern BOOLEAN btsnd_hcic_delete_stored_key (BD_ADDR bd_addr, BOOLEAN delete_all_flag);
#define HCIC_PARAM_SIZE_DELETE_STORED_KEY 7
#define HCI_DELETE_KEY_BD_ADDR_OFF 0
#define HCI_DELETE_KEY_ALL_FLAG_OFF 6
/* Delete Stored Key */
/* Change Local Name */
HCI_API extern BOOLEAN btsnd_hcic_change_name(BD_NAME name);
#define HCIC_PARAM_SIZE_CHANGE_NAME BD_NAME_LEN
#define HCI_CHANGE_NAME_NAME_OFF 0
/* Change Local Name */
#define HCIC_PARAM_SIZE_READ_CMD 0
#define HCIC_PARAM_SIZE_WRITE_PARAM1 1
#define HCIC_WRITE_PARAM1_PARAM_OFF 0
#define HCIC_PARAM_SIZE_WRITE_PARAM2 2
#define HCIC_WRITE_PARAM2_PARAM_OFF 0
#define HCIC_PARAM_SIZE_WRITE_PARAM3 3
#define HCIC_WRITE_PARAM3_PARAM_OFF 0
#define HCIC_PARAM_SIZE_SET_AFH_CHANNELS 10
HCI_API extern BOOLEAN btsnd_hcic_read_pin_type(void); /* Read PIN Type */
HCI_API extern BOOLEAN btsnd_hcic_write_pin_type(UINT8 type); /* Write PIN Type */
HCI_API extern BOOLEAN btsnd_hcic_read_auto_accept(void); /* Read Auto Accept */
HCI_API extern BOOLEAN btsnd_hcic_write_auto_accept(UINT8 flag); /* Write Auto Accept */
HCI_API extern BOOLEAN btsnd_hcic_read_name (void); /* Read Local Name */
HCI_API extern BOOLEAN btsnd_hcic_read_conn_acc_tout(UINT8 local_controller_id); /* Read Connection Accept Timout */
HCI_API extern BOOLEAN btsnd_hcic_write_conn_acc_tout(UINT8 local_controller_id, UINT16 tout); /* Write Connection Accept Timout */
HCI_API extern BOOLEAN btsnd_hcic_read_page_tout(void); /* Read Page Timout */
HCI_API extern BOOLEAN btsnd_hcic_write_page_tout(UINT16 timeout); /* Write Page Timout */
HCI_API extern BOOLEAN btsnd_hcic_read_scan_enable(void); /* Read Scan Enable */
HCI_API extern BOOLEAN btsnd_hcic_write_scan_enable(UINT8 flag); /* Write Scan Enable */
HCI_API extern BOOLEAN btsnd_hcic_read_pagescan_cfg(void); /* Read Page Scan Activity */
HCI_API extern BOOLEAN btsnd_hcic_write_pagescan_cfg(UINT16 interval,
UINT16 window); /* Write Page Scan Activity */
#define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG 4
#define HCI_SCAN_CFG_INTERVAL_OFF 0
#define HCI_SCAN_CFG_WINDOW_OFF 2
/* Write Page Scan Activity */
HCI_API extern BOOLEAN btsnd_hcic_read_inqscan_cfg(void); /* Read Inquiry Scan Activity */
/* Write Inquiry Scan Activity */
HCI_API extern BOOLEAN btsnd_hcic_write_inqscan_cfg(UINT16 interval, UINT16 window);
#define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG 4
#define HCI_SCAN_CFG_INTERVAL_OFF 0
#define HCI_SCAN_CFG_WINDOW_OFF 2
/* Write Inquiry Scan Activity */
HCI_API extern BOOLEAN btsnd_hcic_read_auth_enable(void); /* Read Authentication Enable */
HCI_API extern BOOLEAN btsnd_hcic_write_auth_enable(UINT8 flag); /* Write Authentication Enable */
HCI_API extern BOOLEAN btsnd_hcic_read_encr_mode (void); /* Read encryption mode */
HCI_API extern BOOLEAN btsnd_hcic_write_encr_mode (UINT8 mode); /* Write encryption mode */
HCI_API extern BOOLEAN btsnd_hcic_read_dev_class(void); /* Read Class of Device */
HCI_API extern BOOLEAN btsnd_hcic_write_dev_class(DEV_CLASS dev); /* Write Class of Device */
HCI_API extern BOOLEAN btsnd_hcic_read_voice_settings(void); /* Read Voice Settings */
HCI_API extern BOOLEAN btsnd_hcic_write_voice_settings(UINT16 flags); /* Write Voice Settings */
/* Host Controller to Host flow control */
#define HCI_HOST_FLOW_CTRL_OFF 0
#define HCI_HOST_FLOW_CTRL_ACL_ON 1
#define HCI_HOST_FLOW_CTRL_SCO_ON 2
#define HCI_HOST_FLOW_CTRL_BOTH_ON 3
HCI_API extern BOOLEAN btsnd_hcic_set_host_flow_ctrl (UINT8 value); /* Enable/disable flow control toward host */
HCI_API extern BOOLEAN btsnd_hcic_read_auto_flush_tout(UINT16 handle); /* Read Retransmit Timout */
HCI_API extern BOOLEAN btsnd_hcic_write_auto_flush_tout(UINT16 handle,
UINT16 timeout); /* Write Retransmit Timout */
#define HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT 4
#define HCI_FLUSH_TOUT_HANDLE_OFF 0
#define HCI_FLUSH_TOUT_TOUT_OFF 2
HCI_API extern BOOLEAN btsnd_hcic_read_num_bcast_xmit(void); /* Read Num Broadcast Retransmits */
HCI_API extern BOOLEAN btsnd_hcic_write_num_bcast_xmit(UINT8 num); /* Write Num Broadcast Retransmits */
HCI_API extern BOOLEAN btsnd_hcic_read_hold_mode_act(void); /* Read Hold Mode Activity */
HCI_API extern BOOLEAN btsnd_hcic_write_hold_mode_act(UINT8 flags); /* Write Hold Mode Activity */
HCI_API extern BOOLEAN btsnd_hcic_read_tx_power(UINT16 handle, UINT8 type); /* Read Tx Power */
#define HCIC_PARAM_SIZE_READ_TX_POWER 3
#define HCI_READ_TX_POWER_HANDLE_OFF 0
#define HCI_READ_TX_POWER_TYPE_OFF 2
/* Read transmit power level parameter */
#define HCI_READ_CURRENT 0x00
#define HCI_READ_MAXIMUM 0x01
HCI_API extern BOOLEAN btsnd_hcic_read_sco_flow_enable(void); /* Read Authentication Enable */
HCI_API extern BOOLEAN btsnd_hcic_write_sco_flow_enable(UINT8 flag); /* Write Authentication Enable */
/* Set Host Buffer Size */
HCI_API extern BOOLEAN btsnd_hcic_set_host_buf_size (UINT16 acl_len,
UINT8 sco_len,
UINT16 acl_num,
UINT16 sco_num);
#define HCIC_PARAM_SIZE_SET_HOST_BUF_SIZE 7
#define HCI_HOST_BUF_SIZE_ACL_LEN_OFF 0
#define HCI_HOST_BUF_SIZE_SCO_LEN_OFF 2
#define HCI_HOST_BUF_SIZE_ACL_NUM_OFF 3
#define HCI_HOST_BUF_SIZE_SCO_NUM_OFF 5
HCI_API extern BOOLEAN btsnd_hcic_host_num_xmitted_pkts (UINT8 num_handles,
UINT16 *handle,
UINT16 *num_pkts); /* Set Host Buffer Size */
#define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE sizeof(btmsg_hcic_num_pkts_done_t)
#define MAX_DATA_HANDLES 10
#define HCI_PKTS_DONE_NUM_HANDLES_OFF 0
#define HCI_PKTS_DONE_HANDLE_OFF 1
#define HCI_PKTS_DONE_NUM_PKTS_OFF 3
HCI_API extern BOOLEAN btsnd_hcic_read_link_super_tout(UINT8 local_controller_id, UINT16 handle); /* Read Link Supervision Timeout */
/* Write Link Supervision Timeout */
HCI_API extern BOOLEAN btsnd_hcic_write_link_super_tout(UINT8 local_controller_id, UINT16 handle, UINT16 timeout);
#define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT 4
#define HCI_LINK_SUPER_TOUT_HANDLE_OFF 0
#define HCI_LINK_SUPER_TOUT_TOUT_OFF 2
/* Write Link Supervision Timeout */
HCI_API extern BOOLEAN btsnd_hcic_read_max_iac (void); /* Read Num Supported IAC */
HCI_API extern BOOLEAN btsnd_hcic_read_cur_iac_lap (void); /* Read Current IAC LAP */
HCI_API extern BOOLEAN btsnd_hcic_write_cur_iac_lap (UINT8 num_cur_iac,
LAP * const iac_lap); /* Write Current IAC LAP */
#define MAX_IAC_LAPS 0x40
#define HCI_WRITE_IAC_LAP_NUM_OFF 0
#define HCI_WRITE_IAC_LAP_LAP_OFF 1
/* Write Current IAC LAP */
/* Read Clock */
HCI_API extern BOOLEAN btsnd_hcic_read_clock (UINT16 handle, UINT8 which_clock);
#define HCIC_PARAM_SIZE_READ_CLOCK 3
#define HCI_READ_CLOCK_HANDLE_OFF 0
#define HCI_READ_CLOCK_WHICH_CLOCK 2
/* Read Clock */
#ifdef TESTER_ENABLE
#define HCIC_PARAM_SIZE_ENTER_TEST_MODE 2
#define HCI_ENTER_TEST_HANDLE_OFF 0
#define HCIC_PARAM_SIZE_TEST_CNTRL 10
#define HCI_TEST_CNTRL_HANDLE_OFF 0
#define HCI_TEST_CNTRL_SCENARIO_OFF 2
#define HCI_TEST_CNTRL_HOPPINGMODE_OFF 3
#define HCI_TEST_CNTRL_TX_FREQ_OFF 4
#define HCI_TEST_CNTRL_RX_FREQ_OFF 5
#define HCI_TEST_CNTRL_PWR_CNTRL_MODE_OFF 6
#define HCI_TEST_CNTRL_POLL_PERIOD_OFF 7
#define HCI_TEST_CNTRL_PKT_TYPE_OFF 8
#define HCI_TEST_CNTRL_LENGTH_OFF 9
#endif
HCI_API extern BOOLEAN btsnd_hcic_read_page_scan_per (void); /* Read Page Scan Period Mode */
HCI_API extern BOOLEAN btsnd_hcic_write_page_scan_per (UINT8 mode); /* Write Page Scan Period Mode */
HCI_API extern BOOLEAN btsnd_hcic_read_page_scan_mode (void); /* Read Page Scan Mode */
HCI_API extern BOOLEAN btsnd_hcic_write_page_scan_mode (UINT8 mode); /* Write Page Scan Mode */
HCI_API extern BOOLEAN btsnd_hcic_read_local_ver (UINT8 local_controller_id); /* Read Local Version Info */
HCI_API extern BOOLEAN btsnd_hcic_read_local_supported_cmds (UINT8 local_controller_id); /* Read Local Supported Commands */
HCI_API extern BOOLEAN btsnd_hcic_read_local_features (void); /* Read Local Supported Features */
HCI_API extern BOOLEAN btsnd_hcic_read_buffer_size (void); /* Read Local buffer sizes */
HCI_API extern BOOLEAN btsnd_hcic_read_country_code (void); /* Read Country Code */
HCI_API extern BOOLEAN btsnd_hcic_read_bd_addr (void); /* Read Local BD_ADDR */
HCI_API extern BOOLEAN btsnd_hcic_read_fail_contact_count (UINT8 local_controller_id, UINT16 handle); /* Read Failed Contact Counter */
HCI_API extern BOOLEAN btsnd_hcic_reset_fail_contact_count (UINT8 local_controller_id, UINT16 handle);/* Reset Failed Contact Counter */
HCI_API extern BOOLEAN btsnd_hcic_get_link_quality (UINT16 handle); /* Get Link Quality */
HCI_API extern BOOLEAN btsnd_hcic_read_rssi (UINT16 handle); /* Read RSSI */
HCI_API extern BOOLEAN btsnd_hcic_read_loopback_mode (void); /* Read Loopback Mode */
HCI_API extern BOOLEAN btsnd_hcic_write_loopback_mode (UINT8 mode); /* Write Loopback Mode */
HCI_API extern BOOLEAN btsnd_hcic_enable_test_mode (void); /* Enable Device Under Test Mode */
HCI_API extern BOOLEAN btsnd_hcic_write_pagescan_type(UINT8 type); /* Write Page Scan Type */
HCI_API extern BOOLEAN btsnd_hcic_read_pagescan_type(void); /* Read Page Scan Type */
HCI_API extern BOOLEAN btsnd_hcic_write_inqscan_type(UINT8 type); /* Write Inquiry Scan Type */
HCI_API extern BOOLEAN btsnd_hcic_read_inqscan_type(void); /* Read Inquiry Scan Type */
HCI_API extern BOOLEAN btsnd_hcic_write_inquiry_mode(UINT8 type); /* Write Inquiry Mode */
HCI_API extern BOOLEAN btsnd_hcic_read_inquiry_mode(void); /* Read Inquiry Mode */
HCI_API extern BOOLEAN btsnd_hcic_set_afh_channels (UINT8 first, UINT8 last);
HCI_API extern BOOLEAN btsnd_hcic_write_afh_channel_assessment_mode (UINT8 mode);
HCI_API extern BOOLEAN btsnd_hcic_set_afh_host_channel_class (UINT8 *p_afhchannelmap);
HCI_API extern BOOLEAN btsnd_hcic_read_afh_channel_assessment_mode(void);
HCI_API extern BOOLEAN btsnd_hcic_read_afh_channel_map (UINT16 handle);
HCI_API extern BOOLEAN btsnd_hcic_nop(void); /* NOP */
/* Send HCI Data */
HCI_API extern void btsnd_hcic_data (BT_HDR *p_buf, UINT16 len, UINT16 handle, UINT8 boundary, UINT8 broadcast);
#define HCI_DATA_HANDLE_MASK 0x0FFF
#define HCID_GET_HANDLE_EVENT(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \
(*((UINT8 *)((p) + 1) + p->offset + 1) << 8)))
#define HCID_GET_HANDLE(u16) (UINT16)((u16) & HCI_DATA_HANDLE_MASK)
#define HCI_DATA_EVENT_MASK 3
#define HCI_DATA_EVENT_OFFSET 12
#define HCID_GET_EVENT(u16) (UINT8)(((u16) >> HCI_DATA_EVENT_OFFSET) & HCI_DATA_EVENT_MASK)
#define HCI_DATA_BCAST_MASK 3
#define HCI_DATA_BCAST_OFFSET 10
#define HCID_GET_BCAST(u16) (UINT8)(((u16) >> HCI_DATA_BCAST_OFFSET) & HCI_DATA_BCAST_MASK)
#define HCID_GET_ACL_LEN(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 2) + \
(*((UINT8 *)((p) + 1) + p->offset + 3) << 8)))
#define HCID_HEADER_SIZE 4
/* Send HCI Data */
#define HCID_GET_SCO_LEN(p) (*((UINT8 *)((p) + 1) + p->offset + 2))
HCI_API extern void btsnd_hcic_vendor_spec_cmd (
void *buffer, UINT16 opcode,
UINT8 len, UINT8 *p_data,
void *p_cmd_cplt_cback);
/*********************************************************************************
** **
** H C I E V E N T S **
** **
*********************************************************************************/
/* Inquiry Complete Event */
HCI_API extern void btsnd_hcie_inq_comp(void *buffer, UINT8 status);
#define HCIE_PARAM_SIZE_INQ_COMP 1
/* Inquiry Response Event */
HCI_API extern void btsnd_hcie_inq_res(void *buffer, UINT8 num_resp, UINT8 **bd_addr,
UINT8 *page_scan_rep_mode, UINT8 *page_scan_per_mode,
UINT8 *page_scan_mode, UINT8 **dev_class,
UINT16 *clock_offset);
/* Connection Complete Event */
HCI_API extern void btsnd_hcie_connection_comp(void *buffer, UINT8 status, UINT16 handle,
BD_ADDR bd_addr, UINT8 link_type, UINT8 encr_mode);
#define HCIE_PARAM_SIZE_CONNECTION_COMP 11
#define HCI_LINK_TYPE_SCO 0x00
#define HCI_LINK_TYPE_ACL 0x01
#define HCI_ENCRYPT_MODE_DISABLED 0x00
#define HCI_ENCRYPT_MODE_POINT_TO_POINT 0x01
#define HCI_ENCRYPT_MODE_ALL 0x02
/* Connection Request Event */
HCI_API extern void btsnd_hcie_connection_req(void *buffer, BD_ADDR bd_addr, DEV_CLASS dev_class, UINT8 link_type);
#define HCIE_PARAM_SIZE_CONNECTION_REQ 10
#define HCI_LINK_TYPE_SCO 0x00
#define HCI_LINK_TYPE_ACL 0x01
/* Disonnection Complete Event */
HCI_API extern void btsnd_hcie_disc_comp(void *buffer, UINT8 status, UINT16 handle, UINT8 reason);
#define HCIE_PARAM_SIZE_DISC_COMP 4
/* Authentication Complete Event */
HCI_API extern void btsnd_hcie_auth_comp (void *buffer, UINT8 status, UINT16 handle);
#define HCIE_PARAM_SIZE_AUTH_COMP 3
/* Remote Name Request Complete Event */
HCI_API extern void btsnd_hcie_rmt_name_req_comp(void *buffer, UINT8 status, BD_ADDR bd_addr, BD_NAME name);
#define HCIE_PARAM_SIZE_RMT_NAME_REQ_COMP (1 + BD_ADDR_LEN + BD_NAME_LEN)
/* Encryption Change Event */
HCI_API extern void btsnd_hcie_encryption_change (void *buffer, UINT8 status, UINT16 handle, BOOLEAN enable);
#define HCIE_PARAM_SIZE_ENCR_CHANGE 4
/* Connection Link Key Change Event */
HCI_API extern void btsnd_hcie_conn_link_key_change (void *buffer, UINT8 status, UINT16 handle);
#define HCIE_PARAM_SIZE_LINK_KEY_CHANGE 3
/* Encryption Key Refresh Complete Event */
HCI_API extern void btsnd_hcie_encrypt_key_refresh (void *buffer, UINT8 status, UINT16 handle);
#define HCIE_PARAM_SIZE_ENCRYPT_KEY_REFRESH 3
/* Master Link Key Complete Event */
HCI_API extern void btsnd_hcie_master_link_key (void *buffer, UINT8 status, UINT16 handle, UINT8 flag);
#define HCIE_PARAM_SIZE_MASTER_LINK_KEY 4
/* Read Remote Supported Features Complete Event */
HCI_API extern void btsnd_hcie_read_rmt_features (void *buffer, UINT8 status, UINT16 handle, UINT8 *features);
#define LMP_FEATURES_SIZE 8
#define HCIE_PARAM_SIZE_READ_RMT_FEATURES 11
/* Read Remote Extended Features Complete Event */
HCI_API extern void btsnd_hcie_read_rmt_ext_features (void *buffer, UINT8 status, UINT16 handle, UINT8 page_num,
UINT8 max_page_num, UINT8 *features);
#define EXT_LMP_FEATURES_SIZE 8
#define HCIE_PARAM_SIZE_READ_RMT_EXT_FEATURES 13
/* Read Remote Version Complete Event */
HCI_API extern void btsnd_hcie_read_rmt_version (void *buffer, UINT8 status, UINT16 handle, UINT8 version,
UINT16 comp_name, UINT16 sub_version);
#define HCIE_PARAM_SIZE_READ_RMT_VERSION 8
/* QOS setup complete */
HCI_API extern void btsnd_hcie_qos_setup_compl (void *buffer, UINT8 status, UINT16 handle, UINT8 flags,
UINT8 service_type, UINT32 token_rate, UINT32 peak,
UINT32 latency, UINT32 delay_var);
#define HCIE_PARAM_SIZE_QOS_SETUP_COMP 21
/* Flow Specification complete */
HCI_API extern void btsnd_hcie_flow_spec_compl (void *buffer, UINT8 status, UINT16 handle, UINT8 flags,
UINT8 flow_direction, UINT8 service_type, UINT32 token_rate, UINT32 token_bucket_size,
UINT32 peak, UINT32 latency);
#define HCIE_PARAM_SIZE_FLOW_SPEC_COMP 22
/* Command Complete Event */
HCI_API extern void btsnd_hcie_cmd_comp(void *buffer, UINT8 max_host_cmds, UINT16 opcode, UINT8 status);
#define HCIE_PARAM_SIZE_CMD_COMP 4
/* Command Complete with pre-filled in parameters */
HCI_API extern void btsnd_hcie_cmd_comp_params (void *buffer, UINT8 max_host_cmds, UINT16 cmd_opcode, UINT8 status);
#define HCI_CMD_COMPL_PARAM_OFFSET 4
/* Command Complete Event with 1-byte param */
HCI_API extern void btsnd_hcie_cmd_comp_param1(void *buffer, UINT8 max_host_cmds, UINT16 opcode,
UINT8 status, UINT8 param1);
#define HCIE_PARAM_SIZE_CMD_COMP_PARAM1 5
/* Command Complete Event with 2-byte param */
HCI_API extern void btsnd_hcie_cmd_comp_param2(void *buffer, UINT8 max_host_cmds, UINT16 opcode,
UINT8 status, UINT16 param2);
#define HCIE_PARAM_SIZE_CMD_COMP_PARAM2 6
/* Command Complete Event with BD-addr as param */
HCI_API extern void btsnd_hcie_cmd_comp_bd_addr(void *buffer, UINT8 max_host_cmds, UINT16 opcode,
UINT8 status, BD_ADDR bd_addr);
#define HCIE_PARAM_SIZE_CMD_COMP_BD_ADDR 10
/* Command Pending Event */
HCI_API extern void btsnd_hcie_cmd_status (void *buffer, UINT8 status, UINT8 max_host_cmds, UINT16 opcode);
#define HCIE_PARAM_SIZE_CMD_STATUS 4
/* HW failure Event */
HCI_API extern void btsnd_hcie_hw_failure (void *buffer, UINT8 code);
#define HCIE_PARAM_SIZE_HW_FAILURE 1
/* Flush Occured Event */
HCI_API extern void btsnd_hcie_flush_occured (void *buffer, UINT16 handle);
#define HCIE_PARAM_SIZE_FLUSH_OCCURED 2
/* Role Changed Event */
HCI_API extern void btsnd_hcie_role_change (void *buffer, UINT8 status, BD_ADDR bd_addr, UINT8 role);
#define HCIE_PARAM_SIZE_ROLE_CHANGE 8
/* Ready for Data Packets Event */
HCI_API extern void btsnd_hcie_num_compl_pkts (void *buffer, UINT8 num_handles, UINT16 *p_handle, UINT16 *num_pkts);
#define MAX_DATA_HANDLES 10
/* Mode Change Event */
HCI_API extern void btsnd_hcie_mode_change (void *buffer, UINT8 status, UINT16 handle,
UINT8 mode, UINT16 interval);
#define HCIE_PARAM_SIZE_MODE_CHANGE 6
#define MAX_DATA_HANDLES 10
/* Return Link Keys Event */
HCI_API extern void btsnd_hcie_return_link_keys (void *buffer, UINT8 num_keys, BD_ADDR *bd_addr, LINK_KEY *link_key);
/* This should not be more than 0x0b */
#define MAX_LINK_KEYS 10
/* PIN Code Request Event */
HCI_API extern void btsnd_hcie_pin_code_req (void *buffer, BD_ADDR bd_addr);
#define HCIE_PARAM_SIZE_PIN_CODE_REQ 6
/* Link Key Request Event */
HCI_API extern void btsnd_hcie_link_key_req (void *buffer, BD_ADDR bd_addr);
#define HCIE_PARAM_SIZE_LINK_KEY_REQ 6
/* Link Key Notification Event */
HCI_API extern void btsnd_hcie_link_key_notify (void *buffer, BD_ADDR bd_addr, LINK_KEY link_key, UINT8 key_type);
#define HCIE_PARAM_SIZE_LINK_KEY_NOTIFY 23
/* Loopback Command Event */
HCI_API extern void btsnd_hcie_loopback_command (void *buffer, UINT8 data_len, UINT8 *data);
#define HCIE_PARAM_SIZE_LOOPBACK_COMMAND sizeof(btmsg_hcie_loopback_cmd_t)
/* Data Buffer Overflow Event */
HCI_API extern void btsnd_hcie_data_buf_overflow (void *buffer, UINT8 link_type);
#define HCIE_PARAM_SIZE_DATA_BUF_OVERFLOW 1
/* Max Slots Change Event */
HCI_API extern void btsnd_hcie_max_slots_change(void *buffer, UINT16 handle, UINT8 max_slots);
#define HCIE_PARAM_SIZE_MAX_SLOTS_CHANGE 3
/* Read Clock Offset Complet Event */
HCI_API extern void btsnd_hcie_read_clock_off_comp(void *buffer, UINT8 status, UINT16 handle,
UINT16 clock_offset);
#define HCIE_PARAM_SIZE_READ_CLOCK_OFF_COMP 5
/* Connection Packet Type Change Event */
HCI_API extern void btsnd_hcie_pkt_type_change (void *buffer, UINT8 status, UINT16 handle, UINT16 pkt_type);
#define HCIE_PARAM_SIZE_PKT_TYPE_CHANGE 5
/* QOS violation Event */
HCI_API extern void btsnd_hcie_qos_violation (void *buffer, UINT16 handle);
#define HCIE_PARAM_SIZE_QOS_VIOLATION 2
/* Page Scan Mode Change Event */
HCI_API extern void btsnd_hcie_pagescan_mode_chng (void *buffer, BD_ADDR bd_addr, UINT8 mode);
#define HCIE_PARAM_SIZE_PAGE_SCAN_MODE_CHNG 7
/* Page Scan Repetition Mode Change Event */
HCI_API extern void btsnd_hcie_pagescan_rep_mode_chng (void *buffer, BD_ADDR bd_addr, UINT8 mode);
#define HCIE_PARAM_SIZE_PAGE_SCAN_REP_MODE_CHNG 7
/* Sniff Sub Rate Event */
HCI_API extern void btsnd_hcie_sniff_sub_rate(void *buffer, UINT8 status, UINT16 handle, UINT16 max_tx_lat, UINT16 max_rx_lat,
UINT16 min_remote_timeout, UINT16 min_local_timeout);
#define HCIE_PARAM_SIZE_SNIFF_SUB_RATE 11
/* Extended Inquiry Result Event */
HCI_API extern void btsnd_hcie_ext_inquiry_result(void *buffer, UINT8 num_resp, UINT8 **bd_addr,
UINT8 *page_scan_rep_mode, UINT8 *reserved,
UINT8 **dev_class, UINT16 *clock_offset, UINT8 *rssi, UINT8 *p_data);
#if (BLE_INCLUDED == TRUE)
/********************************************************************************
** BLE Commands
** Note: "local_controller_id" is for transport, not counted in HCI message size
*********************************************************************************/
#define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD 8
#define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD 6
#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS 15
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP 31
#define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE 1
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM 7
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE 2
#define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN 25
#define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL 0
#define HCIC_PARAM_SIZE_CLEAR_WHITE_LIST 0
#define HCIC_PARAM_SIZE_ADD_WHITE_LIST 7
#define HCIC_PARAM_SIZE_REMOVE_WHITE_LIST 7
#define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS 14
#define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS 5
#define HCIC_PARAM_SIZE_READ_CHNL_MAP 2
#define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT 2
#define HCIC_PARAM_SIZE_BLE_ENCRYPT 32
#define HCIC_PARAM_SIZE_BLE_RAND 0
#define HCIC_PARAM_SIZE_WRITE_LE_HOST_SUPPORTED 2
#define HCIC_BLE_RAND_DI_SIZE 8
#define HCIC_BLE_ENCRYT_KEY_SIZE 16
#define HCIC_PARAM_SIZE_BLE_START_ENC (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYT_KEY_SIZE)
#define HCIC_PARAM_SIZE_LTK_REQ_REPLY (2 + HCIC_BLE_ENCRYT_KEY_SIZE)
#define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY 2
#define HCIC_BLE_CHNL_MAP_SIZE 5
#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA 31
/* ULP HCI command */
HCI_API extern BOOLEAN btsnd_hcic_ble_reset(void);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_evt_mask (BT_EVENT_MASK event_mask);
HCI_API extern BOOLEAN btsnd_hcic_ble_read_buffer_size (void);
HCI_API extern BOOLEAN btsnd_hcic_ble_read_local_spt_feat (void);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_local_used_feat (UINT8 feat_set[8]);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_random_addr (BD_ADDR random_addr);
HCI_API extern BOOLEAN btsnd_hcic_ble_write_adv_params (UINT16 adv_int_min, UINT16 adv_int_max,
UINT8 adv_type, UINT8 addr_type_own,
UINT8 addr_type_dir, BD_ADDR direct_bda,
UINT8 channel_map, UINT8 adv_filter_policy);
HCI_API extern BOOLEAN btsnd_hcic_ble_read_adv_chnl_tx_power (void);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_adv_data (UINT8 data_len, UINT8 *p_data);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_rsp_data (UINT8 data_len, UINT8 *p_scan_rsp);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_adv_enable (UINT8 adv_enable);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_params (UINT8 scan_type,
UINT16 scan_int, UINT16 scan_win,
UINT8 addr_type, UINT8 scan_filter_policy);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_enable (UINT8 scan_enable, UINT8 duplicate);
HCI_API extern BOOLEAN btsnd_hcic_ble_create_ll_conn (UINT16 scan_int, UINT16 scan_win,
UINT8 init_filter_policy, UINT8 addr_type_peer, BD_ADDR bda_peer, UINT8 addr_type_own,
UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout,
UINT16 min_ce_len, UINT16 max_ce_len);
HCI_API extern BOOLEAN btsnd_hcic_ble_create_conn_cancel (void);
HCI_API extern BOOLEAN btsnd_hcic_ble_read_white_list_size (void);
HCI_API extern BOOLEAN btsnd_hcic_ble_clear_white_list (void);
HCI_API extern BOOLEAN btsnd_hcic_ble_add_white_list (UINT8 addr_type, BD_ADDR bda);
HCI_API extern BOOLEAN btsnd_hcic_ble_remove_from_white_list (UINT8 addr_type, BD_ADDR bda);
HCI_API extern BOOLEAN btsnd_hcic_ble_upd_ll_conn_params (UINT16 handle, UINT16 conn_int_min, UINT16 conn_int_max,
UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_len, UINT16 max_len);
HCI_API extern BOOLEAN btsnd_hcic_ble_set_host_chnl_class (UINT8 chnl_map[HCIC_BLE_CHNL_MAP_SIZE]);
HCI_API extern BOOLEAN btsnd_hcic_ble_read_chnl_map (UINT16 handle);
HCI_API extern BOOLEAN btsnd_hcic_ble_read_remote_feat ( UINT16 handle);
HCI_API extern BOOLEAN btsnd_hcic_ble_encrypt (UINT8* key, UINT8 key_len, UINT8* plain_text, UINT8 pt_len, void *p_cmd_cplt_cback);
HCI_API extern BOOLEAN btsnd_hcic_ble_rand (void *p_cmd_cplt_cback);
HCI_API extern BOOLEAN btsnd_hcic_ble_start_enc ( UINT16 handle,
UINT8 rand[HCIC_BLE_RAND_DI_SIZE],
UINT16 ediv, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]);
HCI_API extern BOOLEAN btsnd_hcic_ble_ltk_req_reply (UINT16 handle, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]);
HCI_API extern BOOLEAN btsnd_hcic_ble_ltk_req_neg_reply (UINT16 handle);
HCI_API extern BOOLEAN btsnd_hcic_ble_read_supported_states (void);
HCI_API extern BOOLEAN btsnd_hcic_ble_write_host_supported (UINT8 le_host_spt, UINT8 simul_le_host_spt);
HCI_API extern BOOLEAN btsnd_hcic_ble_read_host_supported (void);
HCI_API extern BOOLEAN btsnd_hcic_ble_receiver_test(UINT8 rx_freq);
HCI_API extern BOOLEAN btsnd_hcic_ble_transmitter_test(UINT8 tx_freq, UINT8 test_data_len,
UINT8 payload);
HCI_API extern BOOLEAN btsnd_hcic_ble_test_end(void);
#endif /* BLE_INCLUDED */
#ifdef __cplusplus
}
#endif
#endif