blob: 05affed7e319ef0b70a17f0f24ff1404e50dac48 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2009-2013 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#ifndef GAP_API_H
#define GAP_API_H
#include "profiles_api.h"
#include "btm_api.h"
#include "l2c_api.h"
/*****************************************************************************
** Constants
*****************************************************************************/
/*** GAP Error and Status Codes ***/
#define GAP_UNSUPPORTED (GAP_ERR_GRP + 0x01) /* Unsupported call */
#define GAP_EOINQDB (GAP_ERR_GRP + 0x02) /* End of inquiry database marker */
#define GAP_ERR_BUSY (GAP_ERR_GRP + 0x03) /* The requested function was busy */
#define GAP_ERR_NO_CTRL_BLK (GAP_ERR_GRP + 0x04) /* No control blocks available */
#define GAP_ERR_STARTING_CMD (GAP_ERR_GRP + 0x05) /* Error occurred while initiating the command */
#define GAP_NO_BDADDR_REC (GAP_ERR_GRP + 0x06) /* No Inquiry DB record for BD_ADDR */
#define GAP_ERR_ILL_MODE (GAP_ERR_GRP + 0x07) /* An illegal mode parameter was detected */
#define GAP_ERR_ILL_INQ_TIME (GAP_ERR_GRP + 0x08) /* An illegal time parameter was detected */
#define GAP_ERR_ILL_PARM (GAP_ERR_GRP + 0x09) /* An illegal parameter was detected */
#define GAP_ERR_REM_NAME (GAP_ERR_GRP + 0x0a) /* Error starting the remote device name request */
#define GAP_CMD_INITIATED (GAP_ERR_GRP + 0x0b) /* The GAP command was started (result pending) */
#define GAP_DEVICE_NOT_UP (GAP_ERR_GRP + 0x0c) /* The device was not up; the request was not executed */
#define GAP_BAD_BD_ADDR (GAP_ERR_GRP + 0x0d) /* The bd addr passed in was not found or invalid */
#define GAP_ERR_BAD_HANDLE (GAP_ERR_GRP + 0x0e) /* Bad GAP handle */
#define GAP_ERR_BUF_OFFSET (GAP_ERR_GRP + 0x0f) /* Buffer offset invalid */
#define GAP_ERR_BAD_STATE (GAP_ERR_GRP + 0x10) /* Connection is in invalid state */
#define GAP_NO_DATA_AVAIL (GAP_ERR_GRP + 0x11) /* No data available */
#define GAP_ERR_CONGESTED (GAP_ERR_GRP + 0x12) /* BT stack is congested */
#define GAP_ERR_SECURITY (GAP_ERR_GRP + 0x13) /* Security failed */
#define GAP_ERR_PROCESSING (GAP_ERR_GRP + 0x14) /* General error processing BTM request */
#define GAP_ERR_TIMEOUT (GAP_ERR_GRP + 0x15) /* Timeout occurred while processing cmd */
/** GAP Events - definitions of GAP return events ***/
#define GAP_EVT_INQUIRY_RESULTS 0x0001
#define GAP_EVT_INQUIRY_COMPLETE 0x0002
#define GAP_EVT_DISCOVERY_COMPLETE 0x0003
#define GAP_EVT_REM_NAME_COMPLETE 0x0004
#define GAP_EVT_FIND_ADDR_COMPLETE 0x0005
#define GAP_EVT_CONN_OPENED 0x0100
#define GAP_EVT_CONN_CLOSED 0x0101
#define GAP_EVT_CONN_DATA_AVAIL 0x0102
#define GAP_EVT_CONN_CONGESTED 0x0103
#define GAP_EVT_CONN_UNCONGESTED 0x0104
/* Values for 'chan_mode_mask' field */
/* GAP_ConnOpen() - optional channels to negotiate */
#define GAP_FCR_CHAN_OPT_BASIC L2CAP_FCR_CHAN_OPT_BASIC
#define GAP_FCR_CHAN_OPT_ERTM L2CAP_FCR_CHAN_OPT_ERTM
#define GAP_FCR_CHAN_OPT_STREAM L2CAP_FCR_CHAN_OPT_STREAM
/*** discovery of devices ***/
#define GAP_INQUIRY_NONE BTM_INQUIRY_NONE
#define GAP_GENERAL_INQUIRY BTM_GENERAL_INQUIRY
#define GAP_LIMITED_INQUIRY BTM_LIMITED_INQUIRY
#if BLE_INCLUDED == TRUE
#define GAP_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE
#define GAP_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY
#define GAP_BLE_LIMITED_INQUIRY BTM_BLE_LIMITED_INQUIRY
#endif
/*** discoverable modes ***/
#define GAP_NON_DISCOVERABLE BTM_NON_DISCOVERABLE
#define GAP_LIMITED_DISCOVERABLE BTM_LIMITED_DISCOVERABLE
#define GAP_GENERAL_DISCOVERABLE BTM_GENERAL_DISCOVERABLE
/*** Inquiry Filter Condition types (The values are defined in btm_api.h) ***/
#define GAP_CLR_INQUIRY_FILTER BTM_CLR_INQUIRY_FILTER /* Inquiry Filtering is turned off */
#define GAP_FILTER_COND_DEVICE_CLASS BTM_FILTER_COND_DEVICE_CLASS /* Filter on device class */
#define GAP_FILTER_COND_BD_ADDR BTM_FILTER_COND_BD_ADDR /* Filter on device addr */
/*** connectability ***/
#define GAP_NON_CONNECTABLE BTM_NON_CONNECTABLE
#define GAP_CONNECTABLE BTM_CONNECTABLE
/*** security features ***/
#define GAP_DISALLOW_PAIRING 0
#define GAP_ALLOW_PAIRING 1
/*** class of device settings ***/
#define GAP_SET_COD_MAJOR_MINOR 0x01
#define GAP_SET_COD_SERVICE_CLASS 0x02 /* only set the bits in the input */
#define GAP_CLR_COD_SERVICE_CLASS 0x04
#define GAP_SET_COD_ALL 0x08 /* take service class as the input (may clear some set bits!!) */
#define GAP_INIT_COD 0x0a
/*** used in connection variables and functions ***/
#define GAP_INVALID_HANDLE 0xFFFF
/* This is used to change the criteria for AMP */
#define GAP_PROTOCOL_ID (UUID_PROTOCOL_UDP)
/* slave preferred parameter, minimum connection interval */
#ifndef GAP_SL_CONN_INT_MIN
#define GAP_SL_CONN_INT_MIN 6
#endif
/* slave preferred parameter, maximum connection interval */
#ifndef GAP_SL_CONN_INT_MAX
#define GAP_SL_CONN_INT_MAX 20
#endif
/* slave preferred parameter */
#ifndef GAP_SL_LATENCY
#define GAP_SL_LATENCY 2
#endif
#ifndef GAP_BLE_PRIVACY_RECONN_ADDR_PERM
#define GAP_BLE_PRIVACY_RECONN_ADDR_PERM (GATT_PERM_READ|GATT_PERM_WRITE)
#endif
#ifndef GAP_PREFER_CONN_INT_MAX
#define GAP_PREFER_CONN_INT_MAX BTM_BLE_CONN_INT_MIN
#endif
#ifndef GAP_PREFER_CONN_INT_MIN
#define GAP_PREFER_CONN_INT_MIN BTM_BLE_CONN_INT_MIN
#endif
#ifndef GAP_PREFER_CONN_LATENCY
#define GAP_PREFER_CONN_LATENCY 0
#endif
#ifndef GAP_PREFER_CONN_SP_TOUT
#define GAP_PREFER_CONN_SP_TOUT 2000
#endif
#if BLE_INCLUDED == TRUE
#ifndef GAP_TRANSPORT_SUPPORTED
#define GAP_TRANSPORT_SUPPORTED GATT_TRANSPORT_LE_BR_EDR
#endif
#endif
/*****************************************************************************
** Type Definitions
*****************************************************************************/
/*
** Callback function for connection services
*/
typedef void (tGAP_CONN_CALLBACK) (UINT16 gap_handle, UINT16 event);
/*
** Define the callback function prototypes. Parameters are specific
** to each event and are described below
*/
typedef void (tGAP_CALLBACK) (UINT16 event, void *p_data);
typedef tBTM_REMOTE_DEV_NAME tGAP_REMOTE_DEV_NAME; /* see btm_api.h */
typedef tBTM_INQ_PARMS tGAP_INQ_PARMS; /* see btm_api.h */
typedef tBTM_INQ_RESULTS tGAP_INQ_RESULTS; /* see btm_api.h */
/* Inquiry results structure */
typedef struct
{
UINT16 status;
UINT8 num_results;
} tGAP_INQ_CMPL;
/* Definition of the GAP_FindAddrByName results structure */
typedef struct
{
UINT16 status;
BD_ADDR bd_addr;
tBTM_BD_NAME devname;
} tGAP_FINDADDR_RESULTS;
/** for GAP_SetDeviceClass() **/
/* Define Class of Device related values
*
* >>> changes to this type need to also be made to tHSP_COD in hsp2_int.h
*/
typedef struct
{
UINT8 minor;
UINT8 major;
UINT16 service;
} tGAP_COD;
/*** Constants and functions for device features ***/
typedef struct
{
UINT8 lmp_version;
UINT16 mfc_name;
UINT16 lmp_subversion;
} tGAP_LMP_VERSION;
typedef struct
{
UINT8 lmp_features[8];
} tGAP_LMP_FEATURES;
typedef struct
{
UINT16 int_min;
UINT16 int_max;
UINT16 latency;
UINT16 sp_tout;
}tGAP_BLE_PREF_PARAM;
typedef union
{
tGAP_BLE_PREF_PARAM conn_param;
BD_ADDR reconn_bda;
UINT16 icon;
UINT8 *p_dev_name;
UINT8 privacy;
}tGAP_BLE_ATTR_VALUE;
typedef void (tGAP_BLE_DEV_NAME_CBACK)(BOOLEAN status, BD_ADDR addr, UINT16 length, char *p_name);
typedef void (tGAP_BLE_RECONN_ADDR_CBACK)(BOOLEAN status, BD_ADDR addr, BD_ADDR reconn_bda);
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
**
** Function GAP_SetDiscoverableMode
**
** Description This function is called to allow or disallow a service to
** discovered (Inquiry Scans).
**
** Returns BT_PASS (0) if successful,
** GAP_ERR_ILL_PARM if a bad parameter is detected,
** GAP_DEVICE_NOT_UP if the device is not active,
** GAP_ERR_PROCESSING if not enough resources to carry out request
**
*******************************************************************************/
GAP_API extern UINT16 GAP_SetDiscoverableMode (UINT16 mode, UINT16 duration,
UINT16 interval);
/*******************************************************************************
**
** Function GAP_ReadDiscoverableMode
**
** Description This function is called to retrieve the current discoverable
** mode for the local device.
**
** Returns GAP_NON_DISCOVERABLE, GAP_LIMITED_DISCOVERABLE, or
** GAP_GENERAL_DISCOVERABLE
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ReadDiscoverableMode (UINT16 *duration, UINT16 *interval);
/*******************************************************************************
**
** Function GAP_StartInquiry
**
** Description This function initiates a single inquiry.
**
** Returns BT_PASS (0) if successful,
** GAP_ERR_ILL_MODE if a bad mode parameter was passed
** GAP_ERR_ILL_INQ_TIME if a bad interval or duration was passed
** GAP_ERR_NO_CTRL_BLK if out of control blocks
** GAP_ERR_ILL_PARM if a bad parameter was detected in BTM
** GAP_ERR_BUSY if the device already has an iquiry active
** GAP_DEVICE_NOT_UP if the device is not initialized yet
** GAP_ERR_PROCESSING if any other BTM error was returned
**
*******************************************************************************/
GAP_API extern UINT16 GAP_StartInquiry (tGAP_INQ_PARMS *p_inq_parms,
tGAP_CALLBACK *p_results_cb,
tGAP_CALLBACK *p_cmpl_cb);
/*******************************************************************************
**
** Function GAP_StartPeriodicInquiry
**
** Description This function initiates a periodic inquiry.
**
** Returns BT_PASS (0) if successful,
** GAP_ERR_ILL_MODE if a bad mode parameter was passed
** GAP_ERR_ILL_INQ_TIME if a bad interval or duration was passed
** GAP_ERR_NO_CTRL_BLK if out of control blocks
** GAP_ERR_ILL_PARM if a bad parameter was detected in BTM
** GAP_ERR_BUSY if the device already has an iquiry active
** GAP_DEVICE_NOT_UP if the device is not initialized yet
** GAP_ERR_PROCESSING if any other BTM error was returned
**
*******************************************************************************/
GAP_API extern UINT16 GAP_StartPeriodicInquiry (tGAP_INQ_PARMS *p_inq_parms,
UINT16 min_time,
UINT16 max_time,
tGAP_CALLBACK *p_results_cb);
/*******************************************************************************
**
** Function GAP_CancelInquiry
**
** Description This function cancels a single inquiry (if in progress)
**
** Returns BOOLEAN (TRUE if successful, otherwise FALSE)
**
*******************************************************************************/
GAP_API extern UINT16 GAP_CancelInquiry(void);
/*******************************************************************************
**
** Function GAP_CancelPeriodicInquiry
**
** Description This function cancels a periodic inquiry (if in progress)
**
** Returns BOOLEAN: (TRUE if successful, otherwise FALSE)
**
*******************************************************************************/
GAP_API extern UINT16 GAP_CancelPeriodicInquiry(void);
/*******************************************************************************
**
** Function GAP_GetFirstInquiryResult
**
** Description This function retrieves the first valid inquiry result.
**
** Returns BT_PASS (0) if successful, or a non-zero error code
** GAP_EOINQDB if no more entries in the database.
**
*******************************************************************************/
GAP_API extern UINT16 GAP_GetFirstInquiryResult(tGAP_INQ_RESULTS *p_results);
/*******************************************************************************
**
** Function GAP_GetNextInquiryResult
**
** Description This function retrieves the next valid inquiry result.
**
** Returns BT_PASS (0) if successful, or a non-zero status code
** GAP_EOINQDB if no more entries in the database.
**
*******************************************************************************/
GAP_API extern UINT16 GAP_GetNextInquiryResult(tGAP_INQ_RESULTS *p_results);
/*******************************************************************************
**
** Function GAP_FindAddrByName
**
** Description This function is called to retrieve a device address given
** a device name. It first looks in the current local inquiry
** database for the device with the specified name. If not found
** it initiates a general inquiry. Upon completion, it retrieves
** the name for each device until a match is found or all devices
** have been checked. Note: This process can take a while to
** complete.
**
** Returns BT_PASS if the name was immediately available. (BD_ADDR is returned)
** GAP_CMD_INITIATED if an inquiry has been initiated
**
*******************************************************************************/
GAP_API extern UINT16 GAP_FindAddrByName (BD_NAME devname,
tGAP_INQ_PARMS *p_inq_parms,
tGAP_CALLBACK *p_addr_cb,
BD_ADDR bd_addr);
/*******************************************************************************
**
** Function GAP_SetConnectableMode
**
** Description This function is called to allow or disallow a
** connections on the local device.
**
** Returns BT_PASS (0) if successful,
** GAP_ERR_ILL_PARM if a bad parameter is detected,
** GAP_DEVICE_NOT_UP if the device is not active,
** GAP_ERR_PROCESSING if not enough resources to carry out request
**
*******************************************************************************/
GAP_API extern UINT16 GAP_SetConnectableMode (UINT16 mode, UINT16 duration,
UINT16 interval);
/*******************************************************************************
**
** Function GAP_ReadConnectableMode
**
** Description This function is called to retrieve the current connectability
** mode for the local device.
**
** Returns GAP_NON_CONNECTABLE, GAP_CONNECTABLE
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ReadConnectableMode (UINT16 *duration, UINT16 *interval);
/*******************************************************************************
**
** Function GAP_SetSecurityMode
**
** Description Set security mode for the device (Service or Link level)
**
** Returns void
**
*******************************************************************************/
GAP_API extern void GAP_SetSecurityMode (UINT8 sec_mode);
/*******************************************************************************
**
** Function GAP_SecRegister
**
** Description Application calls this function to register for
** security services.
**
** Returns TRUE if registered OK, else FALSE
**
*******************************************************************************/
GAP_API extern BOOLEAN GAP_SecRegister (tBTM_APPL_INFO *p_cb_info);
/*******************************************************************************
**
** Function GAP_SetPairableMode
**
** Description This function is called to allow or disallow pairing
** on the local device.
**
** Returns BT_PASS (0) if successful, or a non-zero error code
**
*******************************************************************************/
GAP_API extern UINT16 GAP_SetPairableMode (UINT16 mode, BOOLEAN connect_only_paired);
/*******************************************************************************
**
** Function GAP_Bond
**
** Description This function is called to initiate bonding with peer device
**
** Returns tBTM_STATUS - BTM_CMD_STARTED of successfully initiated
**
*******************************************************************************/
GAP_API extern UINT8 GAP_Bond (BD_ADDR bd_addr, UINT8 pin_len, UINT8 *p_pin, UINT32 trusted_mask[]);
/*******************************************************************************
**
** Function GAP_PinRsp
**
** Description This function is called from UI after Security Manager submitted
** PIN code request.
**
** Returns void
**
*******************************************************************************/
GAP_API extern void GAP_PinRsp (BD_ADDR bd_addr, UINT8 res, UINT8 pin_len,
UINT8 *p_pin, UINT32 trusted_mask[]);
/*******************************************************************************
**
** Function GAP_AuthorizeRsp
**
** Description This function is called from UI after Security Manager submitted
** an authorization request.
**
** Returns void
**
*******************************************************************************/
GAP_API extern void GAP_AuthorizeRsp (BD_ADDR bd_addr, UINT8 res,
UINT32 trusted_mask[]);
/*******************************************************************************
**
** Function GAP_SetDeviceClass
**
** Description This function updates the local Device Class.
**
** Returns BT_PASS (0) if successful,
** GAP_ERR_BUSY if a discovery is already in progress
** GAP_ERR_ILL_PARM if an illegal parameter was detected
** GAP_ERR_PROCESSING if any other BTM error has been returned
**
*******************************************************************************/
GAP_API extern UINT16 GAP_SetDeviceClass(tGAP_COD *p_cod, UINT8 cmd);
/*******************************************************************************
**
** Function GAP_ReadDeviceClass
**
** Description This function reads the current local Device Class setting.
**
** Returns BT_PASS
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ReadDeviceClass(tGAP_COD *p_cod);
/*******************************************************************************
**
** Function GAP_ReadLocalDeviceInfo
**
** Description This function retrieves local device information to the caller.
** NOTE: Return parameters that are set to NULL are not retrieved.
**
** Returns BT_PASS (0) if successful, or a non-zero error code
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ReadLocalDeviceInfo( UINT8 *name, BD_ADDR *addr,
tGAP_LMP_VERSION *verinfo,
tGAP_LMP_FEATURES *features);
/*******************************************************************************
**
** Function GAP_GetRemoteDeviceName
**
** Description The remote name is retrieved from the specified remote device. If
** GAP_CMD_INITIATED is returned by the function, the command was
** successfully sent to the controller. The GAP_EVT_NAME_RESP event
** is passed in the callback when the remote device name has been retrieved.
**
** Returns
** GAP_CMD_INITIATED if remote search successfully initiated
** GAP_ERR_BUSY if a remote name request is already in progress,
** GAP_ERR_NO_CTRL_BLK if out of control blocks (too many commands pending)
** GAP_BAD_BD_ADDR if the device address is bad,
** GAP_DEVICE_NOT_UP if the device has not been initialized yet
** GAP_ERR_PROCESSING if any other BTM error has been returned
**
*******************************************************************************/
GAP_API extern UINT16 GAP_GetRemoteDeviceName (BD_ADDR addr, tGAP_CALLBACK *callback);
/*** Functions for L2CAP connection interface ***/
/*******************************************************************************
**
** Function GAP_ConnOpen
**
** Description This function is called to open a generic L2CAP connection.
**
** Returns handle of the connection if successful, else GAP_INVALID_HANDLE
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnOpen (char *p_serv_name, UINT8 service_id, BOOLEAN is_server,
BD_ADDR p_rem_bda, UINT16 psm, tL2CAP_CFG_INFO *p_cfg,
UINT16 security, UINT8 chan_mode_mask, tGAP_CONN_CALLBACK *p_cb);
/*******************************************************************************
**
** Function GAP_ConnClose
**
** Description This function is called to close a connection.
**
** Returns BT_PASS - closed OK
** GAP_ERR_BAD_HANDLE - invalid handle
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnClose (UINT16 gap_handle);
/*******************************************************************************
**
** Function GAP_ConnReadData
**
** Description GKI buffer unaware application will call this function
** after receiving GAP_EVT_RXDATA event. A data copy is made
** into the receive buffer parameter.
**
** Returns BT_PASS - data read
** GAP_ERR_BAD_HANDLE - invalid handle
** GAP_NO_DATA_AVAIL - no data available
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnReadData (UINT16 gap_handle, UINT8 *p_data,
UINT16 max_len, UINT16 *p_len);
/*******************************************************************************
**
** Function GAP_GetRxQueueCnt
**
** Description This function return number of bytes on the rx queue.
**
** Parameters: handle - Handle returned in the GAP_ConnOpen
** p_rx_queue_count - Pointer to return queue count in.
**
**
*******************************************************************************/
GAP_API extern int GAP_GetRxQueueCnt (UINT16 handle, UINT32 *p_rx_queue_count);
/*******************************************************************************
**
** Function GAP_ConnBTRead
**
** Description GKI buffer aware applications will call this function after
** receiving an GAP_EVT_RXDATA event to process the incoming
** data buffer.
**
** Returns BT_PASS - data read
** GAP_ERR_BAD_HANDLE - invalid handle
** GAP_NO_DATA_AVAIL - no data available
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnBTRead (UINT16 gap_handle, BT_HDR **pp_buf);
/*******************************************************************************
**
** Function GAP_ConnBTWrite
**
** Description GKI buffer aware applications can call this function to write data
** by passing a pointer to the GKI buffer of data.
**
** Returns BT_PASS - data read
** GAP_ERR_BAD_HANDLE - invalid handle
** GAP_ERR_BAD_STATE - connection not established
** GAP_INVALID_BUF_OFFSET - buffer offset is invalid
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnBTWrite (UINT16 gap_handle, BT_HDR *p_buf);
/*******************************************************************************
**
** Function GAP_ConnWriteData
**
** Description GKI buffer unaware application will call this function
** to send data to the connection. A data copy is made into a GKI
** buffer.
**
** Returns BT_PASS - data read
** GAP_ERR_BAD_HANDLE - invalid handle
** GAP_ERR_BAD_STATE - connection not established
** GAP_CONGESTION - system is congested
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnWriteData (UINT16 gap_handle, UINT8 *p_data,
UINT16 max_len, UINT16 *p_len);
/*******************************************************************************
**
** Function GAP_ConnReconfig
**
** Description Applications can call this function to reconfigure the connection.
**
** Returns BT_PASS - config process started
** GAP_ERR_BAD_HANDLE - invalid handle
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnReconfig (UINT16 gap_handle, tL2CAP_CFG_INFO *p_cfg);
/*******************************************************************************
**
** Function GAP_ConnSetIdleTimeout
**
** Description Higher layers call this function to set the idle timeout for
** a connection, or for all future connections. The "idle timeout"
** is the amount of time that a connection can remain up with
** no L2CAP channels on it. A timeout of zero means that the
** connection will be torn down immediately when the last channel
** is removed. A timeout of 0xFFFF means no timeout. Values are
** in seconds.
**
** Returns BT_PASS - config process started
** GAP_ERR_BAD_HANDLE - invalid handle
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnSetIdleTimeout (UINT16 gap_handle, UINT16 timeout);
/*******************************************************************************
**
** Function GAP_ConnGetRemoteAddr
**
** Description This function is called to get the remote BD address
** of a connection.
**
** Returns BT_PASS - closed OK
** GAP_ERR_BAD_HANDLE - invalid handle
**
*******************************************************************************/
GAP_API extern UINT8 *GAP_ConnGetRemoteAddr (UINT16 gap_handle);
/*******************************************************************************
**
** Function GAP_ConnGetRemMtuSize
**
** Description Returns the remote device's MTU size.
**
** Returns UINT16 - maximum size buffer that can be transmitted to the peer
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnGetRemMtuSize (UINT16 gap_handle);
/*******************************************************************************
**
** Function GAP_ConnGetL2CAPCid
**
** Description Returns the L2CAP channel id
**
** Parameters: handle - Handle of the connection
**
** Returns UINT16 - The L2CAP channel id
** 0, if error
**
*******************************************************************************/
GAP_API extern UINT16 GAP_ConnGetL2CAPCid (UINT16 gap_handle);
/*******************************************************************************
**
** Function GAP_SetTraceLevel
**
** Description This function sets the trace level for GAP. If called with
** a value of 0xFF, it simply returns the current trace level.
**
** Returns The new or current trace level
**
*******************************************************************************/
GAP_API extern UINT8 GAP_SetTraceLevel (UINT8 new_level);
/*******************************************************************************
**
** Function GAP_Init
**
** Description Initializes the control blocks used by GAP.
** This routine should not be called except once per
** stack invocation.
**
** Returns Nothing
**
*******************************************************************************/
GAP_API extern void GAP_Init(void);
#if (BLE_INCLUDED == TRUE)
/*******************************************************************************
**
** Function GAP_BleAttrDBUpdate
**
** Description update GAP local BLE attribute database.
**
** Returns Nothing
**
*******************************************************************************/
GAP_API extern void GAP_BleAttrDBUpdate(UINT16 attr_uuid, tGAP_BLE_ATTR_VALUE *p_value);
/*******************************************************************************
**
** Function GAP_BleReadPeerPrefConnParams
**
** Description Start a process to read a connected peripheral's preferred
** connection parameters
**
** Returns TRUE if read started, else FALSE if GAP is busy
**
*******************************************************************************/
GAP_API extern BOOLEAN GAP_BleReadPeerPrefConnParams (BD_ADDR peer_bda);
/*******************************************************************************
**
** Function GAP_BleReadPeerDevName
**
** Description Start a process to read a connected peripheral's device name.
**
** Returns TRUE if request accepted
**
*******************************************************************************/
GAP_API extern BOOLEAN GAP_BleReadPeerDevName (BD_ADDR peer_bda, tGAP_BLE_DEV_NAME_CBACK *p_cback);
/*******************************************************************************
**
** Function GAP_BleCancelReadPeerDevName
**
** Description Cancel reading a peripheral's device name.
**
** Returns TRUE if request accepted
**
*******************************************************************************/
GAP_API extern BOOLEAN GAP_BleCancelReadPeerDevName (BD_ADDR peer_bda);
/*******************************************************************************
**
** Function GAP_BleUpdateReconnectAddr
**
** Description Start a process to udpate the reconnect address if remote devive
** has privacy enabled.
**
** Returns TRUE if read started, else FALSE if GAP is busy
**
*******************************************************************************/
GAP_API extern BOOLEAN GAP_BleUpdateReconnectAddr (BD_ADDR peer_bda,
BD_ADDR reconn_addr,
tGAP_BLE_RECONN_ADDR_CBACK *p_cback);
#endif
#ifdef __cplusplus
}
#endif
#endif /* GAP_API_H */