blob: b86968d7100188fca6fd8116e7515567f962a552 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains the Bluetooth Manager (BTM) API function external
* definitions.
*
******************************************************************************/
#ifndef BTM_BLE_API_H
#define BTM_BLE_API_H
#include "btm_api.h"
#define CHNL_MAP_LEN 5
typedef UINT8 tBTM_BLE_CHNL_MAP[CHNL_MAP_LEN];
#define BTM_BLE_CONNECT_EVT 0x00
#define BTM_BLE_CONNECT_DIR_EVT 0x01
#define BTM_BLE_DISCOVER_EVT 0x02
#define BTM_BLE_NON_CONNECT_EVT 0x03
#define BTM_BLE_SCAN_RSP_EVT 0x04
#define BTM_BLE_SCAN_REQ_EVT 0x06
#define BTM_BLE_UNKNOWN_EVT 0xff
#define BTM_BLE_UNKNOWN_EVT 0xff
#define BTM_BLE_SCAN_MODE_PASS 0
#define BTM_BLE_SCAN_MODE_ACTI 1
#define BTM_BLE_SCAN_MODE_NONE 0xff
typedef UINT8 tBTM_BLE_SCAN_MODE;
/* advertising channel map */
#define BTM_BLE_ADV_CHNL_37 (0x01 << 0)
#define BTM_BLE_ADV_CHNL_38 (0x01 << 1)
#define BTM_BLE_ADV_CHNL_39 (0x01 << 2)
typedef UINT8 tBTM_BLE_ADV_CHNL_MAP;
/*d efault advertising channel map */
#ifndef BTM_BLE_DEFAULT_ADV_CHNL_MAP
#define BTM_BLE_DEFAULT_ADV_CHNL_MAP (BTM_BLE_ADV_CHNL_37| BTM_BLE_ADV_CHNL_38| BTM_BLE_ADV_CHNL_39)
#endif
/* advertising filter policy */
#define AP_SCAN_CONN_ALL 0x00 /* default */
#define AP_SCAN_WL_CONN_ALL 0x01
#define AP_SCAN_ALL_CONN_WL 0x02
#define AP_SCAN_CONN_WL 0x03
#define AP_SCAN_CONN_POLICY_MAX 0x04
typedef UINT8 tBTM_BLE_AFP;
/* default advertising filter policy */
#ifndef BTM_BLE_DEFAULT_AFP
#define BTM_BLE_DEFAULT_AFP AP_SCAN_CONN_ALL
#endif
/* scanning filter policy */
#define SP_ADV_ALL 0x00 /* accept adv pakt from all, directed adv pkt not directed to me is ignored */
#define SP_ADV_WL 0x01 /* accept adv pakt from device in white list, directed adv pkt not directed to me is ignored */
typedef UINT8 tBTM_BLE_SFP;
#ifndef BTM_BLE_DEFAULT_SFP
#define BTM_BLE_DEFAULT_SFP SP_ADV_ALL
#endif
/* adv parameter boundary values */
#define BTM_BLE_ADV_INT_MIN 0x0020
#define BTM_BLE_ADV_INT_MAX 0x4000
/* connection parameter boundary values */
#define BTM_BLE_SCAN_INT_MIN 0x0004
#define BTM_BLE_SCAN_INT_MAX 0x4000
#define BTM_BLE_SCAN_WIN_MIN 0x0004
#define BTM_BLE_SCAN_WIN_MAX 0x4000
#define BTM_BLE_CONN_INT_MIN 0x0006
#define BTM_BLE_CONN_INT_MAX 0x0C80
#define BTM_BLE_CONN_LATENCY_MAX 500
#define BTM_BLE_CONN_SUP_TOUT_MIN 0x000A
#define BTM_BLE_CONN_SUP_TOUT_MAX 0x0C80
#define BTM_BLE_CONN_PARAM_UNDEF 0xffff /* use this value when a specific value not to be overwritten */
#define BTM_BLE_CONN_SUP_TOUT_DEF 700
/* default connection parameters if not configured, use GAP recommend value for auto/selective connection */
/* default scan interval */
#ifndef BTM_BLE_SCAN_FAST_INT
#define BTM_BLE_SCAN_FAST_INT 96 /* 30 ~ 60 ms (use 60) = 96 *0.625 */
#endif
/* default scan window for background connection, applicable for auto connection or selective conenction */
#ifndef BTM_BLE_SCAN_FAST_WIN
#define BTM_BLE_SCAN_FAST_WIN 48 /* 30 ms = 48 *0.625 */
#endif
/* default scan paramter used in reduced power cycle (background scanning) */
#ifndef BTM_BLE_SCAN_SLOW_INT_1
#define BTM_BLE_SCAN_SLOW_INT_1 2048 /* 1.28 s = 2048 *0.625 */
#endif
#ifndef BTM_BLE_SCAN_SLOW_WIN_1
#define BTM_BLE_SCAN_SLOW_WIN_1 18 /* 11.25 ms = 18 *0.625 */
#endif
/* default scan paramter used in reduced power cycle (background scanning) */
#ifndef BTM_BLE_SCAN_SLOW_INT_2
#define BTM_BLE_SCAN_SLOW_INT_2 4096 /* 2.56 s = 4096 *0.625 */
#endif
#ifndef BTM_BLE_SCAN_SLOW_WIN_2
#define BTM_BLE_SCAN_SLOW_WIN_2 36 /* 22.5 ms = 36 *0.625 */
#endif
/* default connection interval min */
#ifndef BTM_BLE_CONN_INT_MIN_DEF
#define BTM_BLE_CONN_INT_MIN_DEF 24 /* recommended min: 30ms = 24 * 1.25 */
#endif
/* default connectino interval max */
#ifndef BTM_BLE_CONN_INT_MAX_DEF
#define BTM_BLE_CONN_INT_MAX_DEF 40 /* recommended max: 50 ms = 56 * 1.25 */
#endif
/* default slave latency */
#ifndef BTM_BLE_CONN_SLAVE_LATENCY_DEF
#define BTM_BLE_CONN_SLAVE_LATENCY_DEF 0 /* 0 */
#endif
/* default supervision timeout */
#ifndef BTM_BLE_CONN_TIMEOUT_DEF
#define BTM_BLE_CONN_TIMEOUT_DEF 2000
#endif
#define BTM_BLE_DIR_CONN_FALLBACK_UNDIR 1
#define BTM_BLE_DIR_CONN_FALLBACK_NO_ADV 2
#ifndef BTM_BLE_DIR_CONN_FALLBACK
#define BTM_BLE_DIR_CONN_FALLBACK BTM_BLE_DIR_CONN_FALLBACK_UNDIR
#endif
#define BTM_CMAC_TLEN_SIZE 8 /* 64 bits */
#define BTM_BLE_AUTH_SIGN_LEN 12 /* BLE data signature length 8 Bytes + 4 bytes counter*/
typedef UINT8 BLE_SIGNATURE[BTM_BLE_AUTH_SIGN_LEN]; /* Device address */
#ifndef BTM_BLE_HOST_SUPPORT
#define BTM_BLE_HOST_SUPPORT 0x01
#endif
#ifndef BTM_BLE_SIMULTANEOUS_HOST
#define BTM_BLE_SIMULTANEOUS_HOST 0x01
#endif
/* Structure returned with Rand/Encrypt complete callback */
typedef struct
{
UINT8 status;
UINT8 param_len;
UINT16 opcode;
UINT8 param_buf[BT_OCTET16_LEN];
} tBTM_RAND_ENC;
/* General callback function for notifying an application that a synchronous
** BTM function is complete. The pointer contains the address of any returned data.
*/
typedef void (tBTM_RAND_ENC_CB) (tBTM_RAND_ENC *p1);
#define BTM_BLE_FILTER_TARGET_SCANNER 0x01
#define BTM_BLE_FILTER_TARGET_ADVR 0x00
#define BTM_BLE_POLICY_BLACK_ALL 0x00 /* relevant to both */
#define BTM_BLE_POLICY_ALLOW_SCAN 0x01 /* relevant to advertiser */
#define BTM_BLE_POLICY_ALLOW_CONN 0x02 /* relevant to advertiser */
#define BTM_BLE_POLICY_WHITE_ALL 0x03 /* relevant to both */
typedef struct
{
UINT8 adv_int_min;
UINT8 adv_int_max;
tBTM_BLE_CHNL_MAP chnl_map;
}tBTM_BLE_ADV_PARAMS;
/* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */
#define BTM_BLE_LIMIT_DISC_FLAG (0x01 << 0)
#define BTM_BLE_GEN_DISC_FLAG (0x01 << 1)
#define BTM_BLE_BREDR_NOT_SPT (0x01 << 2)
#define BTM_BLE_NON_LIMIT_DISC_FLAG (0x00 ) /* lowest bit unset */
#define BTM_BLE_ADV_FLAG_MASK (BTM_BLE_LIMIT_DISC_FLAG | BTM_BLE_BREDR_NOT_SPT | BTM_BLE_GEN_DISC_FLAG)
#define BTM_BLE_LIMIT_DISC_MASK (BTM_BLE_LIMIT_DISC_FLAG )
#define BTM_BLE_AD_BIT_DEV_NAME (0x0001 << 0)
#define BTM_BLE_AD_BIT_FLAGS (0x0001 << 1)
#define BTM_BLE_AD_BIT_MANU (0x0001 << 2)
#define BTM_BLE_AD_BIT_TX_PWR (0x0001 << 3)
#define BTM_BLE_AD_BIT_INT_RANGE (0x0001 << 5)
#define BTM_BLE_AD_BIT_SERVICE (0x0001 << 6)
#define BTM_BLE_AD_BIT_SERVICE_SOL (0x0001 << 7)
#define BTM_BLE_AD_BIT_SERVICE_DATA (0x0001 << 8)
#define BTM_BLE_AD_BIT_SIGN_DATA (0x0001 << 9)
#define BTM_BLE_AD_BIT_SERVICE_128SOL (0x0001 << 10)
#define BTM_BLE_AD_BIT_APPEARANCE (0x0001 << 11)
#define BTM_BLE_AD_BIT_PUBLIC_ADDR (0x0001 << 12)
#define BTM_BLE_AD_BIT_RANDOM_ADDR (0x0001 << 13)
#define BTM_BLE_AD_BIT_PROPRIETARY (0x0001 << 15)
typedef UINT16 tBTM_BLE_AD_MASK;
#define BTM_BLE_AD_TYPE_FLAG HCI_EIR_FLAGS_TYPE /* 0x01 */
#define BTM_BLE_AD_TYPE_16SRV_PART HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */
#define BTM_BLE_AD_TYPE_16SRV_CMPL HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */
#define BTM_BLE_AD_TYPE_32SRV_PART HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */
#define BTM_BLE_AD_TYPE_32SRV_CMPL HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */
#define BTM_BLE_AD_TYPE_128SRV_PART HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */
#define BTM_BLE_AD_TYPE_128SRV_CMPL HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */
#define BTM_BLE_AD_TYPE_NAME_SHORT HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */
#define BTM_BLE_AD_TYPE_NAME_CMPL HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */
#define BTM_BLE_AD_TYPE_TX_PWR HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */
#define BTM_BLE_AD_TYPE_DEV_CLASS 0x0D
#define BTM_BLE_AD_TYPE_SM_TK 0x10
#define BTM_BLE_AD_TYPE_SM_OOB_FLAG 0x11
#define BTM_BLE_AD_TYPE_INT_RANGE 0x12
#define BTM_BLE_AD_TYPE_SOL_SRV_UUID 0x14
#define BTM_BLE_AD_TYPE_128SOL_SRV_UUID 0x15
#define BTM_BLE_AD_TYPE_SERVICE_DATA 0x16
#define BTM_BLE_AD_TYPE_PUBLIC_TARGET 0x17
#define BTM_BLE_AD_TYPE_RANDOM_TARGET 0x18
#define BTM_BLE_AD_TYPE_APPEARANCE 0x19
#define BTM_BLE_AD_TYPE_MANU HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xff */
typedef UINT8 tBTM_BLE_AD_TYPE;
/* slave preferred connection interval range */
typedef struct
{
UINT16 low;
UINT16 hi;
}tBTM_BLE_INT_RANGE;
/* Service tag supported in the device */
typedef struct
{
UINT8 num_service;
BOOLEAN list_cmpl;
UINT16 *p_uuid;
}tBTM_BLE_SERVICE;
typedef struct
{
UINT8 len;
UINT8 *p_val;
}tBTM_BLE_MANU;
typedef struct
{
UINT8 adv_type;
UINT8 len;
UINT8 *p_val; /* number of len byte */
}tBTM_BLE_PROP_ELEM;
typedef struct
{
UINT8 num_elem;
tBTM_BLE_PROP_ELEM *p_elem;
}tBTM_BLE_PROPRIETARY;
typedef struct
{
tBTM_BLE_MANU manu; /* manufactuer data */
tBTM_BLE_INT_RANGE int_range; /* slave prefered conn interval range */
tBTM_BLE_SERVICE services; /* services */
UINT8 flag;
UINT16 appearance;
tBTM_BLE_PROPRIETARY *p_proprietary;
}tBTM_BLE_ADV_DATA;
/* These are the fields returned in each device adv packet. It
** is returned in the results callback if registered.
*/
typedef struct
{
UINT8 conn_mode;
tBTM_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */
UINT8 flag;
UINT8 tx_power_level;
UINT8 remote_name_len;
UINT8 *p_remote_name;
tBTM_BLE_SERVICE service;
} tBTM_BLE_INQ_DATA;
enum
{
BTM_BLE_CONN_NONE,
BTM_BLE_CONN_AUTO,
BTM_BLE_CONN_SELECTIVE
};
typedef UINT8 tBTM_BLE_CONN_TYPE;
typedef BOOLEAN (tBTM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name);
/* callback function for SMP signing algorithm, signed data in little endian order with tlen bits long */
typedef void (tBTM_BLE_SIGN_CBACK)(void *p_ref_data, UINT8 *p_signing_data);
typedef void (tBTM_BLE_VERIFY_CBACK)(void *p_ref_data, BOOLEAN match);
/* random address set complete callback */
typedef void (tBTM_BLE_RANDOM_SET_CBACK) (BD_ADDR random_bda);
typedef void (tBTM_BLE_SCAN_REQ_CBACK)(BD_ADDR remote_bda, tBLE_ADDR_TYPE addr_type, UINT8 adv_evt);
/*****************************************************************************
** EXTERNAL FUNCTION DECLARATIONS
*****************************************************************************/
#ifdef __cplusplus
extern "C" {
#endif
/*******************************************************************************
**
** Function BTM_SecAddBleDevice
**
** Description Add/modify device. This function will be normally called
** during host startup to restore all required information
** for a LE device stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** bd_name - Name of the peer device. NULL if unknown.
** dev_type - Remote device's device type.
** addr_type - LE device address type.
**
** Returns TRUE if added OK, else FALSE
**
*******************************************************************************/
BTM_API extern BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name,
tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type);
/*******************************************************************************
**
** Function BTM_SecAddBleKey
**
** Description Add/modify LE device information. This function will be
** normally called during host startup to restore all required
** information stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** p_le_key - LE key values.
** key_type - LE SMP key type.
*
** Returns TRUE if added OK, else FALSE
**
*******************************************************************************/
BTM_API extern BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key,
tBTM_LE_KEY_TYPE key_type);
/*******************************************************************************
**
** Function BTM_BleSetAdvParams
**
** Description This function is called to set advertising parameters.
**
** Parameters: None.
**
** Returns void
**
*******************************************************************************/
BTM_API extern tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max,
tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP chnl_map);
/*******************************************************************************
**
** Function BTM_BleWriteAdvData
**
** Description This function is called to write advertising data.
**
** Parameters: None.
**
** Returns void
**
*******************************************************************************/
BTM_API extern tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK data_mask,
tBTM_BLE_ADV_DATA *p_data);
/*******************************************************************************
**
** Function BTM_BleSetAdvParams
**
** Description This function is called to set advertising parameters.
**
** Parameters adv_int_min: minimum advertising interval
** adv_int_max: maximum advertising interval
** p_dir_bda: connectable direct initiator's LE device address
** chnl_map: advertising channel map.
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max,
tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map);
/*******************************************************************************
**
** Function BTM_BleSetScanParams
**
** Description This function is called to set Scan parameters.
**
** Parameters adv_int_min: minimum advertising interval
** adv_int_max: maximum advertising interval
** scan_type: scan mode.
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_BleSetScanParams(UINT16 scan_interval, UINT16 scan_window,
tBTM_BLE_SCAN_MODE scan_type);
/*******************************************************************************
**
** Function BTM_BleWriteScanRsp
**
** Description This function is called to write LE scan response.
**
** Parameters: p_scan_rsp: scan response.
**
** Returns status
**
*******************************************************************************/
BTM_API extern tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask,
tBTM_BLE_ADV_DATA *p_data);
/*******************************************************************************
**
** Function BTM_BleReset
**
** Description This function is called to reset ULP controller.
**
** Parameters None.
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_BleReset(void);
/*******************************************************************************
**
** Function BTM_BleObserve
**
** Description This procedure keep the device listening for advertising
** events from a broadcast device.
**
** Parameters start: start or stop observe.
**
** Returns void
**
*******************************************************************************/
BTM_API extern tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT8 duration,
tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb);
/*******************************************************************************
**
** Function BTM_GetDeviceIDRoot
**
** Description This function is called to read the local device identity
** root.
**
** Returns void
** the local device ER is copied into er
**
*******************************************************************************/
BTM_API extern void BTM_GetDeviceIDRoot (BT_OCTET16 ir);
/*******************************************************************************
**
** Function BTM_GetDeviceEncRoot
**
** Description This function is called to read the local device encryption
** root.
**
** Returns void
** the local device ER is copied into er
**
*******************************************************************************/
BTM_API extern void BTM_GetDeviceEncRoot (BT_OCTET16 er);
/*******************************************************************************
**
** Function BTM_GetDeviceDHK
**
** Description This function is called to read the local device DHK.
**
** Returns void
** the local device DHK is copied into dhk
**
*******************************************************************************/
BTM_API extern void BTM_GetDeviceDHK (BT_OCTET16 dhk);
/*******************************************************************************
**
** Function BTM_SecurityGrant
**
** Description This function is called to grant security process.
**
** Parameters bd_addr - peer device bd address.
** res - result of the operation BTM_SUCCESS if success.
** Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts.
**
** Returns None
**
*******************************************************************************/
BTM_API extern void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res);
/*******************************************************************************
**
** Function BTM_BlePasskeyReply
**
** Description This function is called after Security Manager submitted
** passkey request to the application.
**
** Parameters: bd_addr - Address of the device for which passkey was requested
** res - result of the operation SMP_SUCCESS if success
** passkey - numeric value in the range of
** BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
**
*******************************************************************************/
BTM_API extern void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey);
/*******************************************************************************
**
** Function BTM_LeOobDataReply
**
** Description This function is called to provide the OOB data for
** SMP in response to BTM_LE_OOB_REQ_EVT
**
** Parameters: bd_addr - Address of the peer device
** res - result of the operation SMP_SUCCESS if success
** p_data - simple pairing Randomizer C.
**
*******************************************************************************/
BTM_API extern void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data);
/*******************************************************************************
**
** Function BTM_BleDataSignature
**
** Description This function is called to sign the data using AES128 CMAC
** algorith.
**
** Parameter bd_addr: target device the data to be signed for.
** p_text: singing data
** len: length of the signing data
** signature: output parameter where data signature is going to
** be stored.
**
** Returns TRUE if signing sucessul, otherwise FALSE.
**
*******************************************************************************/
BTM_API extern BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len,
BLE_SIGNATURE signature);
/*******************************************************************************
**
** Function BTM_BleVerifySignature
**
** Description This function is called to verify the data signature
**
** Parameter bd_addr: target device the data to be signed for.
** p_orig: original data before signature.
** len: length of the signing data
** counter: counter used when doing data signing
** p_comp: signature to be compared against.
** Returns TRUE if signature verified correctly; otherwise FALSE.
**
*******************************************************************************/
BTM_API extern BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig,
UINT16 len, UINT32 counter,
UINT8 *p_comp);
/*******************************************************************************
**
** Function BTM_ReadConnectionAddr
**
** Description This function is called to set the local device random address
** .
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_ReadConnectionAddr (BD_ADDR remote_bda, BD_ADDR local_conn_addr,
tBLE_ADDR_TYPE *p_addr_type);
/*******************************************************************************
**
** Function BTM_ReadRemoteConnectionAddr
**
** Description This function is read the remote device address currently used
** .
**
** Returns void
**
*******************************************************************************/
BTM_API extern BOOLEAN BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr,
BD_ADDR conn_addr,
tBLE_ADDR_TYPE *p_addr_type);
/*******************************************************************************
**
** Function BTM_BleLoadLocalKeys
**
** Description Local local identity key, encryption root or sign counter.
**
** Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER
** or BTM_BLE_KEY_TYPE_COUNTER.
** p_key: pointer to the key.
*
** Returns non2.
**
*******************************************************************************/
BTM_API extern void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key);
/*******************************************************************************
**
** Function BTM_BleSetBgConnType
**
** Description This function is called to set BLE background connection
** procedure type. It can be auto connection, or selective connection.
**
** Parameters conn_type: it can be auto connection, or selective connection.
** p_select_cback: callback function when selective connection procedure
** is being used.
**
** Returns void
**
*******************************************************************************/
BTM_API extern BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE conn_type,
tBTM_BLE_SEL_CBACK *p_select_cback);
/*******************************************************************************
**
** Function BTM_BleUpdateBgConnDev
**
** Description This function is called to add or remove a device into/from
** background connection procedure. The background connection
* procedure is decided by the background connection type, it can be
* auto connection, or selective connection.
**
** Parameters add_remove: TRUE to add; FALSE to remove.
** remote_bda: device address to add/remove.
**
** Returns void
**
*******************************************************************************/
BTM_API extern BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR remote_bda);
/********************************************************
**
** Function BTM_BleSetPrefConnParams
**
** Description Set a peripheral's preferred connection parameters. When
** any of the value does not want to be updated while others
** do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to
** leave untouched.
**
** Parameters: bd_addr - BD address of the peripheral
** min_conn_int - minimum preferred connection interval
** max_conn_int - maximum preferred connection interval
** slave_latency - preferred slave latency
** supervision_tout - preferred supervision timeout
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_BleSetPrefConnParams (BD_ADDR bd_addr,
UINT16 min_conn_int, UINT16 max_conn_int,
UINT16 slave_latency, UINT16 supervision_tout);
/******************************************************************************
**
** Function BTM_BleSetConnScanParams
**
** Description Set scan parameters used in BLE connection request
**
** Parameters: scan_interval - scan interval
** scan_window - scan window
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_BleSetConnScanParams (UINT16 scan_interval, UINT16 scan_window);
/*******************************************************************************
**
** Function BTM_CheckAdvData
**
** Description This function is called to get ADV data for a specific type.
**
** Parameters p_adv - pointer of ADV data
** type - finding ADV data type
** p_length - return the length of ADV data not including type
**
** Returns pointer of ADV data
**
*******************************************************************************/
BTM_API extern UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length);
/*******************************************************************************
**
** Function BTM_ReadDevInfo
**
** Description This function is called to read the device/address type
** of BD address.
**
** Parameter remote_bda: remote device address
** p_dev_type: output parameter to read the device type.
** p_addr_type: output parameter to read the address type.
**
*******************************************************************************/
BTM_API extern void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type,
tBLE_ADDR_TYPE *p_addr_type);
/*******************************************************************************
**
** Function BTM_BleBroadcast
**
** Description This function is to start or stop broadcasting.
**
** Parameters start: start or stop broadcasting.
**
** Returns status.
**
*******************************************************************************/
BTM_API extern tBTM_STATUS BTM_BleBroadcast(BOOLEAN start);
/*******************************************************************************
**
** Function BTM_RegisterScanReqEvt
**
** Description This function is called to register a scan request callback
** on the advertiser.
**
** Parameters p_scan_req_cback: scan request callback. If NULL, remove the
** registration.
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_RegisterScanReqEvt(tBTM_BLE_SCAN_REQ_CBACK *p_scan_req_cback);
/*******************************************************************************
**
** Function BTM_BleConfigPrivacy
**
** Description This function is called to enable or disable the privacy in
** the local device.
**
** Parameters enable: TRUE to enable it; FALSE to disable it.
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_BleConfigPrivacy(BOOLEAN enable);
/*******************************************************************************
**
** Function BTM_BleSetConnMode
**
** Description This function is called to set BLE connectable mode for a
** peripheral device.
**
** Parameters directed: is directed connectable mode, or non-directed.
** p_dir_bda: connectable direct initiator's LE device address
**
** Returns void
**
*******************************************************************************/
BTM_API extern tBTM_STATUS BTM_BleSetConnMode(BOOLEAN directed);
/*******************************************************************************
**
** Function BTM_BleTurnOnPrivacyOnRemote
**
** Description This function is called to enable or disable the privacy on the
** remote device.
**
** Parameters bd_addr: remote device address.
** privacy_on: TRUE to enable it; FALSE to disable it.
**
** Returns void
**
*******************************************************************************/
BTM_API extern void BTM_BleTurnOnPrivacyOnRemote(BD_ADDR bd_addr,
BOOLEAN privacy_on);
/*******************************************************************************
**
** Function BTM_BleUpdateAdvWhitelist
**
** Description Add or remove device from advertising white list
**
** Returns void
**
*******************************************************************************/
BTM_API extern BOOLEAN BTM_BleUpdateAdvWhitelist(BOOLEAN add_remove, BD_ADDR emote_bda);
/*******************************************************************************
**
** Function BTM_BleUpdateAdvFilterPolicy
**
** Description This function update the filter policy of advertiser.
**
** Parameter adv_policy: advertising filter policy
**
** Return void
*******************************************************************************/
BTM_API extern void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy);
/*******************************************************************************
**
** Function BTM_BleReceiverTest
**
** Description This function is called to start the LE Receiver test
**
** Parameter rx_freq - Frequency Range
** p_cmd_cmpl_cback - Command Complete callback
**
*******************************************************************************/
void BTM_BleReceiverTest(UINT8 rx_freq, tBTM_CMPL_CB *p_cmd_cmpl_cback);
/*******************************************************************************
**
** Function BTM_BleTransmitterTest
**
** Description This function is called to start the LE Transmitter test
**
** Parameter tx_freq - Frequency Range
** test_data_len - Length in bytes of payload data in each packet
** packet_payload - Pattern to use in the payload
** p_cmd_cmpl_cback - Command Complete callback
**
*******************************************************************************/
void BTM_BleTransmitterTest(UINT8 tx_freq, UINT8 test_data_len,
UINT8 packet_payload, tBTM_CMPL_CB *p_cmd_cmpl_cback);
/*******************************************************************************
**
** Function BTM_BleTestEnd
**
** Description This function is called to stop the in-progress TX or RX test
**
** Parameter p_cmd_cmpl_cback - Command complete callback
**
*******************************************************************************/
void BTM_BleTestEnd(tBTM_CMPL_CB *p_cmd_cmpl_cback);
#ifdef __cplusplus
}
#endif
#endif