| /* Loop Vectorization |
| Copyright (C) 2003-2014 Free Software Foundation, Inc. |
| Contributed by Dorit Naishlos <dorit@il.ibm.com> and |
| Ira Rosen <irar@il.ibm.com> |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 3, or (at your option) any later |
| version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #include "config.h" |
| #include "system.h" |
| #include "coretypes.h" |
| #include "dumpfile.h" |
| #include "tm.h" |
| #include "tree.h" |
| #include "stor-layout.h" |
| #include "basic-block.h" |
| #include "gimple-pretty-print.h" |
| #include "tree-ssa-alias.h" |
| #include "internal-fn.h" |
| #include "gimple-expr.h" |
| #include "is-a.h" |
| #include "gimple.h" |
| #include "gimplify.h" |
| #include "gimple-iterator.h" |
| #include "gimplify-me.h" |
| #include "gimple-ssa.h" |
| #include "tree-phinodes.h" |
| #include "ssa-iterators.h" |
| #include "stringpool.h" |
| #include "tree-ssanames.h" |
| #include "tree-ssa-loop-ivopts.h" |
| #include "tree-ssa-loop-manip.h" |
| #include "tree-ssa-loop-niter.h" |
| #include "tree-pass.h" |
| #include "cfgloop.h" |
| #include "expr.h" |
| #include "recog.h" |
| #include "optabs.h" |
| #include "params.h" |
| #include "diagnostic-core.h" |
| #include "tree-chrec.h" |
| #include "tree-scalar-evolution.h" |
| #include "tree-vectorizer.h" |
| #include "target.h" |
| |
| /* Loop Vectorization Pass. |
| |
| This pass tries to vectorize loops. |
| |
| For example, the vectorizer transforms the following simple loop: |
| |
| short a[N]; short b[N]; short c[N]; int i; |
| |
| for (i=0; i<N; i++){ |
| a[i] = b[i] + c[i]; |
| } |
| |
| as if it was manually vectorized by rewriting the source code into: |
| |
| typedef int __attribute__((mode(V8HI))) v8hi; |
| short a[N]; short b[N]; short c[N]; int i; |
| v8hi *pa = (v8hi*)a, *pb = (v8hi*)b, *pc = (v8hi*)c; |
| v8hi va, vb, vc; |
| |
| for (i=0; i<N/8; i++){ |
| vb = pb[i]; |
| vc = pc[i]; |
| va = vb + vc; |
| pa[i] = va; |
| } |
| |
| The main entry to this pass is vectorize_loops(), in which |
| the vectorizer applies a set of analyses on a given set of loops, |
| followed by the actual vectorization transformation for the loops that |
| had successfully passed the analysis phase. |
| Throughout this pass we make a distinction between two types of |
| data: scalars (which are represented by SSA_NAMES), and memory references |
| ("data-refs"). These two types of data require different handling both |
| during analysis and transformation. The types of data-refs that the |
| vectorizer currently supports are ARRAY_REFS which base is an array DECL |
| (not a pointer), and INDIRECT_REFS through pointers; both array and pointer |
| accesses are required to have a simple (consecutive) access pattern. |
| |
| Analysis phase: |
| =============== |
| The driver for the analysis phase is vect_analyze_loop(). |
| It applies a set of analyses, some of which rely on the scalar evolution |
| analyzer (scev) developed by Sebastian Pop. |
| |
| During the analysis phase the vectorizer records some information |
| per stmt in a "stmt_vec_info" struct which is attached to each stmt in the |
| loop, as well as general information about the loop as a whole, which is |
| recorded in a "loop_vec_info" struct attached to each loop. |
| |
| Transformation phase: |
| ===================== |
| The loop transformation phase scans all the stmts in the loop, and |
| creates a vector stmt (or a sequence of stmts) for each scalar stmt S in |
| the loop that needs to be vectorized. It inserts the vector code sequence |
| just before the scalar stmt S, and records a pointer to the vector code |
| in STMT_VINFO_VEC_STMT (stmt_info) (stmt_info is the stmt_vec_info struct |
| attached to S). This pointer will be used for the vectorization of following |
| stmts which use the def of stmt S. Stmt S is removed if it writes to memory; |
| otherwise, we rely on dead code elimination for removing it. |
| |
| For example, say stmt S1 was vectorized into stmt VS1: |
| |
| VS1: vb = px[i]; |
| S1: b = x[i]; STMT_VINFO_VEC_STMT (stmt_info (S1)) = VS1 |
| S2: a = b; |
| |
| To vectorize stmt S2, the vectorizer first finds the stmt that defines |
| the operand 'b' (S1), and gets the relevant vector def 'vb' from the |
| vector stmt VS1 pointed to by STMT_VINFO_VEC_STMT (stmt_info (S1)). The |
| resulting sequence would be: |
| |
| VS1: vb = px[i]; |
| S1: b = x[i]; STMT_VINFO_VEC_STMT (stmt_info (S1)) = VS1 |
| VS2: va = vb; |
| S2: a = b; STMT_VINFO_VEC_STMT (stmt_info (S2)) = VS2 |
| |
| Operands that are not SSA_NAMEs, are data-refs that appear in |
| load/store operations (like 'x[i]' in S1), and are handled differently. |
| |
| Target modeling: |
| ================= |
| Currently the only target specific information that is used is the |
| size of the vector (in bytes) - "TARGET_VECTORIZE_UNITS_PER_SIMD_WORD". |
| Targets that can support different sizes of vectors, for now will need |
| to specify one value for "TARGET_VECTORIZE_UNITS_PER_SIMD_WORD". More |
| flexibility will be added in the future. |
| |
| Since we only vectorize operations which vector form can be |
| expressed using existing tree codes, to verify that an operation is |
| supported, the vectorizer checks the relevant optab at the relevant |
| machine_mode (e.g, optab_handler (add_optab, V8HImode)). If |
| the value found is CODE_FOR_nothing, then there's no target support, and |
| we can't vectorize the stmt. |
| |
| For additional information on this project see: |
| http://gcc.gnu.org/projects/tree-ssa/vectorization.html |
| */ |
| |
| static void vect_estimate_min_profitable_iters (loop_vec_info, int *, int *); |
| |
| /* Function vect_determine_vectorization_factor |
| |
| Determine the vectorization factor (VF). VF is the number of data elements |
| that are operated upon in parallel in a single iteration of the vectorized |
| loop. For example, when vectorizing a loop that operates on 4byte elements, |
| on a target with vector size (VS) 16byte, the VF is set to 4, since 4 |
| elements can fit in a single vector register. |
| |
| We currently support vectorization of loops in which all types operated upon |
| are of the same size. Therefore this function currently sets VF according to |
| the size of the types operated upon, and fails if there are multiple sizes |
| in the loop. |
| |
| VF is also the factor by which the loop iterations are strip-mined, e.g.: |
| original loop: |
| for (i=0; i<N; i++){ |
| a[i] = b[i] + c[i]; |
| } |
| |
| vectorized loop: |
| for (i=0; i<N; i+=VF){ |
| a[i:VF] = b[i:VF] + c[i:VF]; |
| } |
| */ |
| |
| static bool |
| vect_determine_vectorization_factor (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| int nbbs = loop->num_nodes; |
| gimple_stmt_iterator si; |
| unsigned int vectorization_factor = 0; |
| tree scalar_type; |
| gimple phi; |
| tree vectype; |
| unsigned int nunits; |
| stmt_vec_info stmt_info; |
| int i; |
| HOST_WIDE_INT dummy; |
| gimple stmt, pattern_stmt = NULL; |
| gimple_seq pattern_def_seq = NULL; |
| gimple_stmt_iterator pattern_def_si = gsi_none (); |
| bool analyze_pattern_stmt = false; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "=== vect_determine_vectorization_factor ===\n"); |
| |
| for (i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| |
| for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| phi = gsi_stmt (si); |
| stmt_info = vinfo_for_stmt (phi); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "==> examining phi: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, phi, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| gcc_assert (stmt_info); |
| |
| if (STMT_VINFO_RELEVANT_P (stmt_info)) |
| { |
| gcc_assert (!STMT_VINFO_VECTYPE (stmt_info)); |
| scalar_type = TREE_TYPE (PHI_RESULT (phi)); |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "get vectype for scalar type: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, scalar_type); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| vectype = get_vectype_for_scalar_type (scalar_type); |
| if (!vectype) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: unsupported " |
| "data-type "); |
| dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, |
| scalar_type); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return false; |
| } |
| STMT_VINFO_VECTYPE (stmt_info) = vectype; |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "vectype: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, vectype); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| nunits = TYPE_VECTOR_SUBPARTS (vectype); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "nunits = %d\n", |
| nunits); |
| |
| if (!vectorization_factor |
| || (nunits > vectorization_factor)) |
| vectorization_factor = nunits; |
| } |
| } |
| |
| for (si = gsi_start_bb (bb); !gsi_end_p (si) || analyze_pattern_stmt;) |
| { |
| tree vf_vectype; |
| |
| if (analyze_pattern_stmt) |
| stmt = pattern_stmt; |
| else |
| stmt = gsi_stmt (si); |
| |
| stmt_info = vinfo_for_stmt (stmt); |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "==> examining statement: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| gcc_assert (stmt_info); |
| |
| /* Skip stmts which do not need to be vectorized. */ |
| if ((!STMT_VINFO_RELEVANT_P (stmt_info) |
| && !STMT_VINFO_LIVE_P (stmt_info)) |
| || gimple_clobber_p (stmt)) |
| { |
| if (STMT_VINFO_IN_PATTERN_P (stmt_info) |
| && (pattern_stmt = STMT_VINFO_RELATED_STMT (stmt_info)) |
| && (STMT_VINFO_RELEVANT_P (vinfo_for_stmt (pattern_stmt)) |
| || STMT_VINFO_LIVE_P (vinfo_for_stmt (pattern_stmt)))) |
| { |
| stmt = pattern_stmt; |
| stmt_info = vinfo_for_stmt (pattern_stmt); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "==> examining pattern statement: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "skip.\n"); |
| gsi_next (&si); |
| continue; |
| } |
| } |
| else if (STMT_VINFO_IN_PATTERN_P (stmt_info) |
| && (pattern_stmt = STMT_VINFO_RELATED_STMT (stmt_info)) |
| && (STMT_VINFO_RELEVANT_P (vinfo_for_stmt (pattern_stmt)) |
| || STMT_VINFO_LIVE_P (vinfo_for_stmt (pattern_stmt)))) |
| analyze_pattern_stmt = true; |
| |
| /* If a pattern statement has def stmts, analyze them too. */ |
| if (is_pattern_stmt_p (stmt_info)) |
| { |
| if (pattern_def_seq == NULL) |
| { |
| pattern_def_seq = STMT_VINFO_PATTERN_DEF_SEQ (stmt_info); |
| pattern_def_si = gsi_start (pattern_def_seq); |
| } |
| else if (!gsi_end_p (pattern_def_si)) |
| gsi_next (&pattern_def_si); |
| if (pattern_def_seq != NULL) |
| { |
| gimple pattern_def_stmt = NULL; |
| stmt_vec_info pattern_def_stmt_info = NULL; |
| |
| while (!gsi_end_p (pattern_def_si)) |
| { |
| pattern_def_stmt = gsi_stmt (pattern_def_si); |
| pattern_def_stmt_info |
| = vinfo_for_stmt (pattern_def_stmt); |
| if (STMT_VINFO_RELEVANT_P (pattern_def_stmt_info) |
| || STMT_VINFO_LIVE_P (pattern_def_stmt_info)) |
| break; |
| gsi_next (&pattern_def_si); |
| } |
| |
| if (!gsi_end_p (pattern_def_si)) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "==> examining pattern def stmt: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, |
| pattern_def_stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| stmt = pattern_def_stmt; |
| stmt_info = pattern_def_stmt_info; |
| } |
| else |
| { |
| pattern_def_si = gsi_none (); |
| analyze_pattern_stmt = false; |
| } |
| } |
| else |
| analyze_pattern_stmt = false; |
| } |
| |
| if (gimple_get_lhs (stmt) == NULL_TREE |
| /* MASK_STORE has no lhs, but is ok. */ |
| && (!is_gimple_call (stmt) |
| || !gimple_call_internal_p (stmt) |
| || gimple_call_internal_fn (stmt) != IFN_MASK_STORE)) |
| { |
| if (is_gimple_call (stmt)) |
| { |
| /* Ignore calls with no lhs. These must be calls to |
| #pragma omp simd functions, and what vectorization factor |
| it really needs can't be determined until |
| vectorizable_simd_clone_call. */ |
| if (!analyze_pattern_stmt && gsi_end_p (pattern_def_si)) |
| { |
| pattern_def_seq = NULL; |
| gsi_next (&si); |
| } |
| continue; |
| } |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: irregular stmt."); |
| dump_gimple_stmt (MSG_MISSED_OPTIMIZATION, TDF_SLIM, stmt, |
| 0); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return false; |
| } |
| |
| if (VECTOR_MODE_P (TYPE_MODE (gimple_expr_type (stmt)))) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: vector stmt in loop:"); |
| dump_gimple_stmt (MSG_MISSED_OPTIMIZATION, TDF_SLIM, stmt, 0); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return false; |
| } |
| |
| if (STMT_VINFO_VECTYPE (stmt_info)) |
| { |
| /* The only case when a vectype had been already set is for stmts |
| that contain a dataref, or for "pattern-stmts" (stmts |
| generated by the vectorizer to represent/replace a certain |
| idiom). */ |
| gcc_assert (STMT_VINFO_DATA_REF (stmt_info) |
| || is_pattern_stmt_p (stmt_info) |
| || !gsi_end_p (pattern_def_si)); |
| vectype = STMT_VINFO_VECTYPE (stmt_info); |
| } |
| else |
| { |
| gcc_assert (!STMT_VINFO_DATA_REF (stmt_info)); |
| if (is_gimple_call (stmt) |
| && gimple_call_internal_p (stmt) |
| && gimple_call_internal_fn (stmt) == IFN_MASK_STORE) |
| scalar_type = TREE_TYPE (gimple_call_arg (stmt, 3)); |
| else |
| scalar_type = TREE_TYPE (gimple_get_lhs (stmt)); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "get vectype for scalar type: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, scalar_type); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| vectype = get_vectype_for_scalar_type (scalar_type); |
| if (!vectype) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: unsupported " |
| "data-type "); |
| dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, |
| scalar_type); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return false; |
| } |
| |
| STMT_VINFO_VECTYPE (stmt_info) = vectype; |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "vectype: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, vectype); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| } |
| |
| /* The vectorization factor is according to the smallest |
| scalar type (or the largest vector size, but we only |
| support one vector size per loop). */ |
| scalar_type = vect_get_smallest_scalar_type (stmt, &dummy, |
| &dummy); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "get vectype for scalar type: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, scalar_type); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| vf_vectype = get_vectype_for_scalar_type (scalar_type); |
| if (!vf_vectype) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: unsupported data-type "); |
| dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, |
| scalar_type); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return false; |
| } |
| |
| if ((GET_MODE_SIZE (TYPE_MODE (vectype)) |
| != GET_MODE_SIZE (TYPE_MODE (vf_vectype)))) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: different sized vector " |
| "types in statement, "); |
| dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, |
| vectype); |
| dump_printf (MSG_MISSED_OPTIMIZATION, " and "); |
| dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, |
| vf_vectype); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return false; |
| } |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "vectype: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, vf_vectype); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| nunits = TYPE_VECTOR_SUBPARTS (vf_vectype); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "nunits = %d\n", nunits); |
| if (!vectorization_factor |
| || (nunits > vectorization_factor)) |
| vectorization_factor = nunits; |
| |
| if (!analyze_pattern_stmt && gsi_end_p (pattern_def_si)) |
| { |
| pattern_def_seq = NULL; |
| gsi_next (&si); |
| } |
| } |
| } |
| |
| /* TODO: Analyze cost. Decide if worth while to vectorize. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "vectorization factor = %d\n", |
| vectorization_factor); |
| if (vectorization_factor <= 1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: unsupported data-type\n"); |
| return false; |
| } |
| LOOP_VINFO_VECT_FACTOR (loop_vinfo) = vectorization_factor; |
| |
| return true; |
| } |
| |
| |
| /* Function vect_is_simple_iv_evolution. |
| |
| FORNOW: A simple evolution of an induction variables in the loop is |
| considered a polynomial evolution. */ |
| |
| static bool |
| vect_is_simple_iv_evolution (unsigned loop_nb, tree access_fn, tree * init, |
| tree * step) |
| { |
| tree init_expr; |
| tree step_expr; |
| tree evolution_part = evolution_part_in_loop_num (access_fn, loop_nb); |
| basic_block bb; |
| |
| /* When there is no evolution in this loop, the evolution function |
| is not "simple". */ |
| if (evolution_part == NULL_TREE) |
| return false; |
| |
| /* When the evolution is a polynomial of degree >= 2 |
| the evolution function is not "simple". */ |
| if (tree_is_chrec (evolution_part)) |
| return false; |
| |
| step_expr = evolution_part; |
| init_expr = unshare_expr (initial_condition_in_loop_num (access_fn, loop_nb)); |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "step: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, step_expr); |
| dump_printf (MSG_NOTE, ", init: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, init_expr); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| *init = init_expr; |
| *step = step_expr; |
| |
| if (TREE_CODE (step_expr) != INTEGER_CST |
| && (TREE_CODE (step_expr) != SSA_NAME |
| || ((bb = gimple_bb (SSA_NAME_DEF_STMT (step_expr))) |
| && flow_bb_inside_loop_p (get_loop (cfun, loop_nb), bb)) |
| || (!INTEGRAL_TYPE_P (TREE_TYPE (step_expr)) |
| && (!SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr)) |
| || !flag_associative_math))) |
| && (TREE_CODE (step_expr) != REAL_CST |
| || !flag_associative_math)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "step unknown.\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Function vect_analyze_scalar_cycles_1. |
| |
| Examine the cross iteration def-use cycles of scalar variables |
| in LOOP. LOOP_VINFO represents the loop that is now being |
| considered for vectorization (can be LOOP, or an outer-loop |
| enclosing LOOP). */ |
| |
| static void |
| vect_analyze_scalar_cycles_1 (loop_vec_info loop_vinfo, struct loop *loop) |
| { |
| basic_block bb = loop->header; |
| tree init, step; |
| auto_vec<gimple, 64> worklist; |
| gimple_stmt_iterator gsi; |
| bool double_reduc; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "=== vect_analyze_scalar_cycles ===\n"); |
| |
| /* First - identify all inductions. Reduction detection assumes that all the |
| inductions have been identified, therefore, this order must not be |
| changed. */ |
| for (gsi = gsi_start_phis (bb); !gsi_end_p (gsi); gsi_next (&gsi)) |
| { |
| gimple phi = gsi_stmt (gsi); |
| tree access_fn = NULL; |
| tree def = PHI_RESULT (phi); |
| stmt_vec_info stmt_vinfo = vinfo_for_stmt (phi); |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "Analyze phi: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, phi, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| /* Skip virtual phi's. The data dependences that are associated with |
| virtual defs/uses (i.e., memory accesses) are analyzed elsewhere. */ |
| if (virtual_operand_p (def)) |
| continue; |
| |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_unknown_def_type; |
| |
| /* Analyze the evolution function. */ |
| access_fn = analyze_scalar_evolution (loop, def); |
| if (access_fn) |
| { |
| STRIP_NOPS (access_fn); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Access function of PHI: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, access_fn); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| STMT_VINFO_LOOP_PHI_EVOLUTION_PART (stmt_vinfo) |
| = evolution_part_in_loop_num (access_fn, loop->num); |
| } |
| |
| if (!access_fn |
| || !vect_is_simple_iv_evolution (loop->num, access_fn, &init, &step) |
| || (LOOP_VINFO_LOOP (loop_vinfo) != loop |
| && TREE_CODE (step) != INTEGER_CST)) |
| { |
| worklist.safe_push (phi); |
| continue; |
| } |
| |
| gcc_assert (STMT_VINFO_LOOP_PHI_EVOLUTION_PART (stmt_vinfo) != NULL_TREE); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "Detected induction.\n"); |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_induction_def; |
| } |
| |
| |
| /* Second - identify all reductions and nested cycles. */ |
| while (worklist.length () > 0) |
| { |
| gimple phi = worklist.pop (); |
| tree def = PHI_RESULT (phi); |
| stmt_vec_info stmt_vinfo = vinfo_for_stmt (phi); |
| gimple reduc_stmt; |
| bool nested_cycle; |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "Analyze phi: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, phi, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| gcc_assert (!virtual_operand_p (def) |
| && STMT_VINFO_DEF_TYPE (stmt_vinfo) == vect_unknown_def_type); |
| |
| nested_cycle = (loop != LOOP_VINFO_LOOP (loop_vinfo)); |
| reduc_stmt = vect_force_simple_reduction (loop_vinfo, phi, !nested_cycle, |
| &double_reduc); |
| if (reduc_stmt) |
| { |
| if (double_reduc) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Detected double reduction.\n"); |
| |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_double_reduction_def; |
| STMT_VINFO_DEF_TYPE (vinfo_for_stmt (reduc_stmt)) = |
| vect_double_reduction_def; |
| } |
| else |
| { |
| if (nested_cycle) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Detected vectorizable nested cycle.\n"); |
| |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_nested_cycle; |
| STMT_VINFO_DEF_TYPE (vinfo_for_stmt (reduc_stmt)) = |
| vect_nested_cycle; |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Detected reduction.\n"); |
| |
| STMT_VINFO_DEF_TYPE (stmt_vinfo) = vect_reduction_def; |
| STMT_VINFO_DEF_TYPE (vinfo_for_stmt (reduc_stmt)) = |
| vect_reduction_def; |
| /* Store the reduction cycles for possible vectorization in |
| loop-aware SLP. */ |
| LOOP_VINFO_REDUCTIONS (loop_vinfo).safe_push (reduc_stmt); |
| } |
| } |
| } |
| else |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "Unknown def-use cycle pattern.\n"); |
| } |
| } |
| |
| |
| /* Function vect_analyze_scalar_cycles. |
| |
| Examine the cross iteration def-use cycles of scalar variables, by |
| analyzing the loop-header PHIs of scalar variables. Classify each |
| cycle as one of the following: invariant, induction, reduction, unknown. |
| We do that for the loop represented by LOOP_VINFO, and also to its |
| inner-loop, if exists. |
| Examples for scalar cycles: |
| |
| Example1: reduction: |
| |
| loop1: |
| for (i=0; i<N; i++) |
| sum += a[i]; |
| |
| Example2: induction: |
| |
| loop2: |
| for (i=0; i<N; i++) |
| a[i] = i; */ |
| |
| static void |
| vect_analyze_scalar_cycles (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| |
| vect_analyze_scalar_cycles_1 (loop_vinfo, loop); |
| |
| /* When vectorizing an outer-loop, the inner-loop is executed sequentially. |
| Reductions in such inner-loop therefore have different properties than |
| the reductions in the nest that gets vectorized: |
| 1. When vectorized, they are executed in the same order as in the original |
| scalar loop, so we can't change the order of computation when |
| vectorizing them. |
| 2. FIXME: Inner-loop reductions can be used in the inner-loop, so the |
| current checks are too strict. */ |
| |
| if (loop->inner) |
| vect_analyze_scalar_cycles_1 (loop_vinfo, loop->inner); |
| } |
| |
| |
| /* Function vect_get_loop_niters. |
| |
| Determine how many iterations the loop is executed and place it |
| in NUMBER_OF_ITERATIONS. Place the number of latch iterations |
| in NUMBER_OF_ITERATIONSM1. |
| |
| Return the loop exit condition. */ |
| |
| static gimple |
| vect_get_loop_niters (struct loop *loop, tree *number_of_iterations, |
| tree *number_of_iterationsm1) |
| { |
| tree niters; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "=== get_loop_niters ===\n"); |
| |
| niters = number_of_latch_executions (loop); |
| *number_of_iterationsm1 = niters; |
| |
| /* We want the number of loop header executions which is the number |
| of latch executions plus one. |
| ??? For UINT_MAX latch executions this number overflows to zero |
| for loops like do { n++; } while (n != 0); */ |
| if (niters && !chrec_contains_undetermined (niters)) |
| niters = fold_build2 (PLUS_EXPR, TREE_TYPE (niters), unshare_expr (niters), |
| build_int_cst (TREE_TYPE (niters), 1)); |
| *number_of_iterations = niters; |
| |
| return get_loop_exit_condition (loop); |
| } |
| |
| |
| /* Function bb_in_loop_p |
| |
| Used as predicate for dfs order traversal of the loop bbs. */ |
| |
| static bool |
| bb_in_loop_p (const_basic_block bb, const void *data) |
| { |
| const struct loop *const loop = (const struct loop *)data; |
| if (flow_bb_inside_loop_p (loop, bb)) |
| return true; |
| return false; |
| } |
| |
| |
| /* Function new_loop_vec_info. |
| |
| Create and initialize a new loop_vec_info struct for LOOP, as well as |
| stmt_vec_info structs for all the stmts in LOOP. */ |
| |
| static loop_vec_info |
| new_loop_vec_info (struct loop *loop) |
| { |
| loop_vec_info res; |
| basic_block *bbs; |
| gimple_stmt_iterator si; |
| unsigned int i, nbbs; |
| |
| res = (loop_vec_info) xcalloc (1, sizeof (struct _loop_vec_info)); |
| LOOP_VINFO_LOOP (res) = loop; |
| |
| bbs = get_loop_body (loop); |
| |
| /* Create/Update stmt_info for all stmts in the loop. */ |
| for (i = 0; i < loop->num_nodes; i++) |
| { |
| basic_block bb = bbs[i]; |
| |
| /* BBs in a nested inner-loop will have been already processed (because |
| we will have called vect_analyze_loop_form for any nested inner-loop). |
| Therefore, for stmts in an inner-loop we just want to update the |
| STMT_VINFO_LOOP_VINFO field of their stmt_info to point to the new |
| loop_info of the outer-loop we are currently considering to vectorize |
| (instead of the loop_info of the inner-loop). |
| For stmts in other BBs we need to create a stmt_info from scratch. */ |
| if (bb->loop_father != loop) |
| { |
| /* Inner-loop bb. */ |
| gcc_assert (loop->inner && bb->loop_father == loop->inner); |
| for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple phi = gsi_stmt (si); |
| stmt_vec_info stmt_info = vinfo_for_stmt (phi); |
| loop_vec_info inner_loop_vinfo = |
| STMT_VINFO_LOOP_VINFO (stmt_info); |
| gcc_assert (loop->inner == LOOP_VINFO_LOOP (inner_loop_vinfo)); |
| STMT_VINFO_LOOP_VINFO (stmt_info) = res; |
| } |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple stmt = gsi_stmt (si); |
| stmt_vec_info stmt_info = vinfo_for_stmt (stmt); |
| loop_vec_info inner_loop_vinfo = |
| STMT_VINFO_LOOP_VINFO (stmt_info); |
| gcc_assert (loop->inner == LOOP_VINFO_LOOP (inner_loop_vinfo)); |
| STMT_VINFO_LOOP_VINFO (stmt_info) = res; |
| } |
| } |
| else |
| { |
| /* bb in current nest. */ |
| for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple phi = gsi_stmt (si); |
| gimple_set_uid (phi, 0); |
| set_vinfo_for_stmt (phi, new_stmt_vec_info (phi, res, NULL)); |
| } |
| |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple stmt = gsi_stmt (si); |
| gimple_set_uid (stmt, 0); |
| set_vinfo_for_stmt (stmt, new_stmt_vec_info (stmt, res, NULL)); |
| } |
| } |
| } |
| |
| /* CHECKME: We want to visit all BBs before their successors (except for |
| latch blocks, for which this assertion wouldn't hold). In the simple |
| case of the loop forms we allow, a dfs order of the BBs would the same |
| as reversed postorder traversal, so we are safe. */ |
| |
| free (bbs); |
| bbs = XCNEWVEC (basic_block, loop->num_nodes); |
| nbbs = dfs_enumerate_from (loop->header, 0, bb_in_loop_p, |
| bbs, loop->num_nodes, loop); |
| gcc_assert (nbbs == loop->num_nodes); |
| |
| LOOP_VINFO_BBS (res) = bbs; |
| LOOP_VINFO_NITERSM1 (res) = NULL; |
| LOOP_VINFO_NITERS (res) = NULL; |
| LOOP_VINFO_NITERS_UNCHANGED (res) = NULL; |
| LOOP_VINFO_COST_MODEL_MIN_ITERS (res) = 0; |
| LOOP_VINFO_COST_MODEL_THRESHOLD (res) = 0; |
| LOOP_VINFO_VECTORIZABLE_P (res) = 0; |
| LOOP_VINFO_PEELING_FOR_ALIGNMENT (res) = 0; |
| LOOP_VINFO_VECT_FACTOR (res) = 0; |
| LOOP_VINFO_LOOP_NEST (res).create (3); |
| LOOP_VINFO_DATAREFS (res).create (10); |
| LOOP_VINFO_DDRS (res).create (10 * 10); |
| LOOP_VINFO_UNALIGNED_DR (res) = NULL; |
| LOOP_VINFO_MAY_MISALIGN_STMTS (res).create ( |
| PARAM_VALUE (PARAM_VECT_MAX_VERSION_FOR_ALIGNMENT_CHECKS)); |
| LOOP_VINFO_MAY_ALIAS_DDRS (res).create ( |
| PARAM_VALUE (PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS)); |
| LOOP_VINFO_GROUPED_STORES (res).create (10); |
| LOOP_VINFO_REDUCTIONS (res).create (10); |
| LOOP_VINFO_REDUCTION_CHAINS (res).create (10); |
| LOOP_VINFO_SLP_INSTANCES (res).create (10); |
| LOOP_VINFO_SLP_UNROLLING_FACTOR (res) = 1; |
| LOOP_VINFO_TARGET_COST_DATA (res) = init_cost (loop); |
| LOOP_VINFO_PEELING_FOR_GAPS (res) = false; |
| LOOP_VINFO_PEELING_FOR_NITER (res) = false; |
| LOOP_VINFO_OPERANDS_SWAPPED (res) = false; |
| |
| return res; |
| } |
| |
| |
| /* Function destroy_loop_vec_info. |
| |
| Free LOOP_VINFO struct, as well as all the stmt_vec_info structs of all the |
| stmts in the loop. */ |
| |
| void |
| destroy_loop_vec_info (loop_vec_info loop_vinfo, bool clean_stmts) |
| { |
| struct loop *loop; |
| basic_block *bbs; |
| int nbbs; |
| gimple_stmt_iterator si; |
| int j; |
| vec<slp_instance> slp_instances; |
| slp_instance instance; |
| bool swapped; |
| |
| if (!loop_vinfo) |
| return; |
| |
| loop = LOOP_VINFO_LOOP (loop_vinfo); |
| |
| bbs = LOOP_VINFO_BBS (loop_vinfo); |
| nbbs = clean_stmts ? loop->num_nodes : 0; |
| swapped = LOOP_VINFO_OPERANDS_SWAPPED (loop_vinfo); |
| |
| for (j = 0; j < nbbs; j++) |
| { |
| basic_block bb = bbs[j]; |
| for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si)) |
| free_stmt_vec_info (gsi_stmt (si)); |
| |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); ) |
| { |
| gimple stmt = gsi_stmt (si); |
| |
| /* We may have broken canonical form by moving a constant |
| into RHS1 of a commutative op. Fix such occurrences. */ |
| if (swapped && is_gimple_assign (stmt)) |
| { |
| enum tree_code code = gimple_assign_rhs_code (stmt); |
| |
| if ((code == PLUS_EXPR |
| || code == POINTER_PLUS_EXPR |
| || code == MULT_EXPR) |
| && CONSTANT_CLASS_P (gimple_assign_rhs1 (stmt))) |
| swap_ssa_operands (stmt, |
| gimple_assign_rhs1_ptr (stmt), |
| gimple_assign_rhs2_ptr (stmt)); |
| } |
| |
| /* Free stmt_vec_info. */ |
| free_stmt_vec_info (stmt); |
| gsi_next (&si); |
| } |
| } |
| |
| free (LOOP_VINFO_BBS (loop_vinfo)); |
| vect_destroy_datarefs (loop_vinfo, NULL); |
| free_dependence_relations (LOOP_VINFO_DDRS (loop_vinfo)); |
| LOOP_VINFO_LOOP_NEST (loop_vinfo).release (); |
| LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo).release (); |
| LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo).release (); |
| slp_instances = LOOP_VINFO_SLP_INSTANCES (loop_vinfo); |
| FOR_EACH_VEC_ELT (slp_instances, j, instance) |
| vect_free_slp_instance (instance); |
| |
| LOOP_VINFO_SLP_INSTANCES (loop_vinfo).release (); |
| LOOP_VINFO_GROUPED_STORES (loop_vinfo).release (); |
| LOOP_VINFO_REDUCTIONS (loop_vinfo).release (); |
| LOOP_VINFO_REDUCTION_CHAINS (loop_vinfo).release (); |
| |
| if (LOOP_VINFO_PEELING_HTAB (loop_vinfo).is_created ()) |
| LOOP_VINFO_PEELING_HTAB (loop_vinfo).dispose (); |
| |
| destroy_cost_data (LOOP_VINFO_TARGET_COST_DATA (loop_vinfo)); |
| |
| free (loop_vinfo); |
| loop->aux = NULL; |
| } |
| |
| |
| /* Function vect_analyze_loop_1. |
| |
| Apply a set of analyses on LOOP, and create a loop_vec_info struct |
| for it. The different analyses will record information in the |
| loop_vec_info struct. This is a subset of the analyses applied in |
| vect_analyze_loop, to be applied on an inner-loop nested in the loop |
| that is now considered for (outer-loop) vectorization. */ |
| |
| static loop_vec_info |
| vect_analyze_loop_1 (struct loop *loop) |
| { |
| loop_vec_info loop_vinfo; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "===== analyze_loop_nest_1 =====\n"); |
| |
| /* Check the CFG characteristics of the loop (nesting, entry/exit, etc. */ |
| |
| loop_vinfo = vect_analyze_loop_form (loop); |
| if (!loop_vinfo) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad inner-loop form.\n"); |
| return NULL; |
| } |
| |
| return loop_vinfo; |
| } |
| |
| |
| /* Function vect_analyze_loop_form. |
| |
| Verify that certain CFG restrictions hold, including: |
| - the loop has a pre-header |
| - the loop has a single entry and exit |
| - the loop exit condition is simple enough, and the number of iterations |
| can be analyzed (a countable loop). */ |
| |
| loop_vec_info |
| vect_analyze_loop_form (struct loop *loop) |
| { |
| loop_vec_info loop_vinfo; |
| gimple loop_cond; |
| tree number_of_iterations = NULL, number_of_iterationsm1 = NULL; |
| loop_vec_info inner_loop_vinfo = NULL; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "=== vect_analyze_loop_form ===\n"); |
| |
| /* Different restrictions apply when we are considering an inner-most loop, |
| vs. an outer (nested) loop. |
| (FORNOW. May want to relax some of these restrictions in the future). */ |
| |
| if (!loop->inner) |
| { |
| /* Inner-most loop. We currently require that the number of BBs is |
| exactly 2 (the header and latch). Vectorizable inner-most loops |
| look like this: |
| |
| (pre-header) |
| | |
| header <--------+ |
| | | | |
| | +--> latch --+ |
| | |
| (exit-bb) */ |
| |
| if (loop->num_nodes != 2) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: control flow in loop.\n"); |
| return NULL; |
| } |
| |
| if (empty_block_p (loop->header)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: empty loop.\n"); |
| return NULL; |
| } |
| } |
| else |
| { |
| struct loop *innerloop = loop->inner; |
| edge entryedge; |
| |
| /* Nested loop. We currently require that the loop is doubly-nested, |
| contains a single inner loop, and the number of BBs is exactly 5. |
| Vectorizable outer-loops look like this: |
| |
| (pre-header) |
| | |
| header <---+ |
| | | |
| inner-loop | |
| | | |
| tail ------+ |
| | |
| (exit-bb) |
| |
| The inner-loop has the properties expected of inner-most loops |
| as described above. */ |
| |
| if ((loop->inner)->inner || (loop->inner)->next) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: multiple nested loops.\n"); |
| return NULL; |
| } |
| |
| /* Analyze the inner-loop. */ |
| inner_loop_vinfo = vect_analyze_loop_1 (loop->inner); |
| if (!inner_loop_vinfo) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: Bad inner loop.\n"); |
| return NULL; |
| } |
| |
| if (!expr_invariant_in_loop_p (loop, |
| LOOP_VINFO_NITERS (inner_loop_vinfo))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: inner-loop count not" |
| " invariant.\n"); |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| |
| if (loop->num_nodes != 5) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: control flow in loop.\n"); |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| |
| gcc_assert (EDGE_COUNT (innerloop->header->preds) == 2); |
| entryedge = EDGE_PRED (innerloop->header, 0); |
| if (EDGE_PRED (innerloop->header, 0)->src == innerloop->latch) |
| entryedge = EDGE_PRED (innerloop->header, 1); |
| |
| if (entryedge->src != loop->header |
| || !single_exit (innerloop) |
| || single_exit (innerloop)->dest != EDGE_PRED (loop->latch, 0)->src) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: unsupported outerloop form.\n"); |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Considering outer-loop vectorization.\n"); |
| } |
| |
| if (!single_exit (loop) |
| || EDGE_COUNT (loop->header->preds) != 2) |
| { |
| if (dump_enabled_p ()) |
| { |
| if (!single_exit (loop)) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: multiple exits.\n"); |
| else if (EDGE_COUNT (loop->header->preds) != 2) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: too many incoming edges.\n"); |
| } |
| if (inner_loop_vinfo) |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| |
| /* We assume that the loop exit condition is at the end of the loop. i.e, |
| that the loop is represented as a do-while (with a proper if-guard |
| before the loop if needed), where the loop header contains all the |
| executable statements, and the latch is empty. */ |
| if (!empty_block_p (loop->latch) |
| || !gimple_seq_empty_p (phi_nodes (loop->latch))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: latch block not empty.\n"); |
| if (inner_loop_vinfo) |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| |
| /* Make sure there exists a single-predecessor exit bb: */ |
| if (!single_pred_p (single_exit (loop)->dest)) |
| { |
| edge e = single_exit (loop); |
| if (!(e->flags & EDGE_ABNORMAL)) |
| { |
| split_loop_exit_edge (e); |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "split exit edge.\n"); |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: abnormal loop exit edge.\n"); |
| if (inner_loop_vinfo) |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| } |
| |
| loop_cond = vect_get_loop_niters (loop, &number_of_iterations, |
| &number_of_iterationsm1); |
| if (!loop_cond) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: complicated exit condition.\n"); |
| if (inner_loop_vinfo) |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| |
| if (!number_of_iterations |
| || chrec_contains_undetermined (number_of_iterations)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: number of iterations cannot be " |
| "computed.\n"); |
| if (inner_loop_vinfo) |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| |
| if (integer_zerop (number_of_iterations)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: number of iterations = 0.\n"); |
| if (inner_loop_vinfo) |
| destroy_loop_vec_info (inner_loop_vinfo, true); |
| return NULL; |
| } |
| |
| loop_vinfo = new_loop_vec_info (loop); |
| LOOP_VINFO_NITERSM1 (loop_vinfo) = number_of_iterationsm1; |
| LOOP_VINFO_NITERS (loop_vinfo) = number_of_iterations; |
| LOOP_VINFO_NITERS_UNCHANGED (loop_vinfo) = number_of_iterations; |
| |
| if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Symbolic number of iterations is "); |
| dump_generic_expr (MSG_NOTE, TDF_DETAILS, number_of_iterations); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| } |
| |
| STMT_VINFO_TYPE (vinfo_for_stmt (loop_cond)) = loop_exit_ctrl_vec_info_type; |
| |
| /* CHECKME: May want to keep it around it in the future. */ |
| if (inner_loop_vinfo) |
| destroy_loop_vec_info (inner_loop_vinfo, false); |
| |
| gcc_assert (!loop->aux); |
| loop->aux = loop_vinfo; |
| return loop_vinfo; |
| } |
| |
| |
| /* Function vect_analyze_loop_operations. |
| |
| Scan the loop stmts and make sure they are all vectorizable. */ |
| |
| static bool |
| vect_analyze_loop_operations (loop_vec_info loop_vinfo, bool slp) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| int nbbs = loop->num_nodes; |
| gimple_stmt_iterator si; |
| unsigned int vectorization_factor = 0; |
| int i; |
| gimple phi; |
| stmt_vec_info stmt_info; |
| bool need_to_vectorize = false; |
| int min_profitable_iters; |
| int min_scalar_loop_bound; |
| unsigned int th; |
| bool only_slp_in_loop = true, ok; |
| HOST_WIDE_INT max_niter; |
| HOST_WIDE_INT estimated_niter; |
| int min_profitable_estimate; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "=== vect_analyze_loop_operations ===\n"); |
| |
| gcc_assert (LOOP_VINFO_VECT_FACTOR (loop_vinfo)); |
| vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| if (slp) |
| { |
| /* If all the stmts in the loop can be SLPed, we perform only SLP, and |
| vectorization factor of the loop is the unrolling factor required by |
| the SLP instances. If that unrolling factor is 1, we say, that we |
| perform pure SLP on loop - cross iteration parallelism is not |
| exploited. */ |
| for (i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple stmt = gsi_stmt (si); |
| stmt_vec_info stmt_info = vinfo_for_stmt (stmt); |
| gcc_assert (stmt_info); |
| if ((STMT_VINFO_RELEVANT_P (stmt_info) |
| || VECTORIZABLE_CYCLE_DEF (STMT_VINFO_DEF_TYPE (stmt_info))) |
| && !PURE_SLP_STMT (stmt_info)) |
| /* STMT needs both SLP and loop-based vectorization. */ |
| only_slp_in_loop = false; |
| } |
| } |
| |
| if (only_slp_in_loop) |
| vectorization_factor = LOOP_VINFO_SLP_UNROLLING_FACTOR (loop_vinfo); |
| else |
| vectorization_factor = least_common_multiple (vectorization_factor, |
| LOOP_VINFO_SLP_UNROLLING_FACTOR (loop_vinfo)); |
| |
| LOOP_VINFO_VECT_FACTOR (loop_vinfo) = vectorization_factor; |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Updating vectorization factor to %d\n", |
| vectorization_factor); |
| } |
| |
| for (i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| |
| for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| phi = gsi_stmt (si); |
| ok = true; |
| |
| stmt_info = vinfo_for_stmt (phi); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "examining phi: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, phi, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| /* Inner-loop loop-closed exit phi in outer-loop vectorization |
| (i.e., a phi in the tail of the outer-loop). */ |
| if (! is_loop_header_bb_p (bb)) |
| { |
| /* FORNOW: we currently don't support the case that these phis |
| are not used in the outerloop (unless it is double reduction, |
| i.e., this phi is vect_reduction_def), cause this case |
| requires to actually do something here. */ |
| if ((!STMT_VINFO_RELEVANT_P (stmt_info) |
| || STMT_VINFO_LIVE_P (stmt_info)) |
| && STMT_VINFO_DEF_TYPE (stmt_info) |
| != vect_double_reduction_def) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "Unsupported loop-closed phi in " |
| "outer-loop.\n"); |
| return false; |
| } |
| |
| /* If PHI is used in the outer loop, we check that its operand |
| is defined in the inner loop. */ |
| if (STMT_VINFO_RELEVANT_P (stmt_info)) |
| { |
| tree phi_op; |
| gimple op_def_stmt; |
| |
| if (gimple_phi_num_args (phi) != 1) |
| return false; |
| |
| phi_op = PHI_ARG_DEF (phi, 0); |
| if (TREE_CODE (phi_op) != SSA_NAME) |
| return false; |
| |
| op_def_stmt = SSA_NAME_DEF_STMT (phi_op); |
| if (gimple_nop_p (op_def_stmt) |
| || !flow_bb_inside_loop_p (loop, gimple_bb (op_def_stmt)) |
| || !vinfo_for_stmt (op_def_stmt)) |
| return false; |
| |
| if (STMT_VINFO_RELEVANT (vinfo_for_stmt (op_def_stmt)) |
| != vect_used_in_outer |
| && STMT_VINFO_RELEVANT (vinfo_for_stmt (op_def_stmt)) |
| != vect_used_in_outer_by_reduction) |
| return false; |
| } |
| |
| continue; |
| } |
| |
| gcc_assert (stmt_info); |
| |
| if (STMT_VINFO_LIVE_P (stmt_info)) |
| { |
| /* FORNOW: not yet supported. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: value used after loop.\n"); |
| return false; |
| } |
| |
| if (STMT_VINFO_RELEVANT (stmt_info) == vect_used_in_scope |
| && STMT_VINFO_DEF_TYPE (stmt_info) != vect_induction_def) |
| { |
| /* A scalar-dependence cycle that we don't support. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: scalar dependence cycle.\n"); |
| return false; |
| } |
| |
| if (STMT_VINFO_RELEVANT_P (stmt_info)) |
| { |
| need_to_vectorize = true; |
| if (STMT_VINFO_DEF_TYPE (stmt_info) == vect_induction_def) |
| ok = vectorizable_induction (phi, NULL, NULL); |
| } |
| |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: relevant phi not " |
| "supported: "); |
| dump_gimple_stmt (MSG_MISSED_OPTIMIZATION, TDF_SLIM, phi, 0); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return false; |
| } |
| } |
| |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple stmt = gsi_stmt (si); |
| if (!gimple_clobber_p (stmt) |
| && !vect_analyze_stmt (stmt, &need_to_vectorize, NULL)) |
| return false; |
| } |
| } /* bbs */ |
| |
| /* All operations in the loop are either irrelevant (deal with loop |
| control, or dead), or only used outside the loop and can be moved |
| out of the loop (e.g. invariants, inductions). The loop can be |
| optimized away by scalar optimizations. We're better off not |
| touching this loop. */ |
| if (!need_to_vectorize) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "All the computation can be taken out of the loop.\n"); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: redundant loop. no profit to " |
| "vectorize.\n"); |
| return false; |
| } |
| |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) && dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "vectorization_factor = %d, niters = " |
| HOST_WIDE_INT_PRINT_DEC "\n", vectorization_factor, |
| LOOP_VINFO_INT_NITERS (loop_vinfo)); |
| |
| if ((LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| && (LOOP_VINFO_INT_NITERS (loop_vinfo) < vectorization_factor)) |
| || ((max_niter = max_stmt_executions_int (loop)) != -1 |
| && (unsigned HOST_WIDE_INT) max_niter < vectorization_factor)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: iteration count too small.\n"); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: iteration count smaller than " |
| "vectorization factor.\n"); |
| return false; |
| } |
| |
| /* Analyze cost. Decide if worth while to vectorize. */ |
| |
| /* Once VF is set, SLP costs should be updated since the number of created |
| vector stmts depends on VF. */ |
| vect_update_slp_costs_according_to_vf (loop_vinfo); |
| |
| vect_estimate_min_profitable_iters (loop_vinfo, &min_profitable_iters, |
| &min_profitable_estimate); |
| LOOP_VINFO_COST_MODEL_MIN_ITERS (loop_vinfo) = min_profitable_iters; |
| |
| if (min_profitable_iters < 0) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: vectorization not profitable.\n"); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: vector version will never be " |
| "profitable.\n"); |
| return false; |
| } |
| |
| min_scalar_loop_bound = ((PARAM_VALUE (PARAM_MIN_VECT_LOOP_BOUND) |
| * vectorization_factor) - 1); |
| |
| |
| /* Use the cost model only if it is more conservative than user specified |
| threshold. */ |
| |
| th = (unsigned) min_scalar_loop_bound; |
| if (min_profitable_iters |
| && (!min_scalar_loop_bound |
| || min_profitable_iters > min_scalar_loop_bound)) |
| th = (unsigned) min_profitable_iters; |
| |
| LOOP_VINFO_COST_MODEL_THRESHOLD (loop_vinfo) = th; |
| |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| && LOOP_VINFO_INT_NITERS (loop_vinfo) <= th) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: vectorization not profitable.\n"); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "not vectorized: iteration count smaller than user " |
| "specified loop bound parameter or minimum profitable " |
| "iterations (whichever is more conservative).\n"); |
| return false; |
| } |
| |
| if ((estimated_niter = estimated_stmt_executions_int (loop)) != -1 |
| && ((unsigned HOST_WIDE_INT) estimated_niter |
| <= MAX (th, (unsigned)min_profitable_estimate))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: estimated iteration count too " |
| "small.\n"); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "not vectorized: estimated iteration count smaller " |
| "than specified loop bound parameter or minimum " |
| "profitable iterations (whichever is more " |
| "conservative).\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| |
| /* Function vect_analyze_loop_2. |
| |
| Apply a set of analyses on LOOP, and create a loop_vec_info struct |
| for it. The different analyses will record information in the |
| loop_vec_info struct. */ |
| static bool |
| vect_analyze_loop_2 (loop_vec_info loop_vinfo) |
| { |
| bool ok, slp = false; |
| int max_vf = MAX_VECTORIZATION_FACTOR; |
| int min_vf = 2; |
| unsigned int th; |
| unsigned int n_stmts = 0; |
| |
| /* Find all data references in the loop (which correspond to vdefs/vuses) |
| and analyze their evolution in the loop. Also adjust the minimal |
| vectorization factor according to the loads and stores. |
| |
| FORNOW: Handle only simple, array references, which |
| alignment can be forced, and aligned pointer-references. */ |
| |
| ok = vect_analyze_data_refs (loop_vinfo, NULL, &min_vf, &n_stmts); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data references.\n"); |
| return false; |
| } |
| |
| /* Classify all cross-iteration scalar data-flow cycles. |
| Cross-iteration cycles caused by virtual phis are analyzed separately. */ |
| |
| vect_analyze_scalar_cycles (loop_vinfo); |
| |
| vect_pattern_recog (loop_vinfo, NULL); |
| |
| /* Analyze the access patterns of the data-refs in the loop (consecutive, |
| complex, etc.). FORNOW: Only handle consecutive access pattern. */ |
| |
| ok = vect_analyze_data_ref_accesses (loop_vinfo, NULL); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data access.\n"); |
| return false; |
| } |
| |
| /* Data-flow analysis to detect stmts that do not need to be vectorized. */ |
| |
| ok = vect_mark_stmts_to_be_vectorized (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unexpected pattern.\n"); |
| return false; |
| } |
| |
| /* Analyze data dependences between the data-refs in the loop |
| and adjust the maximum vectorization factor according to |
| the dependences. |
| FORNOW: fail at the first data dependence that we encounter. */ |
| |
| ok = vect_analyze_data_ref_dependences (loop_vinfo, &max_vf); |
| if (!ok |
| || max_vf < min_vf) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data dependence.\n"); |
| return false; |
| } |
| |
| ok = vect_determine_vectorization_factor (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "can't determine vectorization factor.\n"); |
| return false; |
| } |
| if (max_vf < LOOP_VINFO_VECT_FACTOR (loop_vinfo)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data dependence.\n"); |
| return false; |
| } |
| |
| /* Analyze the alignment of the data-refs in the loop. |
| Fail if a data reference is found that cannot be vectorized. */ |
| |
| ok = vect_analyze_data_refs_alignment (loop_vinfo, NULL); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data alignment.\n"); |
| return false; |
| } |
| |
| /* Prune the list of ddrs to be tested at run-time by versioning for alias. |
| It is important to call pruning after vect_analyze_data_ref_accesses, |
| since we use grouping information gathered by interleaving analysis. */ |
| ok = vect_prune_runtime_alias_test_list (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "number of versioning for alias " |
| "run-time tests exceeds %d " |
| "(--param vect-max-version-for-alias-checks)\n", |
| PARAM_VALUE (PARAM_VECT_MAX_VERSION_FOR_ALIAS_CHECKS)); |
| return false; |
| } |
| |
| /* This pass will decide on using loop versioning and/or loop peeling in |
| order to enhance the alignment of data references in the loop. */ |
| |
| ok = vect_enhance_data_refs_alignment (loop_vinfo); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad data alignment.\n"); |
| return false; |
| } |
| |
| /* Check the SLP opportunities in the loop, analyze and build SLP trees. */ |
| ok = vect_analyze_slp (loop_vinfo, NULL, n_stmts); |
| if (ok) |
| { |
| /* Decide which possible SLP instances to SLP. */ |
| slp = vect_make_slp_decision (loop_vinfo); |
| |
| /* Find stmts that need to be both vectorized and SLPed. */ |
| vect_detect_hybrid_slp (loop_vinfo); |
| } |
| else |
| return false; |
| |
| /* Scan all the operations in the loop and make sure they are |
| vectorizable. */ |
| |
| ok = vect_analyze_loop_operations (loop_vinfo, slp); |
| if (!ok) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad operation or unsupported loop bound.\n"); |
| return false; |
| } |
| |
| /* Decide whether we need to create an epilogue loop to handle |
| remaining scalar iterations. */ |
| th = ((LOOP_VINFO_COST_MODEL_THRESHOLD (loop_vinfo) + 1) |
| / LOOP_VINFO_VECT_FACTOR (loop_vinfo)) |
| * LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| && LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo) > 0) |
| { |
| if (ctz_hwi (LOOP_VINFO_INT_NITERS (loop_vinfo) |
| - LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo)) |
| < exact_log2 (LOOP_VINFO_VECT_FACTOR (loop_vinfo))) |
| LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo) = true; |
| } |
| else if (LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo) |
| || (tree_ctz (LOOP_VINFO_NITERS (loop_vinfo)) |
| < (unsigned)exact_log2 (LOOP_VINFO_VECT_FACTOR (loop_vinfo)) |
| /* In case of versioning, check if the maximum number of |
| iterations is greater than th. If they are identical, |
| the epilogue is unnecessary. */ |
| && ((!LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo) |
| && !LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo)) |
| || (unsigned HOST_WIDE_INT)max_stmt_executions_int |
| (LOOP_VINFO_LOOP (loop_vinfo)) > th))) |
| LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo) = true; |
| |
| /* If an epilogue loop is required make sure we can create one. */ |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) |
| || LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "epilog loop required\n"); |
| if (!vect_can_advance_ivs_p (loop_vinfo) |
| || !slpeel_can_duplicate_loop_p (LOOP_VINFO_LOOP (loop_vinfo), |
| single_exit (LOOP_VINFO_LOOP |
| (loop_vinfo)))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not vectorized: can't create required " |
| "epilog loop\n"); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| /* Function vect_analyze_loop. |
| |
| Apply a set of analyses on LOOP, and create a loop_vec_info struct |
| for it. The different analyses will record information in the |
| loop_vec_info struct. */ |
| loop_vec_info |
| vect_analyze_loop (struct loop *loop) |
| { |
| loop_vec_info loop_vinfo; |
| unsigned int vector_sizes; |
| |
| /* Autodetect first vector size we try. */ |
| current_vector_size = 0; |
| vector_sizes = targetm.vectorize.autovectorize_vector_sizes (); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "===== analyze_loop_nest =====\n"); |
| |
| if (loop_outer (loop) |
| && loop_vec_info_for_loop (loop_outer (loop)) |
| && LOOP_VINFO_VECTORIZABLE_P (loop_vec_info_for_loop (loop_outer (loop)))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "outer-loop already vectorized.\n"); |
| return NULL; |
| } |
| |
| while (1) |
| { |
| /* Check the CFG characteristics of the loop (nesting, entry/exit). */ |
| loop_vinfo = vect_analyze_loop_form (loop); |
| if (!loop_vinfo) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "bad loop form.\n"); |
| return NULL; |
| } |
| |
| if (vect_analyze_loop_2 (loop_vinfo)) |
| { |
| LOOP_VINFO_VECTORIZABLE_P (loop_vinfo) = 1; |
| |
| return loop_vinfo; |
| } |
| |
| destroy_loop_vec_info (loop_vinfo, true); |
| |
| vector_sizes &= ~current_vector_size; |
| if (vector_sizes == 0 |
| || current_vector_size == 0) |
| return NULL; |
| |
| /* Try the next biggest vector size. */ |
| current_vector_size = 1 << floor_log2 (vector_sizes); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "***** Re-trying analysis with " |
| "vector size %d\n", current_vector_size); |
| } |
| } |
| |
| |
| /* Function reduction_code_for_scalar_code |
| |
| Input: |
| CODE - tree_code of a reduction operations. |
| |
| Output: |
| REDUC_CODE - the corresponding tree-code to be used to reduce the |
| vector of partial results into a single scalar result (which |
| will also reside in a vector) or ERROR_MARK if the operation is |
| a supported reduction operation, but does not have such tree-code. |
| |
| Return FALSE if CODE currently cannot be vectorized as reduction. */ |
| |
| static bool |
| reduction_code_for_scalar_code (enum tree_code code, |
| enum tree_code *reduc_code) |
| { |
| switch (code) |
| { |
| case MAX_EXPR: |
| *reduc_code = REDUC_MAX_EXPR; |
| return true; |
| |
| case MIN_EXPR: |
| *reduc_code = REDUC_MIN_EXPR; |
| return true; |
| |
| case PLUS_EXPR: |
| *reduc_code = REDUC_PLUS_EXPR; |
| return true; |
| |
| case MULT_EXPR: |
| case MINUS_EXPR: |
| case BIT_IOR_EXPR: |
| case BIT_XOR_EXPR: |
| case BIT_AND_EXPR: |
| *reduc_code = ERROR_MARK; |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| |
| /* Error reporting helper for vect_is_simple_reduction below. GIMPLE statement |
| STMT is printed with a message MSG. */ |
| |
| static void |
| report_vect_op (int msg_type, gimple stmt, const char *msg) |
| { |
| dump_printf_loc (msg_type, vect_location, "%s", msg); |
| dump_gimple_stmt (msg_type, TDF_SLIM, stmt, 0); |
| dump_printf (msg_type, "\n"); |
| } |
| |
| |
| /* Detect SLP reduction of the form: |
| |
| #a1 = phi <a5, a0> |
| a2 = operation (a1) |
| a3 = operation (a2) |
| a4 = operation (a3) |
| a5 = operation (a4) |
| |
| #a = phi <a5> |
| |
| PHI is the reduction phi node (#a1 = phi <a5, a0> above) |
| FIRST_STMT is the first reduction stmt in the chain |
| (a2 = operation (a1)). |
| |
| Return TRUE if a reduction chain was detected. */ |
| |
| static bool |
| vect_is_slp_reduction (loop_vec_info loop_info, gimple phi, gimple first_stmt) |
| { |
| struct loop *loop = (gimple_bb (phi))->loop_father; |
| struct loop *vect_loop = LOOP_VINFO_LOOP (loop_info); |
| enum tree_code code; |
| gimple current_stmt = NULL, loop_use_stmt = NULL, first, next_stmt; |
| stmt_vec_info use_stmt_info, current_stmt_info; |
| tree lhs; |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| int nloop_uses, size = 0, n_out_of_loop_uses; |
| bool found = false; |
| |
| if (loop != vect_loop) |
| return false; |
| |
| lhs = PHI_RESULT (phi); |
| code = gimple_assign_rhs_code (first_stmt); |
| while (1) |
| { |
| nloop_uses = 0; |
| n_out_of_loop_uses = 0; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, lhs) |
| { |
| gimple use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| |
| /* Check if we got back to the reduction phi. */ |
| if (use_stmt == phi) |
| { |
| loop_use_stmt = use_stmt; |
| found = true; |
| break; |
| } |
| |
| if (flow_bb_inside_loop_p (loop, gimple_bb (use_stmt))) |
| { |
| if (vinfo_for_stmt (use_stmt) |
| && !STMT_VINFO_IN_PATTERN_P (vinfo_for_stmt (use_stmt))) |
| { |
| loop_use_stmt = use_stmt; |
| nloop_uses++; |
| } |
| } |
| else |
| n_out_of_loop_uses++; |
| |
| /* There are can be either a single use in the loop or two uses in |
| phi nodes. */ |
| if (nloop_uses > 1 || (n_out_of_loop_uses && nloop_uses)) |
| return false; |
| } |
| |
| if (found) |
| break; |
| |
| /* We reached a statement with no loop uses. */ |
| if (nloop_uses == 0) |
| return false; |
| |
| /* This is a loop exit phi, and we haven't reached the reduction phi. */ |
| if (gimple_code (loop_use_stmt) == GIMPLE_PHI) |
| return false; |
| |
| if (!is_gimple_assign (loop_use_stmt) |
| || code != gimple_assign_rhs_code (loop_use_stmt) |
| || !flow_bb_inside_loop_p (loop, gimple_bb (loop_use_stmt))) |
| return false; |
| |
| /* Insert USE_STMT into reduction chain. */ |
| use_stmt_info = vinfo_for_stmt (loop_use_stmt); |
| if (current_stmt) |
| { |
| current_stmt_info = vinfo_for_stmt (current_stmt); |
| GROUP_NEXT_ELEMENT (current_stmt_info) = loop_use_stmt; |
| GROUP_FIRST_ELEMENT (use_stmt_info) |
| = GROUP_FIRST_ELEMENT (current_stmt_info); |
| } |
| else |
| GROUP_FIRST_ELEMENT (use_stmt_info) = loop_use_stmt; |
| |
| lhs = gimple_assign_lhs (loop_use_stmt); |
| current_stmt = loop_use_stmt; |
| size++; |
| } |
| |
| if (!found || loop_use_stmt != phi || size < 2) |
| return false; |
| |
| /* Swap the operands, if needed, to make the reduction operand be the second |
| operand. */ |
| lhs = PHI_RESULT (phi); |
| next_stmt = GROUP_FIRST_ELEMENT (vinfo_for_stmt (current_stmt)); |
| while (next_stmt) |
| { |
| if (gimple_assign_rhs2 (next_stmt) == lhs) |
| { |
| tree op = gimple_assign_rhs1 (next_stmt); |
| gimple def_stmt = NULL; |
| |
| if (TREE_CODE (op) == SSA_NAME) |
| def_stmt = SSA_NAME_DEF_STMT (op); |
| |
| /* Check that the other def is either defined in the loop |
| ("vect_internal_def"), or it's an induction (defined by a |
| loop-header phi-node). */ |
| if (def_stmt |
| && gimple_bb (def_stmt) |
| && flow_bb_inside_loop_p (loop, gimple_bb (def_stmt)) |
| && (is_gimple_assign (def_stmt) |
| || is_gimple_call (def_stmt) |
| || STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt)) |
| == vect_induction_def |
| || (gimple_code (def_stmt) == GIMPLE_PHI |
| && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt)) |
| == vect_internal_def |
| && !is_loop_header_bb_p (gimple_bb (def_stmt))))) |
| { |
| lhs = gimple_assign_lhs (next_stmt); |
| next_stmt = GROUP_NEXT_ELEMENT (vinfo_for_stmt (next_stmt)); |
| continue; |
| } |
| |
| return false; |
| } |
| else |
| { |
| tree op = gimple_assign_rhs2 (next_stmt); |
| gimple def_stmt = NULL; |
| |
| if (TREE_CODE (op) == SSA_NAME) |
| def_stmt = SSA_NAME_DEF_STMT (op); |
| |
| /* Check that the other def is either defined in the loop |
| ("vect_internal_def"), or it's an induction (defined by a |
| loop-header phi-node). */ |
| if (def_stmt |
| && gimple_bb (def_stmt) |
| && flow_bb_inside_loop_p (loop, gimple_bb (def_stmt)) |
| && (is_gimple_assign (def_stmt) |
| || is_gimple_call (def_stmt) |
| || STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt)) |
| == vect_induction_def |
| || (gimple_code (def_stmt) == GIMPLE_PHI |
| && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt)) |
| == vect_internal_def |
| && !is_loop_header_bb_p (gimple_bb (def_stmt))))) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "swapping oprnds: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, next_stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| swap_ssa_operands (next_stmt, |
| gimple_assign_rhs1_ptr (next_stmt), |
| gimple_assign_rhs2_ptr (next_stmt)); |
| update_stmt (next_stmt); |
| |
| if (CONSTANT_CLASS_P (gimple_assign_rhs1 (next_stmt))) |
| LOOP_VINFO_OPERANDS_SWAPPED (loop_info) = true; |
| } |
| else |
| return false; |
| } |
| |
| lhs = gimple_assign_lhs (next_stmt); |
| next_stmt = GROUP_NEXT_ELEMENT (vinfo_for_stmt (next_stmt)); |
| } |
| |
| /* Save the chain for further analysis in SLP detection. */ |
| first = GROUP_FIRST_ELEMENT (vinfo_for_stmt (current_stmt)); |
| LOOP_VINFO_REDUCTION_CHAINS (loop_info).safe_push (first); |
| GROUP_SIZE (vinfo_for_stmt (first)) = size; |
| |
| return true; |
| } |
| |
| |
| /* Function vect_is_simple_reduction_1 |
| |
| (1) Detect a cross-iteration def-use cycle that represents a simple |
| reduction computation. We look for the following pattern: |
| |
| loop_header: |
| a1 = phi < a0, a2 > |
| a3 = ... |
| a2 = operation (a3, a1) |
| |
| or |
| |
| a3 = ... |
| loop_header: |
| a1 = phi < a0, a2 > |
| a2 = operation (a3, a1) |
| |
| such that: |
| 1. operation is commutative and associative and it is safe to |
| change the order of the computation (if CHECK_REDUCTION is true) |
| 2. no uses for a2 in the loop (a2 is used out of the loop) |
| 3. no uses of a1 in the loop besides the reduction operation |
| 4. no uses of a1 outside the loop. |
| |
| Conditions 1,4 are tested here. |
| Conditions 2,3 are tested in vect_mark_stmts_to_be_vectorized. |
| |
| (2) Detect a cross-iteration def-use cycle in nested loops, i.e., |
| nested cycles, if CHECK_REDUCTION is false. |
| |
| (3) Detect cycles of phi nodes in outer-loop vectorization, i.e., double |
| reductions: |
| |
| a1 = phi < a0, a2 > |
| inner loop (def of a3) |
| a2 = phi < a3 > |
| |
| If MODIFY is true it tries also to rework the code in-place to enable |
| detection of more reduction patterns. For the time being we rewrite |
| "res -= RHS" into "rhs += -RHS" when it seems worthwhile. |
| */ |
| |
| static gimple |
| vect_is_simple_reduction_1 (loop_vec_info loop_info, gimple phi, |
| bool check_reduction, bool *double_reduc, |
| bool modify) |
| { |
| struct loop *loop = (gimple_bb (phi))->loop_father; |
| struct loop *vect_loop = LOOP_VINFO_LOOP (loop_info); |
| edge latch_e = loop_latch_edge (loop); |
| tree loop_arg = PHI_ARG_DEF_FROM_EDGE (phi, latch_e); |
| gimple def_stmt, def1 = NULL, def2 = NULL; |
| enum tree_code orig_code, code; |
| tree op1, op2, op3 = NULL_TREE, op4 = NULL_TREE; |
| tree type; |
| int nloop_uses; |
| tree name; |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| bool phi_def; |
| |
| *double_reduc = false; |
| |
| /* If CHECK_REDUCTION is true, we assume inner-most loop vectorization, |
| otherwise, we assume outer loop vectorization. */ |
| gcc_assert ((check_reduction && loop == vect_loop) |
| || (!check_reduction && flow_loop_nested_p (vect_loop, loop))); |
| |
| name = PHI_RESULT (phi); |
| /* ??? If there are no uses of the PHI result the inner loop reduction |
| won't be detected as possibly double-reduction by vectorizable_reduction |
| because that tries to walk the PHI arg from the preheader edge which |
| can be constant. See PR60382. */ |
| if (has_zero_uses (name)) |
| return NULL; |
| nloop_uses = 0; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, name) |
| { |
| gimple use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| |
| if (!flow_bb_inside_loop_p (loop, gimple_bb (use_stmt))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "intermediate value used outside loop.\n"); |
| |
| return NULL; |
| } |
| |
| if (vinfo_for_stmt (use_stmt) |
| && !is_pattern_stmt_p (vinfo_for_stmt (use_stmt))) |
| nloop_uses++; |
| if (nloop_uses > 1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduction used in loop.\n"); |
| return NULL; |
| } |
| } |
| |
| if (TREE_CODE (loop_arg) != SSA_NAME) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduction: not ssa_name: "); |
| dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, loop_arg); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return NULL; |
| } |
| |
| def_stmt = SSA_NAME_DEF_STMT (loop_arg); |
| if (!def_stmt) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduction: no def_stmt.\n"); |
| return NULL; |
| } |
| |
| if (!is_gimple_assign (def_stmt) && gimple_code (def_stmt) != GIMPLE_PHI) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, def_stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| return NULL; |
| } |
| |
| if (is_gimple_assign (def_stmt)) |
| { |
| name = gimple_assign_lhs (def_stmt); |
| phi_def = false; |
| } |
| else |
| { |
| name = PHI_RESULT (def_stmt); |
| phi_def = true; |
| } |
| |
| nloop_uses = 0; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, name) |
| { |
| gimple use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| if (flow_bb_inside_loop_p (loop, gimple_bb (use_stmt)) |
| && vinfo_for_stmt (use_stmt) |
| && !is_pattern_stmt_p (vinfo_for_stmt (use_stmt))) |
| nloop_uses++; |
| if (nloop_uses > 1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduction used in loop.\n"); |
| return NULL; |
| } |
| } |
| |
| /* If DEF_STMT is a phi node itself, we expect it to have a single argument |
| defined in the inner loop. */ |
| if (phi_def) |
| { |
| op1 = PHI_ARG_DEF (def_stmt, 0); |
| |
| if (gimple_phi_num_args (def_stmt) != 1 |
| || TREE_CODE (op1) != SSA_NAME) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported phi node definition.\n"); |
| |
| return NULL; |
| } |
| |
| def1 = SSA_NAME_DEF_STMT (op1); |
| if (gimple_bb (def1) |
| && flow_bb_inside_loop_p (loop, gimple_bb (def_stmt)) |
| && loop->inner |
| && flow_bb_inside_loop_p (loop->inner, gimple_bb (def1)) |
| && is_gimple_assign (def1)) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, |
| "detected double reduction: "); |
| |
| *double_reduc = true; |
| return def_stmt; |
| } |
| |
| return NULL; |
| } |
| |
| code = orig_code = gimple_assign_rhs_code (def_stmt); |
| |
| /* We can handle "res -= x[i]", which is non-associative by |
| simply rewriting this into "res += -x[i]". Avoid changing |
| gimple instruction for the first simple tests and only do this |
| if we're allowed to change code at all. */ |
| if (code == MINUS_EXPR |
| && modify |
| && (op1 = gimple_assign_rhs1 (def_stmt)) |
| && TREE_CODE (op1) == SSA_NAME |
| && SSA_NAME_DEF_STMT (op1) == phi) |
| code = PLUS_EXPR; |
| |
| if (check_reduction |
| && (!commutative_tree_code (code) || !associative_tree_code (code))) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: not commutative/associative: "); |
| return NULL; |
| } |
| |
| if (get_gimple_rhs_class (code) != GIMPLE_BINARY_RHS) |
| { |
| if (code != COND_EXPR) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: not binary operation: "); |
| |
| return NULL; |
| } |
| |
| op3 = gimple_assign_rhs1 (def_stmt); |
| if (COMPARISON_CLASS_P (op3)) |
| { |
| op4 = TREE_OPERAND (op3, 1); |
| op3 = TREE_OPERAND (op3, 0); |
| } |
| |
| op1 = gimple_assign_rhs2 (def_stmt); |
| op2 = gimple_assign_rhs3 (def_stmt); |
| |
| if (TREE_CODE (op1) != SSA_NAME && TREE_CODE (op2) != SSA_NAME) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: uses not ssa_names: "); |
| |
| return NULL; |
| } |
| } |
| else |
| { |
| op1 = gimple_assign_rhs1 (def_stmt); |
| op2 = gimple_assign_rhs2 (def_stmt); |
| |
| if (TREE_CODE (op1) != SSA_NAME && TREE_CODE (op2) != SSA_NAME) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: uses not ssa_names: "); |
| |
| return NULL; |
| } |
| } |
| |
| type = TREE_TYPE (gimple_assign_lhs (def_stmt)); |
| if ((TREE_CODE (op1) == SSA_NAME |
| && !types_compatible_p (type,TREE_TYPE (op1))) |
| || (TREE_CODE (op2) == SSA_NAME |
| && !types_compatible_p (type, TREE_TYPE (op2))) |
| || (op3 && TREE_CODE (op3) == SSA_NAME |
| && !types_compatible_p (type, TREE_TYPE (op3))) |
| || (op4 && TREE_CODE (op4) == SSA_NAME |
| && !types_compatible_p (type, TREE_TYPE (op4)))) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "reduction: multiple types: operation type: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, type); |
| dump_printf (MSG_NOTE, ", operands types: "); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, |
| TREE_TYPE (op1)); |
| dump_printf (MSG_NOTE, ","); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, |
| TREE_TYPE (op2)); |
| if (op3) |
| { |
| dump_printf (MSG_NOTE, ","); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, |
| TREE_TYPE (op3)); |
| } |
| |
| if (op4) |
| { |
| dump_printf (MSG_NOTE, ","); |
| dump_generic_expr (MSG_NOTE, TDF_SLIM, |
| TREE_TYPE (op4)); |
| } |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| return NULL; |
| } |
| |
| /* Check that it's ok to change the order of the computation. |
| Generally, when vectorizing a reduction we change the order of the |
| computation. This may change the behavior of the program in some |
| cases, so we need to check that this is ok. One exception is when |
| vectorizing an outer-loop: the inner-loop is executed sequentially, |
| and therefore vectorizing reductions in the inner-loop during |
| outer-loop vectorization is safe. */ |
| |
| /* CHECKME: check for !flag_finite_math_only too? */ |
| if (SCALAR_FLOAT_TYPE_P (type) && !flag_associative_math |
| && check_reduction) |
| { |
| /* Changing the order of operations changes the semantics. */ |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: unsafe fp math optimization: "); |
| return NULL; |
| } |
| else if (INTEGRAL_TYPE_P (type) && TYPE_OVERFLOW_TRAPS (type) |
| && check_reduction) |
| { |
| /* Changing the order of operations changes the semantics. */ |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: unsafe int math optimization: "); |
| return NULL; |
| } |
| else if (SAT_FIXED_POINT_TYPE_P (type) && check_reduction) |
| { |
| /* Changing the order of operations changes the semantics. */ |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: unsafe fixed-point math optimization: "); |
| return NULL; |
| } |
| |
| /* If we detected "res -= x[i]" earlier, rewrite it into |
| "res += -x[i]" now. If this turns out to be useless reassoc |
| will clean it up again. */ |
| if (orig_code == MINUS_EXPR) |
| { |
| tree rhs = gimple_assign_rhs2 (def_stmt); |
| tree negrhs = make_ssa_name (TREE_TYPE (rhs), NULL); |
| gimple negate_stmt = gimple_build_assign_with_ops (NEGATE_EXPR, negrhs, |
| rhs, NULL); |
| gimple_stmt_iterator gsi = gsi_for_stmt (def_stmt); |
| set_vinfo_for_stmt (negate_stmt, new_stmt_vec_info (negate_stmt, |
| loop_info, NULL)); |
| gsi_insert_before (&gsi, negate_stmt, GSI_NEW_STMT); |
| gimple_assign_set_rhs2 (def_stmt, negrhs); |
| gimple_assign_set_rhs_code (def_stmt, PLUS_EXPR); |
| update_stmt (def_stmt); |
| } |
| |
| /* Reduction is safe. We're dealing with one of the following: |
| 1) integer arithmetic and no trapv |
| 2) floating point arithmetic, and special flags permit this optimization |
| 3) nested cycle (i.e., outer loop vectorization). */ |
| if (TREE_CODE (op1) == SSA_NAME) |
| def1 = SSA_NAME_DEF_STMT (op1); |
| |
| if (TREE_CODE (op2) == SSA_NAME) |
| def2 = SSA_NAME_DEF_STMT (op2); |
| |
| if (code != COND_EXPR |
| && ((!def1 || gimple_nop_p (def1)) && (!def2 || gimple_nop_p (def2)))) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, "reduction: no defs for operands: "); |
| return NULL; |
| } |
| |
| /* Check that one def is the reduction def, defined by PHI, |
| the other def is either defined in the loop ("vect_internal_def"), |
| or it's an induction (defined by a loop-header phi-node). */ |
| |
| if (def2 && def2 == phi |
| && (code == COND_EXPR |
| || !def1 || gimple_nop_p (def1) |
| || !flow_bb_inside_loop_p (loop, gimple_bb (def1)) |
| || (def1 && flow_bb_inside_loop_p (loop, gimple_bb (def1)) |
| && (is_gimple_assign (def1) |
| || is_gimple_call (def1) |
| || STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def1)) |
| == vect_induction_def |
| || (gimple_code (def1) == GIMPLE_PHI |
| && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def1)) |
| == vect_internal_def |
| && !is_loop_header_bb_p (gimple_bb (def1))))))) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, "detected reduction: "); |
| return def_stmt; |
| } |
| |
| if (def1 && def1 == phi |
| && (code == COND_EXPR |
| || !def2 || gimple_nop_p (def2) |
| || !flow_bb_inside_loop_p (loop, gimple_bb (def2)) |
| || (def2 && flow_bb_inside_loop_p (loop, gimple_bb (def2)) |
| && (is_gimple_assign (def2) |
| || is_gimple_call (def2) |
| || STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def2)) |
| == vect_induction_def |
| || (gimple_code (def2) == GIMPLE_PHI |
| && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def2)) |
| == vect_internal_def |
| && !is_loop_header_bb_p (gimple_bb (def2))))))) |
| { |
| if (check_reduction) |
| { |
| /* Swap operands (just for simplicity - so that the rest of the code |
| can assume that the reduction variable is always the last (second) |
| argument). */ |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, |
| "detected reduction: need to swap operands: "); |
| |
| swap_ssa_operands (def_stmt, gimple_assign_rhs1_ptr (def_stmt), |
| gimple_assign_rhs2_ptr (def_stmt)); |
| |
| if (CONSTANT_CLASS_P (gimple_assign_rhs1 (def_stmt))) |
| LOOP_VINFO_OPERANDS_SWAPPED (loop_info) = true; |
| } |
| else |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, "detected reduction: "); |
| } |
| |
| return def_stmt; |
| } |
| |
| /* Try to find SLP reduction chain. */ |
| if (check_reduction && vect_is_slp_reduction (loop_info, phi, def_stmt)) |
| { |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_NOTE, def_stmt, |
| "reduction: detected reduction chain: "); |
| |
| return def_stmt; |
| } |
| |
| if (dump_enabled_p ()) |
| report_vect_op (MSG_MISSED_OPTIMIZATION, def_stmt, |
| "reduction: unknown pattern: "); |
| |
| return NULL; |
| } |
| |
| /* Wrapper around vect_is_simple_reduction_1, that won't modify code |
| in-place. Arguments as there. */ |
| |
| static gimple |
| vect_is_simple_reduction (loop_vec_info loop_info, gimple phi, |
| bool check_reduction, bool *double_reduc) |
| { |
| return vect_is_simple_reduction_1 (loop_info, phi, check_reduction, |
| double_reduc, false); |
| } |
| |
| /* Wrapper around vect_is_simple_reduction_1, which will modify code |
| in-place if it enables detection of more reductions. Arguments |
| as there. */ |
| |
| gimple |
| vect_force_simple_reduction (loop_vec_info loop_info, gimple phi, |
| bool check_reduction, bool *double_reduc) |
| { |
| return vect_is_simple_reduction_1 (loop_info, phi, check_reduction, |
| double_reduc, true); |
| } |
| |
| /* Calculate the cost of one scalar iteration of the loop. */ |
| int |
| vect_get_single_scalar_iteration_cost (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| int nbbs = loop->num_nodes, factor, scalar_single_iter_cost = 0; |
| int innerloop_iters, i, stmt_cost; |
| |
| /* Count statements in scalar loop. Using this as scalar cost for a single |
| iteration for now. |
| |
| TODO: Add outer loop support. |
| |
| TODO: Consider assigning different costs to different scalar |
| statements. */ |
| |
| /* FORNOW. */ |
| innerloop_iters = 1; |
| if (loop->inner) |
| innerloop_iters = 50; /* FIXME */ |
| |
| for (i = 0; i < nbbs; i++) |
| { |
| gimple_stmt_iterator si; |
| basic_block bb = bbs[i]; |
| |
| if (bb->loop_father == loop->inner) |
| factor = innerloop_iters; |
| else |
| factor = 1; |
| |
| for (si = gsi_start_bb (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| gimple stmt = gsi_stmt (si); |
| stmt_vec_info stmt_info = vinfo_for_stmt (stmt); |
| |
| if (!is_gimple_assign (stmt) && !is_gimple_call (stmt)) |
| continue; |
| |
| /* Skip stmts that are not vectorized inside the loop. */ |
| if (stmt_info |
| && !STMT_VINFO_RELEVANT_P (stmt_info) |
| && (!STMT_VINFO_LIVE_P (stmt_info) |
| || !VECTORIZABLE_CYCLE_DEF (STMT_VINFO_DEF_TYPE (stmt_info))) |
| && !STMT_VINFO_IN_PATTERN_P (stmt_info)) |
| continue; |
| |
| if (STMT_VINFO_DATA_REF (vinfo_for_stmt (stmt))) |
| { |
| if (DR_IS_READ (STMT_VINFO_DATA_REF (vinfo_for_stmt (stmt)))) |
| stmt_cost = vect_get_stmt_cost (scalar_load); |
| else |
| stmt_cost = vect_get_stmt_cost (scalar_store); |
| } |
| else |
| stmt_cost = vect_get_stmt_cost (scalar_stmt); |
| |
| scalar_single_iter_cost += stmt_cost * factor; |
| } |
| } |
| return scalar_single_iter_cost; |
| } |
| |
| /* Calculate cost of peeling the loop PEEL_ITERS_PROLOGUE times. */ |
| int |
| vect_get_known_peeling_cost (loop_vec_info loop_vinfo, int peel_iters_prologue, |
| int *peel_iters_epilogue, |
| int scalar_single_iter_cost, |
| stmt_vector_for_cost *prologue_cost_vec, |
| stmt_vector_for_cost *epilogue_cost_vec) |
| { |
| int retval = 0; |
| int vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| |
| if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| { |
| *peel_iters_epilogue = vf/2; |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "cost model: epilogue peel iters set to vf/2 " |
| "because loop iterations are unknown .\n"); |
| |
| /* If peeled iterations are known but number of scalar loop |
| iterations are unknown, count a taken branch per peeled loop. */ |
| retval = record_stmt_cost (prologue_cost_vec, 2, cond_branch_taken, |
| NULL, 0, vect_prologue); |
| } |
| else |
| { |
| int niters = LOOP_VINFO_INT_NITERS (loop_vinfo); |
| peel_iters_prologue = niters < peel_iters_prologue ? |
| niters : peel_iters_prologue; |
| *peel_iters_epilogue = (niters - peel_iters_prologue) % vf; |
| /* If we need to peel for gaps, but no peeling is required, we have to |
| peel VF iterations. */ |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) && !*peel_iters_epilogue) |
| *peel_iters_epilogue = vf; |
| } |
| |
| if (peel_iters_prologue) |
| retval += record_stmt_cost (prologue_cost_vec, |
| peel_iters_prologue * scalar_single_iter_cost, |
| scalar_stmt, NULL, 0, vect_prologue); |
| if (*peel_iters_epilogue) |
| retval += record_stmt_cost (epilogue_cost_vec, |
| *peel_iters_epilogue * scalar_single_iter_cost, |
| scalar_stmt, NULL, 0, vect_epilogue); |
| return retval; |
| } |
| |
| /* Function vect_estimate_min_profitable_iters |
| |
| Return the number of iterations required for the vector version of the |
| loop to be profitable relative to the cost of the scalar version of the |
| loop. */ |
| |
| static void |
| vect_estimate_min_profitable_iters (loop_vec_info loop_vinfo, |
| int *ret_min_profitable_niters, |
| int *ret_min_profitable_estimate) |
| { |
| int min_profitable_iters; |
| int min_profitable_estimate; |
| int peel_iters_prologue; |
| int peel_iters_epilogue; |
| unsigned vec_inside_cost = 0; |
| int vec_outside_cost = 0; |
| unsigned vec_prologue_cost = 0; |
| unsigned vec_epilogue_cost = 0; |
| int scalar_single_iter_cost = 0; |
| int scalar_outside_cost = 0; |
| int vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| int npeel = LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo); |
| void *target_cost_data = LOOP_VINFO_TARGET_COST_DATA (loop_vinfo); |
| |
| /* Cost model disabled. */ |
| if (unlimited_cost_model (LOOP_VINFO_LOOP (loop_vinfo))) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "cost model disabled.\n"); |
| *ret_min_profitable_niters = 0; |
| *ret_min_profitable_estimate = 0; |
| return; |
| } |
| |
| /* Requires loop versioning tests to handle misalignment. */ |
| if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo)) |
| { |
| /* FIXME: Make cost depend on complexity of individual check. */ |
| unsigned len = LOOP_VINFO_MAY_MISALIGN_STMTS (loop_vinfo).length (); |
| (void) add_stmt_cost (target_cost_data, len, vector_stmt, NULL, 0, |
| vect_prologue); |
| dump_printf (MSG_NOTE, |
| "cost model: Adding cost of checks for loop " |
| "versioning to treat misalignment.\n"); |
| } |
| |
| /* Requires loop versioning with alias checks. */ |
| if (LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo)) |
| { |
| /* FIXME: Make cost depend on complexity of individual check. */ |
| unsigned len = LOOP_VINFO_MAY_ALIAS_DDRS (loop_vinfo).length (); |
| (void) add_stmt_cost (target_cost_data, len, vector_stmt, NULL, 0, |
| vect_prologue); |
| dump_printf (MSG_NOTE, |
| "cost model: Adding cost of checks for loop " |
| "versioning aliasing.\n"); |
| } |
| |
| if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo) |
| || LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo)) |
| (void) add_stmt_cost (target_cost_data, 1, cond_branch_taken, NULL, 0, |
| vect_prologue); |
| |
| /* Count statements in scalar loop. Using this as scalar cost for a single |
| iteration for now. |
| |
| TODO: Add outer loop support. |
| |
| TODO: Consider assigning different costs to different scalar |
| statements. */ |
| |
| scalar_single_iter_cost = vect_get_single_scalar_iteration_cost (loop_vinfo); |
| |
| /* Add additional cost for the peeled instructions in prologue and epilogue |
| loop. |
| |
| FORNOW: If we don't know the value of peel_iters for prologue or epilogue |
| at compile-time - we assume it's vf/2 (the worst would be vf-1). |
| |
| TODO: Build an expression that represents peel_iters for prologue and |
| epilogue to be used in a run-time test. */ |
| |
| if (npeel < 0) |
| { |
| peel_iters_prologue = vf/2; |
| dump_printf (MSG_NOTE, "cost model: " |
| "prologue peel iters set to vf/2.\n"); |
| |
| /* If peeling for alignment is unknown, loop bound of main loop becomes |
| unknown. */ |
| peel_iters_epilogue = vf/2; |
| dump_printf (MSG_NOTE, "cost model: " |
| "epilogue peel iters set to vf/2 because " |
| "peeling for alignment is unknown.\n"); |
| |
| /* If peeled iterations are unknown, count a taken branch and a not taken |
| branch per peeled loop. Even if scalar loop iterations are known, |
| vector iterations are not known since peeled prologue iterations are |
| not known. Hence guards remain the same. */ |
| (void) add_stmt_cost (target_cost_data, 2, cond_branch_taken, |
| NULL, 0, vect_prologue); |
| (void) add_stmt_cost (target_cost_data, 2, cond_branch_not_taken, |
| NULL, 0, vect_prologue); |
| /* FORNOW: Don't attempt to pass individual scalar instructions to |
| the model; just assume linear cost for scalar iterations. */ |
| (void) add_stmt_cost (target_cost_data, |
| peel_iters_prologue * scalar_single_iter_cost, |
| scalar_stmt, NULL, 0, vect_prologue); |
| (void) add_stmt_cost (target_cost_data, |
| peel_iters_epilogue * scalar_single_iter_cost, |
| scalar_stmt, NULL, 0, vect_epilogue); |
| } |
| else |
| { |
| stmt_vector_for_cost prologue_cost_vec, epilogue_cost_vec; |
| stmt_info_for_cost *si; |
| int j; |
| void *data = LOOP_VINFO_TARGET_COST_DATA (loop_vinfo); |
| |
| prologue_cost_vec.create (2); |
| epilogue_cost_vec.create (2); |
| peel_iters_prologue = npeel; |
| |
| (void) vect_get_known_peeling_cost (loop_vinfo, peel_iters_prologue, |
| &peel_iters_epilogue, |
| scalar_single_iter_cost, |
| &prologue_cost_vec, |
| &epilogue_cost_vec); |
| |
| FOR_EACH_VEC_ELT (prologue_cost_vec, j, si) |
| { |
| struct _stmt_vec_info *stmt_info |
| = si->stmt ? vinfo_for_stmt (si->stmt) : NULL; |
| (void) add_stmt_cost (data, si->count, si->kind, stmt_info, |
| si->misalign, vect_prologue); |
| } |
| |
| FOR_EACH_VEC_ELT (epilogue_cost_vec, j, si) |
| { |
| struct _stmt_vec_info *stmt_info |
| = si->stmt ? vinfo_for_stmt (si->stmt) : NULL; |
| (void) add_stmt_cost (data, si->count, si->kind, stmt_info, |
| si->misalign, vect_epilogue); |
| } |
| |
| prologue_cost_vec.release (); |
| epilogue_cost_vec.release (); |
| } |
| |
| /* FORNOW: The scalar outside cost is incremented in one of the |
| following ways: |
| |
| 1. The vectorizer checks for alignment and aliasing and generates |
| a condition that allows dynamic vectorization. A cost model |
| check is ANDED with the versioning condition. Hence scalar code |
| path now has the added cost of the versioning check. |
| |
| if (cost > th & versioning_check) |
| jmp to vector code |
| |
| Hence run-time scalar is incremented by not-taken branch cost. |
| |
| 2. The vectorizer then checks if a prologue is required. If the |
| cost model check was not done before during versioning, it has to |
| be done before the prologue check. |
| |
| if (cost <= th) |
| prologue = scalar_iters |
| if (prologue == 0) |
| jmp to vector code |
| else |
| execute prologue |
| if (prologue == num_iters) |
| go to exit |
| |
| Hence the run-time scalar cost is incremented by a taken branch, |
| plus a not-taken branch, plus a taken branch cost. |
| |
| 3. The vectorizer then checks if an epilogue is required. If the |
| cost model check was not done before during prologue check, it |
| has to be done with the epilogue check. |
| |
| if (prologue == 0) |
| jmp to vector code |
| else |
| execute prologue |
| if (prologue == num_iters) |
| go to exit |
| vector code: |
| if ((cost <= th) | (scalar_iters-prologue-epilogue == 0)) |
| jmp to epilogue |
| |
| Hence the run-time scalar cost should be incremented by 2 taken |
| branches. |
| |
| TODO: The back end may reorder the BBS's differently and reverse |
| conditions/branch directions. Change the estimates below to |
| something more reasonable. */ |
| |
| /* If the number of iterations is known and we do not do versioning, we can |
| decide whether to vectorize at compile time. Hence the scalar version |
| do not carry cost model guard costs. */ |
| if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo) |
| || LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo) |
| || LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo)) |
| { |
| /* Cost model check occurs at versioning. */ |
| if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo) |
| || LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo)) |
| scalar_outside_cost += vect_get_stmt_cost (cond_branch_not_taken); |
| else |
| { |
| /* Cost model check occurs at prologue generation. */ |
| if (LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo) < 0) |
| scalar_outside_cost += 2 * vect_get_stmt_cost (cond_branch_taken) |
| + vect_get_stmt_cost (cond_branch_not_taken); |
| /* Cost model check occurs at epilogue generation. */ |
| else |
| scalar_outside_cost += 2 * vect_get_stmt_cost (cond_branch_taken); |
| } |
| } |
| |
| /* Complete the target-specific cost calculations. */ |
| finish_cost (LOOP_VINFO_TARGET_COST_DATA (loop_vinfo), &vec_prologue_cost, |
| &vec_inside_cost, &vec_epilogue_cost); |
| |
| vec_outside_cost = (int)(vec_prologue_cost + vec_epilogue_cost); |
| |
| /* Calculate number of iterations required to make the vector version |
| profitable, relative to the loop bodies only. The following condition |
| must hold true: |
| SIC * niters + SOC > VIC * ((niters-PL_ITERS-EP_ITERS)/VF) + VOC |
| where |
| SIC = scalar iteration cost, VIC = vector iteration cost, |
| VOC = vector outside cost, VF = vectorization factor, |
| PL_ITERS = prologue iterations, EP_ITERS= epilogue iterations |
| SOC = scalar outside cost for run time cost model check. */ |
| |
| if ((scalar_single_iter_cost * vf) > (int) vec_inside_cost) |
| { |
| if (vec_outside_cost <= 0) |
| min_profitable_iters = 1; |
| else |
| { |
| min_profitable_iters = ((vec_outside_cost - scalar_outside_cost) * vf |
| - vec_inside_cost * peel_iters_prologue |
| - vec_inside_cost * peel_iters_epilogue) |
| / ((scalar_single_iter_cost * vf) |
| - vec_inside_cost); |
| |
| if ((scalar_single_iter_cost * vf * min_profitable_iters) |
| <= (((int) vec_inside_cost * min_profitable_iters) |
| + (((int) vec_outside_cost - scalar_outside_cost) * vf))) |
| min_profitable_iters++; |
| } |
| } |
| /* vector version will never be profitable. */ |
| else |
| { |
| if (LOOP_VINFO_LOOP (loop_vinfo)->force_vect) |
| warning_at (vect_location, OPT_Wopenmp_simd, "vectorization " |
| "did not happen for a simd loop"); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "cost model: the vector iteration cost = %d " |
| "divided by the scalar iteration cost = %d " |
| "is greater or equal to the vectorization factor = %d" |
| ".\n", |
| vec_inside_cost, scalar_single_iter_cost, vf); |
| *ret_min_profitable_niters = -1; |
| *ret_min_profitable_estimate = -1; |
| return; |
| } |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, "Cost model analysis: \n"); |
| dump_printf (MSG_NOTE, " Vector inside of loop cost: %d\n", |
| vec_inside_cost); |
| dump_printf (MSG_NOTE, " Vector prologue cost: %d\n", |
| vec_prologue_cost); |
| dump_printf (MSG_NOTE, " Vector epilogue cost: %d\n", |
| vec_epilogue_cost); |
| dump_printf (MSG_NOTE, " Scalar iteration cost: %d\n", |
| scalar_single_iter_cost); |
| dump_printf (MSG_NOTE, " Scalar outside cost: %d\n", |
| scalar_outside_cost); |
| dump_printf (MSG_NOTE, " Vector outside cost: %d\n", |
| vec_outside_cost); |
| dump_printf (MSG_NOTE, " prologue iterations: %d\n", |
| peel_iters_prologue); |
| dump_printf (MSG_NOTE, " epilogue iterations: %d\n", |
| peel_iters_epilogue); |
| dump_printf (MSG_NOTE, |
| " Calculated minimum iters for profitability: %d\n", |
| min_profitable_iters); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| min_profitable_iters = |
| min_profitable_iters < vf ? vf : min_profitable_iters; |
| |
| /* Because the condition we create is: |
| if (niters <= min_profitable_iters) |
| then skip the vectorized loop. */ |
| min_profitable_iters--; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| " Runtime profitability threshold = %d\n", |
| min_profitable_iters); |
| |
| *ret_min_profitable_niters = min_profitable_iters; |
| |
| /* Calculate number of iterations required to make the vector version |
| profitable, relative to the loop bodies only. |
| |
| Non-vectorized variant is SIC * niters and it must win over vector |
| variant on the expected loop trip count. The following condition must hold true: |
| SIC * niters > VIC * ((niters-PL_ITERS-EP_ITERS)/VF) + VOC + SOC */ |
| |
| if (vec_outside_cost <= 0) |
| min_profitable_estimate = 1; |
| else |
| { |
| min_profitable_estimate = ((vec_outside_cost + scalar_outside_cost) * vf |
| - vec_inside_cost * peel_iters_prologue |
| - vec_inside_cost * peel_iters_epilogue) |
| / ((scalar_single_iter_cost * vf) |
| - vec_inside_cost); |
| } |
| min_profitable_estimate --; |
| min_profitable_estimate = MAX (min_profitable_estimate, min_profitable_iters); |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| " Static estimate profitability threshold = %d\n", |
| min_profitable_iters); |
| |
| *ret_min_profitable_estimate = min_profitable_estimate; |
| } |
| |
| |
| /* TODO: Close dependency between vect_model_*_cost and vectorizable_* |
| functions. Design better to avoid maintenance issues. */ |
| |
| /* Function vect_model_reduction_cost. |
| |
| Models cost for a reduction operation, including the vector ops |
| generated within the strip-mine loop, the initial definition before |
| the loop, and the epilogue code that must be generated. */ |
| |
| static bool |
| vect_model_reduction_cost (stmt_vec_info stmt_info, enum tree_code reduc_code, |
| int ncopies) |
| { |
| int prologue_cost = 0, epilogue_cost = 0; |
| enum tree_code code; |
| optab optab; |
| tree vectype; |
| gimple stmt, orig_stmt; |
| tree reduction_op; |
| enum machine_mode mode; |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| void *target_cost_data = LOOP_VINFO_TARGET_COST_DATA (loop_vinfo); |
| |
| /* Cost of reduction op inside loop. */ |
| unsigned inside_cost = add_stmt_cost (target_cost_data, ncopies, vector_stmt, |
| stmt_info, 0, vect_body); |
| stmt = STMT_VINFO_STMT (stmt_info); |
| |
| switch (get_gimple_rhs_class (gimple_assign_rhs_code (stmt))) |
| { |
| case GIMPLE_SINGLE_RHS: |
| gcc_assert (TREE_OPERAND_LENGTH (gimple_assign_rhs1 (stmt)) == ternary_op); |
| reduction_op = TREE_OPERAND (gimple_assign_rhs1 (stmt), 2); |
| break; |
| case GIMPLE_UNARY_RHS: |
| reduction_op = gimple_assign_rhs1 (stmt); |
| break; |
| case GIMPLE_BINARY_RHS: |
| reduction_op = gimple_assign_rhs2 (stmt); |
| break; |
| case GIMPLE_TERNARY_RHS: |
| reduction_op = gimple_assign_rhs3 (stmt); |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| |
| vectype = get_vectype_for_scalar_type (TREE_TYPE (reduction_op)); |
| if (!vectype) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported data-type "); |
| dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, |
| TREE_TYPE (reduction_op)); |
| dump_printf (MSG_MISSED_OPTIMIZATION, "\n"); |
| } |
| return false; |
| } |
| |
| mode = TYPE_MODE (vectype); |
| orig_stmt = STMT_VINFO_RELATED_STMT (stmt_info); |
| |
| if (!orig_stmt) |
| orig_stmt = STMT_VINFO_STMT (stmt_info); |
| |
| code = gimple_assign_rhs_code (orig_stmt); |
| |
| /* Add in cost for initial definition. */ |
| prologue_cost += add_stmt_cost (target_cost_data, 1, scalar_to_vec, |
| stmt_info, 0, vect_prologue); |
| |
| /* Determine cost of epilogue code. |
| |
| We have a reduction operator that will reduce the vector in one statement. |
| Also requires scalar extract. */ |
| |
| if (!nested_in_vect_loop_p (loop, orig_stmt)) |
| { |
| if (reduc_code != ERROR_MARK) |
| { |
| epilogue_cost += add_stmt_cost (target_cost_data, 1, vector_stmt, |
| stmt_info, 0, vect_epilogue); |
| epilogue_cost += add_stmt_cost (target_cost_data, 1, vec_to_scalar, |
| stmt_info, 0, vect_epilogue); |
| } |
| else |
| { |
| int vec_size_in_bits = tree_to_uhwi (TYPE_SIZE (vectype)); |
| tree bitsize = |
| TYPE_SIZE (TREE_TYPE (gimple_assign_lhs (orig_stmt))); |
| int element_bitsize = tree_to_uhwi (bitsize); |
| int nelements = vec_size_in_bits / element_bitsize; |
| |
| optab = optab_for_tree_code (code, vectype, optab_default); |
| |
| /* We have a whole vector shift available. */ |
| if (VECTOR_MODE_P (mode) |
| && optab_handler (optab, mode) != CODE_FOR_nothing |
| && optab_handler (vec_shr_optab, mode) != CODE_FOR_nothing) |
| { |
| /* Final reduction via vector shifts and the reduction operator. |
| Also requires scalar extract. */ |
| epilogue_cost += add_stmt_cost (target_cost_data, |
| exact_log2 (nelements) * 2, |
| vector_stmt, stmt_info, 0, |
| vect_epilogue); |
| epilogue_cost += add_stmt_cost (target_cost_data, 1, |
| vec_to_scalar, stmt_info, 0, |
| vect_epilogue); |
| } |
| else |
| /* Use extracts and reduction op for final reduction. For N |
| elements, we have N extracts and N-1 reduction ops. */ |
| epilogue_cost += add_stmt_cost (target_cost_data, |
| nelements + nelements - 1, |
| vector_stmt, stmt_info, 0, |
| vect_epilogue); |
| } |
| } |
| |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, |
| "vect_model_reduction_cost: inside_cost = %d, " |
| "prologue_cost = %d, epilogue_cost = %d .\n", inside_cost, |
| prologue_cost, epilogue_cost); |
| |
| return true; |
| } |
| |
| |
| /* Function vect_model_induction_cost. |
| |
| Models cost for induction operations. */ |
| |
| static void |
| vect_model_induction_cost (stmt_vec_info stmt_info, int ncopies) |
| { |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| void *target_cost_data = LOOP_VINFO_TARGET_COST_DATA (loop_vinfo); |
| unsigned inside_cost, prologue_cost; |
| |
| /* loop cost for vec_loop. */ |
| inside_cost = add_stmt_cost (target_cost_data, ncopies, vector_stmt, |
| stmt_info, 0, vect_body); |
| |
| /* prologue cost for vec_init and vec_step. */ |
| prologue_cost = add_stmt_cost (target_cost_data, 2, scalar_to_vec, |
| stmt_info, 0, vect_prologue); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "vect_model_induction_cost: inside_cost = %d, " |
| "prologue_cost = %d .\n", inside_cost, prologue_cost); |
| } |
| |
| |
| /* Function get_initial_def_for_induction |
| |
| Input: |
| STMT - a stmt that performs an induction operation in the loop. |
| IV_PHI - the initial value of the induction variable |
| |
| Output: |
| Return a vector variable, initialized with the first VF values of |
| the induction variable. E.g., for an iv with IV_PHI='X' and |
| evolution S, for a vector of 4 units, we want to return: |
| [X, X + S, X + 2*S, X + 3*S]. */ |
| |
| static tree |
| get_initial_def_for_induction (gimple iv_phi) |
| { |
| stmt_vec_info stmt_vinfo = vinfo_for_stmt (iv_phi); |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_vinfo); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| tree vectype; |
| int nunits; |
| edge pe = loop_preheader_edge (loop); |
| struct loop *iv_loop; |
| basic_block new_bb; |
| tree new_vec, vec_init, vec_step, t; |
| tree new_var; |
| tree new_name; |
| gimple init_stmt, induction_phi, new_stmt; |
| tree induc_def, vec_def, vec_dest; |
| tree init_expr, step_expr; |
| int vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| int i; |
| int ncopies; |
| tree expr; |
| stmt_vec_info phi_info = vinfo_for_stmt (iv_phi); |
| bool nested_in_vect_loop = false; |
| gimple_seq stmts = NULL; |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| gimple exit_phi; |
| edge latch_e; |
| tree loop_arg; |
| gimple_stmt_iterator si; |
| basic_block bb = gimple_bb (iv_phi); |
| tree stepvectype; |
| tree resvectype; |
| |
| /* Is phi in an inner-loop, while vectorizing an enclosing outer-loop? */ |
| if (nested_in_vect_loop_p (loop, iv_phi)) |
| { |
| nested_in_vect_loop = true; |
| iv_loop = loop->inner; |
| } |
| else |
| iv_loop = loop; |
| gcc_assert (iv_loop == (gimple_bb (iv_phi))->loop_father); |
| |
| latch_e = loop_latch_edge (iv_loop); |
| loop_arg = PHI_ARG_DEF_FROM_EDGE (iv_phi, latch_e); |
| |
| step_expr = STMT_VINFO_LOOP_PHI_EVOLUTION_PART (phi_info); |
| gcc_assert (step_expr != NULL_TREE); |
| |
| pe = loop_preheader_edge (iv_loop); |
| init_expr = PHI_ARG_DEF_FROM_EDGE (iv_phi, |
| loop_preheader_edge (iv_loop)); |
| |
| vectype = get_vectype_for_scalar_type (TREE_TYPE (init_expr)); |
| resvectype = get_vectype_for_scalar_type (TREE_TYPE (PHI_RESULT (iv_phi))); |
| gcc_assert (vectype); |
| nunits = TYPE_VECTOR_SUBPARTS (vectype); |
| ncopies = vf / nunits; |
| |
| gcc_assert (phi_info); |
| gcc_assert (ncopies >= 1); |
| |
| /* Convert the step to the desired type. */ |
| step_expr = force_gimple_operand (fold_convert (TREE_TYPE (vectype), |
| step_expr), |
| &stmts, true, NULL_TREE); |
| if (stmts) |
| { |
| new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts); |
| gcc_assert (!new_bb); |
| } |
| |
| /* Find the first insertion point in the BB. */ |
| si = gsi_after_labels (bb); |
| |
| /* Create the vector that holds the initial_value of the induction. */ |
| if (nested_in_vect_loop) |
| { |
| /* iv_loop is nested in the loop to be vectorized. init_expr had already |
| been created during vectorization of previous stmts. We obtain it |
| from the STMT_VINFO_VEC_STMT of the defining stmt. */ |
| vec_init = vect_get_vec_def_for_operand (init_expr, iv_phi, NULL); |
| /* If the initial value is not of proper type, convert it. */ |
| if (!useless_type_conversion_p (vectype, TREE_TYPE (vec_init))) |
| { |
| new_stmt = gimple_build_assign_with_ops |
| (VIEW_CONVERT_EXPR, |
| vect_get_new_vect_var (vectype, vect_simple_var, "vec_iv_"), |
| build1 (VIEW_CONVERT_EXPR, vectype, vec_init), NULL_TREE); |
| vec_init = make_ssa_name (gimple_assign_lhs (new_stmt), new_stmt); |
| gimple_assign_set_lhs (new_stmt, vec_init); |
| new_bb = gsi_insert_on_edge_immediate (loop_preheader_edge (iv_loop), |
| new_stmt); |
| gcc_assert (!new_bb); |
| set_vinfo_for_stmt (new_stmt, |
| new_stmt_vec_info (new_stmt, loop_vinfo, NULL)); |
| } |
| } |
| else |
| { |
| vec<constructor_elt, va_gc> *v; |
| |
| /* iv_loop is the loop to be vectorized. Create: |
| vec_init = [X, X+S, X+2*S, X+3*S] (S = step_expr, X = init_expr) */ |
| new_var = vect_get_new_vect_var (TREE_TYPE (vectype), |
| vect_scalar_var, "var_"); |
| new_name = force_gimple_operand (fold_convert (TREE_TYPE (vectype), |
| init_expr), |
| &stmts, false, new_var); |
| if (stmts) |
| { |
| new_bb = gsi_insert_seq_on_edge_immediate (pe, stmts); |
| gcc_assert (!new_bb); |
| } |
| |
| vec_alloc (v, nunits); |
| bool constant_p = is_gimple_min_invariant (new_name); |
| CONSTRUCTOR_APPEND_ELT (v, NULL_TREE, new_name); |
| for (i = 1; i < nunits; i++) |
| { |
| /* Create: new_name_i = new_name + step_expr */ |
| new_name = fold_build2 (PLUS_EXPR, TREE_TYPE (new_name), |
| new_name, step_expr); |
| if (!is_gimple_min_invariant (new_name)) |
| { |
| init_stmt = gimple_build_assign (new_var, new_name); |
| new_name = make_ssa_name (new_var, init_stmt); |
| gimple_assign_set_lhs (init_stmt, new_name); |
| new_bb = gsi_insert_on_edge_immediate (pe, init_stmt); |
| gcc_assert (!new_bb); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "created new init_stmt: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, init_stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| constant_p = false; |
| } |
| CONSTRUCTOR_APPEND_ELT (v, NULL_TREE, new_name); |
| } |
| /* Create a vector from [new_name_0, new_name_1, ..., new_name_nunits-1] */ |
| if (constant_p) |
| new_vec = build_vector_from_ctor (vectype, v); |
| else |
| new_vec = build_constructor (vectype, v); |
| vec_init = vect_init_vector (iv_phi, new_vec, vectype, NULL); |
| } |
| |
| |
| /* Create the vector that holds the step of the induction. */ |
| if (nested_in_vect_loop) |
| /* iv_loop is nested in the loop to be vectorized. Generate: |
| vec_step = [S, S, S, S] */ |
| new_name = step_expr; |
| else |
| { |
| /* iv_loop is the loop to be vectorized. Generate: |
| vec_step = [VF*S, VF*S, VF*S, VF*S] */ |
| if (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr))) |
| { |
| expr = build_int_cst (integer_type_node, vf); |
| expr = fold_convert (TREE_TYPE (step_expr), expr); |
| } |
| else |
| expr = build_int_cst (TREE_TYPE (step_expr), vf); |
| new_name = fold_build2 (MULT_EXPR, TREE_TYPE (step_expr), |
| expr, step_expr); |
| if (TREE_CODE (step_expr) == SSA_NAME) |
| new_name = vect_init_vector (iv_phi, new_name, |
| TREE_TYPE (step_expr), NULL); |
| } |
| |
| t = unshare_expr (new_name); |
| gcc_assert (CONSTANT_CLASS_P (new_name) |
| || TREE_CODE (new_name) == SSA_NAME); |
| stepvectype = get_vectype_for_scalar_type (TREE_TYPE (new_name)); |
| gcc_assert (stepvectype); |
| new_vec = build_vector_from_val (stepvectype, t); |
| vec_step = vect_init_vector (iv_phi, new_vec, stepvectype, NULL); |
| |
| |
| /* Create the following def-use cycle: |
| loop prolog: |
| vec_init = ... |
| vec_step = ... |
| loop: |
| vec_iv = PHI <vec_init, vec_loop> |
| ... |
| STMT |
| ... |
| vec_loop = vec_iv + vec_step; */ |
| |
| /* Create the induction-phi that defines the induction-operand. */ |
| vec_dest = vect_get_new_vect_var (vectype, vect_simple_var, "vec_iv_"); |
| induction_phi = create_phi_node (vec_dest, iv_loop->header); |
| set_vinfo_for_stmt (induction_phi, |
| new_stmt_vec_info (induction_phi, loop_vinfo, NULL)); |
| induc_def = PHI_RESULT (induction_phi); |
| |
| /* Create the iv update inside the loop */ |
| new_stmt = gimple_build_assign_with_ops (PLUS_EXPR, vec_dest, |
| induc_def, vec_step); |
| vec_def = make_ssa_name (vec_dest, new_stmt); |
| gimple_assign_set_lhs (new_stmt, vec_def); |
| gsi_insert_before (&si, new_stmt, GSI_SAME_STMT); |
| set_vinfo_for_stmt (new_stmt, new_stmt_vec_info (new_stmt, loop_vinfo, |
| NULL)); |
| |
| /* Set the arguments of the phi node: */ |
| add_phi_arg (induction_phi, vec_init, pe, UNKNOWN_LOCATION); |
| add_phi_arg (induction_phi, vec_def, loop_latch_edge (iv_loop), |
| UNKNOWN_LOCATION); |
| |
| |
| /* In case that vectorization factor (VF) is bigger than the number |
| of elements that we can fit in a vectype (nunits), we have to generate |
| more than one vector stmt - i.e - we need to "unroll" the |
| vector stmt by a factor VF/nunits. For more details see documentation |
| in vectorizable_operation. */ |
| |
| if (ncopies > 1) |
| { |
| stmt_vec_info prev_stmt_vinfo; |
| /* FORNOW. This restriction should be relaxed. */ |
| gcc_assert (!nested_in_vect_loop); |
| |
| /* Create the vector that holds the step of the induction. */ |
| if (SCALAR_FLOAT_TYPE_P (TREE_TYPE (step_expr))) |
| { |
| expr = build_int_cst (integer_type_node, nunits); |
| expr = fold_convert (TREE_TYPE (step_expr), expr); |
| } |
| else |
| expr = build_int_cst (TREE_TYPE (step_expr), nunits); |
| new_name = fold_build2 (MULT_EXPR, TREE_TYPE (step_expr), |
| expr, step_expr); |
| if (TREE_CODE (step_expr) == SSA_NAME) |
| new_name = vect_init_vector (iv_phi, new_name, |
| TREE_TYPE (step_expr), NULL); |
| t = unshare_expr (new_name); |
| gcc_assert (CONSTANT_CLASS_P (new_name) |
| || TREE_CODE (new_name) == SSA_NAME); |
| new_vec = build_vector_from_val (stepvectype, t); |
| vec_step = vect_init_vector (iv_phi, new_vec, stepvectype, NULL); |
| |
| vec_def = induc_def; |
| prev_stmt_vinfo = vinfo_for_stmt (induction_phi); |
| for (i = 1; i < ncopies; i++) |
| { |
| /* vec_i = vec_prev + vec_step */ |
| new_stmt = gimple_build_assign_with_ops (PLUS_EXPR, vec_dest, |
| vec_def, vec_step); |
| vec_def = make_ssa_name (vec_dest, new_stmt); |
| gimple_assign_set_lhs (new_stmt, vec_def); |
| |
| gsi_insert_before (&si, new_stmt, GSI_SAME_STMT); |
| if (!useless_type_conversion_p (resvectype, vectype)) |
| { |
| new_stmt = gimple_build_assign_with_ops |
| (VIEW_CONVERT_EXPR, |
| vect_get_new_vect_var (resvectype, vect_simple_var, |
| "vec_iv_"), |
| build1 (VIEW_CONVERT_EXPR, resvectype, |
| gimple_assign_lhs (new_stmt)), NULL_TREE); |
| gimple_assign_set_lhs (new_stmt, |
| make_ssa_name |
| (gimple_assign_lhs (new_stmt), new_stmt)); |
| gsi_insert_before (&si, new_stmt, GSI_SAME_STMT); |
| } |
| set_vinfo_for_stmt (new_stmt, |
| new_stmt_vec_info (new_stmt, loop_vinfo, NULL)); |
| STMT_VINFO_RELATED_STMT (prev_stmt_vinfo) = new_stmt; |
| prev_stmt_vinfo = vinfo_for_stmt (new_stmt); |
| } |
| } |
| |
| if (nested_in_vect_loop) |
| { |
| /* Find the loop-closed exit-phi of the induction, and record |
| the final vector of induction results: */ |
| exit_phi = NULL; |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, loop_arg) |
| { |
| gimple use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| |
| if (!flow_bb_inside_loop_p (iv_loop, gimple_bb (use_stmt))) |
| { |
| exit_phi = use_stmt; |
| break; |
| } |
| } |
| if (exit_phi) |
| { |
| stmt_vec_info stmt_vinfo = vinfo_for_stmt (exit_phi); |
| /* FORNOW. Currently not supporting the case that an inner-loop induction |
| is not used in the outer-loop (i.e. only outside the outer-loop). */ |
| gcc_assert (STMT_VINFO_RELEVANT_P (stmt_vinfo) |
| && !STMT_VINFO_LIVE_P (stmt_vinfo)); |
| |
| STMT_VINFO_VEC_STMT (stmt_vinfo) = new_stmt; |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "vector of inductions after inner-loop:"); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, new_stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| } |
| } |
| |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "transform induction: created def-use cycle: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, induction_phi, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, |
| SSA_NAME_DEF_STMT (vec_def), 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| STMT_VINFO_VEC_STMT (phi_info) = induction_phi; |
| if (!useless_type_conversion_p (resvectype, vectype)) |
| { |
| new_stmt = gimple_build_assign_with_ops |
| (VIEW_CONVERT_EXPR, |
| vect_get_new_vect_var (resvectype, vect_simple_var, "vec_iv_"), |
| build1 (VIEW_CONVERT_EXPR, resvectype, induc_def), NULL_TREE); |
| induc_def = make_ssa_name (gimple_assign_lhs (new_stmt), new_stmt); |
| gimple_assign_set_lhs (new_stmt, induc_def); |
| si = gsi_after_labels (bb); |
| gsi_insert_before (&si, new_stmt, GSI_SAME_STMT); |
| set_vinfo_for_stmt (new_stmt, |
| new_stmt_vec_info (new_stmt, loop_vinfo, NULL)); |
| STMT_VINFO_RELATED_STMT (vinfo_for_stmt (new_stmt)) |
| = STMT_VINFO_RELATED_STMT (vinfo_for_stmt (induction_phi)); |
| } |
| |
| return induc_def; |
| } |
| |
| |
| /* Function get_initial_def_for_reduction |
| |
| Input: |
| STMT - a stmt that performs a reduction operation in the loop. |
| INIT_VAL - the initial value of the reduction variable |
| |
| Output: |
| ADJUSTMENT_DEF - a tree that holds a value to be added to the final result |
| of the reduction (used for adjusting the epilog - see below). |
| Return a vector variable, initialized according to the operation that STMT |
| performs. This vector will be used as the initial value of the |
| vector of partial results. |
| |
| Option1 (adjust in epilog): Initialize the vector as follows: |
| add/bit or/xor: [0,0,...,0,0] |
| mult/bit and: [1,1,...,1,1] |
| min/max/cond_expr: [init_val,init_val,..,init_val,init_val] |
| and when necessary (e.g. add/mult case) let the caller know |
| that it needs to adjust the result by init_val. |
| |
| Option2: Initialize the vector as follows: |
| add/bit or/xor: [init_val,0,0,...,0] |
| mult/bit and: [init_val,1,1,...,1] |
| min/max/cond_expr: [init_val,init_val,...,init_val] |
| and no adjustments are needed. |
| |
| For example, for the following code: |
| |
| s = init_val; |
| for (i=0;i<n;i++) |
| s = s + a[i]; |
| |
| STMT is 's = s + a[i]', and the reduction variable is 's'. |
| For a vector of 4 units, we want to return either [0,0,0,init_val], |
| or [0,0,0,0] and let the caller know that it needs to adjust |
| the result at the end by 'init_val'. |
| |
| FORNOW, we are using the 'adjust in epilog' scheme, because this way the |
| initialization vector is simpler (same element in all entries), if |
| ADJUSTMENT_DEF is not NULL, and Option2 otherwise. |
| |
| A cost model should help decide between these two schemes. */ |
| |
| tree |
| get_initial_def_for_reduction (gimple stmt, tree init_val, |
| tree *adjustment_def) |
| { |
| stmt_vec_info stmt_vinfo = vinfo_for_stmt (stmt); |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_vinfo); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| tree scalar_type = TREE_TYPE (init_val); |
| tree vectype = get_vectype_for_scalar_type (scalar_type); |
| int nunits; |
| enum tree_code code = gimple_assign_rhs_code (stmt); |
| tree def_for_init; |
| tree init_def; |
| tree *elts; |
| int i; |
| bool nested_in_vect_loop = false; |
| tree init_value; |
| REAL_VALUE_TYPE real_init_val = dconst0; |
| int int_init_val = 0; |
| gimple def_stmt = NULL; |
| |
| gcc_assert (vectype); |
| nunits = TYPE_VECTOR_SUBPARTS (vectype); |
| |
| gcc_assert (POINTER_TYPE_P (scalar_type) || INTEGRAL_TYPE_P (scalar_type) |
| || SCALAR_FLOAT_TYPE_P (scalar_type)); |
| |
| if (nested_in_vect_loop_p (loop, stmt)) |
| nested_in_vect_loop = true; |
| else |
| gcc_assert (loop == (gimple_bb (stmt))->loop_father); |
| |
| /* In case of double reduction we only create a vector variable to be put |
| in the reduction phi node. The actual statement creation is done in |
| vect_create_epilog_for_reduction. */ |
| if (adjustment_def && nested_in_vect_loop |
| && TREE_CODE (init_val) == SSA_NAME |
| && (def_stmt = SSA_NAME_DEF_STMT (init_val)) |
| && gimple_code (def_stmt) == GIMPLE_PHI |
| && flow_bb_inside_loop_p (loop, gimple_bb (def_stmt)) |
| && vinfo_for_stmt (def_stmt) |
| && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt)) |
| == vect_double_reduction_def) |
| { |
| *adjustment_def = NULL; |
| return vect_create_destination_var (init_val, vectype); |
| } |
| |
| if (TREE_CONSTANT (init_val)) |
| { |
| if (SCALAR_FLOAT_TYPE_P (scalar_type)) |
| init_value = build_real (scalar_type, TREE_REAL_CST (init_val)); |
| else |
| init_value = build_int_cst (scalar_type, TREE_INT_CST_LOW (init_val)); |
| } |
| else |
| init_value = init_val; |
| |
| switch (code) |
| { |
| case WIDEN_SUM_EXPR: |
| case DOT_PROD_EXPR: |
| case SAD_EXPR: |
| case PLUS_EXPR: |
| case MINUS_EXPR: |
| case BIT_IOR_EXPR: |
| case BIT_XOR_EXPR: |
| case MULT_EXPR: |
| case BIT_AND_EXPR: |
| /* ADJUSMENT_DEF is NULL when called from |
| vect_create_epilog_for_reduction to vectorize double reduction. */ |
| if (adjustment_def) |
| { |
| if (nested_in_vect_loop) |
| *adjustment_def = vect_get_vec_def_for_operand (init_val, stmt, |
| NULL); |
| else |
| *adjustment_def = init_val; |
| } |
| |
| if (code == MULT_EXPR) |
| { |
| real_init_val = dconst1; |
| int_init_val = 1; |
| } |
| |
| if (code == BIT_AND_EXPR) |
| int_init_val = -1; |
| |
| if (SCALAR_FLOAT_TYPE_P (scalar_type)) |
| def_for_init = build_real (scalar_type, real_init_val); |
| else |
| def_for_init = build_int_cst (scalar_type, int_init_val); |
| |
| /* Create a vector of '0' or '1' except the first element. */ |
| elts = XALLOCAVEC (tree, nunits); |
| for (i = nunits - 2; i >= 0; --i) |
| elts[i + 1] = def_for_init; |
| |
| /* Option1: the first element is '0' or '1' as well. */ |
| if (adjustment_def) |
| { |
| elts[0] = def_for_init; |
| init_def = build_vector (vectype, elts); |
| break; |
| } |
| |
| /* Option2: the first element is INIT_VAL. */ |
| elts[0] = init_val; |
| if (TREE_CONSTANT (init_val)) |
| init_def = build_vector (vectype, elts); |
| else |
| { |
| vec<constructor_elt, va_gc> *v; |
| vec_alloc (v, nunits); |
| CONSTRUCTOR_APPEND_ELT (v, NULL_TREE, init_val); |
| for (i = 1; i < nunits; ++i) |
| CONSTRUCTOR_APPEND_ELT (v, NULL_TREE, elts[i]); |
| init_def = build_constructor (vectype, v); |
| } |
| |
| break; |
| |
| case MIN_EXPR: |
| case MAX_EXPR: |
| case COND_EXPR: |
| if (adjustment_def) |
| { |
| *adjustment_def = NULL_TREE; |
| init_def = vect_get_vec_def_for_operand (init_val, stmt, NULL); |
| break; |
| } |
| |
| init_def = build_vector_from_val (vectype, init_value); |
| break; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| return init_def; |
| } |
| |
| |
| /* Function vect_create_epilog_for_reduction |
| |
| Create code at the loop-epilog to finalize the result of a reduction |
| computation. |
| |
| VECT_DEFS is list of vector of partial results, i.e., the lhs's of vector |
| reduction statements. |
| STMT is the scalar reduction stmt that is being vectorized. |
| NCOPIES is > 1 in case the vectorization factor (VF) is bigger than the |
| number of elements that we can fit in a vectype (nunits). In this case |
| we have to generate more than one vector stmt - i.e - we need to "unroll" |
| the vector stmt by a factor VF/nunits. For more details see documentation |
| in vectorizable_operation. |
| REDUC_CODE is the tree-code for the epilog reduction. |
| REDUCTION_PHIS is a list of the phi-nodes that carry the reduction |
| computation. |
| REDUC_INDEX is the index of the operand in the right hand side of the |
| statement that is defined by REDUCTION_PHI. |
| DOUBLE_REDUC is TRUE if double reduction phi nodes should be handled. |
| SLP_NODE is an SLP node containing a group of reduction statements. The |
| first one in this group is STMT. |
| |
| This function: |
| 1. Creates the reduction def-use cycles: sets the arguments for |
| REDUCTION_PHIS: |
| The loop-entry argument is the vectorized initial-value of the reduction. |
| The loop-latch argument is taken from VECT_DEFS - the vector of partial |
| sums. |
| 2. "Reduces" each vector of partial results VECT_DEFS into a single result, |
| by applying the operation specified by REDUC_CODE if available, or by |
| other means (whole-vector shifts or a scalar loop). |
| The function also creates a new phi node at the loop exit to preserve |
| loop-closed form, as illustrated below. |
| |
| The flow at the entry to this function: |
| |
| loop: |
| vec_def = phi <null, null> # REDUCTION_PHI |
| VECT_DEF = vector_stmt # vectorized form of STMT |
| s_loop = scalar_stmt # (scalar) STMT |
| loop_exit: |
| s_out0 = phi <s_loop> # (scalar) EXIT_PHI |
| use <s_out0> |
| use <s_out0> |
| |
| The above is transformed by this function into: |
| |
| loop: |
| vec_def = phi <vec_init, VECT_DEF> # REDUCTION_PHI |
| VECT_DEF = vector_stmt # vectorized form of STMT |
| s_loop = scalar_stmt # (scalar) STMT |
| loop_exit: |
| s_out0 = phi <s_loop> # (scalar) EXIT_PHI |
| v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI |
| v_out2 = reduce <v_out1> |
| s_out3 = extract_field <v_out2, 0> |
| s_out4 = adjust_result <s_out3> |
| use <s_out4> |
| use <s_out4> |
| */ |
| |
| static void |
| vect_create_epilog_for_reduction (vec<tree> vect_defs, gimple stmt, |
| int ncopies, enum tree_code reduc_code, |
| vec<gimple> reduction_phis, |
| int reduc_index, bool double_reduc, |
| slp_tree slp_node) |
| { |
| stmt_vec_info stmt_info = vinfo_for_stmt (stmt); |
| stmt_vec_info prev_phi_info; |
| tree vectype; |
| enum machine_mode mode; |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo), *outer_loop = NULL; |
| basic_block exit_bb; |
| tree scalar_dest; |
| tree scalar_type; |
| gimple new_phi = NULL, phi; |
| gimple_stmt_iterator exit_gsi; |
| tree vec_dest; |
| tree new_temp = NULL_TREE, new_dest, new_name, new_scalar_dest; |
| gimple epilog_stmt = NULL; |
| enum tree_code code = gimple_assign_rhs_code (stmt); |
| gimple exit_phi; |
| tree bitsize, bitpos; |
| tree adjustment_def = NULL; |
| tree vec_initial_def = NULL; |
| tree reduction_op, expr, def; |
| tree orig_name, scalar_result; |
| imm_use_iterator imm_iter, phi_imm_iter; |
| use_operand_p use_p, phi_use_p; |
| bool extract_scalar_result = false; |
| gimple use_stmt, orig_stmt, reduction_phi = NULL; |
| bool nested_in_vect_loop = false; |
| auto_vec<gimple> new_phis; |
| auto_vec<gimple> inner_phis; |
| enum vect_def_type dt = vect_unknown_def_type; |
| int j, i; |
| auto_vec<tree> scalar_results; |
| unsigned int group_size = 1, k, ratio; |
| auto_vec<tree> vec_initial_defs; |
| auto_vec<gimple> phis; |
| bool slp_reduc = false; |
| tree new_phi_result; |
| gimple inner_phi = NULL; |
| |
| if (slp_node) |
| group_size = SLP_TREE_SCALAR_STMTS (slp_node).length (); |
| |
| if (nested_in_vect_loop_p (loop, stmt)) |
| { |
| outer_loop = loop; |
| loop = loop->inner; |
| nested_in_vect_loop = true; |
| gcc_assert (!slp_node); |
| } |
| |
| switch (get_gimple_rhs_class (gimple_assign_rhs_code (stmt))) |
| { |
| case GIMPLE_SINGLE_RHS: |
| gcc_assert (TREE_OPERAND_LENGTH (gimple_assign_rhs1 (stmt)) |
| == ternary_op); |
| reduction_op = TREE_OPERAND (gimple_assign_rhs1 (stmt), reduc_index); |
| break; |
| case GIMPLE_UNARY_RHS: |
| reduction_op = gimple_assign_rhs1 (stmt); |
| break; |
| case GIMPLE_BINARY_RHS: |
| reduction_op = reduc_index ? |
| gimple_assign_rhs2 (stmt) : gimple_assign_rhs1 (stmt); |
| break; |
| case GIMPLE_TERNARY_RHS: |
| reduction_op = gimple_op (stmt, reduc_index + 1); |
| break; |
| default: |
| gcc_unreachable (); |
| } |
| |
| vectype = get_vectype_for_scalar_type (TREE_TYPE (reduction_op)); |
| gcc_assert (vectype); |
| mode = TYPE_MODE (vectype); |
| |
| /* 1. Create the reduction def-use cycle: |
| Set the arguments of REDUCTION_PHIS, i.e., transform |
| |
| loop: |
| vec_def = phi <null, null> # REDUCTION_PHI |
| VECT_DEF = vector_stmt # vectorized form of STMT |
| ... |
| |
| into: |
| |
| loop: |
| vec_def = phi <vec_init, VECT_DEF> # REDUCTION_PHI |
| VECT_DEF = vector_stmt # vectorized form of STMT |
| ... |
| |
| (in case of SLP, do it for all the phis). */ |
| |
| /* Get the loop-entry arguments. */ |
| if (slp_node) |
| vect_get_vec_defs (reduction_op, NULL_TREE, stmt, &vec_initial_defs, |
| NULL, slp_node, reduc_index); |
| else |
| { |
| vec_initial_defs.create (1); |
| /* For the case of reduction, vect_get_vec_def_for_operand returns |
| the scalar def before the loop, that defines the initial value |
| of the reduction variable. */ |
| vec_initial_def = vect_get_vec_def_for_operand (reduction_op, stmt, |
| &adjustment_def); |
| vec_initial_defs.quick_push (vec_initial_def); |
| } |
| |
| /* Set phi nodes arguments. */ |
| FOR_EACH_VEC_ELT (reduction_phis, i, phi) |
| { |
| tree vec_init_def, def; |
| gimple_seq stmts; |
| vec_init_def = force_gimple_operand (vec_initial_defs[i], &stmts, |
| true, NULL_TREE); |
| gsi_insert_seq_on_edge_immediate (loop_preheader_edge (loop), stmts); |
| def = vect_defs[i]; |
| for (j = 0; j < ncopies; j++) |
| { |
| /* Set the loop-entry arg of the reduction-phi. */ |
| add_phi_arg (phi, vec_init_def, loop_preheader_edge (loop), |
| UNKNOWN_LOCATION); |
| |
| /* Set the loop-latch arg for the reduction-phi. */ |
| if (j > 0) |
| def = vect_get_vec_def_for_stmt_copy (vect_unknown_def_type, def); |
| |
| add_phi_arg (phi, def, loop_latch_edge (loop), UNKNOWN_LOCATION); |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "transform reduction: created def-use cycle: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, phi, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, SSA_NAME_DEF_STMT (def), 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| phi = STMT_VINFO_RELATED_STMT (vinfo_for_stmt (phi)); |
| } |
| } |
| |
| /* 2. Create epilog code. |
| The reduction epilog code operates across the elements of the vector |
| of partial results computed by the vectorized loop. |
| The reduction epilog code consists of: |
| |
| step 1: compute the scalar result in a vector (v_out2) |
| step 2: extract the scalar result (s_out3) from the vector (v_out2) |
| step 3: adjust the scalar result (s_out3) if needed. |
| |
| Step 1 can be accomplished using one the following three schemes: |
| (scheme 1) using reduc_code, if available. |
| (scheme 2) using whole-vector shifts, if available. |
| (scheme 3) using a scalar loop. In this case steps 1+2 above are |
| combined. |
| |
| The overall epilog code looks like this: |
| |
| s_out0 = phi <s_loop> # original EXIT_PHI |
| v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI |
| v_out2 = reduce <v_out1> # step 1 |
| s_out3 = extract_field <v_out2, 0> # step 2 |
| s_out4 = adjust_result <s_out3> # step 3 |
| |
| (step 3 is optional, and steps 1 and 2 may be combined). |
| Lastly, the uses of s_out0 are replaced by s_out4. */ |
| |
| |
| /* 2.1 Create new loop-exit-phis to preserve loop-closed form: |
| v_out1 = phi <VECT_DEF> |
| Store them in NEW_PHIS. */ |
| |
| exit_bb = single_exit (loop)->dest; |
| prev_phi_info = NULL; |
| new_phis.create (vect_defs.length ()); |
| FOR_EACH_VEC_ELT (vect_defs, i, def) |
| { |
| for (j = 0; j < ncopies; j++) |
| { |
| tree new_def = copy_ssa_name (def, NULL); |
| phi = create_phi_node (new_def, exit_bb); |
| set_vinfo_for_stmt (phi, new_stmt_vec_info (phi, loop_vinfo, NULL)); |
| if (j == 0) |
| new_phis.quick_push (phi); |
| else |
| { |
| def = vect_get_vec_def_for_stmt_copy (dt, def); |
| STMT_VINFO_RELATED_STMT (prev_phi_info) = phi; |
| } |
| |
| SET_PHI_ARG_DEF (phi, single_exit (loop)->dest_idx, def); |
| prev_phi_info = vinfo_for_stmt (phi); |
| } |
| } |
| |
| /* The epilogue is created for the outer-loop, i.e., for the loop being |
| vectorized. Create exit phis for the outer loop. */ |
| if (double_reduc) |
| { |
| loop = outer_loop; |
| exit_bb = single_exit (loop)->dest; |
| inner_phis.create (vect_defs.length ()); |
| FOR_EACH_VEC_ELT (new_phis, i, phi) |
| { |
| tree new_result = copy_ssa_name (PHI_RESULT (phi), NULL); |
| gimple outer_phi = create_phi_node (new_result, exit_bb); |
| SET_PHI_ARG_DEF (outer_phi, single_exit (loop)->dest_idx, |
| PHI_RESULT (phi)); |
| set_vinfo_for_stmt (outer_phi, new_stmt_vec_info (outer_phi, |
| loop_vinfo, NULL)); |
| inner_phis.quick_push (phi); |
| new_phis[i] = outer_phi; |
| prev_phi_info = vinfo_for_stmt (outer_phi); |
| while (STMT_VINFO_RELATED_STMT (vinfo_for_stmt (phi))) |
| { |
| phi = STMT_VINFO_RELATED_STMT (vinfo_for_stmt (phi)); |
| new_result = copy_ssa_name (PHI_RESULT (phi), NULL); |
| outer_phi = create_phi_node (new_result, exit_bb); |
| SET_PHI_ARG_DEF (outer_phi, single_exit (loop)->dest_idx, |
| PHI_RESULT (phi)); |
| set_vinfo_for_stmt (outer_phi, new_stmt_vec_info (outer_phi, |
| loop_vinfo, NULL)); |
| STMT_VINFO_RELATED_STMT (prev_phi_info) = outer_phi; |
| prev_phi_info = vinfo_for_stmt (outer_phi); |
| } |
| } |
| } |
| |
| exit_gsi = gsi_after_labels (exit_bb); |
| |
| /* 2.2 Get the relevant tree-code to use in the epilog for schemes 2,3 |
| (i.e. when reduc_code is not available) and in the final adjustment |
| code (if needed). Also get the original scalar reduction variable as |
| defined in the loop. In case STMT is a "pattern-stmt" (i.e. - it |
| represents a reduction pattern), the tree-code and scalar-def are |
| taken from the original stmt that the pattern-stmt (STMT) replaces. |
| Otherwise (it is a regular reduction) - the tree-code and scalar-def |
| are taken from STMT. */ |
| |
| orig_stmt = STMT_VINFO_RELATED_STMT (stmt_info); |
| if (!orig_stmt) |
| { |
| /* Regular reduction */ |
| orig_stmt = stmt; |
| } |
| else |
| { |
| /* Reduction pattern */ |
| stmt_vec_info stmt_vinfo = vinfo_for_stmt (orig_stmt); |
| gcc_assert (STMT_VINFO_IN_PATTERN_P (stmt_vinfo)); |
| gcc_assert (STMT_VINFO_RELATED_STMT (stmt_vinfo) == stmt); |
| } |
| |
| code = gimple_assign_rhs_code (orig_stmt); |
| /* For MINUS_EXPR the initial vector is [init_val,0,...,0], therefore, |
| partial results are added and not subtracted. */ |
| if (code == MINUS_EXPR) |
| code = PLUS_EXPR; |
| |
| scalar_dest = gimple_assign_lhs (orig_stmt); |
| scalar_type = TREE_TYPE (scalar_dest); |
| scalar_results.create (group_size); |
| new_scalar_dest = vect_create_destination_var (scalar_dest, NULL); |
| bitsize = TYPE_SIZE (scalar_type); |
| |
| /* In case this is a reduction in an inner-loop while vectorizing an outer |
| loop - we don't need to extract a single scalar result at the end of the |
| inner-loop (unless it is double reduction, i.e., the use of reduction is |
| outside the outer-loop). The final vector of partial results will be used |
| in the vectorized outer-loop, or reduced to a scalar result at the end of |
| the outer-loop. */ |
| if (nested_in_vect_loop && !double_reduc) |
| goto vect_finalize_reduction; |
| |
| /* SLP reduction without reduction chain, e.g., |
| # a1 = phi <a2, a0> |
| # b1 = phi <b2, b0> |
| a2 = operation (a1) |
| b2 = operation (b1) */ |
| slp_reduc = (slp_node && !GROUP_FIRST_ELEMENT (vinfo_for_stmt (stmt))); |
| |
| /* In case of reduction chain, e.g., |
| # a1 = phi <a3, a0> |
| a2 = operation (a1) |
| a3 = operation (a2), |
| |
| we may end up with more than one vector result. Here we reduce them to |
| one vector. */ |
| if (GROUP_FIRST_ELEMENT (vinfo_for_stmt (stmt))) |
| { |
| tree first_vect = PHI_RESULT (new_phis[0]); |
| tree tmp; |
| gimple new_vec_stmt = NULL; |
| |
| vec_dest = vect_create_destination_var (scalar_dest, vectype); |
| for (k = 1; k < new_phis.length (); k++) |
| { |
| gimple next_phi = new_phis[k]; |
| tree second_vect = PHI_RESULT (next_phi); |
| |
| tmp = build2 (code, vectype, first_vect, second_vect); |
| new_vec_stmt = gimple_build_assign (vec_dest, tmp); |
| first_vect = make_ssa_name (vec_dest, new_vec_stmt); |
| gimple_assign_set_lhs (new_vec_stmt, first_vect); |
| gsi_insert_before (&exit_gsi, new_vec_stmt, GSI_SAME_STMT); |
| } |
| |
| new_phi_result = first_vect; |
| if (new_vec_stmt) |
| { |
| new_phis.truncate (0); |
| new_phis.safe_push (new_vec_stmt); |
| } |
| } |
| else |
| new_phi_result = PHI_RESULT (new_phis[0]); |
| |
| /* 2.3 Create the reduction code, using one of the three schemes described |
| above. In SLP we simply need to extract all the elements from the |
| vector (without reducing them), so we use scalar shifts. */ |
| if (reduc_code != ERROR_MARK && !slp_reduc) |
| { |
| tree tmp; |
| |
| /*** Case 1: Create: |
| v_out2 = reduc_expr <v_out1> */ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Reduce using direct vector reduction.\n"); |
| |
| vec_dest = vect_create_destination_var (scalar_dest, vectype); |
| tmp = build1 (reduc_code, vectype, new_phi_result); |
| epilog_stmt = gimple_build_assign (vec_dest, tmp); |
| new_temp = make_ssa_name (vec_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| extract_scalar_result = true; |
| } |
| else |
| { |
| enum tree_code shift_code = ERROR_MARK; |
| bool have_whole_vector_shift = true; |
| int bit_offset; |
| int element_bitsize = tree_to_uhwi (bitsize); |
| int vec_size_in_bits = tree_to_uhwi (TYPE_SIZE (vectype)); |
| tree vec_temp; |
| |
| if (optab_handler (vec_shr_optab, mode) != CODE_FOR_nothing) |
| shift_code = VEC_RSHIFT_EXPR; |
| else |
| have_whole_vector_shift = false; |
| |
| /* Regardless of whether we have a whole vector shift, if we're |
| emulating the operation via tree-vect-generic, we don't want |
| to use it. Only the first round of the reduction is likely |
| to still be profitable via emulation. */ |
| /* ??? It might be better to emit a reduction tree code here, so that |
| tree-vect-generic can expand the first round via bit tricks. */ |
| if (!VECTOR_MODE_P (mode)) |
| have_whole_vector_shift = false; |
| else |
| { |
| optab optab = optab_for_tree_code (code, vectype, optab_default); |
| if (optab_handler (optab, mode) == CODE_FOR_nothing) |
| have_whole_vector_shift = false; |
| } |
| |
| if (have_whole_vector_shift && !slp_reduc) |
| { |
| /*** Case 2: Create: |
| for (offset = VS/2; offset >= element_size; offset/=2) |
| { |
| Create: va' = vec_shift <va, offset> |
| Create: va = vop <va, va'> |
| } */ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Reduce using vector shifts\n"); |
| |
| vec_dest = vect_create_destination_var (scalar_dest, vectype); |
| new_temp = new_phi_result; |
| for (bit_offset = vec_size_in_bits/2; |
| bit_offset >= element_bitsize; |
| bit_offset /= 2) |
| { |
| tree bitpos = size_int (bit_offset); |
| |
| epilog_stmt = gimple_build_assign_with_ops (shift_code, |
| vec_dest, new_temp, bitpos); |
| new_name = make_ssa_name (vec_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_name); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| epilog_stmt = gimple_build_assign_with_ops (code, vec_dest, |
| new_name, new_temp); |
| new_temp = make_ssa_name (vec_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| } |
| |
| extract_scalar_result = true; |
| } |
| else |
| { |
| tree rhs; |
| |
| /*** Case 3: Create: |
| s = extract_field <v_out2, 0> |
| for (offset = element_size; |
| offset < vector_size; |
| offset += element_size;) |
| { |
| Create: s' = extract_field <v_out2, offset> |
| Create: s = op <s, s'> // For non SLP cases |
| } */ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Reduce using scalar code.\n"); |
| |
| vec_size_in_bits = tree_to_uhwi (TYPE_SIZE (vectype)); |
| FOR_EACH_VEC_ELT (new_phis, i, new_phi) |
| { |
| if (gimple_code (new_phi) == GIMPLE_PHI) |
| vec_temp = PHI_RESULT (new_phi); |
| else |
| vec_temp = gimple_assign_lhs (new_phi); |
| rhs = build3 (BIT_FIELD_REF, scalar_type, vec_temp, bitsize, |
| bitsize_zero_node); |
| epilog_stmt = gimple_build_assign (new_scalar_dest, rhs); |
| new_temp = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| /* In SLP we don't need to apply reduction operation, so we just |
| collect s' values in SCALAR_RESULTS. */ |
| if (slp_reduc) |
| scalar_results.safe_push (new_temp); |
| |
| for (bit_offset = element_bitsize; |
| bit_offset < vec_size_in_bits; |
| bit_offset += element_bitsize) |
| { |
| tree bitpos = bitsize_int (bit_offset); |
| tree rhs = build3 (BIT_FIELD_REF, scalar_type, vec_temp, |
| bitsize, bitpos); |
| |
| epilog_stmt = gimple_build_assign (new_scalar_dest, rhs); |
| new_name = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_name); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| |
| if (slp_reduc) |
| { |
| /* In SLP we don't need to apply reduction operation, so |
| we just collect s' values in SCALAR_RESULTS. */ |
| new_temp = new_name; |
| scalar_results.safe_push (new_name); |
| } |
| else |
| { |
| epilog_stmt = gimple_build_assign_with_ops (code, |
| new_scalar_dest, new_name, new_temp); |
| new_temp = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| } |
| } |
| } |
| |
| /* The only case where we need to reduce scalar results in SLP, is |
| unrolling. If the size of SCALAR_RESULTS is greater than |
| GROUP_SIZE, we reduce them combining elements modulo |
| GROUP_SIZE. */ |
| if (slp_reduc) |
| { |
| tree res, first_res, new_res; |
| gimple new_stmt; |
| |
| /* Reduce multiple scalar results in case of SLP unrolling. */ |
| for (j = group_size; scalar_results.iterate (j, &res); |
| j++) |
| { |
| first_res = scalar_results[j % group_size]; |
| new_stmt = gimple_build_assign_with_ops (code, |
| new_scalar_dest, first_res, res); |
| new_res = make_ssa_name (new_scalar_dest, new_stmt); |
| gimple_assign_set_lhs (new_stmt, new_res); |
| gsi_insert_before (&exit_gsi, new_stmt, GSI_SAME_STMT); |
| scalar_results[j % group_size] = new_res; |
| } |
| } |
| else |
| /* Not SLP - we have one scalar to keep in SCALAR_RESULTS. */ |
| scalar_results.safe_push (new_temp); |
| |
| extract_scalar_result = false; |
| } |
| } |
| |
| /* 2.4 Extract the final scalar result. Create: |
| s_out3 = extract_field <v_out2, bitpos> */ |
| |
| if (extract_scalar_result) |
| { |
| tree rhs; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "extract scalar result\n"); |
| |
| if (BYTES_BIG_ENDIAN) |
| bitpos = size_binop (MULT_EXPR, |
| bitsize_int (TYPE_VECTOR_SUBPARTS (vectype) - 1), |
| TYPE_SIZE (scalar_type)); |
| else |
| bitpos = bitsize_zero_node; |
| |
| rhs = build3 (BIT_FIELD_REF, scalar_type, new_temp, bitsize, bitpos); |
| epilog_stmt = gimple_build_assign (new_scalar_dest, rhs); |
| new_temp = make_ssa_name (new_scalar_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| scalar_results.safe_push (new_temp); |
| } |
| |
| vect_finalize_reduction: |
| |
| if (double_reduc) |
| loop = loop->inner; |
| |
| /* 2.5 Adjust the final result by the initial value of the reduction |
| variable. (When such adjustment is not needed, then |
| 'adjustment_def' is zero). For example, if code is PLUS we create: |
| new_temp = loop_exit_def + adjustment_def */ |
| |
| if (adjustment_def) |
| { |
| gcc_assert (!slp_reduc); |
| if (nested_in_vect_loop) |
| { |
| new_phi = new_phis[0]; |
| gcc_assert (TREE_CODE (TREE_TYPE (adjustment_def)) == VECTOR_TYPE); |
| expr = build2 (code, vectype, PHI_RESULT (new_phi), adjustment_def); |
| new_dest = vect_create_destination_var (scalar_dest, vectype); |
| } |
| else |
| { |
| new_temp = scalar_results[0]; |
| gcc_assert (TREE_CODE (TREE_TYPE (adjustment_def)) != VECTOR_TYPE); |
| expr = build2 (code, scalar_type, new_temp, adjustment_def); |
| new_dest = vect_create_destination_var (scalar_dest, scalar_type); |
| } |
| |
| epilog_stmt = gimple_build_assign (new_dest, expr); |
| new_temp = make_ssa_name (new_dest, epilog_stmt); |
| gimple_assign_set_lhs (epilog_stmt, new_temp); |
| gsi_insert_before (&exit_gsi, epilog_stmt, GSI_SAME_STMT); |
| if (nested_in_vect_loop) |
| { |
| set_vinfo_for_stmt (epilog_stmt, |
| new_stmt_vec_info (epilog_stmt, loop_vinfo, |
| NULL)); |
| STMT_VINFO_RELATED_STMT (vinfo_for_stmt (epilog_stmt)) = |
| STMT_VINFO_RELATED_STMT (vinfo_for_stmt (new_phi)); |
| |
| if (!double_reduc) |
| scalar_results.quick_push (new_temp); |
| else |
| scalar_results[0] = new_temp; |
| } |
| else |
| scalar_results[0] = new_temp; |
| |
| new_phis[0] = epilog_stmt; |
| } |
| |
| /* 2.6 Handle the loop-exit phis. Replace the uses of scalar loop-exit |
| phis with new adjusted scalar results, i.e., replace use <s_out0> |
| with use <s_out4>. |
| |
| Transform: |
| loop_exit: |
| s_out0 = phi <s_loop> # (scalar) EXIT_PHI |
| v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI |
| v_out2 = reduce <v_out1> |
| s_out3 = extract_field <v_out2, 0> |
| s_out4 = adjust_result <s_out3> |
| use <s_out0> |
| use <s_out0> |
| |
| into: |
| |
| loop_exit: |
| s_out0 = phi <s_loop> # (scalar) EXIT_PHI |
| v_out1 = phi <VECT_DEF> # NEW_EXIT_PHI |
| v_out2 = reduce <v_out1> |
| s_out3 = extract_field <v_out2, 0> |
| s_out4 = adjust_result <s_out3> |
| use <s_out4> |
| use <s_out4> */ |
| |
| |
| /* In SLP reduction chain we reduce vector results into one vector if |
| necessary, hence we set here GROUP_SIZE to 1. SCALAR_DEST is the LHS of |
| the last stmt in the reduction chain, since we are looking for the loop |
| exit phi node. */ |
| if (GROUP_FIRST_ELEMENT (vinfo_for_stmt (stmt))) |
| { |
| scalar_dest = gimple_assign_lhs ( |
| SLP_TREE_SCALAR_STMTS (slp_node)[group_size - 1]); |
| group_size = 1; |
| } |
| |
| /* In SLP we may have several statements in NEW_PHIS and REDUCTION_PHIS (in |
| case that GROUP_SIZE is greater than vectorization factor). Therefore, we |
| need to match SCALAR_RESULTS with corresponding statements. The first |
| (GROUP_SIZE / number of new vector stmts) scalar results correspond to |
| the first vector stmt, etc. |
| (RATIO is equal to (GROUP_SIZE / number of new vector stmts)). */ |
| if (group_size > new_phis.length ()) |
| { |
| ratio = group_size / new_phis.length (); |
| gcc_assert (!(group_size % new_phis.length ())); |
| } |
| else |
| ratio = 1; |
| |
| for (k = 0; k < group_size; k++) |
| { |
| if (k % ratio == 0) |
| { |
| epilog_stmt = new_phis[k / ratio]; |
| reduction_phi = reduction_phis[k / ratio]; |
| if (double_reduc) |
| inner_phi = inner_phis[k / ratio]; |
| } |
| |
| if (slp_reduc) |
| { |
| gimple current_stmt = SLP_TREE_SCALAR_STMTS (slp_node)[k]; |
| |
| orig_stmt = STMT_VINFO_RELATED_STMT (vinfo_for_stmt (current_stmt)); |
| /* SLP statements can't participate in patterns. */ |
| gcc_assert (!orig_stmt); |
| scalar_dest = gimple_assign_lhs (current_stmt); |
| } |
| |
| phis.create (3); |
| /* Find the loop-closed-use at the loop exit of the original scalar |
| result. (The reduction result is expected to have two immediate uses - |
| one at the latch block, and one at the loop exit). */ |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, scalar_dest) |
| if (!flow_bb_inside_loop_p (loop, gimple_bb (USE_STMT (use_p))) |
| && !is_gimple_debug (USE_STMT (use_p))) |
| phis.safe_push (USE_STMT (use_p)); |
| |
| /* While we expect to have found an exit_phi because of loop-closed-ssa |
| form we can end up without one if the scalar cycle is dead. */ |
| |
| FOR_EACH_VEC_ELT (phis, i, exit_phi) |
| { |
| if (outer_loop) |
| { |
| stmt_vec_info exit_phi_vinfo = vinfo_for_stmt (exit_phi); |
| gimple vect_phi; |
| |
| /* FORNOW. Currently not supporting the case that an inner-loop |
| reduction is not used in the outer-loop (but only outside the |
| outer-loop), unless it is double reduction. */ |
| gcc_assert ((STMT_VINFO_RELEVANT_P (exit_phi_vinfo) |
| && !STMT_VINFO_LIVE_P (exit_phi_vinfo)) |
| || double_reduc); |
| |
| STMT_VINFO_VEC_STMT (exit_phi_vinfo) = epilog_stmt; |
| if (!double_reduc |
| || STMT_VINFO_DEF_TYPE (exit_phi_vinfo) |
| != vect_double_reduction_def) |
| continue; |
| |
| /* Handle double reduction: |
| |
| stmt1: s1 = phi <s0, s2> - double reduction phi (outer loop) |
| stmt2: s3 = phi <s1, s4> - (regular) reduc phi (inner loop) |
| stmt3: s4 = use (s3) - (regular) reduc stmt (inner loop) |
| stmt4: s2 = phi <s4> - double reduction stmt (outer loop) |
| |
| At that point the regular reduction (stmt2 and stmt3) is |
| already vectorized, as well as the exit phi node, stmt4. |
| Here we vectorize the phi node of double reduction, stmt1, and |
| update all relevant statements. */ |
| |
| /* Go through all the uses of s2 to find double reduction phi |
| node, i.e., stmt1 above. */ |
| orig_name = PHI_RESULT (exit_phi); |
| FOR_EACH_IMM_USE_STMT (use_stmt, imm_iter, orig_name) |
| { |
| stmt_vec_info use_stmt_vinfo; |
| stmt_vec_info new_phi_vinfo; |
| tree vect_phi_init, preheader_arg, vect_phi_res, init_def; |
| basic_block bb = gimple_bb (use_stmt); |
| gimple use; |
| |
| /* Check that USE_STMT is really double reduction phi |
| node. */ |
| if (gimple_code (use_stmt) != GIMPLE_PHI |
| || gimple_phi_num_args (use_stmt) != 2 |
| || bb->loop_father != outer_loop) |
| continue; |
| use_stmt_vinfo = vinfo_for_stmt (use_stmt); |
| if (!use_stmt_vinfo |
| || STMT_VINFO_DEF_TYPE (use_stmt_vinfo) |
| != vect_double_reduction_def) |
| continue; |
| |
| /* Create vector phi node for double reduction: |
| vs1 = phi <vs0, vs2> |
| vs1 was created previously in this function by a call to |
| vect_get_vec_def_for_operand and is stored in |
| vec_initial_def; |
| vs2 is defined by INNER_PHI, the vectorized EXIT_PHI; |
| vs0 is created here. */ |
| |
| /* Create vector phi node. */ |
| vect_phi = create_phi_node (vec_initial_def, bb); |
| new_phi_vinfo = new_stmt_vec_info (vect_phi, |
| loop_vec_info_for_loop (outer_loop), NULL); |
| set_vinfo_for_stmt (vect_phi, new_phi_vinfo); |
| |
| /* Create vs0 - initial def of the double reduction phi. */ |
| preheader_arg = PHI_ARG_DEF_FROM_EDGE (use_stmt, |
| loop_preheader_edge (outer_loop)); |
| init_def = get_initial_def_for_reduction (stmt, |
| preheader_arg, NULL); |
| vect_phi_init = vect_init_vector (use_stmt, init_def, |
| vectype, NULL); |
| |
| /* Update phi node arguments with vs0 and vs2. */ |
| add_phi_arg (vect_phi, vect_phi_init, |
| loop_preheader_edge (outer_loop), |
| UNKNOWN_LOCATION); |
| add_phi_arg (vect_phi, PHI_RESULT (inner_phi), |
| loop_latch_edge (outer_loop), UNKNOWN_LOCATION); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "created double reduction phi node: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, vect_phi, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| vect_phi_res = PHI_RESULT (vect_phi); |
| |
| /* Replace the use, i.e., set the correct vs1 in the regular |
| reduction phi node. FORNOW, NCOPIES is always 1, so the |
| loop is redundant. */ |
| use = reduction_phi; |
| for (j = 0; j < ncopies; j++) |
| { |
| edge pr_edge = loop_preheader_edge (loop); |
| SET_PHI_ARG_DEF (use, pr_edge->dest_idx, vect_phi_res); |
| use = STMT_VINFO_RELATED_STMT (vinfo_for_stmt (use)); |
| } |
| } |
| } |
| } |
| |
| phis.release (); |
| if (nested_in_vect_loop) |
| { |
| if (double_reduc) |
| loop = outer_loop; |
| else |
| continue; |
| } |
| |
| phis.create (3); |
| /* Find the loop-closed-use at the loop exit of the original scalar |
| result. (The reduction result is expected to have two immediate uses, |
| one at the latch block, and one at the loop exit). For double |
| reductions we are looking for exit phis of the outer loop. */ |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, scalar_dest) |
| { |
| if (!flow_bb_inside_loop_p (loop, gimple_bb (USE_STMT (use_p)))) |
| { |
| if (!is_gimple_debug (USE_STMT (use_p))) |
| phis.safe_push (USE_STMT (use_p)); |
| } |
| else |
| { |
| if (double_reduc && gimple_code (USE_STMT (use_p)) == GIMPLE_PHI) |
| { |
| tree phi_res = PHI_RESULT (USE_STMT (use_p)); |
| |
| FOR_EACH_IMM_USE_FAST (phi_use_p, phi_imm_iter, phi_res) |
| { |
| if (!flow_bb_inside_loop_p (loop, |
| gimple_bb (USE_STMT (phi_use_p))) |
| && !is_gimple_debug (USE_STMT (phi_use_p))) |
| phis.safe_push (USE_STMT (phi_use_p)); |
| } |
| } |
| } |
| } |
| |
| FOR_EACH_VEC_ELT (phis, i, exit_phi) |
| { |
| /* Replace the uses: */ |
| orig_name = PHI_RESULT (exit_phi); |
| scalar_result = scalar_results[k]; |
| FOR_EACH_IMM_USE_STMT (use_stmt, imm_iter, orig_name) |
| FOR_EACH_IMM_USE_ON_STMT (use_p, imm_iter) |
| SET_USE (use_p, scalar_result); |
| } |
| |
| phis.release (); |
| } |
| } |
| |
| |
| /* Function vectorizable_reduction. |
| |
| Check if STMT performs a reduction operation that can be vectorized. |
| If VEC_STMT is also passed, vectorize the STMT: create a vectorized |
| stmt to replace it, put it in VEC_STMT, and insert it at GSI. |
| Return FALSE if not a vectorizable STMT, TRUE otherwise. |
| |
| This function also handles reduction idioms (patterns) that have been |
| recognized in advance during vect_pattern_recog. In this case, STMT may be |
| of this form: |
| X = pattern_expr (arg0, arg1, ..., X) |
| and it's STMT_VINFO_RELATED_STMT points to the last stmt in the original |
| sequence that had been detected and replaced by the pattern-stmt (STMT). |
| |
| In some cases of reduction patterns, the type of the reduction variable X is |
| different than the type of the other arguments of STMT. |
| In such cases, the vectype that is used when transforming STMT into a vector |
| stmt is different than the vectype that is used to determine the |
| vectorization factor, because it consists of a different number of elements |
| than the actual number of elements that are being operated upon in parallel. |
| |
| For example, consider an accumulation of shorts into an int accumulator. |
| On some targets it's possible to vectorize this pattern operating on 8 |
| shorts at a time (hence, the vectype for purposes of determining the |
| vectorization factor should be V8HI); on the other hand, the vectype that |
| is used to create the vector form is actually V4SI (the type of the result). |
| |
| Upon entry to this function, STMT_VINFO_VECTYPE records the vectype that |
| indicates what is the actual level of parallelism (V8HI in the example), so |
| that the right vectorization factor would be derived. This vectype |
| corresponds to the type of arguments to the reduction stmt, and should *NOT* |
| be used to create the vectorized stmt. The right vectype for the vectorized |
| stmt is obtained from the type of the result X: |
| get_vectype_for_scalar_type (TREE_TYPE (X)) |
| |
| This means that, contrary to "regular" reductions (or "regular" stmts in |
| general), the following equation: |
| STMT_VINFO_VECTYPE == get_vectype_for_scalar_type (TREE_TYPE (X)) |
| does *NOT* necessarily hold for reduction patterns. */ |
| |
| bool |
| vectorizable_reduction (gimple stmt, gimple_stmt_iterator *gsi, |
| gimple *vec_stmt, slp_tree slp_node) |
| { |
| tree vec_dest; |
| tree scalar_dest; |
| tree loop_vec_def0 = NULL_TREE, loop_vec_def1 = NULL_TREE; |
| stmt_vec_info stmt_info = vinfo_for_stmt (stmt); |
| tree vectype_out = STMT_VINFO_VECTYPE (stmt_info); |
| tree vectype_in = NULL_TREE; |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| enum tree_code code, orig_code, epilog_reduc_code; |
| enum machine_mode vec_mode; |
| int op_type; |
| optab optab, reduc_optab; |
| tree new_temp = NULL_TREE; |
| tree def; |
| gimple def_stmt; |
| enum vect_def_type dt; |
| gimple new_phi = NULL; |
| tree scalar_type; |
| bool is_simple_use; |
| gimple orig_stmt; |
| stmt_vec_info orig_stmt_info; |
| tree expr = NULL_TREE; |
| int i; |
| int ncopies; |
| int epilog_copies; |
| stmt_vec_info prev_stmt_info, prev_phi_info; |
| bool single_defuse_cycle = false; |
| tree reduc_def = NULL_TREE; |
| gimple new_stmt = NULL; |
| int j; |
| tree ops[3]; |
| bool nested_cycle = false, found_nested_cycle_def = false; |
| gimple reduc_def_stmt = NULL; |
| /* The default is that the reduction variable is the last in statement. */ |
| int reduc_index = 2; |
| bool double_reduc = false, dummy; |
| basic_block def_bb; |
| struct loop * def_stmt_loop, *outer_loop = NULL; |
| tree def_arg; |
| gimple def_arg_stmt; |
| auto_vec<tree> vec_oprnds0; |
| auto_vec<tree> vec_oprnds1; |
| auto_vec<tree> vect_defs; |
| auto_vec<gimple> phis; |
| int vec_num; |
| tree def0, def1, tem, op0, op1 = NULL_TREE; |
| |
| /* In case of reduction chain we switch to the first stmt in the chain, but |
| we don't update STMT_INFO, since only the last stmt is marked as reduction |
| and has reduction properties. */ |
| if (GROUP_FIRST_ELEMENT (vinfo_for_stmt (stmt))) |
| stmt = GROUP_FIRST_ELEMENT (stmt_info); |
| |
| if (nested_in_vect_loop_p (loop, stmt)) |
| { |
| outer_loop = loop; |
| loop = loop->inner; |
| nested_cycle = true; |
| } |
| |
| /* 1. Is vectorizable reduction? */ |
| /* Not supportable if the reduction variable is used in the loop, unless |
| it's a reduction chain. */ |
| if (STMT_VINFO_RELEVANT (stmt_info) > vect_used_in_outer |
| && !GROUP_FIRST_ELEMENT (stmt_info)) |
| return false; |
| |
| /* Reductions that are not used even in an enclosing outer-loop, |
| are expected to be "live" (used out of the loop). */ |
| if (STMT_VINFO_RELEVANT (stmt_info) == vect_unused_in_scope |
| && !STMT_VINFO_LIVE_P (stmt_info)) |
| return false; |
| |
| /* Make sure it was already recognized as a reduction computation. */ |
| if (STMT_VINFO_DEF_TYPE (stmt_info) != vect_reduction_def |
| && STMT_VINFO_DEF_TYPE (stmt_info) != vect_nested_cycle) |
| return false; |
| |
| /* 2. Has this been recognized as a reduction pattern? |
| |
| Check if STMT represents a pattern that has been recognized |
| in earlier analysis stages. For stmts that represent a pattern, |
| the STMT_VINFO_RELATED_STMT field records the last stmt in |
| the original sequence that constitutes the pattern. */ |
| |
| orig_stmt = STMT_VINFO_RELATED_STMT (stmt_info); |
| if (orig_stmt) |
| { |
| orig_stmt_info = vinfo_for_stmt (orig_stmt); |
| gcc_assert (STMT_VINFO_IN_PATTERN_P (orig_stmt_info)); |
| gcc_assert (!STMT_VINFO_IN_PATTERN_P (stmt_info)); |
| } |
| |
| /* 3. Check the operands of the operation. The first operands are defined |
| inside the loop body. The last operand is the reduction variable, |
| which is defined by the loop-header-phi. */ |
| |
| gcc_assert (is_gimple_assign (stmt)); |
| |
| /* Flatten RHS. */ |
| switch (get_gimple_rhs_class (gimple_assign_rhs_code (stmt))) |
| { |
| case GIMPLE_SINGLE_RHS: |
| op_type = TREE_OPERAND_LENGTH (gimple_assign_rhs1 (stmt)); |
| if (op_type == ternary_op) |
| { |
| tree rhs = gimple_assign_rhs1 (stmt); |
| ops[0] = TREE_OPERAND (rhs, 0); |
| ops[1] = TREE_OPERAND (rhs, 1); |
| ops[2] = TREE_OPERAND (rhs, 2); |
| code = TREE_CODE (rhs); |
| } |
| else |
| return false; |
| break; |
| |
| case GIMPLE_BINARY_RHS: |
| code = gimple_assign_rhs_code (stmt); |
| op_type = TREE_CODE_LENGTH (code); |
| gcc_assert (op_type == binary_op); |
| ops[0] = gimple_assign_rhs1 (stmt); |
| ops[1] = gimple_assign_rhs2 (stmt); |
| break; |
| |
| case GIMPLE_TERNARY_RHS: |
| code = gimple_assign_rhs_code (stmt); |
| op_type = TREE_CODE_LENGTH (code); |
| gcc_assert (op_type == ternary_op); |
| ops[0] = gimple_assign_rhs1 (stmt); |
| ops[1] = gimple_assign_rhs2 (stmt); |
| ops[2] = gimple_assign_rhs3 (stmt); |
| break; |
| |
| case GIMPLE_UNARY_RHS: |
| return false; |
| |
| default: |
| gcc_unreachable (); |
| } |
| |
| if (code == COND_EXPR && slp_node) |
| return false; |
| |
| scalar_dest = gimple_assign_lhs (stmt); |
| scalar_type = TREE_TYPE (scalar_dest); |
| if (!POINTER_TYPE_P (scalar_type) && !INTEGRAL_TYPE_P (scalar_type) |
| && !SCALAR_FLOAT_TYPE_P (scalar_type)) |
| return false; |
| |
| /* Do not try to vectorize bit-precision reductions. */ |
| if ((TYPE_PRECISION (scalar_type) |
| != GET_MODE_PRECISION (TYPE_MODE (scalar_type)))) |
| return false; |
| |
| /* All uses but the last are expected to be defined in the loop. |
| The last use is the reduction variable. In case of nested cycle this |
| assumption is not true: we use reduc_index to record the index of the |
| reduction variable. */ |
| for (i = 0; i < op_type - 1; i++) |
| { |
| /* The condition of COND_EXPR is checked in vectorizable_condition(). */ |
| if (i == 0 && code == COND_EXPR) |
| continue; |
| |
| is_simple_use = vect_is_simple_use_1 (ops[i], stmt, loop_vinfo, NULL, |
| &def_stmt, &def, &dt, &tem); |
| if (!vectype_in) |
| vectype_in = tem; |
| gcc_assert (is_simple_use); |
| |
| if (dt != vect_internal_def |
| && dt != vect_external_def |
| && dt != vect_constant_def |
| && dt != vect_induction_def |
| && !(dt == vect_nested_cycle && nested_cycle)) |
| return false; |
| |
| if (dt == vect_nested_cycle) |
| { |
| found_nested_cycle_def = true; |
| reduc_def_stmt = def_stmt; |
| reduc_index = i; |
| } |
| } |
| |
| is_simple_use = vect_is_simple_use_1 (ops[i], stmt, loop_vinfo, NULL, |
| &def_stmt, &def, &dt, &tem); |
| if (!vectype_in) |
| vectype_in = tem; |
| gcc_assert (is_simple_use); |
| if (!(dt == vect_reduction_def |
| || dt == vect_nested_cycle |
| || ((dt == vect_internal_def || dt == vect_external_def |
| || dt == vect_constant_def || dt == vect_induction_def) |
| && nested_cycle && found_nested_cycle_def))) |
| { |
| /* For pattern recognized stmts, orig_stmt might be a reduction, |
| but some helper statements for the pattern might not, or |
| might be COND_EXPRs with reduction uses in the condition. */ |
| gcc_assert (orig_stmt); |
| return false; |
| } |
| if (!found_nested_cycle_def) |
| reduc_def_stmt = def_stmt; |
| |
| gcc_assert (gimple_code (reduc_def_stmt) == GIMPLE_PHI); |
| if (orig_stmt) |
| gcc_assert (orig_stmt == vect_is_simple_reduction (loop_vinfo, |
| reduc_def_stmt, |
| !nested_cycle, |
| &dummy)); |
| else |
| { |
| gimple tmp = vect_is_simple_reduction (loop_vinfo, reduc_def_stmt, |
| !nested_cycle, &dummy); |
| /* We changed STMT to be the first stmt in reduction chain, hence we |
| check that in this case the first element in the chain is STMT. */ |
| gcc_assert (stmt == tmp |
| || GROUP_FIRST_ELEMENT (vinfo_for_stmt (tmp)) == stmt); |
| } |
| |
| if (STMT_VINFO_LIVE_P (vinfo_for_stmt (reduc_def_stmt))) |
| return false; |
| |
| if (slp_node || PURE_SLP_STMT (stmt_info)) |
| ncopies = 1; |
| else |
| ncopies = (LOOP_VINFO_VECT_FACTOR (loop_vinfo) |
| / TYPE_VECTOR_SUBPARTS (vectype_in)); |
| |
| gcc_assert (ncopies >= 1); |
| |
| vec_mode = TYPE_MODE (vectype_in); |
| |
| if (code == COND_EXPR) |
| { |
| if (!vectorizable_condition (stmt, gsi, NULL, ops[reduc_index], 0, NULL)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported condition in reduction\n"); |
| |
| return false; |
| } |
| } |
| else |
| { |
| /* 4. Supportable by target? */ |
| |
| if (code == LSHIFT_EXPR || code == RSHIFT_EXPR |
| || code == LROTATE_EXPR || code == RROTATE_EXPR) |
| { |
| /* Shifts and rotates are only supported by vectorizable_shifts, |
| not vectorizable_reduction. */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "unsupported shift or rotation.\n"); |
| return false; |
| } |
| |
| /* 4.1. check support for the operation in the loop */ |
| optab = optab_for_tree_code (code, vectype_in, optab_default); |
| if (!optab) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "no optab.\n"); |
| |
| return false; |
| } |
| |
| if (optab_handler (optab, vec_mode) == CODE_FOR_nothing) |
| { |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "op not supported by target.\n"); |
| |
| if (GET_MODE_SIZE (vec_mode) != UNITS_PER_WORD |
| || LOOP_VINFO_VECT_FACTOR (loop_vinfo) |
| < vect_min_worthwhile_factor (code)) |
| return false; |
| |
| if (dump_enabled_p ()) |
| dump_printf (MSG_NOTE, "proceeding using word mode.\n"); |
| } |
| |
| /* Worthwhile without SIMD support? */ |
| if (!VECTOR_MODE_P (TYPE_MODE (vectype_in)) |
| && LOOP_VINFO_VECT_FACTOR (loop_vinfo) |
| < vect_min_worthwhile_factor (code)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "not worthwhile without SIMD support.\n"); |
| |
| return false; |
| } |
| } |
| |
| /* 4.2. Check support for the epilog operation. |
| |
| If STMT represents a reduction pattern, then the type of the |
| reduction variable may be different than the type of the rest |
| of the arguments. For example, consider the case of accumulation |
| of shorts into an int accumulator; The original code: |
| S1: int_a = (int) short_a; |
| orig_stmt-> S2: int_acc = plus <int_a ,int_acc>; |
| |
| was replaced with: |
| STMT: int_acc = widen_sum <short_a, int_acc> |
| |
| This means that: |
| 1. The tree-code that is used to create the vector operation in the |
| epilog code (that reduces the partial results) is not the |
| tree-code of STMT, but is rather the tree-code of the original |
| stmt from the pattern that STMT is replacing. I.e, in the example |
| above we want to use 'widen_sum' in the loop, but 'plus' in the |
| epilog. |
| 2. The type (mode) we use to check available target support |
| for the vector operation to be created in the *epilog*, is |
| determined by the type of the reduction variable (in the example |
| above we'd check this: optab_handler (plus_optab, vect_int_mode])). |
| However the type (mode) we use to check available target support |
| for the vector operation to be created *inside the loop*, is |
| determined by the type of the other arguments to STMT (in the |
| example we'd check this: optab_handler (widen_sum_optab, |
| vect_short_mode)). |
| |
| This is contrary to "regular" reductions, in which the types of all |
| the arguments are the same as the type of the reduction variable. |
| For "regular" reductions we can therefore use the same vector type |
| (and also the same tree-code) when generating the epilog code and |
| when generating the code inside the loop. */ |
| |
| if (orig_stmt) |
| { |
| /* This is a reduction pattern: get the vectype from the type of the |
| reduction variable, and get the tree-code from orig_stmt. */ |
| orig_code = gimple_assign_rhs_code (orig_stmt); |
| gcc_assert (vectype_out); |
| vec_mode = TYPE_MODE (vectype_out); |
| } |
| else |
| { |
| /* Regular reduction: use the same vectype and tree-code as used for |
| the vector code inside the loop can be used for the epilog code. */ |
| orig_code = code; |
| } |
| |
| if (nested_cycle) |
| { |
| def_bb = gimple_bb (reduc_def_stmt); |
| def_stmt_loop = def_bb->loop_father; |
| def_arg = PHI_ARG_DEF_FROM_EDGE (reduc_def_stmt, |
| loop_preheader_edge (def_stmt_loop)); |
| if (TREE_CODE (def_arg) == SSA_NAME |
| && (def_arg_stmt = SSA_NAME_DEF_STMT (def_arg)) |
| && gimple_code (def_arg_stmt) == GIMPLE_PHI |
| && flow_bb_inside_loop_p (outer_loop, gimple_bb (def_arg_stmt)) |
| && vinfo_for_stmt (def_arg_stmt) |
| && STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_arg_stmt)) |
| == vect_double_reduction_def) |
| double_reduc = true; |
| } |
| |
| epilog_reduc_code = ERROR_MARK; |
| if (reduction_code_for_scalar_code (orig_code, &epilog_reduc_code)) |
| { |
| reduc_optab = optab_for_tree_code (epilog_reduc_code, vectype_out, |
| optab_default); |
| if (!reduc_optab) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "no optab for reduction.\n"); |
| |
| epilog_reduc_code = ERROR_MARK; |
| } |
| |
| if (reduc_optab |
| && optab_handler (reduc_optab, vec_mode) == CODE_FOR_nothing) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "reduc op not supported by target.\n"); |
| |
| epilog_reduc_code = ERROR_MARK; |
| } |
| } |
| else |
| { |
| if (!nested_cycle || double_reduc) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "no reduc code for scalar code.\n"); |
| |
| return false; |
| } |
| } |
| |
| if (double_reduc && ncopies > 1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "multiple types in double reduction\n"); |
| |
| return false; |
| } |
| |
| /* In case of widenning multiplication by a constant, we update the type |
| of the constant to be the type of the other operand. We check that the |
| constant fits the type in the pattern recognition pass. */ |
| if (code == DOT_PROD_EXPR |
| && !types_compatible_p (TREE_TYPE (ops[0]), TREE_TYPE (ops[1]))) |
| { |
| if (TREE_CODE (ops[0]) == INTEGER_CST) |
| ops[0] = fold_convert (TREE_TYPE (ops[1]), ops[0]); |
| else if (TREE_CODE (ops[1]) == INTEGER_CST) |
| ops[1] = fold_convert (TREE_TYPE (ops[0]), ops[1]); |
| else |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "invalid types in dot-prod\n"); |
| |
| return false; |
| } |
| } |
| |
| if (!vec_stmt) /* transformation not required. */ |
| { |
| if (!vect_model_reduction_cost (stmt_info, epilog_reduc_code, ncopies)) |
| return false; |
| STMT_VINFO_TYPE (stmt_info) = reduc_vec_info_type; |
| return true; |
| } |
| |
| /** Transform. **/ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "transform reduction.\n"); |
| |
| /* FORNOW: Multiple types are not supported for condition. */ |
| if (code == COND_EXPR) |
| gcc_assert (ncopies == 1); |
| |
| /* Create the destination vector */ |
| vec_dest = vect_create_destination_var (scalar_dest, vectype_out); |
| |
| /* In case the vectorization factor (VF) is bigger than the number |
| of elements that we can fit in a vectype (nunits), we have to generate |
| more than one vector stmt - i.e - we need to "unroll" the |
| vector stmt by a factor VF/nunits. For more details see documentation |
| in vectorizable_operation. */ |
| |
| /* If the reduction is used in an outer loop we need to generate |
| VF intermediate results, like so (e.g. for ncopies=2): |
| r0 = phi (init, r0) |
| r1 = phi (init, r1) |
| r0 = x0 + r0; |
| r1 = x1 + r1; |
| (i.e. we generate VF results in 2 registers). |
| In this case we have a separate def-use cycle for each copy, and therefore |
| for each copy we get the vector def for the reduction variable from the |
| respective phi node created for this copy. |
| |
| Otherwise (the reduction is unused in the loop nest), we can combine |
| together intermediate results, like so (e.g. for ncopies=2): |
| r = phi (init, r) |
| r = x0 + r; |
| r = x1 + r; |
| (i.e. we generate VF/2 results in a single register). |
| In this case for each copy we get the vector def for the reduction variable |
| from the vectorized reduction operation generated in the previous iteration. |
| */ |
| |
| if (STMT_VINFO_RELEVANT (stmt_info) == vect_unused_in_scope) |
| { |
| single_defuse_cycle = true; |
| epilog_copies = 1; |
| } |
| else |
| epilog_copies = ncopies; |
| |
| prev_stmt_info = NULL; |
| prev_phi_info = NULL; |
| if (slp_node) |
| { |
| vec_num = SLP_TREE_NUMBER_OF_VEC_STMTS (slp_node); |
| gcc_assert (TYPE_VECTOR_SUBPARTS (vectype_out) |
| == TYPE_VECTOR_SUBPARTS (vectype_in)); |
| } |
| else |
| { |
| vec_num = 1; |
| vec_oprnds0.create (1); |
| if (op_type == ternary_op) |
| vec_oprnds1.create (1); |
| } |
| |
| phis.create (vec_num); |
| vect_defs.create (vec_num); |
| if (!slp_node) |
| vect_defs.quick_push (NULL_TREE); |
| |
| for (j = 0; j < ncopies; j++) |
| { |
| if (j == 0 || !single_defuse_cycle) |
| { |
| for (i = 0; i < vec_num; i++) |
| { |
| /* Create the reduction-phi that defines the reduction |
| operand. */ |
| new_phi = create_phi_node (vec_dest, loop->header); |
| set_vinfo_for_stmt (new_phi, |
| new_stmt_vec_info (new_phi, loop_vinfo, |
| NULL)); |
| if (j == 0 || slp_node) |
| phis.quick_push (new_phi); |
| } |
| } |
| |
| if (code == COND_EXPR) |
| { |
| gcc_assert (!slp_node); |
| vectorizable_condition (stmt, gsi, vec_stmt, |
| PHI_RESULT (phis[0]), |
| reduc_index, NULL); |
| /* Multiple types are not supported for condition. */ |
| break; |
| } |
| |
| /* Handle uses. */ |
| if (j == 0) |
| { |
| op0 = ops[!reduc_index]; |
| if (op_type == ternary_op) |
| { |
| if (reduc_index == 0) |
| op1 = ops[2]; |
| else |
| op1 = ops[1]; |
| } |
| |
| if (slp_node) |
| vect_get_vec_defs (op0, op1, stmt, &vec_oprnds0, &vec_oprnds1, |
| slp_node, -1); |
| else |
| { |
| loop_vec_def0 = vect_get_vec_def_for_operand (ops[!reduc_index], |
| stmt, NULL); |
| vec_oprnds0.quick_push (loop_vec_def0); |
| if (op_type == ternary_op) |
| { |
| loop_vec_def1 = vect_get_vec_def_for_operand (op1, stmt, |
| NULL); |
| vec_oprnds1.quick_push (loop_vec_def1); |
| } |
| } |
| } |
| else |
| { |
| if (!slp_node) |
| { |
| enum vect_def_type dt; |
| gimple dummy_stmt; |
| tree dummy; |
| |
| vect_is_simple_use (ops[!reduc_index], stmt, loop_vinfo, NULL, |
| &dummy_stmt, &dummy, &dt); |
| loop_vec_def0 = vect_get_vec_def_for_stmt_copy (dt, |
| loop_vec_def0); |
| vec_oprnds0[0] = loop_vec_def0; |
| if (op_type == ternary_op) |
| { |
| vect_is_simple_use (op1, stmt, loop_vinfo, NULL, &dummy_stmt, |
| &dummy, &dt); |
| loop_vec_def1 = vect_get_vec_def_for_stmt_copy (dt, |
| loop_vec_def1); |
| vec_oprnds1[0] = loop_vec_def1; |
| } |
| } |
| |
| if (single_defuse_cycle) |
| reduc_def = gimple_assign_lhs (new_stmt); |
| |
| STMT_VINFO_RELATED_STMT (prev_phi_info) = new_phi; |
| } |
| |
| FOR_EACH_VEC_ELT (vec_oprnds0, i, def0) |
| { |
| if (slp_node) |
| reduc_def = PHI_RESULT (phis[i]); |
| else |
| { |
| if (!single_defuse_cycle || j == 0) |
| reduc_def = PHI_RESULT (new_phi); |
| } |
| |
| def1 = ((op_type == ternary_op) |
| ? vec_oprnds1[i] : NULL); |
| if (op_type == binary_op) |
| { |
| if (reduc_index == 0) |
| expr = build2 (code, vectype_out, reduc_def, def0); |
| else |
| expr = build2 (code, vectype_out, def0, reduc_def); |
| } |
| else |
| { |
| if (reduc_index == 0) |
| expr = build3 (code, vectype_out, reduc_def, def0, def1); |
| else |
| { |
| if (reduc_index == 1) |
| expr = build3 (code, vectype_out, def0, reduc_def, def1); |
| else |
| expr = build3 (code, vectype_out, def0, def1, reduc_def); |
| } |
| } |
| |
| new_stmt = gimple_build_assign (vec_dest, expr); |
| new_temp = make_ssa_name (vec_dest, new_stmt); |
| gimple_assign_set_lhs (new_stmt, new_temp); |
| vect_finish_stmt_generation (stmt, new_stmt, gsi); |
| |
| if (slp_node) |
| { |
| SLP_TREE_VEC_STMTS (slp_node).quick_push (new_stmt); |
| vect_defs.quick_push (new_temp); |
| } |
| else |
| vect_defs[0] = new_temp; |
| } |
| |
| if (slp_node) |
| continue; |
| |
| if (j == 0) |
| STMT_VINFO_VEC_STMT (stmt_info) = *vec_stmt = new_stmt; |
| else |
| STMT_VINFO_RELATED_STMT (prev_stmt_info) = new_stmt; |
| |
| prev_stmt_info = vinfo_for_stmt (new_stmt); |
| prev_phi_info = vinfo_for_stmt (new_phi); |
| } |
| |
| /* Finalize the reduction-phi (set its arguments) and create the |
| epilog reduction code. */ |
| if ((!single_defuse_cycle || code == COND_EXPR) && !slp_node) |
| { |
| new_temp = gimple_assign_lhs (*vec_stmt); |
| vect_defs[0] = new_temp; |
| } |
| |
| vect_create_epilog_for_reduction (vect_defs, stmt, epilog_copies, |
| epilog_reduc_code, phis, reduc_index, |
| double_reduc, slp_node); |
| |
| return true; |
| } |
| |
| /* Function vect_min_worthwhile_factor. |
| |
| For a loop where we could vectorize the operation indicated by CODE, |
| return the minimum vectorization factor that makes it worthwhile |
| to use generic vectors. */ |
| int |
| vect_min_worthwhile_factor (enum tree_code code) |
| { |
| switch (code) |
| { |
| case PLUS_EXPR: |
| case MINUS_EXPR: |
| case NEGATE_EXPR: |
| return 4; |
| |
| case BIT_AND_EXPR: |
| case BIT_IOR_EXPR: |
| case BIT_XOR_EXPR: |
| case BIT_NOT_EXPR: |
| return 2; |
| |
| default: |
| return INT_MAX; |
| } |
| } |
| |
| |
| /* Function vectorizable_induction |
| |
| Check if PHI performs an induction computation that can be vectorized. |
| If VEC_STMT is also passed, vectorize the induction PHI: create a vectorized |
| phi to replace it, put it in VEC_STMT, and add it to the same basic block. |
| Return FALSE if not a vectorizable STMT, TRUE otherwise. */ |
| |
| bool |
| vectorizable_induction (gimple phi, gimple_stmt_iterator *gsi ATTRIBUTE_UNUSED, |
| gimple *vec_stmt) |
| { |
| stmt_vec_info stmt_info = vinfo_for_stmt (phi); |
| tree vectype = STMT_VINFO_VECTYPE (stmt_info); |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| int nunits = TYPE_VECTOR_SUBPARTS (vectype); |
| int ncopies = LOOP_VINFO_VECT_FACTOR (loop_vinfo) / nunits; |
| tree vec_def; |
| |
| gcc_assert (ncopies >= 1); |
| /* FORNOW. These restrictions should be relaxed. */ |
| if (nested_in_vect_loop_p (loop, phi)) |
| { |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| gimple exit_phi; |
| edge latch_e; |
| tree loop_arg; |
| |
| if (ncopies > 1) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "multiple types in nested loop.\n"); |
| return false; |
| } |
| |
| exit_phi = NULL; |
| latch_e = loop_latch_edge (loop->inner); |
| loop_arg = PHI_ARG_DEF_FROM_EDGE (phi, latch_e); |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, loop_arg) |
| { |
| gimple use_stmt = USE_STMT (use_p); |
| if (is_gimple_debug (use_stmt)) |
| continue; |
| |
| if (!flow_bb_inside_loop_p (loop->inner, gimple_bb (use_stmt))) |
| { |
| exit_phi = use_stmt; |
| break; |
| } |
| } |
| if (exit_phi) |
| { |
| stmt_vec_info exit_phi_vinfo = vinfo_for_stmt (exit_phi); |
| if (!(STMT_VINFO_RELEVANT_P (exit_phi_vinfo) |
| && !STMT_VINFO_LIVE_P (exit_phi_vinfo))) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "inner-loop induction only used outside " |
| "of the outer vectorized loop.\n"); |
| return false; |
| } |
| } |
| } |
| |
| if (!STMT_VINFO_RELEVANT_P (stmt_info)) |
| return false; |
| |
| /* FORNOW: SLP not supported. */ |
| if (STMT_SLP_TYPE (stmt_info)) |
| return false; |
| |
| gcc_assert (STMT_VINFO_DEF_TYPE (stmt_info) == vect_induction_def); |
| |
| if (gimple_code (phi) != GIMPLE_PHI) |
| return false; |
| |
| if (!vec_stmt) /* transformation not required. */ |
| { |
| STMT_VINFO_TYPE (stmt_info) = induc_vec_info_type; |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "=== vectorizable_induction ===\n"); |
| vect_model_induction_cost (stmt_info, ncopies); |
| return true; |
| } |
| |
| /** Transform. **/ |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "transform induction phi.\n"); |
| |
| vec_def = get_initial_def_for_induction (phi); |
| *vec_stmt = SSA_NAME_DEF_STMT (vec_def); |
| return true; |
| } |
| |
| /* Function vectorizable_live_operation. |
| |
| STMT computes a value that is used outside the loop. Check if |
| it can be supported. */ |
| |
| bool |
| vectorizable_live_operation (gimple stmt, |
| gimple_stmt_iterator *gsi ATTRIBUTE_UNUSED, |
| gimple *vec_stmt) |
| { |
| stmt_vec_info stmt_info = vinfo_for_stmt (stmt); |
| loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info); |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| int i; |
| int op_type; |
| tree op; |
| tree def; |
| gimple def_stmt; |
| enum vect_def_type dt; |
| enum tree_code code; |
| enum gimple_rhs_class rhs_class; |
| |
| gcc_assert (STMT_VINFO_LIVE_P (stmt_info)); |
| |
| if (STMT_VINFO_DEF_TYPE (stmt_info) == vect_reduction_def) |
| return false; |
| |
| if (!is_gimple_assign (stmt)) |
| { |
| if (gimple_call_internal_p (stmt) |
| && gimple_call_internal_fn (stmt) == IFN_GOMP_SIMD_LANE |
| && gimple_call_lhs (stmt) |
| && loop->simduid |
| && TREE_CODE (gimple_call_arg (stmt, 0)) == SSA_NAME |
| && loop->simduid |
| == SSA_NAME_VAR (gimple_call_arg (stmt, 0))) |
| { |
| edge e = single_exit (loop); |
| basic_block merge_bb = e->dest; |
| imm_use_iterator imm_iter; |
| use_operand_p use_p; |
| tree lhs = gimple_call_lhs (stmt); |
| |
| FOR_EACH_IMM_USE_FAST (use_p, imm_iter, lhs) |
| { |
| gimple use_stmt = USE_STMT (use_p); |
| if (gimple_code (use_stmt) == GIMPLE_PHI |
| && gimple_bb (use_stmt) == merge_bb) |
| { |
| if (vec_stmt) |
| { |
| tree vfm1 |
| = build_int_cst (unsigned_type_node, |
| loop_vinfo->vectorization_factor - 1); |
| SET_PHI_ARG_DEF (use_stmt, e->dest_idx, vfm1); |
| } |
| return true; |
| } |
| } |
| } |
| |
| return false; |
| } |
| |
| if (TREE_CODE (gimple_assign_lhs (stmt)) != SSA_NAME) |
| return false; |
| |
| /* FORNOW. CHECKME. */ |
| if (nested_in_vect_loop_p (loop, stmt)) |
| return false; |
| |
| code = gimple_assign_rhs_code (stmt); |
| op_type = TREE_CODE_LENGTH (code); |
| rhs_class = get_gimple_rhs_class (code); |
| gcc_assert (rhs_class != GIMPLE_UNARY_RHS || op_type == unary_op); |
| gcc_assert (rhs_class != GIMPLE_BINARY_RHS || op_type == binary_op); |
| |
| /* FORNOW: support only if all uses are invariant. This means |
| that the scalar operations can remain in place, unvectorized. |
| The original last scalar value that they compute will be used. */ |
| |
| for (i = 0; i < op_type; i++) |
| { |
| if (rhs_class == GIMPLE_SINGLE_RHS) |
| op = TREE_OPERAND (gimple_op (stmt, 1), i); |
| else |
| op = gimple_op (stmt, i + 1); |
| if (op |
| && !vect_is_simple_use (op, stmt, loop_vinfo, NULL, &def_stmt, &def, |
| &dt)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location, |
| "use not simple.\n"); |
| return false; |
| } |
| |
| if (dt != vect_external_def && dt != vect_constant_def) |
| return false; |
| } |
| |
| /* No transformation is required for the cases we currently support. */ |
| return true; |
| } |
| |
| /* Kill any debug uses outside LOOP of SSA names defined in STMT. */ |
| |
| static void |
| vect_loop_kill_debug_uses (struct loop *loop, gimple stmt) |
| { |
| ssa_op_iter op_iter; |
| imm_use_iterator imm_iter; |
| def_operand_p def_p; |
| gimple ustmt; |
| |
| FOR_EACH_PHI_OR_STMT_DEF (def_p, stmt, op_iter, SSA_OP_DEF) |
| { |
| FOR_EACH_IMM_USE_STMT (ustmt, imm_iter, DEF_FROM_PTR (def_p)) |
| { |
| basic_block bb; |
| |
| if (!is_gimple_debug (ustmt)) |
| continue; |
| |
| bb = gimple_bb (ustmt); |
| |
| if (!flow_bb_inside_loop_p (loop, bb)) |
| { |
| if (gimple_debug_bind_p (ustmt)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "killing debug use\n"); |
| |
| gimple_debug_bind_reset_value (ustmt); |
| update_stmt (ustmt); |
| } |
| else |
| gcc_unreachable (); |
| } |
| } |
| } |
| } |
| |
| |
| /* This function builds ni_name = number of iterations. Statements |
| are emitted on the loop preheader edge. */ |
| |
| static tree |
| vect_build_loop_niters (loop_vec_info loop_vinfo) |
| { |
| tree ni = unshare_expr (LOOP_VINFO_NITERS (loop_vinfo)); |
| if (TREE_CODE (ni) == INTEGER_CST) |
| return ni; |
| else |
| { |
| tree ni_name, var; |
| gimple_seq stmts = NULL; |
| edge pe = loop_preheader_edge (LOOP_VINFO_LOOP (loop_vinfo)); |
| |
| var = create_tmp_var (TREE_TYPE (ni), "niters"); |
| ni_name = force_gimple_operand (ni, &stmts, false, var); |
| if (stmts) |
| gsi_insert_seq_on_edge_immediate (pe, stmts); |
| |
| return ni_name; |
| } |
| } |
| |
| |
| /* This function generates the following statements: |
| |
| ni_name = number of iterations loop executes |
| ratio = ni_name / vf |
| ratio_mult_vf_name = ratio * vf |
| |
| and places them on the loop preheader edge. */ |
| |
| static void |
| vect_generate_tmps_on_preheader (loop_vec_info loop_vinfo, |
| tree ni_name, |
| tree *ratio_mult_vf_name_ptr, |
| tree *ratio_name_ptr) |
| { |
| tree ni_minus_gap_name; |
| tree var; |
| tree ratio_name; |
| tree ratio_mult_vf_name; |
| int vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| edge pe = loop_preheader_edge (LOOP_VINFO_LOOP (loop_vinfo)); |
| tree log_vf; |
| |
| log_vf = build_int_cst (TREE_TYPE (ni_name), exact_log2 (vf)); |
| |
| /* If epilogue loop is required because of data accesses with gaps, we |
| subtract one iteration from the total number of iterations here for |
| correct calculation of RATIO. */ |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo)) |
| { |
| ni_minus_gap_name = fold_build2 (MINUS_EXPR, TREE_TYPE (ni_name), |
| ni_name, |
| build_one_cst (TREE_TYPE (ni_name))); |
| if (!is_gimple_val (ni_minus_gap_name)) |
| { |
| var = create_tmp_var (TREE_TYPE (ni_name), "ni_gap"); |
| gimple stmts = NULL; |
| ni_minus_gap_name = force_gimple_operand (ni_minus_gap_name, &stmts, |
| true, var); |
| gsi_insert_seq_on_edge_immediate (pe, stmts); |
| } |
| } |
| else |
| ni_minus_gap_name = ni_name; |
| |
| /* Create: ratio = ni >> log2(vf) */ |
| /* ??? As we have ni == number of latch executions + 1, ni could |
| have overflown to zero. So avoid computing ratio based on ni |
| but compute it using the fact that we know ratio will be at least |
| one, thus via (ni - vf) >> log2(vf) + 1. */ |
| ratio_name |
| = fold_build2 (PLUS_EXPR, TREE_TYPE (ni_name), |
| fold_build2 (RSHIFT_EXPR, TREE_TYPE (ni_name), |
| fold_build2 (MINUS_EXPR, TREE_TYPE (ni_name), |
| ni_minus_gap_name, |
| build_int_cst |
| (TREE_TYPE (ni_name), vf)), |
| log_vf), |
| build_int_cst (TREE_TYPE (ni_name), 1)); |
| if (!is_gimple_val (ratio_name)) |
| { |
| var = create_tmp_var (TREE_TYPE (ni_name), "bnd"); |
| gimple stmts = NULL; |
| ratio_name = force_gimple_operand (ratio_name, &stmts, true, var); |
| gsi_insert_seq_on_edge_immediate (pe, stmts); |
| } |
| *ratio_name_ptr = ratio_name; |
| |
| /* Create: ratio_mult_vf = ratio << log2 (vf). */ |
| |
| if (ratio_mult_vf_name_ptr) |
| { |
| ratio_mult_vf_name = fold_build2 (LSHIFT_EXPR, TREE_TYPE (ratio_name), |
| ratio_name, log_vf); |
| if (!is_gimple_val (ratio_mult_vf_name)) |
| { |
| var = create_tmp_var (TREE_TYPE (ni_name), "ratio_mult_vf"); |
| gimple stmts = NULL; |
| ratio_mult_vf_name = force_gimple_operand (ratio_mult_vf_name, &stmts, |
| true, var); |
| gsi_insert_seq_on_edge_immediate (pe, stmts); |
| } |
| *ratio_mult_vf_name_ptr = ratio_mult_vf_name; |
| } |
| |
| return; |
| } |
| |
| |
| /* Function vect_transform_loop. |
| |
| The analysis phase has determined that the loop is vectorizable. |
| Vectorize the loop - created vectorized stmts to replace the scalar |
| stmts in the loop, and update the loop exit condition. */ |
| |
| void |
| vect_transform_loop (loop_vec_info loop_vinfo) |
| { |
| struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo); |
| basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo); |
| int nbbs = loop->num_nodes; |
| gimple_stmt_iterator si; |
| int i; |
| tree ratio = NULL; |
| int vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo); |
| bool grouped_store; |
| bool slp_scheduled = false; |
| gimple stmt, pattern_stmt; |
| gimple_seq pattern_def_seq = NULL; |
| gimple_stmt_iterator pattern_def_si = gsi_none (); |
| bool transform_pattern_stmt = false; |
| bool check_profitability = false; |
| int th; |
| /* Record number of iterations before we started tampering with the profile. */ |
| gcov_type expected_iterations = expected_loop_iterations_unbounded (loop); |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "=== vec_transform_loop ===\n"); |
| |
| /* If profile is inprecise, we have chance to fix it up. */ |
| if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| expected_iterations = LOOP_VINFO_INT_NITERS (loop_vinfo); |
| |
| /* Use the more conservative vectorization threshold. If the number |
| of iterations is constant assume the cost check has been performed |
| by our caller. If the threshold makes all loops profitable that |
| run at least the vectorization factor number of times checking |
| is pointless, too. */ |
| th = LOOP_VINFO_COST_MODEL_THRESHOLD (loop_vinfo); |
| if (th >= LOOP_VINFO_VECT_FACTOR (loop_vinfo) - 1 |
| && !LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "Profitability threshold is %d loop iterations.\n", |
| th); |
| check_profitability = true; |
| } |
| |
| /* Version the loop first, if required, so the profitability check |
| comes first. */ |
| |
| if (LOOP_REQUIRES_VERSIONING_FOR_ALIGNMENT (loop_vinfo) |
| || LOOP_REQUIRES_VERSIONING_FOR_ALIAS (loop_vinfo)) |
| { |
| vect_loop_versioning (loop_vinfo, th, check_profitability); |
| check_profitability = false; |
| } |
| |
| tree ni_name = vect_build_loop_niters (loop_vinfo); |
| LOOP_VINFO_NITERS_UNCHANGED (loop_vinfo) = ni_name; |
| |
| /* Peel the loop if there are data refs with unknown alignment. |
| Only one data ref with unknown store is allowed. */ |
| |
| if (LOOP_VINFO_PEELING_FOR_ALIGNMENT (loop_vinfo)) |
| { |
| vect_do_peeling_for_alignment (loop_vinfo, ni_name, |
| th, check_profitability); |
| check_profitability = false; |
| /* The above adjusts LOOP_VINFO_NITERS, so cause ni_name to |
| be re-computed. */ |
| ni_name = NULL_TREE; |
| } |
| |
| /* If the loop has a symbolic number of iterations 'n' (i.e. it's not a |
| compile time constant), or it is a constant that doesn't divide by the |
| vectorization factor, then an epilog loop needs to be created. |
| We therefore duplicate the loop: the original loop will be vectorized, |
| and will compute the first (n/VF) iterations. The second copy of the loop |
| will remain scalar and will compute the remaining (n%VF) iterations. |
| (VF is the vectorization factor). */ |
| |
| if (LOOP_VINFO_PEELING_FOR_NITER (loop_vinfo) |
| || LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo)) |
| { |
| tree ratio_mult_vf; |
| if (!ni_name) |
| ni_name = vect_build_loop_niters (loop_vinfo); |
| vect_generate_tmps_on_preheader (loop_vinfo, ni_name, &ratio_mult_vf, |
| &ratio); |
| vect_do_peeling_for_loop_bound (loop_vinfo, ni_name, ratio_mult_vf, |
| th, check_profitability); |
| } |
| else if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)) |
| ratio = build_int_cst (TREE_TYPE (LOOP_VINFO_NITERS (loop_vinfo)), |
| LOOP_VINFO_INT_NITERS (loop_vinfo) / vectorization_factor); |
| else |
| { |
| if (!ni_name) |
| ni_name = vect_build_loop_niters (loop_vinfo); |
| vect_generate_tmps_on_preheader (loop_vinfo, ni_name, NULL, &ratio); |
| } |
| |
| /* 1) Make sure the loop header has exactly two entries |
| 2) Make sure we have a preheader basic block. */ |
| |
| gcc_assert (EDGE_COUNT (loop->header->preds) == 2); |
| |
| split_edge (loop_preheader_edge (loop)); |
| |
| /* FORNOW: the vectorizer supports only loops which body consist |
| of one basic block (header + empty latch). When the vectorizer will |
| support more involved loop forms, the order by which the BBs are |
| traversed need to be reconsidered. */ |
| |
| for (i = 0; i < nbbs; i++) |
| { |
| basic_block bb = bbs[i]; |
| stmt_vec_info stmt_info; |
| gimple phi; |
| |
| for (si = gsi_start_phis (bb); !gsi_end_p (si); gsi_next (&si)) |
| { |
| phi = gsi_stmt (si); |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "------>vectorizing phi: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, phi, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| stmt_info = vinfo_for_stmt (phi); |
| if (!stmt_info) |
| continue; |
| |
| if (MAY_HAVE_DEBUG_STMTS && !STMT_VINFO_LIVE_P (stmt_info)) |
| vect_loop_kill_debug_uses (loop, phi); |
| |
| if (!STMT_VINFO_RELEVANT_P (stmt_info) |
| && !STMT_VINFO_LIVE_P (stmt_info)) |
| continue; |
| |
| if (STMT_VINFO_VECTYPE (stmt_info) |
| && (TYPE_VECTOR_SUBPARTS (STMT_VINFO_VECTYPE (stmt_info)) |
| != (unsigned HOST_WIDE_INT) vectorization_factor) |
| && dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "multiple-types.\n"); |
| |
| if (STMT_VINFO_DEF_TYPE (stmt_info) == vect_induction_def) |
| { |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "transform phi.\n"); |
| vect_transform_stmt (phi, NULL, NULL, NULL, NULL); |
| } |
| } |
| |
| pattern_stmt = NULL; |
| for (si = gsi_start_bb (bb); !gsi_end_p (si) || transform_pattern_stmt;) |
| { |
| bool is_store; |
| |
| if (transform_pattern_stmt) |
| stmt = pattern_stmt; |
| else |
| { |
| stmt = gsi_stmt (si); |
| /* During vectorization remove existing clobber stmts. */ |
| if (gimple_clobber_p (stmt)) |
| { |
| unlink_stmt_vdef (stmt); |
| gsi_remove (&si, true); |
| release_defs (stmt); |
| continue; |
| } |
| } |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "------>vectorizing statement: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| stmt_info = vinfo_for_stmt (stmt); |
| |
| /* vector stmts created in the outer-loop during vectorization of |
| stmts in an inner-loop may not have a stmt_info, and do not |
| need to be vectorized. */ |
| if (!stmt_info) |
| { |
| gsi_next (&si); |
| continue; |
| } |
| |
| if (MAY_HAVE_DEBUG_STMTS && !STMT_VINFO_LIVE_P (stmt_info)) |
| vect_loop_kill_debug_uses (loop, stmt); |
| |
| if (!STMT_VINFO_RELEVANT_P (stmt_info) |
| && !STMT_VINFO_LIVE_P (stmt_info)) |
| { |
| if (STMT_VINFO_IN_PATTERN_P (stmt_info) |
| && (pattern_stmt = STMT_VINFO_RELATED_STMT (stmt_info)) |
| && (STMT_VINFO_RELEVANT_P (vinfo_for_stmt (pattern_stmt)) |
| || STMT_VINFO_LIVE_P (vinfo_for_stmt (pattern_stmt)))) |
| { |
| stmt = pattern_stmt; |
| stmt_info = vinfo_for_stmt (stmt); |
| } |
| else |
| { |
| gsi_next (&si); |
| continue; |
| } |
| } |
| else if (STMT_VINFO_IN_PATTERN_P (stmt_info) |
| && (pattern_stmt = STMT_VINFO_RELATED_STMT (stmt_info)) |
| && (STMT_VINFO_RELEVANT_P (vinfo_for_stmt (pattern_stmt)) |
| || STMT_VINFO_LIVE_P (vinfo_for_stmt (pattern_stmt)))) |
| transform_pattern_stmt = true; |
| |
| /* If pattern statement has def stmts, vectorize them too. */ |
| if (is_pattern_stmt_p (stmt_info)) |
| { |
| if (pattern_def_seq == NULL) |
| { |
| pattern_def_seq = STMT_VINFO_PATTERN_DEF_SEQ (stmt_info); |
| pattern_def_si = gsi_start (pattern_def_seq); |
| } |
| else if (!gsi_end_p (pattern_def_si)) |
| gsi_next (&pattern_def_si); |
| if (pattern_def_seq != NULL) |
| { |
| gimple pattern_def_stmt = NULL; |
| stmt_vec_info pattern_def_stmt_info = NULL; |
| |
| while (!gsi_end_p (pattern_def_si)) |
| { |
| pattern_def_stmt = gsi_stmt (pattern_def_si); |
| pattern_def_stmt_info |
| = vinfo_for_stmt (pattern_def_stmt); |
| if (STMT_VINFO_RELEVANT_P (pattern_def_stmt_info) |
| || STMT_VINFO_LIVE_P (pattern_def_stmt_info)) |
| break; |
| gsi_next (&pattern_def_si); |
| } |
| |
| if (!gsi_end_p (pattern_def_si)) |
| { |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "==> vectorizing pattern def " |
| "stmt: "); |
| dump_gimple_stmt (MSG_NOTE, TDF_SLIM, |
| pattern_def_stmt, 0); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| |
| stmt = pattern_def_stmt; |
| stmt_info = pattern_def_stmt_info; |
| } |
| else |
| { |
| pattern_def_si = gsi_none (); |
| transform_pattern_stmt = false; |
| } |
| } |
| else |
| transform_pattern_stmt = false; |
| } |
| |
| if (STMT_VINFO_VECTYPE (stmt_info)) |
| { |
| unsigned int nunits |
| = (unsigned int) |
| TYPE_VECTOR_SUBPARTS (STMT_VINFO_VECTYPE (stmt_info)); |
| if (!STMT_SLP_TYPE (stmt_info) |
| && nunits != (unsigned int) vectorization_factor |
| && dump_enabled_p ()) |
| /* For SLP VF is set according to unrolling factor, and not |
| to vector size, hence for SLP this print is not valid. */ |
| dump_printf_loc (MSG_NOTE, vect_location, "multiple-types.\n"); |
| } |
| |
| /* SLP. Schedule all the SLP instances when the first SLP stmt is |
| reached. */ |
| if (STMT_SLP_TYPE (stmt_info)) |
| { |
| if (!slp_scheduled) |
| { |
| slp_scheduled = true; |
| |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "=== scheduling SLP instances ===\n"); |
| |
| vect_schedule_slp (loop_vinfo, NULL); |
| } |
| |
| /* Hybrid SLP stmts must be vectorized in addition to SLP. */ |
| if (!vinfo_for_stmt (stmt) || PURE_SLP_STMT (stmt_info)) |
| { |
| if (!transform_pattern_stmt && gsi_end_p (pattern_def_si)) |
| { |
| pattern_def_seq = NULL; |
| gsi_next (&si); |
| } |
| continue; |
| } |
| } |
| |
| /* -------- vectorize statement ------------ */ |
| if (dump_enabled_p ()) |
| dump_printf_loc (MSG_NOTE, vect_location, "transform statement.\n"); |
| |
| grouped_store = false; |
| is_store = vect_transform_stmt (stmt, &si, &grouped_store, NULL, NULL); |
| if (is_store) |
| { |
| if (STMT_VINFO_GROUPED_ACCESS (stmt_info)) |
| { |
| /* Interleaving. If IS_STORE is TRUE, the vectorization of the |
| interleaving chain was completed - free all the stores in |
| the chain. */ |
| gsi_next (&si); |
| vect_remove_stores (GROUP_FIRST_ELEMENT (stmt_info)); |
| } |
| else |
| { |
| /* Free the attached stmt_vec_info and remove the stmt. */ |
| gimple store = gsi_stmt (si); |
| free_stmt_vec_info (store); |
| unlink_stmt_vdef (store); |
| gsi_remove (&si, true); |
| release_defs (store); |
| } |
| |
| /* Stores can only appear at the end of pattern statements. */ |
| gcc_assert (!transform_pattern_stmt); |
| pattern_def_seq = NULL; |
| } |
| else if (!transform_pattern_stmt && gsi_end_p (pattern_def_si)) |
| { |
| pattern_def_seq = NULL; |
| gsi_next (&si); |
| } |
| } /* stmts in BB */ |
| } /* BBs in loop */ |
| |
| slpeel_make_loop_iterate_ntimes (loop, ratio); |
| |
| /* Reduce loop iterations by the vectorization factor. */ |
| scale_loop_profile (loop, GCOV_COMPUTE_SCALE (1, vectorization_factor), |
| expected_iterations / vectorization_factor); |
| loop->nb_iterations_upper_bound |
| = loop->nb_iterations_upper_bound.udiv (double_int::from_uhwi (vectorization_factor), |
| FLOOR_DIV_EXPR); |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) |
| && loop->nb_iterations_upper_bound != double_int_zero) |
| loop->nb_iterations_upper_bound = loop->nb_iterations_upper_bound - double_int_one; |
| if (loop->any_estimate) |
| { |
| loop->nb_iterations_estimate |
| = loop->nb_iterations_estimate.udiv (double_int::from_uhwi (vectorization_factor), |
| FLOOR_DIV_EXPR); |
| if (LOOP_VINFO_PEELING_FOR_GAPS (loop_vinfo) |
| && loop->nb_iterations_estimate != double_int_zero) |
| loop->nb_iterations_estimate = loop->nb_iterations_estimate - double_int_one; |
| } |
| |
| if (dump_enabled_p ()) |
| { |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "LOOP VECTORIZED\n"); |
| if (loop->inner) |
| dump_printf_loc (MSG_NOTE, vect_location, |
| "OUTER LOOP VECTORIZED\n"); |
| dump_printf (MSG_NOTE, "\n"); |
| } |
| } |