Google Git
Sign in
android / toolchain / gcc / donut / . / gcc-4.2.1 / gcc / fortran / gfortran.info
blob: 5dfb04562f3e01856865a3749ce6c92c1ed72aa5 [file] [log] [blame]
This is doc/gfortran.info, produced by makeinfo version 4.8 from
/scratch/mitchell/gcc-releases/gcc-4.2.1/gcc-4.2.1/gcc/fortran/gfortran.texi.
Copyright (C) 1999-2007 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "GNU General Public License" and "Funding Free
Software", the Front-Cover texts being (a) (see below), and with the
Back-Cover Texts being (b) (see below). A copy of the license is
included in the section entitled "GNU Free Documentation License".
(a) The FSF's Front-Cover Text is:
A GNU Manual
(b) The FSF's Back-Cover Text is:
You have freedom to copy and modify this GNU Manual, like GNU
software. Copies published by the Free Software Foundation raise
funds for GNU development.
INFO-DIR-SECTION Software development
START-INFO-DIR-ENTRY
* gfortran: (gfortran). The GNU Fortran Compiler.
END-INFO-DIR-ENTRY
This file documents the use and the internals of the GNU Fortran
compiler, (`gfortran').
Published by the Free Software Foundation 51 Franklin Street, Fifth
Floor Boston, MA 02110-1301 USA
Copyright (C) 1999-2007 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "GNU General Public License" and "Funding Free
Software", the Front-Cover texts being (a) (see below), and with the
Back-Cover Texts being (b) (see below). A copy of the license is
included in the section entitled "GNU Free Documentation License".
(a) The FSF's Front-Cover Text is:
A GNU Manual
(b) The FSF's Back-Cover Text is:
You have freedom to copy and modify this GNU Manual, like GNU
software. Copies published by the Free Software Foundation raise
funds for GNU development.

File: gfortran.info, Node: Top, Next: Introduction, Up: (dir)
Introduction
************
This manual documents the use of `gfortran', the GNU Fortran compiler.
You can find in this manual how to invoke `gfortran', as well as its
features and incompatibilities.
* Menu:
* Introduction::
Part I: Invoking GNU Fortran
* Invoking GNU Fortran:: Command options supported by `gfortran'.
* Runtime:: Influencing runtime behavior with environment variables.
Part II: Language Reference
* Fortran 2003 status:: Fortran 2003 features supported by GNU Fortran.
* Extensions:: Language extensions implemented by GNU Fortran.
* Intrinsic Procedures:: Intrinsic procedures supported by GNU Fortran.
* Contributing:: How you can help.
* Copying:: GNU General Public License says
how you can copy and share GNU Fortran.
* GNU Free Documentation License::
How you can copy and share this manual.
* Funding:: How to help assure continued work for free software.
* Option Index:: Index of command line options
* Keyword Index:: Index of concepts

File: gfortran.info, Node: Introduction, Next: Invoking GNU Fortran, Prev: Top, Up: Top
1 Introduction
**************
The GNU Fortran compiler front end was designed initially as a free
replacement for, or alternative to, the unix `f95' command; `gfortran'
is the command you'll use to invoke the compiler.
* Menu:
* About GNU Fortran:: What you should know about the GNU Fortran compiler.
* GNU Fortran and GCC:: You can compile Fortran, C, or other programs.
* GNU Fortran and G77:: Why we chose to start from scratch.
* Project Status:: Status of GNU Fortran, roadmap, proposed extensions.
* Standards:: Standards supported by GNU Fortran.

File: gfortran.info, Node: About GNU Fortran, Next: GNU Fortran and GCC, Up: Introduction
1.1 About GNU Fortran
=====================
The GNU Fortran compiler is still in an early state of development. It
can generate code for most constructs and expressions, but much work
remains to be done.
When the GNU Fortran compiler is finished, it will do everything you
expect from any decent compiler:
* Read a user's program, stored in a file and containing
instructions written in Fortran 77, Fortran 90, Fortran 95 or
Fortran 2003. This file contains "source code".
* Translate the user's program into instructions a computer can
carry out more quickly than it takes to translate the instructions
in the first place. The result after compilation of a program is
"machine code", code designed to be efficiently translated and
processed by a machine such as your computer. Humans usually
aren't as good writing machine code as they are at writing Fortran
(or C++, Ada, or Java), because is easy to make tiny mistakes
writing machine code.
* Provide the user with information about the reasons why the
compiler is unable to create a binary from the source code.
Usually this will be the case if the source code is flawed. When
writing Fortran, it is easy to make big mistakes. The Fortran 90
requires that the compiler can point out mistakes to the user. An
incorrect usage of the language causes an "error message".
The compiler will also attempt to diagnose cases where the user's
program contains a correct usage of the language, but instructs
the computer to do something questionable. This kind of
diagnostics message is called a "warning message".
* Provide optional information about the translation passes from the
source code to machine code. This can help a user of the compiler
to find the cause of certain bugs which may not be obvious in the
source code, but may be more easily found at a lower level
compiler output. It also helps developers to find bugs in the
compiler itself.
* Provide information in the generated machine code that can make it
easier to find bugs in the program (using a debugging tool, called
a "debugger", such as the GNU Debugger `gdb').
* Locate and gather machine code already generated to perform
actions requested by statements in the user's program. This
machine code is organized into "modules" and is located and
"linked" to the user program.
The GNU Fortran compiler consists of several components:
* A version of the `gcc' command (which also might be installed as
the system's `cc' command) that also understands and accepts
Fortran source code. The `gcc' command is the "driver" program for
all the languages in the GNU Compiler Collection (GCC); With `gcc',
you can compile the source code of any language for which a front
end is available in GCC.
* The `gfortran' command itself, which also might be installed as the
system's `f95' command. `gfortran' is just another driver program,
but specifically for the Fortran compiler only. The difference
with `gcc' is that `gfortran' will automatically link the correct
libraries to your program.
* A collection of run-time libraries. These libraries contain the
machine code needed to support capabilities of the Fortran
language that are not directly provided by the machine code
generated by the `gfortran' compilation phase, such as intrinsic
functions and subroutines, and routines for interaction with files
and the operating system.
* The Fortran compiler itself, (`f951'). This is the GNU Fortran
parser and code generator, linked to and interfaced with the GCC
backend library. `f951' "translates" the source code to assembler
code. You would typically not use this program directly; instead,
the `gcc' or `gfortran' driver programs will call it for you.

File: gfortran.info, Node: GNU Fortran and GCC, Next: GNU Fortran and G77, Prev: About GNU Fortran, Up: Introduction
1.2 GNU Fortran and GCC
=======================
GNU Fortran is a part of GCC, the "GNU Compiler Collection". GCC
consists of a collection of front ends for various languages, which
translate the source code into a language-independent form called
"GENERIC". This is then processed by a common middle end which
provides optimization, and then passed to one of a collection of back
ends which generate code for different computer architectures and
operating systems.
Functionally, this is implemented with a driver program (`gcc')
which provides the command-line interface for the compiler. It calls
the relevant compiler front-end program (e.g., `f951' for Fortran) for
each file in the source code, and then calls the assembler and linker
as appropriate to produce the compiled output. In a copy of GCC which
has been compiled with Fortran language support enabled, `gcc' will
recognize files with `.f', `.f90', `.f95', and `.f03' extensions as
Fortran source code, and compile it accordingly. A `gfortran' driver
program is also provided, which is identical to `gcc' except that it
automatically links the Fortran runtime libraries into the compiled
program.
This manual specifically documents the Fortran front end, which
handles the programming language's syntax and semantics. The aspects
of GCC which relate to the optimization passes and the back-end code
generation are documented in the GCC manual; see *Note Introduction:
(gcc)Top. The two manuals together provide a complete reference for
the GNU Fortran compiler.

File: gfortran.info, Node: GNU Fortran and G77, Next: Project Status, Prev: GNU Fortran and GCC, Up: Introduction
1.3 GNU Fortran and G77
=======================
The GNU Fortran compiler is the successor to `g77', the Fortran 77
front end included in GCC prior to version 4. It is an entirely new
program that has been designed to provide Fortran 95 support and
extensibility for future Fortran language standards, as well as
providing backwards compatibility for Fortran 77 and nearly all of the
GNU language extensions supported by `g77'.

File: gfortran.info, Node: Project Status, Next: Standards, Prev: GNU Fortran and G77, Up: Introduction
1.4 Project Status
==================
As soon as `gfortran' can parse all of the statements correctly,
it will be in the "larva" state. When we generate code, the
"puppa" state. When `gfortran' is done, we'll see if it will be a
beautiful butterfly, or just a big bug....
-Andy Vaught, April 2000
The start of the GNU Fortran 95 project was announced on the GCC
homepage in March 18, 2000 (even though Andy had already been working
on it for a while, of course).
The GNU Fortran compiler is able to compile nearly all
standard-compliant Fortran 95, Fortran 90, and Fortran 77 programs,
including a number of standard and non-standard extensions, and can be
used on real-world programs. In particular, the supported extensions
include OpenMP, Cray-style pointers, and several Fortran 2003 features
such as enumeration, stream I/O, and some of the enhancements to
allocatable array support from TR 15581. However, it is still under
development and has a few remaining rough edges.
At present, the GNU Fortran compiler passes the NIST Fortran 77 Test
Suite (http://www.fortran-2000.com/ArnaudRecipes/fcvs21_f95.html), and
produces acceptable results on the LAPACK Test Suite
(http://www.netlib.org/lapack/faq.html#1.21). It also provides
respectable performance on the Polyhedron Fortran compiler benchmarks
(http://www.polyhedron.com/pb05.html) and the Livermore Fortran Kernels
test
(http://www.llnl.gov/asci_benchmarks/asci/limited/lfk/README.html). It
has been used to compile a number of large real-world programs,
including the HIRLAM weather-forecasting code
(http://mysite.verizon.net/serveall/moene.pdf) and the Tonto quantum
chemistry package (http://www.theochem.uwa.edu.au/tonto/); see
`http://gcc.gnu.org/wiki/GfortranApps' for an extended list.
Among other things, the GNU Fortran compiler is intended as a
replacement for G77. At this point, nearly all programs that could be
compiled with G77 can be compiled with GNU Fortran, although there are
a few minor known regressions.
The primary work remaining to be done on GNU Fortran falls into three
categories: bug fixing (primarily regarding the treatment of invalid
code and providing useful error messages), improving the compiler
optimizations and the performance of compiled code, and extending the
compiler to support future standards--in particular, Fortran 2003.

File: gfortran.info, Node: Standards, Prev: Project Status, Up: Introduction
1.5 Standards
=============
The GNU Fortran compiler implements ISO/IEC 1539:1997 (Fortran 95). As
such, it can also compile essentially all standard-compliant Fortran 90
and Fortran 77 programs. It also supports the ISO/IEC TR-15581
enhancements to allocatable arrays, and the OpenMP Application Program
Interface v2.5 (http://www.openmp.org/drupal/mp-documents/spec25.pdf)
specification.
In the future, the GNU Fortran compiler may also support other
standard variants of and extensions to the Fortran language. These
include ISO/IEC 1539-1:2004 (Fortran 2003).

File: gfortran.info, Node: Invoking GNU Fortran, Next: Runtime, Prev: Introduction, Up: Top
2 GNU Fortran Command Options
*****************************
The `gfortran' command supports all the options supported by the `gcc'
command. Only options specific to GNU Fortran are documented here.
*Note GCC Command Options: (gcc)Invoking GCC, for information on the
non-Fortran-specific aspects of the `gcc' command (and, therefore, the
`gfortran' command).
All GCC and GNU Fortran options are accepted both by `gfortran' and
by `gcc' (as well as any other drivers built at the same time, such as
`g++'), since adding GNU Fortran to the GCC distribution enables
acceptance of GNU Fortran options by all of the relevant drivers.
In some cases, options have positive and negative forms; the
negative form of `-ffoo' would be `-fno-foo'. This manual documents
only one of these two forms, whichever one is not the default.
* Menu:
* Option Summary:: Brief list of all `gfortran' options,
without explanations.
* Fortran Dialect Options:: Controlling the variant of Fortran language
compiled.
* Error and Warning Options:: How picky should the compiler be?
* Debugging Options:: Symbol tables, measurements, and debugging dumps.
* Directory Options:: Where to find module files
* Runtime Options:: Influencing runtime behavior
* Code Gen Options:: Specifying conventions for function calls, data layout
and register usage.
* Environment Variables:: Env vars that affect `gfortran'.

File: gfortran.info, Node: Option Summary, Next: Fortran Dialect Options, Up: Invoking GNU Fortran
2.1 Option Summary
==================
Here is a summary of all the options specific to GNU Fortran, grouped
by type. Explanations are in the following sections.
_Fortran Language Options_
*Note Options Controlling Fortran Dialect: Fortran Dialect Options.
-fall-intrinsics -ffree-form -fno-fixed-form
-fdollar-ok -fimplicit-none -fmax-identifier-length
-std=STD -fd-lines-as-code -fd-lines-as-comments
-ffixed-line-length-N -ffixed-line-length-none
-ffree-line-length-N -ffree-line-length-none
-fdefault-double-8 -fdefault-integer-8 -fdefault-real-8
-fcray-pointer -fopenmp -frange-check -fno-backslash
_Error and Warning Options_
*Note Options to Request or Suppress Errors and Warnings: Error
and Warning Options.
-fmax-errors=N
-fsyntax-only -pedantic -pedantic-errors
-w -Wall -Waliasing -Wampersand -Wcharacter-truncation -Wconversion
-Wimplicit-interface -Wline-truncation -Wnonstd-intrinsics -Wsurprising
-Wno-tabs -Wunderflow -W
_Debugging Options_
*Note Options for Debugging Your Program or GCC: Debugging Options.
-fdump-parse-tree -ffpe-trap=LIST
_Directory Options_
*Note Options for Directory Search: Directory Options.
-IDIR -JDIR -MDIR
_Runtime Options_
*Note Options for influencing runtime behavior: Runtime Options.
-fconvert=CONVERSION -frecord-marker=LENGTH
-fmax-subrecord-length=LENGTH
_Code Generation Options_
*Note Options for Code Generation Conventions: Code Gen Options.
-fno-automatic -ff2c -fno-underscoring
-fsecond-underscore
-fbounds-check -fmax-stack-var-size=N
-fpack-derived -frepack-arrays -fshort-enums
* Menu:
* Fortran Dialect Options:: Controlling the variant of Fortran language
compiled.
* Error and Warning Options:: How picky should the compiler be?
* Debugging Options:: Symbol tables, measurements, and debugging dumps.
* Directory Options:: Where to find module files
* Runtime Options:: Influencing runtime behavior
* Code Gen Options:: Specifying conventions for function calls, data layout
and register usage.

File: gfortran.info, Node: Fortran Dialect Options, Next: Error and Warning Options, Prev: Option Summary, Up: Invoking GNU Fortran
2.2 Options Controlling Fortran Dialect
=======================================
The following options control the details of the Fortran dialect
accepted by the compiler:
`-ffree-form'
`-ffixed-form'
Specify the layout used by the source file. The free form layout
was introduced in Fortran 90. Fixed form was traditionally used in
older Fortran programs. When neither option is specified, the
source form is determined by the file extension.
`-fall-intrinsics'
Accept all of the intrinsic procedures provided in libgfortran
without regard to the setting of `-std'. In particular, this
option can be quite useful with `-std=f95'. Additionally,
`gfortran' will ignore `-Wnonstd-intrinsics'.
`-fd-lines-as-code'
`-fd-lines-as-comments'
Enable special treatment for lines beginning with `d' or `D' in
fixed form sources. If the `-fd-lines-as-code' option is given
they are treated as if the first column contained a blank. If the
`-fd-lines-as-comments' option is given, they are treated as
comment lines.
`-fdefault-double-8'
Set the `DOUBLE PRECISION' type to an 8 byte wide type.
`-fdefault-integer-8'
Set the default integer and logical types to an 8 byte wide type.
Do nothing if this is already the default.
`-fdefault-real-8'
Set the default real type to an 8 byte wide type. Do nothing if
this is already the default.
`-fdollar-ok'
Allow `$' as a valid character in a symbol name.
`-fno-backslash'
Change the interpretation of backslashes in string literals from
"C-style" escape characters to a single backslash character.
`-ffixed-line-length-N'
Set column after which characters are ignored in typical fixed-form
lines in the source file, and through which spaces are assumed (as
if padded to that length) after the ends of short fixed-form lines.
Popular values for N include 72 (the standard and the default), 80
(card image), and 132 (corresponding to "extended-source" options
in some popular compilers). N may also be `none', meaning that
the entire line is meaningful and that continued character
constants never have implicit spaces appended to them to fill out
the line. `-ffixed-line-length-0' means the same thing as
`-ffixed-line-length-none'.
`-ffree-line-length-N'
Set column after which characters are ignored in typical free-form
lines in the source file. The default value is 132. N may be
`none', meaning that the entire line is meaningful.
`-ffree-line-length-0' means the same thing as
`-ffree-line-length-none'.
`-fmax-identifier-length=N'
Specify the maximum allowed identifier length. Typical values are
31 (Fortran 95) and 63 (Fortran 2003).
`-fimplicit-none'
Specify that no implicit typing is allowed, unless overridden by
explicit `IMPLICIT' statements. This is the equivalent of adding
`implicit none' to the start of every procedure.
`-fcray-pointer'
Enable the Cray pointer extension, which provides C-like pointer
functionality.
`-fopenmp'
Enable the OpenMP extensions. This includes OpenMP `!$omp'
directives in free form and `c$omp', `*$omp' and `!$omp'
directives in fixed form, `!$' conditional compilation sentinels
in free form and `c$', `*$' and `!$' sentinels in fixed form, and
when linking arranges for the OpenMP runtime library to be linked
in.
`-frange-check'
Enable range checking on results of simplification of constant
expressions during compilation. For example, by default, GNU
Fortran will give an overflow error at compile time when
simplifying `a = EXP(1000)'. With `-fno-range-check', no error
will be given and the variable `a' will be assigned the value
`+Infinity'. Similarly, `DATA i/Z'FFFFFFFF'/' will result in an
integer overflow on most systems, but with `-fno-range-check' the
value will "wrap around" and `i' will be initialized to -1 instead.
`-std=STD'
Specify the standard to which the program is expected to conform,
which may be one of `f95', `f2003', `gnu', or `legacy'. The
default value for STD is `gnu', which specifies a superset of the
Fortran 95 standard that includes all of the extensions supported
by GNU Fortran, although warnings will be given for obsolete
extensions not recommended for use in new code. The `legacy' value
is equivalent but without the warnings for obsolete extensions,
and may be useful for old non-standard programs. The `f95' and
`f2003' values specify strict conformance to the Fortran 95 and
Fortran 2003 standards, respectively; errors are given for all
extensions beyond the relevant language standard, and warnings are
given for the Fortran 77 features that are permitted but
obsolescent in later standards.

File: gfortran.info, Node: Error and Warning Options, Next: Debugging Options, Prev: Fortran Dialect Options, Up: Invoking GNU Fortran
2.3 Options to Request or Suppress Errors and Warnings
======================================================
Errors are diagnostic messages that report that the GNU Fortran compiler
cannot compile the relevant piece of source code. The compiler will
continue to process the program in an attempt to report further errors
to aid in debugging, but will not produce any compiled output.
Warnings are diagnostic messages that report constructions which are
not inherently erroneous but which are risky or suggest there is likely
to be a bug in the program. Unless `-Werror' is specified, they do not
prevent compilation of the program.
You can request many specific warnings with options beginning `-W',
for example `-Wimplicit' to request warnings on implicit declarations.
Each of these specific warning options also has a negative form
beginning `-Wno-' to turn off warnings; for example, `-Wno-implicit'.
This manual lists only one of the two forms, whichever is not the
default.
These options control the amount and kinds of errors and warnings
produced by GNU Fortran:
`-fmax-errors-N'
Limits the maximum number of error messages to N, at which point
GNU Fortran bails out rather than attempting to continue
processing the source code. If N is 0, there is no limit on the
number of error messages produced.
`-fsyntax-only'
Check the code for syntax errors, but don't do anything beyond
that.
`-pedantic'
Issue warnings for uses of extensions to Fortran 95. `-pedantic'
also applies to C-language constructs where they occur in GNU
Fortran source files, such as use of `\e' in a character constant
within a directive like `#include'.
Valid Fortran 95 programs should compile properly with or without
this option. However, without this option, certain GNU extensions
and traditional Fortran features are supported as well. With this
option, many of them are rejected.
Some users try to use `-pedantic' to check programs for
conformance. They soon find that it does not do quite what they
want--it finds some nonstandard practices, but not all. However,
improvements to GNU Fortran in this area are welcome.
This should be used in conjunction with `-std=f95' or `-std=f2003'.
`-pedantic-errors'
Like `-pedantic', except that errors are produced rather than
warnings.
`-w'
Inhibit all warning messages.
`-Wall'
Enables commonly used warning options pertaining to usage that we
recommend avoiding and that we believe are easy to avoid. This
currently includes `-Waliasing', `-Wampersand', `-Wsurprising',
`-Wnonstd-intrinsics', `-Wno-tabs', and `-Wline-truncation'.
`-Waliasing'
Warn about possible aliasing of dummy arguments. Specifically, it
warns if the same actual argument is associated with a dummy
argument with `INTENT(IN)' and a dummy argument with `INTENT(OUT)'
in a call with an explicit interface.
The following example will trigger the warning.
interface
subroutine bar(a,b)
integer, intent(in) :: a
integer, intent(out) :: b
end subroutine
end interface
integer :: a
call bar(a,a)
`-Wampersand'
Warn about missing ampersand in continued character constants. The
warning is given with `-Wampersand', `-pedantic', `-std=f95', and
`-std=f2003'. Note: With no ampersand given in a continued
character constant, GNU Fortran assumes continuation at the first
non-comment, non-whitespace character after the ampersand that
initiated the continuation.
`-Wcharacter-truncation'
Warn when a character assignment will truncate the assigned string.
`-Wconversion'
Warn about implicit conversions between different types.
`-Wimplicit-interface'
Warn if a procedure is called without an explicit interface. Note
this only checks that an explicit interface is present. It does
not check that the declared interfaces are consistent across
program units.
`-Wnonstd-intrinsics'
Warn if the user tries to use an intrinsic that does not belong to
the standard the user has chosen via the `-std' option.
`-Wsurprising'
Produce a warning when "suspicious" code constructs are
encountered. While technically legal these usually indicate that
an error has been made.
This currently produces a warning under the following
circumstances:
* An INTEGER SELECT construct has a CASE that can never be
matched as its lower value is greater than its upper value.
* A LOGICAL SELECT construct has three CASE statements.
`-Wtabs'
By default, tabs are accepted as whitespace, but tabs are not
members of the Fortran Character Set. `-Wno-tabs' will cause a
warning to be issued if a tab is encountered. Note, `-Wno-tabs' is
active for `-pedantic', `-std=f95', `-std=f2003', and `-Wall'.
`-Wunderflow'
Produce a warning when numerical constant expressions are
encountered, which yield an UNDERFLOW during compilation.
`-Werror'
Turns all warnings into errors.
`-W'
Turns on "extra warnings" and, if optimization is specified via
`-O', the `-Wuninitialized' option. (This might change in future
versions of GNU Fortran.)
*Note Options to Request or Suppress Errors and Warnings: (gcc)Error
and Warning Options, for information on more options offered by the GBE
shared by `gfortran', `gcc' and other GNU compilers.
Some of these have no effect when compiling programs written in
Fortran.

File: gfortran.info, Node: Debugging Options, Next: Directory Options, Prev: Error and Warning Options, Up: Invoking GNU Fortran
2.4 Options for Debugging Your Program or GNU Fortran
=====================================================
GNU Fortran has various special options that are used for debugging
either your program or the GNU Fortran compiler.
`-fdump-parse-tree'
Output the internal parse tree before starting code generation.
Only really useful for debugging the GNU Fortran compiler itself.
`-ffpe-trap=LIST'
Specify a list of IEEE exceptions when a Floating Point Exception
(FPE) should be raised. On most systems, this will result in a
SIGFPE signal being sent and the program being interrupted,
producing a core file useful for debugging. LIST is a (possibly
empty) comma-separated list of the following IEEE exceptions:
`invalid' (invalid floating point operation, such as
`SQRT(-1.0)'), `zero' (division by zero), `overflow' (overflow in
a floating point operation), `underflow' (underflow in a floating
point operation), `precision' (loss of precision during operation)
and `denormal' (operation produced a denormal value).
*Note Options for Debugging Your Program or GCC: (gcc)Debugging
Options, for more information on debugging options.

File: gfortran.info, Node: Directory Options, Next: Runtime Options, Prev: Debugging Options, Up: Invoking GNU Fortran
2.5 Options for Directory Search
================================
These options affect how GNU Fortran searches for files specified by
the `INCLUDE' directive and where it searches for previously compiled
modules.
It also affects the search paths used by `cpp' when used to
preprocess Fortran source.
`-IDIR'
These affect interpretation of the `INCLUDE' directive (as well as
of the `#include' directive of the `cpp' preprocessor).
Also note that the general behavior of `-I' and `INCLUDE' is
pretty much the same as of `-I' with `#include' in the `cpp'
preprocessor, with regard to looking for `header.gcc' files and
other such things.
This path is also used to search for `.mod' files when previously
compiled modules are required by a `USE' statement.
*Note Options for Directory Search: (gcc)Directory Options, for
information on the `-I' option.
`-MDIR'
`-JDIR'
This option specifies where to put `.mod' files for compiled
modules. It is also added to the list of directories to searched
by an `USE' statement.
The default is the current directory.
`-J' is an alias for `-M' to avoid conflicts with existing GCC
options.

File: gfortran.info, Node: Runtime Options, Next: Code Gen Options, Prev: Directory Options, Up: Invoking GNU Fortran
2.6 Influencing runtime behavior
================================
These options affect the runtime behavior of programs compiled with GNU
Fortran.
`-fconvert=CONVERSION'
Specify the representation of data for unformatted files. Valid
values for conversion are: `native', the default; `swap', swap
between big- and little-endian; `big-endian', use big-endian
representation for unformatted files; `little-endian', use
little-endian representation for unformatted files.
_This option has an effect only when used in the main program.
The `CONVERT' specifier and the GFORTRAN_CONVERT_UNIT environment
variable override the default specified by `-fconvert'._
`-frecord-marker=LENGTH'
Specify the length of record markers for unformatted files. Valid
values for LENGTH are 4 and 8. Default is 4. _This is different
from previous versions of gfortran_, which specified a default
record marker length of 8 on most systems. If you want to read or
write files compatible with earlier versions of gfortran, use
`-frecord-marker=8'.
`-fmax-subrecord-length=LENGTH'
Specify the maximum length for a subrecord. The maximum permitted
value for length is 2147483639, which is also the default. Only
really useful for use by the gfortran testsuite.

File: gfortran.info, Node: Code Gen Options, Next: Environment Variables, Prev: Runtime Options, Up: Invoking GNU Fortran
2.7 Options for Code Generation Conventions
===========================================
These machine-independent options control the interface conventions
used in code generation.
Most of them have both positive and negative forms; the negative form
of `-ffoo' would be `-fno-foo'. In the table below, only one of the
forms is listed--the one which is not the default. You can figure out
the other form by either removing `no-' or adding it.
`-fno-automatic'
Treat each program unit as if the `SAVE' statement was specified
for every local variable and array referenced in it. Does not
affect common blocks. (Some Fortran compilers provide this option
under the name `-static'.)
`-ff2c'
Generate code designed to be compatible with code generated by
`g77' and `f2c'.
The calling conventions used by `g77' (originally implemented in
`f2c') require functions that return type default `REAL' to
actually return the C type `double', and functions that return
type `COMPLEX' to return the values via an extra argument in the
calling sequence that points to where to store the return value.
Under the default GNU calling conventions, such functions simply
return their results as they would in GNU C--default `REAL'
functions return the C type `float', and `COMPLEX' functions
return the GNU C type `complex'. Additionally, this option
implies the `-fsecond-underscore' option, unless
`-fno-second-underscore' is explicitly requested.
This does not affect the generation of code that interfaces with
the `libgfortran' library.
_Caution:_ It is not a good idea to mix Fortran code compiled with
`-ff2c' with code compiled with the default `-fno-f2c' calling
conventions as, calling `COMPLEX' or default `REAL' functions
between program parts which were compiled with different calling
conventions will break at execution time.
_Caution:_ This will break code which passes intrinsic functions
of type default `REAL' or `COMPLEX' as actual arguments, as the
library implementations use the `-fno-f2c' calling conventions.
`-fno-underscoring'
Do not transform names of entities specified in the Fortran source
file by appending underscores to them.
With `-funderscoring' in effect, GNU Fortran appends one
underscore to external names with no underscores. This is done to
ensure compatibility with code produced by many UNIX Fortran
compilers.
_Caution_: The default behavior of GNU Fortran is incompatible
with `f2c' and `g77', please use the `-ff2c' option if you want
object files compiled with GNU Fortran to be compatible with
object code created with these tools.
Use of `-fno-underscoring' is not recommended unless you are
experimenting with issues such as integration of GNU Fortran into
existing system environments (vis-a-vis existing libraries, tools,
and so on).
For example, with `-funderscoring', and assuming other defaults
like `-fcase-lower' and that `j()' and `max_count()' are external
functions while `my_var' and `lvar' are local variables, a
statement like
I = J() + MAX_COUNT (MY_VAR, LVAR)
is implemented as something akin to:
i = j_() + max_count__(&my_var__, &lvar);
With `-fno-underscoring', the same statement is implemented as:
i = j() + max_count(&my_var, &lvar);
Use of `-fno-underscoring' allows direct specification of
user-defined names while debugging and when interfacing GNU Fortran
code with other languages.
Note that just because the names match does _not_ mean that the
interface implemented by GNU Fortran for an external name matches
the interface implemented by some other language for that same
name. That is, getting code produced by GNU Fortran to link to
code produced by some other compiler using this or any other
method can be only a small part of the overall solution--getting
the code generated by both compilers to agree on issues other than
naming can require significant effort, and, unlike naming
disagreements, linkers normally cannot detect disagreements in
these other areas.
Also, note that with `-fno-underscoring', the lack of appended
underscores introduces the very real possibility that a
user-defined external name will conflict with a name in a system
library, which could make finding unresolved-reference bugs quite
difficult in some cases--they might occur at program run time, and
show up only as buggy behavior at run time.
In future versions of GNU Fortran we hope to improve naming and
linking issues so that debugging always involves using the names
as they appear in the source, even if the names as seen by the
linker are mangled to prevent accidental linking between
procedures with incompatible interfaces.
`-fsecond-underscore'
By default, GNU Fortran appends an underscore to external names.
If this option is used GNU Fortran appends two underscores to
names with underscores and one underscore to external names with
no underscores. GNU Fortran also appends two underscores to
internal names with underscores to avoid naming collisions with
external names.
This option has no effect if `-fno-underscoring' is in effect. It
is implied by the `-ff2c' option.
Otherwise, with this option, an external name such as `MAX_COUNT'
is implemented as a reference to the link-time external symbol
`max_count__', instead of `max_count_'. This is required for
compatibility with `g77' and `f2c', and is implied by use of the
`-ff2c' option.
`-fbounds-check'
Enable generation of run-time checks for array subscripts and
against the declared minimum and maximum values. It also checks
array indices for assumed and deferred shape arrays against the
actual allocated bounds.
In the future this may also include other forms of checking, e.g.,
checking substring references.
`-fmax-stack-var-size=N'
This option specifies the size in bytes of the largest array that
will be put on the stack.
This option currently only affects local arrays declared with
constant bounds, and may not apply to all character variables.
Future versions of GNU Fortran may improve this behavior.
The default value for N is 32768.
`-fpack-derived'
This option tells GNU Fortran to pack derived type members as
closely as possible. Code compiled with this option is likely to
be incompatible with code compiled without this option, and may
execute slower.
`-frepack-arrays'
In some circumstances GNU Fortran may pass assumed shape array
sections via a descriptor describing a noncontiguous area of
memory. This option adds code to the function prologue to repack
the data into a contiguous block at runtime.
This should result in faster accesses to the array. However it
can introduce significant overhead to the function call,
especially when the passed data is noncontiguous.
`-fshort-enums'
This option is provided for interoperability with C code that was
compiled with the `-fshort-enums' option. It will make GNU
Fortran choose the smallest `INTEGER' kind a given enumerator set
will fit in, and give all its enumerators this kind.
*Note Options for Code Generation Conventions: (gcc)Code Gen
Options, for information on more options offered by the GBE shared by
`gfortran', `gcc', and other GNU compilers.

File: gfortran.info, Node: Environment Variables, Prev: Code Gen Options, Up: Invoking GNU Fortran
2.8 Environment Variables Affecting `gfortran'
==============================================
The `gfortran' compiler currently does not make use of any environment
variables to control its operation above and beyond those that affect
the operation of `gcc'.
*Note Environment Variables Affecting GCC: (gcc)Environment
Variables, for information on environment variables.
*Note Runtime::, for environment variables that affect the run-time
behavior of programs compiled with GNU Fortran.

File: gfortran.info, Node: Runtime, Next: Fortran 2003 status, Prev: Invoking GNU Fortran, Up: Top
3 Runtime: Influencing runtime behavior with environment variables
*******************************************************************
The behavior of the `gfortran' can be influenced by environment
variables.
Malformed environment variables are silently ignored.
* Menu:
* GFORTRAN_STDIN_UNIT:: Unit number for standard input
* GFORTRAN_STDOUT_UNIT:: Unit number for standard output
* GFORTRAN_STDERR_UNIT:: Unit number for standard error
* GFORTRAN_USE_STDERR:: Send library output to standard error
* GFORTRAN_TMPDIR:: Directory for scratch files
* GFORTRAN_UNBUFFERED_ALL:: Don't buffer output
* GFORTRAN_SHOW_LOCUS:: Show location for runtime errors
* GFORTRAN_OPTIONAL_PLUS:: Print leading + where permitted
* GFORTRAN_DEFAULT_RECL:: Default record length for new files
* GFORTRAN_LIST_SEPARATOR:: Separator for list output
* GFORTRAN_CONVERT_UNIT:: Set endianness for unformatted I/O

File: gfortran.info, Node: GFORTRAN_STDIN_UNIT, Next: GFORTRAN_STDOUT_UNIT, Up: Runtime
3.1 `GFORTRAN_STDIN_UNIT'--Unit number for standard input
=========================================================
This environment variable can be used to select the unit number
preconnected to standard input. This must be a positive integer. The
default value is 5.

File: gfortran.info, Node: GFORTRAN_STDOUT_UNIT, Next: GFORTRAN_STDERR_UNIT, Prev: GFORTRAN_STDIN_UNIT, Up: Runtime
3.2 `GFORTRAN_STDOUT_UNIT'--Unit number for standard output
===========================================================
This environment variable can be used to select the unit number
preconnected to standard output. This must be a positive integer. The
default value is 6.

File: gfortran.info, Node: GFORTRAN_STDERR_UNIT, Next: GFORTRAN_USE_STDERR, Prev: GFORTRAN_STDOUT_UNIT, Up: Runtime
3.3 `GFORTRAN_STDERR_UNIT'--Unit number for standard error
==========================================================
This environment variable can be used to select the unit number
preconnected to standard error. This must be a positive integer. The
default value is 0.

File: gfortran.info, Node: GFORTRAN_USE_STDERR, Next: GFORTRAN_TMPDIR, Prev: GFORTRAN_STDERR_UNIT, Up: Runtime
3.4 `GFORTRAN_USE_STDERR'--Send library output to standard error
================================================================
This environment variable controls where library output is sent. If
the first letter is `y', `Y' or `1', standard error is used. If the
first letter is `n', `N' or `0', standard output is used.

File: gfortran.info, Node: GFORTRAN_TMPDIR, Next: GFORTRAN_UNBUFFERED_ALL, Prev: GFORTRAN_USE_STDERR, Up: Runtime
3.5 `GFORTRAN_TMPDIR'--Directory for scratch files
==================================================
This environment variable controls where scratch files are created. If
this environment variable is missing, GNU Fortran searches for the
environment variable `TMP'. If this is also missing, the default is
`/tmp'.

File: gfortran.info, Node: GFORTRAN_UNBUFFERED_ALL, Next: GFORTRAN_SHOW_LOCUS, Prev: GFORTRAN_TMPDIR, Up: Runtime
3.6 `GFORTRAN_UNBUFFERED_ALL'--Don't buffer output
==================================================
This environment variable controls whether all output is unbuffered.
If the first letter is `y', `Y' or `1', all output is unbuffered. This
will slow down large writes. If the first letter is `n', `N' or `0',
output is buffered. This is the default.

File: gfortran.info, Node: GFORTRAN_SHOW_LOCUS, Next: GFORTRAN_OPTIONAL_PLUS, Prev: GFORTRAN_UNBUFFERED_ALL, Up: Runtime
3.7 `GFORTRAN_SHOW_LOCUS'--Show location for runtime errors
===========================================================
If the first letter is `y', `Y' or `1', filename and line numbers for
runtime errors are printed. If the first letter is `n', `N' or `0',
don't print filename and line numbers for runtime errors. The default
is to print the location.

File: gfortran.info, Node: GFORTRAN_OPTIONAL_PLUS, Next: GFORTRAN_DEFAULT_RECL, Prev: GFORTRAN_SHOW_LOCUS, Up: Runtime
3.8 `GFORTRAN_OPTIONAL_PLUS'--Print leading + where permitted
=============================================================
If the first letter is `y', `Y' or `1', a plus sign is printed where
permitted by the Fortran standard. If the first letter is `n', `N' or
`0', a plus sign is not printed in most cases. Default is not to print
plus signs.

File: gfortran.info, Node: GFORTRAN_DEFAULT_RECL, Next: GFORTRAN_LIST_SEPARATOR, Prev: GFORTRAN_OPTIONAL_PLUS, Up: Runtime
3.9 `GFORTRAN_DEFAULT_RECL'--Default record length for new files
================================================================
This environment variable specifies the default record length, in
bytes, for files which are opened without a `RECL' tag in the `OPEN'
statement. This must be a positive integer. The default value is
1073741824 bytes (1 GB).

File: gfortran.info, Node: GFORTRAN_LIST_SEPARATOR, Next: GFORTRAN_CONVERT_UNIT, Prev: GFORTRAN_DEFAULT_RECL, Up: Runtime
3.10 `GFORTRAN_LIST_SEPARATOR'--Separator for list output
=========================================================
This environment variable specifies the separator when writing
list-directed output. It may contain any number of spaces and at most
one comma. If you specify this on the command line, be sure to quote
spaces, as in
$ GFORTRAN_LIST_SEPARATOR=' , ' ./a.out
when `a.out' is the compiled Fortran program that you want to run.
Default is a single space.

File: gfortran.info, Node: GFORTRAN_CONVERT_UNIT, Prev: GFORTRAN_LIST_SEPARATOR, Up: Runtime
3.11 `GFORTRAN_CONVERT_UNIT'--Set endianness for unformatted I/O
================================================================
By setting the `GFORTRAN_CONVERT_UNIT' variable, it is possible to
change the representation of data for unformatted files. The syntax
for the `GFORTRAN_CONVERT_UNIT' variable is:
GFORTRAN_CONVERT_UNIT: mode | mode ';' exception | exception ;
mode: 'native' | 'swap' | 'big_endian' | 'little_endian' ;
exception: mode ':' unit_list | unit_list ;
unit_list: unit_spec | unit_list unit_spec ;
unit_spec: INTEGER | INTEGER '-' INTEGER ;
The variable consists of an optional default mode, followed by a
list of optional exceptions, which are separated by semicolons from the
preceding default and each other. Each exception consists of a format
and a comma-separated list of units. Valid values for the modes are
the same as for the `CONVERT' specifier:
`NATIVE' Use the native format. This is the default.
`SWAP' Swap between little- and big-endian.
`LITTLE_ENDIAN' Use the little-endian format for
unformatted files.
`BIG_ENDIAN' Use the big-endian format for unformatted files.
A missing mode for an exception is taken to mean `BIG_ENDIAN'.
Examples of values for `GFORTRAN_CONVERT_UNIT' are:
`'big_endian'' Do all unformatted I/O in big_endian mode.
`'little_endian;native:10-20,25'' Do all unformatted I/O in
little_endian mode, except for units 10 to 20 and 25, which are in
native format.
`'10-20'' Units 10 to 20 are big-endian, the rest is native.
Setting the environment variables should be done on the command line
or via the `export' command for `sh'-compatible shells and via `setenv'
for `csh'-compatible shells.
Example for `sh':
$ gfortran foo.f90
$ GFORTRAN_CONVERT_UNIT='big_endian;native:10-20' ./a.out
Example code for `csh':
% gfortran foo.f90
% setenv GFORTRAN_CONVERT_UNIT 'big_endian;native:10-20'
% ./a.out
Using anything but the native representation for unformatted data
carries a significant speed overhead. If speed in this area matters to
you, it is best if you use this only for data that needs to be portable.
*Note CONVERT specifier::, for an alternative way to specify the
data representation for unformatted files. *Note Runtime Options::, for
setting a default data representation for the whole program. The
`CONVERT' specifier overrides the `-fconvert' compile options.
_Note that the values specified via the GFORTRAN_CONVERT_UNIT
environment variable will override the CONVERT specifier in the open
statement_. This is to give control over data formats to users who do
not have the source code of their program available.

File: gfortran.info, Node: Fortran 2003 status, Next: Extensions, Prev: Runtime, Up: Top
4 Fortran 2003 Status
*********************
Although GNU Fortran focuses on implementing the Fortran 95 standard
for the time being, a few Fortran 2003 features are currently available.
* Intrinsics `command_argument_count', `get_command',
`get_command_argument', `get_environment_variable', and
`move_alloc'.
* Array constructors using square brackets. That is, `[...]' rather
than `(/.../)'.
* `FLUSH' statement.
* `IOMSG=' specifier for I/O statements.
* Support for the declaration of enumeration constants via the
`ENUM' and `ENUMERATOR' statements. Interoperability with `gcc'
is guaranteed also for the case where the `-fshort-enums' command
line option is given.
* TR 15581:
* `ALLOCATABLE' dummy arguments.
* `ALLOCATABLE' function results
* `ALLOCATABLE' components of derived types
* The `OPEN' statement supports the `ACCESS='STREAM'' specifier,
allowing I/O without any record structure.

File: gfortran.info, Node: Extensions, Next: Intrinsic Procedures, Prev: Fortran 2003 status, Up: Top
5 Extensions
************
GNU Fortran implements a number of extensions over standard Fortran.
This chapter contains information on their syntax and meaning. There
are currently two categories of GNU Fortran extensions, those that
provide functionality beyond that provided by any standard, and those
that are supported by GNU Fortran purely for backward compatibility
with legacy compilers. By default, `-std=gnu' allows the compiler to
accept both types of extensions, but to warn about the use of the
latter. Specifying either `-std=f95' or `-std=f2003' disables both
types of extensions, and `-std=legacy' allows both without warning.
* Menu:
* Old-style kind specifications::
* Old-style variable initialization::
* Extensions to namelist::
* X format descriptor without count field::
* Commas in FORMAT specifications::
* Missing period in FORMAT specifications::
* I/O item lists::
* BOZ literal constants::
* Real array indices::
* Unary operators::
* Implicitly convert LOGICAL and INTEGER values::
* Hollerith constants support::
* Cray pointers::
* CONVERT specifier::
* OpenMP::

File: gfortran.info, Node: Old-style kind specifications, Next: Old-style variable initialization, Up: Extensions
5.1 Old-style kind specifications
=================================
GNU Fortran allows old-style kind specifications in declarations. These
look like:
TYPESPEC*size x,y,z
where `TYPESPEC' is a basic type (`INTEGER', `REAL', etc.), and
where `size' is a byte count corresponding to the storage size of a
valid kind for that type. (For `COMPLEX' variables, `size' is the
total size of the real and imaginary parts.) The statement then
declares `x', `y' and `z' to be of type `TYPESPEC' with the appropriate
kind. This is equivalent to the standard-conforming declaration
TYPESPEC(k) x,y,z
where `k' is equal to `size' for most types, but is equal to
`size/2' for the `COMPLEX' type.

File: gfortran.info, Node: Old-style variable initialization, Next: Extensions to namelist, Prev: Old-style kind specifications, Up: Extensions
5.2 Old-style variable initialization
=====================================
GNU Fortran allows old-style initialization of variables of the form:
INTEGER i/1/,j/2/
REAL x(2,2) /3*0.,1./
The syntax for the initializers is as for the `DATA' statement, but
unlike in a `DATA' statement, an initializer only applies to the
variable immediately preceding the initialization. In other words,
something like `INTEGER I,J/2,3/' is not valid. This style of
initialization is only allowed in declarations without double colons
(`::'); the double colons were introduced in Fortran 90, which also
introduced a standard syntax for initializing variables in type
declarations.
Examples of standard-conforming code equivalent to the above example
are:
! Fortran 90
INTEGER :: i = 1, j = 2
REAL :: x(2,2) = RESHAPE((/0.,0.,0.,1./),SHAPE(x))
! Fortran 77
INTEGER i, j
REAL x(2,2)
DATA i/1/, j/2/, x/3*0.,1./
Note that variables which are explicitly initialized in declarations
or in `DATA' statements automatically acquire the `SAVE' attribute.

File: gfortran.info, Node: Extensions to namelist, Next: X format descriptor without count field, Prev: Old-style variable initialization, Up: Extensions
5.3 Extensions to namelist
==========================
GNU Fortran fully supports the Fortran 95 standard for namelist I/O
including array qualifiers, substrings and fully qualified derived
types. The output from a namelist write is compatible with namelist
read. The output has all names in upper case and indentation to column
1 after the namelist name. Two extensions are permitted:
Old-style use of `$' instead of `&'
$MYNML
X(:)%Y(2) = 1.0 2.0 3.0
CH(1:4) = "abcd"
$END
It should be noted that the default terminator is `/' rather than
`&END'.
Querying of the namelist when inputting from stdin. After at least
one space, entering `?' sends to stdout the namelist name and the names
of the variables in the namelist:
?
&mynml
x
x%y
ch
&end
Entering `=?' outputs the namelist to stdout, as if `WRITE(*,NML =
mynml)' had been called:
=?
&MYNML
X(1)%Y= 0.000000 , 1.000000 , 0.000000 ,
X(2)%Y= 0.000000 , 2.000000 , 0.000000 ,
X(3)%Y= 0.000000 , 3.000000 , 0.000000 ,
CH=abcd, /
To aid this dialog, when input is from stdin, errors send their
messages to stderr and execution continues, even if `IOSTAT' is set.
`PRINT' namelist is permitted. This causes an error if `-std=f95'
is used.
PROGRAM test_print
REAL, dimension (4) :: x = (/1.0, 2.0, 3.0, 4.0/)
NAMELIST /mynml/ x
PRINT mynml
END PROGRAM test_print
Expanded namelist reads are permitted. This causes an error if
`-std=f95' is used. In the following example, the first element of the
array will be given the value 0.00 and the two succeeding elements will
be given the values 1.00 and 2.00.
&MYNML
X(1,1) = 0.00 , 1.00 , 2.00
/

File: gfortran.info, Node: X format descriptor without count field, Next: Commas in FORMAT specifications, Prev: Extensions to namelist, Up: Extensions
5.4 `X' format descriptor without count field
=============================================
To support legacy codes, GNU Fortran permits the count field of the `X'
edit descriptor in `FORMAT' statements to be omitted. When omitted,
the count is implicitly assumed to be one.
PRINT 10, 2, 3
10 FORMAT (I1, X, I1)

File: gfortran.info, Node: Commas in FORMAT specifications, Next: Missing period in FORMAT specifications, Prev: X format descriptor without count field, Up: Extensions
5.5 Commas in `FORMAT' specifications
=====================================
To support legacy codes, GNU Fortran allows the comma separator to be
omitted immediately before and after character string edit descriptors
in `FORMAT' statements.
PRINT 10, 2, 3
10 FORMAT ('FOO='I1' BAR='I2)

File: gfortran.info, Node: Missing period in FORMAT specifications, Next: I/O item lists, Prev: Commas in FORMAT specifications, Up: Extensions
5.6 Missing period in `FORMAT' specifications
=============================================
To support legacy codes, GNU Fortran allows missing periods in format
specifications if and only if `-std=legacy' is given on the command
line. This is considered non-conforming code and is discouraged.
REAL :: value
READ(*,10) value
10 FORMAT ('F4')

File: gfortran.info, Node: I/O item lists, Next: BOZ literal constants, Prev: Missing period in FORMAT specifications, Up: Extensions
5.7 I/O item lists
==================
To support legacy codes, GNU Fortran allows the input item list of the
`READ' statement, and the output item lists of the `WRITE' and `PRINT'
statements, to start with a comma.

File: gfortran.info, Node: BOZ literal constants, Next: Real array indices, Prev: I/O item lists, Up: Extensions
5.8 BOZ literal constants
=========================
As an extension, GNU Fortran allows hexadecimal BOZ literal constants to
be specified using the X prefix, in addition to the standard Z prefix.
BOZ literal constants can also be specified by adding a suffix to the
string. For example, `Z'ABC'' and `'ABC'Z' are equivalent.
The Fortran standard restricts the appearance of a BOZ literal
constant to the `DATA' statement, and it is expected to be assigned to
an `INTEGER' variable. GNU Fortran permits a BOZ literal to appear in
any initialization expression as well as assignment statements.
Attempts to use a BOZ literal constant to do a bitwise
initialization of a variable can lead to confusion. A BOZ literal
constant is converted to an `INTEGER' value with the kind type with the
largest decimal representation, and this value is then converted
numerically to the type and kind of the variable in question. Thus,
one should not expect a bitwise copy of the BOZ literal constant to be
assigned to a `REAL' variable.
Similarly, initializing an `INTEGER' variable with a statement such
as `DATA i/Z'FFFFFFFF'/' will produce an integer overflow rather than
the desired result of -1 when `i' is a 32-bit integer on a system that
supports 64-bit integers. The `-fno-range-check' option can be used as
a workaround for legacy code that initializes integers in this manner.

File: gfortran.info, Node: Real array indices, Next: Unary operators, Prev: BOZ literal constants, Up: Extensions
5.9 Real array indices
======================
As an extension, GNU Fortran allows the use of `REAL' expressions or
variables as array indices.

File: gfortran.info, Node: Unary operators, Next: Implicitly convert LOGICAL and INTEGER values, Prev: Real array indices, Up: Extensions
5.10 Unary operators
====================
As an extension, GNU Fortran allows unary plus and unary minus operators
to appear as the second operand of binary arithmetic operators without
the need for parenthesis.
X = Y * -Z

File: gfortran.info, Node: Implicitly convert LOGICAL and INTEGER values, Next: Hollerith constants support, Prev: Unary operators, Up: Extensions
5.11 Implicitly convert `LOGICAL' and `INTEGER' values
======================================================
As an extension for backwards compatibility with other compilers, GNU
Fortran allows the implicit conversion of `LOGICAL' values to `INTEGER'
values and vice versa. When converting from a `LOGICAL' to an
`INTEGER', `.FALSE.' is interpreted as zero, and `.TRUE.' is
interpreted as one. When converting from `INTEGER' to `LOGICAL', the
value zero is interpreted as `.FALSE.' and any nonzero value is
interpreted as `.TRUE.'.
INTEGER :: i = 1
IF (i) PRINT *, 'True'

File: gfortran.info, Node: Hollerith constants support, Next: Cray pointers, Prev: Implicitly convert LOGICAL and INTEGER values, Up: Extensions
5.12 Hollerith constants support
================================
GNU Fortran supports Hollerith constants in assignments, function
arguments, and `DATA' and `ASSIGN' statements. A Hollerith constant is
written as a string of characters preceded by an integer constant
indicating the character count, and the letter `H' or `h', and stored
in bytewise fashion in a numeric (`INTEGER', `REAL', or `complex') or
`LOGICAL' variable. The constant will be padded or truncated to fit
the size of the variable in which it is stored.
Examples of valid uses of Hollerith constants:
complex*16 x(2)
data x /16Habcdefghijklmnop, 16Hqrstuvwxyz012345/
x(1) = 16HABCDEFGHIJKLMNOP
call foo (4h abc)
Invalid Hollerith constants examples:
integer*4 a
a = 8H12345678 ! Valid, but the Hollerith constant will be truncated.
a = 0H ! At least one character is needed.
In general, Hollerith constants were used to provide a rudimentary
facility for handling character strings in early Fortran compilers,
prior to the introduction of `CHARACTER' variables in Fortran 77; in
those cases, the standard-compliant equivalent is to convert the
program to use proper character strings. On occasion, there may be a
case where the intent is specifically to initialize a numeric variable
with a given byte sequence. In these cases, the same result can be
obtained by using the `TRANSFER' statement, as in this example.
INTEGER(KIND=4) :: a
a = TRANSFER ("abcd", a) ! equivalent to: a = 4Habcd

File: gfortran.info, Node: Cray pointers, Next: CONVERT specifier, Prev: Hollerith constants support, Up: Extensions
5.13 Cray pointers
==================
Cray pointers are part of a non-standard extension that provides a
C-like pointer in Fortran. This is accomplished through a pair of
variables: an integer "pointer" that holds a memory address, and a
"pointee" that is used to dereference the pointer.
Pointer/pointee pairs are declared in statements of the form:
pointer ( <pointer> , <pointee> )
or,
pointer ( <pointer1> , <pointee1> ), ( <pointer2> , <pointee2> ), ...
The pointer is an integer that is intended to hold a memory address.
The pointee may be an array or scalar. A pointee can be an assumed
size array--that is, the last dimension may be left unspecified by
using a `*' in place of a value--but a pointee cannot be an assumed
shape array. No space is allocated for the pointee.
The pointee may have its type declared before or after the pointer
statement, and its array specification (if any) may be declared before,
during, or after the pointer statement. The pointer may be declared as
an integer prior to the pointer statement. However, some machines have
default integer sizes that are different than the size of a pointer,
and so the following code is not portable:
integer ipt
pointer (ipt, iarr)
If a pointer is declared with a kind that is too small, the compiler
will issue a warning; the resulting binary will probably not work
correctly, because the memory addresses stored in the pointers may be
truncated. It is safer to omit the first line of the above example; if
explicit declaration of ipt's type is omitted, then the compiler will
ensure that ipt is an integer variable large enough to hold a pointer.
Pointer arithmetic is valid with Cray pointers, but it is not the
same as C pointer arithmetic. Cray pointers are just ordinary
integers, so the user is responsible for determining how many bytes to
add to a pointer in order to increment it. Consider the following
example:
real target(10)
real pointee(10)
pointer (ipt, pointee)
ipt = loc (target)
ipt = ipt + 1
The last statement does not set `ipt' to the address of `target(1)',
as it would in C pointer arithmetic. Adding `1' to `ipt' just adds one
byte to the address stored in `ipt'.
Any expression involving the pointee will be translated to use the
value stored in the pointer as the base address.
To get the address of elements, this extension provides an intrinsic
function `LOC()'. The `LOC()' function is equivalent to the `&'
operator in C, except the address is cast to an integer type:
real ar(10)
pointer(ipt, arpte(10))
real arpte
ipt = loc(ar) ! Makes arpte is an alias for ar
arpte(1) = 1.0 ! Sets ar(1) to 1.0
The pointer can also be set by a call to the `MALLOC' intrinsic (see
*Note MALLOC::).
Cray pointees often are used to alias an existing variable. For
example:
integer target(10)
integer iarr(10)
pointer (ipt, iarr)
ipt = loc(target)
As long as `ipt' remains unchanged, `iarr' is now an alias for
`target'. The optimizer, however, will not detect this aliasing, so it
is unsafe to use `iarr' and `target' simultaneously. Using a pointee
in any way that violates the Fortran aliasing rules or assumptions is
illegal. It is the user's responsibility to avoid doing this; the
compiler works under the assumption that no such aliasing occurs.
Cray pointers will work correctly when there is no aliasing (i.e.,
when they are used to access a dynamically allocated block of memory),
and also in any routine where a pointee is used, but any variable with
which it shares storage is not used. Code that violates these rules
may not run as the user intends. This is not a bug in the optimizer;
any code that violates the aliasing rules is illegal. (Note that this
is not unique to GNU Fortran; any Fortran compiler that supports Cray
pointers will "incorrectly" optimize code with illegal aliasing.)
There are a number of restrictions on the attributes that can be
applied to Cray pointers and pointees. Pointees may not have the
`ALLOCATABLE', `INTENT', `OPTIONAL', `DUMMY', `TARGET', `INTRINSIC', or
`POINTER' attributes. Pointers may not have the `DIMENSION', `POINTER',
`TARGET', `ALLOCATABLE', `EXTERNAL', or `INTRINSIC' attributes.
Pointees may not occur in more than one pointer statement. A pointee
cannot be a pointer. Pointees cannot occur in equivalence, common, or
data statements.
A Cray pointer may also point to a function or a subroutine. For
example, the following excerpt is valid:
implicit none
external sub
pointer (subptr,subpte)
external subpte
subptr = loc(sub)
call subpte()
[...]
subroutine sub
[...]
end subroutine sub
A pointer may be modified during the course of a program, and this
will change the location to which the pointee refers. However, when
pointees are passed as arguments, they are treated as ordinary
variables in the invoked function. Subsequent changes to the pointer
will not change the base address of the array that was passed.

File: gfortran.info, Node: CONVERT specifier, Next: OpenMP, Prev: Cray pointers, Up: Extensions
5.14 CONVERT specifier
======================
GNU Fortran allows the conversion of unformatted data between little-
and big-endian representation to facilitate moving of data between
different systems. The conversion can be indicated with the `CONVERT'
specifier on the `OPEN' statement. *Note GFORTRAN_CONVERT_UNIT::, for
an alternative way of specifying the data format via an environment
variable.
Valid values for `CONVERT' are:
`CONVERT='NATIVE'' Use the native format. This is the default.
`CONVERT='SWAP'' Swap between little- and big-endian.
`CONVERT='LITTLE_ENDIAN'' Use the little-endian representation
for unformatted files.
`CONVERT='BIG_ENDIAN'' Use the big-endian representation for
unformatted files.
Using the option could look like this:
open(file='big.dat',form='unformatted',access='sequential', &
convert='big_endian')
The value of the conversion can be queried by using
`INQUIRE(CONVERT=ch)'. The values returned are `'BIG_ENDIAN'' and
`'LITTLE_ENDIAN''.
`CONVERT' works between big- and little-endian for `INTEGER' values
of all supported kinds and for `REAL' on IEEE systems of kinds 4 and 8.
Conversion between different "extended double" types on different
architectures such as m68k and x86_64, which GNU Fortran supports as
`REAL(KIND=10)' and `REAL(KIND=16)', will probably not work.
_Note that the values specified via the GFORTRAN_CONVERT_UNIT
environment variable will override the CONVERT specifier in the open
statement_. This is to give control over data formats to users who do
not have the source code of their program available.
Using anything but the native representation for unformatted data
carries a significant speed overhead. If speed in this area matters to
you, it is best if you use this only for data that needs to be portable.

File: gfortran.info, Node: OpenMP, Prev: CONVERT specifier, Up: Extensions
5.15 OpenMP
===========
GNU Fortran attempts to be OpenMP Application Program Interface v2.5
compatible when invoked with the `-fopenmp' option. GNU Fortran then
generates parallelized code according to the OpenMP directives used in
the source. The OpenMP Fortran runtime library routines are provided
both in a form of a Fortran 90 module named `omp_lib' and in a form of
a Fortran `include' file named `omp_lib.h'.
For details refer to the actual OpenMP Application Program Interface
v2.5 (http://www.openmp.org/drupal/mp-documents/spec25.pdf)
specification.

File: gfortran.info, Node: Intrinsic Procedures, Next: Contributing, Prev: Extensions, Up: Top
6 Intrinsic Procedures
**********************
* Menu:
* Introduction: Introduction to Intrinsics
* `ABORT': ABORT, Abort the program
* `ABS': ABS, Absolute value
* `ACCESS': ACCESS, Checks file access modes
* `ACHAR': ACHAR, Character in ASCII collating sequence
* `ACOS': ACOS, Arccosine function
* `ACOSH': ACOSH, Hyperbolic arccosine function
* `ADJUSTL': ADJUSTL, Left adjust a string
* `ADJUSTR': ADJUSTR, Right adjust a string
* `AIMAG': AIMAG, Imaginary part of complex number
* `AINT': AINT, Truncate to a whole number
* `ALARM': ALARM, Set an alarm clock
* `ALL': ALL, Determine if all values are true
* `ALLOCATED': ALLOCATED, Status of allocatable entity
* `AND': AND, Bitwise logical AND
* `ANINT': ANINT, Nearest whole number
* `ANY': ANY, Determine if any values are true
* `ASIN': ASIN, Arcsine function
* `ASINH': ASINH, Hyperbolic arcsine function
* `ASSOCIATED': ASSOCIATED, Status of a pointer or pointer/target pair
* `ATAN': ATAN, Arctangent function
* `ATAN2': ATAN2, Arctangent function
* `ATANH': ATANH, Hyperbolic arctangent function
* `BESJ0': BESJ0, Bessel function of the first kind of order 0
* `BESJ1': BESJ1, Bessel function of the first kind of order 1
* `BESJN': BESJN, Bessel function of the first kind
* `BESY0': BESY0, Bessel function of the second kind of order 0
* `BESY1': BESY1, Bessel function of the second kind of order 1
* `BESYN': BESYN, Bessel function of the second kind
* `BIT_SIZE': BIT_SIZE, Bit size inquiry function
* `BTEST': BTEST, Bit test function
* `CEILING': CEILING, Integer ceiling function
* `CHAR': CHAR, Integer-to-character conversion function
* `CHDIR': CHDIR, Change working directory
* `CHMOD': CHMOD, Change access permissions of files
* `CMPLX': CMPLX, Complex conversion function
* `COMMAND_ARGUMENT_COUNT': COMMAND_ARGUMENT_COUNT, Get number of command line arguments
* `COMPLEX': COMPLEX, Complex conversion function
* `CONJG': CONJG, Complex conjugate function
* `COS': COS, Cosine function
* `COSH': COSH, Hyperbolic cosine function
* `COUNT': COUNT, Count occurrences of TRUE in an array
* `CPU_TIME': CPU_TIME, CPU time subroutine
* `CSHIFT': CSHIFT, Circular shift elements of an array
* `CTIME': CTIME, Subroutine (or function) to convert a time into a string
* `DATE_AND_TIME': DATE_AND_TIME, Date and time subroutine
* `DBLE': DBLE, Double precision conversion function
* `DCMPLX': DCMPLX, Double complex conversion function
* `DFLOAT': DFLOAT, Double precision conversion function
* `DIGITS': DIGITS, Significant digits function
* `DIM': DIM, Positive difference
* `DOT_PRODUCT': DOT_PRODUCT, Dot product function
* `DPROD': DPROD, Double product function
* `DREAL': DREAL, Double real part function
* `DTIME': DTIME, Execution time subroutine (or function)
* `EOSHIFT': EOSHIFT, End-off shift elements of an array
* `EPSILON': EPSILON, Epsilon function
* `ERF': ERF, Error function
* `ERFC': ERFC, Complementary error function
* `ETIME': ETIME, Execution time subroutine (or function)
* `EXIT': EXIT, Exit the program with status.
* `EXP': EXP, Exponential function
* `EXPONENT': EXPONENT, Exponent function
* `FDATE': FDATE, Subroutine (or function) to get the current time as a string
* `FGET': FGET, Read a single character in stream mode from stdin
* `FGETC': FGETC, Read a single character in stream mode
* `FLOAT': FLOAT, Convert integer to default real
* `FLOOR': FLOOR, Integer floor function
* `FLUSH': FLUSH, Flush I/O unit(s)
* `FNUM': FNUM, File number function
* `FPUT': FPUT, Write a single character in stream mode to stdout
* `FPUTC': FPUTC, Write a single character in stream mode
* `FRACTION': FRACTION, Fractional part of the model representation
* `FREE': FREE, Memory de-allocation subroutine
* `FSEEK': FSEEK, Low level file positioning subroutine
* `FSTAT': FSTAT, Get file status
* `FTELL': FTELL, Current stream position
* `GERROR': GERROR, Get last system error message
* `GETARG': GETARG, Get command line arguments
* `GET_COMMAND': GET_COMMAND, Get the entire command line
* `GET_COMMAND_ARGUMENT': GET_COMMAND_ARGUMENT, Get command line arguments
* `GETCWD': GETCWD, Get current working directory
* `GETENV': GETENV, Get an environmental variable
* `GET_ENVIRONMENT_VARIABLE': GET_ENVIRONMENT_VARIABLE, Get an environmental variable
* `GETGID': GETGID, Group ID function
* `GETLOG': GETLOG, Get login name
* `GETPID': GETPID, Process ID function
* `GETUID': GETUID, User ID function
* `GMTIME': GMTIME, Convert time to GMT info
* `HOSTNM': HOSTNM, Get system host name
* `HUGE': HUGE, Largest number of a kind
* `IACHAR': IACHAR, Code in ASCII collating sequence
* `IAND': IAND, Bitwise logical and
* `IARGC': IARGC, Get the number of command line arguments
* `IBCLR': IBCLR, Clear bit
* `IBITS': IBITS, Bit extraction
* `IBSET': IBSET, Set bit
* `ICHAR': ICHAR, Character-to-integer conversion function
* `IDATE': IDATE, Current local time (day/month/year)
* `IEOR': IEOR, Bitwise logical exclusive or
* `IERRNO': IERRNO, Function to get the last system error number
* `INDEX': INDEX, Position of a substring within a string
* `INT': INT, Convert to integer type
* `INT2': INT2, Convert to 16-bit integer type
* `INT8': INT8, Convert to 64-bit integer type
* `IOR': IOR, Bitwise logical or
* `IRAND': IRAND, Integer pseudo-random number
* `ISATTY': ISATTY, Whether a unit is a terminal device
* `ISHFT': ISHFT, Shift bits
* `ISHFTC': ISHFTC, Shift bits circularly
* `ITIME': ITIME, Current local time (hour/minutes/seconds)
* `KILL': KILL, Send a signal to a process
* `KIND': KIND, Kind of an entity
* `LBOUND': LBOUND, Lower dimension bounds of an array
* `LEN': LEN, Length of a character entity
* `LEN_TRIM': LEN_TRIM, Length of a character entity without trailing blank characters
* `LGE': LGE, Lexical greater than or equal
* `LGT': LGT, Lexical greater than
* `LINK': LINK, Create a hard link
* `LLE': LLE, Lexical less than or equal
* `LLT': LLT, Lexical less than
* `LNBLNK': LNBLNK, Index of the last non-blank character in a string
* `LOC': LOC, Returns the address of a variable
* `LOG': LOG, Logarithm function
* `LOG10': LOG10, Base 10 logarithm function
* `LOGICAL': LOGICAL, Convert to logical type
* `LONG': LONG, Convert to integer type
* `LSHIFT': LSHIFT, Left shift bits
* `LSTAT': LSTAT, Get file status
* `LTIME': LTIME, Convert time to local time info
* `MALLOC': MALLOC, Dynamic memory allocation function
* `MATMUL': MATMUL, matrix multiplication
* `MAX': MAX, Maximum value of an argument list
* `MAXEXPONENT': MAXEXPONENT, Maximum exponent of a real kind
* `MAXLOC': MAXLOC, Location of the maximum value within an array
* `MAXVAL': MAXVAL, Maximum value of an array
* `MCLOCK': MCLOCK, Time function
* `MCLOCK8': MCLOCK8, Time function (64-bit)
* `MERGE': MERGE, Merge arrays
* `MIN': MIN, Minimum value of an argument list
* `MINEXPONENT': MINEXPONENT, Minimum exponent of a real kind
* `MINLOC': MINLOC, Location of the minimum value within an array
* `MINVAL': MINVAL, Minimum value of an array
* `MOD': MOD, Remainder function
* `MODULO': MODULO, Modulo function
* `MOVE_ALLOC': MOVE_ALLOC, Move allocation from one object to another
* `MVBITS': MVBITS, Move bits from one integer to another
* `NEAREST': NEAREST, Nearest representable number
* `NEW_LINE': NEW_LINE, New line character
* `NINT': NINT, Nearest whole number
* `NOT': NOT, Logical negation
* `NULL': NULL, Function that returns an disassociated pointer
* `OR': OR, Bitwise logical OR
* `PACK': PACK, Pack an array into an array of rank one
* `PERROR': PERROR, Print system error message
* `PRECISION': PRECISION, Decimal precision of a real kind
* `PRESENT': PRESENT, Determine whether an optional dummy argument is specified
* `PRODUCT': PRODUCT, Product of array elements
* `RADIX': RADIX, Base of a data model
* `RANDOM_NUMBER': RANDOM_NUMBER, Pseudo-random number
* `RANDOM_SEED': RANDOM_SEED, Initialize a pseudo-random number sequence
* `RAND': RAND, Real pseudo-random number
* `RANGE': RANGE, Decimal exponent range of a real kind
* `RAN': RAN, Real pseudo-random number
* `REAL': REAL, Convert to real type
* `RENAME': RENAME, Rename a file
* `REPEAT': REPEAT, Repeated string concatenation
* `RESHAPE': RESHAPE, Function to reshape an array
* `RRSPACING': RRSPACING, Reciprocal of the relative spacing
* `RSHIFT': RSHIFT, Right shift bits
* `SCALE': SCALE, Scale a real value
* `SCAN': SCAN, Scan a string for the presence of a set of characters
* `SECNDS': SECNDS, Time function
* `SECOND': SECOND, CPU time function
* `SELECTED_INT_KIND': SELECTED_INT_KIND, Choose integer kind
* `SELECTED_REAL_KIND': SELECTED_REAL_KIND, Choose real kind
* `SET_EXPONENT': SET_EXPONENT, Set the exponent of the model
* `SHAPE': SHAPE, Determine the shape of an array
* `SIGN': SIGN, Sign copying function
* `SIGNAL': SIGNAL, Signal handling subroutine (or function)
* `SIN': SIN, Sine function
* `SINH': SINH, Hyperbolic sine function
* `SIZE': SIZE, Function to determine the size of an array
* `SLEEP': SLEEP, Sleep for the specified number of seconds
* `SNGL': SNGL, Convert double precision real to default real
* `SPACING': SPACING, Smallest distance between two numbers of a given type
* `SPREAD': SPREAD, Add a dimension to an array
* `SQRT': SQRT, Square-root function
* `SRAND': SRAND, Reinitialize the random number generator
* `STAT': STAT, Get file status
* `SUM': SUM, Sum of array elements
* `SYMLNK': SYMLNK, Create a symbolic link
* `SYSTEM': SYSTEM, Execute a shell command
* `SYSTEM_CLOCK': SYSTEM_CLOCK, Time function
* `TAN': TAN, Tangent function
* `TANH': TANH, Hyperbolic tangent function
* `TIME': TIME, Time function
* `TIME8': TIME8, Time function (64-bit)
* `TINY': TINY, Smallest positive number of a real kind
* `TRANSFER': TRANSFER, Transfer bit patterns
* `TRANSPOSE': TRANSPOSE, Transpose an array of rank two
* `TRIM': TRIM, Remove trailing blank characters of a string
* `TTYNAM': TTYNAM, Get the name of a terminal device.
* `UBOUND': UBOUND, Upper dimension bounds of an array
* `UMASK': UMASK, Set the file creation mask
* `UNLINK': UNLINK, Remove a file from the file system
* `UNPACK': UNPACK, Unpack an array of rank one into an array
* `VERIFY': VERIFY, Scan a string for the absence of a set of characters
* `XOR': XOR, Bitwise logical exclusive or

File: gfortran.info, Node: Introduction to Intrinsics, Next: ABORT, Up: Intrinsic Procedures
6.1 Introduction to intrinsic procedures
========================================
The intrinsic procedures provided by GNU Fortran include all of the
intrinsic procedures required by the Fortran 95 standard, a set of
intrinsic procedures for backwards compatibility with G77, and a small
selection of intrinsic procedures from the Fortran 2003 standard. Any
conflict between a description here and a description in either the
Fortran 95 standard or the Fortran 2003 standard is unintentional, and
the standard(s) should be considered authoritative.
The enumeration of the `KIND' type parameter is processor defined in
the Fortran 95 standard. GNU Fortran defines the default integer type
and default real type by `INTEGER(KIND=4)' and `REAL(KIND=4)',
respectively. The standard mandates that both data types shall have
another kind, which have more precision. On typical target
architectures supported by `gfortran', this kind type parameter is
`KIND=8'. Hence, `REAL(KIND=8)' and `DOUBLE PRECISION' are equivalent.
In the description of generic intrinsic procedures, the kind type
parameter will be specified by `KIND=*', and in the description of
specific names for an intrinsic procedure the kind type parameter will
be explicitly given (e.g., `REAL(KIND=4)' or `REAL(KIND=8)'). Finally,
for brevity the optional `KIND=' syntax will be omitted.
Many of the intrinsic procedures take one or more optional arguments.
This document follows the convention used in the Fortran 95 standard,
and denotes such arguments by square brackets.
GNU Fortran offers the `-std=f95' and `-std=gnu' options, which can
be used to restrict the set of intrinsic procedures to a given
standard. By default, `gfortran' sets the `-std=gnu' option, and so
all intrinsic procedures described here are accepted. There is one
caveat. For a select group of intrinsic procedures, `g77' implemented
both a function and a subroutine. Both classes have been implemented
in `gfortran' for backwards compatibility with `g77'. It is noted here
that these functions and subroutines cannot be intermixed in a given
subprogram. In the descriptions that follow, the applicable standard
for each intrinsic procedure is noted.

File: gfortran.info, Node: ABORT, Next: ABS, Prev: Introduction to Intrinsics, Up: Intrinsic Procedures
6.2 `ABORT' -- Abort the program
================================
_Description_:
`ABORT' causes immediate termination of the program. On operating
systems that support a core dump, `ABORT' will produce a core dump,
which is suitable for debugging purposes.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL ABORT'
_Return value_:
Does not return.
_Example_:
program test_abort
integer :: i = 1, j = 2
if (i /= j) call abort
end program test_abort
_See also_:
*Note EXIT::, *Note KILL::

File: gfortran.info, Node: ABS, Next: ACCESS, Prev: ABORT, Up: Intrinsic Procedures
6.3 `ABS' -- Absolute value
===========================
_Description_:
`ABS(X)' computes the absolute value of `X'.
_Standard_:
F77 and later, has overloads that are GNU extensions
_Class_:
Elemental function
_Syntax_:
`RESULT = ABS(X)'
_Arguments_:
X The type of the argument shall be an
`INTEGER(*)', `REAL(*)', or `COMPLEX(*)'.
_Return value_:
The return value is of the same type and kind as the argument
except the return value is `REAL(*)' for a `COMPLEX(*)' argument.
_Example_:
program test_abs
integer :: i = -1
real :: x = -1.e0
complex :: z = (-1.e0,0.e0)
i = abs(i)
x = abs(x)
x = abs(z)
end program test_abs
_Specific names_:
Name Argument Return type Standard
`CABS(Z)' `COMPLEX(4) `REAL(4)' F77 and later
Z'
`DABS(X)' `REAL(8) `REAL(8)' F77 and later
X'
`IABS(I)' `INTEGER(4) `INTEGER(4)' F77 and later
I'
`ZABS(Z)' `COMPLEX(8) `COMPLEX(8)' GNU extension
Z'
`CDABS(Z)' `COMPLEX(8) `COMPLEX(8)' GNU extension
Z'

File: gfortran.info, Node: ACCESS, Next: ACHAR, Prev: ABS, Up: Intrinsic Procedures
6.4 `ACCESS' -- Checks file access modes
========================================
_Description_:
`ACCESS(NAME, MODE)' checks whether the file NAME exists, is
readable, writable or executable. Except for the executable check,
`ACCESS' can be replaced by Fortran 95's `INQUIRE'.
_Standard_:
GNU extension
_Class_:
Inquiry function
_Syntax_:
`RESULT = ACCESS(NAME, MODE)'
_Arguments_:
NAME Scalar `CHARACTER' with the file name.
Tailing blank are ignored unless the character
`achar(0)' is present, then all characters up
to and excluding `achar(0)' are used as file
name.
MODE Scalar `CHARACTER' with the file access mode,
may be any concatenation of `"r"' (readable),
`"w"' (writable) and `"x"' (executable), or `"
"' to check for existence.
_Return value_:
Returns a scalar `INTEGER', which is `0' if the file is accessible
in the given mode; otherwise or if an invalid argument has been
given for `MODE' the value `1' is returned.
_Example_:
program access_test
implicit none
character(len=*), parameter :: file = 'test.dat'
character(len=*), parameter :: file2 = 'test.dat '//achar(0)
if(access(file,' ') == 0) print *, trim(file),' is exists'
if(access(file,'r') == 0) print *, trim(file),' is readable'
if(access(file,'w') == 0) print *, trim(file),' is writable'
if(access(file,'x') == 0) print *, trim(file),' is executable'
if(access(file2,'rwx') == 0) &
print *, trim(file2),' is readable, writable and executable'
end program access_test
_Specific names_:
_See also_:

File: gfortran.info, Node: ACHAR, Next: ACOS, Prev: ACCESS, Up: Intrinsic Procedures
6.5 `ACHAR' -- Character in ASCII collating sequence
====================================================
_Description_:
`ACHAR(I)' returns the character located at position `I' in the
ASCII collating sequence.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ACHAR(I)'
_Arguments_:
I The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `CHARACTER' with a length of one. The
kind type parameter is the same as `KIND('A')'.
_Example_:
program test_achar
character c
c = achar(32)
end program test_achar
_Note_:
See *Note ICHAR:: for a discussion of converting between numerical
values and formatted string representations.
_See also_:
*Note CHAR::, *Note IACHAR::, *Note ICHAR::

File: gfortran.info, Node: ACOS, Next: ACOSH, Prev: ACHAR, Up: Intrinsic Procedures
6.6 `ACOS' -- Arccosine function
================================
_Description_:
`ACOS(X)' computes the arccosine of X (inverse of `COS(X)').
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ACOS(X)'
_Arguments_:
X The type shall be `REAL(*)' with a magnitude
that is less than one.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range 0
\leq \acos(x) \leq \pi. The kind type parameter is the same as X.
_Example_:
program test_acos
real(8) :: x = 0.866_8
x = acos(x)
end program test_acos
_Specific names_:
Name Argument Return type Standard
`DACOS(X)' `REAL(8) X' `REAL(8)' F77 and later
_See also_:
Inverse function: *Note COS::

File: gfortran.info, Node: ACOSH, Next: ADJUSTL, Prev: ACOS, Up: Intrinsic Procedures
6.7 `ACOSH' -- Hyperbolic arccosine function
============================================
_Description_:
`ACOSH(X)' computes the hyperbolic arccosine of X (inverse of
`COSH(X)').
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = ACOSH(X)'
_Arguments_:
X The type shall be `REAL(*)' with a magnitude
that is greater or equal to one.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range 0
\leq \acosh (x) \leq \infty.
_Example_:
PROGRAM test_acosh
REAL(8), DIMENSION(3) :: x = (/ 1.0, 2.0, 3.0 /)
WRITE (*,*) ACOSH(x)
END PROGRAM
_Specific names_:
Name Argument Return type Standard
`DACOSH(X)' `REAL(8) X' `REAL(8)' GNU extension
_See also_:
Inverse function: *Note COSH::

File: gfortran.info, Node: ADJUSTL, Next: ADJUSTR, Prev: ACOSH, Up: Intrinsic Procedures
6.8 `ADJUSTL' -- Left adjust a string
=====================================
_Description_:
`ADJUSTL(STR)' will left adjust a string by removing leading
spaces. Spaces are inserted at the end of the string as needed.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ADJUSTL(STR)'
_Arguments_:
STR The type shall be `CHARACTER'.
_Return value_:
The return value is of type `CHARACTER' where leading spaces are
removed and the same number of spaces are inserted on the end of
STR.
_Example_:
program test_adjustl
character(len=20) :: str = ' gfortran'
str = adjustl(str)
print *, str
end program test_adjustl
_See also_:
*Note ADJUSTR::, *Note TRIM::

File: gfortran.info, Node: ADJUSTR, Next: AIMAG, Prev: ADJUSTL, Up: Intrinsic Procedures
6.9 `ADJUSTR' -- Right adjust a string
======================================
_Description_:
`ADJUSTR(STR)' will right adjust a string by removing trailing
spaces. Spaces are inserted at the start of the string as needed.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ADJUSTR(STR)'
_Arguments_:
STR The type shall be `CHARACTER'.
_Return value_:
The return value is of type `CHARACTER' where trailing spaces are
removed and the same number of spaces are inserted at the start of
STR.
_Example_:
program test_adjustr
character(len=20) :: str = 'gfortran'
str = adjustr(str)
print *, str
end program test_adjustr
_See also_:
*Note ADJUSTL::, *Note TRIM::

File: gfortran.info, Node: AIMAG, Next: AINT, Prev: ADJUSTR, Up: Intrinsic Procedures
6.10 `AIMAG' -- Imaginary part of complex number
================================================
_Description_:
`AIMAG(Z)' yields the imaginary part of complex argument `Z'. The
`IMAG(Z)' and `IMAGPART(Z)' intrinsic functions are provided for
compatibility with `g77', and their use in new code is strongly
discouraged.
_Standard_:
F77 and later, has overloads that are GNU extensions
_Class_:
Elemental function
_Syntax_:
`RESULT = AIMAG(Z)'
_Arguments_:
Z The type of the argument shall be `COMPLEX(*)'.
_Return value_:
The return value is of type real with the kind type parameter of
the argument.
_Example_:
program test_aimag
complex(4) z4
complex(8) z8
z4 = cmplx(1.e0_4, 0.e0_4)
z8 = cmplx(0.e0_8, 1.e0_8)
print *, aimag(z4), dimag(z8)
end program test_aimag
_Specific names_:
Name Argument Return type Standard
`DIMAG(Z)' `COMPLEX(8) `REAL(8)' GNU extension
Z'
`IMAG(Z)' `COMPLEX(*) `REAL(*)' GNU extension
Z'
`IMAGPART(Z)' `COMPLEX(*) `REAL(*)' GNU extension
Z'

File: gfortran.info, Node: AINT, Next: ALARM, Prev: AIMAG, Up: Intrinsic Procedures
6.11 `AINT' -- Truncate to a whole number
=========================================
_Description_:
`AINT(X [, KIND])' truncates its argument to a whole number.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = AINT(X [, KIND])'
_Arguments_:
X The type of the argument shall be `REAL(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
The return value is of type real with the kind type parameter of
the argument if the optional KIND is absent; otherwise, the kind
type parameter will be given by KIND. If the magnitude of X is
less than one, then `AINT(X)' returns zero. If the magnitude is
equal to or greater than one, then it returns the largest whole
number that does not exceed its magnitude. The sign is the same
as the sign of X.
_Example_:
program test_aint
real(4) x4
real(8) x8
x4 = 1.234E0_4
x8 = 4.321_8
print *, aint(x4), dint(x8)
x8 = aint(x4,8)
end program test_aint
_Specific names_:
Name Argument Return type Standard
`DINT(X)' `REAL(8) X' `REAL(8)' F77 and later

File: gfortran.info, Node: ALARM, Next: ALL, Prev: AINT, Up: Intrinsic Procedures
6.12 `ALARM' -- Execute a routine after a given delay
=====================================================
_Description_:
`ALARM(SECONDS, HANDLER [, STATUS])' causes external subroutine
HANDLER to be executed after a delay of SECONDS by using
`alarm(2)' to set up a signal and `signal(2)' to catch it. If
STATUS is supplied, it will be returned with the number of seconds
remaining until any previously scheduled alarm was due to be
delivered, or zero if there was no previously scheduled alarm.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL ALARM(SECONDS, HANDLER [, STATUS])'
_Arguments_:
SECONDS The type of the argument shall be a scalar
`INTEGER'. It is `INTENT(IN)'.
HANDLER Signal handler (`INTEGER FUNCTION' or
`SUBROUTINE') or dummy/global `INTEGER'
scalar. The scalar values may be either
`SIG_IGN=1' to ignore the alarm generated or
`SIG_DFL=0' to set the default action. It is
`INTENT(IN)'.
STATUS (Optional) STATUS shall be a scalar variable
of the default `INTEGER' kind. It is
`INTENT(OUT)'.
_Example_:
program test_alarm
external handler_print
integer i
call alarm (3, handler_print, i)
print *, i
call sleep(10)
end program test_alarm
This will cause the external routine HANDLER_PRINT to be called
after 3 seconds.

File: gfortran.info, Node: ALL, Next: ALLOCATED, Prev: ALARM, Up: Intrinsic Procedures
6.13 `ALL' -- All values in MASK along DIM are true
===================================================
_Description_:
`ALL(MASK [, DIM])' determines if all the values are true in MASK
in the array along dimension DIM.
_Standard_:
F95 and later
_Class_:
transformational function
_Syntax_:
`RESULT = ALL(MASK [, DIM])'
_Arguments_:
MASK The type of the argument shall be `LOGICAL(*)'
and it shall not be scalar.
DIM (Optional) DIM shall be a scalar integer with
a value that lies between one and the rank of
MASK.
_Return value_:
`ALL(MASK)' returns a scalar value of type `LOGICAL(*)' where the
kind type parameter is the same as the kind type parameter of
MASK. If DIM is present, then `ALL(MASK, DIM)' returns an array
with the rank of MASK minus 1. The shape is determined from the
shape of MASK where the DIM dimension is elided.
(A)
`ALL(MASK)' is true if all elements of MASK are true. It
also is true if MASK has zero size; otherwise, it is false.
(B)
If the rank of MASK is one, then `ALL(MASK,DIM)' is equivalent
to `ALL(MASK)'. If the rank is greater than one, then
`ALL(MASK,DIM)' is determined by applying `ALL' to the array
sections.
_Example_:
program test_all
logical l
l = all((/.true., .true., .true./))
print *, l
call section
contains
subroutine section
integer a(2,3), b(2,3)
a = 1
b = 1
b(2,2) = 2
print *, all(a .eq. b, 1)
print *, all(a .eq. b, 2)
end subroutine section
end program test_all

File: gfortran.info, Node: ALLOCATED, Next: AND, Prev: ALL, Up: Intrinsic Procedures
6.14 `ALLOCATED' -- Status of an allocatable entity
===================================================
_Description_:
`ALLOCATED(X)' checks the status of whether X is allocated.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = ALLOCATED(X)'
_Arguments_:
X The argument shall be an `ALLOCATABLE' array.
_Return value_:
The return value is a scalar `LOGICAL' with the default logical
kind type parameter. If X is allocated, `ALLOCATED(X)' is
`.TRUE.'; otherwise, it returns the `.TRUE.'
_Example_:
program test_allocated
integer :: i = 4
real(4), allocatable :: x(:)
if (allocated(x) .eqv. .false.) allocate(x(i))
end program test_allocated

File: gfortran.info, Node: AND, Next: ANINT, Prev: ALLOCATED, Up: Intrinsic Procedures
6.15 `AND' -- Bitwise logical AND
=================================
_Description_:
Bitwise logical `AND'.
This intrinsic routine is provided for backwards compatibility with
GNU Fortran 77. For integer arguments, programmers should consider
the use of the *Note IAND:: intrinsic defined by the Fortran
standard.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = AND(I, J)'
_Arguments_:
I The type shall be either `INTEGER(*)' or
`LOGICAL'.
J The type shall be either `INTEGER(*)' or
`LOGICAL'.
_Return value_:
The return type is either `INTEGER(*)' or `LOGICAL' after
cross-promotion of the arguments.
_Example_:
PROGRAM test_and
LOGICAL :: T = .TRUE., F = .FALSE.
INTEGER :: a, b
DATA a / Z'F' /, b / Z'3' /
WRITE (*,*) AND(T, T), AND(T, F), AND(F, T), AND(F, F)
WRITE (*,*) AND(a, b)
END PROGRAM
_See also_:
F95 elemental function: *Note IAND::

File: gfortran.info, Node: ANINT, Next: ANY, Prev: AND, Up: Intrinsic Procedures
6.16 `ANINT' -- Nearest whole number
====================================
_Description_:
`ANINT(X [, KIND])' rounds its argument to the nearest whole
number.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ANINT(X [, KIND])'
_Arguments_:
X The type of the argument shall be `REAL(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
The return value is of type real with the kind type parameter of
the argument if the optional KIND is absent; otherwise, the kind
type parameter will be given by KIND. If X is greater than zero,
then `ANINT(X)' returns `AINT(X+0.5)'. If X is less than or equal
to zero, then it returns `AINT(X-0.5)'.
_Example_:
program test_anint
real(4) x4
real(8) x8
x4 = 1.234E0_4
x8 = 4.321_8
print *, anint(x4), dnint(x8)
x8 = anint(x4,8)
end program test_anint
_Specific names_:
Name Argument Return type Standard
`DNINT(X)' `REAL(8) X' `REAL(8)' F77 and later

File: gfortran.info, Node: ANY, Next: ASIN, Prev: ANINT, Up: Intrinsic Procedures
6.17 `ANY' -- Any value in MASK along DIM is true
=================================================
_Description_:
`ANY(MASK [, DIM])' determines if any of the values in the logical
array MASK along dimension DIM are `.TRUE.'.
_Standard_:
F95 and later
_Class_:
transformational function
_Syntax_:
`RESULT = ANY(MASK [, DIM])'
_Arguments_:
MASK The type of the argument shall be `LOGICAL(*)'
and it shall not be scalar.
DIM (Optional) DIM shall be a scalar integer with
a value that lies between one and the rank of
MASK.
_Return value_:
`ANY(MASK)' returns a scalar value of type `LOGICAL(*)' where the
kind type parameter is the same as the kind type parameter of
MASK. If DIM is present, then `ANY(MASK, DIM)' returns an array
with the rank of MASK minus 1. The shape is determined from the
shape of MASK where the DIM dimension is elided.
(A)
`ANY(MASK)' is true if any element of MASK is true;
otherwise, it is false. It also is false if MASK has zero
size.
(B)
If the rank of MASK is one, then `ANY(MASK,DIM)' is equivalent
to `ANY(MASK)'. If the rank is greater than one, then
`ANY(MASK,DIM)' is determined by applying `ANY' to the array
sections.
_Example_:
program test_any
logical l
l = any((/.true., .true., .true./))
print *, l
call section
contains
subroutine section
integer a(2,3), b(2,3)
a = 1
b = 1
b(2,2) = 2
print *, any(a .eq. b, 1)
print *, any(a .eq. b, 2)
end subroutine section
end program test_any

File: gfortran.info, Node: ASIN, Next: ASINH, Prev: ANY, Up: Intrinsic Procedures
6.18 `ASIN' -- Arcsine function
===============================
_Description_:
`ASIN(X)' computes the arcsine of its X (inverse of `SIN(X)').
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ASIN(X)'
_Arguments_:
X The type shall be `REAL(*)', and a magnitude
that is less than one.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range
-\pi / 2 \leq \asin (x) \leq \pi / 2. The kind type parameter is
the same as X.
_Example_:
program test_asin
real(8) :: x = 0.866_8
x = asin(x)
end program test_asin
_Specific names_:
Name Argument Return type Standard
`DASIN(X)' `REAL(8) X' `REAL(8)' F77 and later
_See also_:
Inverse function: *Note SIN::

File: gfortran.info, Node: ASINH, Next: ASSOCIATED, Prev: ASIN, Up: Intrinsic Procedures
6.19 `ASINH' -- Hyperbolic arcsine function
===========================================
_Description_:
`ASINH(X)' computes the hyperbolic arcsine of X (inverse of
`SINH(X)').
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = ASINH(X)'
_Arguments_:
X The type shall be `REAL(*)', with X a real
number.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range
-\infty \leq \asinh (x) \leq \infty.
_Example_:
PROGRAM test_asinh
REAL(8), DIMENSION(3) :: x = (/ -1.0, 0.0, 1.0 /)
WRITE (*,*) ASINH(x)
END PROGRAM
_Specific names_:
Name Argument Return type Standard
`DASINH(X)' `REAL(8) X' `REAL(8)' GNU extension.
_See also_:
Inverse function: *Note SINH::

File: gfortran.info, Node: ASSOCIATED, Next: ATAN, Prev: ASINH, Up: Intrinsic Procedures
6.20 `ASSOCIATED' -- Status of a pointer or pointer/target pair
===============================================================
_Description_:
`ASSOCIATED(PTR [, TGT])' determines the status of the pointer PTR
or if PTR is associated with the target TGT.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = ASSOCIATED(PTR [, TGT])'
_Arguments_:
PTR PTR shall have the `POINTER' attribute and it
can be of any type.
TGT (Optional) TGT shall be a `POINTER' or a
`TARGET'. It must have the same type, kind
type parameter, and array rank as PTR.
The status of neither PTR nor TGT can be undefined.
_Return value_:
`ASSOCIATED(PTR)' returns a scalar value of type `LOGICAL(4)'.
There are several cases:
(A) If the optional TGT is not present, then `ASSOCIATED(PTR)'
is true if PTR is associated with a target; otherwise, it
returns false.
(B) If TGT is present and a scalar target, the result is true if
TGT is not a 0 sized storage sequence and the target
associated with PTR occupies the same storage units. If PTR
is disassociated, then the result is false.
(C) If TGT is present and an array target, the result is true if
TGT and PTR have the same shape, are not 0 sized arrays, are
arrays whose elements are not 0 sized storage sequences, and
TGT and PTR occupy the same storage units in array element
order. As in case(B), the result is false, if PTR is
disassociated.
(D) If TGT is present and an scalar pointer, the result is true if
target associated with PTR and the target associated with TGT
are not 0 sized storage sequences and occupy the same storage
units. The result is false, if either TGT or PTR is
disassociated.
(E) If TGT is present and an array pointer, the result is true if
target associated with PTR and the target associated with TGT
have the same shape, are not 0 sized arrays, are arrays whose
elements are not 0 sized storage sequences, and TGT and PTR
occupy the same storage units in array element order. The
result is false, if either TGT or PTR is disassociated.
_Example_:
program test_associated
implicit none
real, target :: tgt(2) = (/1., 2./)
real, pointer :: ptr(:)
ptr => tgt
if (associated(ptr) .eqv. .false.) call abort
if (associated(ptr,tgt) .eqv. .false.) call abort
end program test_associated
_See also_:
*Note NULL::

File: gfortran.info, Node: ATAN, Next: ATAN2, Prev: ASSOCIATED, Up: Intrinsic Procedures
6.21 `ATAN' -- Arctangent function
==================================
_Description_:
`ATAN(X)' computes the arctangent of X.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ATAN(X)'
_Arguments_:
X The type shall be `REAL(*)'.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range -
\pi / 2 \leq \atan (x) \leq \pi / 2.
_Example_:
program test_atan
real(8) :: x = 2.866_8
x = atan(x)
end program test_atan
_Specific names_:
Name Argument Return type Standard
`DATAN(X)' `REAL(8) X' `REAL(8)' F77 and later
_See also_:
Inverse function: *Note TAN::

File: gfortran.info, Node: ATAN2, Next: ATANH, Prev: ATAN, Up: Intrinsic Procedures
6.22 `ATAN2' -- Arctangent function
===================================
_Description_:
`ATAN2(Y,X)' computes the arctangent of the complex number X + i Y.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ATAN2(Y,X)'
_Arguments_:
Y The type shall be `REAL(*)'.
X The type and kind type parameter shall be the
same as Y. If Y is zero, then X must be
nonzero.
_Return value_:
The return value has the same type and kind type parameter as Y.
It is the principal value of the complex number X + i Y. If X is
nonzero, then it lies in the range -\pi \le \atan (x) \leq \pi.
The sign is positive if Y is positive. If Y is zero, then the
return value is zero if X is positive and \pi if X is negative.
Finally, if X is zero, then the magnitude of the result is \pi/2.
_Example_:
program test_atan2
real(4) :: x = 1.e0_4, y = 0.5e0_4
x = atan2(y,x)
end program test_atan2
_Specific names_:
Name Argument Return type Standard
`DATAN2(X)' `REAL(8) X' `REAL(8)' F77 and later

File: gfortran.info, Node: ATANH, Next: BESJ0, Prev: ATAN2, Up: Intrinsic Procedures
6.23 `ATANH' -- Hyperbolic arctangent function
==============================================
_Description_:
`ATANH(X)' computes the hyperbolic arctangent of X (inverse of
`TANH(X)').
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = ATANH(X)'
_Arguments_:
X The type shall be `REAL(*)' with a magnitude
that is less than or equal to one.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range
-\infty \leq \atanh(x) \leq \infty.
_Example_:
PROGRAM test_atanh
REAL, DIMENSION(3) :: x = (/ -1.0, 0.0, 1.0 /)
WRITE (*,*) ATANH(x)
END PROGRAM
_Specific names_:
Name Argument Return type Standard
`DATANH(X)' `REAL(8) X' `REAL(8)' GNU extension
_See also_:
Inverse function: *Note TANH::

File: gfortran.info, Node: BESJ0, Next: BESJ1, Prev: ATANH, Up: Intrinsic Procedures
6.24 `BESJ0' -- Bessel function of the first kind of order 0
============================================================
_Description_:
`BESJ0(X)' computes the Bessel function of the first kind of order
0 of X.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = BESJ0(X)'
_Arguments_:
X The type shall be `REAL(*)', and it shall be
scalar.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range -
0.4027... \leq Bessel (0,x) \leq 1.
_Example_:
program test_besj0
real(8) :: x = 0.0_8
x = besj0(x)
end program test_besj0
_Specific names_:
Name Argument Return type Standard
`DBESJ0(X)' `REAL(8) X' `REAL(8)' GNU extension

File: gfortran.info, Node: BESJ1, Next: BESJN, Prev: BESJ0, Up: Intrinsic Procedures
6.25 `BESJ1' -- Bessel function of the first kind of order 1
============================================================
_Description_:
`BESJ1(X)' computes the Bessel function of the first kind of order
1 of X.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = BESJ1(X)'
_Arguments_:
X The type shall be `REAL(*)', and it shall be
scalar.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range -
0.5818... \leq Bessel (0,x) \leq 0.5818 .
_Example_:
program test_besj1
real(8) :: x = 1.0_8
x = besj1(x)
end program test_besj1
_Specific names_:
Name Argument Return type Standard
`DBESJ1(X)' `REAL(8) X' `REAL(8)' GNU extension

File: gfortran.info, Node: BESJN, Next: BESY0, Prev: BESJ1, Up: Intrinsic Procedures
6.26 `BESJN' -- Bessel function of the first kind
=================================================
_Description_:
`BESJN(N, X)' computes the Bessel function of the first kind of
order N of X.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = BESJN(N, X)'
_Arguments_:
N The type shall be `INTEGER(*)', and it shall
be scalar.
X The type shall be `REAL(*)', and it shall be
scalar.
_Return value_:
The return value is a scalar of type `REAL(*)'.
_Example_:
program test_besjn
real(8) :: x = 1.0_8
x = besjn(5,x)
end program test_besjn
_Specific names_:
Name Argument Return type Standard
`DBESJN(X)' `INTEGER(*) `REAL(8)' GNU extension
N'
`REAL(8) X'

File: gfortran.info, Node: BESY0, Next: BESY1, Prev: BESJN, Up: Intrinsic Procedures
6.27 `BESY0' -- Bessel function of the second kind of order 0
=============================================================
_Description_:
`BESY0(X)' computes the Bessel function of the second kind of
order 0 of X.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = BESY0(X)'
_Arguments_:
X The type shall be `REAL(*)', and it shall be
scalar.
_Return value_:
The return value is a scalar of type `REAL(*)'.
_Example_:
program test_besy0
real(8) :: x = 0.0_8
x = besy0(x)
end program test_besy0
_Specific names_:
Name Argument Return type Standard
`DBESY0(X)' `REAL(8) X' `REAL(8)' GNU extension

File: gfortran.info, Node: BESY1, Next: BESYN, Prev: BESY0, Up: Intrinsic Procedures
6.28 `BESY1' -- Bessel function of the second kind of order 1
=============================================================
_Description_:
`BESY1(X)' computes the Bessel function of the second kind of
order 1 of X.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = BESY1(X)'
_Arguments_:
X The type shall be `REAL(*)', and it shall be
scalar.
_Return value_:
The return value is a scalar of type `REAL(*)'.
_Example_:
program test_besy1
real(8) :: x = 1.0_8
x = besy1(x)
end program test_besy1
_Specific names_:
Name Argument Return type Standard
`DBESY1(X)' `REAL(8) X' `REAL(8)' GNU extension

File: gfortran.info, Node: BESYN, Next: BIT_SIZE, Prev: BESY1, Up: Intrinsic Procedures
6.29 `BESYN' -- Bessel function of the second kind
==================================================
_Description_:
`BESYN(N, X)' computes the Bessel function of the second kind of
order N of X.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = BESYN(N, X)'
_Arguments_:
N The type shall be `INTEGER(*)', and it shall
be scalar.
X The type shall be `REAL(*)', and it shall be
scalar.
_Return value_:
The return value is a scalar of type `REAL(*)'.
_Example_:
program test_besyn
real(8) :: x = 1.0_8
x = besyn(5,x)
end program test_besyn
_Specific names_:
Name Argument Return type Standard
`DBESYN(N,X)' `INTEGER(*) `REAL(8)' GNU extension
N'
`REAL(8)
X'

File: gfortran.info, Node: BIT_SIZE, Next: BTEST, Prev: BESYN, Up: Intrinsic Procedures
6.30 `BIT_SIZE' -- Bit size inquiry function
============================================
_Description_:
`BIT_SIZE(I)' returns the number of bits (integer precision plus
sign bit) represented by the type of I.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = BIT_SIZE(I)'
_Arguments_:
I The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(*)'
_Example_:
program test_bit_size
integer :: i = 123
integer :: size
size = bit_size(i)
print *, size
end program test_bit_size

File: gfortran.info, Node: BTEST, Next: CEILING, Prev: BIT_SIZE, Up: Intrinsic Procedures
6.31 `BTEST' -- Bit test function
=================================
_Description_:
`BTEST(I,POS)' returns logical `.TRUE.' if the bit at POS in I is
set.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = BTEST(I, POS)'
_Arguments_:
I The type shall be `INTEGER(*)'.
POS The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `LOGICAL'
_Example_:
program test_btest
integer :: i = 32768 + 1024 + 64
integer :: pos
logical :: bool
do pos=0,16
bool = btest(i, pos)
print *, pos, bool
end do
end program test_btest

File: gfortran.info, Node: CEILING, Next: CHAR, Prev: BTEST, Up: Intrinsic Procedures
6.32 `CEILING' -- Integer ceiling function
==========================================
_Description_:
`CEILING(X)' returns the least integer greater than or equal to X.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = CEILING(X [, KIND])'
_Arguments_:
X The type shall be `REAL(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
The return value is of type `INTEGER(KIND)'
_Example_:
program test_ceiling
real :: x = 63.29
real :: y = -63.59
print *, ceiling(x) ! returns 64
print *, ceiling(y) ! returns -63
end program test_ceiling
_See also_:
*Note FLOOR::, *Note NINT::

File: gfortran.info, Node: CHAR, Next: CHDIR, Prev: CEILING, Up: Intrinsic Procedures
6.33 `CHAR' -- Character conversion function
============================================
_Description_:
`CHAR(I [, KIND])' returns the character represented by the
integer I.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = CHAR(I [, KIND])'
_Arguments_:
I The type shall be `INTEGER(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
The return value is of type `CHARACTER(1)'
_Example_:
program test_char
integer :: i = 74
character(1) :: c
c = char(i)
print *, i, c ! returns 'J'
end program test_char
_Note_:
See *Note ICHAR:: for a discussion of converting between numerical
values and formatted string representations.
_See also_:
*Note ACHAR::, *Note IACHAR::, *Note ICHAR::

File: gfortran.info, Node: CHDIR, Next: CHMOD, Prev: CHAR, Up: Intrinsic Procedures
6.34 `CHDIR' -- Change working directory
========================================
_Description_:
Change current working directory to a specified path.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL CHDIR(NAME [, STATUS])'
`STATUS = CHDIR(NAME)'
_Arguments_:
NAME The type shall be `CHARACTER(*)' and shall
specify a valid path
within the file system.
STATUS (Optional) `INTEGER' status flag of the default
kind. Returns 0 on
success, and a system specific
and non-zero error code otherwise.
_Example_:
PROGRAM test_chdir
CHARACTER(len=255) :: path
CALL getcwd(path)
WRITE(*,*) TRIM(path)
CALL chdir("/tmp")
CALL getcwd(path)
WRITE(*,*) TRIM(path)
END PROGRAM
_See also_:
*Note GETCWD::

File: gfortran.info, Node: CHMOD, Next: CMPLX, Prev: CHDIR, Up: Intrinsic Procedures
6.35 `CHMOD' -- Change access permissions of files
==================================================
_Description_:
`CHMOD' changes the permissions of a file. This function invokes
`/bin/chmod' and might therefore not work on all platforms.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL CHMOD(NAME, MODE[, STATUS])'
`STATUS = CHMOD(NAME, MODE)'
_Arguments_:
NAME Scalar `CHARACTER' with the file name.
Trailing blanks are ignored unless the
character `achar(0)' is present, then all
characters up to and excluding `achar(0)' are
used as the file name.
MODE Scalar `CHARACTER' giving the file permission.
MODE uses the same syntax as the MODE argument
of `/bin/chmod'.
STATUS (optional) scalar `INTEGER', which is `0' on
success and non-zero otherwise.
_Return value_:
In either syntax, STATUS is set to `0' on success and non-zero
otherwise.
_Example_:
`CHMOD' as subroutine
program chmod_test
implicit none
integer :: status
call chmod('test.dat','u+x',status)
print *, 'Status: ', status
end program chmod_test
`CHMOD' as non-elemental function:
program chmod_test
implicit none
integer :: status
status = chmod('test.dat','u+x')
print *, 'Status: ', status
end program chmod_test

File: gfortran.info, Node: CMPLX, Next: COMMAND_ARGUMENT_COUNT, Prev: CHMOD, Up: Intrinsic Procedures
6.36 `CMPLX' -- Complex conversion function
===========================================
_Description_:
`CMPLX(X [, Y [, KIND]])' returns a complex number where X is
converted to the real component. If Y is present it is converted
to the imaginary component. If Y is not present then the
imaginary component is set to 0.0. If X is complex then Y must
not be present.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = CMPLX(X [, Y [, KIND]])'
_Arguments_:
X The type may be `INTEGER(*)', `REAL(*)',
or `COMPLEX(*)'.
Y (Optional; only allowed if X is not
`COMPLEX(*)'.) May be `INTEGER(*)'
or `REAL(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
The return value is of `COMPLEX' type, with a kind equal to KIND
if it is specified. If KIND is not specified, the result is of
the default `COMPLEX' kind, regardless of the kinds of X and Y.
_Example_:
program test_cmplx
integer :: i = 42
real :: x = 3.14
complex :: z
z = cmplx(i, x)
print *, z, cmplx(x)
end program test_cmplx
_See also_:
*Note COMPLEX::

File: gfortran.info, Node: COMMAND_ARGUMENT_COUNT, Next: COMPLEX, Prev: CMPLX, Up: Intrinsic Procedures
6.37 `COMMAND_ARGUMENT_COUNT' -- Get number of command line arguments
=====================================================================
_Description_:
`COMMAND_ARGUMENT_COUNT()' returns the number of arguments passed
on the command line when the containing program was invoked.
_Standard_:
F2003
_Class_:
Inquiry function
_Syntax_:
`RESULT = COMMAND_ARGUMENT_COUNT()'
_Arguments_:
None
_Return value_:
The return value is of type `INTEGER(4)'
_Example_:
program test_command_argument_count
integer :: count
count = command_argument_count()
print *, count
end program test_command_argument_count
_See also_:
*Note GET_COMMAND::, *Note GET_COMMAND_ARGUMENT::

File: gfortran.info, Node: COMPLEX, Next: CONJG, Prev: COMMAND_ARGUMENT_COUNT, Up: Intrinsic Procedures
6.38 `COMPLEX' -- Complex conversion function
=============================================
_Description_:
`COMPLEX(X, Y)' returns a complex number where X is converted to
the real component and Y is converted to the imaginary component.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = COMPLEX(X, Y)'
_Arguments_:
X The type may be `INTEGER(*)' or `REAL(*)'.
Y The type may be `INTEGER(*)' or `REAL(*)'.
_Return value_:
If X and Y are both of `INTEGER' type, then the return value is of
default `COMPLEX' type.
If X and Y are of `REAL' type, or one is of `REAL' type and one is
of `INTEGER' type, then the return value is of `COMPLEX' type with
a kind equal to that of the `REAL' argument with the highest
precision.
_Example_:
program test_complex
integer :: i = 42
real :: x = 3.14
print *, complex(i, x)
end program test_complex
_See also_:
*Note CMPLX::

File: gfortran.info, Node: CONJG, Next: COS, Prev: COMPLEX, Up: Intrinsic Procedures
6.39 `CONJG' -- Complex conjugate function
==========================================
_Description_:
`CONJG(Z)' returns the conjugate of Z. If Z is `(x, y)' then the
result is `(x, -y)'
_Standard_:
F77 and later, has overloads that are GNU extensions
_Class_:
Elemental function
_Syntax_:
`Z = CONJG(Z)'
_Arguments_:
Z The type shall be `COMPLEX(*)'.
_Return value_:
The return value is of type `COMPLEX(*)'.
_Example_:
program test_conjg
complex :: z = (2.0, 3.0)
complex(8) :: dz = (2.71_8, -3.14_8)
z= conjg(z)
print *, z
dz = dconjg(dz)
print *, dz
end program test_conjg
_Specific names_:
Name Argument Return type Standard
`DCONJG(Z)' `COMPLEX(8) `COMPLEX(8)' GNU extension
Z'

File: gfortran.info, Node: COS, Next: COSH, Prev: CONJG, Up: Intrinsic Procedures
6.40 `COS' -- Cosine function
=============================
_Description_:
`COS(X)' computes the cosine of X.
_Standard_:
F77 and later, has overloads that are GNU extensions
_Class_:
Elemental function
_Syntax_:
`RESULT = COS(X)'
_Arguments_:
X The type shall be `REAL(*)' or `COMPLEX(*)'.
_Return value_:
The return value is of type `REAL(*)' and it lies in the range -1
\leq \cos (x) \leq 1. The kind type parameter is the same as X.
_Example_:
program test_cos
real :: x = 0.0
x = cos(x)
end program test_cos
_Specific names_:
Name Argument Return type Standard
`DCOS(X)' `REAL(8) X' `REAL(8)' F77 and later
`CCOS(X)' `COMPLEX(4) `COMPLEX(4)' F77 and later
X'
`ZCOS(X)' `COMPLEX(8) `COMPLEX(8)' GNU extension
X'
`CDCOS(X)' `COMPLEX(8) `COMPLEX(8)' GNU extension
X'
_See also_:
Inverse function: *Note ACOS::

File: gfortran.info, Node: COSH, Next: COUNT, Prev: COS, Up: Intrinsic Procedures
6.41 `COSH' -- Hyperbolic cosine function
=========================================
_Description_:
`COSH(X)' computes the hyperbolic cosine of X.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`X = COSH(X)'
_Arguments_:
X The type shall be `REAL(*)'.
_Return value_:
The return value is of type `REAL(*)' and it is positive ( \cosh
(x) \geq 0 .
_Example_:
program test_cosh
real(8) :: x = 1.0_8
x = cosh(x)
end program test_cosh
_Specific names_:
Name Argument Return type Standard
`DCOSH(X)' `REAL(8) X' `REAL(8)' F77 and later
_See also_:
Inverse function: *Note ACOSH::

File: gfortran.info, Node: COUNT, Next: CPU_TIME, Prev: COSH, Up: Intrinsic Procedures
6.42 `COUNT' -- Count function
==============================
_Description_:
`COUNT(MASK [, DIM])' counts the number of `.TRUE.' elements of
MASK along the dimension of DIM. If DIM is omitted it is taken to
be `1'. DIM is a scaler of type `INTEGER' in the range of 1 /leq
DIM /leq n) where n is the rank of MASK.
_Standard_:
F95 and later
_Class_:
transformational function
_Syntax_:
`RESULT = COUNT(MASK [, DIM])'
_Arguments_:
MASK The type shall be `LOGICAL'.
DIM The type shall be `INTEGER'.
_Return value_:
The return value is of type `INTEGER' with rank equal to that of
MASK.
_Example_:
program test_count
integer, dimension(2,3) :: a, b
logical, dimension(2,3) :: mask
a = reshape( (/ 1, 2, 3, 4, 5, 6 /), (/ 2, 3 /))
b = reshape( (/ 0, 7, 3, 4, 5, 8 /), (/ 2, 3 /))
print '(3i3)', a(1,:)
print '(3i3)', a(2,:)
print *
print '(3i3)', b(1,:)
print '(3i3)', b(2,:)
print *
mask = a.ne.b
print '(3l3)', mask(1,:)
print '(3l3)', mask(2,:)
print *
print '(3i3)', count(mask)
print *
print '(3i3)', count(mask, 1)
print *
print '(3i3)', count(mask, 2)
end program test_count

File: gfortran.info, Node: CPU_TIME, Next: CSHIFT, Prev: COUNT, Up: Intrinsic Procedures
6.43 `CPU_TIME' -- CPU elapsed time in seconds
==============================================
_Description_:
Returns a `REAL(*)' value representing the elapsed CPU time in
seconds. This is useful for testing segments of code to determine
execution time.
_Standard_:
F95 and later
_Class_:
Subroutine
_Syntax_:
`CALL CPU_TIME(TIME)'
_Arguments_:
TIME The type shall be `REAL(*)' with `INTENT(OUT)'.
_Return value_:
None
_Example_:
program test_cpu_time
real :: start, finish
call cpu_time(start)
! put code to test here
call cpu_time(finish)
print '("Time = ",f6.3," seconds.")',finish-start
end program test_cpu_time
_See also_:
*Note SYSTEM_CLOCK::, *Note DATE_AND_TIME::

File: gfortran.info, Node: CSHIFT, Next: CTIME, Prev: CPU_TIME, Up: Intrinsic Procedures
6.44 `CSHIFT' -- Circular shift elements of an array
====================================================
_Description_:
`CSHIFT(ARRAY, SHIFT [, DIM])' performs a circular shift on
elements of ARRAY along the dimension of DIM. If DIM is omitted
it is taken to be `1'. DIM is a scaler of type `INTEGER' in the
range of 1 /leq DIM /leq n) where n is the rank of ARRAY. If the
rank of ARRAY is one, then all elements of ARRAY are shifted by
SHIFT places. If rank is greater than one, then all complete rank
one sections of ARRAY along the given dimension are shifted.
Elements shifted out one end of each rank one section are shifted
back in the other end.
_Standard_:
F95 and later
_Class_:
transformational function
_Syntax_:
`RESULT = CSHIFT(A, SHIFT [, DIM])'
_Arguments_:
ARRAY May be any type, not scaler.
SHIFT The type shall be `INTEGER'.
DIM The type shall be `INTEGER'.
_Return value_:
Returns an array of same type and rank as the ARRAY argument.
_Example_:
program test_cshift
integer, dimension(3,3) :: a
a = reshape( (/ 1, 2, 3, 4, 5, 6, 7, 8, 9 /), (/ 3, 3 /))
print '(3i3)', a(1,:)
print '(3i3)', a(2,:)
print '(3i3)', a(3,:)
a = cshift(a, SHIFT=(/1, 2, -1/), DIM=2)
print *
print '(3i3)', a(1,:)
print '(3i3)', a(2,:)
print '(3i3)', a(3,:)
end program test_cshift

File: gfortran.info, Node: CTIME, Next: DATE_AND_TIME, Prev: CSHIFT, Up: Intrinsic Procedures
6.45 `CTIME' -- Convert a time into a string
============================================
_Description_:
`CTIME' converts a system time value, such as returned by
`TIME8()', to a string of the form `Sat Aug 19 18:13:14 1995'.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL CTIME(TIME, RESULT)'.
`RESULT = CTIME(TIME)', (not recommended).
_Arguments_:
TIME The type shall be of type `INTEGER(KIND=8)'.
RESULT The type shall be of type `CHARACTER'.
_Return value_:
The converted date and time as a string.
_Example_:
program test_ctime
integer(8) :: i
character(len=30) :: date
i = time8()
! Do something, main part of the program
call ctime(i,date)
print *, 'Program was started on ', date
end program test_ctime
_See Also_:
*Note GMTIME::, *Note LTIME::, *Note TIME::, *Note TIME8::

File: gfortran.info, Node: DATE_AND_TIME, Next: DBLE, Prev: CTIME, Up: Intrinsic Procedures
6.46 `DATE_AND_TIME' -- Date and time subroutine
================================================
_Description_:
`DATE_AND_TIME(DATE, TIME, ZONE, VALUES)' gets the corresponding
date and time information from the real-time system clock. DATE is
`INTENT(OUT)' and has form ccyymmdd. TIME is `INTENT(OUT)' and
has form hhmmss.sss. ZONE is `INTENT(OUT)' and has form (+-)hhmm,
representing the difference with respect to Coordinated Universal
Time (UTC). Unavailable time and date parameters return blanks.
VALUES is `INTENT(OUT)' and provides the following:
`VALUE(1)': The year
`VALUE(2)': The month
`VALUE(3)': The day of the month
`VALUE(4)': Time difference with UTC
in minutes
`VALUE(5)': The hour of the day
`VALUE(6)': The minutes of the hour
`VALUE(7)': The seconds of the minute
`VALUE(8)': The milliseconds of the
second
_Standard_:
F95 and later
_Class_:
Subroutine
_Syntax_:
`CALL DATE_AND_TIME([DATE, TIME, ZONE, VALUES])'
_Arguments_:
DATE (Optional) The type shall be `CHARACTER(8)' or
larger.
TIME (Optional) The type shall be `CHARACTER(10)'
or larger.
ZONE (Optional) The type shall be `CHARACTER(5)' or
larger.
VALUES (Optional) The type shall be `INTEGER(8)'.
_Return value_:
None
_Example_:
program test_time_and_date
character(8) :: date
character(10) :: time
character(5) :: zone
integer,dimension(8) :: values
! using keyword arguments
call date_and_time(date,time,zone,values)
call date_and_time(DATE=date,ZONE=zone)
call date_and_time(TIME=time)
call date_and_time(VALUES=values)
print '(a,2x,a,2x,a)', date, time, zone
print '(8i5))', values
end program test_time_and_date
_See also_:
*Note CPU_TIME::, *Note SYSTEM_CLOCK::

File: gfortran.info, Node: DBLE, Next: DCMPLX, Prev: DATE_AND_TIME, Up: Intrinsic Procedures
6.47 `DBLE' -- Double conversion function
=========================================
_Description_:
`DBLE(X)' Converts X to double precision real type.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = DBLE(X)'
_Arguments_:
X The type shall be `INTEGER(*)', `REAL(*)',
or `COMPLEX(*)'.
_Return value_:
The return value is of type double precision real.
_Example_:
program test_dble
real :: x = 2.18
integer :: i = 5
complex :: z = (2.3,1.14)
print *, dble(x), dble(i), dble(z)
end program test_dble
_See also_:
*Note DFLOAT::, *Note FLOAT::, *Note REAL::

File: gfortran.info, Node: DCMPLX, Next: DFLOAT, Prev: DBLE, Up: Intrinsic Procedures
6.48 `DCMPLX' -- Double complex conversion function
===================================================
_Description_:
`DCMPLX(X [,Y])' returns a double complex number where X is
converted to the real component. If Y is present it is converted
to the imaginary component. If Y is not present then the
imaginary component is set to 0.0. If X is complex then Y must
not be present.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = DCMPLX(X [, Y])'
_Arguments_:
X The type may be `INTEGER(*)', `REAL(*)',
or `COMPLEX(*)'.
Y (Optional if X is not `COMPLEX(*)'.) May be
`INTEGER(*)' or `REAL(*)'.
_Return value_:
The return value is of type `COMPLEX(8)'
_Example_:
program test_dcmplx
integer :: i = 42
real :: x = 3.14
complex :: z
z = cmplx(i, x)
print *, dcmplx(i)
print *, dcmplx(x)
print *, dcmplx(z)
print *, dcmplx(x,i)
end program test_dcmplx

File: gfortran.info, Node: DFLOAT, Next: DIGITS, Prev: DCMPLX, Up: Intrinsic Procedures
6.49 `DFLOAT' -- Double conversion function
===========================================
_Description_:
`DFLOAT(X)' Converts X to double precision real type.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = DFLOAT(X)'
_Arguments_:
X The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type double precision real.
_Example_:
program test_dfloat
integer :: i = 5
print *, dfloat(i)
end program test_dfloat
_See also_:
*Note DBLE::, *Note FLOAT::, *Note REAL::

File: gfortran.info, Node: DIGITS, Next: DIM, Prev: DFLOAT, Up: Intrinsic Procedures
6.50 `DIGITS' -- Significant digits function
============================================
_Description_:
`DIGITS(X)' returns the number of significant digits of the
internal model representation of X. For example, on a system
using a 32-bit floating point representation, a default real
number would likely return 24.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = DIGITS(X)'
_Arguments_:
X The type may be `INTEGER(*)' or `REAL(*)'.
_Return value_:
The return value is of type `INTEGER'.
_Example_:
program test_digits
integer :: i = 12345
real :: x = 3.143
real(8) :: y = 2.33
print *, digits(i)
print *, digits(x)
print *, digits(y)
end program test_digits

File: gfortran.info, Node: DIM, Next: DOT_PRODUCT, Prev: DIGITS, Up: Intrinsic Procedures
6.51 `DIM' -- Positive difference
=================================
_Description_:
`DIM(X,Y)' returns the difference `X-Y' if the result is positive;
otherwise returns zero.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = DIM(X, Y)'
_Arguments_:
X The type shall be `INTEGER(*)' or `REAL(*)'
Y The type shall be the same type and kind as X.
_Return value_:
The return value is of type `INTEGER(*)' or `REAL(*)'.
_Example_:
program test_dim
integer :: i
real(8) :: x
i = dim(4, 15)
x = dim(4.345_8, 2.111_8)
print *, i
print *, x
end program test_dim
_Specific names_:
Name Argument Return type Standard
`IDIM(X,Y)' `INTEGER(4) `INTEGER(4)' F77 and later
X,Y'
`DDIM(X,Y)' `REAL(8) `REAL(8)' F77 and later
X,Y'

File: gfortran.info, Node: DOT_PRODUCT, Next: DPROD, Prev: DIM, Up: Intrinsic Procedures
6.52 `DOT_PRODUCT' -- Dot product function
==========================================
_Description_:
`DOT_PRODUCT(X,Y)' computes the dot product multiplication of two
vectors X and Y. The two vectors may be either numeric or logical
and must be arrays of rank one and of equal size. If the vectors
are `INTEGER(*)' or `REAL(*)', the result is `SUM(X*Y)'. If the
vectors are `COMPLEX(*)', the result is `SUM(CONJG(X)*Y)'. If the
vectors are `LOGICAL', the result is `ANY(X.AND.Y)'.
_Standard_:
F95 and later
_Class_:
transformational function
_Syntax_:
`RESULT = DOT_PRODUCT(X, Y)'
_Arguments_:
X The type shall be numeric or `LOGICAL', rank 1.
Y The type shall be numeric or `LOGICAL', rank 1.
_Return value_:
If the arguments are numeric, the return value is a scaler of
numeric type, `INTEGER(*)', `REAL(*)', or `COMPLEX(*)'. If the
arguments are `LOGICAL', the return value is `.TRUE.' or `.FALSE.'.
_Example_:
program test_dot_prod
integer, dimension(3) :: a, b
a = (/ 1, 2, 3 /)
b = (/ 4, 5, 6 /)
print '(3i3)', a
print *
print '(3i3)', b
print *
print *, dot_product(a,b)
end program test_dot_prod

File: gfortran.info, Node: DPROD, Next: DREAL, Prev: DOT_PRODUCT, Up: Intrinsic Procedures
6.53 `DPROD' -- Double product function
=======================================
_Description_:
`DPROD(X,Y)' returns the product `X*Y'.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = DPROD(X, Y)'
_Arguments_:
X The type shall be `REAL'.
Y The type shall be `REAL'.
_Return value_:
The return value is of type `REAL(8)'.
_Example_:
program test_dprod
real :: x = 5.2
real :: y = 2.3
real(8) :: d
d = dprod(x,y)
print *, d
end program test_dprod

File: gfortran.info, Node: DREAL, Next: DTIME, Prev: DPROD, Up: Intrinsic Procedures
6.54 `DREAL' -- Double real part function
=========================================
_Description_:
`DREAL(Z)' returns the real part of complex variable Z.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = DREAL(Z)'
_Arguments_:
Z The type shall be `COMPLEX(8)'.
_Return value_:
The return value is of type `REAL(8)'.
_Example_:
program test_dreal
complex(8) :: z = (1.3_8,7.2_8)
print *, dreal(z)
end program test_dreal
_See also_:
*Note AIMAG::

File: gfortran.info, Node: DTIME, Next: EOSHIFT, Prev: DREAL, Up: Intrinsic Procedures
6.55 `DTIME' -- Execution time subroutine (or function)
=======================================================
_Description_:
`DTIME(TARRAY, RESULT)' initially returns the number of seconds of
runtime since the start of the process's execution in RESULT.
TARRAY returns the user and system components of this time in
`TARRAY(1)' and `TARRAY(2)' respectively. RESULT is equal to
`TARRAY(1) + TARRAY(2)'.
Subsequent invocations of `DTIME' return values accumulated since
the previous invocation.
On some systems, the underlying timings are represented using
types with sufficiently small limits that overflows (wrap around)
are possible, such as 32-bit types. Therefore, the values returned
by this intrinsic might be, or become, negative, or numerically
less than previous values, during a single run of the compiled
program.
If `DTIME' is invoked as a function, it can not be invoked as a
subroutine, and vice versa.
TARRAY and RESULT are `INTENT(OUT)' and provide the following:
`TARRAY(1)': User time in seconds.
`TARRAY(2)': System time in seconds.
`RESULT': Run time since start in
seconds.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL DTIME(TARRAY, RESULT)'.
`RESULT = DTIME(TARRAY)', (not recommended).
_Arguments_:
TARRAY The type shall be `REAL, DIMENSION(2)'.
RESULT The type shall be `REAL'.
_Return value_:
Elapsed time in seconds since the start of program execution.
_Example_:
program test_dtime
integer(8) :: i, j
real, dimension(2) :: tarray
real :: result
call dtime(tarray, result)
print *, result
print *, tarray(1)
print *, tarray(2)
do i=1,100000000 ! Just a delay
j = i * i - i
end do
call dtime(tarray, result)
print *, result
print *, tarray(1)
print *, tarray(2)
end program test_dtime

File: gfortran.info, Node: EOSHIFT, Next: EPSILON, Prev: DTIME, Up: Intrinsic Procedures
6.56 `EOSHIFT' -- End-off shift elements of an array
====================================================
_Description_:
`EOSHIFT(ARRAY, SHIFT[,BOUNDARY, DIM])' performs an end-off shift
on elements of ARRAY along the dimension of DIM. If DIM is
omitted it is taken to be `1'. DIM is a scaler of type `INTEGER'
in the range of 1 /leq DIM /leq n) where n is the rank of ARRAY.
If the rank of ARRAY is one, then all elements of ARRAY are
shifted by SHIFT places. If rank is greater than one, then all
complete rank one sections of ARRAY along the given dimension are
shifted. Elements shifted out one end of each rank one section
are dropped. If BOUNDARY is present then the corresponding value
of from BOUNDARY is copied back in the other end. If BOUNDARY is
not present then the following are copied in depending on the type
of ARRAY.
_Array _Boundary Value_
Type_
Numeric 0 of the type and kind of ARRAY.
Logical `.FALSE.'.
Character(LEN)LEN blanks.
_Standard_:
F95 and later
_Class_:
transformational function
_Syntax_:
`RESULT = EOSHIFT(A, SHIFT [, BOUNDARY, DIM])'
_Arguments_:
ARRAY May be any type, not scaler.
SHIFT The type shall be `INTEGER'.
BOUNDARY Same type as ARRAY.
DIM The type shall be `INTEGER'.
_Return value_:
Returns an array of same type and rank as the ARRAY argument.
_Example_:
program test_eoshift
integer, dimension(3,3) :: a
a = reshape( (/ 1, 2, 3, 4, 5, 6, 7, 8, 9 /), (/ 3, 3 /))
print '(3i3)', a(1,:)
print '(3i3)', a(2,:)
print '(3i3)', a(3,:)
a = EOSHIFT(a, SHIFT=(/1, 2, 1/), BOUNDARY=-5, DIM=2)
print *
print '(3i3)', a(1,:)
print '(3i3)', a(2,:)
print '(3i3)', a(3,:)
end program test_eoshift

File: gfortran.info, Node: EPSILON, Next: ERF, Prev: EOSHIFT, Up: Intrinsic Procedures
6.57 `EPSILON' -- Epsilon function
==================================
_Description_:
`EPSILON(X)' returns a nearly negligible number relative to `1'.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = EPSILON(X)'
_Arguments_:
X The type shall be `REAL(*)'.
_Return value_:
The return value is of same type as the argument.
_Example_:
program test_epsilon
real :: x = 3.143
real(8) :: y = 2.33
print *, EPSILON(x)
print *, EPSILON(y)
end program test_epsilon

File: gfortran.info, Node: ERF, Next: ERFC, Prev: EPSILON, Up: Intrinsic Procedures
6.58 `ERF' -- Error function
============================
_Description_:
`ERF(X)' computes the error function of X.
_Standard_:
GNU Extension
_Class_:
Elemental function
_Syntax_:
`RESULT = ERF(X)'
_Arguments_:
X The type shall be `REAL(*)', and it shall be
scalar.
_Return value_:
The return value is a scalar of type `REAL(*)' and it is positive
( - 1 \leq erf (x) \leq 1 .
_Example_:
program test_erf
real(8) :: x = 0.17_8
x = erf(x)
end program test_erf
_Specific names_:
Name Argument Return type Standard
`DERF(X)' `REAL(8) X' `REAL(8)' GNU extension

File: gfortran.info, Node: ERFC, Next: ETIME, Prev: ERF, Up: Intrinsic Procedures
6.59 `ERFC' -- Error function
=============================
_Description_:
`ERFC(X)' computes the complementary error function of X.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = ERFC(X)'
_Arguments_:
X The type shall be `REAL(*)', and it shall be
scalar.
_Return value_:
The return value is a scalar of type `REAL(*)' and it is positive
( 0 \leq erfc (x) \leq 2 .
_Example_:
program test_erfc
real(8) :: x = 0.17_8
x = erfc(x)
end program test_erfc
_Specific names_:
Name Argument Return type Standard
`DERFC(X)' `REAL(8) X' `REAL(8)' GNU extension

File: gfortran.info, Node: ETIME, Next: EXIT, Prev: ERFC, Up: Intrinsic Procedures
6.60 `ETIME' -- Execution time subroutine (or function)
=======================================================
_Description_:
`ETIME(TARRAY, RESULT)' returns the number of seconds of runtime
since the start of the process's execution in RESULT. TARRAY
returns the user and system components of this time in `TARRAY(1)'
and `TARRAY(2)' respectively. RESULT is equal to `TARRAY(1) +
TARRAY(2)'.
On some systems, the underlying timings are represented using
types with sufficiently small limits that overflows (wrap around)
are possible, such as 32-bit types. Therefore, the values returned
by this intrinsic might be, or become, negative, or numerically
less than previous values, during a single run of the compiled
program.
If `ETIME' is invoked as a function, it can not be invoked as a
subroutine, and vice versa.
TARRAY and RESULT are `INTENT(OUT)' and provide the following:
`TARRAY(1)': User time in seconds.
`TARRAY(2)': System time in seconds.
`RESULT': Run time since start in seconds.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL ETIME(TARRAY, RESULT)'.
`RESULT = ETIME(TARRAY)', (not recommended).
_Arguments_:
TARRAY The type shall be `REAL, DIMENSION(2)'.
RESULT The type shall be `REAL'.
_Return value_:
Elapsed time in seconds since the start of program execution.
_Example_:
program test_etime
integer(8) :: i, j
real, dimension(2) :: tarray
real :: result
call ETIME(tarray, result)
print *, result
print *, tarray(1)
print *, tarray(2)
do i=1,100000000 ! Just a delay
j = i * i - i
end do
call ETIME(tarray, result)
print *, result
print *, tarray(1)
print *, tarray(2)
end program test_etime
_See also_:
*Note CPU_TIME::

File: gfortran.info, Node: EXIT, Next: EXP, Prev: ETIME, Up: Intrinsic Procedures
6.61 `EXIT' -- Exit the program with status.
============================================
_Description_:
`EXIT' causes immediate termination of the program with status.
If status is omitted it returns the canonical _success_ for the
system. All Fortran I/O units are closed.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL EXIT([STATUS])'
_Arguments_:
STATUS Shall be an `INTEGER' of the default kind.
_Return value_:
`STATUS' is passed to the parent process on exit.
_Example_:
program test_exit
integer :: STATUS = 0
print *, 'This program is going to exit.'
call EXIT(STATUS)
end program test_exit
_See also_:
*Note ABORT::, *Note KILL::

File: gfortran.info, Node: EXP, Next: EXPONENT, Prev: EXIT, Up: Intrinsic Procedures
6.62 `EXP' -- Exponential function
==================================
_Description_:
`EXP(X)' computes the base e exponential of X.
_Standard_:
F77 and later, has overloads that are GNU extensions
_Class_:
Elemental function
_Syntax_:
`RESULT = EXP(X)'
_Arguments_:
X The type shall be `REAL(*)' or `COMPLEX(*)'.
_Return value_:
The return value has same type and kind as X.
_Example_:
program test_exp
real :: x = 1.0
x = exp(x)
end program test_exp
_Specific names_:
Name Argument Return type Standard
`DEXP(X)' `REAL(8) X' `REAL(8)' F77 and later
`CEXP(X)' `COMPLEX(4) `COMPLEX(4)' F77 and later
X'
`ZEXP(X)' `COMPLEX(8) `COMPLEX(8)' GNU extension
X'
`CDEXP(X)' `COMPLEX(8) `COMPLEX(8)' GNU extension
X'

File: gfortran.info, Node: EXPONENT, Next: FDATE, Prev: EXP, Up: Intrinsic Procedures
6.63 `EXPONENT' -- Exponent function
====================================
_Description_:
`EXPONENT(X)' returns the value of the exponent part of X. If X is
zero the value returned is zero.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = EXPONENT(X)'
_Arguments_:
X The type shall be `REAL(*)'.
_Return value_:
The return value is of type default `INTEGER'.
_Example_:
program test_exponent
real :: x = 1.0
integer :: i
i = exponent(x)
print *, i
print *, exponent(0.0)
end program test_exponent

File: gfortran.info, Node: FDATE, Next: FGET, Prev: EXPONENT, Up: Intrinsic Procedures
6.64 `FDATE' -- Get the current time as a string
================================================
_Description_:
`FDATE(DATE)' returns the current date (using the same format as
`CTIME') in DATE. It is equivalent to `CALL CTIME(DATE, TIME())'.
If `FDATE' is invoked as a function, it can not be invoked as a
subroutine, and vice versa.
DATE is an `INTENT(OUT)' `CHARACTER' variable.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL FDATE(DATE)'.
`DATE = FDATE()', (not recommended).
_Arguments_:
DATE The type shall be of type `CHARACTER'.
_Return value_:
The current date as a string.
_Example_:
program test_fdate
integer(8) :: i, j
character(len=30) :: date
call fdate(date)
print *, 'Program started on ', date
do i = 1, 100000000 ! Just a delay
j = i * i - i
end do
call fdate(date)
print *, 'Program ended on ', date
end program test_fdate

File: gfortran.info, Node: FLOAT, Next: FLOOR, Prev: FGETC, Up: Intrinsic Procedures
6.65 `FLOAT' -- Convert integer to default real
===============================================
_Description_:
`FLOAT(I)' converts the integer I to a default real value.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = FLOAT(I)'
_Arguments_:
I The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type default `REAL'.
_Example_:
program test_float
integer :: i = 1
if (float(i) /= 1.) call abort
end program test_float
_See also_:
*Note DBLE::, *Note DFLOAT::, *Note REAL::

File: gfortran.info, Node: FGET, Next: FGETC, Prev: FDATE, Up: Intrinsic Procedures
6.66 `FGET' -- Read a single character in stream mode from stdin
================================================================
_Description_:
Read a single character in stream mode from stdin by bypassing
normal formatted output. Stream I/O should not be mixed with
normal record-oriented (formatted or unformatted) I/O on the same
unit; the results are unpredictable.
This intrinsic routine is provided for backwards compatibility with
`g77'. GNU Fortran provides the Fortran 2003 Stream facility.
Programmers should consider the use of new stream IO feature in
new code for future portability. See also *Note Fortran 2003
status::.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL FGET(C [, STATUS])'
_Arguments_:
C The type shall be `CHARACTER'.
STATUS (Optional) status flag of type `INTEGER'.
Returns 0 on success, -1
on end-of-file, and a
system specific positive error code otherwise.
_Example_:
PROGRAM test_fget
INTEGER, PARAMETER :: strlen = 100
INTEGER :: status, i = 1
CHARACTER(len=strlen) :: str = ""
WRITE (*,*) 'Enter text:'
DO
CALL fget(str(i:i), status)
if (status /= 0 .OR. i > strlen) exit
i = i + 1
END DO
WRITE (*,*) TRIM(str)
END PROGRAM
_See also_:
*Note FGETC::, *Note FPUT::, *Note FPUTC::

File: gfortran.info, Node: FGETC, Next: FLOAT, Prev: FGET, Up: Intrinsic Procedures
6.67 `FGETC' -- Read a single character in stream mode
======================================================
_Description_:
Read a single character in stream mode by bypassing normal
formatted output. Stream I/O should not be mixed with normal
record-oriented (formatted or unformatted) I/O on the same unit;
the results are unpredictable.
This intrinsic routine is provided for backwards compatibility with
`g77'. GNU Fortran provides the Fortran 2003 Stream facility.
Programmers should consider the use of new stream IO feature in
new code for future portability. See also *Note Fortran 2003
status::.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL FGETC(UNIT, C [, STATUS])'
_Arguments_:
UNIT The type shall be `INTEGER'.
C The type shall be `CHARACTER'.
STATUS (Optional) status flag of type `INTEGER'.
Returns 0 on success,
-1 on end-of-file and a system specific
positive error code otherwise.
_Example_:
PROGRAM test_fgetc
INTEGER :: fd = 42, status
CHARACTER :: c
OPEN(UNIT=fd, FILE="/etc/passwd", ACTION="READ", STATUS = "OLD")
DO
CALL fgetc(fd, c, status)
IF (status /= 0) EXIT
call fput(c)
END DO
CLOSE(UNIT=fd)
END PROGRAM
_See also_:
*Note FGET::, *Note FPUT::, *Note FPUTC::

File: gfortran.info, Node: FLOOR, Next: FLUSH, Prev: FLOAT, Up: Intrinsic Procedures
6.68 `FLOOR' -- Integer floor function
======================================
_Description_:
`FLOOR(X)' returns the greatest integer less than or equal to X.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = FLOOR(X [, KIND])'
_Arguments_:
X The type shall be `REAL(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
The return value is of type `INTEGER(KIND)'
_Example_:
program test_floor
real :: x = 63.29
real :: y = -63.59
print *, floor(x) ! returns 63
print *, floor(y) ! returns -64
end program test_floor
_See also_:
*Note CEILING::, *Note NINT::

File: gfortran.info, Node: FLUSH, Next: FNUM, Prev: FLOOR, Up: Intrinsic Procedures
6.69 `FLUSH' -- Flush I/O unit(s)
=================================
_Description_:
Flushes Fortran unit(s) currently open for output. Without the
optional argument, all units are flushed, otherwise just the unit
specified.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL FLUSH(UNIT)'
_Arguments_:
UNIT (Optional) The type shall be `INTEGER'.
_Note_:
Beginning with the Fortran 2003 standard, there is a `FLUSH'
statement that should be preferred over the `FLUSH' intrinsic.

File: gfortran.info, Node: FNUM, Next: FPUT, Prev: FLUSH, Up: Intrinsic Procedures
6.70 `FNUM' -- File number function
===================================
_Description_:
`FNUM(UNIT)' returns the POSIX file descriptor number
corresponding to the open Fortran I/O unit `UNIT'.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = FNUM(UNIT)'
_Arguments_:
UNIT The type shall be `INTEGER'.
_Return value_:
The return value is of type `INTEGER'
_Example_:
program test_fnum
integer :: i
open (unit=10, status = "scratch")
i = fnum(10)
print *, i
close (10)
end program test_fnum

File: gfortran.info, Node: FPUT, Next: FPUTC, Prev: FNUM, Up: Intrinsic Procedures
6.71 `FPUT' -- Write a single character in stream mode to stdout
================================================================
_Description_:
Write a single character in stream mode to stdout by bypassing
normal formatted output. Stream I/O should not be mixed with
normal record-oriented (formatted or unformatted) I/O on the same
unit; the results are unpredictable.
This intrinsic routine is provided for backwards compatibility with
`g77'. GNU Fortran provides the Fortran 2003 Stream facility.
Programmers should consider the use of new stream IO feature in
new code for future portability. See also *Note Fortran 2003
status::.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL FPUT(C [, STATUS])'
_Arguments_:
C The type shall be `CHARACTER'.
STATUS (Optional) status flag of type `INTEGER'.
Returns 0 on success,
-1 on end-of-file and a system specific
positive error code otherwise.
_Example_:
PROGRAM test_fput
CHARACTER(len=10) :: str = "gfortran"
INTEGER :: i
DO i = 1, len_trim(str)
CALL fput(str(i:i))
END DO
END PROGRAM
_See also_:
*Note FPUTC::, *Note FGET::, *Note FGETC::

File: gfortran.info, Node: FPUTC, Next: FRACTION, Prev: FPUT, Up: Intrinsic Procedures
6.72 `FPUTC' -- Write a single character in stream mode
=======================================================
_Description_:
Write a single character in stream mode by bypassing normal
formatted output. Stream I/O should not be mixed with normal
record-oriented (formatted or unformatted) I/O on the same unit;
the results are unpredictable.
This intrinsic routine is provided for backwards compatibility with
`g77'. GNU Fortran provides the Fortran 2003 Stream facility.
Programmers should consider the use of new stream IO feature in
new code for future portability. See also *Note Fortran 2003
status::.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL FPUTC(UNIT, C [, STATUS])'
_Arguments_:
UNIT The type shall be `INTEGER'.
C The type shall be `CHARACTER'.
STATUS (Optional) status flag of type `INTEGER'.
Returns 0 on success,
-1 on end-of-file and a system specific
positive error code otherwise.
_Example_:
PROGRAM test_fputc
CHARACTER(len=10) :: str = "gfortran"
INTEGER :: fd = 42, i
OPEN(UNIT = fd, FILE = "out", ACTION = "WRITE", STATUS="NEW")
DO i = 1, len_trim(str)
CALL fputc(fd, str(i:i))
END DO
CLOSE(fd)
END PROGRAM
_See also_:
*Note FPUT::, *Note FGET::, *Note FGETC::

File: gfortran.info, Node: FRACTION, Next: FREE, Prev: FPUTC, Up: Intrinsic Procedures
6.73 `FRACTION' -- Fractional part of the model representation
==============================================================
_Description_:
`FRACTION(X)' returns the fractional part of the model
representation of `X'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`Y = FRACTION(X)'
_Arguments_:
X The type of the argument shall be a `REAL'.
_Return value_:
The return value is of the same type and kind as the argument.
The fractional part of the model representation of `X' is returned;
it is `X * RADIX(X)**(-EXPONENT(X))'.
_Example_:
program test_fraction
real :: x
x = 178.1387e-4
print *, fraction(x), x * radix(x)**(-exponent(x))
end program test_fraction

File: gfortran.info, Node: FREE, Next: FSEEK, Prev: FRACTION, Up: Intrinsic Procedures
6.74 `FREE' -- Frees memory
===========================
_Description_:
Frees memory previously allocated by `MALLOC()'. The `FREE'
intrinsic is an extension intended to be used with Cray pointers,
and is provided in GNU Fortran to allow user to compile legacy
code. For new code using Fortran 95 pointers, the memory
de-allocation intrinsic is `DEALLOCATE'.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL FREE(PTR)'
_Arguments_:
PTR The type shall be `INTEGER'. It represents the
location of the memory that should be
de-allocated.
_Return value_:
None
_Example_:
See `MALLOC' for an example.
_See also_:
*Note MALLOC::

File: gfortran.info, Node: FSEEK, Next: FSTAT, Prev: FREE, Up: Intrinsic Procedures
6.75 `FSEEK' -- Low level file positioning subroutine
=====================================================
Not yet implemented in GNU Fortran.
_Description_:
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
_Arguments_:
_Return value_:
_Example_:
_Specific names_:
_See also_:
g77 features lacking in gfortran
(http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19292)

File: gfortran.info, Node: FSTAT, Next: FTELL, Prev: FSEEK, Up: Intrinsic Procedures
6.76 `FSTAT' -- Get file status
===============================
_Description_:
`FSTAT' is identical to *Note STAT::, except that information
about an already opened file is obtained.
The elements in `BUFF' are the same as described by *Note STAT::.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL FSTAT(UNIT, BUFF [, STATUS])'
_Arguments_:
UNIT An open I/O unit number of type `INTEGER'.
BUFF The type shall be `INTEGER(4), DIMENSION(13)'.
STATUS (Optional) status flag of type `INTEGER(4)'.
Returns 0 on success
and a system specific error code otherwise.
_Example_:
See *Note STAT:: for an example.
_See also_:
To stat a link: *Note LSTAT::, to stat a file: *Note STAT::

File: gfortran.info, Node: FTELL, Next: GERROR, Prev: FSTAT, Up: Intrinsic Procedures
6.77 `FTELL' -- Current stream position
=======================================
_Description_:
Retrieves the current position within an open file.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, function
_Syntax_:
`CALL FTELL(UNIT, OFFSET)'
`OFFSET = FTELL(UNIT)'
_Arguments_:
OFFSET Shall of type `INTEGER'.
UNIT Shall of type `INTEGER'.
_Return value_:
In either syntax, OFFSET is set to the current offset of unit
number UNIT, or to -1 if the unit is not currently open.
_Example_:
PROGRAM test_ftell
INTEGER :: i
OPEN(10, FILE="temp.dat")
CALL ftell(10,i)
WRITE(*,*) i
END PROGRAM
_See also_:
*Note FSEEK::

File: gfortran.info, Node: GERROR, Next: GETARG, Prev: FTELL, Up: Intrinsic Procedures
6.78 `GERROR' -- Get last system error message
==============================================
_Description_:
Returns the system error message corresponding to the last system
error. This resembles the functionality of `strerror(3)' in C.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL GERROR(RESULT)'
_Arguments_:
RESULT Shall of type `CHARACTER(*)'.
_Example_:
PROGRAM test_gerror
CHARACTER(len=100) :: msg
CALL gerror(msg)
WRITE(*,*) msg
END PROGRAM
_See also_:
*Note IERRNO::, *Note PERROR::

File: gfortran.info, Node: GETARG, Next: GET_COMMAND, Prev: GERROR, Up: Intrinsic Procedures
6.79 `GETARG' -- Get command line arguments
===========================================
_Description_:
Retrieve the Nth argument that was passed on the command line when
the containing program was invoked.
This intrinsic routine is provided for backwards compatibility with
GNU Fortran 77. In new code, programmers should consider the use
of the *Note GET_COMMAND_ARGUMENT:: intrinsic defined by the
Fortran 2003 standard.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL GETARG(N, ARG)'
_Arguments_:
N Shall be of type `INTEGER(4)', N \geq 0
ARG Shall be of type `CHARACTER(*)'.
_Return value_:
After `GETARG' returns, the ARG argument holds the Nth command
line argument. If ARG can not hold the argument, it is truncated
to fit the length of ARG. If there are less than N arguments
specified at the command line, ARG will be filled with blanks. If
N = 0, ARG is set to the name of the program (on systems that
support this feature).
_Example_:
PROGRAM test_getarg
INTEGER :: i
CHARACTER(len=32) :: arg
DO i = 1, iargc()
CALL getarg(i, arg)
WRITE (*,*) arg
END DO
END PROGRAM
_See also_:
GNU Fortran 77 compatibility function: *Note IARGC::
F2003 functions and subroutines: *Note GET_COMMAND::, *Note
GET_COMMAND_ARGUMENT::, *Note COMMAND_ARGUMENT_COUNT::

File: gfortran.info, Node: GET_COMMAND, Next: GET_COMMAND_ARGUMENT, Prev: GETARG, Up: Intrinsic Procedures
6.80 `GET_COMMAND' -- Get the entire command line
=================================================
_Description_:
Retrieve the entire command line that was used to invoke the
program.
_Standard_:
F2003
_Class_:
Subroutine
_Syntax_:
`CALL GET_COMMAND(CMD)'
_Arguments_:
CMD Shall be of type `CHARACTER(*)'.
_Return value_:
Stores the entire command line that was used to invoke the program
in ARG. If ARG is not large enough, the command will be truncated.
_Example_:
PROGRAM test_get_command
CHARACTER(len=255) :: cmd
CALL get_command(cmd)
WRITE (*,*) TRIM(cmd)
END PROGRAM
_See also_:
*Note GET_COMMAND_ARGUMENT::, *Note COMMAND_ARGUMENT_COUNT::

File: gfortran.info, Node: GET_COMMAND_ARGUMENT, Next: GETCWD, Prev: GET_COMMAND, Up: Intrinsic Procedures
6.81 `GET_COMMAND_ARGUMENT' -- Get command line arguments
=========================================================
_Description_:
Retrieve the Nth argument that was passed on the command line when
the containing program was invoked.
_Standard_:
F2003
_Class_:
Subroutine
_Syntax_:
`CALL GET_COMMAND_ARGUMENT(N, ARG)'
_Arguments_:
N Shall be of type `INTEGER(4)', N \geq 0
ARG Shall be of type `CHARACTER(*)'.
_Return value_:
After `GET_COMMAND_ARGUMENT' returns, the ARG argument holds the
Nth command line argument. If ARG can not hold the argument, it is
truncated to fit the length of ARG. If there are less than N
arguments specified at the command line, ARG will be filled with
blanks. If N = 0, ARG is set to the name of the program (on
systems that support this feature).
_Example_:
PROGRAM test_get_command_argument
INTEGER :: i
CHARACTER(len=32) :: arg
i = 0
DO
CALL get_command_argument(i, arg)
IF (LEN_TRIM(arg) == 0) EXIT
WRITE (*,*) TRIM(arg)
i = i+1
END DO
END PROGRAM
_See also_:
*Note GET_COMMAND::, *Note COMMAND_ARGUMENT_COUNT::

File: gfortran.info, Node: GETCWD, Next: GETENV, Prev: GET_COMMAND_ARGUMENT, Up: Intrinsic Procedures
6.82 `GETCWD' -- Get current working directory
==============================================
_Description_:
Get current working directory.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine.
_Syntax_:
`CALL GETCWD(CWD [, STATUS])'
_Arguments_:
CWD The type shall be `CHARACTER(*)'.
STATUS (Optional) status flag. Returns 0 on success,
a system specific and
non-zero error code otherwise.
_Example_:
PROGRAM test_getcwd
CHARACTER(len=255) :: cwd
CALL getcwd(cwd)
WRITE(*,*) TRIM(cwd)
END PROGRAM
_See also_:
*Note CHDIR::

File: gfortran.info, Node: GETENV, Next: GET_ENVIRONMENT_VARIABLE, Prev: GETCWD, Up: Intrinsic Procedures
6.83 `GETENV' -- Get an environmental variable
==============================================
_Description_:
Get the VALUE of the environmental variable ENVVAR.
This intrinsic routine is provided for backwards compatibility with
GNU Fortran 77. In new code, programmers should consider the use
of the *Note GET_ENVIRONMENT_VARIABLE:: intrinsic defined by the
Fortran 2003 standard.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL GETENV(ENVVAR, VALUE)'
_Arguments_:
ENVVAR Shall be of type `CHARACTER(*)'.
VALUE Shall be of type `CHARACTER(*)'.
_Return value_:
Stores the value of ENVVAR in VALUE. If VALUE is not large enough
to hold the data, it is truncated. If ENVVAR is not set, VALUE
will be filled with blanks.
_Example_:
PROGRAM test_getenv
CHARACTER(len=255) :: homedir
CALL getenv("HOME", homedir)
WRITE (*,*) TRIM(homedir)
END PROGRAM
_See also_:
*Note GET_ENVIRONMENT_VARIABLE::

File: gfortran.info, Node: GET_ENVIRONMENT_VARIABLE, Next: GETGID, Prev: GETENV, Up: Intrinsic Procedures
6.84 `GET_ENVIRONMENT_VARIABLE' -- Get an environmental variable
================================================================
_Description_:
Get the VALUE of the environmental variable ENVVAR.
_Standard_:
F2003
_Class_:
Subroutine
_Syntax_:
`CALL GET_ENVIRONMENT_VARIABLE(ENVVAR, VALUE)'
_Arguments_:
ENVVAR Shall be of type `CHARACTER(*)'.
VALUE Shall be of type `CHARACTER(*)'.
_Return value_:
Stores the value of ENVVAR in VALUE. If VALUE is not large enough
to hold the data, it is truncated. If ENVVAR is not set, VALUE
will be filled with blanks.
_Example_:
PROGRAM test_getenv
CHARACTER(len=255) :: homedir
CALL get_environment_variable("HOME", homedir)
WRITE (*,*) TRIM(homedir)
END PROGRAM

File: gfortran.info, Node: GETGID, Next: GETLOG, Prev: GET_ENVIRONMENT_VARIABLE, Up: Intrinsic Procedures
6.85 `GETGID' -- Group ID function
==================================
_Description_:
Returns the numerical group ID of the current process.
_Standard_:
GNU extension
_Class_:
function
_Syntax_:
`RESULT = GETGID()'
_Return value_:
The return value of `GETGID' is an `INTEGER' of the default kind.
_Example_:
See `GETPID' for an example.
_See also_:
*Note GETPID::, *Note GETUID::

File: gfortran.info, Node: GETLOG, Next: GETPID, Prev: GETGID, Up: Intrinsic Procedures
6.86 `GETLOG' -- Get login name
===============================
_Description_:
Gets the username under which the program is running.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL GETLOG(LOGIN)'
_Arguments_:
LOGIN Shall be of type `CHARACTER(*)'.
_Return value_:
Stores the current user name in LOGIN. (On systems where the
`getlogin(3)' function is not implemented, this will return a
blank string.)
_Example_:
PROGRAM TEST_GETLOG
CHARACTER(32) :: login
CALL GETLOG(login)
WRITE(*,*) login
END PROGRAM
_See also_:
*Note GETUID::

File: gfortran.info, Node: GETPID, Next: GETUID, Prev: GETLOG, Up: Intrinsic Procedures
6.87 `GETPID' -- Process ID function
====================================
_Description_:
Returns the numerical process identifier of the current process.
_Standard_:
GNU extension
_Class_:
function
_Syntax_:
`RESULT = GETPID()'
_Return value_:
The return value of `GETPID' is an `INTEGER' of the default kind.
_Example_:
program info
print *, "The current process ID is ", getpid()
print *, "Your numerical user ID is ", getuid()
print *, "Your numerical group ID is ", getgid()
end program info
_See also_:
*Note GETGID::, *Note GETUID::

File: gfortran.info, Node: GETUID, Next: GMTIME, Prev: GETPID, Up: Intrinsic Procedures
6.88 `GETUID' -- User ID function
=================================
_Description_:
Returns the numerical user ID of the current process.
_Standard_:
GNU extension
_Class_:
function
_Syntax_:
`RESULT = GETUID()'
_Return value_:
The return value of `GETUID' is an `INTEGER' of the default kind.
_Example_:
See `GETPID' for an example.
_See also_:
*Note GETPID::, *Note GETLOG::

File: gfortran.info, Node: GMTIME, Next: HOSTNM, Prev: GETUID, Up: Intrinsic Procedures
6.89 `GMTIME' -- Convert time to GMT info
=========================================
_Description_:
Given a system time value STIME (as provided by the `TIME8()'
intrinsic), fills TARRAY with values extracted from it appropriate
to the UTC time zone (Universal Coordinated Time, also known in
some countries as GMT, Greenwich Mean Time), using `gmtime(3)'.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL GMTIME(STIME, TARRAY)'
_Arguments_:
STIME An `INTEGER(*)' scalar expression
corresponding to a system time, with
`INTENT(IN)'.
TARRAY A default `INTEGER' array with 9 elements,
with `INTENT(OUT)'.
_Return value_:
The elements of TARRAY are assigned as follows:
1. Seconds after the minute, range 0-59 or 0-61 to allow for leap
seconds
2. Minutes after the hour, range 0-59
3. Hours past midnight, range 0-23
4. Day of month, range 0-31
5. Number of months since January, range 0-12
6. Years since 1900
7. Number of days since Sunday, range 0-6
8. Days since January 1
9. Daylight savings indicator: positive if daylight savings is in
effect, zero if not, and negative if the information is
not available.
_See also_:
*Note CTIME::, *Note LTIME::, *Note TIME::, *Note TIME8::

File: gfortran.info, Node: HOSTNM, Next: HUGE, Prev: GMTIME, Up: Intrinsic Procedures
6.90 `HOSTNM' -- Get system host name
=====================================
_Description_:
Retrieves the host name of the system on which the program is
running.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, function
_Syntax_:
`CALL HOSTNM(NAME[, STATUS])'
`STATUS = HOSTNM(NAME)'
_Arguments_:
NAME Shall of type `CHARACTER(*)'.
STATUS (Optional) status flag of type `INTEGER'.
Returns 0 on success, or
a system specific error
code otherwise.
_Return value_:
In either syntax, NAME is set to the current hostname if it can be
obtained, or to a blank string otherwise.

File: gfortran.info, Node: HUGE, Next: IACHAR, Prev: HOSTNM, Up: Intrinsic Procedures
6.91 `HUGE' -- Largest number of a kind
=======================================
_Description_:
`HUGE(X)' returns the largest number that is not an infinity in
the model of the type of `X'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = HUGE(X)'
_Arguments_:
X Shall be of type `REAL' or `INTEGER'.
_Return value_:
The return value is of the same type and kind as X
_Example_:
program test_huge_tiny
print *, huge(0), huge(0.0), huge(0.0d0)
print *, tiny(0.0), tiny(0.0d0)
end program test_huge_tiny

File: gfortran.info, Node: IACHAR, Next: IAND, Prev: HUGE, Up: Intrinsic Procedures
6.92 `IACHAR' -- Code in ASCII collating sequence
=================================================
_Description_:
`IACHAR(C)' returns the code for the ASCII character in the first
character position of `C'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = IACHAR(C)'
_Arguments_:
C Shall be a scalar `CHARACTER', with
`INTENT(IN)'
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
program test_iachar
integer i
i = iachar(' ')
end program test_iachar
_Note_:
See *Note ICHAR:: for a discussion of converting between numerical
values and formatted string representations.
_See also_:
*Note ACHAR::, *Note CHAR::, *Note ICHAR::

File: gfortran.info, Node: IAND, Next: IARGC, Prev: IACHAR, Up: Intrinsic Procedures
6.93 `IAND' -- Bitwise logical and
==================================
_Description_:
Bitwise logical `AND'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = IAND(I, J)'
_Arguments_:
I The type shall be `INTEGER(*)'.
J The type shall be `INTEGER(*)', of the same
kind as I. (As a GNU extension, different
kinds are also permitted.)
_Return value_:
The return type is `INTEGER(*)', of the same kind as the
arguments. (If the argument kinds differ, it is of the same kind
as the larger argument.)
_Example_:
PROGRAM test_iand
INTEGER :: a, b
DATA a / Z'F' /, b / Z'3' /
WRITE (*,*) IAND(a, b)
END PROGRAM
_See also_:
*Note IOR::, *Note IEOR::, *Note IBITS::, *Note IBSET::, *Note
IBCLR::, *Note NOT::

File: gfortran.info, Node: IARGC, Next: IBCLR, Prev: IAND, Up: Intrinsic Procedures
6.94 `IARGC' -- Get the number of command line arguments
========================================================
_Description_:
`IARGC()' returns the number of arguments passed on the command
line when the containing program was invoked.
This intrinsic routine is provided for backwards compatibility with
GNU Fortran 77. In new code, programmers should consider the use
of the *Note COMMAND_ARGUMENT_COUNT:: intrinsic defined by the
Fortran 2003 standard.
_Standard_:
GNU extension
_Class_:
Non-elemental Function
_Syntax_:
`RESULT = IARGC()'
_Arguments_:
None.
_Return value_:
The number of command line arguments, type `INTEGER(4)'.
_Example_:
See *Note GETARG::
_See also_:
GNU Fortran 77 compatibility subroutine: *Note GETARG::
F2003 functions and subroutines: *Note GET_COMMAND::, *Note
GET_COMMAND_ARGUMENT::, *Note COMMAND_ARGUMENT_COUNT::

File: gfortran.info, Node: IBCLR, Next: IBITS, Prev: IARGC, Up: Intrinsic Procedures
6.95 `IBCLR' -- Clear bit
=========================
_Description_:
`IBCLR' returns the value of I with the bit at position POS set to
zero.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = IBCLR(I, POS)'
_Arguments_:
I The type shall be `INTEGER(*)'.
POS The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(*)' and of the same kind as I.
_See also_:
*Note IBITS::, *Note IBSET::, *Note IAND::, *Note IOR::, *Note
IEOR::, *Note MVBITS::

File: gfortran.info, Node: IBITS, Next: IBSET, Prev: IBCLR, Up: Intrinsic Procedures
6.96 `IBITS' -- Bit extraction
==============================
_Description_:
`IBITS' extracts a field of length LEN from I, starting from bit
position POS and extending left for LEN bits. The result is
right-justified and the remaining bits are zeroed. The value of
`POS+LEN' must be less than or equal to the value `BIT_SIZE(I)'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = IBITS(I, POS, LEN)'
_Arguments_:
I The type shall be `INTEGER(*)'.
POS The type shall be `INTEGER(*)'.
LEN The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(*)' and of the same kind as I.
_See also_:
*Note BIT_SIZE::, *Note IBCLR::, *Note IBSET::, *Note IAND::,
*Note IOR::, *Note IEOR::

File: gfortran.info, Node: IBSET, Next: ICHAR, Prev: IBITS, Up: Intrinsic Procedures
6.97 `IBSET' -- Set bit
=======================
_Description_:
`IBSET' returns the value of I with the bit at position POS set to
one.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = IBSET(I, POS)'
_Arguments_:
I The type shall be `INTEGER(*)'.
POS The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(*)' and of the same kind as I.
_See also_:
*Note IBCLR::, *Note IBITS::, *Note IAND::, *Note IOR::, *Note
IEOR::, *Note MVBITS::

File: gfortran.info, Node: ICHAR, Next: IDATE, Prev: IBSET, Up: Intrinsic Procedures
6.98 `ICHAR' -- Character-to-integer conversion function
========================================================
_Description_:
`ICHAR(C)' returns the code for the character in the first
character position of `C' in the system's native character set.
The correspondence between characters and their codes is not
necessarily the same across different GNU Fortran implementations.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ICHAR(C)'
_Arguments_:
C Shall be a scalar `CHARACTER', with
`INTENT(IN)'
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
program test_ichar
integer i
i = ichar(' ')
end program test_ichar
_Note_:
No intrinsic exists to convert between a numeric value and a
formatted character string representation - for instance, given the
`CHARACTER' value `'154'', obtaining an `INTEGER' or `REAL' value
with the value 154, or vice versa. Instead, this functionality is
provided by internal-file I/O, as in the following example:
program read_val
integer value
character(len=10) string, string2
string = '154'
! Convert a string to a numeric value
read (string,'(I10)') value
print *, value
! Convert a value to a formatted string
write (string2,'(I10)') value
print *, string2
end program read_val
_See also_:
*Note ACHAR::, *Note CHAR::, *Note IACHAR::

File: gfortran.info, Node: IDATE, Next: IEOR, Prev: ICHAR, Up: Intrinsic Procedures
6.99 `IDATE' -- Get current local time subroutine (day/month/year)
==================================================================
_Description_:
`IDATE(TARRAY)' Fills TARRAY with the numerical values at the
current local time. The day (in the range 1-31), month (in the
range 1-12), and year appear in elements 1, 2, and 3 of TARRAY,
respectively. The year has four significant digits.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL IDATE(TARRAY)'
_Arguments_:
TARRAY The type shall be `INTEGER, DIMENSION(3)' and
the kind shall be the default integer kind.
_Return value_:
Does not return.
_Example_:
program test_idate
integer, dimension(3) :: tarray
call idate(tarray)
print *, tarray(1)
print *, tarray(2)
print *, tarray(3)
end program test_idate

File: gfortran.info, Node: IEOR, Next: IERRNO, Prev: IDATE, Up: Intrinsic Procedures
6.100 `IEOR' -- Bitwise logical exclusive or
============================================
_Description_:
`IEOR' returns the bitwise boolean exclusive-OR of I and J.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = IEOR(I, J)'
_Arguments_:
I The type shall be `INTEGER(*)'.
J The type shall be `INTEGER(*)', of the same
kind as I. (As a GNU extension, different
kinds are also permitted.)
_Return value_:
The return type is `INTEGER(*)', of the same kind as the
arguments. (If the argument kinds differ, it is of the same kind
as the larger argument.)
_See also_:
*Note IOR::, *Note IAND::, *Note IBITS::, *Note IBSET::, *Note
IBCLR::, *Note NOT::

File: gfortran.info, Node: IERRNO, Next: INDEX, Prev: IEOR, Up: Intrinsic Procedures
6.101 `IERRNO' -- Get the last system error number
==================================================
_Description_:
Returns the last system error number, as given by the C `errno()'
function.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = IERRNO()'
_Arguments_:
None.
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_See also_:
*Note PERROR::

File: gfortran.info, Node: INDEX, Next: INT, Prev: IERRNO, Up: Intrinsic Procedures
6.102 `INDEX' -- Position of a substring within a string
========================================================
_Description_:
Returns the position of the start of the first occurrence of string
SUBSTRING as a substring in STRING, counting from one. If
SUBSTRING is not present in STRING, zero is returned. If the BACK
argument is present and true, the return value is the start of the
last occurrence rather than the first.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = INDEX(STRING, SUBSTRING [, BACK])'
_Arguments_:
STRING Shall be a scalar `CHARACTER(*)', with
`INTENT(IN)'
SUBSTRING Shall be a scalar `CHARACTER(*)', with
`INTENT(IN)'
BACK (Optional) Shall be a scalar `LOGICAL(*)', with
`INTENT(IN)'
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_See also_:
*Note SCAN::, *Note VERIFY::

File: gfortran.info, Node: INT, Next: INT2, Prev: INDEX, Up: Intrinsic Procedures
6.103 `INT' -- Convert to integer type
======================================
_Description_:
Convert to integer type
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = INT(A [, KIND))'
_Arguments_:
A Shall be of type `INTEGER(*)',
`REAL(*)', or `COMPLEX(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
These functions return a `INTEGER(*)' variable or array under the
following rules:
(A)
If A is of type `INTEGER(*)', `INT(A) = A'
(B)
If A is of type `REAL(*)' and |A| < 1, `INT(A)' equals `0'.
If |A| \geq 1, then `INT(A)' equals the largest integer that
does not exceed the range of A and whose sign is the same as
the sign of A.
(C)
If A is of type `COMPLEX(*)', rule B is applied to the real
part of A.
_Example_:
program test_int
integer :: i = 42
complex :: z = (-3.7, 1.0)
print *, int(i)
print *, int(z), int(z,8)
end program
_Specific names_:
Name Argument Return type Standard
`IFIX(A)' `REAL(4) A' `INTEGER' F77 and later
`IDINT(A)' `REAL(8) A' `INTEGER' F77 and later

File: gfortran.info, Node: INT2, Next: INT8, Prev: INT, Up: Intrinsic Procedures
6.104 `INT2' -- Convert to 16-bit integer type
==============================================
_Description_:
Convert to a `KIND=2' integer type. This is equivalent to the
standard `INT' intrinsic with an optional argument of `KIND=2',
and is only included for backwards compatibility.
The `SHORT' intrinsic is equivalent to `INT2'.
_Standard_:
GNU extension.
_Class_:
Elemental function
_Syntax_:
`RESULT = INT2(A)'
_Arguments_:
A Shall be of type `INTEGER(*)',
`REAL(*)', or `COMPLEX(*)'.
_Return value_:
The return value is a `INTEGER(2)' variable.
_See also_:
*Note INT::, *Note INT8::, *Note LONG::

File: gfortran.info, Node: INT8, Next: IOR, Prev: INT2, Up: Intrinsic Procedures
6.105 `INT8' -- Convert to 64-bit integer type
==============================================
_Description_:
Convert to a `KIND=8' integer type. This is equivalent to the
standard `INT' intrinsic with an optional argument of `KIND=8',
and is only included for backwards compatibility.
_Standard_:
GNU extension.
_Class_:
Elemental function
_Syntax_:
`RESULT = INT8(A)'
_Arguments_:
A Shall be of type `INTEGER(*)',
`REAL(*)', or `COMPLEX(*)'.
_Return value_:
The return value is a `INTEGER(8)' variable.
_See also_:
*Note INT::, *Note INT2::, *Note LONG::

File: gfortran.info, Node: IOR, Next: IRAND, Prev: INT8, Up: Intrinsic Procedures
6.106 `IOR' -- Bitwise logical or
=================================
_Description_:
`IEOR' returns the bitwise boolean OR of I and J.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = IEOR(I, J)'
_Arguments_:
I The type shall be `INTEGER(*)'.
J The type shall be `INTEGER(*)', of the same
kind as I. (As a GNU extension, different
kinds are also permitted.)
_Return value_:
The return type is `INTEGER(*)', of the same kind as the
arguments. (If the argument kinds differ, it is of the same kind
as the larger argument.)
_See also_:
*Note IEOR::, *Note IAND::, *Note IBITS::, *Note IBSET::, *Note
IBCLR::, *Note NOT::

File: gfortran.info, Node: IRAND, Next: ISATTY, Prev: IOR, Up: Intrinsic Procedures
6.107 `IRAND' -- Integer pseudo-random number
=============================================
_Description_:
`IRAND(FLAG)' returns a pseudo-random number from a uniform
distribution between 0 and a system-dependent limit (which is in
most cases 2147483647). If FLAG is 0, the next number in the
current sequence is returned; if FLAG is 1, the generator is
restarted by `CALL SRAND(0)'; if FLAG has any other value, it is
used as a new seed with `SRAND'.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = IRAND(FLAG)'
_Arguments_:
FLAG Shall be a scalar `INTEGER' of kind 4.
_Return value_:
The return value is of `INTEGER(kind=4)' type.
_Example_:
program test_irand
integer,parameter :: seed = 86456
call srand(seed)
print *, irand(), irand(), irand(), irand()
print *, irand(seed), irand(), irand(), irand()
end program test_irand

File: gfortran.info, Node: ISATTY, Next: ISHFT, Prev: IRAND, Up: Intrinsic Procedures
6.108 `ISATTY' -- Whether a unit is a terminal device.
======================================================
_Description_:
Determine whether a unit is connected to a terminal device.
_Standard_:
GNU extension.
_Class_:
Non-elemental function.
_Syntax_:
`RESULT = ISATTY(UNIT)'
_Arguments_:
UNIT Shall be a scalar `INTEGER(*)'.
_Return value_:
Returns `.TRUE.' if the UNIT is connected to a terminal device,
`.FALSE.' otherwise.
_Example_:
PROGRAM test_isatty
INTEGER(kind=1) :: unit
DO unit = 1, 10
write(*,*) isatty(unit=unit)
END DO
END PROGRAM
_See also_:
*Note TTYNAM::

File: gfortran.info, Node: ISHFT, Next: ISHFTC, Prev: ISATTY, Up: Intrinsic Procedures
6.109 `ISHFT' -- Shift bits
===========================
_Description_:
`ISHFT' returns a value corresponding to I with all of the bits
shifted SHIFT places. A value of SHIFT greater than zero
corresponds to a left shift, a value of zero corresponds to no
shift, and a value less than zero corresponds to a right shift.
If the absolute value of SHIFT is greater than `BIT_SIZE(I)', the
value is undefined. Bits shifted out from the left end or right
end are lost; zeros are shifted in from the opposite end.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ISHFT(I, SHIFT)'
_Arguments_:
I The type shall be `INTEGER(*)'.
SHIFT The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(*)' and of the same kind as I.
_See also_:
*Note ISHFTC::

File: gfortran.info, Node: ISHFTC, Next: ITIME, Prev: ISHFT, Up: Intrinsic Procedures
6.110 `ISHFTC' -- Shift bits circularly
=======================================
_Description_:
`ISHFTC' returns a value corresponding to I with the rightmost
SIZE bits shifted circularly SHIFT places; that is, bits shifted
out one end are shifted into the opposite end. A value of SHIFT
greater than zero corresponds to a left shift, a value of zero
corresponds to no shift, and a value less than zero corresponds to
a right shift. The absolute value of SHIFT must be less than
SIZE. If the SIZE argument is omitted, it is taken to be
equivalent to `BIT_SIZE(I)'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = ISHFTC(I, SHIFT [, SIZE])'
_Arguments_:
I The type shall be `INTEGER(*)'.
SHIFT The type shall be `INTEGER(*)'.
SIZE (Optional) The type shall be `INTEGER(*)'; the
value must be greater than zero and less than
or equal to `BIT_SIZE(I)'.
_Return value_:
The return value is of type `INTEGER(*)' and of the same kind as I.
_See also_:
*Note ISHFT::

File: gfortran.info, Node: ITIME, Next: KILL, Prev: ISHFTC, Up: Intrinsic Procedures
6.111 `ITIME' -- Get current local time subroutine (hour/minutes/seconds)
=========================================================================
_Description_:
`IDATE(TARRAY)' Fills TARRAY with the numerical values at the
current local time. The hour (in the range 1-24), minute (in the
range 1-60), and seconds (in the range 1-60) appear in elements 1,
2, and 3 of TARRAY, respectively.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL ITIME(TARRAY)'
_Arguments_:
TARRAY The type shall be `INTEGER, DIMENSION(3)' and
the kind shall be the default integer kind.
_Return value_:
Does not return.
_Example_:
program test_itime
integer, dimension(3) :: tarray
call itime(tarray)
print *, tarray(1)
print *, tarray(2)
print *, tarray(3)
end program test_itime

File: gfortran.info, Node: KILL, Next: KIND, Prev: ITIME, Up: Intrinsic Procedures
6.112 `KILL' -- Send a signal to a process
==========================================
_Description_:
_Standard_:
Sends the signal specified by SIGNAL to the process PID. See
`kill(2)'.
_Class_:
Subroutine
_Syntax_:
`CALL KILL(PID, SIGNAL [, STATUS])'
_Arguments_:
PID Shall be a scalar `INTEGER', with `INTENT(IN)'
SIGNAL Shall be a scalar `INTEGER', with `INTENT(IN)'
STATUS (Optional) status flag of type `INTEGER(4)' or
`INTEGER(8)'. Returns
0 on success, or a
system-specific error code otherwise.
_See also_:
*Note ABORT::, *Note EXIT::

File: gfortran.info, Node: KIND, Next: LBOUND, Prev: KILL, Up: Intrinsic Procedures
6.113 `KIND' -- Kind of an entity
=================================
_Description_:
`KIND(X)' returns the kind value of the entity X.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`K = KIND(X)'
_Arguments_:
X Shall be of type `LOGICAL', `INTEGER', `REAL',
`COMPLEX' or `CHARACTER'.
_Return value_:
The return value is a scalar of type `INTEGER' and of the default
integer kind.
_Example_:
program test_kind
integer,parameter :: kc = kind(' ')
integer,parameter :: kl = kind(.true.)
print *, "The default character kind is ", kc
print *, "The default logical kind is ", kl
end program test_kind

File: gfortran.info, Node: LBOUND, Next: LEN, Prev: KIND, Up: Intrinsic Procedures
6.114 `LBOUND' -- Lower dimension bounds of an array
====================================================
_Description_:
Returns the lower bounds of an array, or a single lower bound
along the DIM dimension.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = LBOUND(ARRAY [, DIM])'
_Arguments_:
ARRAY Shall be an array, of any type.
DIM (Optional) Shall be a scalar `INTEGER(*)'.
_Return value_:
If DIM is absent, the result is an array of the lower bounds of
ARRAY. If DIM is present, the result is a scalar corresponding to
the lower bound of the array along that dimension. If ARRAY is an
expression rather than a whole array or array structure component,
or if it has a zero extent along the relevant dimension, the lower
bound is taken to be 1.
_See also_:
*Note UBOUND::

File: gfortran.info, Node: LEN, Next: LEN_TRIM, Prev: LBOUND, Up: Intrinsic Procedures
6.115 `LEN' -- Length of a character entity
===========================================
_Description_:
Returns the length of a character string. If STRING is an array,
the length of an element of STRING is returned. Note that STRING
need not be defined when this intrinsic is invoked, since only the
length, not the content, of STRING is needed.
_Standard_:
F77 and later
_Class_:
Inquiry function
_Syntax_:
`L = LEN(STRING)'
_Arguments_:
STRING Shall be a scalar or array of type
`CHARACTER(*)', with `INTENT(IN)'
_Return value_:
The return value is an `INTEGER' of the default kind.
_See also_:
*Note LEN_TRIM::, *Note ADJUSTL::, *Note ADJUSTR::

File: gfortran.info, Node: LEN_TRIM, Next: LGE, Prev: LEN, Up: Intrinsic Procedures
6.116 `LEN_TRIM' -- Length of a character entity without trailing blank characters
==================================================================================
_Description_:
Returns the length of a character string, ignoring any trailing
blanks.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = LEN_TRIM(STRING)'
_Arguments_:
STRING Shall be a scalar of type `CHARACTER(*)', with
`INTENT(IN)'
_Return value_:
The return value is an `INTEGER' of the default kind.
_See also_:
*Note LEN::, *Note ADJUSTL::, *Note ADJUSTR::

File: gfortran.info, Node: LGE, Next: LGT, Prev: LEN_TRIM, Up: Intrinsic Procedures
6.117 `LGE' -- Lexical greater than or equal
============================================
_Description_:
Determines whether one string is lexically greater than or equal to
another string, where the two strings are interpreted as containing
ASCII character codes. If the String A and String B are not the
same length, the shorter is compared as if spaces were appended to
it to form a value that has the same length as the longer.
In general, the lexical comparison intrinsics `LGE', `LGT', `LLE',
and `LLT' differ from the corresponding intrinsic operators
`.GE.', `.GT.', `.LE.', and `.LT.', in that the latter use the
processor's character ordering (which is not ASCII on some
targets), whereas the former always use the ASCII ordering.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = LGE(STRING_A, STRING_B)'
_Arguments_:
STRING_A Shall be of default `CHARACTER' type.
STRING_B Shall be of default `CHARACTER' type.
_Return value_:
Returns `.TRUE.' if `STRING_A >= STRING_B', and `.FALSE.'
otherwise, based on the ASCII ordering.
_See also_:
*Note LGT::, *Note LLE::, *Note LLT::

File: gfortran.info, Node: LGT, Next: LINK, Prev: LGE, Up: Intrinsic Procedures
6.118 `LGT' -- Lexical greater than
===================================
_Description_:
Determines whether one string is lexically greater than another
string, where the two strings are interpreted as containing ASCII
character codes. If the String A and String B are not the same
length, the shorter is compared as if spaces were appended to it
to form a value that has the same length as the longer.
In general, the lexical comparison intrinsics `LGE', `LGT', `LLE',
and `LLT' differ from the corresponding intrinsic operators
`.GE.', `.GT.', `.LE.', and `.LT.', in that the latter use the
processor's character ordering (which is not ASCII on some
targets), whereas the former always use the ASCII ordering.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = LGT(STRING_A, STRING_B)'
_Arguments_:
STRING_A Shall be of default `CHARACTER' type.
STRING_B Shall be of default `CHARACTER' type.
_Return value_:
Returns `.TRUE.' if `STRING_A > STRING_B', and `.FALSE.'
otherwise, based on the ASCII ordering.
_See also_:
*Note LGE::, *Note LLE::, *Note LLT::

File: gfortran.info, Node: LINK, Next: LLE, Prev: LGT, Up: Intrinsic Procedures
6.119 `LINK' -- Create a hard link
==================================
_Description_:
Makes a (hard) link from file PATH1 to PATH2. A null character
(`CHAR(0)') can be used to mark the end of the names in PATH1 and
PATH2; otherwise, trailing blanks in the file names are ignored.
If the STATUS argument is supplied, it contains 0 on success or a
nonzero error code upon return; see `link(2)'.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL LINK(PATH1, PATH2 [, STATUS])'
`STATUS = LINK(PATH1, PATH2)'
_Arguments_:
PATH1 Shall be of default `CHARACTER' type.
PATH2 Shall be of default `CHARACTER' type.
STATUS (Optional) Shall be of default `INTEGER' type.
_See also_:
*Note SYMLNK::, *Note UNLINK::

File: gfortran.info, Node: LLE, Next: LLT, Prev: LINK, Up: Intrinsic Procedures
6.120 `LLE' -- Lexical less than or equal
=========================================
_Description_:
Determines whether one string is lexically less than or equal to
another string, where the two strings are interpreted as
containing ASCII character codes. If the String A and String B
are not the same length, the shorter is compared as if spaces were
appended to it to form a value that has the same length as the
longer.
In general, the lexical comparison intrinsics `LGE', `LGT', `LLE',
and `LLT' differ from the corresponding intrinsic operators
`.GE.', `.GT.', `.LE.', and `.LT.', in that the latter use the
processor's character ordering (which is not ASCII on some
targets), whereas the former always use the ASCII ordering.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = LLE(STRING_A, STRING_B)'
_Arguments_:
STRING_A Shall be of default `CHARACTER' type.
STRING_B Shall be of default `CHARACTER' type.
_Return value_:
Returns `.TRUE.' if `STRING_A <= STRING_B', and `.FALSE.'
otherwise, based on the ASCII ordering.
_See also_:
*Note LGE::, *Note LGT::, *Note LLT::

File: gfortran.info, Node: LLT, Next: LNBLNK, Prev: LLE, Up: Intrinsic Procedures
6.121 `LLT' -- Lexical less than
================================
_Description_:
Determines whether one string is lexically less than another
string, where the two strings are interpreted as containing ASCII
character codes. If the String A and String B are not the same
length, the shorter is compared as if spaces were appended to it
to form a value that has the same length as the longer.
In general, the lexical comparison intrinsics `LGE', `LGT', `LLE',
and `LLT' differ from the corresponding intrinsic operators
`.GE.', `.GT.', `.LE.', and `.LT.', in that the latter use the
processor's character ordering (which is not ASCII on some
targets), whereas the former always use the ASCII ordering.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = LLT(STRING_A, STRING_B)'
_Arguments_:
STRING_A Shall be of default `CHARACTER' type.
STRING_B Shall be of default `CHARACTER' type.
_Return value_:
Returns `.TRUE.' if `STRING_A < STRING_B', and `.FALSE.'
otherwise, based on the ASCII ordering.
_See also_:
*Note LGE::, *Note LGT::, *Note LLE::

File: gfortran.info, Node: LNBLNK, Next: LOC, Prev: LLT, Up: Intrinsic Procedures
6.122 `LNBLNK' -- Index of the last non-blank character in a string
===================================================================
_Description_:
Returns the length of a character string, ignoring any trailing
blanks. This is identical to the standard `LEN_TRIM' intrinsic,
and is only included for backwards compatibility.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = LNBLNK(STRING)'
_Arguments_:
STRING Shall be a scalar of type `CHARACTER(*)', with
`INTENT(IN)'
_Return value_:
The return value is of `INTEGER(kind=4)' type.
_See also_:
*Note INDEX::, *Note LEN_TRIM::

File: gfortran.info, Node: LOC, Next: LOG, Prev: LNBLNK, Up: Intrinsic Procedures
6.123 `LOC' -- Returns the address of a variable
================================================
_Description_:
`LOC(X)' returns the address of X as an integer.
_Standard_:
GNU extension
_Class_:
Inquiry function
_Syntax_:
`RESULT = LOC(X)'
_Arguments_:
X Variable of any type.
_Return value_:
The return value is of type `INTEGER', with a `KIND' corresponding
to the size (in bytes) of a memory address on the target machine.
_Example_:
program test_loc
integer :: i
real :: r
i = loc(r)
print *, i
end program test_loc

File: gfortran.info, Node: LOG, Next: LOG10, Prev: LOC, Up: Intrinsic Procedures
6.124 `LOG' -- Logarithm function
=================================
_Description_:
`LOG(X)' computes the logarithm of X.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = LOG(X)'
_Arguments_:
X The type shall be `REAL(*)' or `COMPLEX(*)'.
_Return value_:
The return value is of type `REAL(*)' or `COMPLEX(*)'. The kind
type parameter is the same as X.
_Example_:
program test_log
real(8) :: x = 1.0_8
complex :: z = (1.0, 2.0)
x = log(x)
z = log(z)
end program test_log
_Specific names_:
Name Argument Return type Standard
`ALOG(X)' `REAL(4) X' `REAL(4)' f95, gnu
`DLOG(X)' `REAL(8) X' `REAL(8)' f95, gnu
`CLOG(X)' `COMPLEX(4) `COMPLEX(4)' f95, gnu
X'
`ZLOG(X)' `COMPLEX(8) `COMPLEX(8)' f95, gnu
X'
`CDLOG(X)' `COMPLEX(8) `COMPLEX(8)' f95, gnu
X'

File: gfortran.info, Node: LOG10, Next: LOGICAL, Prev: LOG, Up: Intrinsic Procedures
6.125 `LOG10' -- Base 10 logarithm function
===========================================
_Description_:
`LOG10(X)' computes the base 10 logarithm of X.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = LOG10(X)'
_Arguments_:
X The type shall be `REAL(*)'.
_Return value_:
The return value is of type `REAL(*)' or `COMPLEX(*)'. The kind
type parameter is the same as X.
_Example_:
program test_log10
real(8) :: x = 10.0_8
x = log10(x)
end program test_log10
_Specific names_:
Name Argument Return type Standard
`ALOG10(X)' `REAL(4) X' `REAL(4)' F95 and later
`DLOG10(X)' `REAL(8) X' `REAL(8)' F95 and later

File: gfortran.info, Node: LOGICAL, Next: LONG, Prev: LOG10, Up: Intrinsic Procedures
6.126 `LOGICAL' -- Convert to logical type
==========================================
_Description_:
Converts one kind of `LOGICAL' variable to another.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = LOGICAL(L [, KIND])'
_Arguments_:
L The type shall be `LOGICAL(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
The return value is a `LOGICAL' value equal to L, with a kind
corresponding to KIND, or of the default logical kind if KIND is
not given.
_See also_:
*Note INT::, *Note REAL::, *Note CMPLX::

File: gfortran.info, Node: LONG, Next: LSHIFT, Prev: LOGICAL, Up: Intrinsic Procedures
6.127 `LONG' -- Convert to integer type
=======================================
_Description_:
Convert to a `KIND=4' integer type, which is the same size as a C
`long' integer. This is equivalent to the standard `INT'
intrinsic with an optional argument of `KIND=4', and is only
included for backwards compatibility.
_Standard_:
GNU extension.
_Class_:
Elemental function
_Syntax_:
`RESULT = LONG(A)'
_Arguments_:
A Shall be of type `INTEGER(*)',
`REAL(*)', or `COMPLEX(*)'.
_Return value_:
The return value is a `INTEGER(4)' variable.
_See also_:
*Note INT::, *Note INT2::, *Note INT8::

File: gfortran.info, Node: LSHIFT, Next: LSTAT, Prev: LONG, Up: Intrinsic Procedures
6.128 `LSHIFT' -- Left shift bits
=================================
_Description_:
`LSHIFT' returns a value corresponding to I with all of the bits
shifted left by SHIFT places. If the absolute value of SHIFT is
greater than `BIT_SIZE(I)', the value is undefined. Bits shifted
out from the left end are lost; zeros are shifted in from the
opposite end.
This function has been superseded by the `ISHFT' intrinsic, which
is standard in Fortran 95 and later.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = LSHIFT(I, SHIFT)'
_Arguments_:
I The type shall be `INTEGER(*)'.
SHIFT The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(*)' and of the same kind as I.
_See also_:
*Note ISHFT::, *Note ISHFTC::, *Note RSHIFT::

File: gfortran.info, Node: LSTAT, Next: LTIME, Prev: LSHIFT, Up: Intrinsic Procedures
6.129 `LSTAT' -- Get file status
================================
_Description_:
`LSTAT' is identical to *Note STAT::, except that if path is a
symbolic link, then the link itself is statted, not the file that
it refers to.
The elements in `BUFF' are the same as described by *Note STAT::.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL LSTAT(FILE, BUFF [, STATUS])'
_Arguments_:
FILE The type shall be `CHARACTER(*)', a valid path
within the file system.
BUFF The type shall be `INTEGER(4), DIMENSION(13)'.
STATUS (Optional) status flag of type `INTEGER(4)'.
Returns 0 on success
and a system specific error code otherwise.
_Example_:
See *Note STAT:: for an example.
_See also_:
To stat an open file: *Note FSTAT::, to stat a file: *Note STAT::

File: gfortran.info, Node: LTIME, Next: MALLOC, Prev: LSTAT, Up: Intrinsic Procedures
6.130 `LTIME' -- Convert time to local time info
================================================
_Description_:
Given a system time value STIME (as provided by the `TIME8()'
intrinsic), fills TARRAY with values extracted from it appropriate
to the local time zone using `localtime(3)'.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL LTIME(STIME, TARRAY)'
_Arguments_:
STIME An `INTEGER(*)' scalar expression
corresponding to a system time, with
`INTENT(IN)'.
TARRAY A default `INTEGER' array with 9 elements,
with `INTENT(OUT)'.
_Return value_:
The elements of TARRAY are assigned as follows:
1. Seconds after the minute, range 0-59 or 0-61 to allow for leap
seconds
2. Minutes after the hour, range 0-59
3. Hours past midnight, range 0-23
4. Day of month, range 0-31
5. Number of months since January, range 0-12
6. Years since 1900
7. Number of days since Sunday, range 0-6
8. Days since January 1
9. Daylight savings indicator: positive if daylight savings is in
effect, zero if not, and negative if the information is
not available.
_See also_:
*Note CTIME::, *Note GMTIME::, *Note TIME::, *Note TIME8::

File: gfortran.info, Node: MALLOC, Next: MATMUL, Prev: LTIME, Up: Intrinsic Procedures
6.131 `MALLOC' -- Allocate dynamic memory
=========================================
_Description_:
`MALLOC(SIZE)' allocates SIZE bytes of dynamic memory and returns
the address of the allocated memory. The `MALLOC' intrinsic is an
extension intended to be used with Cray pointers, and is provided
in GNU Fortran to allow the user to compile legacy code. For new
code using Fortran 95 pointers, the memory allocation intrinsic is
`ALLOCATE'.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`PTR = MALLOC(SIZE)'
_Arguments_:
SIZE The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(K)', with K such that
variables of type `INTEGER(K)' have the same size as C pointers
(`sizeof(void *)').
_Example_:
The following example demonstrates the use of `MALLOC' and `FREE'
with Cray pointers. This example is intended to run on 32-bit
systems, where the default integer kind is suitable to store
pointers; on 64-bit systems, ptr_x would need to be declared as
`integer(kind=8)'.
program test_malloc
integer i
integer ptr_x
real*8 x(*), z
pointer(ptr_x,x)
ptr_x = malloc(20*8)
do i = 1, 20
x(i) = sqrt(1.0d0 / i)
end do
z = 0
do i = 1, 20
z = z + x(i)
print *, z
end do
call free(ptr_x)
end program test_malloc
_See also_:
*Note FREE::

File: gfortran.info, Node: MATMUL, Next: MAX, Prev: MALLOC, Up: Intrinsic Procedures
6.132 `MATMUL' -- matrix multiplication
=======================================
_Description_:
Performs a matrix multiplication on numeric or logical arguments.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = MATMUL(MATRIX_A, MATRIX_B)'
_Arguments_:
MATRIX_A An array of `INTEGER(*)',
`REAL(*)', `COMPLEX(*)', or
`LOGICAL(*)' type, with a rank of one or two.
MATRIX_B An array of `INTEGER(*)',
`REAL(*)', or `COMPLEX(*)' type if
MATRIX_A is of a numeric type; otherwise,
an array of `LOGICAL(*)' type. The
rank shall be one or two, and the first (or
only) dimension of MATRIX_B shall be
equal to the last (or only)
dimension of MATRIX_A.
_Return value_:
The matrix product of MATRIX_A and MATRIX_B. The type and kind of
the result follow the usual type and kind promotion rules, as for
the `*' or `.AND.' operators.
_See also_:

File: gfortran.info, Node: MAX, Next: MAXEXPONENT, Prev: MATMUL, Up: Intrinsic Procedures
6.133 `MAX' -- Maximum value of an argument list
================================================
_Description_:
Returns the argument with the largest (most positive) value.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = MAX(A1, A2 [, A3 [, ...]])'
_Arguments_:
A1 The type shall be `INTEGER(*)' or
`REAL(*)'.
A2, A3, An expression of the same type and kind
... as A1. (As a GNU
extension, arguments of different
kinds are permitted.)
_Return value_:
The return value corresponds to the maximum value among the
arguments, and has the same type and kind as the first argument.
_Specific names_:
Name Argument Return type Standard
`MAX0(I)' `INTEGER(4) `INTEGER(4)' F77 and later
I'
`AMAX0(I)' `INTEGER(4) `REAL(MAX(X))'F77 and later
I'
`MAX1(X)' `REAL(*) X' `INT(MAX(X))' F77 and later
`AMAX1(X)' `REAL(4) `REAL(4)' F77 and later
X'
`DMAX1(X)' `REAL(8) `REAL(8)' F77 and later
X'
_See also_:
*Note MAXLOC:: *Note MAXVAL::, *Note MIN::

File: gfortran.info, Node: MAXEXPONENT, Next: MAXLOC, Prev: MAX, Up: Intrinsic Procedures
6.134 `MAXEXPONENT' -- Maximum exponent of a real kind
======================================================
_Description_:
`MAXEXPONENT(X)' returns the maximum exponent in the model of the
type of `X'.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = MAXEXPONENT(X)'
_Arguments_:
X Shall be of type `REAL'.
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
program exponents
real(kind=4) :: x
real(kind=8) :: y
print *, minexponent(x), maxexponent(x)
print *, minexponent(y), maxexponent(y)
end program exponents

File: gfortran.info, Node: MAXLOC, Next: MAXVAL, Prev: MAXEXPONENT, Up: Intrinsic Procedures
6.135 `MAXLOC' -- Location of the maximum value within an array
===============================================================
_Description_:
Determines the location of the element in the array with the
maximum value, or, if the DIM argument is supplied, determines the
locations of the maximum element along each row of the array in the
DIM direction. If MASK is present, only the elements for which
MASK is `.TRUE.' are considered. If more than one element in the
array has the maximum value, the location returned is that of the
first such element in array element order. If the array has zero
size, or all of the elements of MASK are `.FALSE.', then the
result is an array of zeroes. Similarly, if DIM is supplied and
all of the elements of MASK along a given row are zero, the result
value for that row is zero.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = MAXLOC(ARRAY, DIM [, MASK])'
`RESULT = MAXLOC(ARRAY [, MASK])'
_Arguments_:
ARRAY Shall be an array of type `INTEGER(*)',
`REAL(*)', or `CHARACTER(*)'.
DIM (Optional) Shall be a scalar of type
`INTEGER(*)', with a value
between one and the rank of
ARRAY, inclusive. It may not be an
optional dummy argument.
MASK Shall be an array of type `LOGICAL(*)',
and conformable with ARRAY.
_Return value_:
If DIM is absent, the result is a rank-one array with a length
equal to the rank of ARRAY. If DIM is present, the result is an
array with a rank one less than the rank of ARRAY, and a size
corresponding to the size of ARRAY with the DIM dimension removed.
If DIM is present and ARRAY has a rank of one, the result is a
scalar. In all cases, the result is of default `INTEGER' type.
_See also_:
*Note MAX::, *Note MAXVAL::

File: gfortran.info, Node: MAXVAL, Next: MCLOCK, Prev: MAXLOC, Up: Intrinsic Procedures
6.136 `MAXVAL' -- Maximum value of an array
===========================================
_Description_:
Determines the maximum value of the elements in an array value,
or, if the DIM argument is supplied, determines the maximum value
along each row of the array in the DIM direction. If MASK is
present, only the elements for which MASK is `.TRUE.' are
considered. If the array has zero size, or all of the elements of
MASK are `.FALSE.', then the result is the most negative number of
the type and kind of ARRAY if ARRAY is numeric, or a string of
nulls if ARRAY is of character type.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = MAXVAL(ARRAY, DIM [, MASK])'
`RESULT = MAXVAL(ARRAY [, MASK])'
_Arguments_:
ARRAY Shall be an array of type `INTEGER(*)',
`REAL(*)', or `CHARACTER(*)'.
DIM (Optional) Shall be a scalar of type
`INTEGER(*)', with a value
between one and the rank of
ARRAY, inclusive. It may not be an
optional dummy argument.
MASK Shall be an array of type `LOGICAL(*)',
and conformable with ARRAY.
_Return value_:
If DIM is absent, or if ARRAY has a rank of one, the result is a
scalar. If DIM is present, the result is an array with a rank one
less than the rank of ARRAY, and a size corresponding to the size
of ARRAY with the DIM dimension removed. In all cases, the result
is of the same type and kind as ARRAY.
_See also_:
*Note MAX::, *Note MAXLOC::

File: gfortran.info, Node: MCLOCK, Next: MCLOCK8, Prev: MAXVAL, Up: Intrinsic Procedures
6.137 `MCLOCK' -- Time function
===============================
_Description_:
Returns the number of clock ticks since the start of the process,
based on the UNIX function `clock(3)'.
This intrinsic is not fully portable, such as to systems with
32-bit `INTEGER' types but supporting times wider than 32 bits.
Therefore, the values returned by this intrinsic might be, or
become, negative, or numerically less than previous values, during
a single run of the compiled program.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = MCLOCK()'
_Return value_:
The return value is a scalar of type `INTEGER(4)', equal to the
number of clock ticks since the start of the process, or `-1' if
the system does not support `clock(3)'.
_See also_:
*Note CTIME::, *Note GMTIME::, *Note LTIME::, *Note MCLOCK::,
*Note TIME::

File: gfortran.info, Node: MCLOCK8, Next: MERGE, Prev: MCLOCK, Up: Intrinsic Procedures
6.138 `MCLOCK8' -- Time function (64-bit)
=========================================
_Description_:
Returns the number of clock ticks since the start of the process,
based on the UNIX function `clock(3)'.
_Warning:_ this intrinsic does not increase the range of the timing
values over that returned by `clock(3)'. On a system with a 32-bit
`clock(3)', `MCLOCK8()' will return a 32-bit value, even though it
is converted to a 64-bit `INTEGER(8)' value. That means overflows
of the 32-bit value can still occur. Therefore, the values
returned by this intrinsic might be or become negative or
numerically less than previous values during a single run of the
compiled program.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = MCLOCK8()'
_Return value_:
The return value is a scalar of type `INTEGER(8)', equal to the
number of clock ticks since the start of the process, or `-1' if
the system does not support `clock(3)'.
_See also_:
*Note CTIME::, *Note GMTIME::, *Note LTIME::, *Note MCLOCK::,
*Note TIME8::

File: gfortran.info, Node: MERGE, Next: MIN, Prev: MCLOCK8, Up: Intrinsic Procedures
6.139 `MERGE' -- Merge variables
================================
_Description_:
Select values from two arrays according to a logical mask. The
result is equal to TSOURCE if MASK is `.TRUE.', or equal to
FSOURCE if it is `.FALSE.'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = MERGE(TSOURCE, FSOURCE, MASK)'
_Arguments_:
TSOURCE May be of any type.
FSOURCE Shall be of the same type and type parameters
as TSOURCE.
MASK Shall be of type `LOGICAL(*)'.
_Return value_:
The result is of the same type and type parameters as TSOURCE.

File: gfortran.info, Node: MIN, Next: MINEXPONENT, Prev: MERGE, Up: Intrinsic Procedures
6.140 `MIN' -- Minimum value of an argument list
================================================
_Description_:
Returns the argument with the smallest (most negative) value.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = MIN(A1, A2 [, A3, ...])'
_Arguments_:
A1 The type shall be `INTEGER(*)' or
`REAL(*)'.
A2, A3, An expression of the same type and kind
... as A1. (As a GNU
extension, arguments of different
kinds are permitted.)
_Return value_:
The return value corresponds to the maximum value among the
arguments, and has the same type and kind as the first argument.
_Specific names_:
Name Argument Return type Standard
`MIN0(I)' `INTEGER(4) `INTEGER(4)' F77 and later
I'
`AMIN0(I)' `INTEGER(4) `REAL(MIN(X))'F77 and later
I'
`MIN1(X)' `REAL(*) X' `INT(MIN(X))' F77 and later
`AMIN1(X)' `REAL(4) `REAL(4)' F77 and later
X'
`DMIN1(X)' `REAL(8) `REAL(8)' F77 and later
X'
_See also_:
*Note MAX::, *Note MINLOC::, *Note MINVAL::

File: gfortran.info, Node: MINEXPONENT, Next: MINLOC, Prev: MIN, Up: Intrinsic Procedures
6.141 `MINEXPONENT' -- Minimum exponent of a real kind
======================================================
_Description_:
`MINEXPONENT(X)' returns the minimum exponent in the model of the
type of `X'.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = MINEXPONENT(X)'
_Arguments_:
X Shall be of type `REAL'.
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
See `MAXEXPONENT' for an example.

File: gfortran.info, Node: MINLOC, Next: MINVAL, Prev: MINEXPONENT, Up: Intrinsic Procedures
6.142 `MINLOC' -- Location of the minimum value within an array
===============================================================
_Description_:
Determines the location of the element in the array with the
minimum value, or, if the DIM argument is supplied, determines the
locations of the minimum element along each row of the array in the
DIM direction. If MASK is present, only the elements for which
MASK is `.TRUE.' are considered. If more than one element in the
array has the minimum value, the location returned is that of the
first such element in array element order. If the array has zero
size, or all of the elements of MASK are `.FALSE.', then the
result is an array of zeroes. Similarly, if DIM is supplied and
all of the elements of MASK along a given row are zero, the result
value for that row is zero.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = MINLOC(ARRAY, DIM [, MASK])'
`RESULT = MINLOC(ARRAY [, MASK])'
_Arguments_:
ARRAY Shall be an array of type `INTEGER(*)',
`REAL(*)', or `CHARACTER(*)'.
DIM (Optional) Shall be a scalar of type
`INTEGER(*)', with a value
between one and the rank of
ARRAY, inclusive. It may not be an
optional dummy argument.
MASK Shall be an array of type `LOGICAL(*)',
and conformable with ARRAY.
_Return value_:
If DIM is absent, the result is a rank-one array with a length
equal to the rank of ARRAY. If DIM is present, the result is an
array with a rank one less than the rank of ARRAY, and a size
corresponding to the size of ARRAY with the DIM dimension removed.
If DIM is present and ARRAY has a rank of one, the result is a
scalar. In all cases, the result is of default `INTEGER' type.
_See also_:
*Note MIN::, *Note MINVAL::

File: gfortran.info, Node: MINVAL, Next: MOD, Prev: MINLOC, Up: Intrinsic Procedures
6.143 `MINVAL' -- Minimum value of an array
===========================================
_Description_:
Determines the minimum value of the elements in an array value,
or, if the DIM argument is supplied, determines the minimum value
along each row of the array in the DIM direction. If MASK is
present, only the elements for which MASK is `.TRUE.' are
considered. If the array has zero size, or all of the elements of
MASK are `.FALSE.', then the result is `HUGE(ARRAY)' if ARRAY is
numeric, or a string of `CHAR(255)' characters if ARRAY is of
character type.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = MINVAL(ARRAY, DIM [, MASK])'
`RESULT = MINVAL(ARRAY [, MASK])'
_Arguments_:
ARRAY Shall be an array of type `INTEGER(*)',
`REAL(*)', or `CHARACTER(*)'.
DIM (Optional) Shall be a scalar of type
`INTEGER(*)', with a value
between one and the rank of
ARRAY, inclusive. It may not be an
optional dummy argument.
MASK Shall be an array of type `LOGICAL(*)',
and conformable with ARRAY.
_Return value_:
If DIM is absent, or if ARRAY has a rank of one, the result is a
scalar. If DIM is present, the result is an array with a rank one
less than the rank of ARRAY, and a size corresponding to the size
of ARRAY with the DIM dimension removed. In all cases, the result
is of the same type and kind as ARRAY.
_See also_:
*Note MIN::, *Note MINLOC::

File: gfortran.info, Node: MOD, Next: MODULO, Prev: MINVAL, Up: Intrinsic Procedures
6.144 `MOD' -- Remainder function
=================================
_Description_:
`MOD(A,P)' computes the remainder of the division of A by P. It is
calculated as `A - (INT(A/P) * P)'.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = MOD(A, P)'
_Arguments_:
A Shall be a scalar of type `INTEGER' or `REAL'
P Shall be a scalar of the same type as A and not
equal to zero
_Return value_:
The kind of the return value is the result of cross-promoting the
kinds of the arguments.
_Example_:
program test_mod
print *, mod(17,3)
print *, mod(17.5,5.5)
print *, mod(17.5d0,5.5)
print *, mod(17.5,5.5d0)
print *, mod(-17,3)
print *, mod(-17.5,5.5)
print *, mod(-17.5d0,5.5)
print *, mod(-17.5,5.5d0)
print *, mod(17,-3)
print *, mod(17.5,-5.5)
print *, mod(17.5d0,-5.5)
print *, mod(17.5,-5.5d0)
end program test_mod
_Specific names_:
Name Arguments Return type Standard
`AMOD(A,P)' `REAL(4)' `REAL(4)' F95 and later
`DMOD(A,P)' `REAL(8)' `REAL(8)' F95 and later

File: gfortran.info, Node: MODULO, Next: MOVE_ALLOC, Prev: MOD, Up: Intrinsic Procedures
6.145 `MODULO' -- Modulo function
=================================
_Description_:
`MODULO(A,P)' computes the A modulo P.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = MODULO(A, P)'
_Arguments_:
A Shall be a scalar of type `INTEGER' or `REAL'
P Shall be a scalar of the same type and kind as
A
_Return value_:
The type and kind of the result are those of the arguments.
If A and P are of type `INTEGER':
`MODULO(A,P)' has the value R such that `A=Q*P+R', where Q is
an integer and R is between 0 (inclusive) and P (exclusive).
If A and P are of type `REAL':
`MODULO(A,P)' has the value of `A - FLOOR (A / P) * P'.
In all cases, if P is zero the result is processor-dependent.
_Example_:
program test_modulo
print *, modulo(17,3)
print *, modulo(17.5,5.5)
print *, modulo(-17,3)
print *, modulo(-17.5,5.5)
print *, modulo(17,-3)
print *, modulo(17.5,-5.5)
end program

File: gfortran.info, Node: MOVE_ALLOC, Next: MVBITS, Prev: MODULO, Up: Intrinsic Procedures
6.146 `MOVE_ALLOC' -- Move allocation from one object to another
================================================================
_Description_:
`MOVE_ALLOC(SRC, DEST)' moves the allocation from SRC to DEST.
SRC will become deallocated in the process.
_Standard_:
F2003 and later
_Class_:
Subroutine
_Syntax_:
`CALL MOVE_ALLOC(SRC, DEST)'
_Arguments_:
SRC `ALLOCATABLE', `INTENT(INOUT)', may be
of any type and kind.
DEST `ALLOCATABLE', `INTENT(OUT)', shall be
of the same type, kind and rank
as SRC
_Return value_:
None
_Example_:
program test_move_alloc
integer, allocatable :: a(:), b(:)
allocate(a(3))
a = [ 1, 2, 3 ]
call move_alloc(a, b)
print *, allocated(a), allocated(b)
print *, b
end program test_move_alloc

File: gfortran.info, Node: MVBITS, Next: NEAREST, Prev: MOVE_ALLOC, Up: Intrinsic Procedures
6.147 `MVBITS' -- Move bits from one integer to another
=======================================================
_Description_:
Moves LEN bits from positions FROMPOS through `FROMPOS+LEN-1' of
FROM to positions TOPOS through `TOPOS+LEN-1' of TO. The portion
of argument TO not affected by the movement of bits is unchanged.
The values of `FROMPOS+LEN-1' and `TOPOS+LEN-1' must be less than
`BIT_SIZE(FROM)'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = MVBITS(FROM, FROMPOS, LEN, TO, TOPOS)'
_Arguments_:
FROM The type shall be `INTEGER(*)'.
FROMPOS The type shall be `INTEGER(*)'.
LEN The type shall be `INTEGER(*)'.
TO The type shall be `INTEGER(*)', of the
same kind as FROM.
TOPOS The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(*)' and of the same kind as
FROM.
_See also_:
*Note IBCLR::, *Note IBSET::, *Note IBITS::, *Note IAND::, *Note
IOR::, *Note IEOR::

File: gfortran.info, Node: NEAREST, Next: NEW_LINE, Prev: MVBITS, Up: Intrinsic Procedures
6.148 `NEAREST' -- Nearest representable number
===============================================
_Description_:
`NEAREST(X, S)' returns the processor-representable number nearest
to `X' in the direction indicated by the sign of `S'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = NEAREST(X, S)'
_Arguments_:
X Shall be of type `REAL'.
S (Optional) shall be of type `REAL' and not
equal to zero.
_Return value_:
The return value is of the same type as `X'. If `S' is positive,
`NEAREST' returns the processor-representable number greater than
`X' and nearest to it. If `S' is negative, `NEAREST' returns the
processor-representable number smaller than `X' and nearest to it.
_Example_:
program test_nearest
real :: x, y
x = nearest(42.0, 1.0)
y = nearest(42.0, -1.0)
write (*,"(3(G20.15))") x, y, x - y
end program test_nearest

File: gfortran.info, Node: NEW_LINE, Next: NINT, Prev: NEAREST, Up: Intrinsic Procedures
6.149 `NEW_LINE' -- New line character
======================================
_Description_:
`NEW_LINE(C)' returns the new-line character.
_Standard_:
F2003 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = NEW_LINE(C)'
_Arguments_:
C The argument shall be a scalar or array of the
type `CHARACTER'.
_Return value_:
Returns a CHARACTER scalar of length one with the new-line
character of the same kind as parameter C.
_Example_:
program newline
implicit none
write(*,'(A)') 'This is record 1.'//NEW_LINE('A')//'This is record 2.'
end program newline

File: gfortran.info, Node: NINT, Next: NOT, Prev: NEW_LINE, Up: Intrinsic Procedures
6.150 `NINT' -- Nearest whole number
====================================
_Description_:
`NINT(X)' rounds its argument to the nearest whole number.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = NINT(X)'
_Arguments_:
X The type of the argument shall be `REAL'.
_Return value_:
Returns A with the fractional portion of its magnitude eliminated
by rounding to the nearest whole number and with its sign
preserved, converted to an `INTEGER' of the default kind.
_Example_:
program test_nint
real(4) x4
real(8) x8
x4 = 1.234E0_4
x8 = 4.321_8
print *, nint(x4), idnint(x8)
end program test_nint
_Specific names_:
Name Argument Standard
`IDNINT(X)' `REAL(8)' F95 and later
_See also_:
*Note CEILING::, *Note FLOOR::

File: gfortran.info, Node: NOT, Next: NULL, Prev: NINT, Up: Intrinsic Procedures
6.151 `NOT' -- Logical negation
===============================
_Description_:
`NOT' returns the bitwise boolean inverse of I.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = NOT(I)'
_Arguments_:
I The type shall be `INTEGER(*)'.
_Return value_:
The return type is `INTEGER(*)', of the same kind as the argument.
_See also_:
*Note IAND::, *Note IEOR::, *Note IOR::, *Note IBITS::, *Note
IBSET::, *Note IBCLR::

File: gfortran.info, Node: NULL, Next: OR, Prev: NOT, Up: Intrinsic Procedures
6.152 `NULL' -- Function that returns an disassociated pointer
==============================================================
_Description_:
Returns a disassociated pointer.
If MOLD is present, a dissassociated pointer of the same type is
returned, otherwise the type is determined by context.
In Fortran 95, MOLD is optional. Please note that F2003 includes
cases where it is required.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`PTR => NULL([MOLD])'
_Arguments_:
MOLD (Optional) shall be a pointer of any
association status and of any type.
_Return value_:
A disassociated pointer.
_Example_:
REAL, POINTER, DIMENSION(:) :: VEC => NULL ()
_See also_:
*Note ASSOCIATED::

File: gfortran.info, Node: OR, Next: PACK, Prev: NULL, Up: Intrinsic Procedures
6.153 `OR' -- Bitwise logical OR
================================
_Description_:
Bitwise logical `OR'.
This intrinsic routine is provided for backwards compatibility with
GNU Fortran 77. For integer arguments, programmers should consider
the use of the *Note IOR:: intrinsic defined by the Fortran
standard.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = OR(X, Y)'
_Arguments_:
X The type shall be either `INTEGER(*)' or
`LOGICAL'.
Y The type shall be either `INTEGER(*)' or
`LOGICAL'.
_Return value_:
The return type is either `INTEGER(*)' or `LOGICAL' after
cross-promotion of the arguments.
_Example_:
PROGRAM test_or
LOGICAL :: T = .TRUE., F = .FALSE.
INTEGER :: a, b
DATA a / Z'F' /, b / Z'3' /
WRITE (*,*) OR(T, T), OR(T, F), OR(F, T), OR(F, F)
WRITE (*,*) OR(a, b)
END PROGRAM
_See also_:
F95 elemental function: *Note IOR::

File: gfortran.info, Node: PACK, Next: PERROR, Prev: OR, Up: Intrinsic Procedures
6.154 `PACK' -- Pack an array into an array of rank one
=======================================================
_Description_:
Stores the elements of ARRAY in an array of rank one.
The beginning of the resulting array is made up of elements whose
MASK equals `TRUE'. Afterwards, positions are filled with elements
taken from VECTOR.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = PACK(ARRAY, MASK[,VECTOR]'
_Arguments_:
ARRAY Shall be an array of any type.
MASK Shall be an array of type `LOGICAL' and of the
same size as ARRAY. Alternatively, it may be a
`LOGICAL' scalar.
VECTOR (Optional) shall be an array of the same type
as ARRAY and of rank one. If present, the
number of elements in VECTOR shall be equal to
or greater than the number of true elements in
MASK. If MASK is scalar, the number of
elements in VECTOR shall be equal to or
greater than the number of elements in ARRAY.
_Return value_:
The result is an array of rank one and the same type as that of
ARRAY. If VECTOR is present, the result size is that of VECTOR,
the number of `TRUE' values in MASK otherwise.
_Example_:
Gathering non-zero elements from an array:
PROGRAM test_pack_1
INTEGER :: m(6)
m = (/ 1, 0, 0, 0, 5, 0 /)
WRITE(*, FMT="(6(I0, ' '))") pack(m, m /= 0) ! "1 5"
END PROGRAM
Gathering non-zero elements from an array and appending elements
from VECTOR:
PROGRAM test_pack_2
INTEGER :: m(4)
m = (/ 1, 0, 0, 2 /)
WRITE(*, FMT="(4(I0, ' '))") pack(m, m /= 0, (/ 0, 0, 3, 4 /)) ! "1 2 3 4"
END PROGRAM
_See also_:
*Note UNPACK::

File: gfortran.info, Node: PERROR, Next: PRECISION, Prev: PACK, Up: Intrinsic Procedures
6.155 `PERROR' -- Print system error message
============================================
_Description_:
Prints (on the C `stderr' stream) a newline-terminated error
message corresponding to the last system error. This is prefixed by
STRING, a colon and a space. See `perror(3)'.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL PERROR(STRING)'
_Arguments_:
STRING A scalar of default `CHARACTER' type.
_See also_:
*Note IERRNO::

File: gfortran.info, Node: PRECISION, Next: PRESENT, Prev: PERROR, Up: Intrinsic Procedures
6.156 `PRECISION' -- Decimal precision of a real kind
=====================================================
_Description_:
`PRECISION(X)' returns the decimal precision in the model of the
type of `X'.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = PRECISION(X)'
_Arguments_:
X Shall be of type `REAL' or `COMPLEX'.
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
program prec_and_range
real(kind=4) :: x(2)
complex(kind=8) :: y
print *, precision(x), range(x)
print *, precision(y), range(y)
end program prec_and_range

File: gfortran.info, Node: PRESENT, Next: PRODUCT, Prev: PRECISION, Up: Intrinsic Procedures
6.157 `PRESENT' -- Determine whether an optional dummy argument is specified
============================================================================
_Description_:
Determines whether an optional dummy argument is present.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = PRESENT(A)'
_Arguments_:
A May be of any type and may be a pointer,
scalar or array value, or a dummy procedure.
It shall be the name of an optional dummy
argument accessible within the current
subroutine or function.
_Return value_:
Returns either `TRUE' if the optional argument A is present, or
`FALSE' otherwise.
_Example_:
PROGRAM test_present
WRITE(*,*) f(), f(42) ! "F T"
CONTAINS
LOGICAL FUNCTION f(x)
INTEGER, INTENT(IN), OPTIONAL :: x
f = PRESENT(x)
END FUNCTION
END PROGRAM

File: gfortran.info, Node: PRODUCT, Next: RADIX, Prev: PRESENT, Up: Intrinsic Procedures
6.158 `PRODUCT' -- Product of array elements
============================================
_Description_:
Multiplies the elements of ARRAY along dimension DIM if the
corresponding element in MASK is `TRUE'.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = PRODUCT(ARRAY[, MASK])' `RESULT = PRODUCT(ARRAY, DIM[,
MASK])'
_Arguments_:
ARRAY Shall be an array of type `INTEGER(*)',
`REAL(*)' or `COMPLEX(*)'.
DIM (Optional) shall be a scalar of type `INTEGER'
with a value in the range from 1 to n, where n
equals the rank of ARRAY.
MASK (Optional) shall be of type `LOGICAL' and
either be a scalar or an array of the same
shape as ARRAY.
_Return value_:
The result is of the same type as ARRAY.
If DIM is absent, a scalar with the product of all elements in
ARRAY is returned. Otherwise, an array of rank n-1, where n equals
the rank of ARRAY, and a shape similar to that of ARRAY with
dimension DIM dropped is returned.
_Example_:
PROGRAM test_product
INTEGER :: x(5) = (/ 1, 2, 3, 4 ,5 /)
print *, PRODUCT(x) ! all elements, product = 120
print *, PRODUCT(x, MASK=MOD(x, 2)==1) ! odd elements, product = 15
END PROGRAM
_See also_:
*Note SUM::

File: gfortran.info, Node: RADIX, Next: RANDOM_NUMBER, Prev: PRODUCT, Up: Intrinsic Procedures
6.159 `RADIX' -- Base of a model number
=======================================
_Description_:
`RADIX(X)' returns the base of the model representing the entity X.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = RADIX(X)'
_Arguments_:
X Shall be of type `INTEGER' or `REAL'
_Return value_:
The return value is a scalar of type `INTEGER' and of the default
integer kind.
_Example_:
program test_radix
print *, "The radix for the default integer kind is", radix(0)
print *, "The radix for the default real kind is", radix(0.0)
end program test_radix

File: gfortran.info, Node: RAN, Next: REAL, Prev: RANGE, Up: Intrinsic Procedures
6.160 `RAN' -- Real pseudo-random number
========================================
_Description_:
For compatibility with HP FORTRAN 77/iX, the `RAN' intrinsic is
provided as an alias for `RAND'. See *Note RAND:: for complete
documentation.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_See also_:
*Note RAND::, *Note RANDOM_NUMBER::

File: gfortran.info, Node: RAND, Next: RANGE, Prev: RANDOM_SEED, Up: Intrinsic Procedures
6.161 `RAND' -- Real pseudo-random number
=========================================
_Description_:
`RAND(FLAG)' returns a pseudo-random number from a uniform
distribution between 0 and 1. If FLAG is 0, the next number in the
current sequence is returned; if FLAG is 1, the generator is
restarted by `CALL SRAND(0)'; if FLAG has any other value, it is
used as a new seed with `SRAND'.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = RAND(FLAG)'
_Arguments_:
FLAG Shall be a scalar `INTEGER' of kind 4.
_Return value_:
The return value is of `REAL' type and the default kind.
_Example_:
program test_rand
integer,parameter :: seed = 86456
call srand(seed)
print *, rand(), rand(), rand(), rand()
print *, rand(seed), rand(), rand(), rand()
end program test_rand
_See also_:
*Note SRAND::, *Note RANDOM_NUMBER::

File: gfortran.info, Node: RANDOM_NUMBER, Next: RANDOM_SEED, Prev: RADIX, Up: Intrinsic Procedures
6.162 `RANDOM_NUMBER' -- Pseudo-random number
=============================================
_Description_:
Returns a single pseudorandom number or an array of pseudorandom
numbers from the uniform distribution over the range 0 \leq x < 1.
_Standard_:
F95 and later
_Class_:
Elemental subroutine
_Syntax_:
`RANDOM_NUMBER(HARVEST)'
_Arguments_:
HARVEST Shall be a scalar or an array of type
`REAL(*)'.
_Example_:
program test_random_number
REAL :: r(5,5)
CALL init_random_seed() ! see example of RANDOM_SEED
CALL RANDOM_NUMBER(r)
end program
_Note_:
The implemented random number generator is thread safe if used
within OpenMP directives, i. e. its state will be consistent while
called from multiple threads. Please note that the currently
implemented KISS generator does not create random numbers in
parallel from multiple sources, but in sequence from a single
source. If your OpenMP-enabled application heavily relies on
random numbers, you should consider employing a dedicated parallel
random number generator instead.
_See also_:
*Note RANDOM_SEED::

File: gfortran.info, Node: RANDOM_SEED, Next: RAND, Prev: RANDOM_NUMBER, Up: Intrinsic Procedures
6.163 `RANDOM_SEED' -- Initialize a pseudo-random number sequence
=================================================================
_Description_:
Restarts or queries the state of the pseudorandom number generator
used by `RANDOM_NUMBER'.
If `RANDOM_SEED' is called without arguments, it is initialized to
a default state. The example below shows how to initialize the
random seed based on the system's time.
_Standard_:
F95 and later
_Class_:
Subroutine
_Syntax_:
`CALL RANDOM_SEED(SIZE, PUT, GET)'
_Arguments_:
SIZE (Optional) Shall be a scalar and of type
default `INTEGER', with `INTENT(OUT)'. It
specifies the minimum size of the arrays used
with the PUT and GET arguments.
PUT (Optional) Shall be an array of type default
`INTEGER' and rank one. It is `INTENT(IN)' and
the size of the array must be larger than or
equal to the number returned by the SIZE
argument.
GET (Optional) Shall be an array of type default
`INTEGER' and rank one. It is `INTENT(OUT)'
and the size of the array must be larger than
or equal to the number returned by the SIZE
argument.
_Example_:
SUBROUTINE init_random_seed()
INTEGER :: i, n, clock
INTEGER, DIMENSION(:), ALLOCATABLE :: seed
CALL RANDOM_SEED(size = n)
ALLOCATE(seed(n))
CALL SYSTEM_CLOCK(COUNT=clock)
seed = clock + 37 * (/ (i - 1, i = 1, n) /)
CALL RANDOM_SEED(PUT = seed)
DEALLOCATE(seed)
END SUBROUTINE
_See also_:
*Note RANDOM_NUMBER::

File: gfortran.info, Node: RANGE, Next: RAN, Prev: RAND, Up: Intrinsic Procedures
6.164 `RANGE' -- Decimal exponent range of a real kind
======================================================
_Description_:
`RANGE(X)' returns the decimal exponent range in the model of the
type of `X'.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = RANGE(X)'
_Arguments_:
X Shall be of type `REAL' or `COMPLEX'.
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
See `PRECISION' for an example.

File: gfortran.info, Node: REAL, Next: RENAME, Prev: RAN, Up: Intrinsic Procedures
6.165 `REAL' -- Convert to real type
====================================
_Description_:
`REAL(X [, KIND])' converts its argument X to a real type. The
`REALPART(X)' function is provided for compatibility with `g77',
and its use is strongly discouraged.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = REAL(X [, KIND])'
`RESULT = REALPART(Z)'
_Arguments_:
X Shall be `INTEGER(*)', `REAL(*)', or
`COMPLEX(*)'.
KIND (Optional) An `INTEGER(*)' initialization
expression indicating the
kind parameter of the result.
_Return value_:
These functions return a `REAL(*)' variable or array under the
following rules:
(A)
`REAL(X)' is converted to a default real type if X is an
integer or real variable.
(B)
`REAL(X)' is converted to a real type with the kind type
parameter of X if X is a complex variable.
(C)
`REAL(X, KIND)' is converted to a real type with kind type
parameter KIND if X is a complex, integer, or real variable.
_Example_:
program test_real
complex :: x = (1.0, 2.0)
print *, real(x), real(x,8), realpart(x)
end program test_real
_See also_:
*Note DBLE::, *Note DFLOAT::, *Note FLOAT::

File: gfortran.info, Node: RENAME, Next: REPEAT, Prev: REAL, Up: Intrinsic Procedures
6.166 `RENAME' -- Rename a file
===============================
_Description_:
Renames a file from file PATH1 to PATH2. A null character
(`CHAR(0)') can be used to mark the end of the names in PATH1 and
PATH2; otherwise, trailing blanks in the file names are ignored.
If the STATUS argument is supplied, it contains 0 on success or a
nonzero error code upon return; see `rename(2)'.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL RENAME(PATH1, PATH2 [, STATUS])'
`STATUS = RENAME(PATH1, PATH2)'
_Arguments_:
PATH1 Shall be of default `CHARACTER' type.
PATH2 Shall be of default `CHARACTER' type.
STATUS (Optional) Shall be of default `INTEGER' type.
_See also_:
*Note LINK::

File: gfortran.info, Node: REPEAT, Next: RESHAPE, Prev: RENAME, Up: Intrinsic Procedures
6.167 `REPEAT' -- Repeated string concatenation
===============================================
_Description_:
Concatenates NCOPIES copies of a string.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = REPEAT(STRING, NCOPIES)'
_Arguments_:
STRING Shall be scalar and of type `CHARACTER(*)'.
NCOPIES Shall be scalar and of type `INTEGER(*)'.
_Return value_:
A new scalar of type `CHARACTER' built up from NCOPIES copies of
STRING.
_Example_:
program test_repeat
write(*,*) repeat("x", 5) ! "xxxxx"
end program

File: gfortran.info, Node: RESHAPE, Next: RRSPACING, Prev: REPEAT, Up: Intrinsic Procedures
6.168 `RESHAPE' -- Function to reshape an array
===============================================
_Description_:
Reshapes SOURCE to correspond to SHAPE. If necessary, the new
array may be padded with elements from PAD or permuted as defined
by ORDER.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = RESHAPE(SOURCE, SHAPE[, PAD, ORDER])'
_Arguments_:
SOURCE Shall be an array of any type.
SHAPE Shall be of type `INTEGER' and an array of
rank one. Its values must be positive or zero.
PAD (Optional) shall be an array of the same type
as SOURCE.
ORDER (Optional) shall be of type `INTEGER' and an
array of the same shape as SHAPE. Its values
shall be a permutation of the numbers from 1
to n, where n is the size of SHAPE. If ORDER
is absent, the natural ordering shall be
assumed.
_Return value_:
The result is an array of shape SHAPE with the same type as SOURCE.
_Example_:
PROGRAM test_reshape
INTEGER, DIMENSION(4) :: x
WRITE(*,*) SHAPE(x) ! prints "4"
WRITE(*,*) SHAPE(RESHAPE(x, (/2, 2/))) ! prints "2 2"
END PROGRAM
_See also_:
*Note SHAPE::

File: gfortran.info, Node: RRSPACING, Next: RSHIFT, Prev: RESHAPE, Up: Intrinsic Procedures
6.169 `RRSPACING' -- Reciprocal of the relative spacing
=======================================================
_Description_:
`RRSPACING(X)' returns the reciprocal of the relative spacing of
model numbers near X.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = RRSPACING(X)'
_Arguments_:
X Shall be of type `REAL'.
_Return value_:
The return value is of the same type and kind as X. The value
returned is equal to `ABS(FRACTION(X)) *
FLOAT(RADIX(X))**DIGITS(X)'.
_See also_:
*Note SPACING::

File: gfortran.info, Node: RSHIFT, Next: SCALE, Prev: RRSPACING, Up: Intrinsic Procedures
6.170 `RSHIFT' -- Right shift bits
==================================
_Description_:
`RSHIFT' returns a value corresponding to I with all of the bits
shifted right by SHIFT places. If the absolute value of SHIFT is
greater than `BIT_SIZE(I)', the value is undefined. Bits shifted
out from the left end are lost; zeros are shifted in from the
opposite end.
This function has been superseded by the `ISHFT' intrinsic, which
is standard in Fortran 95 and later.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = RSHIFT(I, SHIFT)'
_Arguments_:
I The type shall be `INTEGER(*)'.
SHIFT The type shall be `INTEGER(*)'.
_Return value_:
The return value is of type `INTEGER(*)' and of the same kind as I.
_See also_:
*Note ISHFT::, *Note ISHFTC::, *Note LSHIFT::

File: gfortran.info, Node: SCALE, Next: SCAN, Prev: RSHIFT, Up: Intrinsic Procedures
6.171 `SCALE' -- Scale a real value
===================================
_Description_:
`SCALE(X,I)' returns `X * RADIX(X)**I'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = SCALE(X, I)'
_Arguments_:
X The type of the argument shall be a `REAL'.
I The type of the argument shall be a `INTEGER'.
_Return value_:
The return value is of the same type and kind as X. Its value is
`X * RADIX(X)**I'.
_Example_:
program test_scale
real :: x = 178.1387e-4
integer :: i = 5
print *, scale(x,i), x*radix(x)**i
end program test_scale

File: gfortran.info, Node: SCAN, Next: SECNDS, Prev: SCALE, Up: Intrinsic Procedures
6.172 `SCAN' -- Scan a string for the presence of a set of characters
=====================================================================
_Description_:
Scans a STRING for any of the characters in a SET of characters.
If BACK is either absent or equals `FALSE', this function returns
the position of the leftmost character of STRING that is in SET.
If BACK equals `TRUE', the rightmost position is returned. If no
character of SET is found in STRING, the result is zero.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = SCAN(STRING, SET[, BACK])'
_Arguments_:
STRING Shall be of type `CHARACTER(*)'.
SET Shall be of type `CHARACTER(*)'.
BACK (Optional) shall be of type `LOGICAL'.
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
PROGRAM test_scan
WRITE(*,*) SCAN("FORTRAN", "AO") ! 2, found 'O'
WRITE(*,*) SCAN("FORTRAN", "AO", .TRUE.) ! 6, found 'A'
WRITE(*,*) SCAN("FORTRAN", "C++") ! 0, found none
END PROGRAM
_See also_:
*Note INDEX::, *Note VERIFY::

File: gfortran.info, Node: SECNDS, Next: SECOND, Prev: SCAN, Up: Intrinsic Procedures
6.173 `SECNDS' -- Time function
===============================
_Description_:
`SECNDS(X)' gets the time in seconds from the real-time system
clock. X is a reference time, also in seconds. If this is zero,
the time in seconds from midnight is returned. This function is
non-standard and its use is discouraged.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = SECNDS (X)'
_Arguments_:
T Shall be of type `REAL(4)'.
X Shall be of type `REAL(4)'.
_Return value_:
None
_Example_:
program test_secnds
integer :: i
real(4) :: t1, t2
print *, secnds (0.0) ! seconds since midnight
t1 = secnds (0.0) ! reference time
do i = 1, 10000000 ! do something
end do
t2 = secnds (t1) ! elapsed time
print *, "Something took ", t2, " seconds."
end program test_secnds

File: gfortran.info, Node: SECOND, Next: SELECTED_INT_KIND, Prev: SECNDS, Up: Intrinsic Procedures
6.174 `SECOND' -- CPU time function
===================================
_Description_:
Returns a `REAL(4)' value representing the elapsed CPU time in
seconds. This provides the same functionality as the standard
`CPU_TIME' intrinsic, and is only included for backwards
compatibility.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL SECOND(TIME)'
`TIME = SECOND()'
_Arguments_:
TIME Shall be of type `REAL(4)'.
_Return value_:
In either syntax, TIME is set to the process's current runtime in
seconds.
_See also_:
*Note CPU_TIME::

File: gfortran.info, Node: SELECTED_INT_KIND, Next: SELECTED_REAL_KIND, Prev: SECOND, Up: Intrinsic Procedures
6.175 `SELECTED_INT_KIND' -- Choose integer kind
================================================
_Description_:
`SELECTED_INT_KIND(I)' return the kind value of the smallest
integer type that can represent all values ranging from -10^I
(exclusive) to 10^I (exclusive). If there is no integer kind that
accommodates this range, `SELECTED_INT_KIND' returns -1.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = SELECTED_INT_KIND(I)'
_Arguments_:
I Shall be a scalar and of type `INTEGER'.
_Example_:
program large_integers
integer,parameter :: k5 = selected_int_kind(5)
integer,parameter :: k15 = selected_int_kind(15)
integer(kind=k5) :: i5
integer(kind=k15) :: i15
print *, huge(i5), huge(i15)
! The following inequalities are always true
print *, huge(i5) >= 10_k5**5-1
print *, huge(i15) >= 10_k15**15-1
end program large_integers

File: gfortran.info, Node: SELECTED_REAL_KIND, Next: SET_EXPONENT, Prev: SELECTED_INT_KIND, Up: Intrinsic Procedures
6.176 `SELECTED_REAL_KIND' -- Choose real kind
==============================================
_Description_:
`SELECTED_REAL_KIND(P,R)' return the kind value of a real data type
with decimal precision greater of at least `P' digits and exponent
range greater at least `R'.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = SELECTED_REAL_KIND(P, R)'
_Arguments_:
P (Optional) shall be a scalar and of type
`INTEGER'.
R (Optional) shall be a scalar and of type
`INTEGER'.
At least one argument shall be present.
_Return value_:
`SELECTED_REAL_KIND' returns the value of the kind type parameter
of a real data type with decimal precision of at least `P' digits
and a decimal exponent range of at least `R'. If more than one
real data type meet the criteria, the kind of the data type with
the smallest decimal precision is returned. If no real data type
matches the criteria, the result is
-1 if the processor does not support a real data type with a
precision greater than or equal to `P'
-2 if the processor does not support a real type with an exponent
range greater than or equal to `R'
-3 if neither is supported.
_Example_:
program real_kinds
integer,parameter :: p6 = selected_real_kind(6)
integer,parameter :: p10r100 = selected_real_kind(10,100)
integer,parameter :: r400 = selected_real_kind(r=400)
real(kind=p6) :: x
real(kind=p10r100) :: y
real(kind=r400) :: z
print *, precision(x), range(x)
print *, precision(y), range(y)
print *, precision(z), range(z)
end program real_kinds

File: gfortran.info, Node: SET_EXPONENT, Next: SHAPE, Prev: SELECTED_REAL_KIND, Up: Intrinsic Procedures
6.177 `SET_EXPONENT' -- Set the exponent of the model
=====================================================
_Description_:
`SET_EXPONENT(X, I)' returns the real number whose fractional part
is that that of X and whose exponent part is I.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = SET_EXPONENT(X, I)'
_Arguments_:
X Shall be of type `REAL'.
I Shall be of type `INTEGER'.
_Return value_:
The return value is of the same type and kind as X. The real
number whose fractional part is that that of X and whose exponent
part if I is returned; it is `FRACTION(X) * RADIX(X)**I'.
_Example_:
PROGRAM test_setexp
REAL :: x = 178.1387e-4
INTEGER :: i = 17
PRINT *, SET_EXPONENT(x, i), FRACTION(x) * RADIX(x)**i
END PROGRAM

File: gfortran.info, Node: SHAPE, Next: SIGN, Prev: SET_EXPONENT, Up: Intrinsic Procedures
6.178 `SHAPE' -- Determine the shape of an array
================================================
_Description_:
Determines the shape of an array.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = SHAPE(SOURCE)'
_Arguments_:
SOURCE Shall be an array or scalar of any type. If
SOURCE is a pointer it must be associated and
allocatable arrays must be allocated.
_Return value_:
An `INTEGER' array of rank one with as many elements as SOURCE has
dimensions. The elements of the resulting array correspond to the
extend of SOURCE along the respective dimensions. If SOURCE is a
scalar, the result is the rank one array of size zero.
_Example_:
PROGRAM test_shape
INTEGER, DIMENSION(-1:1, -1:2) :: A
WRITE(*,*) SHAPE(A) ! (/ 3, 4 /)
WRITE(*,*) SIZE(SHAPE(42)) ! (/ /)
END PROGRAM
_See also_:
*Note RESHAPE::, *Note SIZE::

File: gfortran.info, Node: SIGN, Next: SIGNAL, Prev: SHAPE, Up: Intrinsic Procedures
6.179 `SIGN' -- Sign copying function
=====================================
_Description_:
`SIGN(A,B)' returns the value of A with the sign of B.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = SIGN(A, B)'
_Arguments_:
A Shall be of type `INTEGER' or `REAL'
B Shall be of the same type and kind as A
_Return value_:
The kind of the return value is that of A and B. If B\ge 0 then
the result is `ABS(A)', else it is `-ABS(A)'.
_Example_:
program test_sign
print *, sign(-12,1)
print *, sign(-12,0)
print *, sign(-12,-1)
print *, sign(-12.,1.)
print *, sign(-12.,0.)
print *, sign(-12.,-1.)
end program test_sign
_Specific names_:
Name Arguments Return type Standard
`ISIGN(A,P)' `INTEGER(4)' `INTEGER(4)' f95, gnu
`DSIGN(A,P)' `REAL(8)' `REAL(8)' f95, gnu

File: gfortran.info, Node: SIGNAL, Next: SIN, Prev: SIGN, Up: Intrinsic Procedures
6.180 `SIGNAL' -- Signal handling subroutine (or function)
==========================================================
_Description_:
`SIGNAL(NUMBER, HANDLER [, STATUS])' causes external subroutine
HANDLER to be executed with a single integer argument when signal
NUMBER occurs. If HANDLER is an integer, it can be used to turn
off handling of signal NUMBER or revert to its default action.
See `signal(2)'.
If `SIGNAL' is called as a subroutine and the STATUS argument is
supplied, it is set to the value returned by `signal(2)'.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL SIGNAL(NUMBER, HANDLER [, STATUS])'
`STATUS = SIGNAL(NUMBER, HANDLER)'
_Arguments_:
NUMBER Shall be a scalar integer, with `INTENT(IN)'
HANDLER Signal handler (`INTEGER FUNCTION' or
`SUBROUTINE') or dummy/global `INTEGER' scalar.
`INTEGER'. It is `INTENT(IN)'.
STATUS (Optional) STATUS shall be a scalar integer.
It has `INTENT(OUT)'.
_Return value_:
The `SIGNAL' function returns the value returned by `signal(2)'.
_Example_:
program test_signal
intrinsic signal
external handler_print
call signal (12, handler_print)
call signal (10, 1)
call sleep (30)
end program test_signal

File: gfortran.info, Node: SIN, Next: SINH, Prev: SIGNAL, Up: Intrinsic Procedures
6.181 `SIN' -- Sine function
============================
_Description_:
`SIN(X)' computes the sine of X.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = SIN(X)'
_Arguments_:
X The type shall be `REAL(*)' or `COMPLEX(*)'.
_Return value_:
The return value has same type and kind as X.
_Example_:
program test_sin
real :: x = 0.0
x = sin(x)
end program test_sin
_Specific names_:
Name Argument Return type Standard
`DSIN(X)' `REAL(8) X' `REAL(8)' f95, gnu
`CSIN(X)' `COMPLEX(4) `COMPLEX(4)' f95, gnu
X'
`ZSIN(X)' `COMPLEX(8) `COMPLEX(8)' f95, gnu
X'
`CDSIN(X)' `COMPLEX(8) `COMPLEX(8)' f95, gnu
X'
_See also_:
*Note ASIN::

File: gfortran.info, Node: SINH, Next: SIZE, Prev: SIN, Up: Intrinsic Procedures
6.182 `SINH' -- Hyperbolic sine function
========================================
_Description_:
`SINH(X)' computes the hyperbolic sine of X.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = SINH(X)'
_Arguments_:
X The type shall be `REAL(*)'.
_Return value_:
The return value is of type `REAL(*)'.
_Example_:
program test_sinh
real(8) :: x = - 1.0_8
x = sinh(x)
end program test_sinh
_Specific names_:
Name Argument Return type Standard
`DSINH(X)' `REAL(8) X' `REAL(8)' F95 and later
_See also_:
*Note ASINH::

File: gfortran.info, Node: SIZE, Next: SLEEP, Prev: SINH, Up: Intrinsic Procedures
6.183 `SIZE' -- Determine the size of an array
==============================================
_Description_:
Determine the extent of ARRAY along a specified dimension DIM, or
the total number of elements in ARRAY if DIM is absent.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = SIZE(ARRAY[, DIM])'
_Arguments_:
ARRAY Shall be an array of any type. If ARRAY is a
pointer it must be associated and allocatable
arrays must be allocated.
DIM (Optional) shall be a scalar of type `INTEGER'
and its value shall be in the range from 1 to
n, where n equals the rank of ARRAY.
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
PROGRAM test_size
WRITE(*,*) SIZE((/ 1, 2 /)) ! 2
END PROGRAM
_See also_:
*Note SHAPE::, *Note RESHAPE::

File: gfortran.info, Node: SLEEP, Next: SNGL, Prev: SIZE, Up: Intrinsic Procedures
6.184 `SLEEP' -- Sleep for the specified number of seconds
==========================================================
_Description_:
Calling this subroutine causes the process to pause for SECONDS
seconds.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL SLEEP(SECONDS)'
_Arguments_:
SECONDS The type shall be of default `INTEGER'.
_Example_:
program test_sleep
call sleep(5)
end

File: gfortran.info, Node: SNGL, Next: SPACING, Prev: SLEEP, Up: Intrinsic Procedures
6.185 `SNGL' -- Convert double precision real to default real
=============================================================
_Description_:
`SNGL(A)' converts the double precision real A to a default real
value. This is an archaic form of `REAL' that is specific to one
type for A.
_Standard_:
GNU extension
_Class_:
Elemental function
_Syntax_:
`RESULT = SNGL(A)'
_Arguments_:
A The type shall be a double precision `REAL'.
_Return value_:
The return value is of type default `REAL'.
_See also_:
*Note DBLE::

File: gfortran.info, Node: SPACING, Next: SPREAD, Prev: SNGL, Up: Intrinsic Procedures
6.186 `SPACING' -- Smallest distance between two numbers of a given type
========================================================================
_Description_:
Determines the distance between the argument X and the nearest
adjacent number of the same type.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = SPACING(X)'
_Arguments_:
X Shall be of type `REAL(*)'.
_Return value_:
The result is of the same type as the input argument X.
_Example_:
PROGRAM test_spacing
INTEGER, PARAMETER :: SGL = SELECTED_REAL_KIND(p=6, r=37)
INTEGER, PARAMETER :: DBL = SELECTED_REAL_KIND(p=13, r=200)
WRITE(*,*) spacing(1.0_SGL) ! "1.1920929E-07" on i686
WRITE(*,*) spacing(1.0_DBL) ! "2.220446049250313E-016" on i686
END PROGRAM
_See also_:
*Note RRSPACING::

File: gfortran.info, Node: SPREAD, Next: SQRT, Prev: SPACING, Up: Intrinsic Procedures
6.187 `SPREAD' -- Add a dimension to an array
=============================================
_Description_:
Replicates a SOURCE array NCOPIES times along a specified
dimension DIM.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = SPREAD(SOURCE, DIM, NCOPIES)'
_Arguments_:
SOURCE Shall be a scalar or an array of any type and
a rank less than seven.
DIM Shall be a scalar of type `INTEGER' with a
value in the range from 1 to n+1, where n
equals the rank of SOURCE.
NCOPIES Shall be a scalar of type `INTEGER'.
_Return value_:
The result is an array of the same type as SOURCE and has rank n+1
where n equals the rank of SOURCE.
_Example_:
PROGRAM test_spread
INTEGER :: a = 1, b(2) = (/ 1, 2 /)
WRITE(*,*) SPREAD(A, 1, 2) ! "1 1"
WRITE(*,*) SPREAD(B, 1, 2) ! "1 1 2 2"
END PROGRAM
_See also_:
*Note UNPACK::

File: gfortran.info, Node: SQRT, Next: SRAND, Prev: SPREAD, Up: Intrinsic Procedures
6.188 `SQRT' -- Square-root function
====================================
_Description_:
`SQRT(X)' computes the square root of X.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = SQRT(X)'
_Arguments_:
X The type shall be `REAL(*)' or `COMPLEX(*)'.
_Return value_:
The return value is of type `REAL(*)' or `COMPLEX(*)'. The kind
type parameter is the same as X.
_Example_:
program test_sqrt
real(8) :: x = 2.0_8
complex :: z = (1.0, 2.0)
x = sqrt(x)
z = sqrt(z)
end program test_sqrt
_Specific names_:
Name Argument Return type Standard
`DSQRT(X)' `REAL(8) X' `REAL(8)' F95 and later
`CSQRT(X)' `COMPLEX(4) `COMPLEX(4)' F95 and later
X'
`ZSQRT(X)' `COMPLEX(8) `COMPLEX(8)' GNU extension
X'
`CDSQRT(X)' `COMPLEX(8) `COMPLEX(8)' GNU extension
X'

File: gfortran.info, Node: SRAND, Next: STAT, Prev: SQRT, Up: Intrinsic Procedures
6.189 `SRAND' -- Reinitialize the random number generator
=========================================================
_Description_:
`SRAND' reinitializes the pseudo-random number generator called by
`RAND' and `IRAND'. The new seed used by the generator is
specified by the required argument SEED.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL SRAND(SEED)'
_Arguments_:
SEED Shall be a scalar `INTEGER(kind=4)'.
_Return value_:
Does not return.
_Example_:
See `RAND' and `IRAND' for examples.
_Notes_:
The Fortran 2003 standard specifies the intrinsic `RANDOM_SEED' to
initialize the pseudo-random numbers generator and `RANDOM_NUMBER'
to generate pseudo-random numbers. Please note that in GNU
Fortran, these two sets of intrinsics (`RAND', `IRAND' and `SRAND'
on the one hand, `RANDOM_NUMBER' and `RANDOM_SEED' on the other
hand) access two independent pseudo-random number generators.
_See also_:
*Note RAND::, *Note RANDOM_SEED::, *Note RANDOM_NUMBER::

File: gfortran.info, Node: STAT, Next: SUM, Prev: SRAND, Up: Intrinsic Procedures
6.190 `STAT' -- Get file status
===============================
_Description_:
This function returns information about a file. No permissions are
required on the file itself, but execute (search) permission is
required on all of the directories in path that lead to the file.
The elements that are obtained and stored in the array `BUFF':
`buff(1)' Device ID
`buff(2)' Inode number
`buff(3)' File mode
`buff(4)' Number of links
`buff(5)' Owner's uid
`buff(6)' Owner's gid
`buff(7)' ID of device containing directory entry for
file (0 if not available)
`buff(8)' File size (bytes)
`buff(9)' Last access time
`buff(10)' Last modification time
`buff(11)' Last file status change time
`buff(12)' Preferred I/O block size (-1 if not available)
`buff(13)' Number of blocks allocated (-1 if not
available)
Not all these elements are relevant on all systems. If an element
is not relevant, it is returned as 0.
_Standard_:
GNU extension
_Class_:
Non-elemental subroutine
_Syntax_:
`CALL STAT(FILE,BUFF[,STATUS])'
_Arguments_:
FILE The type shall be `CHARACTER(*)', a valid path
within the file system.
BUFF The type shall be `INTEGER(4), DIMENSION(13)'.
STATUS (Optional) status flag of type `INTEGER(4)'.
Returns 0 on success
and a system specific error code otherwise.
_Example_:
PROGRAM test_stat
INTEGER, DIMENSION(13) :: buff
INTEGER :: status
CALL STAT("/etc/passwd", buff, status)
IF (status == 0) THEN
WRITE (*, FMT="('Device ID:', T30, I19)") buff(1)
WRITE (*, FMT="('Inode number:', T30, I19)") buff(2)
WRITE (*, FMT="('File mode (octal):', T30, O19)") buff(3)
WRITE (*, FMT="('Number of links:', T30, I19)") buff(4)
WRITE (*, FMT="('Owner''s uid:', T30, I19)") buff(5)
WRITE (*, FMT="('Owner''s gid:', T30, I19)") buff(6)
WRITE (*, FMT="('Device where located:', T30, I19)") buff(7)
WRITE (*, FMT="('File size:', T30, I19)") buff(8)
WRITE (*, FMT="('Last access time:', T30, A19)") CTIME(buff(9))
WRITE (*, FMT="('Last modification time', T30, A19)") CTIME(buff(10))
WRITE (*, FMT="('Last status change time:', T30, A19)") CTIME(buff(11))
WRITE (*, FMT="('Preferred block size:', T30, I19)") buff(12)
WRITE (*, FMT="('No. of blocks allocated:', T30, I19)") buff(13)
END IF
END PROGRAM
_See also_:
To stat an open file: *Note FSTAT::, to stat a link: *Note LSTAT::

File: gfortran.info, Node: SUM, Next: SYMLNK, Prev: STAT, Up: Intrinsic Procedures
6.191 `SUM' -- Sum of array elements
====================================
_Description_:
Adds the elements of ARRAY along dimension DIM if the
corresponding element in MASK is `TRUE'.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = SUM(ARRAY[, MASK])' `RESULT = SUM(ARRAY, DIM[, MASK])'
_Arguments_:
ARRAY Shall be an array of type `INTEGER(*)',
`REAL(*)' or `COMPLEX(*)'.
DIM (Optional) shall be a scalar of type `INTEGER'
with a value in the range from 1 to n, where n
equals the rank of ARRAY.
MASK (Optional) shall be of type `LOGICAL' and
either be a scalar or an array of the same
shape as ARRAY.
_Return value_:
The result is of the same type as ARRAY.
If DIM is absent, a scalar with the sum of all elements in ARRAY
is returned. Otherwise, an array of rank n-1, where n equals the
rank of ARRAY,and a shape similar to that of ARRAY with dimension
DIM dropped is returned.
_Example_:
PROGRAM test_sum
INTEGER :: x(5) = (/ 1, 2, 3, 4 ,5 /)
print *, SUM(x) ! all elements, sum = 15
print *, SUM(x, MASK=MOD(x, 2)==1) ! odd elements, sum = 9
END PROGRAM
_See also_:
*Note PRODUCT::

File: gfortran.info, Node: SYMLNK, Next: SYSTEM, Prev: SUM, Up: Intrinsic Procedures
6.192 `SYMLNK' -- Create a symbolic link
========================================
_Description_:
Makes a symbolic link from file PATH1 to PATH2. A null character
(`CHAR(0)') can be used to mark the end of the names in PATH1 and
PATH2; otherwise, trailing blanks in the file names are ignored.
If the STATUS argument is supplied, it contains 0 on success or a
nonzero error code upon return; see `symlink(2)'. If the system
does not supply `symlink(2)', `ENOSYS' is returned.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL SYMLNK(PATH1, PATH2 [, STATUS])'
`STATUS = SYMLNK(PATH1, PATH2)'
_Arguments_:
PATH1 Shall be of default `CHARACTER' type.
PATH2 Shall be of default `CHARACTER' type.
STATUS (Optional) Shall be of default `INTEGER' type.
_See also_:
*Note LINK::, *Note UNLINK::

File: gfortran.info, Node: SYSTEM, Next: SYSTEM_CLOCK, Prev: SYMLNK, Up: Intrinsic Procedures
6.193 `SYSTEM' -- Execute a shell command
=========================================
_Description_:
Passes the command COMMAND to a shell (see `system(3)'). If
argument STATUS is present, it contains the value returned by
`system(3)', which is presumably 0 if the shell command succeeded.
Note that which shell is used to invoke the command is
system-dependent and environment-dependent.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL SYSTEM(COMMAND [, STATUS])'
`STATUS = SYSTEM(COMMAND)'
_Arguments_:
COMMAND Shall be of default `CHARACTER' type.
STATUS (Optional) Shall be of default `INTEGER' type.
_See also_:

File: gfortran.info, Node: SYSTEM_CLOCK, Next: TAN, Prev: SYSTEM, Up: Intrinsic Procedures
6.194 `SYSTEM_CLOCK' -- Time function
=====================================
_Description_:
Determines the COUNT of milliseconds of wall clock time since the
Epoch (00:00:00 UTC, January 1, 1970) modulo COUNT_MAX, COUNT_RATE
determines the number of clock ticks per second. COUNT_RATE and
COUNT_MAX are constant and specific to `gfortran'.
If there is no clock, COUNT is set to `-HUGE(COUNT)', and
COUNT_RATE and COUNT_MAX are set to zero
_Standard_:
F95 and later
_Class_:
Subroutine
_Syntax_:
`CALL SYSTEM_CLOCK([COUNT, COUNT_RATE, COUNT_MAX])'
_Arguments_:
_Arguments_:
COUNT (Optional) shall be a scalar of type default
`INTEGER' with `INTENT(OUT)'.
COUNT_RATE (Optional) shall be a scalar of type default
`INTEGER' with `INTENT(OUT)'.
COUNT_MAX (Optional) shall be a scalar of type default
`INTEGER' with `INTENT(OUT)'.
_Example_:
PROGRAM test_system_clock
INTEGER :: count, count_rate, count_max
CALL SYSTEM_CLOCK(count, count_rate, count_max)
WRITE(*,*) count, count_rate, count_max
END PROGRAM
_See also_:
*Note DATE_AND_TIME::, *Note CPU_TIME::

File: gfortran.info, Node: TAN, Next: TANH, Prev: SYSTEM_CLOCK, Up: Intrinsic Procedures
6.195 `TAN' -- Tangent function
===============================
_Description_:
`TAN(X)' computes the tangent of X.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = TAN(X)'
_Arguments_:
X The type shall be `REAL(*)'.
_Return value_:
The return value is of type `REAL(*)'. The kind type parameter is
the same as X.
_Example_:
program test_tan
real(8) :: x = 0.165_8
x = tan(x)
end program test_tan
_Specific names_:
Name Argument Return type Standard
`DTAN(X)' `REAL(8) X' `REAL(8)' F95 and later
_See also_:
*Note ATAN::

File: gfortran.info, Node: TANH, Next: TIME, Prev: TAN, Up: Intrinsic Procedures
6.196 `TANH' -- Hyperbolic tangent function
===========================================
_Description_:
`TANH(X)' computes the hyperbolic tangent of X.
_Standard_:
F77 and later
_Class_:
Elemental function
_Syntax_:
`X = TANH(X)'
_Arguments_:
X The type shall be `REAL(*)'.
_Return value_:
The return value is of type `REAL(*)' and lies in the range - 1
\leq tanh(x) \leq 1 .
_Example_:
program test_tanh
real(8) :: x = 2.1_8
x = tanh(x)
end program test_tanh
_Specific names_:
Name Argument Return type Standard
`DTANH(X)' `REAL(8) X' `REAL(8)' F95 and later
_See also_:
*Note ATANH::

File: gfortran.info, Node: TIME, Next: TIME8, Prev: TANH, Up: Intrinsic Procedures
6.197 `TIME' -- Time function
=============================
_Description_:
Returns the current time encoded as an integer (in the manner of
the UNIX function `time(3)'). This value is suitable for passing to
`CTIME()', `GMTIME()', and `LTIME()'.
This intrinsic is not fully portable, such as to systems with
32-bit `INTEGER' types but supporting times wider than 32 bits.
Therefore, the values returned by this intrinsic might be, or
become, negative, or numerically less than previous values, during
a single run of the compiled program.
See *Note TIME8::, for information on a similar intrinsic that
might be portable to more GNU Fortran implementations, though to
fewer Fortran compilers.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = TIME()'
_Return value_:
The return value is a scalar of type `INTEGER(4)'.
_See also_:
*Note CTIME::, *Note GMTIME::, *Note LTIME::, *Note MCLOCK::,
*Note TIME8::

File: gfortran.info, Node: TIME8, Next: TINY, Prev: TIME, Up: Intrinsic Procedures
6.198 `TIME8' -- Time function (64-bit)
=======================================
_Description_:
Returns the current time encoded as an integer (in the manner of
the UNIX function `time(3)'). This value is suitable for passing to
`CTIME()', `GMTIME()', and `LTIME()'.
_Warning:_ this intrinsic does not increase the range of the timing
values over that returned by `time(3)'. On a system with a 32-bit
`time(3)', `TIME8()' will return a 32-bit value, even though it is
converted to a 64-bit `INTEGER(8)' value. That means overflows of
the 32-bit value can still occur. Therefore, the values returned
by this intrinsic might be or become negative or numerically less
than previous values during a single run of the compiled program.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = TIME8()'
_Return value_:
The return value is a scalar of type `INTEGER(8)'.
_See also_:
*Note CTIME::, *Note GMTIME::, *Note LTIME::, *Note MCLOCK8::,
*Note TIME::

File: gfortran.info, Node: TINY, Next: TRANSFER, Prev: TIME8, Up: Intrinsic Procedures
6.199 `TINY' -- Smallest positive number of a real kind
=======================================================
_Description_:
`TINY(X)' returns the smallest positive (non zero) number in the
model of the type of `X'.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = TINY(X)'
_Arguments_:
X Shall be of type `REAL'.
_Return value_:
The return value is of the same type and kind as X
_Example_:
See `HUGE' for an example.

File: gfortran.info, Node: TRANSFER, Next: TRANSPOSE, Prev: TINY, Up: Intrinsic Procedures
6.200 `TRANSFER' -- Transfer bit patterns
=========================================
_Description_:
Interprets the bitwise representation of SOURCE in memory as if it
is the representation of a variable or array of the same type and
type parameters as MOLD.
This is approximately equivalent to the C concept of _casting_ one
type to another.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = TRANSFER(SOURCE, MOLD[, SIZE])'
_Arguments_:
SOURCE Shall be a scalar or an array of any type.
MOLD Shall be a scalar or an array of any type.
SIZE (Optional) shall be a scalar of type `INTEGER'.
_Return value_:
The result has the same type as MOLD, with the bit level
representation of SOURCE. If SIZE is present, the result is a
one-dimensional array of length SIZE. If SIZE is absent but MOLD
is an array (of any size or shape), the result is a one-
dimensional array of the minimum length needed to contain the
entirety of the bitwise representation of SOURCE. If SIZE is
absent and MOLD is a scalar, the result is a scalar.
If the bitwise representation of the result is longer than that of
SOURCE, then the leading bits of the result correspond to those of
SOURCE and any trailing bits are filled arbitrarily.
When the resulting bit representation does not correspond to a
valid representation of a variable of the same type as MOLD, the
results are undefined, and subsequent operations on the result
cannot be guaranteed to produce sensible behavior. For example,
it is possible to create `LOGICAL' variables for which `VAR' and
`.NOT.VAR' both appear to be true.
_Example_:
PROGRAM test_transfer
integer :: x = 2143289344
print *, transfer(x, 1.0) ! prints "NaN" on i686
END PROGRAM

File: gfortran.info, Node: TRANSPOSE, Next: TRIM, Prev: TRANSFER, Up: Intrinsic Procedures
6.201 `TRANSPOSE' -- Transpose an array of rank two
===================================================
_Description_:
Transpose an array of rank two. Element (i, j) of the result has
the value `MATRIX(j, i)', for all i, j.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = TRANSPOSE(MATRIX)'
_Arguments_:
MATRIX Shall be an array of any type and have a rank
of two.
_Return value_:
The result has the the same type as MATRIX, and has shape `(/ m, n
/)' if MATRIX has shape `(/ n, m /)'.

File: gfortran.info, Node: TRIM, Next: TTYNAM, Prev: TRANSPOSE, Up: Intrinsic Procedures
6.202 `TRIM' -- Remove trailing blank characters of a string
============================================================
_Description_:
Removes trailing blank characters of a string.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = TRIM(STRING)'
_Arguments_:
STRING Shall be a scalar of type `CHARACTER(*)'.
_Return value_:
A scalar of type `CHARACTER(*)' which length is that of STRING
less the number of trailing blanks.
_Example_:
PROGRAM test_trim
CHARACTER(len=10), PARAMETER :: s = "GFORTRAN "
WRITE(*,*) LEN(s), LEN(TRIM(s)) ! "10 8", with/without trailing blanks
END PROGRAM
_See also_:
*Note ADJUSTL::, *Note ADJUSTR::

File: gfortran.info, Node: TTYNAM, Next: UBOUND, Prev: TRIM, Up: Intrinsic Procedures
6.203 `TTYNAM' -- Get the name of a terminal device.
====================================================
_Description_:
Get the name of a terminal device. For more information, see
`ttyname(3)'.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL TTYNAM(UNIT, NAME)'
`NAME = TTYNAM(UNIT)'
_Arguments_:
UNIT Shall be a scalar `INTEGER(*)'.
NAME Shall be of type `CHARACTER(*)'.
_Example_:
PROGRAM test_ttynam
INTEGER :: unit
DO unit = 1, 10
IF (isatty(unit=unit)) write(*,*) ttynam(unit)
END DO
END PROGRAM
_See also_:
*Note ISATTY::

File: gfortran.info, Node: UBOUND, Next: UMASK, Prev: TTYNAM, Up: Intrinsic Procedures
6.204 `UBOUND' -- Upper dimension bounds of an array
====================================================
_Description_:
Returns the upper bounds of an array, or a single upper bound
along the DIM dimension.
_Standard_:
F95 and later
_Class_:
Inquiry function
_Syntax_:
`RESULT = UBOUND(ARRAY [, DIM])'
_Arguments_:
ARRAY Shall be an array, of any type.
DIM (Optional) Shall be a scalar `INTEGER(*)'.
_Return value_:
If DIM is absent, the result is an array of the upper bounds of
ARRAY. If DIM is present, the result is a scalar corresponding to
the upper bound of the array along that dimension. If ARRAY is an
expression rather than a whole array or array structure component,
or if it has a zero extent along the relevant dimension, the upper
bound is taken to be the number of elements along the relevant
dimension.
_See also_:
*Note LBOUND::

File: gfortran.info, Node: UMASK, Next: UNLINK, Prev: UBOUND, Up: Intrinsic Procedures
6.205 `UMASK' -- Set the file creation mask
===========================================
_Description_:
Sets the file creation mask to MASK and returns the old value in
argument OLD if it is supplied. See `umask(2)'.
_Standard_:
GNU extension
_Class_:
Subroutine
_Syntax_:
`CALL UMASK(MASK [, OLD])'
_Arguments_:
MASK Shall be a scalar of type `INTEGER(*)'.
MASK (Optional) Shall be a scalar of type
`INTEGER(*)'.

File: gfortran.info, Node: UNLINK, Next: UNPACK, Prev: UMASK, Up: Intrinsic Procedures
6.206 `UNLINK' -- Remove a file from the file system
====================================================
_Description_:
Unlinks the file PATH. A null character (`CHAR(0)') can be used to
mark the end of the name in PATH; otherwise, trailing blanks in
the file name are ignored. If the STATUS argument is supplied, it
contains 0 on success or a nonzero error code upon return; see
`unlink(2)'.
This intrinsic is provided in both subroutine and function forms;
however, only one form can be used in any given program unit.
_Standard_:
GNU extension
_Class_:
Subroutine, non-elemental function
_Syntax_:
`CALL UNLINK(PATH [, STATUS])'
`STATUS = UNLINK(PATH)'
_Arguments_:
PATH Shall be of default `CHARACTER' type.
STATUS (Optional) Shall be of default `INTEGER' type.
_See also_:
*Note LINK::, *Note SYMLNK::

File: gfortran.info, Node: UNPACK, Next: VERIFY, Prev: UNLINK, Up: Intrinsic Procedures
6.207 `UNPACK' -- Unpack an array of rank one into an array
===========================================================
_Description_:
Store the elements of VECTOR in an array of higher rank.
_Standard_:
F95 and later
_Class_:
Transformational function
_Syntax_:
`RESULT = UNPACK(VECTOR, MASK, FIELD)'
_Arguments_:
VECTOR Shall be an array of any type and rank one. It
shall have at least as many elements as MASK
has `TRUE' values.
MASK Shall be an array of type `LOGICAL'.
FIELD Shall be of the sam type as VECTOR and have
the same shape as MASK.
_Return value_:
The resulting array corresponds to FIELD with `TRUE' elements of
MASK replaced by values from VECTOR in array element order.
_Example_:
PROGRAM test_unpack
integer :: vector(2) = (/1,1/)
logical :: mask(4) = (/ .TRUE., .FALSE., .FALSE., .TRUE. /)
integer :: field(2,2) = 0, unity(2,2)
! result: unity matrix
unity = unpack(vector, reshape(mask, (/2,2/)), field)
END PROGRAM
_See also_:
*Note PACK::, *Note SPREAD::

File: gfortran.info, Node: VERIFY, Next: XOR, Prev: UNPACK, Up: Intrinsic Procedures
6.208 `VERIFY' -- Scan a string for the absence of a set of characters
======================================================================
_Description_:
Verifies that all the characters in a SET are present in a STRING.
If BACK is either absent or equals `FALSE', this function returns
the position of the leftmost character of STRING that is not in
SET. If BACK equals `TRUE', the rightmost position is returned. If
all characters of SET are found in STRING, the result is zero.
_Standard_:
F95 and later
_Class_:
Elemental function
_Syntax_:
`RESULT = VERFIY(STRING, SET[, BACK])'
_Arguments_:
STRING Shall be of type `CHARACTER(*)'.
SET Shall be of type `CHARACTER(*)'.
BACK (Optional) shall be of type `LOGICAL'.
_Return value_:
The return value is of type `INTEGER' and of the default integer
kind.
_Example_:
PROGRAM test_verify
WRITE(*,*) VERIFY("FORTRAN", "AO") ! 1, found 'F'
WRITE(*,*) VERIFY("FORTRAN", "FOO") ! 3, found 'R'
WRITE(*,*) VERIFY("FORTRAN", "C++") ! 1, found 'F'
WRITE(*,*) VERIFY("FORTRAN", "C++", .TRUE.) ! 7, found 'N'
WRITE(*,*) VERIFY("FORTRAN", "FORTRAN") ! 0' found none
END PROGRAM
_See also_:
*Note SCAN::, *Note INDEX::

File: gfortran.info, Node: XOR, Prev: VERIFY, Up: Intrinsic Procedures
6.209 `XOR' -- Bitwise logical exclusive OR
===========================================
_Description_:
Bitwise logical exclusive or.
This intrinsic routine is provided for backwards compatibility with
GNU Fortran 77. For integer arguments, programmers should consider
the use of the *Note IEOR:: intrinsic defined by the Fortran
standard.
_Standard_:
GNU extension
_Class_:
Non-elemental function
_Syntax_:
`RESULT = XOR(X, Y)'
_Arguments_:
X The type shall be either `INTEGER(*)' or
`LOGICAL'.
Y The type shall be either `INTEGER(*)' or
`LOGICAL'.
_Return value_:
The return type is either `INTEGER(*)' or `LOGICAL' after
cross-promotion of the arguments.
_Example_:
PROGRAM test_xor
LOGICAL :: T = .TRUE., F = .FALSE.
INTEGER :: a, b
DATA a / Z'F' /, b / Z'3' /
WRITE (*,*) XOR(T, T), XOR(T, F), XOR(F, T), XOR(F, F)
WRITE (*,*) XOR(a, b)
END PROGRAM
_See also_:
F95 elemental function: *Note IEOR::

File: gfortran.info, Node: Contributing, Next: Copying, Prev: Intrinsic Procedures, Up: Top
Contributing
************
Free software is only possible if people contribute to efforts to
create it. We're always in need of more people helping out with ideas
and comments, writing documentation and contributing code.
If you want to contribute to GNU Fortran, have a look at the long
lists of projects you can take on. Some of these projects are small,
some of them are large; some are completely orthogonal to the rest of
what is happening on GNU Fortran, but others are "mainstream" projects
in need of enthusiastic hackers. All of these projects are important!
We'll eventually get around to the things here, but they are also
things doable by someone who is willing and able.
* Menu:
* Contributors::
* Projects::
* Proposed Extensions::

File: gfortran.info, Node: Contributors, Next: Projects, Up: Contributing
Contributors to GNU Fortran
===========================
Most of the parser was hand-crafted by _Andy Vaught_, who is also the
initiator of the whole project. Thanks Andy! Most of the interface
with GCC was written by _Paul Brook_.
The following individuals have contributed code and/or ideas and
significant help to the GNU Fortran project (in no particular order):
- Andy Vaught
- Katherine Holcomb
- Tobias Schlu"ter
- Steven Bosscher
- Toon Moene
- Tim Prince
- Niels Kristian Bech Jensen
- Steven Johnson
- Paul Brook
- Feng Wang
- Bud Davis
- Paul Thomas
- Franc,ois-Xavier Coudert
- Steven G. Kargl
- Jerry Delisle
- Janne Blomqvist
- Erik Edelmann
- Thomas Koenig
- Asher Langton
- Jakub Jelinek
- Roger Sayle
- H.J. Lu
- Richard Henderson
- Richard Sandiford
- Richard Guenther
- Bernhard Fischer
The following people have contributed bug reports, smaller or larger
patches, and much needed feedback and encouragement for the GNU Fortran
project:
- Erik Schnetter
- Bill Clodius
- Kate Hedstrom
Many other individuals have helped debug, test and improve the GNU
Fortran compiler over the past few years, and we welcome you to do the
same! If you already have done so, and you would like to see your name
listed in the list above, please contact us.

File: gfortran.info, Node: Projects, Next: Proposed Extensions, Prev: Contributors, Up: Contributing
Projects
========
_Help build the test suite_
Solicit more code for donation to the test suite. We can keep
code private on request.
_Bug hunting/squishing_
Find bugs and write more test cases! Test cases are especially
very welcome, because it allows us to concentrate on fixing bugs
instead of isolating them.
_Smaller projects ("bug" fixes):_
- Allow init exprs to be numbers raised to integer powers.
- Implement correct rounding.
- Implement F restrictions on Fortran 95 syntax.
- See about making Emacs-parsable error messages.
If you wish to work on the runtime libraries, please contact a project
maintainer.

File: gfortran.info, Node: Proposed Extensions, Prev: Projects, Up: Contributing
Proposed Extensions
===================
Here's a list of proposed extensions for the GNU Fortran compiler, in
no particular order. Most of these are necessary to be fully
compatible with existing Fortran compilers, but they are not part of
the official J3 Fortran 95 standard.
Compiler extensions:
--------------------
* User-specified alignment rules for structures.
* Flag to generate `Makefile' info.
* Automatically extend single precision constants to double.
* Compile code that conserves memory by dynamically allocating
common and module storage either on stack or heap.
* Compile flag to generate code for array conformance checking
(suggest -CC).
* User control of symbol names (underscores, etc).
* Compile setting for maximum size of stack frame size before
spilling parts to static or heap.
* Flag to force local variables into static space.
* Flag to force local variables onto stack.
* Flag for maximum errors before ending compile.
* Option to initialize otherwise uninitialized integer and floating
point variables.
Environment Options
-------------------
* Pluggable library modules for random numbers, linear algebra. LA
should use BLAS calling conventions.
* Environment variables controlling actions on arithmetic exceptions
like overflow, underflow, precision loss--Generate NaN, abort,
default. action.
* Set precision for fp units that support it (i387).
* Variable for setting fp rounding mode.
* Variable to fill uninitialized variables with a user-defined bit
pattern.
* Environment variable controlling filename that is opened for that
unit number.
* Environment variable to clear/trash memory being freed.
* Environment variable to control tracing of allocations and frees.
* Environment variable to display allocated memory at normal program
end.
* Environment variable for filename for * IO-unit.
* Environment variable for temporary file directory.
* Environment variable forcing standard output to be line buffered
(unix).

File: gfortran.info, Node: Copying, Next: GNU Free Documentation License, Prev: Contributing, Up: Top
GNU GENERAL PUBLIC LICENSE
**************************
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
========
The licenses for most software are designed to take away your freedom
to share and change it. By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a
notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program",
below, refers to any such program or work, and a "work based on
the Program" means either the Program or any derivative work under
copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or
translated into another language. (Hereinafter, translation is
included without limitation in the term "modification".) Each
licensee is addressed as "you".
Activities other than copying, distribution and modification are
not covered by this License; they are outside its scope. The act
of running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a work based on
the Program (independent of having been made by running the
Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of
this License along with the Program.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange
for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a. You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b. You must cause any work that you distribute or publish, that
in whole or in part contains or is derived from the Program
or any part thereof, to be licensed as a whole at no charge
to all third parties under the terms of this License.
c. If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display
an announcement including an appropriate copyright notice and
a notice that there is no warranty (or else, saying that you
provide a warranty) and that users may redistribute the
program under these conditions, and telling the user how to
view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an
announcement, your work based on the Program is not required
to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate
works in themselves, then this License, and its terms, do not
apply to those sections when you distribute them as separate
works. But when you distribute the same sections as part of a
whole which is a work based on the Program, the distribution of
the whole must be on the terms of this License, whose permissions
for other licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of
derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the
Program with the Program (or with a work based on the Program) on
a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms
of Sections 1 and 2 above provided that you also do one of the
following:
a. Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for
software interchange; or,
b. Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c. Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with
such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains,
plus any associated interface definition files, plus the scripts
used to control compilation and installation of the executable.
However, as a special exception, the source code distributed need
not include anything that is normally distributed (in either
source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable
runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify
or distribute the Program or its derivative works. These actions
are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying,
distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any
further restrictions on the recipients' exercise of the rights
granted herein. You are not responsible for enforcing compliance
by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the
Program at all. For example, if a patent license would not permit
royalty-free redistribution of the Program by all those who
receive copies directly or indirectly through you, then the only
way you could satisfy both it and this License would be to refrain
entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the section is
intended to apply and the section as a whole is intended to apply
in other circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of
any such claims; this section has the sole purpose of protecting
the integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a
licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed
to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only
in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of
this License.
9. The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but
may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies a version number of this License which applies
to it and "any later version", you have the option of following
the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Program
does not specify a version number of this License, you may choose
any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted
by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE
QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
Appendix: How to Apply These Terms to Your New Programs
=======================================================
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
ONE LINE TO GIVE THE PROGRAM'S NAME AND A BRIEF IDEA OF WHAT IT DOES.
Copyright (C) YEAR NAME OF AUTHOR
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Also add information on how to contact you by electronic and paper
mail.
If the program is interactive, make it output a short notice like
this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) YEAR NAME OF AUTHOR
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the
appropriate parts of the General Public License. Of course, the
commands you use may be called something other than `show w' and `show
c'; they could even be mouse-clicks or menu items--whatever suits your
program.
You should also get your employer (if you work as a programmer) or
your school, if any, to sign a "copyright disclaimer" for the program,
if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
SIGNATURE OF TY COON, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your
program into proprietary programs. If your program is a subroutine
library, you may consider it more useful to permit linking proprietary
applications with the library. If this is what you want to do, use the
GNU Library General Public License instead of this License.

File: gfortran.info, Node: GNU Free Documentation License, Next: Funding, Prev: Copying, Up: Top
GNU Free Documentation License
******************************
Version 1.2, November 2002
Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other
functional and useful document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it,
with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by others.
This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
We have designed this License in order to use it for manuals for
free software, because free software needs free documentation: a
free program should come with manuals providing the same freedoms
that the software does. But this License is not limited to
software manuals; it can be used for any textual work, regardless
of subject matter or whether it is published as a printed book.
We recommend this License principally for works whose purpose is
instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium,
that contains a notice placed by the copyright holder saying it
can be distributed under the terms of this License. Such a notice
grants a world-wide, royalty-free license, unlimited in duration,
to use that work under the conditions stated herein. The
"Document", below, refers to any such manual or work. Any member
of the public is a licensee, and is addressed as "you". You
accept the license if you copy, modify or distribute the work in a
way requiring permission under copyright law.
A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section
of the Document that deals exclusively with the relationship of the
publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could
fall directly within that overall subject. (Thus, if the Document
is in part a textbook of mathematics, a Secondary Section may not
explain any mathematics.) The relationship could be a matter of
historical connection with the subject or with related matters, or
of legal, commercial, philosophical, ethical or political position
regarding them.
The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in
the notice that says that the Document is released under this
License. If a section does not fit the above definition of
Secondary then it is not allowed to be designated as Invariant.
The Document may contain zero Invariant Sections. If the Document
does not identify any Invariant Sections then there are none.
The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images
composed of pixels) generic paint programs or (for drawings) some
widely available drawing editor, and that is suitable for input to
text formatters or for automatic translation to a variety of
formats suitable for input to text formatters. A copy made in an
otherwise Transparent file format whose markup, or absence of
markup, has been arranged to thwart or discourage subsequent
modification by readers is not Transparent. An image format is
not Transparent if used for any substantial amount of text. A
copy that is not "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
SGML or XML using a publicly available DTD, and
standard-conforming simple HTML, PostScript or PDF designed for
human modification. Examples of transparent image formats include
PNG, XCF and JPG. Opaque formats include proprietary formats that
can be read and edited only by proprietary word processors, SGML or
XML for which the DTD and/or processing tools are not generally
available, and the machine-generated HTML, PostScript or PDF
produced by some word processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
works in formats which do not have any title page as such, "Title
Page" means the text near the most prominent appearance of the
work's title, preceding the beginning of the body of the text.
A section "Entitled XYZ" means a named subunit of the Document
whose title either is precisely XYZ or contains XYZ in parentheses
following text that translates XYZ in another language. (Here XYZ
stands for a specific section name mentioned below, such as
"Acknowledgements", "Dedications", "Endorsements", or "History".)
To "Preserve the Title" of such a section when you modify the
Document means that it remains a section "Entitled XYZ" according
to this definition.
The Document may include Warranty Disclaimers next to the notice
which states that this License applies to the Document. These
Warranty Disclaimers are considered to be included by reference in
this License, but only as regards disclaiming warranties: any other
implication that these Warranty Disclaimers may have is void and
has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License
applies to the Document are reproduced in all copies, and that you
add no other conditions whatsoever to those of this License. You
may not use technical measures to obstruct or control the reading
or further copying of the copies you make or distribute. However,
you may accept compensation in exchange for copies. If you
distribute a large enough number of copies you must also follow
the conditions in section 3.
You may also lend copies, under the same conditions stated above,
and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly
have printed covers) of the Document, numbering more than 100, and
the Document's license notice requires Cover Texts, you must
enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
and legibly identify you as the publisher of these copies. The
front cover must present the full title with all words of the
title equally prominent and visible. You may add other material
on the covers in addition. Copying with changes limited to the
covers, as long as they preserve the title of the Document and
satisfy these conditions, can be treated as verbatim copying in
other respects.
If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto
adjacent pages.
If you publish or distribute Opaque copies of the Document
numbering more than 100, you must either include a
machine-readable Transparent copy along with each Opaque copy, or
state in or with each Opaque copy a computer-network location from
which the general network-using public has access to download
using public-standard network protocols a complete Transparent
copy of the Document, free of added material. If you use the
latter option, you must take reasonably prudent steps, when you
begin distribution of Opaque copies in quantity, to ensure that
this Transparent copy will remain thus accessible at the stated
location until at least one year after the last time you
distribute an Opaque copy (directly or through your agents or
retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of
the Document well before redistributing any large number of
copies, to give them a chance to provide you with an updated
version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document
under the conditions of sections 2 and 3 above, provided that you
release the Modified Version under precisely this License, with
the Modified Version filling the role of the Document, thus
licensing distribution and modification of the Modified Version to
whoever possesses a copy of it. In addition, you must do these
things in the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title
distinct from that of the Document, and from those of
previous versions (which should, if there were any, be listed
in the History section of the Document). You may use the
same title as a previous version if the original publisher of
that version gives permission.
B. List on the Title Page, as authors, one or more persons or
entities responsible for authorship of the modifications in
the Modified Version, together with at least five of the
principal authors of the Document (all of its principal
authors, if it has fewer than five), unless they release you
from this requirement.
C. State on the Title page the name of the publisher of the
Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications
adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license
notice giving the public permission to use the Modified
Version under the terms of this License, in the form shown in
the Addendum below.
G. Preserve in that license notice the full lists of Invariant
Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title,
and add to it an item stating at least the title, year, new
authors, and publisher of the Modified Version as given on
the Title Page. If there is no section Entitled "History" in
the Document, create one stating the title, year, authors,
and publisher of the Document as given on its Title Page,
then add an item describing the Modified Version as stated in
the previous sentence.
J. Preserve the network location, if any, given in the Document
for public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in
the "History" section. You may omit a network location for a
work that was published at least four years before the
Document itself, or if the original publisher of the version
it refers to gives permission.
K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the
section all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document,
unaltered in their text and in their titles. Section numbers
or the equivalent are not considered part of the section
titles.
M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled
"Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option
designate some or all of these sections as invariant. To do this,
add their titles to the list of Invariant Sections in the Modified
Version's license notice. These titles must be distinct from any
other section titles.
You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties--for example, statements of peer review or that the text
has been approved by an organization as the authoritative
definition of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end
of the list of Cover Texts in the Modified Version. Only one
passage of Front-Cover Text and one of Back-Cover Text may be
added by (or through arrangements made by) any one entity. If the
Document already includes a cover text for the same cover,
previously added by you or by arrangement made by the same entity
you are acting on behalf of, you may not add another; but you may
replace the old one, on explicit permission from the previous
publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this
License give permission to use their names for publicity for or to
assert or imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under
this License, under the terms defined in section 4 above for
modified versions, provided that you include in the combination
all of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your
combined work in its license notice, and that you preserve all
their Warranty Disclaimers.
The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy. If there are multiple Invariant Sections with the same name
but different contents, make the title of each such section unique
by adding at the end of it, in parentheses, the name of the
original author or publisher of that section if known, or else a
unique number. Make the same adjustment to the section titles in
the list of Invariant Sections in the license notice of the
combined work.
In the combination, you must combine any sections Entitled
"History" in the various original documents, forming one section
Entitled "History"; likewise combine any sections Entitled
"Acknowledgements", and any sections Entitled "Dedications". You
must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other
documents released under this License, and replace the individual
copies of this License in the various documents with a single copy
that is included in the collection, provided that you follow the
rules of this License for verbatim copying of each of the
documents in all other respects.
You may extract a single document from such a collection, and
distribute it individually under this License, provided you insert
a copy of this License into the extracted document, and follow
this License in all other respects regarding verbatim copying of
that document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of
a storage or distribution medium, is called an "aggregate" if the
copyright resulting from the compilation is not used to limit the
legal rights of the compilation's users beyond what the individual
works permit. When the Document is included in an aggregate, this
License does not apply to the other works in the aggregate which
are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half
of the entire aggregate, the Document's Cover Texts may be placed
on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic
form. Otherwise they must appear on printed covers that bracket
the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may
distribute translations of the Document under the terms of section
4. Replacing Invariant Sections with translations requires special
permission from their copyright holders, but you may include
translations of some or all Invariant Sections in addition to the
original versions of these Invariant Sections. You may include a
translation of this License, and all the license notices in the
Document, and any Warranty Disclaimers, provided that you also
include the original English version of this License and the
original versions of those notices and disclaimers. In case of a
disagreement between the translation and the original version of
this License or a notice or disclaimer, the original version will
prevail.
If a section in the Document is Entitled "Acknowledgements",
"Dedications", or "History", the requirement (section 4) to
Preserve its Title (section 1) will typically require changing the
actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document
except as expressly provided for under this License. Any other
attempt to copy, modify, sublicense or distribute the Document is
void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of
the GNU Free Documentation License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns. See
`http://www.gnu.org/copyleft/'.
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If
the Document does not specify a version number of this License,
you may choose any version ever published (not as a draft) by the
Free Software Foundation.
ADDENDUM: How to use this License for your documents
====================================================
To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:
Copyright (C) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is included in the section entitled ``GNU
Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with
the Front-Cover Texts being LIST, and with the Back-Cover Texts
being LIST.
If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.
If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.

File: gfortran.info, Node: Funding, Next: Option Index, Prev: GNU Free Documentation License, Up: Top
Funding Free Software
*********************
If you want to have more free software a few years from now, it makes
sense for you to help encourage people to contribute funds for its
development. The most effective approach known is to encourage
commercial redistributors to donate.
Users of free software systems can boost the pace of development by
encouraging for-a-fee distributors to donate part of their selling price
to free software developers--the Free Software Foundation, and others.
The way to convince distributors to do this is to demand it and
expect it from them. So when you compare distributors, judge them
partly by how much they give to free software development. Show
distributors they must compete to be the one who gives the most.
To make this approach work, you must insist on numbers that you can
compare, such as, "We will donate ten dollars to the Frobnitz project
for each disk sold." Don't be satisfied with a vague promise, such as
"A portion of the profits are donated," since it doesn't give a basis
for comparison.
Even a precise fraction "of the profits from this disk" is not very
meaningful, since creative accounting and unrelated business decisions
can greatly alter what fraction of the sales price counts as profit.
If the price you pay is $50, ten percent of the profit is probably less
than a dollar; it might be a few cents, or nothing at all.
Some redistributors do development work themselves. This is useful
too; but to keep everyone honest, you need to inquire how much they do,
and what kind. Some kinds of development make much more long-term
difference than others. For example, maintaining a separate version of
a program contributes very little; maintaining the standard version of a
program for the whole community contributes much. Easy new ports
contribute little, since someone else would surely do them; difficult
ports such as adding a new CPU to the GNU Compiler Collection
contribute more; major new features or packages contribute the most.
By establishing the idea that supporting further development is "the
proper thing to do" when distributing free software for a fee, we can
assure a steady flow of resources into making more free software.
Copyright (C) 1994 Free Software Foundation, Inc.
Verbatim copying and redistribution of this section is permitted
without royalty; alteration is not permitted.

File: gfortran.info, Node: Option Index, Next: Keyword Index, Prev: Funding, Up: Top
Option Index
************
`gfortran''s command line options are indexed here without any initial
`-' or `--'. Where an option has both positive and negative forms (such
as -foption and -fno-option), relevant entries in the manual are
indexed under the most appropriate form; it may sometimes be useful to
look up both forms.
�[index�]
* Menu:
* fall-intrinsics: Fortran Dialect Options.
(line 18)
* fbounds-check: Code Gen Options. (line 126)
* fconvert=CONVERSION: Runtime Options. (line 9)
* fcray-pointer: Fortran Dialect Options.
(line 80)
* fd-lines-as-code: Fortran Dialect Options.
(line 26)
* fd-lines-as-comments: Fortran Dialect Options.
(line 26)
* fdefault-double-8: Fortran Dialect Options.
(line 33)
* fdefault-integer-8: Fortran Dialect Options.
(line 36)
* fdefault-real-8: Fortran Dialect Options.
(line 40)
* fdollar-ok: Fortran Dialect Options.
(line 44)
* fdump-parse-tree: Debugging Options. (line 10)
* ff2c: Code Gen Options. (line 21)
* ffixed-line-length-N: Fortran Dialect Options.
(line 51)
* ffpe-trap=LIST: Debugging Options. (line 14)
* ffree-form: Fortran Dialect Options.
(line 12)
* ffree-line-length-N: Fortran Dialect Options.
(line 64)
* fimplicit-none: Fortran Dialect Options.
(line 75)
* fmax-errors-N: Error and Warning Options.
(line 27)
* fmax-identifier-length=N: Fortran Dialect Options.
(line 71)
* fmax-stack-var-size: Code Gen Options. (line 135)
* fmax-subrecord-length=LENGTH: Runtime Options. (line 28)
* fno-automatic: Code Gen Options. (line 15)
* fno-backslash: Fortran Dialect Options.
(line 47)
* fno-fixed-form: Fortran Dialect Options.
(line 12)
* fno-underscoring: Code Gen Options. (line 50)
* fopenmp: Fortran Dialect Options.
(line 84)
* fpack-derived: Code Gen Options. (line 145)
* frange-check: Fortran Dialect Options.
(line 92)
* frecord-marker=LENGTH: Runtime Options. (line 20)
* frepack-arrays: Code Gen Options. (line 151)
* fsecond-underscore: Code Gen Options. (line 109)
* fshort-enums <1>: Fortran 2003 status. (line 20)
* fshort-enums: Code Gen Options. (line 161)
* fsyntax-only: Error and Warning Options.
(line 33)
* IDIR: Directory Options. (line 14)
* JDIR: Directory Options. (line 31)
* MDIR: Directory Options. (line 31)
* pedantic: Error and Warning Options.
(line 37)
* pedantic-errors: Error and Warning Options.
(line 55)
* std=STD option: Fortran Dialect Options.
(line 102)
* W: Error and Warning Options.
(line 135)
* w: Error and Warning Options.
(line 59)
* Waliasing: Error and Warning Options.
(line 68)
* Wall: Error and Warning Options.
(line 62)
* Wampersand: Error and Warning Options.
(line 85)
* Wcharacter-truncation: Error and Warning Options.
(line 93)
* Wconversion: Error and Warning Options.
(line 96)
* Werror: Error and Warning Options.
(line 132)
* Wimplicit-interface: Error and Warning Options.
(line 99)
* Wnonstd-intrinsics: Error and Warning Options.
(line 105)
* Wsurprising: Error and Warning Options.
(line 109)
* Wtabs: Error and Warning Options.
(line 122)
* Wunderflow: Error and Warning Options.
(line 128)

File: gfortran.info, Node: Keyword Index, Prev: Option Index, Up: Top
Keyword Index
*************
�[index�]
* Menu:
* $: Fortran Dialect Options.
(line 44)
* &: Error and Warning Options.
(line 85)
* [...]: Fortran 2003 status. (line 13)
* ABORT: ABORT. (line 6)
* ABS: ABS. (line 6)
* absolute value: ABS. (line 6)
* ACCESS: ACCESS. (line 6)
* ACCESS='STREAM' I/O: Fortran 2003 status. (line 32)
* ACHAR: ACHAR. (line 6)
* ACOS: ACOS. (line 6)
* ACOSH: ACOSH. (line 6)
* adjust string <1>: ADJUSTR. (line 6)
* adjust string: ADJUSTL. (line 6)
* ADJUSTL: ADJUSTL. (line 6)
* ADJUSTR: ADJUSTR. (line 6)
* AIMAG: AIMAG. (line 6)
* AINT: AINT. (line 6)
* ALARM: ALARM. (line 6)
* aliasing: Error and Warning Options.
(line 68)
* ALL: ALL. (line 6)
* all warnings: Error and Warning Options.
(line 62)
* ALLOCATABLE components of derived types: Fortran 2003 status.
(line 30)
* ALLOCATABLE dummy arguments: Fortran 2003 status. (line 26)
* ALLOCATABLE function results: Fortran 2003 status. (line 28)
* ALLOCATED: ALLOCATED. (line 6)
* allocation, moving: MOVE_ALLOC. (line 6)
* allocation, status: ALLOCATED. (line 6)
* ALOG: LOG. (line 6)
* ALOG10: LOG10. (line 6)
* AMAX0: MAX. (line 6)
* AMAX1: MAX. (line 6)
* AMIN0: MIN. (line 6)
* AMIN1: MIN. (line 6)
* AMOD: MOD. (line 6)
* AND: AND. (line 6)
* ANINT: ANINT. (line 6)
* ANY: ANY. (line 6)
* area hyperbolic cosine: ACOSH. (line 6)
* area hyperbolic sine: ASINH. (line 6)
* area hyperbolic tangent: ATANH. (line 6)
* arguments, to program <1>: IARGC. (line 6)
* arguments, to program <2>: GET_COMMAND_ARGUMENT.
(line 6)
* arguments, to program <3>: GET_COMMAND. (line 6)
* arguments, to program <4>: GETARG. (line 6)
* arguments, to program: COMMAND_ARGUMENT_COUNT.
(line 6)
* array, add elements: SUM. (line 6)
* array, apply condition <1>: ANY. (line 6)
* array, apply condition: ALL. (line 6)
* array, bounds checking: Code Gen Options. (line 126)
* array, change dimensions: RESHAPE. (line 6)
* array, combine arrays: MERGE. (line 6)
* array, condition testing <1>: ANY. (line 6)
* array, condition testing: ALL. (line 6)
* array, conditionally add elements: SUM. (line 6)
* array, conditionally count elements: COUNT. (line 6)
* array, conditionally multiply elements: PRODUCT. (line 6)
* array, constructors: Fortran 2003 status. (line 13)
* array, count elements: SIZE. (line 6)
* array, duplicate dimensions: SPREAD. (line 6)
* array, duplicate elementes: SPREAD. (line 6)
* array, element counting: COUNT. (line 6)
* array, gather elements: PACK. (line 6)
* array, increase dimension <1>: UNPACK. (line 6)
* array, increase dimension: SPREAD. (line 6)
* array, indices of type real: Real array indices. (line 6)
* array, location of maximum element: MAXLOC. (line 6)
* array, location of minimum element: MINLOC. (line 6)
* array, lower bound: LBOUND. (line 6)
* array, maximum value: MAXVAL. (line 6)
* array, merge arrays: MERGE. (line 6)
* array, minmum value: MINVAL. (line 6)
* array, multiply elements: PRODUCT. (line 6)
* array, number of elements <1>: SIZE. (line 6)
* array, number of elements: COUNT. (line 6)
* array, packing: PACK. (line 6)
* array, permutation: CSHIFT. (line 6)
* array, product: PRODUCT. (line 6)
* array, reduce dimension: PACK. (line 6)
* array, rotate: CSHIFT. (line 6)
* array, scatter elements: UNPACK. (line 6)
* array, shape: SHAPE. (line 6)
* array, shift: EOSHIFT. (line 6)
* array, shift circularly: CSHIFT. (line 6)
* array, size: SIZE. (line 6)
* array, sum: SUM. (line 6)
* array, transmogrify: RESHAPE. (line 6)
* array, transpose: TRANSPOSE. (line 6)
* array, unpacking: UNPACK. (line 6)
* array, upper bound: UBOUND. (line 6)
* ASCII collating sequence <1>: IACHAR. (line 6)
* ASCII collating sequence: ACHAR. (line 6)
* ASIN: ASIN. (line 6)
* ASINH <1>: ATANH. (line 6)
* ASINH: ASINH. (line 6)
* ASSOCIATED: ASSOCIATED. (line 6)
* association status: ASSOCIATED. (line 6)
* ATAN: ATAN. (line 6)
* ATAN2: ATAN2. (line 6)
* Authors: Contributors. (line 6)
* backslash: Fortran Dialect Options.
(line 47)
* BESJ0: BESJ0. (line 6)
* BESJ1: BESJ1. (line 6)
* BESJN: BESJN. (line 6)
* Bessel function, first kind <1>: BESJN. (line 6)
* Bessel function, first kind <2>: BESJ1. (line 6)
* Bessel function, first kind: BESJ0. (line 6)
* Bessel function, second kind <1>: BESYN. (line 6)
* Bessel function, second kind <2>: BESY1. (line 6)
* Bessel function, second kind: BESY0. (line 6)
* BESY0: BESY0. (line 6)
* BESY1: BESY1. (line 6)
* BESYN: BESYN. (line 6)
* BIT_SIZE: BIT_SIZE. (line 6)
* bits, clear: IBCLR. (line 6)
* bits, extract: IBITS. (line 6)
* bits, get: IBITS. (line 6)
* bits, move <1>: TRANSFER. (line 6)
* bits, move: MVBITS. (line 6)
* bits, negate: NOT. (line 6)
* bits, number of: BIT_SIZE. (line 6)
* bits, set: IBSET. (line 6)
* bits, shift: ISHFT. (line 6)
* bits, shift circular: ISHFTC. (line 6)
* bits, shift left: LSHIFT. (line 6)
* bits, shift right: RSHIFT. (line 6)
* bits, testing: BTEST. (line 6)
* bits, unset: IBCLR. (line 6)
* bitwise logical and <1>: IAND. (line 6)
* bitwise logical and: AND. (line 6)
* bitwise logical exclusive or <1>: XOR. (line 6)
* bitwise logical exclusive or: IEOR. (line 6)
* bitwise logical not: NOT. (line 6)
* bitwise logical or <1>: OR. (line 6)
* bitwise logical or: IOR. (line 6)
* bounds checking: Code Gen Options. (line 126)
* BOZ literal constants: BOZ literal constants.
(line 6)
* BTEST: BTEST. (line 6)
* CABS: ABS. (line 6)
* calling convention: Code Gen Options. (line 21)
* CCOS: COS. (line 6)
* CDABS: ABS. (line 6)
* CDCOS: COS. (line 6)
* CDEXP: EXP. (line 6)
* CDLOG: LOG. (line 6)
* CDSIN: SIN. (line 6)
* CDSQRT: SQRT. (line 6)
* ceiling: CEILING. (line 6)
* CEILING: CEILING. (line 6)
* ceiling: ANINT. (line 6)
* CEXP: EXP. (line 6)
* CHAR: CHAR. (line 6)
* character set: Fortran Dialect Options.
(line 44)
* CHDIR: CHDIR. (line 6)
* checking subscripts: Code Gen Options. (line 126)
* CHMOD: CHMOD. (line 6)
* clock ticks <1>: SYSTEM_CLOCK. (line 6)
* clock ticks <2>: MCLOCK8. (line 6)
* clock ticks: MCLOCK. (line 6)
* CLOG: LOG. (line 6)
* CMPLX: CMPLX. (line 6)
* code generation, conventions: Code Gen Options. (line 6)
* collating sequence, ASCII <1>: IACHAR. (line 6)
* collating sequence, ASCII: ACHAR. (line 6)
* command options: Invoking GNU Fortran.
(line 6)
* command-line arguments <1>: IARGC. (line 6)
* command-line arguments <2>: GET_COMMAND_ARGUMENT.
(line 6)
* command-line arguments <3>: GET_COMMAND. (line 6)
* command-line arguments <4>: GETARG. (line 6)
* command-line arguments: COMMAND_ARGUMENT_COUNT.
(line 6)
* command-line arguments, number of <1>: IARGC. (line 6)
* command-line arguments, number of: COMMAND_ARGUMENT_COUNT.
(line 6)
* COMMAND_ARGUMENT_COUNT: COMMAND_ARGUMENT_COUNT.
(line 6)
* COMPLEX: COMPLEX. (line 6)
* complex conjugate: CONJG. (line 6)
* complex numbers, conversion to <1>: DCMPLX. (line 6)
* complex numbers, conversion to <2>: COMPLEX. (line 6)
* complex numbers, conversion to: CMPLX. (line 6)
* complex numbers, imaginary part: AIMAG. (line 6)
* complex numbers, real part <1>: REAL. (line 6)
* complex numbers, real part: DREAL. (line 6)
* CONJG: CONJG. (line 6)
* Contributing: Contributing. (line 6)
* Contributors: Contributors. (line 6)
* conversion: Error and Warning Options.
(line 96)
* conversion, to character: CHAR. (line 6)
* conversion, to complex <1>: DCMPLX. (line 6)
* conversion, to complex <2>: COMPLEX. (line 6)
* conversion, to complex: CMPLX. (line 6)
* conversion, to integer <1>: LONG. (line 6)
* conversion, to integer <2>: INT8. (line 6)
* conversion, to integer <3>: INT2. (line 6)
* conversion, to integer <4>: INT. (line 6)
* conversion, to integer <5>: ICHAR. (line 6)
* conversion, to integer <6>: IACHAR. (line 6)
* conversion, to integer: Implicitly convert LOGICAL and INTEGER values.
(line 6)
* conversion, to logical <1>: LOGICAL. (line 6)
* conversion, to logical: Implicitly convert LOGICAL and INTEGER values.
(line 6)
* conversion, to real <1>: SNGL. (line 6)
* conversion, to real <2>: REAL. (line 6)
* conversion, to real <3>: FLOAT. (line 6)
* conversion, to real <4>: DFLOAT. (line 6)
* conversion, to real: DBLE. (line 6)
* conversion, to string: CTIME. (line 6)
* CONVERT specifier: CONVERT specifier. (line 6)
* core, dump: ABORT. (line 6)
* COS: COS. (line 6)
* COSH: COSH. (line 6)
* cosine: COS. (line 6)
* cosine, hyperbolic: COSH. (line 6)
* cosine, hyperbolic, inverse: ACOSH. (line 6)
* cosine, inverse: ACOS. (line 6)
* COUNT: COUNT. (line 6)
* CPU_TIME: CPU_TIME. (line 6)
* Credits: Contributors. (line 6)
* CSHIFT: CSHIFT. (line 6)
* CSIN: SIN. (line 6)
* CSQRT: SQRT. (line 6)
* CTIME: CTIME. (line 6)
* current date <1>: IDATE. (line 6)
* current date <2>: FDATE. (line 6)
* current date: DATE_AND_TIME. (line 6)
* current time <1>: TIME8. (line 6)
* current time <2>: TIME. (line 6)
* current time <3>: ITIME. (line 6)
* current time <4>: FDATE. (line 6)
* current time: DATE_AND_TIME. (line 6)
* DABS: ABS. (line 6)
* DACOS: ACOS. (line 6)
* DACOSH: ACOSH. (line 6)
* DASIN: ASIN. (line 6)
* DASINH <1>: ATANH. (line 6)
* DASINH: ASINH. (line 6)
* DATAN: ATAN. (line 6)
* DATAN2: ATAN2. (line 6)
* date, current <1>: IDATE. (line 6)
* date, current <2>: FDATE. (line 6)
* date, current: DATE_AND_TIME. (line 6)
* DATE_AND_TIME: DATE_AND_TIME. (line 6)
* DBESJ0: BESJ0. (line 6)
* DBESJ1: BESJ1. (line 6)
* DBESJN: BESJN. (line 6)
* DBESY0: BESY0. (line 6)
* DBESY1: BESY1. (line 6)
* DBESYN: BESYN. (line 6)
* DBLE: DBLE. (line 6)
* DCMPLX: DCMPLX. (line 6)
* DCONJG: CONJG. (line 6)
* DCOS: COS. (line 6)
* DCOSH: COSH. (line 6)
* DDIM: DIM. (line 6)
* debugging information options: Debugging Options. (line 6)
* delayed execution <1>: SLEEP. (line 6)
* delayed execution: ALARM. (line 6)
* DEXP: EXP. (line 6)
* DFLOAT: DFLOAT. (line 6)
* dialect options: Fortran Dialect Options.
(line 6)
* DIGITS: DIGITS. (line 6)
* DIM: DIM. (line 6)
* DIMAG: AIMAG. (line 6)
* DINT: AINT. (line 6)
* directive, INCLUDE: Directory Options. (line 6)
* directory, options: Directory Options. (line 6)
* directory, search paths for inclusion: Directory Options. (line 14)
* division, modulo: MODULO. (line 6)
* division, remainder: MOD. (line 6)
* DLOG: LOG. (line 6)
* DLOG10: LOG10. (line 6)
* DMAX1: MAX. (line 6)
* DMIN1: MIN. (line 6)
* DMOD: MOD. (line 6)
* DNINT: ANINT. (line 6)
* dot product: DOT_PRODUCT. (line 6)
* DOT_PRODUCT: DOT_PRODUCT. (line 6)
* DPROD: DPROD. (line 6)
* DREAL: DREAL. (line 6)
* DSIGN: SIGN. (line 6)
* DSIN: SIN. (line 6)
* DSINH: SINH. (line 6)
* DSQRT: SQRT. (line 6)
* DTAN: TAN. (line 6)
* DTANH: TANH. (line 6)
* DTIME: DTIME. (line 6)
* elapsed time <1>: SECOND. (line 6)
* elapsed time <2>: SECNDS. (line 6)
* elapsed time: DTIME. (line 6)
* ENUM statement: Fortran 2003 status. (line 20)
* ENUMERATOR statement: Fortran 2003 status. (line 20)
* environment variable <1>: GET_ENVIRONMENT_VARIABLE.
(line 6)
* environment variable <2>: GETENV. (line 6)
* environment variable <3>: Runtime. (line 6)
* environment variable: Environment Variables.
(line 6)
* EOSHIFT: EOSHIFT. (line 6)
* EPSILON: EPSILON. (line 6)
* ERF: ERF. (line 6)
* ERFC: ERFC. (line 6)
* error function: ERF. (line 6)
* error function, complementary: ERFC. (line 6)
* errors, limiting: Error and Warning Options.
(line 27)
* escape characters: Fortran Dialect Options.
(line 47)
* ETIME: ETIME. (line 6)
* EXIT: EXIT. (line 6)
* EXP: EXP. (line 6)
* EXPONENT: EXPONENT. (line 6)
* exponential function: EXP. (line 6)
* exponential function, inverse <1>: LOG10. (line 6)
* exponential function, inverse: LOG. (line 6)
* Extension: Extensions. (line 6)
* extra warnings: Error and Warning Options.
(line 135)
* f2c calling convention: Code Gen Options. (line 21)
* FDATE: FDATE. (line 6)
* FDL, GNU Free Documentation License: GNU Free Documentation License.
(line 6)
* FGET: FGET. (line 6)
* FGETC: FGETC. (line 6)
* file format, fixed: Fortran Dialect Options.
(line 12)
* file format, free: Fortran Dialect Options.
(line 12)
* file operation, file number: FNUM. (line 6)
* file operation, flush: FLUSH. (line 6)
* file operation, position <1>: FTELL. (line 6)
* file operation, position: FSEEK. (line 6)
* file operation, read character <1>: FGETC. (line 6)
* file operation, read character: FGET. (line 6)
* file operation, seek: FSEEK. (line 6)
* file operation, write character <1>: FPUTC. (line 6)
* file operation, write character: FPUT. (line 6)
* file system, access mode: ACCESS. (line 6)
* file system, change access mode: CHMOD. (line 6)
* file system, create link <1>: SYMLNK. (line 6)
* file system, create link: LINK. (line 6)
* file system, file creation mask: UMASK. (line 6)
* file system, file status <1>: STAT. (line 6)
* file system, file status <2>: LSTAT. (line 6)
* file system, file status: FSTAT. (line 6)
* file system, hard link: LINK. (line 6)
* file system, remove file: UNLINK. (line 6)
* file system, rename file: RENAME. (line 6)
* file system, soft link: SYMLNK. (line 6)
* FLOAT: FLOAT. (line 6)
* floating point, exponent: EXPONENT. (line 6)
* floating point, fraction: FRACTION. (line 6)
* floating point, nearest different: NEAREST. (line 6)
* floating point, relative spacing <1>: SPACING. (line 6)
* floating point, relative spacing: RRSPACING. (line 6)
* floating point, scale: SCALE. (line 6)
* floating point, set exponent: SET_EXPONENT. (line 6)
* floor: FLOOR. (line 6)
* FLOOR: FLOOR. (line 6)
* floor: AINT. (line 6)
* FLUSH: FLUSH. (line 6)
* FLUSH statement: Fortran 2003 status. (line 16)
* FNUM: FNUM. (line 6)
* Fortran 77: GNU Fortran and G77. (line 6)
* FPUT: FPUT. (line 6)
* FPUTC: FPUTC. (line 6)
* FRACTION: FRACTION. (line 6)
* FREE: FREE. (line 6)
* FSEEK: FSEEK. (line 6)
* FSTAT: FSTAT. (line 6)
* FTELL: FTELL. (line 6)
* g77: GNU Fortran and G77. (line 6)
* g77 calling convention: Code Gen Options. (line 21)
* GCC: GNU Fortran and GCC. (line 6)
* GERROR: GERROR. (line 6)
* GET_COMMAND: GET_COMMAND. (line 6)
* GET_COMMAND_ARGUMENT: GET_COMMAND_ARGUMENT.
(line 6)
* GET_ENVIRONMENT_VARIABLE: GET_ENVIRONMENT_VARIABLE.
(line 6)
* GETARG: GETARG. (line 6)
* GETCWD: GETCWD. (line 6)
* GETENV: GETENV. (line 6)
* GETGID: GETGID. (line 6)
* GETLOG: GETLOG. (line 6)
* GETPID: GETPID. (line 6)
* GETUID: GETUID. (line 6)
* GMTIME: GMTIME. (line 6)
* GNU Compiler Collection: GNU Fortran and GCC. (line 6)
* GNU Fortran command options: Invoking GNU Fortran.
(line 6)
* Hollerith constants: Hollerith constants support.
(line 6)
* HOSTNM: HOSTNM. (line 6)
* HUGE: HUGE. (line 6)
* hyperbolic arccosine: ACOSH. (line 6)
* hyperbolic arcsine: ASINH. (line 6)
* hyperbolic arctangent: ATANH. (line 6)
* hyperbolic cosine: COSH. (line 6)
* hyperbolic function, cosine: COSH. (line 6)
* hyperbolic function, cosine, inverse: ACOSH. (line 6)
* hyperbolic function, sine: SINH. (line 6)
* hyperbolic function, sine, inverse: ASINH. (line 6)
* hyperbolic function, tangent: TANH. (line 6)
* hyperbolic function, tangent, inverse: ATANH. (line 6)
* hyperbolic sine: SINH. (line 6)
* hyperbolic tangent: TANH. (line 6)
* I/O item lists: I/O item lists. (line 6)
* IABS: ABS. (line 6)
* IACHAR: IACHAR. (line 6)
* IAND: IAND. (line 6)
* IARGC: IARGC. (line 6)
* IBCLR: IBCLR. (line 6)
* IBITS: IBITS. (line 6)
* IBSET: IBSET. (line 6)
* ICHAR: ICHAR. (line 6)
* IDATE: IDATE. (line 6)
* IDIM: DIM. (line 6)
* IDINT: INT. (line 6)
* IDNINT: NINT. (line 6)
* IEOR: IEOR. (line 6)
* IERRNO: IERRNO. (line 6)
* IFIX: INT. (line 6)
* IMAG: AIMAG. (line 6)
* IMAGPART: AIMAG. (line 6)
* INCLUDE directive: Directory Options. (line 6)
* inclusion, directory search paths for: Directory Options. (line 14)
* INDEX: INDEX. (line 6)
* INT: INT. (line 6)
* INT2: INT2. (line 6)
* INT8: INT8. (line 6)
* integer kind: SELECTED_INT_KIND. (line 6)
* intrinsic procedures: Intrinsic Procedures.
(line 6)
* Introduction: Top. (line 6)
* IOMSG= specifier: Fortran 2003 status. (line 18)
* IOR: IOR. (line 6)
* IRAND: IRAND. (line 6)
* ISATTY: ISATTY. (line 6)
* ISHFT: ISHFT. (line 6)
* ISHFTC: ISHFTC. (line 6)
* ISIGN: SIGN. (line 6)
* ITIME: ITIME. (line 6)
* KILL: KILL. (line 6)
* kind: KIND. (line 6)
* KIND: KIND. (line 6)
* kind, integer: SELECTED_INT_KIND. (line 6)
* kind, old-style: Old-style kind specifications.
(line 6)
* kind, real: SELECTED_REAL_KIND. (line 6)
* language, dialect options: Fortran Dialect Options.
(line 6)
* LBOUND: LBOUND. (line 6)
* LEN: LEN. (line 6)
* LEN_TRIM: LEN_TRIM. (line 6)
* lexical comparison of strings <1>: LLT. (line 6)
* lexical comparison of strings <2>: LLE. (line 6)
* lexical comparison of strings <3>: LGT. (line 6)
* lexical comparison of strings: LGE. (line 6)
* LGE: LGE. (line 6)
* LGT: LGT. (line 6)
* libf2c calling convention: Code Gen Options. (line 21)
* limits, largest number: HUGE. (line 6)
* limits, smallest number: TINY. (line 6)
* LINK: LINK. (line 6)
* LLE: LLE. (line 6)
* LLT: LLT. (line 6)
* LNBLNK: LNBLNK. (line 6)
* LOC: LOC. (line 6)
* location of a variable in memory: LOC. (line 6)
* LOG: LOG. (line 6)
* LOG10: LOG10. (line 6)
* logarithmic function <1>: LOG10. (line 6)
* logarithmic function: LOG. (line 6)
* logarithmic function, inverse: EXP. (line 6)
* LOGICAL: LOGICAL. (line 6)
* logical and, bitwise <1>: IAND. (line 6)
* logical and, bitwise: AND. (line 6)
* logical exclusive or, bitwise <1>: XOR. (line 6)
* logical exclusive or, bitwise: IEOR. (line 6)
* logical not, bitwise: NOT. (line 6)
* logical or, bitwise <1>: OR. (line 6)
* logical or, bitwise: IOR. (line 6)
* login name: GETLOG. (line 6)
* LONG: LONG. (line 6)
* LSHIFT: LSHIFT. (line 6)
* LSTAT: LSTAT. (line 6)
* LTIME: LTIME. (line 6)
* MALLOC: MALLOC. (line 6)
* MATMUL: MATMUL. (line 6)
* matrix multiplication: MATMUL. (line 6)
* matrix, transpose: TRANSPOSE. (line 6)
* MAX: MAX. (line 6)
* MAX0: MAX. (line 6)
* MAX1: MAX. (line 6)
* MAXEXPONENT: MAXEXPONENT. (line 6)
* maximum value <1>: MAXVAL. (line 6)
* maximum value: MAX. (line 6)
* MAXLOC: MAXLOC. (line 6)
* MAXVAL: MAXVAL. (line 6)
* MCLOCK: MCLOCK. (line 6)
* MCLOCK8: MCLOCK8. (line 6)
* MERGE: MERGE. (line 6)
* messages, error: Error and Warning Options.
(line 6)
* messages, warning: Error and Warning Options.
(line 6)
* MIN: MIN. (line 6)
* MIN0: MIN. (line 6)
* MIN1: MIN. (line 6)
* MINEXPONENT: MINEXPONENT. (line 6)
* minimum value <1>: MINVAL. (line 6)
* minimum value: MIN. (line 6)
* MINLOC: MINLOC. (line 6)
* MINVAL: MINVAL. (line 6)
* MOD: MOD. (line 6)
* model representation, base: RADIX. (line 6)
* model representation, epsilon: EPSILON. (line 6)
* model representation, largest number: HUGE. (line 6)
* model representation, maximum exponent: MAXEXPONENT. (line 6)
* model representation, minimum exponent: MINEXPONENT. (line 6)
* model representation, precision: PRECISION. (line 6)
* model representation, radix: RADIX. (line 6)
* model representation, range: RANGE. (line 6)
* model representation, significant digits: DIGITS. (line 6)
* model representation, smallest number: TINY. (line 6)
* module search path: Directory Options. (line 14)
* modulo: MODULO. (line 6)
* MODULO: MODULO. (line 6)
* MOVE_ALLOC: MOVE_ALLOC. (line 6)
* moving allocation: MOVE_ALLOC. (line 6)
* multiply array elements: PRODUCT. (line 6)
* MVBITS: MVBITS. (line 6)
* Namelist: Extensions to namelist.
(line 6)
* NEAREST: NEAREST. (line 6)
* NEW_LINE: NEW_LINE. (line 6)
* newline: NEW_LINE. (line 6)
* NINT: NINT. (line 6)
* NOT: NOT. (line 6)
* NULL: NULL. (line 6)
* OpenMP <1>: OpenMP. (line 6)
* OpenMP: Fortran Dialect Options.
(line 84)
* operators, unary: Unary operators. (line 6)
* options, code generation: Code Gen Options. (line 6)
* options, debugging: Debugging Options. (line 6)
* options, dialect: Fortran Dialect Options.
(line 6)
* options, directory search: Directory Options. (line 6)
* options, errors: Error and Warning Options.
(line 6)
* options, fortran dialect: Fortran Dialect Options.
(line 12)
* options, gfortran command: Invoking GNU Fortran.
(line 6)
* options, negative forms: Invoking GNU Fortran.
(line 13)
* options, run-time: Code Gen Options. (line 6)
* options, runtime: Runtime Options. (line 6)
* options, warnings: Error and Warning Options.
(line 6)
* OR: OR. (line 6)
* output, newline: NEW_LINE. (line 6)
* PACK: PACK. (line 6)
* paths, search: Directory Options. (line 14)
* PERROR: PERROR. (line 6)
* pointer, cray <1>: MALLOC. (line 6)
* pointer, cray <2>: FREE. (line 6)
* pointer, cray: Cray pointers. (line 6)
* pointer, disassociated: NULL. (line 6)
* pointer, status <1>: NULL. (line 6)
* pointer, status: ASSOCIATED. (line 6)
* positive difference: DIM. (line 6)
* PRECISION: PRECISION. (line 6)
* PRESENT: PRESENT. (line 6)
* process id: GETPID. (line 6)
* PRODUCT: PRODUCT. (line 6)
* product, double-precision: DPROD. (line 6)
* product, matrix: MATMUL. (line 6)
* product, vector: DOT_PRODUCT. (line 6)
* program termination: EXIT. (line 6)
* program termination, with core dump: ABORT. (line 6)
* RADIX: RADIX. (line 6)
* RAN: RAN. (line 6)
* RAND: RAND. (line 6)
* random number generation <1>: RANDOM_NUMBER. (line 6)
* random number generation <2>: RAND. (line 6)
* random number generation <3>: RAN. (line 6)
* random number generation: IRAND. (line 6)
* random number generation, seeding <1>: SRAND. (line 6)
* random number generation, seeding: RANDOM_SEED. (line 6)
* RANDOM_NUMBER: RANDOM_NUMBER. (line 6)
* RANDOM_SEED: RANDOM_SEED. (line 6)
* RANGE: RANGE. (line 6)
* range checking: Code Gen Options. (line 126)
* read character, stream mode <1>: FGETC. (line 6)
* read character, stream mode: FGET. (line 6)
* REAL: REAL. (line 6)
* real kind: SELECTED_REAL_KIND. (line 6)
* real number, exponent: EXPONENT. (line 6)
* real number, fraction: FRACTION. (line 6)
* real number, nearest different: NEAREST. (line 6)
* real number, relative spacing <1>: SPACING. (line 6)
* real number, relative spacing: RRSPACING. (line 6)
* real number, scale: SCALE. (line 6)
* real number, set exponent: SET_EXPONENT. (line 6)
* REALPART: REAL. (line 6)
* remainder: MOD. (line 6)
* RENAME: RENAME. (line 6)
* repacking arrays: Code Gen Options. (line 151)
* REPEAT: REPEAT. (line 6)
* RESHAPE: RESHAPE. (line 6)
* root: SQRT. (line 6)
* rounding, ceiling <1>: CEILING. (line 6)
* rounding, ceiling: ANINT. (line 6)
* rounding, floor <1>: FLOOR. (line 6)
* rounding, floor: AINT. (line 6)
* rounding, nearest whole number: NINT. (line 6)
* RRSPACING: RRSPACING. (line 6)
* RSHIFT: RSHIFT. (line 6)
* SAVE statement: Code Gen Options. (line 15)
* SCALE: SCALE. (line 6)
* SCAN: SCAN. (line 6)
* search path: Directory Options. (line 6)
* search paths, for included files: Directory Options. (line 14)
* SECNDS: SECNDS. (line 6)
* SECOND: SECOND. (line 6)
* seeding a random number generator <1>: SRAND. (line 6)
* seeding a random number generator: RANDOM_SEED. (line 6)
* SELECTED_INT_KIND: SELECTED_INT_KIND. (line 6)
* SELECTED_REAL_KIND: SELECTED_REAL_KIND. (line 6)
* SET_EXPONENT: SET_EXPONENT. (line 6)
* SHAPE: SHAPE. (line 6)
* SHORT: INT2. (line 6)
* SIGN: SIGN. (line 6)
* sign copying: SIGN. (line 6)
* SIGNAL: SIGNAL. (line 6)
* SIN: SIN. (line 6)
* sine: SIN. (line 6)
* sine, hyperbolic: SINH. (line 6)
* sine, hyperbolic, inverse: ASINH. (line 6)
* sine, inverse: ASIN. (line 6)
* SINH: SINH. (line 6)
* SIZE: SIZE. (line 6)
* size of a variable, in bits: BIT_SIZE. (line 6)
* SLEEP: SLEEP. (line 6)
* SNGL: SNGL. (line 6)
* SPACING: SPACING. (line 6)
* SPREAD: SPREAD. (line 6)
* SQRT: SQRT. (line 6)
* square-root: SQRT. (line 6)
* SRAND: SRAND. (line 6)
* Standards: Standards. (line 6)
* STAT: STAT. (line 6)
* statement, ENUM: Fortran 2003 status. (line 20)
* statement, ENUMERATOR: Fortran 2003 status. (line 20)
* statement, FLUSH: Fortran 2003 status. (line 16)
* statement, SAVE: Code Gen Options. (line 15)
* STREAM I/O: Fortran 2003 status. (line 32)
* stream mode, read character <1>: FGETC. (line 6)
* stream mode, read character: FGET. (line 6)
* stream mode, write character <1>: FPUTC. (line 6)
* stream mode, write character: FPUT. (line 6)
* string, adjust left: ADJUSTL. (line 6)
* string, adjust right: ADJUSTR. (line 6)
* string, comparison <1>: LLT. (line 6)
* string, comparison <2>: LLE. (line 6)
* string, comparison <3>: LGT. (line 6)
* string, comparison: LGE. (line 6)
* string, concatenate: REPEAT. (line 6)
* string, find missing set: VERIFY. (line 6)
* string, find non-blank character: LNBLNK. (line 6)
* string, find subset: SCAN. (line 6)
* string, find substring: INDEX. (line 6)
* string, length: LEN. (line 6)
* string, length, without trailing whitespace: LEN_TRIM. (line 6)
* string, remove trailing whitespace: TRIM. (line 6)
* string, repeat: REPEAT. (line 6)
* structure packing: Code Gen Options. (line 145)
* subscript checking: Code Gen Options. (line 126)
* substring position: INDEX. (line 6)
* SUM: SUM. (line 6)
* sum array elements: SUM. (line 6)
* suppressing warnings: Error and Warning Options.
(line 6)
* symbol names: Fortran Dialect Options.
(line 44)
* symbol names, transforming: Code Gen Options. (line 50)
* symbol names, underscores: Code Gen Options. (line 50)
* SYMLNK: SYMLNK. (line 6)
* syntax checking: Error and Warning Options.
(line 33)
* SYSTEM: SYSTEM. (line 6)
* system, error handling <1>: PERROR. (line 6)
* system, error handling <2>: IERRNO. (line 6)
* system, error handling: GERROR. (line 6)
* system, group id: GETGID. (line 6)
* system, host name: HOSTNM. (line 6)
* system, login name: GETLOG. (line 6)
* system, process id: GETPID. (line 6)
* system, signal handling: SIGNAL. (line 6)
* system, system call: SYSTEM. (line 6)
* system, terminal <1>: TTYNAM. (line 6)
* system, terminal: ISATTY. (line 6)
* system, user id: GETUID. (line 6)
* system, working directory <1>: GETCWD. (line 6)
* system, working directory: CHDIR. (line 6)
* SYSTEM_CLOCK: SYSTEM_CLOCK. (line 6)
* tabulators: Error and Warning Options.
(line 122)
* TAN: TAN. (line 6)
* tangent: TAN. (line 6)
* tangent, hyperbolic: TANH. (line 6)
* tangent, hyperbolic, inverse: ATANH. (line 6)
* tangent, inverse <1>: ATAN2. (line 6)
* tangent, inverse: ATAN. (line 6)
* TANH: TANH. (line 6)
* terminate program: EXIT. (line 6)
* terminate program, with core dump: ABORT. (line 6)
* TIME: TIME. (line 6)
* time, clock ticks <1>: SYSTEM_CLOCK. (line 6)
* time, clock ticks <2>: MCLOCK8. (line 6)
* time, clock ticks: MCLOCK. (line 6)
* time, conversion to GMT info: GMTIME. (line 6)
* time, conversion to string: CTIME. (line 6)
* time, converstion to local time info: LTIME. (line 6)
* time, current <1>: TIME8. (line 6)
* time, current <2>: TIME. (line 6)
* time, current <3>: ITIME. (line 6)
* time, current <4>: FDATE. (line 6)
* time, current: DATE_AND_TIME. (line 6)
* time, elapsed <1>: SECOND. (line 6)
* time, elapsed <2>: SECNDS. (line 6)
* time, elapsed <3>: ETIME. (line 6)
* time, elapsed <4>: DTIME. (line 6)
* time, elapsed: CPU_TIME. (line 6)
* TIME8: TIME8. (line 6)
* TINY: TINY. (line 6)
* TR 15581: Fortran 2003 status. (line 25)
* TRANSFER: TRANSFER. (line 6)
* transforming symbol names: Code Gen Options. (line 50)
* transpose: TRANSPOSE. (line 6)
* TRANSPOSE: TRANSPOSE. (line 6)
* trigonometric function, cosine: COS. (line 6)
* trigonometric function, cosine, inverse: ACOS. (line 6)
* trigonometric function, sine: SIN. (line 6)
* trigonometric function, sine, inverse: ASIN. (line 6)
* trigonometric function, tangent: TAN. (line 6)
* trigonometric function, tangent, inverse <1>: ATAN2. (line 6)
* trigonometric function, tangent, inverse: ATAN. (line 6)
* TRIM: TRIM. (line 6)
* TTYNAM: TTYNAM. (line 6)
* type cast: TRANSFER. (line 6)
* UBOUND: UBOUND. (line 6)
* UMASK: UMASK. (line 6)
* underflow: Error and Warning Options.
(line 128)
* underscore: Code Gen Options. (line 50)
* UNLINK: UNLINK. (line 6)
* UNPACK: UNPACK. (line 6)
* user id: GETUID. (line 6)
* vector product: DOT_PRODUCT. (line 6)
* VERIFY: VERIFY. (line 6)
* warnings, aliasing: Error and Warning Options.
(line 68)
* warnings, all: Error and Warning Options.
(line 62)
* warnings, ampersand: Error and Warning Options.
(line 85)
* warnings, character truncation: Error and Warning Options.
(line 93)
* warnings, conversion: Error and Warning Options.
(line 96)
* warnings, extra: Error and Warning Options.
(line 135)
* warnings, implicit interface: Error and Warning Options.
(line 99)
* warnings, non-stdandard intrinsics: Error and Warning Options.
(line 105)
* warnings, none: Error and Warning Options.
(line 59)
* warnings, suppressing: Error and Warning Options.
(line 6)
* warnings, suspicious code: Error and Warning Options.
(line 109)
* warnings, tabs: Error and Warning Options.
(line 122)
* warnings, to errors: Error and Warning Options.
(line 132)
* warnings, underflow: Error and Warning Options.
(line 128)
* write character, stream mode <1>: FPUTC. (line 6)
* write character, stream mode: FPUT. (line 6)
* XOR: XOR. (line 6)
* ZABS: ABS. (line 6)
* ZCOS: COS. (line 6)
* ZEXP: EXP. (line 6)
* ZLOG: LOG. (line 6)
* ZSIN: SIN. (line 6)
* ZSQRT: SQRT. (line 6)

Tag Table:
Node: Top2086
Node: Introduction3234
Node: About GNU Fortran3908
Node: GNU Fortran and GCC7966
Node: GNU Fortran and G779631
Node: Project Status10182
Node: Standards12680
Node: Invoking GNU Fortran13337
Node: Option Summary14931
Node: Fortran Dialect Options17346
Node: Error and Warning Options22397
Node: Debugging Options28197
Node: Directory Options29533
Node: Runtime Options30880
Node: Code Gen Options32335
Node: Environment Variables40152
Node: Runtime40755
Node: GFORTRAN_STDIN_UNIT41764
Node: GFORTRAN_STDOUT_UNIT42131
Node: GFORTRAN_STDERR_UNIT42532
Node: GFORTRAN_USE_STDERR42930
Node: GFORTRAN_TMPDIR43375
Node: GFORTRAN_UNBUFFERED_ALL43816
Node: GFORTRAN_SHOW_LOCUS44294
Node: GFORTRAN_OPTIONAL_PLUS44779
Node: GFORTRAN_DEFAULT_RECL45254
Node: GFORTRAN_LIST_SEPARATOR45743
Node: GFORTRAN_CONVERT_UNIT46352
Node: Fortran 2003 status49195
Node: Extensions50285
Node: Old-style kind specifications51492
Node: Old-style variable initialization52326
Node: Extensions to namelist53607
Node: X format descriptor without count field55572
Node: Commas in FORMAT specifications56068
Node: Missing period in FORMAT specifications56554
Node: I/O item lists57085
Node: BOZ literal constants57443
Node: Real array indices58953
Node: Unary operators59219
Node: Implicitly convert LOGICAL and INTEGER values59602
Node: Hollerith constants support60358
Node: Cray pointers62099
Node: CONVERT specifier67478
Node: OpenMP69445
Node: Intrinsic Procedures70095
Node: Introduction to Intrinsics82695
Node: ABORT85008
Node: ABS85725
Node: ACCESS87217
Node: ACHAR89106
Node: ACOS90046
Node: ACOSH90976
Node: ADJUSTL91949
Node: ADJUSTR92843
Node: AIMAG93743
Node: AINT95153
Node: ALARM96598
Node: ALL98232
Node: ALLOCATED100149
Node: AND101018
Node: ANINT102194
Node: ANY103532
Node: ASIN105461
Node: ASINH106406
Node: ASSOCIATED107359
Node: ATAN110184
Node: ATAN2111018
Node: ATANH112297
Node: BESJ0113279
Node: BESJ1114193
Node: BESJN115113
Node: BESY0116138
Node: BESY1116996
Node: BESYN117854
Node: BIT_SIZE118933
Node: BTEST119682
Node: CEILING120525
Node: CHAR121486
Node: CHDIR122573
Node: CHMOD123808
Node: CMPLX125601
Node: COMMAND_ARGUMENT_COUNT127140
Node: COMPLEX128030
Node: CONJG129185
Node: COS130194
Node: COSH131407
Node: COUNT132225
Node: CPU_TIME133759
Node: CSHIFT134683
Node: CTIME136326
Node: DATE_AND_TIME137539
Node: DBLE139902
Node: DCMPLX140742
Node: DFLOAT141981
Node: DIGITS142678
Node: DIM143622
Node: DOT_PRODUCT144758
Node: DPROD146188
Node: DREAL146907
Node: DTIME147571
Node: EOSHIFT149865
Node: EPSILON151926
Node: ERF152622
Node: ERFC153419
Node: ETIME154234
Node: EXIT156412
Node: EXP157271
Node: EXPONENT158368
Node: FDATE159114
Node: FLOAT160288
Node: FGET160998
Node: FGETC162647
Node: FLOOR164251
Node: FLUSH165193
Node: FNUM165845
Node: FPUT166581
Node: FPUTC168018
Node: FRACTION169594
Node: FREE170488
Node: FSEEK171325
Node: FSTAT171818
Node: FTELL172747
Node: GERROR173726
Node: GETARG174434
Node: GET_COMMAND176031
Node: GET_COMMAND_ARGUMENT176911
Node: GETCWD178307
Node: GETENV179111
Node: GET_ENVIRONMENT_VARIABLE180275
Node: GETGID181209
Node: GETLOG181744
Node: GETPID182500
Node: GETUID183228
Node: GMTIME183742
Node: HOSTNM185297
Node: HUGE186235
Node: IACHAR186950
Node: IAND187876
Node: IARGC188864
Node: IBCLR189892
Node: IBITS190553
Node: IBSET191471
Node: ICHAR192127
Node: IDATE193856
Node: IEOR194872
Node: IERRNO195751
Node: INDEX196310
Node: INT197404
Node: INT2198918
Node: INT8199698
Node: IOR200425
Node: IRAND201270
Node: ISATTY202359
Node: ISHFT203153
Node: ISHFTC204135
Node: ITIME205356
Node: KILL206373
Node: KIND207139
Node: LBOUND207977
Node: LEN208957
Node: LEN_TRIM209779
Node: LGE210491
Node: LGT211796
Node: LINK213066
Node: LLE214115
Node: LLT215412
Node: LNBLNK216675
Node: LOC217444
Node: LOG218175
Node: LOG10219377
Node: LOGICAL220243
Node: LONG221070
Node: LSHIFT221841
Node: LSTAT222804
Node: LTIME223830
Node: MALLOC225309
Node: MATMUL226987
Node: MAX228176
Node: MAXEXPONENT229681
Node: MAXLOC230490
Node: MAXVAL232623
Node: MCLOCK234415
Node: MCLOCK8235432
Node: MERGE236660
Node: MIN237421
Node: MINEXPONENT238923
Node: MINLOC239546
Node: MINVAL241679
Node: MOD243445
Node: MODULO244822
Node: MOVE_ALLOC246029
Node: MVBITS247087
Node: NEAREST248271
Node: NEW_LINE249387
Node: NINT250172
Node: NOT251192
Node: NULL251774
Node: OR252658
Node: PACK253815
Node: PERROR255802
Node: PRECISION256392
Node: PRESENT257211
Node: PRODUCT258310
Node: RADIX259837
Node: RAN260607
Node: RAND261077
Node: RANDOM_NUMBER262153
Node: RANDOM_SEED263482
Node: RANGE265358
Node: REAL265978
Node: RENAME267479
Node: REPEAT268512
Node: RESHAPE269237
Node: RRSPACING270699
Node: RSHIFT271385
Node: SCALE272356
Node: SCAN273123
Node: SECNDS274418
Node: SECOND275520
Node: SELECTED_INT_KIND276409
Node: SELECTED_REAL_KIND277565
Node: SET_EXPONENT279504
Node: SHAPE280493
Node: SIGN281599
Node: SIGNAL282675
Node: SIN284186
Node: SINH285227
Node: SIZE285984
Node: SLEEP287040
Node: SNGL287595
Node: SPACING288259
Node: SPREAD289267
Node: SQRT290405
Node: SRAND291589
Node: STAT292762
Node: SUM295742
Node: SYMLNK297213
Node: SYSTEM298359
Node: SYSTEM_CLOCK299321
Node: TAN300658
Node: TANH301439
Node: TIME302251
Node: TIME8303369
Node: TINY304520
Node: TRANSFER305117
Node: TRANSPOSE307142
Node: TRIM307826
Node: TTYNAM308682
Node: UBOUND309617
Node: UMASK310656
Node: UNLINK311244
Node: UNPACK312235
Node: VERIFY313515
Node: XOR314976
Node: Contributing316162
Node: Contributors317017
Node: Projects318487
Node: Proposed Extensions319279
Node: Copying321477
Node: GNU Free Documentation License340686
Node: Funding363098
Node: Option Index365623
Node: Keyword Index372277

End Tag Table