| #!/usr/bin/env python3 |
| # |
| # Copyright 2020 - The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| from acts.controllers.fuchsia_lib.base_lib import BaseLib |
| |
| |
| class RgbValue: |
| # use __dict__ to send in json |
| def __init__(self, r, g, b): |
| self.red = r |
| self.green = g |
| self.blue = b |
| |
| |
| class FuchsiaLightLib(BaseLib): |
| def __init__(self, addr, tc, client_id): |
| self.address = addr |
| self.test_counter = tc |
| self.client_id = client_id |
| |
| def getNumLights(self): |
| """ Gets the total number of physical lights on the Fuchsia device |
| under test. |
| |
| Returns: |
| Integer (number of lights), prints an error message if error. |
| """ |
| test_cmd = "light_facade.GetNumLights" |
| test_args = {} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getNumLightGroups(self): |
| """ Gets the total number of light groups on the Fuchsia device |
| under test. |
| |
| Returns: |
| Integer (number of light groups), prints an error message if error. |
| """ |
| test_cmd = "light_facade.GetNumLightGroups" |
| test_args = {} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getInfo(self, index): |
| """ Gets info (name and capability) for a single light on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| |
| Returns: |
| The Info object, prints an error message if error. |
| """ |
| test_cmd = "light_facade.GetInfo" |
| test_args = {"index": index} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getCurrentSimpleValue(self, index): |
| """ Gets the current simple value for a single light on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| |
| Returns: |
| Boolean. True if the light is ON, False if the light is OFF. |
| If the capability 'SIMPLE' is not supported by this light, fails and prints |
| error message. |
| Use GetInfo to check if light supports this operation. |
| """ |
| test_cmd = "light_facade.GetCurrentSimpleValue" |
| test_args = {"index": index} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def setSimpleValue(self, index, value): |
| """ Sets the simple value for a single light on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| value: boolean, True for ON, False for OFF |
| |
| Returns: |
| None if success, prints error message if error (e.g. capability 'SIMPLE' |
| is not supported by the light). |
| """ |
| test_cmd = "light_facade.SetSimpleValue" |
| test_args = {"index": index, "value": value} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getCurrentBrightnessValue(self, index): |
| """ Gets the current brightness value for a single light on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| |
| Returns: |
| uint8. A value 0-255 inclusive indicating the brightness of the light. |
| If the capability 'BRIGHTNESS' is not supported by this light, fails and prints |
| error message. |
| Use GetInfo to check if light supports this operation. |
| """ |
| test_cmd = "light_facade.GetCurrentBrightnessValue" |
| test_args = {"index": index} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def setBrightnessValue(self, index, value): |
| """ Sets the brightness value for a single light on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| value: uint8, 0-255 inclusive indicating the brightness of the light |
| |
| Returns: |
| None if success, prints error message if error (e.g. capability |
| 'BRIGHTNESS' is not supported by the light). |
| """ |
| test_cmd = "light_facade.SetBrightnessValue" |
| test_args = {"index": index, "value": value} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getCurrentRgbValue(self, index): |
| """ Gets the current RGB value for a single light on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| |
| Returns: |
| The RGB object indicating the RGB value of the light. |
| If the capability 'RGB' is not supported by this light, fails and prints |
| error message. |
| Use GetInfo to check if light supports this operation. |
| """ |
| test_cmd = "light_facade.GetCurrentRgbValue" |
| test_args = {"index": index} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def setRgbValue(self, index, value): |
| """ Sets the RGB value for a single light on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| value: an RGB object |
| |
| Returns: |
| None if success, prints error message if error (e.g. capability 'RGB' |
| is not supported by the light). |
| """ |
| test_cmd = "light_facade.SetRgbValue" |
| test_args = {"index": index, "value": value} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getGroupInfo(self, index): |
| """ Gets group info (name, number of lights, and capability) for a light |
| group on the Fuchsia device under test. |
| |
| Args: |
| index: uint32, index of the light group defined by board, must be less |
| than value returned by getNumLightGroups |
| |
| Returns: |
| The GroupInfo object, prints an error message if error. |
| """ |
| test_cmd = "light_facade.GetGroupInfo" |
| test_args = {"index": index} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getGroupCurrentSimpleValue(self, index): |
| """ Gets the current simple values for the light group on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light group defined by board, must be less than |
| value returned by getNumLightGroups |
| |
| Returns: |
| Vector of booleans, each indicating whether or not the light is on. |
| If the capability 'SIMPLE' is not supported by the light group, fails and prints |
| error message. |
| Use GetGroupInfo to check if light supports this operation. |
| """ |
| test_cmd = "light_facade.GetGroupCurrentSimpleValue" |
| test_args = {"index": index} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def setGroupSimpleValue(self, index, values): |
| """ Sets the simple value for a light group on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| values: a vector of booleans, each has True for ON, False for OFF |
| |
| Returns: |
| None if success, prints error message if error (e.g. capability 'SIMPLE' |
| is not supported by the light group). |
| """ |
| test_cmd = "light_facade.SetGroupSimpleValue" |
| test_args = {"index": index, "values": values} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getGroupCurrentBrightnessValue(self, index): |
| """ Gets the current brightness values for the light group on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light group defined by board, must be less than |
| value returned by getNumLightGroups |
| |
| Returns: |
| Vector of uint8, each indicating the brightness of the light. |
| If the capability 'SIMPLE' is not supported by the light group, fails and prints |
| error message. |
| Use GetGroupInfo to check if light supports this operation. |
| """ |
| test_cmd = "light_facade.GetGroupCurrentBrightnessValue" |
| test_args = {"index": index} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def setGroupBrightnessValue(self, index, values): |
| """ Sets the brightness value for a light group on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| values: a vector of uint8s, each indicating the brightness of a light. |
| |
| Returns: |
| None if success, prints error message if error (e.g. capability 'BRIGHTNESS' |
| is not supported by the light group). |
| """ |
| test_cmd = "light_facade.SetGroupBrightnessValue" |
| test_args = {"index": index, "values": values} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def getGroupCurrentRgbValue(self, index): |
| """ Gets the current RGB values for the light group on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light group defined by board, must be less than |
| value returned by getNumLightGroups |
| |
| Returns: |
| Vector of RGB objects, each indicating the RGB value of the light. |
| If the capability 'RGB' is not supported by the light group, fails and prints |
| error message. |
| Use GetGroupInfo to check if light supports this operation. |
| """ |
| test_cmd = "light_facade.GetGroupCurrentRgbValue" |
| test_args = {"index": index} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
| |
| def setGroupRgbValue(self, index, values): |
| """ Sets the RGB value for a light group on the Fuchsia device |
| under test. |
| |
| Args: |
| index: uint32, index of the light defined by board, must be less than |
| value returned by getNumLights |
| values: a vector of RGB objects, each indicating the RGB value of a light. |
| |
| Returns: |
| None if success, prints error message if error (e.g. capability 'RGB' |
| is not supported by the light group). |
| """ |
| test_cmd = "light_facade.SetGroupRgbValue" |
| test_args = {"index": index, "values": values} |
| test_id = self.build_id(self.test_counter) |
| self.test_counter += 1 |
| |
| return self.send_command(test_id, test_cmd, test_args) |
