| /************************************************************************** |
| * |
| * Copyright 2009 Marek Olšák <maraeo@gmail.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| **************************************************************************/ |
| |
| #ifndef U_BLITTER_H |
| #define U_BLITTER_H |
| |
| #include "util/u_framebuffer.h" |
| #include "util/u_inlines.h" |
| #include "util/u_memory.h" |
| |
| #include "pipe/p_state.h" |
| |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| struct pipe_context; |
| |
| enum blitter_attrib_type { |
| UTIL_BLITTER_ATTRIB_NONE, |
| UTIL_BLITTER_ATTRIB_COLOR, |
| UTIL_BLITTER_ATTRIB_TEXCOORD |
| }; |
| |
| struct blitter_context |
| { |
| /** |
| * Draw a rectangle. |
| * |
| * \param x1 An X coordinate of the top-left corner. |
| * \param y1 A Y coordinate of the top-left corner. |
| * \param x2 An X coordinate of the bottom-right corner. |
| * \param y2 A Y coordinate of the bottom-right corner. |
| * \param depth A depth which the rectangle is rendered at. |
| * |
| * \param type Semantics of the attributes "attrib". |
| * If type is UTIL_BLITTER_ATTRIB_NONE, ignore them. |
| * If type is UTIL_BLITTER_ATTRIB_COLOR, the attributes |
| * make up a constant RGBA color, and should go |
| * to the GENERIC0 varying slot of a fragment shader. |
| * If type is UTIL_BLITTER_ATTRIB_TEXCOORD, {a1, a2} and |
| * {a3, a4} specify top-left and bottom-right texture |
| * coordinates of the rectangle, respectively, and should go |
| * to the GENERIC0 varying slot of a fragment shader. |
| * |
| * \param attrib See type. |
| * |
| * \note A driver may optionally override this callback to implement |
| * a specialized hardware path for drawing a rectangle, e.g. using |
| * a rectangular point sprite. |
| */ |
| void (*draw_rectangle)(struct blitter_context *blitter, |
| unsigned x1, unsigned y1, unsigned x2, unsigned y2, |
| float depth, |
| enum blitter_attrib_type type, |
| const union pipe_color_union *color); |
| |
| /* Whether the blitter is running. */ |
| boolean running; |
| |
| /* Private members, really. */ |
| struct pipe_context *pipe; /**< pipe context */ |
| |
| void *saved_blend_state; /**< blend state */ |
| void *saved_dsa_state; /**< depth stencil alpha state */ |
| void *saved_velem_state; /**< vertex elements state */ |
| void *saved_rs_state; /**< rasterizer state */ |
| void *saved_fs, *saved_vs, *saved_gs; /**< shaders */ |
| |
| struct pipe_framebuffer_state saved_fb_state; /**< framebuffer state */ |
| struct pipe_stencil_ref saved_stencil_ref; /**< stencil ref */ |
| struct pipe_viewport_state saved_viewport; |
| boolean is_sample_mask_saved; |
| unsigned saved_sample_mask; |
| |
| int saved_num_sampler_states; |
| void *saved_sampler_states[PIPE_MAX_SAMPLERS]; |
| |
| int saved_num_sampler_views; |
| struct pipe_sampler_view *saved_sampler_views[PIPE_MAX_SAMPLERS]; |
| |
| int saved_num_vertex_buffers; |
| struct pipe_vertex_buffer saved_vertex_buffers[PIPE_MAX_ATTRIBS]; |
| |
| int saved_num_so_targets; |
| struct pipe_stream_output_target *saved_so_targets[PIPE_MAX_SO_BUFFERS]; |
| }; |
| |
| /** |
| * Create a blitter context. |
| */ |
| struct blitter_context *util_blitter_create(struct pipe_context *pipe); |
| |
| /** |
| * Destroy a blitter context. |
| */ |
| void util_blitter_destroy(struct blitter_context *blitter); |
| |
| /** |
| * Return the pipe context associated with a blitter context. |
| */ |
| static INLINE |
| struct pipe_context *util_blitter_get_pipe(struct blitter_context *blitter) |
| { |
| return blitter->pipe; |
| } |
| |
| /* The default function to draw a rectangle. This can only be used |
| * inside of the draw_rectangle callback if the driver overrides it. */ |
| void util_blitter_draw_rectangle(struct blitter_context *blitter, |
| unsigned x1, unsigned y1, |
| unsigned x2, unsigned y2, |
| float depth, |
| enum blitter_attrib_type type, |
| const union pipe_color_union *attrib); |
| |
| /* |
| * These states must be saved before any of the following functions are called: |
| * - vertex buffers |
| * - vertex elements |
| * - vertex shader |
| * - geometry shader (if supported) |
| * - stream output targets (if supported) |
| * - rasterizer state |
| */ |
| |
| /** |
| * Clear a specified set of currently bound buffers to specified values. |
| * |
| * These states must be saved in the blitter in addition to the state objects |
| * already required to be saved: |
| * - fragment shader |
| * - depth stencil alpha state |
| * - blend state |
| */ |
| void util_blitter_clear(struct blitter_context *blitter, |
| unsigned width, unsigned height, |
| unsigned num_cbufs, |
| unsigned clear_buffers, |
| enum pipe_format cbuf_format, |
| const union pipe_color_union *color, |
| double depth, unsigned stencil); |
| |
| /** |
| * Check if the blitter (with the help of the driver) can blit between |
| * the two resources. |
| * The mask is a combination of the PIPE_MASK_* flags. |
| * Set to PIPE_MASK_RGBAZS if unsure. |
| */ |
| boolean util_blitter_is_copy_supported(struct blitter_context *blitter, |
| const struct pipe_resource *dst, |
| const struct pipe_resource *src, |
| unsigned mask); |
| /** |
| * Copy a block of pixels from one surface to another. |
| * |
| * You can copy from any color format to any other color format provided |
| * the former can be sampled from and the latter can be rendered to. Otherwise, |
| * a software fallback path is taken and both surfaces must be of the same |
| * format. |
| * |
| * Only one sample of a multisample texture can be copied and is specified by |
| * src_sample. If the destination is a multisample resource, dst_sample_mask |
| * specifies the sample mask. For single-sample resources, set dst_sample_mask |
| * to ~0. |
| * |
| * These states must be saved in the blitter in addition to the state objects |
| * already required to be saved: |
| * - fragment shader |
| * - depth stencil alpha state |
| * - blend state |
| * - fragment sampler states |
| * - fragment sampler textures |
| * - framebuffer state |
| */ |
| void util_blitter_copy_texture(struct blitter_context *blitter, |
| struct pipe_resource *dst, |
| unsigned dst_level, unsigned dst_sample_mask, |
| unsigned dstx, unsigned dsty, unsigned dstz, |
| struct pipe_resource *src, |
| unsigned src_level, unsigned src_sample, |
| const struct pipe_box *srcbox); |
| |
| /** |
| * Same as util_blitter_copy_texture, but dst and src are pipe_surface and |
| * pipe_sampler_view, respectively. The mipmap level and dstz are part of |
| * the views. |
| * |
| * Drivers can use this to change resource properties (like format, width, |
| * height) by changing how the views interpret them, instead of changing |
| * pipe_resource directly. This is usually needed to accelerate copying of |
| * compressed formats. |
| * |
| * src_width0 and src_height0 are sampler_view-private properties that |
| * override pipe_resource. The blitter uses them for computation of texture |
| * coordinates. The dst dimensions are supplied through pipe_surface::width |
| * and height. |
| * |
| * The mask is a combination of the PIPE_MASK_* flags. |
| * Set to PIPE_MASK_RGBAZS if unsure. |
| * |
| * NOTE: There are no checks whether the blit is actually supported. |
| */ |
| void util_blitter_copy_texture_view(struct blitter_context *blitter, |
| struct pipe_surface *dst, |
| unsigned dst_sample_mask, |
| unsigned dstx, unsigned dsty, |
| struct pipe_sampler_view *src, |
| unsigned src_sample, |
| const struct pipe_box *srcbox, |
| unsigned src_width0, unsigned src_height0, |
| unsigned mask); |
| |
| /** |
| * Helper function to initialize a view for copy_texture_view. |
| * The parameters must match copy_texture_view. |
| */ |
| void util_blitter_default_dst_texture(struct pipe_surface *dst_templ, |
| struct pipe_resource *dst, |
| unsigned dstlevel, |
| unsigned dstz, |
| const struct pipe_box *srcbox); |
| |
| /** |
| * Helper function to initialize a view for copy_texture_view. |
| * The parameters must match copy_texture_view. |
| */ |
| void util_blitter_default_src_texture(struct pipe_sampler_view *src_templ, |
| struct pipe_resource *src, |
| unsigned srclevel); |
| |
| /** |
| * Copy data from one buffer to another using the Stream Output functionality. |
| * Some alignment is required, otherwise software fallback is used. |
| */ |
| void util_blitter_copy_buffer(struct blitter_context *blitter, |
| struct pipe_resource *dst, |
| unsigned dstx, |
| struct pipe_resource *src, |
| unsigned srcx, |
| unsigned size); |
| |
| /** |
| * Clear a region of a (color) surface to a constant value. |
| * |
| * These states must be saved in the blitter in addition to the state objects |
| * already required to be saved: |
| * - fragment shader |
| * - depth stencil alpha state |
| * - blend state |
| * - framebuffer state |
| */ |
| void util_blitter_clear_render_target(struct blitter_context *blitter, |
| struct pipe_surface *dst, |
| const union pipe_color_union *color, |
| unsigned dstx, unsigned dsty, |
| unsigned width, unsigned height); |
| |
| /** |
| * Clear a region of a depth-stencil surface, both stencil and depth |
| * or only one of them if this is a combined depth-stencil surface. |
| * |
| * These states must be saved in the blitter in addition to the state objects |
| * already required to be saved: |
| * - fragment shader |
| * - depth stencil alpha state |
| * - blend state |
| * - framebuffer state |
| */ |
| void util_blitter_clear_depth_stencil(struct blitter_context *blitter, |
| struct pipe_surface *dst, |
| unsigned clear_flags, |
| double depth, |
| unsigned stencil, |
| unsigned dstx, unsigned dsty, |
| unsigned width, unsigned height); |
| |
| /* The following functions are customized variants of the clear functions. |
| * Some drivers use them internally to do things like MSAA resolve |
| * and resource decompression. It usually consists of rendering a full-screen |
| * quad with a special blend or DSA state. |
| */ |
| |
| /* Used by r300g for depth decompression. */ |
| void util_blitter_custom_clear_depth(struct blitter_context *blitter, |
| unsigned width, unsigned height, |
| double depth, void *custom_dsa); |
| |
| /* Used by r600g for depth decompression. */ |
| void util_blitter_custom_depth_stencil(struct blitter_context *blitter, |
| struct pipe_surface *zsurf, |
| struct pipe_surface *cbsurf, |
| unsigned sample_mask, |
| void *dsa_stage, float depth); |
| |
| /* Used by r600g for color decompression. */ |
| void util_blitter_custom_color(struct blitter_context *blitter, |
| struct pipe_surface *dstsurf, |
| void *custom_blend); |
| |
| /* Used by r600g for MSAA color resolve. */ |
| void util_blitter_custom_resolve_color(struct blitter_context *blitter, |
| struct pipe_resource *dst, |
| unsigned dst_level, |
| unsigned dst_layer, |
| struct pipe_resource *src, |
| unsigned src_layer, |
| unsigned sampled_mask, |
| void *custom_blend); |
| |
| /* The functions below should be used to save currently bound constant state |
| * objects inside a driver. The objects are automatically restored at the end |
| * of the util_blitter_{clear, copy_region, fill_region} functions and then |
| * forgotten. |
| * |
| * States not listed here are not affected by util_blitter. */ |
| |
| static INLINE |
| void util_blitter_save_blend(struct blitter_context *blitter, |
| void *state) |
| { |
| blitter->saved_blend_state = state; |
| } |
| |
| static INLINE |
| void util_blitter_save_depth_stencil_alpha(struct blitter_context *blitter, |
| void *state) |
| { |
| blitter->saved_dsa_state = state; |
| } |
| |
| static INLINE |
| void util_blitter_save_vertex_elements(struct blitter_context *blitter, |
| void *state) |
| { |
| blitter->saved_velem_state = state; |
| } |
| |
| static INLINE |
| void util_blitter_save_stencil_ref(struct blitter_context *blitter, |
| const struct pipe_stencil_ref *state) |
| { |
| blitter->saved_stencil_ref = *state; |
| } |
| |
| static INLINE |
| void util_blitter_save_rasterizer(struct blitter_context *blitter, |
| void *state) |
| { |
| blitter->saved_rs_state = state; |
| } |
| |
| static INLINE |
| void util_blitter_save_fragment_shader(struct blitter_context *blitter, |
| void *fs) |
| { |
| blitter->saved_fs = fs; |
| } |
| |
| static INLINE |
| void util_blitter_save_vertex_shader(struct blitter_context *blitter, |
| void *vs) |
| { |
| blitter->saved_vs = vs; |
| } |
| |
| static INLINE |
| void util_blitter_save_geometry_shader(struct blitter_context *blitter, |
| void *gs) |
| { |
| blitter->saved_gs = gs; |
| } |
| |
| static INLINE |
| void util_blitter_save_framebuffer(struct blitter_context *blitter, |
| const struct pipe_framebuffer_state *state) |
| { |
| blitter->saved_fb_state.nr_cbufs = 0; /* It's ~0 now, meaning it's unsaved. */ |
| util_copy_framebuffer_state(&blitter->saved_fb_state, state); |
| } |
| |
| static INLINE |
| void util_blitter_save_viewport(struct blitter_context *blitter, |
| struct pipe_viewport_state *state) |
| { |
| blitter->saved_viewport = *state; |
| } |
| |
| static INLINE |
| void util_blitter_save_fragment_sampler_states( |
| struct blitter_context *blitter, |
| int num_sampler_states, |
| void **sampler_states) |
| { |
| assert(num_sampler_states <= Elements(blitter->saved_sampler_states)); |
| |
| blitter->saved_num_sampler_states = num_sampler_states; |
| memcpy(blitter->saved_sampler_states, sampler_states, |
| num_sampler_states * sizeof(void *)); |
| } |
| |
| static INLINE void |
| util_blitter_save_fragment_sampler_views(struct blitter_context *blitter, |
| int num_views, |
| struct pipe_sampler_view **views) |
| { |
| unsigned i; |
| assert(num_views <= Elements(blitter->saved_sampler_views)); |
| |
| blitter->saved_num_sampler_views = num_views; |
| for (i = 0; i < num_views; i++) |
| pipe_sampler_view_reference(&blitter->saved_sampler_views[i], |
| views[i]); |
| } |
| |
| static INLINE void |
| util_blitter_save_vertex_buffers(struct blitter_context *blitter, |
| int num_vertex_buffers, |
| struct pipe_vertex_buffer *vertex_buffers) |
| { |
| assert(num_vertex_buffers <= Elements(blitter->saved_vertex_buffers)); |
| |
| blitter->saved_num_vertex_buffers = 0; |
| util_copy_vertex_buffers(blitter->saved_vertex_buffers, |
| (unsigned*)&blitter->saved_num_vertex_buffers, |
| vertex_buffers, |
| num_vertex_buffers); |
| } |
| |
| static INLINE void |
| util_blitter_save_so_targets(struct blitter_context *blitter, |
| int num_targets, |
| struct pipe_stream_output_target **targets) |
| { |
| unsigned i; |
| assert(num_targets <= Elements(blitter->saved_so_targets)); |
| |
| blitter->saved_num_so_targets = num_targets; |
| for (i = 0; i < num_targets; i++) |
| pipe_so_target_reference(&blitter->saved_so_targets[i], |
| targets[i]); |
| } |
| |
| static INLINE void |
| util_blitter_save_sample_mask(struct blitter_context *blitter, |
| unsigned sample_mask) |
| { |
| blitter->is_sample_mask_saved = TRUE; |
| blitter->saved_sample_mask = sample_mask; |
| } |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |