blob: 62c6b6b10f5ef536ed6196cadd4ace8e191052b2 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* Filename: bte_main.c
*
* Description: Contains BTE core stack initialization and shutdown code
*
******************************************************************************/
#include <fcntl.h>
#include <stdlib.h>
#include <assert.h>
#include <signal.h>
#include <time.h>
#include <hardware/bluetooth.h>
#include "gki.h"
#include "bd.h"
#include "btu.h"
#include "bte.h"
#include "bta_api.h"
#include "bt_hci_lib.h"
/*******************************************************************************
** Constants & Macros
*******************************************************************************/
/* Run-time configuration file */
#ifndef BTE_STACK_CONF_FILE
#define BTE_STACK_CONF_FILE "/etc/bluetooth/bt_stack.conf"
#endif
/* if not specified in .txt file then use this as default */
#ifndef HCI_LOGGING_FILENAME
#define HCI_LOGGING_FILENAME "/data/misc/bluedroid/btsnoop_hci.log"
#endif
/* Stack preload process timeout period */
#ifndef PRELOAD_START_TIMEOUT_MS
#define PRELOAD_START_TIMEOUT_MS 3000 // 3 seconds
#endif
/* Stack preload process maximum retry attempts */
#ifndef PRELOAD_MAX_RETRY_ATTEMPTS
#define PRELOAD_MAX_RETRY_ATTEMPTS 0
#endif
/*******************************************************************************
** Local type definitions
*******************************************************************************/
/* Preload retry control block */
typedef struct
{
int retry_counts;
BOOLEAN timer_created;
timer_t timer_id;
} bt_preload_retry_cb_t;
/******************************************************************************
** Variables
******************************************************************************/
BOOLEAN hci_logging_enabled = FALSE; /* by default, turn hci log off */
BOOLEAN hci_logging_config = FALSE; /* configured from bluetooth framework */
char hci_logfile[256] = HCI_LOGGING_FILENAME;
/*******************************************************************************
** Static variables
*******************************************************************************/
static bt_hc_interface_t *bt_hc_if=NULL;
static const bt_hc_callbacks_t hc_callbacks;
static BOOLEAN lpm_enabled = FALSE;
static bt_preload_retry_cb_t preload_retry_cb;
/*******************************************************************************
** Static functions
*******************************************************************************/
static void bte_main_in_hw_init(void);
static void bte_hci_enable(void);
static void bte_hci_disable(void);
static void preload_start_wait_timer(void);
static void preload_stop_wait_timer(void);
/*******************************************************************************
** Externs
*******************************************************************************/
BTU_API extern UINT32 btu_task (UINT32 param);
BTU_API extern void BTE_Init (void);
BT_API extern void BTE_LoadStack(void);
BT_API void BTE_UnloadStack(void);
extern void scru_flip_bda (BD_ADDR dst, const BD_ADDR src);
extern void bte_load_conf(const char *p_path);
extern bt_bdaddr_t btif_local_bd_addr;
/*******************************************************************************
** System Task Configuration
*******************************************************************************/
/* bluetooth protocol stack (BTU) task */
#ifndef BTE_BTU_STACK_SIZE
#define BTE_BTU_STACK_SIZE 0//0x2000 /* In bytes */
#endif
#define BTE_BTU_TASK_STR ((INT8 *) "BTU")
UINT32 bte_btu_stack[(BTE_BTU_STACK_SIZE + 3) / 4];
/******************************************************************************
**
** Function bte_main_in_hw_init
**
** Description Internal helper function for chip hardware init
**
** Returns None
**
******************************************************************************/
static void bte_main_in_hw_init(void)
{
if ( (bt_hc_if = (bt_hc_interface_t *) bt_hc_get_interface()) \
== NULL)
{
APPL_TRACE_ERROR0("!!! Failed to get BtHostControllerInterface !!!");
}
memset(&preload_retry_cb, 0, sizeof(bt_preload_retry_cb_t));
}
/******************************************************************************
**
** Function bte_main_boot_entry
**
** Description BTE MAIN API - Entry point for BTE chip/stack initialization
**
** Returns None
**
******************************************************************************/
void bte_main_boot_entry(void)
{
/* initialize OS */
GKI_init();
bte_main_in_hw_init();
bte_load_conf(BTE_STACK_CONF_FILE);
#if (BTTRC_INCLUDED == TRUE)
/* Initialize trace feature */
BTTRC_TraceInit(MAX_TRACE_RAM_SIZE, &BTE_TraceLogBuf[0], BTTRC_METHOD_RAM);
#endif
}
/******************************************************************************
**
** Function bte_main_shutdown
**
** Description BTE MAIN API - Shutdown code for BTE chip/stack
**
** Returns None
**
******************************************************************************/
void bte_main_shutdown()
{
GKI_shutdown();
}
/******************************************************************************
**
** Function bte_main_enable
**
** Description BTE MAIN API - Creates all the BTE tasks. Should be called
** part of the Bluetooth stack enable sequence
**
** Returns None
**
******************************************************************************/
void bte_main_enable()
{
APPL_TRACE_DEBUG1("%s", __FUNCTION__);
/* Initialize BTE control block */
BTE_Init();
lpm_enabled = FALSE;
bte_hci_enable();
GKI_create_task((TASKPTR)btu_task, BTU_TASK, BTE_BTU_TASK_STR,
(UINT16 *) ((UINT8 *)bte_btu_stack + BTE_BTU_STACK_SIZE),
sizeof(bte_btu_stack));
GKI_run(0);
}
/******************************************************************************
**
** Function bte_main_disable
**
** Description BTE MAIN API - Destroys all the BTE tasks. Should be called
** part of the Bluetooth stack disable sequence
**
** Returns None
**
******************************************************************************/
void bte_main_disable(void)
{
APPL_TRACE_DEBUG1("%s", __FUNCTION__);
preload_stop_wait_timer();
bte_hci_disable();
GKI_destroy_task(BTU_TASK);
GKI_freeze();
}
/******************************************************************************
**
** Function bte_main_config_hci_logging
**
** Description enable or disable HIC snoop logging
**
** Returns None
**
******************************************************************************/
void bte_main_config_hci_logging(BOOLEAN enable, BOOLEAN bt_disabled)
{
int old = (hci_logging_enabled == TRUE) || (hci_logging_config == TRUE);
int new;
if (enable) {
hci_logging_config = TRUE;
} else {
hci_logging_config = FALSE;
}
new = (hci_logging_enabled == TRUE) || (hci_logging_config == TRUE);
if ((old == new) || bt_disabled || (bt_hc_if == NULL)) {
return;
}
bt_hc_if->logging(new ? BT_HC_LOGGING_ON : BT_HC_LOGGING_OFF, hci_logfile);
}
/******************************************************************************
**
** Function bte_hci_enable
**
** Description Enable HCI & Vendor modules
**
** Returns None
**
******************************************************************************/
static void bte_hci_enable(void)
{
APPL_TRACE_DEBUG1("%s", __FUNCTION__);
preload_start_wait_timer();
if (bt_hc_if)
{
int result = bt_hc_if->init(&hc_callbacks, btif_local_bd_addr.address);
APPL_TRACE_EVENT1("libbt-hci init returns %d", result);
assert(result == BT_HC_STATUS_SUCCESS);
if (hci_logging_enabled == TRUE || hci_logging_config == TRUE)
bt_hc_if->logging(BT_HC_LOGGING_ON, hci_logfile);
#if (defined (BT_CLEAN_TURN_ON_DISABLED) && BT_CLEAN_TURN_ON_DISABLED == TRUE)
APPL_TRACE_DEBUG1("%s Not Turninig Off the BT before Turninig ON", __FUNCTION__);
/* Do not power off the chip before powering on if BT_CLEAN_TURN_ON_DISABLED flag
is defined and set to TRUE to avoid below mentioned issue.
Wingray kernel driver maintains a combined counter to keep track of
BT-Wifi state. Invoking set_power(BT_HC_CHIP_PWR_OFF) when the BT is already
in OFF state causes this counter to be incorrectly decremented and results in undesired
behavior of the chip.
This is only a workaround and when the issue is fixed in the kernel this work around
should be removed. */
#else
/* toggle chip power to ensure we will reset chip in case
a previous stack shutdown wasn't completed gracefully */
bt_hc_if->set_power(BT_HC_CHIP_PWR_OFF);
#endif
bt_hc_if->set_power(BT_HC_CHIP_PWR_ON);
bt_hc_if->preload(NULL);
}
}
/******************************************************************************
**
** Function bte_hci_disable
**
** Description Disable HCI & Vendor modules
**
** Returns None
**
******************************************************************************/
static void bte_hci_disable(void)
{
APPL_TRACE_DEBUG1("%s", __FUNCTION__);
if (bt_hc_if)
{
bt_hc_if->cleanup();
bt_hc_if->set_power(BT_HC_CHIP_PWR_OFF);
if (hci_logging_enabled == TRUE || hci_logging_config == TRUE)
bt_hc_if->logging(BT_HC_LOGGING_OFF, hci_logfile);
}
}
/*******************************************************************************
**
** Function preload_wait_timeout
**
** Description Timeout thread of preload watchdog timer
**
** Returns None
**
*******************************************************************************/
static void preload_wait_timeout(union sigval arg)
{
APPL_TRACE_ERROR2("...preload_wait_timeout (retried:%d/max-retry:%d)...",
preload_retry_cb.retry_counts,
PRELOAD_MAX_RETRY_ATTEMPTS);
if (preload_retry_cb.retry_counts++ < PRELOAD_MAX_RETRY_ATTEMPTS)
{
bte_hci_disable();
GKI_delay(100);
bte_hci_enable();
}
else
{
/* Notify BTIF_TASK that the init procedure had failed*/
GKI_send_event(BTIF_TASK, BT_EVT_HARDWARE_INIT_FAIL);
}
}
/*******************************************************************************
**
** Function preload_start_wait_timer
**
** Description Launch startup watchdog timer
**
** Returns None
**
*******************************************************************************/
static void preload_start_wait_timer(void)
{
int status;
struct itimerspec ts;
struct sigevent se;
UINT32 timeout_ms = PRELOAD_START_TIMEOUT_MS;
if (preload_retry_cb.timer_created == FALSE)
{
se.sigev_notify = SIGEV_THREAD;
se.sigev_value.sival_ptr = &preload_retry_cb.timer_id;
se.sigev_notify_function = preload_wait_timeout;
se.sigev_notify_attributes = NULL;
status = timer_create(CLOCK_MONOTONIC, &se, &preload_retry_cb.timer_id);
if (status == 0)
preload_retry_cb.timer_created = TRUE;
}
if (preload_retry_cb.timer_created == TRUE)
{
ts.it_value.tv_sec = timeout_ms/1000;
ts.it_value.tv_nsec = 1000000*(timeout_ms%1000);
ts.it_interval.tv_sec = 0;
ts.it_interval.tv_nsec = 0;
status = timer_settime(preload_retry_cb.timer_id, 0, &ts, 0);
if (status == -1)
APPL_TRACE_ERROR0("Failed to fire preload watchdog timer");
}
}
/*******************************************************************************
**
** Function preload_stop_wait_timer
**
** Description Stop preload watchdog timer
**
** Returns None
**
*******************************************************************************/
static void preload_stop_wait_timer(void)
{
if (preload_retry_cb.timer_created == TRUE)
{
timer_delete(preload_retry_cb.timer_id);
preload_retry_cb.timer_created = FALSE;
}
}
/******************************************************************************
**
** Function bte_main_postload_cfg
**
** Description BTE MAIN API - Stack postload configuration
**
** Returns None
**
******************************************************************************/
void bte_main_postload_cfg(void)
{
if (bt_hc_if)
bt_hc_if->postload(NULL);
}
#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
/******************************************************************************
**
** Function bte_main_enable_lpm
**
** Description BTE MAIN API - Enable/Disable low power mode operation
**
** Returns None
**
******************************************************************************/
void bte_main_enable_lpm(BOOLEAN enable)
{
int result = -1;
if (bt_hc_if)
result = bt_hc_if->lpm( \
(enable == TRUE) ? BT_HC_LPM_ENABLE : BT_HC_LPM_DISABLE \
);
APPL_TRACE_EVENT2("HC lib lpm enable=%d return %d", enable, result);
}
/******************************************************************************
**
** Function bte_main_lpm_allow_bt_device_sleep
**
** Description BTE MAIN API - Allow BT controller goest to sleep
**
** Returns None
**
******************************************************************************/
void bte_main_lpm_allow_bt_device_sleep()
{
int result = -1;
if ((bt_hc_if) && (lpm_enabled == TRUE))
result = bt_hc_if->lpm(BT_HC_LPM_WAKE_DEASSERT);
APPL_TRACE_DEBUG1("HC lib lpm deassertion return %d", result);
}
/******************************************************************************
**
** Function bte_main_lpm_wake_bt_device
**
** Description BTE MAIN API - Wake BT controller up if it is in sleep mode
**
** Returns None
**
******************************************************************************/
void bte_main_lpm_wake_bt_device()
{
int result = -1;
if ((bt_hc_if) && (lpm_enabled == TRUE))
result = bt_hc_if->lpm(BT_HC_LPM_WAKE_ASSERT);
APPL_TRACE_DEBUG1("HC lib lpm assertion return %d", result);
}
#endif // HCILP_INCLUDED
/******************************************************************************
**
** Function bte_main_hci_send
**
** Description BTE MAIN API - This function is called by the upper stack to
** send an HCI message. The function displays a protocol trace
** message (if enabled), and then calls the 'transmit' function
** associated with the currently selected HCI transport
**
** Returns None
**
******************************************************************************/
void bte_main_hci_send (BT_HDR *p_msg, UINT16 event)
{
UINT16 sub_event = event & BT_SUB_EVT_MASK; /* local controller ID */
p_msg->event = event;
if((sub_event == LOCAL_BR_EDR_CONTROLLER_ID) || \
(sub_event == LOCAL_BLE_CONTROLLER_ID))
{
if (bt_hc_if)
bt_hc_if->transmit_buf((TRANSAC)p_msg, \
(char *) (p_msg + 1), \
p_msg->len);
else
GKI_freebuf(p_msg);
}
else
{
APPL_TRACE_ERROR0("Invalid Controller ID. Discarding message.");
GKI_freebuf(p_msg);
}
}
/******************************************************************************
**
** Function bte_main_post_reset_init
**
** Description BTE MAIN API - This function is mapped to BTM_APP_DEV_INIT
** and shall be automatically called from BTE after HCI_Reset
**
** Returns None
**
******************************************************************************/
void bte_main_post_reset_init()
{
BTM_ContinueReset();
}
/*****************************************************************************
**
** libbt-hci Callback Functions
**
*****************************************************************************/
/******************************************************************************
**
** Function preload_cb
**
** Description HOST/CONTROLLER LIB CALLBACK API - This function is called
** when the libbt-hci completed stack preload process
**
** Returns None
**
******************************************************************************/
static void preload_cb(TRANSAC transac, bt_hc_preload_result_t result)
{
APPL_TRACE_EVENT1("HC preload_cb %d [0:SUCCESS 1:FAIL]", result);
if (result == BT_HC_PRELOAD_SUCCESS)
{
preload_stop_wait_timer();
/* notify BTU task that libbt-hci is ready */
GKI_send_event(BTU_TASK, BT_EVT_PRELOAD_CMPL);
}
}
/******************************************************************************
**
** Function postload_cb
**
** Description HOST/CONTROLLER LIB CALLBACK API - This function is called
** when the libbt-hci lib completed stack postload process
**
** Returns None
**
******************************************************************************/
static void postload_cb(TRANSAC transac, bt_hc_postload_result_t result)
{
APPL_TRACE_EVENT1("HC postload_cb %d", result);
}
/******************************************************************************
**
** Function lpm_cb
**
** Description HOST/CONTROLLER LIB CALLBACK API - This function is called
** back from the libbt-hci to indicate the current LPM state
**
** Returns None
**
******************************************************************************/
static void lpm_cb(bt_hc_lpm_request_result_t result)
{
APPL_TRACE_EVENT1("HC lpm_result_cb %d", result);
lpm_enabled = (result == BT_HC_LPM_ENABLED) ? TRUE : FALSE;
}
/******************************************************************************
**
** Function hostwake_ind
**
** Description HOST/CONTROLLER LIB CALLOUT API - This function is called
** from the libbt-hci to indicate the HostWake event
**
** Returns None
**
******************************************************************************/
static void hostwake_ind(bt_hc_low_power_event_t event)
{
APPL_TRACE_EVENT1("HC hostwake_ind %d", event);
}
/******************************************************************************
**
** Function alloc
**
** Description HOST/CONTROLLER LIB CALLOUT API - This function is called
** from the libbt-hci to request for data buffer allocation
**
** Returns NULL / pointer to allocated buffer
**
******************************************************************************/
static char *alloc(int size)
{
BT_HDR *p_hdr = NULL;
/*
APPL_TRACE_DEBUG1("HC alloc size=%d", size);
*/
p_hdr = (BT_HDR *) GKI_getbuf ((UINT16) size);
if (p_hdr == NULL)
{
APPL_TRACE_WARNING0("alloc returns NO BUFFER!");
}
return ((char *) p_hdr);
}
/******************************************************************************
**
** Function dealloc
**
** Description HOST/CONTROLLER LIB CALLOUT API - This function is called
** from the libbt-hci to release the data buffer allocated
** through the alloc call earlier
**
** Bluedroid libbt-hci library uses 'transac' parameter to
** pass data-path buffer/packet across bt_hci_lib interface
** boundary. The 'p_buf' is not intended to be used here
** but might point to data portion of data-path buffer.
**
** Returns bt_hc_status_t
**
******************************************************************************/
static int dealloc(TRANSAC transac, char *p_buf)
{
GKI_freebuf(transac);
return BT_HC_STATUS_SUCCESS;
}
/******************************************************************************
**
** Function data_ind
**
** Description HOST/CONTROLLER LIB CALLOUT API - This function is called
** from the libbt-hci to pass in the received HCI packets
**
** The core stack is responsible for releasing the data buffer
** passed in from the libbt-hci once the core stack has done
** with it.
**
** Bluedroid libbt-hci library uses 'transac' parameter to
** pass data-path buffer/packet across bt_hci_lib interface
** boundary. The 'p_buf' and 'len' parameters are not intended
** to be used here but might point to data portion in data-
** path buffer and length of valid data respectively.
**
** Returns bt_hc_status_t
**
******************************************************************************/
static int data_ind(TRANSAC transac, char *p_buf, int len)
{
BT_HDR *p_msg = (BT_HDR *) transac;
/*
APPL_TRACE_DEBUG2("HC data_ind event=0x%04X (len=%d)", p_msg->event, len);
*/
GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, transac);
return BT_HC_STATUS_SUCCESS;
}
/******************************************************************************
**
** Function tx_result
**
** Description HOST/CONTROLLER LIB CALLBACK API - This function is called
** from the libbt-hci once it has processed/sent the prior data
** buffer which core stack passed to it through transmit_buf
** call earlier.
**
** The core stack is responsible for releasing the data buffer
** if it has been completedly processed.
**
** Bluedroid libbt-hci library uses 'transac' parameter to
** pass data-path buffer/packet across bt_hci_lib interface
** boundary. The 'p_buf' is not intended to be used here
** but might point to data portion in data-path buffer.
**
** Returns bt_hc_status_t
**
******************************************************************************/
static int tx_result(TRANSAC transac, char *p_buf, \
bt_hc_transmit_result_t result)
{
/*
APPL_TRACE_DEBUG2("HC tx_result %d (event=%04X)", result, \
((BT_HDR *)transac)->event);
*/
if (result == BT_HC_TX_FRAGMENT)
{
GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, transac);
}
else
{
GKI_freebuf(transac);
}
return BT_HC_STATUS_SUCCESS;
}
/*****************************************************************************
** The libbt-hci Callback Functions Table
*****************************************************************************/
static const bt_hc_callbacks_t hc_callbacks = {
sizeof(bt_hc_callbacks_t),
preload_cb,
postload_cb,
lpm_cb,
hostwake_ind,
alloc,
dealloc,
data_ind,
tx_result
};