Arduino 0022
The Arduino 0022 hardware and libraries directory from the
full source drop. It's unchanged from the original.
Signed-off-by: Mike J. Chen <mjchen@google.com>
diff --git a/hardware/arduino/boards.txt b/hardware/arduino/boards.txt
new file mode 100644
index 0000000..0ae40d3
--- /dev/null
+++ b/hardware/arduino/boards.txt
@@ -0,0 +1,338 @@
+##############################################################
+
+uno.name=Arduino Uno
+uno.upload.protocol=stk500
+uno.upload.maximum_size=32256
+uno.upload.speed=115200
+uno.bootloader.low_fuses=0xff
+uno.bootloader.high_fuses=0xde
+uno.bootloader.extended_fuses=0x05
+uno.bootloader.path=optiboot
+uno.bootloader.file=optiboot_atmega328.hex
+uno.bootloader.unlock_bits=0x3F
+uno.bootloader.lock_bits=0x0F
+uno.build.mcu=atmega328p
+uno.build.f_cpu=16000000L
+uno.build.core=arduino
+
+##############################################################
+
+atmega328.name=Arduino Duemilanove or Nano w/ ATmega328
+
+atmega328.upload.protocol=stk500
+atmega328.upload.maximum_size=30720
+atmega328.upload.speed=57600
+
+atmega328.bootloader.low_fuses=0xFF
+atmega328.bootloader.high_fuses=0xDA
+atmega328.bootloader.extended_fuses=0x05
+atmega328.bootloader.path=atmega
+atmega328.bootloader.file=ATmegaBOOT_168_atmega328.hex
+atmega328.bootloader.unlock_bits=0x3F
+atmega328.bootloader.lock_bits=0x0F
+
+atmega328.build.mcu=atmega328p
+atmega328.build.f_cpu=16000000L
+atmega328.build.core=arduino
+
+##############################################################
+
+diecimila.name=Arduino Diecimila, Duemilanove, or Nano w/ ATmega168
+
+diecimila.upload.protocol=stk500
+diecimila.upload.maximum_size=14336
+diecimila.upload.speed=19200
+
+diecimila.bootloader.low_fuses=0xff
+diecimila.bootloader.high_fuses=0xdd
+diecimila.bootloader.extended_fuses=0x00
+diecimila.bootloader.path=atmega
+diecimila.bootloader.file=ATmegaBOOT_168_diecimila.hex
+diecimila.bootloader.unlock_bits=0x3F
+diecimila.bootloader.lock_bits=0x0F
+
+diecimila.build.mcu=atmega168
+diecimila.build.f_cpu=16000000L
+diecimila.build.core=arduino
+
+##############################################################
+
+mega2560.name=Arduino Mega 2560
+
+mega2560.upload.protocol=stk500v2
+mega2560.upload.maximum_size=258048
+mega2560.upload.speed=115200
+
+mega2560.bootloader.low_fuses=0xFF
+mega2560.bootloader.high_fuses=0xD8
+mega2560.bootloader.extended_fuses=0xFD
+mega2560.bootloader.path=stk500v2
+mega2560.bootloader.file=stk500boot_v2_mega2560.hex
+mega2560.bootloader.unlock_bits=0x3F
+mega2560.bootloader.lock_bits=0x0F
+
+mega2560.build.mcu=atmega2560
+mega2560.build.f_cpu=16000000L
+mega2560.build.core=arduino
+
+##############################################################
+
+mega.name=Arduino Mega (ATmega1280)
+
+mega.upload.protocol=stk500
+mega.upload.maximum_size=126976
+mega.upload.speed=57600
+
+mega.bootloader.low_fuses=0xFF
+mega.bootloader.high_fuses=0xDA
+mega.bootloader.extended_fuses=0xF5
+mega.bootloader.path=atmega
+mega.bootloader.file=ATmegaBOOT_168_atmega1280.hex
+mega.bootloader.unlock_bits=0x3F
+mega.bootloader.lock_bits=0x0F
+
+mega.build.mcu=atmega1280
+mega.build.f_cpu=16000000L
+mega.build.core=arduino
+
+##############################################################
+
+mini.name=Arduino Mini
+
+mini.upload.protocol=stk500
+mini.upload.maximum_size=14336
+mini.upload.speed=19200
+
+mini.bootloader.low_fuses=0xff
+mini.bootloader.high_fuses=0xdd
+mini.bootloader.extended_fuses=0x00
+mini.bootloader.path=atmega
+mini.bootloader.file=ATmegaBOOT_168_ng.hex
+mini.bootloader.unlock_bits=0x3F
+mini.bootloader.lock_bits=0x0F
+
+mini.build.mcu=atmega168
+mini.build.f_cpu=16000000L
+mini.build.core=arduino
+
+##############################################################
+
+fio.name=Arduino Fio
+
+fio.upload.protocol=stk500
+fio.upload.maximum_size=30720
+fio.upload.speed=57600
+
+fio.bootloader.low_fuses=0xFF
+fio.bootloader.high_fuses=0xDA
+fio.bootloader.extended_fuses=0x05
+fio.bootloader.path=arduino:atmega
+fio.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex
+fio.bootloader.unlock_bits=0x3F
+fio.bootloader.lock_bits=0x0F
+
+fio.build.mcu=atmega328p
+fio.build.f_cpu=8000000L
+fio.build.core=arduino:arduino
+
+##############################################################
+
+bt328.name=Arduino BT w/ ATmega328
+
+bt328.upload.protocol=stk500
+bt328.upload.maximum_size=28672
+bt328.upload.speed=19200
+bt328.upload.disable_flushing=true
+
+bt328.bootloader.low_fuses=0xff
+bt328.bootloader.high_fuses=0xd8
+bt328.bootloader.extended_fuses=0x05
+bt328.bootloader.path=bt
+bt328.bootloader.file=ATmegaBOOT_168_atmega328_bt.hex
+bt328.bootloader.unlock_bits=0x3F
+bt328.bootloader.lock_bits=0x0F
+
+bt328.build.mcu=atmega328p
+bt328.build.f_cpu=16000000L
+bt328.build.core=arduino
+
+##############################################################
+
+bt.name=Arduino BT w/ ATmega168
+
+bt.upload.protocol=stk500
+bt.upload.maximum_size=14336
+bt.upload.speed=19200
+bt.upload.disable_flushing=true
+
+bt.bootloader.low_fuses=0xff
+bt.bootloader.high_fuses=0xdd
+bt.bootloader.extended_fuses=0x00
+bt.bootloader.path=bt
+bt.bootloader.file=ATmegaBOOT_168.hex
+bt.bootloader.unlock_bits=0x3F
+bt.bootloader.lock_bits=0x0F
+
+bt.build.mcu=atmega168
+bt.build.f_cpu=16000000L
+bt.build.core=arduino
+
+##############################################################
+
+lilypad328.name=LilyPad Arduino w/ ATmega328
+
+lilypad328.upload.protocol=stk500
+lilypad328.upload.maximum_size=30720
+lilypad328.upload.speed=57600
+
+lilypad328.bootloader.low_fuses=0xFF
+lilypad328.bootloader.high_fuses=0xDA
+lilypad328.bootloader.extended_fuses=0x05
+lilypad328.bootloader.path=atmega
+lilypad328.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex
+lilypad328.bootloader.unlock_bits=0x3F
+lilypad328.bootloader.lock_bits=0x0F
+
+lilypad328.build.mcu=atmega328p
+lilypad328.build.f_cpu=8000000L
+lilypad328.build.core=arduino
+
+##############################################################
+
+lilypad.name=LilyPad Arduino w/ ATmega168
+
+lilypad.upload.protocol=stk500
+lilypad.upload.maximum_size=14336
+lilypad.upload.speed=19200
+
+lilypad.bootloader.low_fuses=0xe2
+lilypad.bootloader.high_fuses=0xdd
+lilypad.bootloader.extended_fuses=0x00
+lilypad.bootloader.path=lilypad
+lilypad.bootloader.file=LilyPadBOOT_168.hex
+lilypad.bootloader.unlock_bits=0x3F
+lilypad.bootloader.lock_bits=0x0F
+
+lilypad.build.mcu=atmega168
+lilypad.build.f_cpu=8000000L
+lilypad.build.core=arduino
+
+##############################################################
+
+pro5v328.name=Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328
+
+pro5v328.upload.protocol=stk500
+pro5v328.upload.maximum_size=30720
+pro5v328.upload.speed=57600
+
+pro5v328.bootloader.low_fuses=0xFF
+pro5v328.bootloader.high_fuses=0xDA
+pro5v328.bootloader.extended_fuses=0x05
+pro5v328.bootloader.path=atmega
+pro5v328.bootloader.file=ATmegaBOOT_168_atmega328.hex
+pro5v328.bootloader.unlock_bits=0x3F
+pro5v328.bootloader.lock_bits=0x0F
+
+pro5v328.build.mcu=atmega328p
+pro5v328.build.f_cpu=16000000L
+pro5v328.build.core=arduino
+
+##############################################################
+
+pro5v.name=Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168
+
+pro5v.upload.protocol=stk500
+pro5v.upload.maximum_size=14336
+pro5v.upload.speed=19200
+
+pro5v.bootloader.low_fuses=0xff
+pro5v.bootloader.high_fuses=0xdd
+pro5v.bootloader.extended_fuses=0x00
+pro5v.bootloader.path=atmega
+pro5v.bootloader.file=ATmegaBOOT_168_diecimila.hex
+pro5v.bootloader.unlock_bits=0x3F
+pro5v.bootloader.lock_bits=0x0F
+
+pro5v.build.mcu=atmega168
+pro5v.build.f_cpu=16000000L
+pro5v.build.core=arduino
+
+##############################################################
+
+pro328.name=Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328
+
+pro328.upload.protocol=stk500
+pro328.upload.maximum_size=30720
+pro328.upload.speed=57600
+
+pro328.bootloader.low_fuses=0xFF
+pro328.bootloader.high_fuses=0xDA
+pro328.bootloader.extended_fuses=0x05
+pro328.bootloader.path=atmega
+pro328.bootloader.file=ATmegaBOOT_168_atmega328_pro_8MHz.hex
+pro328.bootloader.unlock_bits=0x3F
+pro328.bootloader.lock_bits=0x0F
+
+pro328.build.mcu=atmega328p
+pro328.build.f_cpu=8000000L
+pro328.build.core=arduino
+
+##############################################################
+
+pro.name=Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168
+
+pro.upload.protocol=stk500
+pro.upload.maximum_size=14336
+pro.upload.speed=19200
+
+pro.bootloader.low_fuses=0xc6
+pro.bootloader.high_fuses=0xdd
+pro.bootloader.extended_fuses=0x00
+pro.bootloader.path=atmega
+pro.bootloader.file=ATmegaBOOT_168_pro_8MHz.hex
+pro.bootloader.unlock_bits=0x3F
+pro.bootloader.lock_bits=0x0F
+
+pro.build.mcu=atmega168
+pro.build.f_cpu=8000000L
+pro.build.core=arduino
+
+##############################################################
+
+atmega168.name=Arduino NG or older w/ ATmega168
+
+atmega168.upload.protocol=stk500
+atmega168.upload.maximum_size=14336
+atmega168.upload.speed=19200
+
+atmega168.bootloader.low_fuses=0xff
+atmega168.bootloader.high_fuses=0xdd
+atmega168.bootloader.extended_fuses=0x00
+atmega168.bootloader.path=atmega
+atmega168.bootloader.file=ATmegaBOOT_168_ng.hex
+atmega168.bootloader.unlock_bits=0x3F
+atmega168.bootloader.lock_bits=0x0F
+
+atmega168.build.mcu=atmega168
+atmega168.build.f_cpu=16000000L
+atmega168.build.core=arduino
+
+##############################################################
+
+atmega8.name=Arduino NG or older w/ ATmega8
+
+atmega8.upload.protocol=stk500
+atmega8.upload.maximum_size=7168
+atmega8.upload.speed=19200
+
+atmega8.bootloader.low_fuses=0xdf
+atmega8.bootloader.high_fuses=0xca
+atmega8.bootloader.path=atmega8
+atmega8.bootloader.file=ATmegaBOOT.hex
+atmega8.bootloader.unlock_bits=0x3F
+atmega8.bootloader.lock_bits=0x0F
+
+atmega8.build.mcu=atmega8
+atmega8.build.f_cpu=16000000L
+atmega8.build.core=arduino
+
diff --git a/hardware/arduino/cores/arduino/HardwareSerial.cpp b/hardware/arduino/cores/arduino/HardwareSerial.cpp
new file mode 100644
index 0000000..4397efb
--- /dev/null
+++ b/hardware/arduino/cores/arduino/HardwareSerial.cpp
@@ -0,0 +1,303 @@
+/*
+ HardwareSerial.cpp - Hardware serial library for Wiring
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Modified 23 November 2006 by David A. Mellis
+ Modified 28 September 2010 by Mark Sproul
+*/
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include "wiring.h"
+#include "wiring_private.h"
+
+// this next line disables the entire HardwareSerial.cpp,
+// this is so I can support Attiny series and any other chip without a uart
+#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)
+
+#include "HardwareSerial.h"
+
+// Define constants and variables for buffering incoming serial data. We're
+// using a ring buffer (I think), in which rx_buffer_head is the index of the
+// location to which to write the next incoming character and rx_buffer_tail
+// is the index of the location from which to read.
+#if (RAMEND < 1000)
+ #define RX_BUFFER_SIZE 32
+#else
+ #define RX_BUFFER_SIZE 128
+#endif
+
+struct ring_buffer
+{
+ unsigned char buffer[RX_BUFFER_SIZE];
+ int head;
+ int tail;
+};
+
+#if defined(UBRRH) || defined(UBRR0H)
+ ring_buffer rx_buffer = { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR1H)
+ ring_buffer rx_buffer1 = { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR2H)
+ ring_buffer rx_buffer2 = { { 0 }, 0, 0 };
+#endif
+#if defined(UBRR3H)
+ ring_buffer rx_buffer3 = { { 0 }, 0, 0 };
+#endif
+
+inline void store_char(unsigned char c, ring_buffer *rx_buffer)
+{
+ int i = (unsigned int)(rx_buffer->head + 1) % RX_BUFFER_SIZE;
+
+ // if we should be storing the received character into the location
+ // just before the tail (meaning that the head would advance to the
+ // current location of the tail), we're about to overflow the buffer
+ // and so we don't write the character or advance the head.
+ if (i != rx_buffer->tail) {
+ rx_buffer->buffer[rx_buffer->head] = c;
+ rx_buffer->head = i;
+ }
+}
+
+#if defined(USART_RX_vect)
+ SIGNAL(USART_RX_vect)
+ {
+ #if defined(UDR0)
+ unsigned char c = UDR0;
+ #elif defined(UDR)
+ unsigned char c = UDR; // atmega8535
+ #else
+ #error UDR not defined
+ #endif
+ store_char(c, &rx_buffer);
+ }
+#elif defined(SIG_USART0_RECV) && defined(UDR0)
+ SIGNAL(SIG_USART0_RECV)
+ {
+ unsigned char c = UDR0;
+ store_char(c, &rx_buffer);
+ }
+#elif defined(SIG_UART0_RECV) && defined(UDR0)
+ SIGNAL(SIG_UART0_RECV)
+ {
+ unsigned char c = UDR0;
+ store_char(c, &rx_buffer);
+ }
+//#elif defined(SIG_USART_RECV)
+#elif defined(USART0_RX_vect)
+ // fixed by Mark Sproul this is on the 644/644p
+ //SIGNAL(SIG_USART_RECV)
+ SIGNAL(USART0_RX_vect)
+ {
+ #if defined(UDR0)
+ unsigned char c = UDR0;
+ #elif defined(UDR)
+ unsigned char c = UDR; // atmega8, atmega32
+ #else
+ #error UDR not defined
+ #endif
+ store_char(c, &rx_buffer);
+ }
+#elif defined(SIG_UART_RECV)
+ // this is for atmega8
+ SIGNAL(SIG_UART_RECV)
+ {
+ #if defined(UDR0)
+ unsigned char c = UDR0; // atmega645
+ #elif defined(UDR)
+ unsigned char c = UDR; // atmega8
+ #endif
+ store_char(c, &rx_buffer);
+ }
+#elif defined(USBCON)
+ #warning No interrupt handler for usart 0
+ #warning Serial(0) is on USB interface
+#else
+ #error No interrupt handler for usart 0
+#endif
+
+//#if defined(SIG_USART1_RECV)
+#if defined(USART1_RX_vect)
+ //SIGNAL(SIG_USART1_RECV)
+ SIGNAL(USART1_RX_vect)
+ {
+ unsigned char c = UDR1;
+ store_char(c, &rx_buffer1);
+ }
+#elif defined(SIG_USART1_RECV)
+ #error SIG_USART1_RECV
+#endif
+
+#if defined(USART2_RX_vect) && defined(UDR2)
+ SIGNAL(USART2_RX_vect)
+ {
+ unsigned char c = UDR2;
+ store_char(c, &rx_buffer2);
+ }
+#elif defined(SIG_USART2_RECV)
+ #error SIG_USART2_RECV
+#endif
+
+#if defined(USART3_RX_vect) && defined(UDR3)
+ SIGNAL(USART3_RX_vect)
+ {
+ unsigned char c = UDR3;
+ store_char(c, &rx_buffer3);
+ }
+#elif defined(SIG_USART3_RECV)
+ #error SIG_USART3_RECV
+#endif
+
+
+
+// Constructors ////////////////////////////////////////////////////////////////
+
+HardwareSerial::HardwareSerial(ring_buffer *rx_buffer,
+ volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
+ volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
+ volatile uint8_t *udr,
+ uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x)
+{
+ _rx_buffer = rx_buffer;
+ _ubrrh = ubrrh;
+ _ubrrl = ubrrl;
+ _ucsra = ucsra;
+ _ucsrb = ucsrb;
+ _udr = udr;
+ _rxen = rxen;
+ _txen = txen;
+ _rxcie = rxcie;
+ _udre = udre;
+ _u2x = u2x;
+}
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+void HardwareSerial::begin(long baud)
+{
+ uint16_t baud_setting;
+ bool use_u2x = true;
+
+#if F_CPU == 16000000UL
+ // hardcoded exception for compatibility with the bootloader shipped
+ // with the Duemilanove and previous boards and the firmware on the 8U2
+ // on the Uno and Mega 2560.
+ if (baud == 57600) {
+ use_u2x = false;
+ }
+#endif
+
+ if (use_u2x) {
+ *_ucsra = 1 << _u2x;
+ baud_setting = (F_CPU / 4 / baud - 1) / 2;
+ } else {
+ *_ucsra = 0;
+ baud_setting = (F_CPU / 8 / baud - 1) / 2;
+ }
+
+ // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
+ *_ubrrh = baud_setting >> 8;
+ *_ubrrl = baud_setting;
+
+ sbi(*_ucsrb, _rxen);
+ sbi(*_ucsrb, _txen);
+ sbi(*_ucsrb, _rxcie);
+}
+
+void HardwareSerial::end()
+{
+ cbi(*_ucsrb, _rxen);
+ cbi(*_ucsrb, _txen);
+ cbi(*_ucsrb, _rxcie);
+}
+
+int HardwareSerial::available(void)
+{
+ return (unsigned int)(RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE;
+}
+
+int HardwareSerial::peek(void)
+{
+ if (_rx_buffer->head == _rx_buffer->tail) {
+ return -1;
+ } else {
+ return _rx_buffer->buffer[_rx_buffer->tail];
+ }
+}
+
+int HardwareSerial::read(void)
+{
+ // if the head isn't ahead of the tail, we don't have any characters
+ if (_rx_buffer->head == _rx_buffer->tail) {
+ return -1;
+ } else {
+ unsigned char c = _rx_buffer->buffer[_rx_buffer->tail];
+ _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % RX_BUFFER_SIZE;
+ return c;
+ }
+}
+
+void HardwareSerial::flush()
+{
+ // don't reverse this or there may be problems if the RX interrupt
+ // occurs after reading the value of rx_buffer_head but before writing
+ // the value to rx_buffer_tail; the previous value of rx_buffer_head
+ // may be written to rx_buffer_tail, making it appear as if the buffer
+ // don't reverse this or there may be problems if the RX interrupt
+ // occurs after reading the value of rx_buffer_head but before writing
+ // the value to rx_buffer_tail; the previous value of rx_buffer_head
+ // may be written to rx_buffer_tail, making it appear as if the buffer
+ // were full, not empty.
+ _rx_buffer->head = _rx_buffer->tail;
+}
+
+void HardwareSerial::write(uint8_t c)
+{
+ while (!((*_ucsra) & (1 << _udre)))
+ ;
+
+ *_udr = c;
+}
+
+// Preinstantiate Objects //////////////////////////////////////////////////////
+
+#if defined(UBRRH) && defined(UBRRL)
+ HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE, U2X);
+#elif defined(UBRR0H) && defined(UBRR0L)
+ HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0);
+#elif defined(USBCON)
+ #warning no serial port defined (port 0)
+#else
+ #error no serial port defined (port 0)
+#endif
+
+#if defined(UBRR1H)
+ HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1, U2X1);
+#endif
+#if defined(UBRR2H)
+ HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2, U2X2);
+#endif
+#if defined(UBRR3H)
+ HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3, U2X3);
+#endif
+
+#endif // whole file
+
diff --git a/hardware/arduino/cores/arduino/HardwareSerial.h b/hardware/arduino/cores/arduino/HardwareSerial.h
new file mode 100644
index 0000000..3efa775
--- /dev/null
+++ b/hardware/arduino/cores/arduino/HardwareSerial.h
@@ -0,0 +1,76 @@
+/*
+ HardwareSerial.h - Hardware serial library for Wiring
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Modified 28 September 2010 by Mark Sproul
+*/
+
+#ifndef HardwareSerial_h
+#define HardwareSerial_h
+
+#include <inttypes.h>
+
+#include "Stream.h"
+
+struct ring_buffer;
+
+class HardwareSerial : public Stream
+{
+ private:
+ ring_buffer *_rx_buffer;
+ volatile uint8_t *_ubrrh;
+ volatile uint8_t *_ubrrl;
+ volatile uint8_t *_ucsra;
+ volatile uint8_t *_ucsrb;
+ volatile uint8_t *_udr;
+ uint8_t _rxen;
+ uint8_t _txen;
+ uint8_t _rxcie;
+ uint8_t _udre;
+ uint8_t _u2x;
+ public:
+ HardwareSerial(ring_buffer *rx_buffer,
+ volatile uint8_t *ubrrh, volatile uint8_t *ubrrl,
+ volatile uint8_t *ucsra, volatile uint8_t *ucsrb,
+ volatile uint8_t *udr,
+ uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x);
+ void begin(long);
+ void end();
+ virtual int available(void);
+ virtual int peek(void);
+ virtual int read(void);
+ virtual void flush(void);
+ virtual void write(uint8_t);
+ using Print::write; // pull in write(str) and write(buf, size) from Print
+};
+
+#if defined(UBRRH) || defined(UBRR0H)
+ extern HardwareSerial Serial;
+#elif defined(USBCON)
+ #include "usb_api.h"
+#endif
+#if defined(UBRR1H)
+ extern HardwareSerial Serial1;
+#endif
+#if defined(UBRR2H)
+ extern HardwareSerial Serial2;
+#endif
+#if defined(UBRR3H)
+ extern HardwareSerial Serial3;
+#endif
+
+#endif
diff --git a/hardware/arduino/cores/arduino/Print.cpp b/hardware/arduino/cores/arduino/Print.cpp
new file mode 100755
index 0000000..4ee556d
--- /dev/null
+++ b/hardware/arduino/cores/arduino/Print.cpp
@@ -0,0 +1,220 @@
+/*
+ Print.cpp - Base class that provides print() and println()
+ Copyright (c) 2008 David A. Mellis. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+ Modified 23 November 2006 by David A. Mellis
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <math.h>
+#include "wiring.h"
+
+#include "Print.h"
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+/* default implementation: may be overridden */
+void Print::write(const char *str)
+{
+ while (*str)
+ write(*str++);
+}
+
+/* default implementation: may be overridden */
+void Print::write(const uint8_t *buffer, size_t size)
+{
+ while (size--)
+ write(*buffer++);
+}
+
+void Print::print(const String &s)
+{
+ for (int i = 0; i < s.length(); i++) {
+ write(s[i]);
+ }
+}
+
+void Print::print(const char str[])
+{
+ write(str);
+}
+
+void Print::print(char c, int base)
+{
+ print((long) c, base);
+}
+
+void Print::print(unsigned char b, int base)
+{
+ print((unsigned long) b, base);
+}
+
+void Print::print(int n, int base)
+{
+ print((long) n, base);
+}
+
+void Print::print(unsigned int n, int base)
+{
+ print((unsigned long) n, base);
+}
+
+void Print::print(long n, int base)
+{
+ if (base == 0) {
+ write(n);
+ } else if (base == 10) {
+ if (n < 0) {
+ print('-');
+ n = -n;
+ }
+ printNumber(n, 10);
+ } else {
+ printNumber(n, base);
+ }
+}
+
+void Print::print(unsigned long n, int base)
+{
+ if (base == 0) write(n);
+ else printNumber(n, base);
+}
+
+void Print::print(double n, int digits)
+{
+ printFloat(n, digits);
+}
+
+void Print::println(void)
+{
+ print('\r');
+ print('\n');
+}
+
+void Print::println(const String &s)
+{
+ print(s);
+ println();
+}
+
+void Print::println(const char c[])
+{
+ print(c);
+ println();
+}
+
+void Print::println(char c, int base)
+{
+ print(c, base);
+ println();
+}
+
+void Print::println(unsigned char b, int base)
+{
+ print(b, base);
+ println();
+}
+
+void Print::println(int n, int base)
+{
+ print(n, base);
+ println();
+}
+
+void Print::println(unsigned int n, int base)
+{
+ print(n, base);
+ println();
+}
+
+void Print::println(long n, int base)
+{
+ print(n, base);
+ println();
+}
+
+void Print::println(unsigned long n, int base)
+{
+ print(n, base);
+ println();
+}
+
+void Print::println(double n, int digits)
+{
+ print(n, digits);
+ println();
+}
+
+// Private Methods /////////////////////////////////////////////////////////////
+
+void Print::printNumber(unsigned long n, uint8_t base)
+{
+ unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars.
+ unsigned long i = 0;
+
+ if (n == 0) {
+ print('0');
+ return;
+ }
+
+ while (n > 0) {
+ buf[i++] = n % base;
+ n /= base;
+ }
+
+ for (; i > 0; i--)
+ print((char) (buf[i - 1] < 10 ?
+ '0' + buf[i - 1] :
+ 'A' + buf[i - 1] - 10));
+}
+
+void Print::printFloat(double number, uint8_t digits)
+{
+ // Handle negative numbers
+ if (number < 0.0)
+ {
+ print('-');
+ number = -number;
+ }
+
+ // Round correctly so that print(1.999, 2) prints as "2.00"
+ double rounding = 0.5;
+ for (uint8_t i=0; i<digits; ++i)
+ rounding /= 10.0;
+
+ number += rounding;
+
+ // Extract the integer part of the number and print it
+ unsigned long int_part = (unsigned long)number;
+ double remainder = number - (double)int_part;
+ print(int_part);
+
+ // Print the decimal point, but only if there are digits beyond
+ if (digits > 0)
+ print(".");
+
+ // Extract digits from the remainder one at a time
+ while (digits-- > 0)
+ {
+ remainder *= 10.0;
+ int toPrint = int(remainder);
+ print(toPrint);
+ remainder -= toPrint;
+ }
+}
diff --git a/hardware/arduino/cores/arduino/Print.h b/hardware/arduino/cores/arduino/Print.h
new file mode 100755
index 0000000..b092ae5
--- /dev/null
+++ b/hardware/arduino/cores/arduino/Print.h
@@ -0,0 +1,66 @@
+/*
+ Print.h - Base class that provides print() and println()
+ Copyright (c) 2008 David A. Mellis. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef Print_h
+#define Print_h
+
+#include <inttypes.h>
+#include <stdio.h> // for size_t
+
+#include "WString.h"
+
+#define DEC 10
+#define HEX 16
+#define OCT 8
+#define BIN 2
+#define BYTE 0
+
+class Print
+{
+ private:
+ void printNumber(unsigned long, uint8_t);
+ void printFloat(double, uint8_t);
+ public:
+ virtual void write(uint8_t) = 0;
+ virtual void write(const char *str);
+ virtual void write(const uint8_t *buffer, size_t size);
+
+ void print(const String &);
+ void print(const char[]);
+ void print(char, int = BYTE);
+ void print(unsigned char, int = BYTE);
+ void print(int, int = DEC);
+ void print(unsigned int, int = DEC);
+ void print(long, int = DEC);
+ void print(unsigned long, int = DEC);
+ void print(double, int = 2);
+
+ void println(const String &s);
+ void println(const char[]);
+ void println(char, int = BYTE);
+ void println(unsigned char, int = BYTE);
+ void println(int, int = DEC);
+ void println(unsigned int, int = DEC);
+ void println(long, int = DEC);
+ void println(unsigned long, int = DEC);
+ void println(double, int = 2);
+ void println(void);
+};
+
+#endif
diff --git a/hardware/arduino/cores/arduino/Stream.h b/hardware/arduino/cores/arduino/Stream.h
new file mode 100644
index 0000000..93d8275
--- /dev/null
+++ b/hardware/arduino/cores/arduino/Stream.h
@@ -0,0 +1,35 @@
+/*
+ Stream.h - base class for character-based streams.
+ Copyright (c) 2010 David A. Mellis. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef Stream_h
+#define Stream_h
+
+#include <inttypes.h>
+#include "Print.h"
+
+class Stream : public Print
+{
+ public:
+ virtual int available() = 0;
+ virtual int read() = 0;
+ virtual int peek() = 0;
+ virtual void flush() = 0;
+};
+
+#endif
diff --git a/hardware/arduino/cores/arduino/Tone.cpp b/hardware/arduino/cores/arduino/Tone.cpp
new file mode 100755
index 0000000..c3910e7
--- /dev/null
+++ b/hardware/arduino/cores/arduino/Tone.cpp
@@ -0,0 +1,601 @@
+/* Tone.cpp
+
+ A Tone Generator Library
+
+ Written by Brett Hagman
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+Version Modified By Date Comments
+------- ----------- -------- --------
+0001 B Hagman 09/08/02 Initial coding
+0002 B Hagman 09/08/18 Multiple pins
+0003 B Hagman 09/08/18 Moved initialization from constructor to begin()
+0004 B Hagman 09/09/26 Fixed problems with ATmega8
+0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers
+ 09/11/25 Changed pin toggle method to XOR
+ 09/11/25 Fixed timer0 from being excluded
+0006 D Mellis 09/12/29 Replaced objects with functions
+0007 M Sproul 10/08/29 Changed #ifdefs from cpu to register
+*************************************************/
+
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include "wiring.h"
+#include "pins_arduino.h"
+
+#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__)
+#define TCCR2A TCCR2
+#define TCCR2B TCCR2
+#define COM2A1 COM21
+#define COM2A0 COM20
+#define OCR2A OCR2
+#define TIMSK2 TIMSK
+#define OCIE2A OCIE2
+#define TIMER2_COMPA_vect TIMER2_COMP_vect
+#define TIMSK1 TIMSK
+#endif
+
+// timerx_toggle_count:
+// > 0 - duration specified
+// = 0 - stopped
+// < 0 - infinitely (until stop() method called, or new play() called)
+
+#if !defined(__AVR_ATmega8__)
+volatile long timer0_toggle_count;
+volatile uint8_t *timer0_pin_port;
+volatile uint8_t timer0_pin_mask;
+#endif
+
+volatile long timer1_toggle_count;
+volatile uint8_t *timer1_pin_port;
+volatile uint8_t timer1_pin_mask;
+volatile long timer2_toggle_count;
+volatile uint8_t *timer2_pin_port;
+volatile uint8_t timer2_pin_mask;
+
+#if defined(TIMSK3)
+volatile long timer3_toggle_count;
+volatile uint8_t *timer3_pin_port;
+volatile uint8_t timer3_pin_mask;
+#endif
+
+#if defined(TIMSK4)
+volatile long timer4_toggle_count;
+volatile uint8_t *timer4_pin_port;
+volatile uint8_t timer4_pin_mask;
+#endif
+
+#if defined(TIMSK5)
+volatile long timer5_toggle_count;
+volatile uint8_t *timer5_pin_port;
+volatile uint8_t timer5_pin_mask;
+#endif
+
+
+// MLS: This does not make sense, the 3 options are the same
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+
+#define AVAILABLE_TONE_PINS 1
+
+const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ };
+static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ };
+
+#elif defined(__AVR_ATmega8__)
+
+#define AVAILABLE_TONE_PINS 1
+
+const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ };
+static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ };
+
+#else
+
+#define AVAILABLE_TONE_PINS 1
+
+// Leave timer 0 to last.
+const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ };
+static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ };
+
+#endif
+
+
+
+static int8_t toneBegin(uint8_t _pin)
+{
+ int8_t _timer = -1;
+
+ // if we're already using the pin, the timer should be configured.
+ for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
+ if (tone_pins[i] == _pin) {
+ return pgm_read_byte(tone_pin_to_timer_PGM + i);
+ }
+ }
+
+ // search for an unused timer.
+ for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
+ if (tone_pins[i] == 255) {
+ tone_pins[i] = _pin;
+ _timer = pgm_read_byte(tone_pin_to_timer_PGM + i);
+ break;
+ }
+ }
+
+ if (_timer != -1)
+ {
+ // Set timer specific stuff
+ // All timers in CTC mode
+ // 8 bit timers will require changing prescalar values,
+ // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar
+ switch (_timer)
+ {
+ #if defined(TCCR0A) && defined(TCCR0B)
+ case 0:
+ // 8 bit timer
+ TCCR0A = 0;
+ TCCR0B = 0;
+ bitWrite(TCCR0A, WGM01, 1);
+ bitWrite(TCCR0B, CS00, 1);
+ timer0_pin_port = portOutputRegister(digitalPinToPort(_pin));
+ timer0_pin_mask = digitalPinToBitMask(_pin);
+ break;
+ #endif
+
+ #if defined(TCCR1A) && defined(TCCR1B) && defined(WGM12)
+ case 1:
+ // 16 bit timer
+ TCCR1A = 0;
+ TCCR1B = 0;
+ bitWrite(TCCR1B, WGM12, 1);
+ bitWrite(TCCR1B, CS10, 1);
+ timer1_pin_port = portOutputRegister(digitalPinToPort(_pin));
+ timer1_pin_mask = digitalPinToBitMask(_pin);
+ break;
+ #endif
+
+ #if defined(TCCR2A) && defined(TCCR2B)
+ case 2:
+ // 8 bit timer
+ TCCR2A = 0;
+ TCCR2B = 0;
+ bitWrite(TCCR2A, WGM21, 1);
+ bitWrite(TCCR2B, CS20, 1);
+ timer2_pin_port = portOutputRegister(digitalPinToPort(_pin));
+ timer2_pin_mask = digitalPinToBitMask(_pin);
+ break;
+ #endif
+
+ #if defined(TCCR3A) && defined(TCCR3B) && defined(TIMSK3)
+ case 3:
+ // 16 bit timer
+ TCCR3A = 0;
+ TCCR3B = 0;
+ bitWrite(TCCR3B, WGM32, 1);
+ bitWrite(TCCR3B, CS30, 1);
+ timer3_pin_port = portOutputRegister(digitalPinToPort(_pin));
+ timer3_pin_mask = digitalPinToBitMask(_pin);
+ break;
+ #endif
+
+ #if defined(TCCR4A) && defined(TCCR4B) && defined(TIMSK4)
+ case 4:
+ // 16 bit timer
+ TCCR4A = 0;
+ TCCR4B = 0;
+ #if defined(WGM42)
+ bitWrite(TCCR4B, WGM42, 1);
+ #elif defined(CS43)
+ #warning this may not be correct
+ // atmega32u4
+ bitWrite(TCCR4B, CS43, 1);
+ #endif
+ bitWrite(TCCR4B, CS40, 1);
+ timer4_pin_port = portOutputRegister(digitalPinToPort(_pin));
+ timer4_pin_mask = digitalPinToBitMask(_pin);
+ break;
+ #endif
+
+ #if defined(TCCR5A) && defined(TCCR5B) && defined(TIMSK5)
+ case 5:
+ // 16 bit timer
+ TCCR5A = 0;
+ TCCR5B = 0;
+ bitWrite(TCCR5B, WGM52, 1);
+ bitWrite(TCCR5B, CS50, 1);
+ timer5_pin_port = portOutputRegister(digitalPinToPort(_pin));
+ timer5_pin_mask = digitalPinToBitMask(_pin);
+ break;
+ #endif
+ }
+ }
+
+ return _timer;
+}
+
+
+
+// frequency (in hertz) and duration (in milliseconds).
+
+void tone(uint8_t _pin, unsigned int frequency, unsigned long duration)
+{
+ uint8_t prescalarbits = 0b001;
+ long toggle_count = 0;
+ uint32_t ocr = 0;
+ int8_t _timer;
+
+ _timer = toneBegin(_pin);
+
+ if (_timer >= 0)
+ {
+ // Set the pinMode as OUTPUT
+ pinMode(_pin, OUTPUT);
+
+ // if we are using an 8 bit timer, scan through prescalars to find the best fit
+ if (_timer == 0 || _timer == 2)
+ {
+ ocr = F_CPU / frequency / 2 - 1;
+ prescalarbits = 0b001; // ck/1: same for both timers
+ if (ocr > 255)
+ {
+ ocr = F_CPU / frequency / 2 / 8 - 1;
+ prescalarbits = 0b010; // ck/8: same for both timers
+
+ if (_timer == 2 && ocr > 255)
+ {
+ ocr = F_CPU / frequency / 2 / 32 - 1;
+ prescalarbits = 0b011;
+ }
+
+ if (ocr > 255)
+ {
+ ocr = F_CPU / frequency / 2 / 64 - 1;
+ prescalarbits = _timer == 0 ? 0b011 : 0b100;
+
+ if (_timer == 2 && ocr > 255)
+ {
+ ocr = F_CPU / frequency / 2 / 128 - 1;
+ prescalarbits = 0b101;
+ }
+
+ if (ocr > 255)
+ {
+ ocr = F_CPU / frequency / 2 / 256 - 1;
+ prescalarbits = _timer == 0 ? 0b100 : 0b110;
+ if (ocr > 255)
+ {
+ // can't do any better than /1024
+ ocr = F_CPU / frequency / 2 / 1024 - 1;
+ prescalarbits = _timer == 0 ? 0b101 : 0b111;
+ }
+ }
+ }
+ }
+
+#if defined(TCCR0B)
+ if (_timer == 0)
+ {
+ TCCR0B = prescalarbits;
+ }
+ else
+#endif
+#if defined(TCCR2B)
+ {
+ TCCR2B = prescalarbits;
+ }
+#else
+ {
+ // dummy place holder to make the above ifdefs work
+ }
+#endif
+ }
+ else
+ {
+ // two choices for the 16 bit timers: ck/1 or ck/64
+ ocr = F_CPU / frequency / 2 - 1;
+
+ prescalarbits = 0b001;
+ if (ocr > 0xffff)
+ {
+ ocr = F_CPU / frequency / 2 / 64 - 1;
+ prescalarbits = 0b011;
+ }
+
+ if (_timer == 1)
+ {
+#if defined(TCCR1B)
+ TCCR1B = (TCCR1B & 0b11111000) | prescalarbits;
+#endif
+ }
+#if defined(TCCR3B)
+ else if (_timer == 3)
+ TCCR3B = (TCCR3B & 0b11111000) | prescalarbits;
+#endif
+#if defined(TCCR4B)
+ else if (_timer == 4)
+ TCCR4B = (TCCR4B & 0b11111000) | prescalarbits;
+#endif
+#if defined(TCCR5B)
+ else if (_timer == 5)
+ TCCR5B = (TCCR5B & 0b11111000) | prescalarbits;
+#endif
+
+ }
+
+
+ // Calculate the toggle count
+ if (duration > 0)
+ {
+ toggle_count = 2 * frequency * duration / 1000;
+ }
+ else
+ {
+ toggle_count = -1;
+ }
+
+ // Set the OCR for the given timer,
+ // set the toggle count,
+ // then turn on the interrupts
+ switch (_timer)
+ {
+
+#if defined(OCR0A) && defined(TIMSK0) && defined(OCIE0A)
+ case 0:
+ OCR0A = ocr;
+ timer0_toggle_count = toggle_count;
+ bitWrite(TIMSK0, OCIE0A, 1);
+ break;
+#endif
+
+ case 1:
+#if defined(OCR1A) && defined(TIMSK1) && defined(OCIE1A)
+ OCR1A = ocr;
+ timer1_toggle_count = toggle_count;
+ bitWrite(TIMSK1, OCIE1A, 1);
+#elif defined(OCR1A) && defined(TIMSK) && defined(OCIE1A)
+ // this combination is for at least the ATmega32
+ OCR1A = ocr;
+ timer1_toggle_count = toggle_count;
+ bitWrite(TIMSK, OCIE1A, 1);
+#endif
+ break;
+
+#if defined(OCR2A) && defined(TIMSK2) && defined(OCIE2A)
+ case 2:
+ OCR2A = ocr;
+ timer2_toggle_count = toggle_count;
+ bitWrite(TIMSK2, OCIE2A, 1);
+ break;
+#endif
+
+#if defined(TIMSK3)
+ case 3:
+ OCR3A = ocr;
+ timer3_toggle_count = toggle_count;
+ bitWrite(TIMSK3, OCIE3A, 1);
+ break;
+#endif
+
+#if defined(TIMSK4)
+ case 4:
+ OCR4A = ocr;
+ timer4_toggle_count = toggle_count;
+ bitWrite(TIMSK4, OCIE4A, 1);
+ break;
+#endif
+
+#if defined(OCR5A) && defined(TIMSK5) && defined(OCIE5A)
+ case 5:
+ OCR5A = ocr;
+ timer5_toggle_count = toggle_count;
+ bitWrite(TIMSK5, OCIE5A, 1);
+ break;
+#endif
+
+ }
+ }
+}
+
+
+// XXX: this function only works properly for timer 2 (the only one we use
+// currently). for the others, it should end the tone, but won't restore
+// proper PWM functionality for the timer.
+void disableTimer(uint8_t _timer)
+{
+ switch (_timer)
+ {
+ case 0:
+ #if defined(TIMSK0)
+ TIMSK0 = 0;
+ #elif defined(TIMSK)
+ TIMSK = 0; // atmega32
+ #endif
+ break;
+
+#if defined(TIMSK1) && defined(OCIE1A)
+ case 1:
+ bitWrite(TIMSK1, OCIE1A, 0);
+ break;
+#endif
+
+ case 2:
+ #if defined(TIMSK2) && defined(OCIE2A)
+ bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt
+ #endif
+ #if defined(TCCR2A) && defined(WGM20)
+ TCCR2A = (1 << WGM20);
+ #endif
+ #if defined(TCCR2B) && defined(CS22)
+ TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22);
+ #endif
+ #if defined(OCR2A)
+ OCR2A = 0;
+ #endif
+ break;
+
+#if defined(TIMSK3)
+ case 3:
+ TIMSK3 = 0;
+ break;
+#endif
+
+#if defined(TIMSK4)
+ case 4:
+ TIMSK4 = 0;
+ break;
+#endif
+
+#if defined(TIMSK5)
+ case 5:
+ TIMSK5 = 0;
+ break;
+#endif
+ }
+}
+
+
+void noTone(uint8_t _pin)
+{
+ int8_t _timer = -1;
+
+ for (int i = 0; i < AVAILABLE_TONE_PINS; i++) {
+ if (tone_pins[i] == _pin) {
+ _timer = pgm_read_byte(tone_pin_to_timer_PGM + i);
+ tone_pins[i] = 255;
+ }
+ }
+
+ disableTimer(_timer);
+
+ digitalWrite(_pin, 0);
+}
+
+#if 0
+#if !defined(__AVR_ATmega8__)
+ISR(TIMER0_COMPA_vect)
+{
+ if (timer0_toggle_count != 0)
+ {
+ // toggle the pin
+ *timer0_pin_port ^= timer0_pin_mask;
+
+ if (timer0_toggle_count > 0)
+ timer0_toggle_count--;
+ }
+ else
+ {
+ disableTimer(0);
+ *timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop
+ }
+}
+#endif
+
+
+ISR(TIMER1_COMPA_vect)
+{
+ if (timer1_toggle_count != 0)
+ {
+ // toggle the pin
+ *timer1_pin_port ^= timer1_pin_mask;
+
+ if (timer1_toggle_count > 0)
+ timer1_toggle_count--;
+ }
+ else
+ {
+ disableTimer(1);
+ *timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop
+ }
+}
+#endif
+
+
+ISR(TIMER2_COMPA_vect)
+{
+
+ if (timer2_toggle_count != 0)
+ {
+ // toggle the pin
+ *timer2_pin_port ^= timer2_pin_mask;
+
+ if (timer2_toggle_count > 0)
+ timer2_toggle_count--;
+ }
+ else
+ {
+ // need to call noTone() so that the tone_pins[] entry is reset, so the
+ // timer gets initialized next time we call tone().
+ // XXX: this assumes timer 2 is always the first one used.
+ noTone(tone_pins[0]);
+// disableTimer(2);
+// *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop
+ }
+}
+
+
+
+//#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#if 0
+
+ISR(TIMER3_COMPA_vect)
+{
+ if (timer3_toggle_count != 0)
+ {
+ // toggle the pin
+ *timer3_pin_port ^= timer3_pin_mask;
+
+ if (timer3_toggle_count > 0)
+ timer3_toggle_count--;
+ }
+ else
+ {
+ disableTimer(3);
+ *timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop
+ }
+}
+
+ISR(TIMER4_COMPA_vect)
+{
+ if (timer4_toggle_count != 0)
+ {
+ // toggle the pin
+ *timer4_pin_port ^= timer4_pin_mask;
+
+ if (timer4_toggle_count > 0)
+ timer4_toggle_count--;
+ }
+ else
+ {
+ disableTimer(4);
+ *timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop
+ }
+}
+
+ISR(TIMER5_COMPA_vect)
+{
+ if (timer5_toggle_count != 0)
+ {
+ // toggle the pin
+ *timer5_pin_port ^= timer5_pin_mask;
+
+ if (timer5_toggle_count > 0)
+ timer5_toggle_count--;
+ }
+ else
+ {
+ disableTimer(5);
+ *timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop
+ }
+}
+
+#endif
diff --git a/hardware/arduino/cores/arduino/WCharacter.h b/hardware/arduino/cores/arduino/WCharacter.h
new file mode 100644
index 0000000..79733b5
--- /dev/null
+++ b/hardware/arduino/cores/arduino/WCharacter.h
@@ -0,0 +1,168 @@
+/*
+ WCharacter.h - Character utility functions for Wiring & Arduino
+ Copyright (c) 2010 Hernando Barragan. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef Character_h
+#define Character_h
+
+#include <ctype.h>
+
+// WCharacter.h prototypes
+inline boolean isAlphaNumeric(int c) __attribute__((always_inline));
+inline boolean isAlpha(int c) __attribute__((always_inline));
+inline boolean isAscii(int c) __attribute__((always_inline));
+inline boolean isWhitespace(int c) __attribute__((always_inline));
+inline boolean isControl(int c) __attribute__((always_inline));
+inline boolean isDigit(int c) __attribute__((always_inline));
+inline boolean isGraph(int c) __attribute__((always_inline));
+inline boolean isLowerCase(int c) __attribute__((always_inline));
+inline boolean isPrintable(int c) __attribute__((always_inline));
+inline boolean isPunct(int c) __attribute__((always_inline));
+inline boolean isSpace(int c) __attribute__((always_inline));
+inline boolean isUpperCase(int c) __attribute__((always_inline));
+inline boolean isHexadecimalDigit(int c) __attribute__((always_inline));
+inline int toAscii(int c) __attribute__((always_inline));
+inline int toLowerCase(int c) __attribute__((always_inline));
+inline int toUpperCase(int c)__attribute__((always_inline));
+
+
+// Checks for an alphanumeric character.
+// It is equivalent to (isalpha(c) || isdigit(c)).
+inline boolean isAlphaNumeric(int c)
+{
+ return ( isalnum(c) == 0 ? false : true);
+}
+
+
+// Checks for an alphabetic character.
+// It is equivalent to (isupper(c) || islower(c)).
+inline boolean isAlpha(int c)
+{
+ return ( isalpha(c) == 0 ? false : true);
+}
+
+
+// Checks whether c is a 7-bit unsigned char value
+// that fits into the ASCII character set.
+inline boolean isAscii(int c)
+{
+ return ( isascii (c) == 0 ? false : true);
+}
+
+
+// Checks for a blank character, that is, a space or a tab.
+inline boolean isWhitespace(int c)
+{
+ return ( isblank (c) == 0 ? false : true);
+}
+
+
+// Checks for a control character.
+inline boolean isControl(int c)
+{
+ return ( iscntrl (c) == 0 ? false : true);
+}
+
+
+// Checks for a digit (0 through 9).
+inline boolean isDigit(int c)
+{
+ return ( isdigit (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character except space.
+inline boolean isGraph(int c)
+{
+ return ( isgraph (c) == 0 ? false : true);
+}
+
+
+// Checks for a lower-case character.
+inline boolean isLowerCase(int c)
+{
+ return (islower (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character including space.
+inline boolean isPrintable(int c)
+{
+ return ( isprint (c) == 0 ? false : true);
+}
+
+
+// Checks for any printable character which is not a space
+// or an alphanumeric character.
+inline boolean isPunct(int c)
+{
+ return ( ispunct (c) == 0 ? false : true);
+}
+
+
+// Checks for white-space characters. For the avr-libc library,
+// these are: space, formfeed ('\f'), newline ('\n'), carriage
+// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v').
+inline boolean isSpace(int c)
+{
+ return ( isspace (c) == 0 ? false : true);
+}
+
+
+// Checks for an uppercase letter.
+inline boolean isUpperCase(int c)
+{
+ return ( isupper (c) == 0 ? false : true);
+}
+
+
+// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7
+// 8 9 a b c d e f A B C D E F.
+inline boolean isHexadecimalDigit(int c)
+{
+ return ( isxdigit (c) == 0 ? false : true);
+}
+
+
+// Converts c to a 7-bit unsigned char value that fits into the
+// ASCII character set, by clearing the high-order bits.
+inline int toAscii(int c)
+{
+ return toascii (c);
+}
+
+
+// Warning:
+// Many people will be unhappy if you use this function.
+// This function will convert accented letters into random
+// characters.
+
+// Converts the letter c to lower case, if possible.
+inline int toLowerCase(int c)
+{
+ return tolower (c);
+}
+
+
+// Converts the letter c to upper case, if possible.
+inline int toUpperCase(int c)
+{
+ return toupper (c);
+}
+
+#endif
\ No newline at end of file
diff --git a/hardware/arduino/cores/arduino/WConstants.h b/hardware/arduino/cores/arduino/WConstants.h
new file mode 100644
index 0000000..3e19ac4
--- /dev/null
+++ b/hardware/arduino/cores/arduino/WConstants.h
@@ -0,0 +1 @@
+#include "wiring.h"
diff --git a/hardware/arduino/cores/arduino/WInterrupts.c b/hardware/arduino/cores/arduino/WInterrupts.c
new file mode 100755
index 0000000..3b3e0c9
--- /dev/null
+++ b/hardware/arduino/cores/arduino/WInterrupts.c
@@ -0,0 +1,249 @@
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+ Part of the Wiring project - http://wiring.uniandes.edu.co
+
+ Copyright (c) 2004-05 Hernando Barragan
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ Modified 24 November 2006 by David A. Mellis
+ Modified 1 August 2010 by Mark Sproul
+*/
+
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include <stdio.h>
+
+#include "WConstants.h"
+#include "wiring_private.h"
+
+volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
+// volatile static voidFuncPtr twiIntFunc;
+
+void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
+ if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+ intFunc[interruptNum] = userFunc;
+
+ // Configure the interrupt mode (trigger on low input, any change, rising
+ // edge, or falling edge). The mode constants were chosen to correspond
+ // to the configuration bits in the hardware register, so we simply shift
+ // the mode into place.
+
+ // Enable the interrupt.
+
+ switch (interruptNum) {
+#if defined(EICRA) && defined(EICRB) && defined(EIMSK)
+ case 2:
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ EIMSK |= (1 << INT0);
+ break;
+ case 3:
+ EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ EIMSK |= (1 << INT1);
+ break;
+ case 4:
+ EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ EIMSK |= (1 << INT2);
+ break;
+ case 5:
+ EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30);
+ EIMSK |= (1 << INT3);
+ break;
+ case 0:
+ EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40);
+ EIMSK |= (1 << INT4);
+ break;
+ case 1:
+ EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50);
+ EIMSK |= (1 << INT5);
+ break;
+ case 6:
+ EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60);
+ EIMSK |= (1 << INT6);
+ break;
+ case 7:
+ EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
+ EIMSK |= (1 << INT7);
+ break;
+#else
+ case 0:
+ #if defined(EICRA) && defined(ISC00) && defined(EIMSK)
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ EIMSK |= (1 << INT0);
+ #elif defined(MCUCR) && defined(ISC00) && defined(GICR)
+ MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ GICR |= (1 << INT0);
+ #elif defined(MCUCR) && defined(ISC00) && defined(GIMSK)
+ MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ GIMSK |= (1 << INT0);
+ #else
+ #error attachInterrupt not finished for this CPU (case 0)
+ #endif
+ break;
+
+ case 1:
+ #if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK)
+ EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ EIMSK |= (1 << INT1);
+ #elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR)
+ MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ GICR |= (1 << INT1);
+ #elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK)
+ MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ GIMSK |= (1 << INT1);
+ #else
+ #warning attachInterrupt may need some more work for this cpu (case 1)
+ #endif
+ break;
+#endif
+ }
+ }
+}
+
+void detachInterrupt(uint8_t interruptNum) {
+ if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+ // Disable the interrupt. (We can't assume that interruptNum is equal
+ // to the number of the EIMSK bit to clear, as this isn't true on the
+ // ATmega8. There, INT0 is 6 and INT1 is 7.)
+ switch (interruptNum) {
+#if defined(EICRA) && defined(EICRB) && defined(EIMSK)
+ case 2:
+ EIMSK &= ~(1 << INT0);
+ break;
+ case 3:
+ EIMSK &= ~(1 << INT1);
+ break;
+ case 4:
+ EIMSK &= ~(1 << INT2);
+ break;
+ case 5:
+ EIMSK &= ~(1 << INT3);
+ break;
+ case 0:
+ EIMSK &= ~(1 << INT4);
+ break;
+ case 1:
+ EIMSK &= ~(1 << INT5);
+ break;
+ case 6:
+ EIMSK &= ~(1 << INT6);
+ break;
+ case 7:
+ EIMSK &= ~(1 << INT7);
+ break;
+#else
+ case 0:
+ #if defined(EIMSK) && defined(INT0)
+ EIMSK &= ~(1 << INT0);
+ #elif defined(GICR) && defined(ISC00)
+ GICR &= ~(1 << INT0); // atmega32
+ #elif defined(GIMSK) && defined(INT0)
+ GIMSK &= ~(1 << INT0);
+ #else
+ #error detachInterrupt not finished for this cpu
+ #endif
+ break;
+
+ case 1:
+ #if defined(EIMSK) && defined(INT1)
+ EIMSK &= ~(1 << INT1);
+ #elif defined(GICR) && defined(INT1)
+ GICR &= ~(1 << INT1); // atmega32
+ #elif defined(GIMSK) && defined(INT1)
+ GIMSK &= ~(1 << INT1);
+ #else
+ #warning detachInterrupt may need some more work for this cpu (case 1)
+ #endif
+ break;
+#endif
+ }
+
+ intFunc[interruptNum] = 0;
+ }
+}
+
+/*
+void attachInterruptTwi(void (*userFunc)(void) ) {
+ twiIntFunc = userFunc;
+}
+*/
+
+#if defined(EICRA) && defined(EICRB)
+
+SIGNAL(INT0_vect) {
+ if(intFunc[EXTERNAL_INT_2])
+ intFunc[EXTERNAL_INT_2]();
+}
+
+SIGNAL(INT1_vect) {
+ if(intFunc[EXTERNAL_INT_3])
+ intFunc[EXTERNAL_INT_3]();
+}
+
+SIGNAL(INT2_vect) {
+ if(intFunc[EXTERNAL_INT_4])
+ intFunc[EXTERNAL_INT_4]();
+}
+
+SIGNAL(INT3_vect) {
+ if(intFunc[EXTERNAL_INT_5])
+ intFunc[EXTERNAL_INT_5]();
+}
+
+SIGNAL(INT4_vect) {
+ if(intFunc[EXTERNAL_INT_0])
+ intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT5_vect) {
+ if(intFunc[EXTERNAL_INT_1])
+ intFunc[EXTERNAL_INT_1]();
+}
+
+SIGNAL(INT6_vect) {
+ if(intFunc[EXTERNAL_INT_6])
+ intFunc[EXTERNAL_INT_6]();
+}
+
+SIGNAL(INT7_vect) {
+ if(intFunc[EXTERNAL_INT_7])
+ intFunc[EXTERNAL_INT_7]();
+}
+
+#else
+
+SIGNAL(INT0_vect) {
+ if(intFunc[EXTERNAL_INT_0])
+ intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT1_vect) {
+ if(intFunc[EXTERNAL_INT_1])
+ intFunc[EXTERNAL_INT_1]();
+}
+
+#endif
+
+/*
+SIGNAL(SIG_2WIRE_SERIAL) {
+ if(twiIntFunc)
+ twiIntFunc();
+}
+*/
+
diff --git a/hardware/arduino/cores/arduino/WMath.cpp b/hardware/arduino/cores/arduino/WMath.cpp
new file mode 100644
index 0000000..2120c4c
--- /dev/null
+++ b/hardware/arduino/cores/arduino/WMath.cpp
@@ -0,0 +1,60 @@
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+ Part of the Wiring project - http://wiring.org.co
+ Copyright (c) 2004-06 Hernando Barragan
+ Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id$
+*/
+
+extern "C" {
+ #include "stdlib.h"
+}
+
+void randomSeed(unsigned int seed)
+{
+ if (seed != 0) {
+ srandom(seed);
+ }
+}
+
+long random(long howbig)
+{
+ if (howbig == 0) {
+ return 0;
+ }
+ return random() % howbig;
+}
+
+long random(long howsmall, long howbig)
+{
+ if (howsmall >= howbig) {
+ return howsmall;
+ }
+ long diff = howbig - howsmall;
+ return random(diff) + howsmall;
+}
+
+long map(long x, long in_min, long in_max, long out_min, long out_max)
+{
+ return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+}
+
+unsigned int makeWord(unsigned int w) { return w; }
+unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; }
\ No newline at end of file
diff --git a/hardware/arduino/cores/arduino/WProgram.h b/hardware/arduino/cores/arduino/WProgram.h
new file mode 100755
index 0000000..f73e760
--- /dev/null
+++ b/hardware/arduino/cores/arduino/WProgram.h
@@ -0,0 +1,63 @@
+#ifndef WProgram_h
+#define WProgram_h
+
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+
+#include <avr/interrupt.h>
+
+#include "wiring.h"
+
+#ifdef __cplusplus
+#include "WCharacter.h"
+#include "WString.h"
+#include "HardwareSerial.h"
+
+uint16_t makeWord(uint16_t w);
+uint16_t makeWord(byte h, byte l);
+
+#define word(...) makeWord(__VA_ARGS__)
+
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
+
+void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
+void noTone(uint8_t _pin);
+
+// WMath prototypes
+long random(long);
+long random(long, long);
+void randomSeed(unsigned int);
+long map(long, long, long, long, long);
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+const static uint8_t A0 = 54;
+const static uint8_t A1 = 55;
+const static uint8_t A2 = 56;
+const static uint8_t A3 = 57;
+const static uint8_t A4 = 58;
+const static uint8_t A5 = 59;
+const static uint8_t A6 = 60;
+const static uint8_t A7 = 61;
+const static uint8_t A8 = 62;
+const static uint8_t A9 = 63;
+const static uint8_t A10 = 64;
+const static uint8_t A11 = 65;
+const static uint8_t A12 = 66;
+const static uint8_t A13 = 67;
+const static uint8_t A14 = 68;
+const static uint8_t A15 = 69;
+#else
+const static uint8_t A0 = 14;
+const static uint8_t A1 = 15;
+const static uint8_t A2 = 16;
+const static uint8_t A3 = 17;
+const static uint8_t A4 = 18;
+const static uint8_t A5 = 19;
+const static uint8_t A6 = 20;
+const static uint8_t A7 = 21;
+#endif
+
+#endif
+
+#endif
\ No newline at end of file
diff --git a/hardware/arduino/cores/arduino/WString.cpp b/hardware/arduino/cores/arduino/WString.cpp
new file mode 100644
index 0000000..db5a441
--- /dev/null
+++ b/hardware/arduino/cores/arduino/WString.cpp
@@ -0,0 +1,443 @@
+/*
+ WString.cpp - String library for Wiring & Arduino
+ Copyright (c) 2009-10 Hernando Barragan. All rights reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <stdlib.h>
+#include "WProgram.h"
+#include "WString.h"
+
+
+String::String( const char *value )
+{
+ if ( value == NULL )
+ value = "";
+ getBuffer( _length = strlen( value ) );
+ if ( _buffer != NULL )
+ strcpy( _buffer, value );
+}
+
+String::String( const String &value )
+{
+ getBuffer( _length = value._length );
+ if ( _buffer != NULL )
+ strcpy( _buffer, value._buffer );
+}
+
+String::String( const char value )
+{
+ _length = 1;
+ getBuffer(1);
+ if ( _buffer != NULL ) {
+ _buffer[0] = value;
+ _buffer[1] = 0;
+ }
+}
+
+String::String( const unsigned char value )
+{
+ _length = 1;
+ getBuffer(1);
+ if ( _buffer != NULL) {
+ _buffer[0] = value;
+ _buffer[1] = 0;
+ }
+}
+
+String::String( const int value, const int base )
+{
+ char buf[33];
+ itoa((signed long)value, buf, base);
+ getBuffer( _length = strlen(buf) );
+ if ( _buffer != NULL )
+ strcpy( _buffer, buf );
+}
+
+String::String( const unsigned int value, const int base )
+{
+ char buf[33];
+ ultoa((unsigned long)value, buf, base);
+ getBuffer( _length = strlen(buf) );
+ if ( _buffer != NULL )
+ strcpy( _buffer, buf );
+}
+
+String::String( const long value, const int base )
+{
+ char buf[33];
+ ltoa(value, buf, base);
+ getBuffer( _length = strlen(buf) );
+ if ( _buffer != NULL )
+ strcpy( _buffer, buf );
+}
+
+String::String( const unsigned long value, const int base )
+{
+ char buf[33];
+ ultoa(value, buf, 10);
+ getBuffer( _length = strlen(buf) );
+ if ( _buffer != NULL )
+ strcpy( _buffer, buf );
+}
+
+char String::charAt( unsigned int loc ) const
+{
+ return operator[]( loc );
+}
+
+void String::setCharAt( unsigned int loc, const char aChar )
+{
+ if(_buffer == NULL) return;
+ if(_length > loc) {
+ _buffer[loc] = aChar;
+ }
+}
+
+int String::compareTo( const String &s2 ) const
+{
+ return strcmp( _buffer, s2._buffer );
+}
+
+const String & String::concat( const String &s2 )
+{
+ return (*this) += s2;
+}
+
+const String & String::operator=( const String &rhs )
+{
+ if ( this == &rhs )
+ return *this;
+
+ if ( rhs._length > _length )
+ {
+ free(_buffer);
+ getBuffer( rhs._length );
+ }
+
+ if ( _buffer != NULL ) {
+ _length = rhs._length;
+ strcpy( _buffer, rhs._buffer );
+ }
+ return *this;
+}
+
+//const String & String::operator+=( const char aChar )
+//{
+// if ( _length == _capacity )
+// doubleBuffer();
+//
+// _buffer[ _length++ ] = aChar;
+// _buffer[ _length ] = '\0';
+// return *this;
+//}
+
+const String & String::operator+=( const String &other )
+{
+ _length += other._length;
+ if ( _length > _capacity )
+ {
+ char *temp = (char *)realloc(_buffer, _length + 1);
+ if ( temp != NULL ) {
+ _buffer = temp;
+ _capacity = _length;
+ } else {
+ _length -= other._length;
+ return *this;
+ }
+ }
+ strcat( _buffer, other._buffer );
+ return *this;
+}
+
+
+int String::operator==( const String &rhs ) const
+{
+ return ( _length == rhs._length && strcmp( _buffer, rhs._buffer ) == 0 );
+}
+
+int String::operator!=( const String &rhs ) const
+{
+ return ( _length != rhs.length() || strcmp( _buffer, rhs._buffer ) != 0 );
+}
+
+int String::operator<( const String &rhs ) const
+{
+ return strcmp( _buffer, rhs._buffer ) < 0;
+}
+
+int String::operator>( const String &rhs ) const
+{
+ return strcmp( _buffer, rhs._buffer ) > 0;
+}
+
+int String::operator<=( const String &rhs ) const
+{
+ return strcmp( _buffer, rhs._buffer ) <= 0;
+}
+
+int String::operator>=( const String & rhs ) const
+{
+ return strcmp( _buffer, rhs._buffer ) >= 0;
+}
+
+char & String::operator[]( unsigned int index )
+{
+ static char dummy_writable_char;
+ if (index >= _length || !_buffer) {
+ dummy_writable_char = 0;
+ return dummy_writable_char;
+ }
+ return _buffer[ index ];
+}
+
+char String::operator[]( unsigned int index ) const
+{
+ // need to check for valid index, to do later
+ return _buffer[ index ];
+}
+
+boolean String::endsWith( const String &s2 ) const
+{
+ if ( _length < s2._length )
+ return 0;
+
+ return strcmp( &_buffer[ _length - s2._length], s2._buffer ) == 0;
+}
+
+boolean String::equals( const String &s2 ) const
+{
+ return ( _length == s2._length && strcmp( _buffer,s2._buffer ) == 0 );
+}
+
+boolean String::equalsIgnoreCase( const String &s2 ) const
+{
+ if ( this == &s2 )
+ return true; //1;
+ else if ( _length != s2._length )
+ return false; //0;
+
+ return strcmp(toLowerCase()._buffer, s2.toLowerCase()._buffer) == 0;
+}
+
+String String::replace( char findChar, char replaceChar )
+{
+ if ( _buffer == NULL ) return *this;
+ String theReturn = _buffer;
+ char* temp = theReturn._buffer;
+ while( (temp = strchr( temp, findChar )) != 0 )
+ *temp = replaceChar;
+
+ return theReturn;
+}
+
+String String::replace( const String& match, const String& replace )
+{
+ if ( _buffer == NULL ) return *this;
+ String temp = _buffer, newString;
+
+ int loc;
+ while ( (loc = temp.indexOf( match )) != -1 )
+ {
+ newString += temp.substring( 0, loc );
+ newString += replace;
+ temp = temp.substring( loc + match._length );
+ }
+ newString += temp;
+ return newString;
+}
+
+int String::indexOf( char temp ) const
+{
+ return indexOf( temp, 0 );
+}
+
+int String::indexOf( char ch, unsigned int fromIndex ) const
+{
+ if ( fromIndex >= _length )
+ return -1;
+
+ const char* temp = strchr( &_buffer[fromIndex], ch );
+ if ( temp == NULL )
+ return -1;
+
+ return temp - _buffer;
+}
+
+int String::indexOf( const String &s2 ) const
+{
+ return indexOf( s2, 0 );
+}
+
+int String::indexOf( const String &s2, unsigned int fromIndex ) const
+{
+ if ( fromIndex >= _length )
+ return -1;
+
+ const char *theFind = strstr( &_buffer[ fromIndex ], s2._buffer );
+
+ if ( theFind == NULL )
+ return -1;
+
+ return theFind - _buffer; // pointer subtraction
+}
+
+int String::lastIndexOf( char theChar ) const
+{
+ return lastIndexOf( theChar, _length - 1 );
+}
+
+int String::lastIndexOf( char ch, unsigned int fromIndex ) const
+{
+ if ( fromIndex >= _length )
+ return -1;
+
+ char tempchar = _buffer[fromIndex + 1];
+ _buffer[fromIndex + 1] = '\0';
+ char* temp = strrchr( _buffer, ch );
+ _buffer[fromIndex + 1] = tempchar;
+
+ if ( temp == NULL )
+ return -1;
+
+ return temp - _buffer;
+}
+
+int String::lastIndexOf( const String &s2 ) const
+{
+ return lastIndexOf( s2, _length - s2._length );
+}
+
+int String::lastIndexOf( const String &s2, unsigned int fromIndex ) const
+{
+ // check for empty strings
+ if ( s2._length == 0 || s2._length - 1 > fromIndex || fromIndex >= _length )
+ return -1;
+
+ // matching first character
+ char temp = s2[ 0 ];
+
+ for ( int i = fromIndex; i >= 0; i-- )
+ {
+ if ( _buffer[ i ] == temp && (*this).substring( i, i + s2._length ).equals( s2 ) )
+ return i;
+ }
+ return -1;
+}
+
+boolean String::startsWith( const String &s2 ) const
+{
+ if ( _length < s2._length )
+ return 0;
+
+ return startsWith( s2, 0 );
+}
+
+boolean String::startsWith( const String &s2, unsigned int offset ) const
+{
+ if ( offset > _length - s2._length )
+ return 0;
+
+ return strncmp( &_buffer[offset], s2._buffer, s2._length ) == 0;
+}
+
+String String::substring( unsigned int left ) const
+{
+ return substring( left, _length );
+}
+
+String String::substring( unsigned int left, unsigned int right ) const
+{
+ if ( left > right )
+ {
+ int temp = right;
+ right = left;
+ left = temp;
+ }
+
+ if ( right > _length )
+ {
+ right = _length;
+ }
+
+ char temp = _buffer[ right ]; // save the replaced character
+ _buffer[ right ] = '\0';
+ String outPut = ( _buffer + left ); // pointer arithmetic
+ _buffer[ right ] = temp; //restore character
+ return outPut;
+}
+
+String String::toLowerCase() const
+{
+ String temp = _buffer;
+
+ for ( unsigned int i = 0; i < _length; i++ )
+ temp._buffer[ i ] = (char)tolower( temp._buffer[ i ] );
+ return temp;
+}
+
+String String::toUpperCase() const
+{
+ String temp = _buffer;
+
+ for ( unsigned int i = 0; i < _length; i++ )
+ temp._buffer[ i ] = (char)toupper( temp._buffer[ i ] );
+ return temp;
+}
+
+String String::trim() const
+{
+ if ( _buffer == NULL ) return *this;
+ String temp = _buffer;
+ unsigned int i,j;
+
+ for ( i = 0; i < _length; i++ )
+ {
+ if ( !isspace(_buffer[i]) )
+ break;
+ }
+
+ for ( j = temp._length - 1; j > i; j-- )
+ {
+ if ( !isspace(_buffer[j]) )
+ break;
+ }
+
+ return temp.substring( i, j + 1);
+}
+
+void String::getBytes(unsigned char *buf, unsigned int bufsize)
+{
+ if (!bufsize || !buf) return;
+ unsigned int len = bufsize - 1;
+ if (len > _length) len = _length;
+ strncpy((char *)buf, _buffer, len);
+ buf[len] = 0;
+}
+
+void String::toCharArray(char *buf, unsigned int bufsize)
+{
+ if (!bufsize || !buf) return;
+ unsigned int len = bufsize - 1;
+ if (len > _length) len = _length;
+ strncpy(buf, _buffer, len);
+ buf[len] = 0;
+}
+
+
+long String::toInt() {
+ return atol(_buffer);
+}
diff --git a/hardware/arduino/cores/arduino/WString.h b/hardware/arduino/cores/arduino/WString.h
new file mode 100644
index 0000000..cadddb9
--- /dev/null
+++ b/hardware/arduino/cores/arduino/WString.h
@@ -0,0 +1,112 @@
+/*
+ WString.h - String library for Wiring & Arduino
+ Copyright (c) 2009-10 Hernando Barragan. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef String_h
+#define String_h
+
+//#include "WProgram.h"
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+
+class String
+{
+ public:
+ // constructors
+ String( const char *value = "" );
+ String( const String &value );
+ String( const char );
+ String( const unsigned char );
+ String( const int, const int base=10);
+ String( const unsigned int, const int base=10 );
+ String( const long, const int base=10 );
+ String( const unsigned long, const int base=10 );
+ ~String() { free(_buffer); _length = _capacity = 0;} //added _length = _capacity = 0;
+
+ // operators
+ const String & operator = ( const String &rhs );
+ const String & operator +=( const String &rhs );
+ //const String & operator +=( const char );
+ int operator ==( const String &rhs ) const;
+ int operator !=( const String &rhs ) const;
+ int operator < ( const String &rhs ) const;
+ int operator > ( const String &rhs ) const;
+ int operator <=( const String &rhs ) const;
+ int operator >=( const String &rhs ) const;
+ char operator []( unsigned int index ) const;
+ char& operator []( unsigned int index );
+ //operator const char *() const { return _buffer; }
+
+ // general methods
+ char charAt( unsigned int index ) const;
+ int compareTo( const String &anotherString ) const;
+ unsigned char endsWith( const String &suffix ) const;
+ unsigned char equals( const String &anObject ) const;
+ unsigned char equalsIgnoreCase( const String &anotherString ) const;
+ int indexOf( char ch ) const;
+ int indexOf( char ch, unsigned int fromIndex ) const;
+ int indexOf( const String &str ) const;
+ int indexOf( const String &str, unsigned int fromIndex ) const;
+ int lastIndexOf( char ch ) const;
+ int lastIndexOf( char ch, unsigned int fromIndex ) const;
+ int lastIndexOf( const String &str ) const;
+ int lastIndexOf( const String &str, unsigned int fromIndex ) const;
+ const unsigned int length( ) const { return _length; }
+ void setCharAt(unsigned int index, const char ch);
+ unsigned char startsWith( const String &prefix ) const;
+ unsigned char startsWith( const String &prefix, unsigned int toffset ) const;
+ String substring( unsigned int beginIndex ) const;
+ String substring( unsigned int beginIndex, unsigned int endIndex ) const;
+ String toLowerCase( ) const;
+ String toUpperCase( ) const;
+ String trim( ) const;
+ void getBytes(unsigned char *buf, unsigned int bufsize);
+ void toCharArray(char *buf, unsigned int bufsize);
+ long toInt( );
+ const String& concat( const String &str );
+ String replace( char oldChar, char newChar );
+ String replace( const String& match, const String& replace );
+ friend String operator + ( String lhs, const String &rhs );
+
+ protected:
+ char *_buffer; // the actual char array
+ unsigned int _capacity; // the array length minus one (for the '\0')
+ unsigned int _length; // the String length (not counting the '\0')
+
+ void getBuffer(unsigned int maxStrLen);
+
+ private:
+
+};
+
+// allocate buffer space
+inline void String::getBuffer(unsigned int maxStrLen)
+{
+ _capacity = maxStrLen;
+ _buffer = (char *) malloc(_capacity + 1);
+ if (_buffer == NULL) _length = _capacity = 0;
+}
+
+inline String operator+( String lhs, const String &rhs )
+{
+ return lhs += rhs;
+}
+
+
+#endif
diff --git a/hardware/arduino/cores/arduino/binary.h b/hardware/arduino/cores/arduino/binary.h
new file mode 100644
index 0000000..af14980
--- /dev/null
+++ b/hardware/arduino/cores/arduino/binary.h
@@ -0,0 +1,515 @@
+#ifndef Binary_h
+#define Binary_h
+
+#define B0 0
+#define B00 0
+#define B000 0
+#define B0000 0
+#define B00000 0
+#define B000000 0
+#define B0000000 0
+#define B00000000 0
+#define B1 1
+#define B01 1
+#define B001 1
+#define B0001 1
+#define B00001 1
+#define B000001 1
+#define B0000001 1
+#define B00000001 1
+#define B10 2
+#define B010 2
+#define B0010 2
+#define B00010 2
+#define B000010 2
+#define B0000010 2
+#define B00000010 2
+#define B11 3
+#define B011 3
+#define B0011 3
+#define B00011 3
+#define B000011 3
+#define B0000011 3
+#define B00000011 3
+#define B100 4
+#define B0100 4
+#define B00100 4
+#define B000100 4
+#define B0000100 4
+#define B00000100 4
+#define B101 5
+#define B0101 5
+#define B00101 5
+#define B000101 5
+#define B0000101 5
+#define B00000101 5
+#define B110 6
+#define B0110 6
+#define B00110 6
+#define B000110 6
+#define B0000110 6
+#define B00000110 6
+#define B111 7
+#define B0111 7
+#define B00111 7
+#define B000111 7
+#define B0000111 7
+#define B00000111 7
+#define B1000 8
+#define B01000 8
+#define B001000 8
+#define B0001000 8
+#define B00001000 8
+#define B1001 9
+#define B01001 9
+#define B001001 9
+#define B0001001 9
+#define B00001001 9
+#define B1010 10
+#define B01010 10
+#define B001010 10
+#define B0001010 10
+#define B00001010 10
+#define B1011 11
+#define B01011 11
+#define B001011 11
+#define B0001011 11
+#define B00001011 11
+#define B1100 12
+#define B01100 12
+#define B001100 12
+#define B0001100 12
+#define B00001100 12
+#define B1101 13
+#define B01101 13
+#define B001101 13
+#define B0001101 13
+#define B00001101 13
+#define B1110 14
+#define B01110 14
+#define B001110 14
+#define B0001110 14
+#define B00001110 14
+#define B1111 15
+#define B01111 15
+#define B001111 15
+#define B0001111 15
+#define B00001111 15
+#define B10000 16
+#define B010000 16
+#define B0010000 16
+#define B00010000 16
+#define B10001 17
+#define B010001 17
+#define B0010001 17
+#define B00010001 17
+#define B10010 18
+#define B010010 18
+#define B0010010 18
+#define B00010010 18
+#define B10011 19
+#define B010011 19
+#define B0010011 19
+#define B00010011 19
+#define B10100 20
+#define B010100 20
+#define B0010100 20
+#define B00010100 20
+#define B10101 21
+#define B010101 21
+#define B0010101 21
+#define B00010101 21
+#define B10110 22
+#define B010110 22
+#define B0010110 22
+#define B00010110 22
+#define B10111 23
+#define B010111 23
+#define B0010111 23
+#define B00010111 23
+#define B11000 24
+#define B011000 24
+#define B0011000 24
+#define B00011000 24
+#define B11001 25
+#define B011001 25
+#define B0011001 25
+#define B00011001 25
+#define B11010 26
+#define B011010 26
+#define B0011010 26
+#define B00011010 26
+#define B11011 27
+#define B011011 27
+#define B0011011 27
+#define B00011011 27
+#define B11100 28
+#define B011100 28
+#define B0011100 28
+#define B00011100 28
+#define B11101 29
+#define B011101 29
+#define B0011101 29
+#define B00011101 29
+#define B11110 30
+#define B011110 30
+#define B0011110 30
+#define B00011110 30
+#define B11111 31
+#define B011111 31
+#define B0011111 31
+#define B00011111 31
+#define B100000 32
+#define B0100000 32
+#define B00100000 32
+#define B100001 33
+#define B0100001 33
+#define B00100001 33
+#define B100010 34
+#define B0100010 34
+#define B00100010 34
+#define B100011 35
+#define B0100011 35
+#define B00100011 35
+#define B100100 36
+#define B0100100 36
+#define B00100100 36
+#define B100101 37
+#define B0100101 37
+#define B00100101 37
+#define B100110 38
+#define B0100110 38
+#define B00100110 38
+#define B100111 39
+#define B0100111 39
+#define B00100111 39
+#define B101000 40
+#define B0101000 40
+#define B00101000 40
+#define B101001 41
+#define B0101001 41
+#define B00101001 41
+#define B101010 42
+#define B0101010 42
+#define B00101010 42
+#define B101011 43
+#define B0101011 43
+#define B00101011 43
+#define B101100 44
+#define B0101100 44
+#define B00101100 44
+#define B101101 45
+#define B0101101 45
+#define B00101101 45
+#define B101110 46
+#define B0101110 46
+#define B00101110 46
+#define B101111 47
+#define B0101111 47
+#define B00101111 47
+#define B110000 48
+#define B0110000 48
+#define B00110000 48
+#define B110001 49
+#define B0110001 49
+#define B00110001 49
+#define B110010 50
+#define B0110010 50
+#define B00110010 50
+#define B110011 51
+#define B0110011 51
+#define B00110011 51
+#define B110100 52
+#define B0110100 52
+#define B00110100 52
+#define B110101 53
+#define B0110101 53
+#define B00110101 53
+#define B110110 54
+#define B0110110 54
+#define B00110110 54
+#define B110111 55
+#define B0110111 55
+#define B00110111 55
+#define B111000 56
+#define B0111000 56
+#define B00111000 56
+#define B111001 57
+#define B0111001 57
+#define B00111001 57
+#define B111010 58
+#define B0111010 58
+#define B00111010 58
+#define B111011 59
+#define B0111011 59
+#define B00111011 59
+#define B111100 60
+#define B0111100 60
+#define B00111100 60
+#define B111101 61
+#define B0111101 61
+#define B00111101 61
+#define B111110 62
+#define B0111110 62
+#define B00111110 62
+#define B111111 63
+#define B0111111 63
+#define B00111111 63
+#define B1000000 64
+#define B01000000 64
+#define B1000001 65
+#define B01000001 65
+#define B1000010 66
+#define B01000010 66
+#define B1000011 67
+#define B01000011 67
+#define B1000100 68
+#define B01000100 68
+#define B1000101 69
+#define B01000101 69
+#define B1000110 70
+#define B01000110 70
+#define B1000111 71
+#define B01000111 71
+#define B1001000 72
+#define B01001000 72
+#define B1001001 73
+#define B01001001 73
+#define B1001010 74
+#define B01001010 74
+#define B1001011 75
+#define B01001011 75
+#define B1001100 76
+#define B01001100 76
+#define B1001101 77
+#define B01001101 77
+#define B1001110 78
+#define B01001110 78
+#define B1001111 79
+#define B01001111 79
+#define B1010000 80
+#define B01010000 80
+#define B1010001 81
+#define B01010001 81
+#define B1010010 82
+#define B01010010 82
+#define B1010011 83
+#define B01010011 83
+#define B1010100 84
+#define B01010100 84
+#define B1010101 85
+#define B01010101 85
+#define B1010110 86
+#define B01010110 86
+#define B1010111 87
+#define B01010111 87
+#define B1011000 88
+#define B01011000 88
+#define B1011001 89
+#define B01011001 89
+#define B1011010 90
+#define B01011010 90
+#define B1011011 91
+#define B01011011 91
+#define B1011100 92
+#define B01011100 92
+#define B1011101 93
+#define B01011101 93
+#define B1011110 94
+#define B01011110 94
+#define B1011111 95
+#define B01011111 95
+#define B1100000 96
+#define B01100000 96
+#define B1100001 97
+#define B01100001 97
+#define B1100010 98
+#define B01100010 98
+#define B1100011 99
+#define B01100011 99
+#define B1100100 100
+#define B01100100 100
+#define B1100101 101
+#define B01100101 101
+#define B1100110 102
+#define B01100110 102
+#define B1100111 103
+#define B01100111 103
+#define B1101000 104
+#define B01101000 104
+#define B1101001 105
+#define B01101001 105
+#define B1101010 106
+#define B01101010 106
+#define B1101011 107
+#define B01101011 107
+#define B1101100 108
+#define B01101100 108
+#define B1101101 109
+#define B01101101 109
+#define B1101110 110
+#define B01101110 110
+#define B1101111 111
+#define B01101111 111
+#define B1110000 112
+#define B01110000 112
+#define B1110001 113
+#define B01110001 113
+#define B1110010 114
+#define B01110010 114
+#define B1110011 115
+#define B01110011 115
+#define B1110100 116
+#define B01110100 116
+#define B1110101 117
+#define B01110101 117
+#define B1110110 118
+#define B01110110 118
+#define B1110111 119
+#define B01110111 119
+#define B1111000 120
+#define B01111000 120
+#define B1111001 121
+#define B01111001 121
+#define B1111010 122
+#define B01111010 122
+#define B1111011 123
+#define B01111011 123
+#define B1111100 124
+#define B01111100 124
+#define B1111101 125
+#define B01111101 125
+#define B1111110 126
+#define B01111110 126
+#define B1111111 127
+#define B01111111 127
+#define B10000000 128
+#define B10000001 129
+#define B10000010 130
+#define B10000011 131
+#define B10000100 132
+#define B10000101 133
+#define B10000110 134
+#define B10000111 135
+#define B10001000 136
+#define B10001001 137
+#define B10001010 138
+#define B10001011 139
+#define B10001100 140
+#define B10001101 141
+#define B10001110 142
+#define B10001111 143
+#define B10010000 144
+#define B10010001 145
+#define B10010010 146
+#define B10010011 147
+#define B10010100 148
+#define B10010101 149
+#define B10010110 150
+#define B10010111 151
+#define B10011000 152
+#define B10011001 153
+#define B10011010 154
+#define B10011011 155
+#define B10011100 156
+#define B10011101 157
+#define B10011110 158
+#define B10011111 159
+#define B10100000 160
+#define B10100001 161
+#define B10100010 162
+#define B10100011 163
+#define B10100100 164
+#define B10100101 165
+#define B10100110 166
+#define B10100111 167
+#define B10101000 168
+#define B10101001 169
+#define B10101010 170
+#define B10101011 171
+#define B10101100 172
+#define B10101101 173
+#define B10101110 174
+#define B10101111 175
+#define B10110000 176
+#define B10110001 177
+#define B10110010 178
+#define B10110011 179
+#define B10110100 180
+#define B10110101 181
+#define B10110110 182
+#define B10110111 183
+#define B10111000 184
+#define B10111001 185
+#define B10111010 186
+#define B10111011 187
+#define B10111100 188
+#define B10111101 189
+#define B10111110 190
+#define B10111111 191
+#define B11000000 192
+#define B11000001 193
+#define B11000010 194
+#define B11000011 195
+#define B11000100 196
+#define B11000101 197
+#define B11000110 198
+#define B11000111 199
+#define B11001000 200
+#define B11001001 201
+#define B11001010 202
+#define B11001011 203
+#define B11001100 204
+#define B11001101 205
+#define B11001110 206
+#define B11001111 207
+#define B11010000 208
+#define B11010001 209
+#define B11010010 210
+#define B11010011 211
+#define B11010100 212
+#define B11010101 213
+#define B11010110 214
+#define B11010111 215
+#define B11011000 216
+#define B11011001 217
+#define B11011010 218
+#define B11011011 219
+#define B11011100 220
+#define B11011101 221
+#define B11011110 222
+#define B11011111 223
+#define B11100000 224
+#define B11100001 225
+#define B11100010 226
+#define B11100011 227
+#define B11100100 228
+#define B11100101 229
+#define B11100110 230
+#define B11100111 231
+#define B11101000 232
+#define B11101001 233
+#define B11101010 234
+#define B11101011 235
+#define B11101100 236
+#define B11101101 237
+#define B11101110 238
+#define B11101111 239
+#define B11110000 240
+#define B11110001 241
+#define B11110010 242
+#define B11110011 243
+#define B11110100 244
+#define B11110101 245
+#define B11110110 246
+#define B11110111 247
+#define B11111000 248
+#define B11111001 249
+#define B11111010 250
+#define B11111011 251
+#define B11111100 252
+#define B11111101 253
+#define B11111110 254
+#define B11111111 255
+
+#endif
diff --git a/hardware/arduino/cores/arduino/main.cpp b/hardware/arduino/cores/arduino/main.cpp
new file mode 100755
index 0000000..cc6e81d
--- /dev/null
+++ b/hardware/arduino/cores/arduino/main.cpp
@@ -0,0 +1,14 @@
+#include <WProgram.h>
+
+int main(void)
+{
+ init();
+
+ setup();
+
+ for (;;)
+ loop();
+
+ return 0;
+}
+
diff --git a/hardware/arduino/cores/arduino/pins_arduino.c b/hardware/arduino/cores/arduino/pins_arduino.c
new file mode 100755
index 0000000..0c816e9
--- /dev/null
+++ b/hardware/arduino/cores/arduino/pins_arduino.c
@@ -0,0 +1,465 @@
+/*
+ pins_arduino.c - pin definitions for the Arduino board
+ Part of Arduino / Wiring Lite
+
+ Copyright (c) 2005 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id$
+*/
+
+#include <avr/io.h>
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM). Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA8 & 168 / ARDUINO
+//
+// +-\/-+
+// PC6 1| |28 PC5 (AI 5)
+// (D 0) PD0 2| |27 PC4 (AI 4)
+// (D 1) PD1 3| |26 PC3 (AI 3)
+// (D 2) PD2 4| |25 PC2 (AI 2)
+// PWM+ (D 3) PD3 5| |24 PC1 (AI 1)
+// (D 4) PD4 6| |23 PC0 (AI 0)
+// VCC 7| |22 GND
+// GND 8| |21 AREF
+// PB6 9| |20 AVCC
+// PB7 10| |19 PB5 (D 13)
+// PWM+ (D 5) PD5 11| |18 PB4 (D 12)
+// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM
+// (D 7) PD7 13| |16 PB2 (D 10) PWM
+// (D 8) PB0 14| |15 PB1 (D 9) PWM
+// +----+
+//
+// (PWM+ indicates the additional PWM pins on the ATmega168.)
+
+// ATMEL ATMEGA1280 / ARDUINO
+//
+// 0-7 PE0-PE7 works
+// 8-13 PB0-PB5 works
+// 14-21 PA0-PA7 works
+// 22-29 PH0-PH7 works
+// 30-35 PG5-PG0 works
+// 36-43 PC7-PC0 works
+// 44-51 PJ7-PJ0 works
+// 52-59 PL7-PL0 works
+// 60-67 PD7-PD0 works
+// A0-A7 PF0-PF7
+// A8-A15 PK0-PK7
+
+#define PA 1
+#define PB 2
+#define PC 3
+#define PD 4
+#define PE 5
+#define PF 6
+#define PG 7
+#define PH 8
+#define PJ 10
+#define PK 11
+#define PL 12
+
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+ NOT_A_PORT,
+ &DDRA,
+ &DDRB,
+ &DDRC,
+ &DDRD,
+ &DDRE,
+ &DDRF,
+ &DDRG,
+ &DDRH,
+ NOT_A_PORT,
+ &DDRJ,
+ &DDRK,
+ &DDRL,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+ NOT_A_PORT,
+ &PORTA,
+ &PORTB,
+ &PORTC,
+ &PORTD,
+ &PORTE,
+ &PORTF,
+ &PORTG,
+ &PORTH,
+ NOT_A_PORT,
+ &PORTJ,
+ &PORTK,
+ &PORTL,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+ NOT_A_PIN,
+ &PINA,
+ &PINB,
+ &PINC,
+ &PIND,
+ &PINE,
+ &PINF,
+ &PING,
+ &PINH,
+ NOT_A_PIN,
+ &PINJ,
+ &PINK,
+ &PINL,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+ // PORTLIST
+ // -------------------------------------------
+ PE , // PE 0 ** 0 ** USART0_RX
+ PE , // PE 1 ** 1 ** USART0_TX
+ PE , // PE 4 ** 2 ** PWM2
+ PE , // PE 5 ** 3 ** PWM3
+ PG , // PG 5 ** 4 ** PWM4
+ PE , // PE 3 ** 5 ** PWM5
+ PH , // PH 3 ** 6 ** PWM6
+ PH , // PH 4 ** 7 ** PWM7
+ PH , // PH 5 ** 8 ** PWM8
+ PH , // PH 6 ** 9 ** PWM9
+ PB , // PB 4 ** 10 ** PWM10
+ PB , // PB 5 ** 11 ** PWM11
+ PB , // PB 6 ** 12 ** PWM12
+ PB , // PB 7 ** 13 ** PWM13
+ PJ , // PJ 1 ** 14 ** USART3_TX
+ PJ , // PJ 0 ** 15 ** USART3_RX
+ PH , // PH 1 ** 16 ** USART2_TX
+ PH , // PH 0 ** 17 ** USART2_RX
+ PD , // PD 3 ** 18 ** USART1_TX
+ PD , // PD 2 ** 19 ** USART1_RX
+ PD , // PD 1 ** 20 ** I2C_SDA
+ PD , // PD 0 ** 21 ** I2C_SCL
+ PA , // PA 0 ** 22 ** D22
+ PA , // PA 1 ** 23 ** D23
+ PA , // PA 2 ** 24 ** D24
+ PA , // PA 3 ** 25 ** D25
+ PA , // PA 4 ** 26 ** D26
+ PA , // PA 5 ** 27 ** D27
+ PA , // PA 6 ** 28 ** D28
+ PA , // PA 7 ** 29 ** D29
+ PC , // PC 7 ** 30 ** D30
+ PC , // PC 6 ** 31 ** D31
+ PC , // PC 5 ** 32 ** D32
+ PC , // PC 4 ** 33 ** D33
+ PC , // PC 3 ** 34 ** D34
+ PC , // PC 2 ** 35 ** D35
+ PC , // PC 1 ** 36 ** D36
+ PC , // PC 0 ** 37 ** D37
+ PD , // PD 7 ** 38 ** D38
+ PG , // PG 2 ** 39 ** D39
+ PG , // PG 1 ** 40 ** D40
+ PG , // PG 0 ** 41 ** D41
+ PL , // PL 7 ** 42 ** D42
+ PL , // PL 6 ** 43 ** D43
+ PL , // PL 5 ** 44 ** D44
+ PL , // PL 4 ** 45 ** D45
+ PL , // PL 3 ** 46 ** D46
+ PL , // PL 2 ** 47 ** D47
+ PL , // PL 1 ** 48 ** D48
+ PL , // PL 0 ** 49 ** D49
+ PB , // PB 3 ** 50 ** SPI_MISO
+ PB , // PB 2 ** 51 ** SPI_MOSI
+ PB , // PB 1 ** 52 ** SPI_SCK
+ PB , // PB 0 ** 53 ** SPI_SS
+ PF , // PF 0 ** 54 ** A0
+ PF , // PF 1 ** 55 ** A1
+ PF , // PF 2 ** 56 ** A2
+ PF , // PF 3 ** 57 ** A3
+ PF , // PF 4 ** 58 ** A4
+ PF , // PF 5 ** 59 ** A5
+ PF , // PF 6 ** 60 ** A6
+ PF , // PF 7 ** 61 ** A7
+ PK , // PK 0 ** 62 ** A8
+ PK , // PK 1 ** 63 ** A9
+ PK , // PK 2 ** 64 ** A10
+ PK , // PK 3 ** 65 ** A11
+ PK , // PK 4 ** 66 ** A12
+ PK , // PK 5 ** 67 ** A13
+ PK , // PK 6 ** 68 ** A14
+ PK , // PK 7 ** 69 ** A15
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+ // PIN IN PORT
+ // -------------------------------------------
+ _BV( 0 ) , // PE 0 ** 0 ** USART0_RX
+ _BV( 1 ) , // PE 1 ** 1 ** USART0_TX
+ _BV( 4 ) , // PE 4 ** 2 ** PWM2
+ _BV( 5 ) , // PE 5 ** 3 ** PWM3
+ _BV( 5 ) , // PG 5 ** 4 ** PWM4
+ _BV( 3 ) , // PE 3 ** 5 ** PWM5
+ _BV( 3 ) , // PH 3 ** 6 ** PWM6
+ _BV( 4 ) , // PH 4 ** 7 ** PWM7
+ _BV( 5 ) , // PH 5 ** 8 ** PWM8
+ _BV( 6 ) , // PH 6 ** 9 ** PWM9
+ _BV( 4 ) , // PB 4 ** 10 ** PWM10
+ _BV( 5 ) , // PB 5 ** 11 ** PWM11
+ _BV( 6 ) , // PB 6 ** 12 ** PWM12
+ _BV( 7 ) , // PB 7 ** 13 ** PWM13
+ _BV( 1 ) , // PJ 1 ** 14 ** USART3_TX
+ _BV( 0 ) , // PJ 0 ** 15 ** USART3_RX
+ _BV( 1 ) , // PH 1 ** 16 ** USART2_TX
+ _BV( 0 ) , // PH 0 ** 17 ** USART2_RX
+ _BV( 3 ) , // PD 3 ** 18 ** USART1_TX
+ _BV( 2 ) , // PD 2 ** 19 ** USART1_RX
+ _BV( 1 ) , // PD 1 ** 20 ** I2C_SDA
+ _BV( 0 ) , // PD 0 ** 21 ** I2C_SCL
+ _BV( 0 ) , // PA 0 ** 22 ** D22
+ _BV( 1 ) , // PA 1 ** 23 ** D23
+ _BV( 2 ) , // PA 2 ** 24 ** D24
+ _BV( 3 ) , // PA 3 ** 25 ** D25
+ _BV( 4 ) , // PA 4 ** 26 ** D26
+ _BV( 5 ) , // PA 5 ** 27 ** D27
+ _BV( 6 ) , // PA 6 ** 28 ** D28
+ _BV( 7 ) , // PA 7 ** 29 ** D29
+ _BV( 7 ) , // PC 7 ** 30 ** D30
+ _BV( 6 ) , // PC 6 ** 31 ** D31
+ _BV( 5 ) , // PC 5 ** 32 ** D32
+ _BV( 4 ) , // PC 4 ** 33 ** D33
+ _BV( 3 ) , // PC 3 ** 34 ** D34
+ _BV( 2 ) , // PC 2 ** 35 ** D35
+ _BV( 1 ) , // PC 1 ** 36 ** D36
+ _BV( 0 ) , // PC 0 ** 37 ** D37
+ _BV( 7 ) , // PD 7 ** 38 ** D38
+ _BV( 2 ) , // PG 2 ** 39 ** D39
+ _BV( 1 ) , // PG 1 ** 40 ** D40
+ _BV( 0 ) , // PG 0 ** 41 ** D41
+ _BV( 7 ) , // PL 7 ** 42 ** D42
+ _BV( 6 ) , // PL 6 ** 43 ** D43
+ _BV( 5 ) , // PL 5 ** 44 ** D44
+ _BV( 4 ) , // PL 4 ** 45 ** D45
+ _BV( 3 ) , // PL 3 ** 46 ** D46
+ _BV( 2 ) , // PL 2 ** 47 ** D47
+ _BV( 1 ) , // PL 1 ** 48 ** D48
+ _BV( 0 ) , // PL 0 ** 49 ** D49
+ _BV( 3 ) , // PB 3 ** 50 ** SPI_MISO
+ _BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI
+ _BV( 1 ) , // PB 1 ** 52 ** SPI_SCK
+ _BV( 0 ) , // PB 0 ** 53 ** SPI_SS
+ _BV( 0 ) , // PF 0 ** 54 ** A0
+ _BV( 1 ) , // PF 1 ** 55 ** A1
+ _BV( 2 ) , // PF 2 ** 56 ** A2
+ _BV( 3 ) , // PF 3 ** 57 ** A3
+ _BV( 4 ) , // PF 4 ** 58 ** A4
+ _BV( 5 ) , // PF 5 ** 59 ** A5
+ _BV( 6 ) , // PF 6 ** 60 ** A6
+ _BV( 7 ) , // PF 7 ** 61 ** A7
+ _BV( 0 ) , // PK 0 ** 62 ** A8
+ _BV( 1 ) , // PK 1 ** 63 ** A9
+ _BV( 2 ) , // PK 2 ** 64 ** A10
+ _BV( 3 ) , // PK 3 ** 65 ** A11
+ _BV( 4 ) , // PK 4 ** 66 ** A12
+ _BV( 5 ) , // PK 5 ** 67 ** A13
+ _BV( 6 ) , // PK 6 ** 68 ** A14
+ _BV( 7 ) , // PK 7 ** 69 ** A15
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+ // TIMERS
+ // -------------------------------------------
+ NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX
+ NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX
+ TIMER3B , // PE 4 ** 2 ** PWM2
+ TIMER3C , // PE 5 ** 3 ** PWM3
+ TIMER0B , // PG 5 ** 4 ** PWM4
+ TIMER3A , // PE 3 ** 5 ** PWM5
+ TIMER4A , // PH 3 ** 6 ** PWM6
+ TIMER4B , // PH 4 ** 7 ** PWM7
+ TIMER4C , // PH 5 ** 8 ** PWM8
+ TIMER2B , // PH 6 ** 9 ** PWM9
+ TIMER2A , // PB 4 ** 10 ** PWM10
+ TIMER1A , // PB 5 ** 11 ** PWM11
+ TIMER1B , // PB 6 ** 12 ** PWM12
+ TIMER0A , // PB 7 ** 13 ** PWM13
+ NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX
+ NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX
+ NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX
+ NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX
+ NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX
+ NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX
+ NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA
+ NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL
+ NOT_ON_TIMER , // PA 0 ** 22 ** D22
+ NOT_ON_TIMER , // PA 1 ** 23 ** D23
+ NOT_ON_TIMER , // PA 2 ** 24 ** D24
+ NOT_ON_TIMER , // PA 3 ** 25 ** D25
+ NOT_ON_TIMER , // PA 4 ** 26 ** D26
+ NOT_ON_TIMER , // PA 5 ** 27 ** D27
+ NOT_ON_TIMER , // PA 6 ** 28 ** D28
+ NOT_ON_TIMER , // PA 7 ** 29 ** D29
+ NOT_ON_TIMER , // PC 7 ** 30 ** D30
+ NOT_ON_TIMER , // PC 6 ** 31 ** D31
+ NOT_ON_TIMER , // PC 5 ** 32 ** D32
+ NOT_ON_TIMER , // PC 4 ** 33 ** D33
+ NOT_ON_TIMER , // PC 3 ** 34 ** D34
+ NOT_ON_TIMER , // PC 2 ** 35 ** D35
+ NOT_ON_TIMER , // PC 1 ** 36 ** D36
+ NOT_ON_TIMER , // PC 0 ** 37 ** D37
+ NOT_ON_TIMER , // PD 7 ** 38 ** D38
+ NOT_ON_TIMER , // PG 2 ** 39 ** D39
+ NOT_ON_TIMER , // PG 1 ** 40 ** D40
+ NOT_ON_TIMER , // PG 0 ** 41 ** D41
+ NOT_ON_TIMER , // PL 7 ** 42 ** D42
+ NOT_ON_TIMER , // PL 6 ** 43 ** D43
+ TIMER5C , // PL 5 ** 44 ** D44
+ TIMER5B , // PL 4 ** 45 ** D45
+ TIMER5A , // PL 3 ** 46 ** D46
+ NOT_ON_TIMER , // PL 2 ** 47 ** D47
+ NOT_ON_TIMER , // PL 1 ** 48 ** D48
+ NOT_ON_TIMER , // PL 0 ** 49 ** D49
+ NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO
+ NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI
+ NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK
+ NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS
+ NOT_ON_TIMER , // PF 0 ** 54 ** A0
+ NOT_ON_TIMER , // PF 1 ** 55 ** A1
+ NOT_ON_TIMER , // PF 2 ** 56 ** A2
+ NOT_ON_TIMER , // PF 3 ** 57 ** A3
+ NOT_ON_TIMER , // PF 4 ** 58 ** A4
+ NOT_ON_TIMER , // PF 5 ** 59 ** A5
+ NOT_ON_TIMER , // PF 6 ** 60 ** A6
+ NOT_ON_TIMER , // PF 7 ** 61 ** A7
+ NOT_ON_TIMER , // PK 0 ** 62 ** A8
+ NOT_ON_TIMER , // PK 1 ** 63 ** A9
+ NOT_ON_TIMER , // PK 2 ** 64 ** A10
+ NOT_ON_TIMER , // PK 3 ** 65 ** A11
+ NOT_ON_TIMER , // PK 4 ** 66 ** A12
+ NOT_ON_TIMER , // PK 5 ** 67 ** A13
+ NOT_ON_TIMER , // PK 6 ** 68 ** A14
+ NOT_ON_TIMER , // PK 7 ** 69 ** A15
+};
+#else
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+ NOT_A_PORT,
+ NOT_A_PORT,
+ &DDRB,
+ &DDRC,
+ &DDRD,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+ NOT_A_PORT,
+ NOT_A_PORT,
+ &PORTB,
+ &PORTC,
+ &PORTD,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+ NOT_A_PORT,
+ NOT_A_PORT,
+ &PINB,
+ &PINC,
+ &PIND,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+ PD, /* 0 */
+ PD,
+ PD,
+ PD,
+ PD,
+ PD,
+ PD,
+ PD,
+ PB, /* 8 */
+ PB,
+ PB,
+ PB,
+ PB,
+ PB,
+ PC, /* 14 */
+ PC,
+ PC,
+ PC,
+ PC,
+ PC,
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+ _BV(0), /* 0, port D */
+ _BV(1),
+ _BV(2),
+ _BV(3),
+ _BV(4),
+ _BV(5),
+ _BV(6),
+ _BV(7),
+ _BV(0), /* 8, port B */
+ _BV(1),
+ _BV(2),
+ _BV(3),
+ _BV(4),
+ _BV(5),
+ _BV(0), /* 14, port C */
+ _BV(1),
+ _BV(2),
+ _BV(3),
+ _BV(4),
+ _BV(5),
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+ NOT_ON_TIMER, /* 0 - port D */
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ // on the ATmega168, digital pin 3 has hardware pwm
+#if defined(__AVR_ATmega8__)
+ NOT_ON_TIMER,
+#else
+ TIMER2B,
+#endif
+ NOT_ON_TIMER,
+ // on the ATmega168, digital pins 5 and 6 have hardware pwm
+#if defined(__AVR_ATmega8__)
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+#else
+ TIMER0B,
+ TIMER0A,
+#endif
+ NOT_ON_TIMER,
+ NOT_ON_TIMER, /* 8 - port B */
+ TIMER1A,
+ TIMER1B,
+#if defined(__AVR_ATmega8__)
+ TIMER2,
+#else
+ TIMER2A,
+#endif
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER, /* 14 - port C */
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+};
+#endif
diff --git a/hardware/arduino/cores/arduino/pins_arduino.h b/hardware/arduino/cores/arduino/pins_arduino.h
new file mode 100644
index 0000000..bc931c5
--- /dev/null
+++ b/hardware/arduino/cores/arduino/pins_arduino.h
@@ -0,0 +1,88 @@
+/*
+ pins_arduino.h - Pin definition functions for Arduino
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2007 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+#define NOT_A_PIN 0
+#define NOT_A_PORT 0
+
+#define NOT_ON_TIMER 0
+#define TIMER0A 1
+#define TIMER0B 2
+#define TIMER1A 3
+#define TIMER1B 4
+#define TIMER2 5
+#define TIMER2A 6
+#define TIMER2B 7
+
+#define TIMER3A 8
+#define TIMER3B 9
+#define TIMER3C 10
+#define TIMER4A 11
+#define TIMER4B 12
+#define TIMER4C 13
+#define TIMER5A 14
+#define TIMER5B 15
+#define TIMER5C 16
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+const static uint8_t SS = 53;
+const static uint8_t MOSI = 51;
+const static uint8_t MISO = 50;
+const static uint8_t SCK = 52;
+#else
+const static uint8_t SS = 10;
+const static uint8_t MOSI = 11;
+const static uint8_t MISO = 12;
+const static uint8_t SCK = 13;
+#endif
+
+// On the ATmega1280, the addresses of some of the port registers are
+// greater than 255, so we can't store them in uint8_t's.
+extern const uint16_t PROGMEM port_to_mode_PGM[];
+extern const uint16_t PROGMEM port_to_input_PGM[];
+extern const uint16_t PROGMEM port_to_output_PGM[];
+
+extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
+// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
+extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
+extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
+
+// Get the bit location within the hardware port of the given virtual pin.
+// This comes from the pins_*.c file for the active board configuration.
+//
+// These perform slightly better as macros compared to inline functions
+//
+#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
+#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
+#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
+#define analogInPinToBit(P) (P)
+#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )
+#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )
+#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )
+
+#endif
diff --git a/hardware/arduino/cores/arduino/wiring.c b/hardware/arduino/cores/arduino/wiring.c
new file mode 100755
index 0000000..b90d07e
--- /dev/null
+++ b/hardware/arduino/cores/arduino/wiring.c
@@ -0,0 +1,289 @@
+/*
+ wiring.c - Partial implementation of the Wiring API for the ATmega8.
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2005-2006 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id$
+*/
+
+#include "wiring_private.h"
+
+// the prescaler is set so that timer0 ticks every 64 clock cycles, and the
+// the overflow handler is called every 256 ticks.
+#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256))
+
+// the whole number of milliseconds per timer0 overflow
+#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000)
+
+// the fractional number of milliseconds per timer0 overflow. we shift right
+// by three to fit these numbers into a byte. (for the clock speeds we care
+// about - 8 and 16 MHz - this doesn't lose precision.)
+#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3)
+#define FRACT_MAX (1000 >> 3)
+
+volatile unsigned long timer0_overflow_count = 0;
+volatile unsigned long timer0_millis = 0;
+static unsigned char timer0_fract = 0;
+
+SIGNAL(TIMER0_OVF_vect)
+{
+ // copy these to local variables so they can be stored in registers
+ // (volatile variables must be read from memory on every access)
+ unsigned long m = timer0_millis;
+ unsigned char f = timer0_fract;
+
+ m += MILLIS_INC;
+ f += FRACT_INC;
+ if (f >= FRACT_MAX) {
+ f -= FRACT_MAX;
+ m += 1;
+ }
+
+ timer0_fract = f;
+ timer0_millis = m;
+ timer0_overflow_count++;
+}
+
+unsigned long millis()
+{
+ unsigned long m;
+ uint8_t oldSREG = SREG;
+
+ // disable interrupts while we read timer0_millis or we might get an
+ // inconsistent value (e.g. in the middle of a write to timer0_millis)
+ cli();
+ m = timer0_millis;
+ SREG = oldSREG;
+
+ return m;
+}
+
+unsigned long micros() {
+ unsigned long m;
+ uint8_t oldSREG = SREG, t;
+
+ cli();
+ m = timer0_overflow_count;
+#if defined(TCNT0)
+ t = TCNT0;
+#elif defined(TCNT0L)
+ t = TCNT0L;
+#else
+ #error TIMER 0 not defined
+#endif
+
+
+#ifdef TIFR0
+ if ((TIFR0 & _BV(TOV0)) && (t < 255))
+ m++;
+#else
+ if ((TIFR & _BV(TOV0)) && (t < 255))
+ m++;
+#endif
+
+ SREG = oldSREG;
+
+ return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond());
+}
+
+void delay(unsigned long ms)
+{
+ uint16_t start = (uint16_t)micros();
+
+ while (ms > 0) {
+ if (((uint16_t)micros() - start) >= 1000) {
+ ms--;
+ start += 1000;
+ }
+ }
+}
+
+/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */
+void delayMicroseconds(unsigned int us)
+{
+ // calling avrlib's delay_us() function with low values (e.g. 1 or
+ // 2 microseconds) gives delays longer than desired.
+ //delay_us(us);
+
+#if F_CPU >= 16000000L
+ // for the 16 MHz clock on most Arduino boards
+
+ // for a one-microsecond delay, simply return. the overhead
+ // of the function call yields a delay of approximately 1 1/8 us.
+ if (--us == 0)
+ return;
+
+ // the following loop takes a quarter of a microsecond (4 cycles)
+ // per iteration, so execute it four times for each microsecond of
+ // delay requested.
+ us <<= 2;
+
+ // account for the time taken in the preceeding commands.
+ us -= 2;
+#else
+ // for the 8 MHz internal clock on the ATmega168
+
+ // for a one- or two-microsecond delay, simply return. the overhead of
+ // the function calls takes more than two microseconds. can't just
+ // subtract two, since us is unsigned; we'd overflow.
+ if (--us == 0)
+ return;
+ if (--us == 0)
+ return;
+
+ // the following loop takes half of a microsecond (4 cycles)
+ // per iteration, so execute it twice for each microsecond of
+ // delay requested.
+ us <<= 1;
+
+ // partially compensate for the time taken by the preceeding commands.
+ // we can't subtract any more than this or we'd overflow w/ small delays.
+ us--;
+#endif
+
+ // busy wait
+ __asm__ __volatile__ (
+ "1: sbiw %0,1" "\n\t" // 2 cycles
+ "brne 1b" : "=w" (us) : "0" (us) // 2 cycles
+ );
+}
+
+void init()
+{
+ // this needs to be called before setup() or some functions won't
+ // work there
+ sei();
+
+ // on the ATmega168, timer 0 is also used for fast hardware pwm
+ // (using phase-correct PWM would mean that timer 0 overflowed half as often
+ // resulting in different millis() behavior on the ATmega8 and ATmega168)
+#if defined(TCCR0A) && defined(WGM01)
+ sbi(TCCR0A, WGM01);
+ sbi(TCCR0A, WGM00);
+#endif
+
+ // set timer 0 prescale factor to 64
+#if defined(__AVR_ATmega128__)
+ // CPU specific: different values for the ATmega128
+ sbi(TCCR0, CS02);
+#elif defined(TCCR0) && defined(CS01) && defined(CS00)
+ // this combination is for the standard atmega8
+ sbi(TCCR0, CS01);
+ sbi(TCCR0, CS00);
+#elif defined(TCCR0B) && defined(CS01) && defined(CS00)
+ // this combination is for the standard 168/328/1280/2560
+ sbi(TCCR0B, CS01);
+ sbi(TCCR0B, CS00);
+#elif defined(TCCR0A) && defined(CS01) && defined(CS00)
+ // this combination is for the __AVR_ATmega645__ series
+ sbi(TCCR0A, CS01);
+ sbi(TCCR0A, CS00);
+#else
+ #error Timer 0 prescale factor 64 not set correctly
+#endif
+
+ // enable timer 0 overflow interrupt
+#if defined(TIMSK) && defined(TOIE0)
+ sbi(TIMSK, TOIE0);
+#elif defined(TIMSK0) && defined(TOIE0)
+ sbi(TIMSK0, TOIE0);
+#else
+ #error Timer 0 overflow interrupt not set correctly
+#endif
+
+ // timers 1 and 2 are used for phase-correct hardware pwm
+ // this is better for motors as it ensures an even waveform
+ // note, however, that fast pwm mode can achieve a frequency of up
+ // 8 MHz (with a 16 MHz clock) at 50% duty cycle
+
+ TCCR1B = 0;
+
+ // set timer 1 prescale factor to 64
+#if defined(TCCR1B) && defined(CS11) && defined(CS10)
+ sbi(TCCR1B, CS11);
+ sbi(TCCR1B, CS10);
+#elif defined(TCCR1) && defined(CS11) && defined(CS10)
+ sbi(TCCR1, CS11);
+ sbi(TCCR1, CS10);
+#endif
+ // put timer 1 in 8-bit phase correct pwm mode
+#if defined(TCCR1A) && defined(WGM10)
+ sbi(TCCR1A, WGM10);
+#elif defined(TCCR1)
+ #warning this needs to be finished
+#endif
+
+ // set timer 2 prescale factor to 64
+#if defined(TCCR2) && defined(CS22)
+ sbi(TCCR2, CS22);
+#elif defined(TCCR2B) && defined(CS22)
+ sbi(TCCR2B, CS22);
+#else
+ #warning Timer 2 not finished (may not be present on this CPU)
+#endif
+
+ // configure timer 2 for phase correct pwm (8-bit)
+#if defined(TCCR2) && defined(WGM20)
+ sbi(TCCR2, WGM20);
+#elif defined(TCCR2A) && defined(WGM20)
+ sbi(TCCR2A, WGM20);
+#else
+ #warning Timer 2 not finished (may not be present on this CPU)
+#endif
+
+#if defined(TCCR3B) && defined(CS31) && defined(WGM30)
+ sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64
+ sbi(TCCR3B, CS30);
+ sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode
+#endif
+
+#if defined(TCCR4B) && defined(CS41) && defined(WGM40)
+ sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64
+ sbi(TCCR4B, CS40);
+ sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode
+#endif
+
+#if defined(TCCR5B) && defined(CS51) && defined(WGM50)
+ sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64
+ sbi(TCCR5B, CS50);
+ sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode
+#endif
+
+#if defined(ADCSRA)
+ // set a2d prescale factor to 128
+ // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
+ // XXX: this will not work properly for other clock speeds, and
+ // this code should use F_CPU to determine the prescale factor.
+ sbi(ADCSRA, ADPS2);
+ sbi(ADCSRA, ADPS1);
+ sbi(ADCSRA, ADPS0);
+
+ // enable a2d conversions
+ sbi(ADCSRA, ADEN);
+#endif
+
+ // the bootloader connects pins 0 and 1 to the USART; disconnect them
+ // here so they can be used as normal digital i/o; they will be
+ // reconnected in Serial.begin()
+#if defined(UCSRB)
+ UCSRB = 0;
+#elif defined(UCSR0B)
+ UCSR0B = 0;
+#endif
+}
diff --git a/hardware/arduino/cores/arduino/wiring.h b/hardware/arduino/cores/arduino/wiring.h
new file mode 100755
index 0000000..e29959b
--- /dev/null
+++ b/hardware/arduino/cores/arduino/wiring.h
@@ -0,0 +1,135 @@
+/*
+ wiring.h - Partial implementation of the Wiring API for the ATmega8.
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2005-2006 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id$
+*/
+
+#ifndef Wiring_h
+#define Wiring_h
+
+#include <avr/io.h>
+#include <stdlib.h>
+#include "binary.h"
+
+#ifdef __cplusplus
+extern "C"{
+#endif
+
+#define HIGH 0x1
+#define LOW 0x0
+
+#define INPUT 0x0
+#define OUTPUT 0x1
+
+#define true 0x1
+#define false 0x0
+
+#define PI 3.1415926535897932384626433832795
+#define HALF_PI 1.5707963267948966192313216916398
+#define TWO_PI 6.283185307179586476925286766559
+#define DEG_TO_RAD 0.017453292519943295769236907684886
+#define RAD_TO_DEG 57.295779513082320876798154814105
+
+#define SERIAL 0x0
+#define DISPLAY 0x1
+
+#define LSBFIRST 0
+#define MSBFIRST 1
+
+#define CHANGE 1
+#define FALLING 2
+#define RISING 3
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define INTERNAL1V1 2
+#define INTERNAL2V56 3
+#else
+#define INTERNAL 3
+#endif
+#define DEFAULT 1
+#define EXTERNAL 0
+
+// undefine stdlib's abs if encountered
+#ifdef abs
+#undef abs
+#endif
+
+#define min(a,b) ((a)<(b)?(a):(b))
+#define max(a,b) ((a)>(b)?(a):(b))
+#define abs(x) ((x)>0?(x):-(x))
+#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
+#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
+#define radians(deg) ((deg)*DEG_TO_RAD)
+#define degrees(rad) ((rad)*RAD_TO_DEG)
+#define sq(x) ((x)*(x))
+
+#define interrupts() sei()
+#define noInterrupts() cli()
+
+#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
+#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) )
+#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L )
+
+#define lowByte(w) ((uint8_t) ((w) & 0xff))
+#define highByte(w) ((uint8_t) ((w) >> 8))
+
+#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
+#define bitSet(value, bit) ((value) |= (1UL << (bit)))
+#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
+#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
+
+
+typedef unsigned int word;
+
+#define bit(b) (1UL << (b))
+
+typedef uint8_t boolean;
+typedef uint8_t byte;
+
+void init(void);
+
+void pinMode(uint8_t, uint8_t);
+void digitalWrite(uint8_t, uint8_t);
+int digitalRead(uint8_t);
+int analogRead(uint8_t);
+void analogReference(uint8_t mode);
+void analogWrite(uint8_t, int);
+
+unsigned long millis(void);
+unsigned long micros(void);
+void delay(unsigned long);
+void delayMicroseconds(unsigned int us);
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
+
+void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
+uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
+
+void attachInterrupt(uint8_t, void (*)(void), int mode);
+void detachInterrupt(uint8_t);
+
+void setup(void);
+void loop(void);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif
diff --git a/hardware/arduino/cores/arduino/wiring_analog.c b/hardware/arduino/cores/arduino/wiring_analog.c
new file mode 100644
index 0000000..d248f4c
--- /dev/null
+++ b/hardware/arduino/cores/arduino/wiring_analog.c
@@ -0,0 +1,259 @@
+/*
+ wiring_analog.c - analog input and output
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2005-2006 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ Modified 28 September 2010 by Mark Sproul
+
+ $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+uint8_t analog_reference = DEFAULT;
+
+void analogReference(uint8_t mode)
+{
+ // can't actually set the register here because the default setting
+ // will connect AVCC and the AREF pin, which would cause a short if
+ // there's something connected to AREF.
+ analog_reference = mode;
+}
+
+int analogRead(uint8_t pin)
+{
+ uint8_t low, high;
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+ if (pin >= 54) pin -= 54; // allow for channel or pin numbers
+#else
+ if (pin >= 14) pin -= 14; // allow for channel or pin numbers
+#endif
+
+#if defined(ADCSRB) && defined(MUX5)
+ // the MUX5 bit of ADCSRB selects whether we're reading from channels
+ // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high).
+ ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
+#endif
+
+ // set the analog reference (high two bits of ADMUX) and select the
+ // channel (low 4 bits). this also sets ADLAR (left-adjust result)
+ // to 0 (the default).
+#if defined(ADMUX)
+ ADMUX = (analog_reference << 6) | (pin & 0x07);
+#endif
+
+ // without a delay, we seem to read from the wrong channel
+ //delay(1);
+
+#if defined(ADCSRA) && defined(ADCL)
+ // start the conversion
+ sbi(ADCSRA, ADSC);
+
+ // ADSC is cleared when the conversion finishes
+ while (bit_is_set(ADCSRA, ADSC));
+
+ // we have to read ADCL first; doing so locks both ADCL
+ // and ADCH until ADCH is read. reading ADCL second would
+ // cause the results of each conversion to be discarded,
+ // as ADCL and ADCH would be locked when it completed.
+ low = ADCL;
+ high = ADCH;
+#else
+ // we dont have an ADC, return 0
+ low = 0;
+ high = 0;
+#endif
+
+ // combine the two bytes
+ return (high << 8) | low;
+}
+
+// Right now, PWM output only works on the pins with
+// hardware support. These are defined in the appropriate
+// pins_*.c file. For the rest of the pins, we default
+// to digital output.
+void analogWrite(uint8_t pin, int val)
+{
+ // We need to make sure the PWM output is enabled for those pins
+ // that support it, as we turn it off when digitally reading or
+ // writing with them. Also, make sure the pin is in output mode
+ // for consistenty with Wiring, which doesn't require a pinMode
+ // call for the analog output pins.
+ pinMode(pin, OUTPUT);
+ if (val == 0)
+ {
+ digitalWrite(pin, LOW);
+ }
+ else if (val == 255)
+ {
+ digitalWrite(pin, HIGH);
+ }
+ else
+ {
+ switch(digitalPinToTimer(pin))
+ {
+ // XXX fix needed for atmega8
+ #if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__)
+ case TIMER0A:
+ // connect pwm to pin on timer 0
+ sbi(TCCR0, COM00);
+ OCR0 = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR0A) && defined(COM0A1)
+ case TIMER0A:
+ // connect pwm to pin on timer 0, channel A
+ sbi(TCCR0A, COM0A1);
+ OCR0A = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR0A) && defined(COM0B1)
+ case TIMER0B:
+ // connect pwm to pin on timer 0, channel B
+ sbi(TCCR0A, COM0B1);
+ OCR0B = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR1A) && defined(COM1A1)
+ case TIMER1A:
+ // connect pwm to pin on timer 1, channel A
+ sbi(TCCR1A, COM1A1);
+ OCR1A = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR1A) && defined(COM1B1)
+ case TIMER1B:
+ // connect pwm to pin on timer 1, channel B
+ sbi(TCCR1A, COM1B1);
+ OCR1B = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR2) && defined(COM21)
+ case TIMER2:
+ // connect pwm to pin on timer 2
+ sbi(TCCR2, COM21);
+ OCR2 = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR2A) && defined(COM2A1)
+ case TIMER2A:
+ // connect pwm to pin on timer 2, channel A
+ sbi(TCCR2A, COM2A1);
+ OCR2A = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR2A) && defined(COM2B1)
+ case TIMER2B:
+ // connect pwm to pin on timer 2, channel B
+ sbi(TCCR2A, COM2B1);
+ OCR2B = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR3A) && defined(COM3A1)
+ case TIMER3A:
+ // connect pwm to pin on timer 3, channel A
+ sbi(TCCR3A, COM3A1);
+ OCR3A = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR3A) && defined(COM3B1)
+ case TIMER3B:
+ // connect pwm to pin on timer 3, channel B
+ sbi(TCCR3A, COM3B1);
+ OCR3B = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR3A) && defined(COM3C1)
+ case TIMER3C:
+ // connect pwm to pin on timer 3, channel C
+ sbi(TCCR3A, COM3C1);
+ OCR3C = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR4A) && defined(COM4A1)
+ case TIMER4A:
+ // connect pwm to pin on timer 4, channel A
+ sbi(TCCR4A, COM4A1);
+ OCR4A = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR4A) && defined(COM4B1)
+ case TIMER4B:
+ // connect pwm to pin on timer 4, channel B
+ sbi(TCCR4A, COM4B1);
+ OCR4B = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR4A) && defined(COM4C1)
+ case TIMER4C:
+ // connect pwm to pin on timer 4, channel C
+ sbi(TCCR4A, COM4C1);
+ OCR4C = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR5A) && defined(COM5A1)
+ case TIMER5A:
+ // connect pwm to pin on timer 5, channel A
+ sbi(TCCR5A, COM5A1);
+ OCR5A = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR5A) && defined(COM5B1)
+ case TIMER5B:
+ // connect pwm to pin on timer 5, channel B
+ sbi(TCCR5A, COM5B1);
+ OCR5B = val; // set pwm duty
+ break;
+ #endif
+
+ #if defined(TCCR5A) && defined(COM5C1)
+ case TIMER5C:
+ // connect pwm to pin on timer 5, channel C
+ sbi(TCCR5A, COM5C1);
+ OCR5C = val; // set pwm duty
+ break;
+ #endif
+
+ case NOT_ON_TIMER:
+ default:
+ if (val < 128) {
+ digitalWrite(pin, LOW);
+ } else {
+ digitalWrite(pin, HIGH);
+ }
+ }
+ }
+}
diff --git a/hardware/arduino/cores/arduino/wiring_digital.c b/hardware/arduino/cores/arduino/wiring_digital.c
new file mode 100755
index 0000000..0949da4
--- /dev/null
+++ b/hardware/arduino/cores/arduino/wiring_digital.c
@@ -0,0 +1,166 @@
+/*
+ wiring_digital.c - digital input and output functions
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2005-2006 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ Modified 28 September 2010 by Mark Sproul
+
+ $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+void pinMode(uint8_t pin, uint8_t mode)
+{
+ uint8_t bit = digitalPinToBitMask(pin);
+ uint8_t port = digitalPinToPort(pin);
+ volatile uint8_t *reg;
+
+ if (port == NOT_A_PIN) return;
+
+ // JWS: can I let the optimizer do this?
+ reg = portModeRegister(port);
+
+ if (mode == INPUT) {
+ uint8_t oldSREG = SREG;
+ cli();
+ *reg &= ~bit;
+ SREG = oldSREG;
+ } else {
+ uint8_t oldSREG = SREG;
+ cli();
+ *reg |= bit;
+ SREG = oldSREG;
+ }
+}
+
+// Forcing this inline keeps the callers from having to push their own stuff
+// on the stack. It is a good performance win and only takes 1 more byte per
+// user than calling. (It will take more bytes on the 168.)
+//
+// But shouldn't this be moved into pinMode? Seems silly to check and do on
+// each digitalread or write.
+//
+// Mark Sproul:
+// - Removed inline. Save 170 bytes on atmega1280
+// - changed to a switch statment; added 32 bytes but much easier to read and maintain.
+// - Added more #ifdefs, now compiles for atmega645
+//
+//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline));
+//static inline void turnOffPWM(uint8_t timer)
+static void turnOffPWM(uint8_t timer)
+{
+ switch (timer)
+ {
+ #if defined(TCCR1A) && defined(COM1A1)
+ case TIMER1A: cbi(TCCR1A, COM1A1); break;
+ #endif
+ #if defined(TCCR1A) && defined(COM1B1)
+ case TIMER1B: cbi(TCCR1A, COM1B1); break;
+ #endif
+
+ #if defined(TCCR2) && defined(COM21)
+ case TIMER2: cbi(TCCR2, COM21); break;
+ #endif
+
+ #if defined(TCCR0A) && defined(COM0A1)
+ case TIMER0A: cbi(TCCR0A, COM0A1); break;
+ #endif
+
+ #if defined(TIMER0B) && defined(COM0B1)
+ case TIMER0B: cbi(TCCR0A, COM0B1); break;
+ #endif
+ #if defined(TCCR2A) && defined(COM2A1)
+ case TIMER2A: cbi(TCCR2A, COM2A1); break;
+ #endif
+ #if defined(TCCR2A) && defined(COM2B1)
+ case TIMER2B: cbi(TCCR2A, COM2B1); break;
+ #endif
+
+ #if defined(TCCR3A) && defined(COM3A1)
+ case TIMER3A: cbi(TCCR3A, COM3A1); break;
+ #endif
+ #if defined(TCCR3A) && defined(COM3B1)
+ case TIMER3B: cbi(TCCR3A, COM3B1); break;
+ #endif
+ #if defined(TCCR3A) && defined(COM3C1)
+ case TIMER3C: cbi(TCCR3A, COM3C1); break;
+ #endif
+
+ #if defined(TCCR4A) && defined(COM4A1)
+ case TIMER4A: cbi(TCCR4A, COM4A1); break;
+ #endif
+ #if defined(TCCR4A) && defined(COM4B1)
+ case TIMER4B: cbi(TCCR4A, COM4B1); break;
+ #endif
+ #if defined(TCCR4A) && defined(COM4C1)
+ case TIMER4C: cbi(TCCR4A, COM4C1); break;
+ #endif
+ #if defined(TCCR5A)
+ case TIMER5A: cbi(TCCR5A, COM5A1); break;
+ case TIMER5B: cbi(TCCR5A, COM5B1); break;
+ case TIMER5C: cbi(TCCR5A, COM5C1); break;
+ #endif
+ }
+}
+
+void digitalWrite(uint8_t pin, uint8_t val)
+{
+ uint8_t timer = digitalPinToTimer(pin);
+ uint8_t bit = digitalPinToBitMask(pin);
+ uint8_t port = digitalPinToPort(pin);
+ volatile uint8_t *out;
+
+ if (port == NOT_A_PIN) return;
+
+ // If the pin that support PWM output, we need to turn it off
+ // before doing a digital write.
+ if (timer != NOT_ON_TIMER) turnOffPWM(timer);
+
+ out = portOutputRegister(port);
+
+ if (val == LOW) {
+ uint8_t oldSREG = SREG;
+ cli();
+ *out &= ~bit;
+ SREG = oldSREG;
+ } else {
+ uint8_t oldSREG = SREG;
+ cli();
+ *out |= bit;
+ SREG = oldSREG;
+ }
+}
+
+int digitalRead(uint8_t pin)
+{
+ uint8_t timer = digitalPinToTimer(pin);
+ uint8_t bit = digitalPinToBitMask(pin);
+ uint8_t port = digitalPinToPort(pin);
+
+ if (port == NOT_A_PIN) return LOW;
+
+ // If the pin that support PWM output, we need to turn it off
+ // before getting a digital reading.
+ if (timer != NOT_ON_TIMER) turnOffPWM(timer);
+
+ if (*portInputRegister(port) & bit) return HIGH;
+ return LOW;
+}
diff --git a/hardware/arduino/cores/arduino/wiring_private.h b/hardware/arduino/cores/arduino/wiring_private.h
new file mode 100755
index 0000000..11f6f00
--- /dev/null
+++ b/hardware/arduino/cores/arduino/wiring_private.h
@@ -0,0 +1,68 @@
+/*
+ wiring_private.h - Internal header file.
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2005-2006 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $
+*/
+
+#ifndef WiringPrivate_h
+#define WiringPrivate_h
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/delay.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+#include "wiring.h"
+
+#ifdef __cplusplus
+extern "C"{
+#endif
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+#define EXTERNAL_INT_0 0
+#define EXTERNAL_INT_1 1
+#define EXTERNAL_INT_2 2
+#define EXTERNAL_INT_3 3
+#define EXTERNAL_INT_4 4
+#define EXTERNAL_INT_5 5
+#define EXTERNAL_INT_6 6
+#define EXTERNAL_INT_7 7
+
+#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define EXTERNAL_NUM_INTERRUPTS 8
+#else
+#define EXTERNAL_NUM_INTERRUPTS 2
+#endif
+
+typedef void (*voidFuncPtr)(void);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif
diff --git a/hardware/arduino/cores/arduino/wiring_pulse.c b/hardware/arduino/cores/arduino/wiring_pulse.c
new file mode 100755
index 0000000..0d96886
--- /dev/null
+++ b/hardware/arduino/cores/arduino/wiring_pulse.c
@@ -0,0 +1,69 @@
+/*
+ wiring_pulse.c - pulseIn() function
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2005-2006 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+#include "pins_arduino.h"
+
+/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH
+ * or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds
+ * to 3 minutes in length, but must be called at least a few dozen microseconds
+ * before the start of the pulse. */
+unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout)
+{
+ // cache the port and bit of the pin in order to speed up the
+ // pulse width measuring loop and achieve finer resolution. calling
+ // digitalRead() instead yields much coarser resolution.
+ uint8_t bit = digitalPinToBitMask(pin);
+ uint8_t port = digitalPinToPort(pin);
+ uint8_t stateMask = (state ? bit : 0);
+ unsigned long width = 0; // keep initialization out of time critical area
+
+ // convert the timeout from microseconds to a number of times through
+ // the initial loop; it takes 16 clock cycles per iteration.
+ unsigned long numloops = 0;
+ unsigned long maxloops = microsecondsToClockCycles(timeout) / 16;
+
+ // wait for any previous pulse to end
+ while ((*portInputRegister(port) & bit) == stateMask)
+ if (numloops++ == maxloops)
+ return 0;
+
+ // wait for the pulse to start
+ while ((*portInputRegister(port) & bit) != stateMask)
+ if (numloops++ == maxloops)
+ return 0;
+
+ // wait for the pulse to stop
+ while ((*portInputRegister(port) & bit) == stateMask) {
+ if (numloops++ == maxloops)
+ return 0;
+ width++;
+ }
+
+ // convert the reading to microseconds. The loop has been determined
+ // to be 20 clock cycles long and have about 16 clocks between the edge
+ // and the start of the loop. There will be some error introduced by
+ // the interrupt handlers.
+ return clockCyclesToMicroseconds(width * 21 + 16);
+}
diff --git a/hardware/arduino/cores/arduino/wiring_shift.c b/hardware/arduino/cores/arduino/wiring_shift.c
new file mode 100755
index 0000000..cfe7867
--- /dev/null
+++ b/hardware/arduino/cores/arduino/wiring_shift.c
@@ -0,0 +1,55 @@
+/*
+ wiring_shift.c - shiftOut() function
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2005-2006 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
+*/
+
+#include "wiring_private.h"
+
+uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) {
+ uint8_t value = 0;
+ uint8_t i;
+
+ for (i = 0; i < 8; ++i) {
+ digitalWrite(clockPin, HIGH);
+ if (bitOrder == LSBFIRST)
+ value |= digitalRead(dataPin) << i;
+ else
+ value |= digitalRead(dataPin) << (7 - i);
+ digitalWrite(clockPin, LOW);
+ }
+ return value;
+}
+
+void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val)
+{
+ uint8_t i;
+
+ for (i = 0; i < 8; i++) {
+ if (bitOrder == LSBFIRST)
+ digitalWrite(dataPin, !!(val & (1 << i)));
+ else
+ digitalWrite(dataPin, !!(val & (1 << (7 - i))));
+
+ digitalWrite(clockPin, HIGH);
+ digitalWrite(clockPin, LOW);
+ }
+}
diff --git a/libraries/SPI/SPI.cpp b/libraries/SPI/SPI.cpp
new file mode 100644
index 0000000..42915df
--- /dev/null
+++ b/libraries/SPI/SPI.cpp
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st>
+ * SPI Master library for arduino.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of either the GNU General Public License version 2
+ * or the GNU Lesser General Public License version 2.1, both as
+ * published by the Free Software Foundation.
+ */
+
+#include "pins_arduino.h"
+#include "SPI.h"
+
+SPIClass SPI;
+
+void SPIClass::begin() {
+ // Set direction register for SCK and MOSI pin.
+ // MISO pin automatically overrides to INPUT.
+ // When the SS pin is set as OUTPUT, it can be used as
+ // a general purpose output port (it doesn't influence
+ // SPI operations).
+
+ pinMode(SCK, OUTPUT);
+ pinMode(MOSI, OUTPUT);
+ pinMode(SS, OUTPUT);
+
+ digitalWrite(SCK, LOW);
+ digitalWrite(MOSI, LOW);
+ digitalWrite(SS, HIGH);
+
+ // Warning: if the SS pin ever becomes a LOW INPUT then SPI
+ // automatically switches to Slave, so the data direction of
+ // the SS pin MUST be kept as OUTPUT.
+ SPCR |= _BV(MSTR);
+ SPCR |= _BV(SPE);
+}
+
+void SPIClass::end() {
+ SPCR &= ~_BV(SPE);
+}
+
+void SPIClass::setBitOrder(uint8_t bitOrder)
+{
+ if(bitOrder == LSBFIRST) {
+ SPCR |= _BV(DORD);
+ } else {
+ SPCR &= ~(_BV(DORD));
+ }
+}
+
+void SPIClass::setDataMode(uint8_t mode)
+{
+ SPCR = (SPCR & ~SPI_MODE_MASK) | mode;
+}
+
+void SPIClass::setClockDivider(uint8_t rate)
+{
+ SPCR = (SPCR & ~SPI_CLOCK_MASK) | (rate & SPI_CLOCK_MASK);
+ SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((rate >> 2) & SPI_2XCLOCK_MASK);
+}
+
diff --git a/libraries/SPI/SPI.h b/libraries/SPI/SPI.h
new file mode 100644
index 0000000..9d7c3c7
--- /dev/null
+++ b/libraries/SPI/SPI.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2010 by Cristian Maglie <c.maglie@bug.st>
+ * SPI Master library for arduino.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of either the GNU General Public License version 2
+ * or the GNU Lesser General Public License version 2.1, both as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _SPI_H_INCLUDED
+#define _SPI_H_INCLUDED
+
+#include <stdio.h>
+#include <WProgram.h>
+#include <avr/pgmspace.h>
+
+#define SPI_CLOCK_DIV4 0x00
+#define SPI_CLOCK_DIV16 0x01
+#define SPI_CLOCK_DIV64 0x02
+#define SPI_CLOCK_DIV128 0x03
+#define SPI_CLOCK_DIV2 0x04
+#define SPI_CLOCK_DIV8 0x05
+#define SPI_CLOCK_DIV32 0x06
+#define SPI_CLOCK_DIV64 0x07
+
+#define SPI_MODE0 0x00
+#define SPI_MODE1 0x04
+#define SPI_MODE2 0x08
+#define SPI_MODE3 0x0C
+
+#define SPI_MODE_MASK 0x0C // CPOL = bit 3, CPHA = bit 2 on SPCR
+#define SPI_CLOCK_MASK 0x03 // SPR1 = bit 1, SPR0 = bit 0 on SPCR
+#define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR
+
+class SPIClass {
+public:
+ inline static byte transfer(byte _data);
+
+ // SPI Configuration methods
+
+ inline static void attachInterrupt();
+ inline static void detachInterrupt(); // Default
+
+ static void begin(); // Default
+ static void end();
+
+ static void setBitOrder(uint8_t);
+ static void setDataMode(uint8_t);
+ static void setClockDivider(uint8_t);
+};
+
+extern SPIClass SPI;
+
+byte SPIClass::transfer(byte _data) {
+ SPDR = _data;
+ while (!(SPSR & _BV(SPIF)))
+ ;
+ return SPDR;
+}
+
+void SPIClass::attachInterrupt() {
+ SPCR |= _BV(SPIE);
+}
+
+void SPIClass::detachInterrupt() {
+ SPCR &= ~_BV(SPIE);
+}
+
+#endif
diff --git a/libraries/SPI/keywords.txt b/libraries/SPI/keywords.txt
new file mode 100644
index 0000000..fa76165
--- /dev/null
+++ b/libraries/SPI/keywords.txt
@@ -0,0 +1,36 @@
+#######################################
+# Syntax Coloring Map SPI
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+SPI KEYWORD1
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+begin KEYWORD2
+end KEYWORD2
+transfer KEYWORD2
+setBitOrder KEYWORD2
+setDataMode KEYWORD2
+setClockDivider KEYWORD2
+
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+SPI_CLOCK_DIV4 LITERAL1
+SPI_CLOCK_DIV16 LITERAL1
+SPI_CLOCK_DIV64 LITERAL1
+SPI_CLOCK_DIV128 LITERAL1
+SPI_CLOCK_DIV2 LITERAL1
+SPI_CLOCK_DIV8 LITERAL1
+SPI_CLOCK_DIV32 LITERAL1
+SPI_CLOCK_DIV64 LITERAL1
+SPI_MODE0 LITERAL1
+SPI_MODE1 LITERAL1
+SPI_MODE2 LITERAL1
+SPI_MODE3 LITERAL1
\ No newline at end of file
diff --git a/libraries/Wire/Wire.cpp b/libraries/Wire/Wire.cpp
new file mode 100755
index 0000000..849439b
--- /dev/null
+++ b/libraries/Wire/Wire.cpp
@@ -0,0 +1,261 @@
+/*
+ TwoWire.cpp - TWI/I2C library for Wiring & Arduino
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+extern "C" {
+ #include <stdlib.h>
+ #include <string.h>
+ #include <inttypes.h>
+ #include "twi.h"
+}
+
+#include "Wire.h"
+
+// Initialize Class Variables //////////////////////////////////////////////////
+
+uint8_t TwoWire::rxBuffer[BUFFER_LENGTH];
+uint8_t TwoWire::rxBufferIndex = 0;
+uint8_t TwoWire::rxBufferLength = 0;
+
+uint8_t TwoWire::txAddress = 0;
+uint8_t TwoWire::txBuffer[BUFFER_LENGTH];
+uint8_t TwoWire::txBufferIndex = 0;
+uint8_t TwoWire::txBufferLength = 0;
+
+uint8_t TwoWire::transmitting = 0;
+void (*TwoWire::user_onRequest)(void);
+void (*TwoWire::user_onReceive)(int);
+
+// Constructors ////////////////////////////////////////////////////////////////
+
+TwoWire::TwoWire()
+{
+}
+
+// Public Methods //////////////////////////////////////////////////////////////
+
+void TwoWire::begin(void)
+{
+ rxBufferIndex = 0;
+ rxBufferLength = 0;
+
+ txBufferIndex = 0;
+ txBufferLength = 0;
+
+ twi_init();
+}
+
+void TwoWire::begin(uint8_t address)
+{
+ twi_setAddress(address);
+ twi_attachSlaveTxEvent(onRequestService);
+ twi_attachSlaveRxEvent(onReceiveService);
+ begin();
+}
+
+void TwoWire::begin(int address)
+{
+ begin((uint8_t)address);
+}
+
+uint8_t TwoWire::requestFrom(uint8_t address, uint8_t quantity)
+{
+ // clamp to buffer length
+ if(quantity > BUFFER_LENGTH){
+ quantity = BUFFER_LENGTH;
+ }
+ // perform blocking read into buffer
+ uint8_t read = twi_readFrom(address, rxBuffer, quantity);
+ // set rx buffer iterator vars
+ rxBufferIndex = 0;
+ rxBufferLength = read;
+
+ return read;
+}
+
+uint8_t TwoWire::requestFrom(int address, int quantity)
+{
+ return requestFrom((uint8_t)address, (uint8_t)quantity);
+}
+
+void TwoWire::beginTransmission(uint8_t address)
+{
+ // indicate that we are transmitting
+ transmitting = 1;
+ // set address of targeted slave
+ txAddress = address;
+ // reset tx buffer iterator vars
+ txBufferIndex = 0;
+ txBufferLength = 0;
+}
+
+void TwoWire::beginTransmission(int address)
+{
+ beginTransmission((uint8_t)address);
+}
+
+uint8_t TwoWire::endTransmission(void)
+{
+ // transmit buffer (blocking)
+ int8_t ret = twi_writeTo(txAddress, txBuffer, txBufferLength, 1);
+ // reset tx buffer iterator vars
+ txBufferIndex = 0;
+ txBufferLength = 0;
+ // indicate that we are done transmitting
+ transmitting = 0;
+ return ret;
+}
+
+// must be called in:
+// slave tx event callback
+// or after beginTransmission(address)
+void TwoWire::send(uint8_t data)
+{
+ if(transmitting){
+ // in master transmitter mode
+ // don't bother if buffer is full
+ if(txBufferLength >= BUFFER_LENGTH){
+ return;
+ }
+ // put byte in tx buffer
+ txBuffer[txBufferIndex] = data;
+ ++txBufferIndex;
+ // update amount in buffer
+ txBufferLength = txBufferIndex;
+ }else{
+ // in slave send mode
+ // reply to master
+ twi_transmit(&data, 1);
+ }
+}
+
+// must be called in:
+// slave tx event callback
+// or after beginTransmission(address)
+void TwoWire::send(uint8_t* data, uint8_t quantity)
+{
+ if(transmitting){
+ // in master transmitter mode
+ for(uint8_t i = 0; i < quantity; ++i){
+ send(data[i]);
+ }
+ }else{
+ // in slave send mode
+ // reply to master
+ twi_transmit(data, quantity);
+ }
+}
+
+// must be called in:
+// slave tx event callback
+// or after beginTransmission(address)
+void TwoWire::send(char* data)
+{
+ send((uint8_t*)data, strlen(data));
+}
+
+// must be called in:
+// slave tx event callback
+// or after beginTransmission(address)
+void TwoWire::send(int data)
+{
+ send((uint8_t)data);
+}
+
+// must be called in:
+// slave rx event callback
+// or after requestFrom(address, numBytes)
+uint8_t TwoWire::available(void)
+{
+ return rxBufferLength - rxBufferIndex;
+}
+
+// must be called in:
+// slave rx event callback
+// or after requestFrom(address, numBytes)
+uint8_t TwoWire::receive(void)
+{
+ // default to returning null char
+ // for people using with char strings
+ uint8_t value = '\0';
+
+ // get each successive byte on each call
+ if(rxBufferIndex < rxBufferLength){
+ value = rxBuffer[rxBufferIndex];
+ ++rxBufferIndex;
+ }
+
+ return value;
+}
+
+// behind the scenes function that is called when data is received
+void TwoWire::onReceiveService(uint8_t* inBytes, int numBytes)
+{
+ // don't bother if user hasn't registered a callback
+ if(!user_onReceive){
+ return;
+ }
+ // don't bother if rx buffer is in use by a master requestFrom() op
+ // i know this drops data, but it allows for slight stupidity
+ // meaning, they may not have read all the master requestFrom() data yet
+ if(rxBufferIndex < rxBufferLength){
+ return;
+ }
+ // copy twi rx buffer into local read buffer
+ // this enables new reads to happen in parallel
+ for(uint8_t i = 0; i < numBytes; ++i){
+ rxBuffer[i] = inBytes[i];
+ }
+ // set rx iterator vars
+ rxBufferIndex = 0;
+ rxBufferLength = numBytes;
+ // alert user program
+ user_onReceive(numBytes);
+}
+
+// behind the scenes function that is called when data is requested
+void TwoWire::onRequestService(void)
+{
+ // don't bother if user hasn't registered a callback
+ if(!user_onRequest){
+ return;
+ }
+ // reset tx buffer iterator vars
+ // !!! this will kill any pending pre-master sendTo() activity
+ txBufferIndex = 0;
+ txBufferLength = 0;
+ // alert user program
+ user_onRequest();
+}
+
+// sets function called on slave write
+void TwoWire::onReceive( void (*function)(int) )
+{
+ user_onReceive = function;
+}
+
+// sets function called on slave read
+void TwoWire::onRequest( void (*function)(void) )
+{
+ user_onRequest = function;
+}
+
+// Preinstantiate Objects //////////////////////////////////////////////////////
+
+TwoWire Wire = TwoWire();
+
diff --git a/libraries/Wire/Wire.h b/libraries/Wire/Wire.h
new file mode 100755
index 0000000..a6c29c4
--- /dev/null
+++ b/libraries/Wire/Wire.h
@@ -0,0 +1,67 @@
+/*
+ TwoWire.h - TWI/I2C library for Arduino & Wiring
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef TwoWire_h
+#define TwoWire_h
+
+#include <inttypes.h>
+
+#define BUFFER_LENGTH 32
+
+class TwoWire
+{
+ private:
+ static uint8_t rxBuffer[];
+ static uint8_t rxBufferIndex;
+ static uint8_t rxBufferLength;
+
+ static uint8_t txAddress;
+ static uint8_t txBuffer[];
+ static uint8_t txBufferIndex;
+ static uint8_t txBufferLength;
+
+ static uint8_t transmitting;
+ static void (*user_onRequest)(void);
+ static void (*user_onReceive)(int);
+ static void onRequestService(void);
+ static void onReceiveService(uint8_t*, int);
+ public:
+ TwoWire();
+ void begin();
+ void begin(uint8_t);
+ void begin(int);
+ void beginTransmission(uint8_t);
+ void beginTransmission(int);
+ uint8_t endTransmission(void);
+ uint8_t requestFrom(uint8_t, uint8_t);
+ uint8_t requestFrom(int, int);
+ void send(uint8_t);
+ void send(uint8_t*, uint8_t);
+ void send(int);
+ void send(char*);
+ uint8_t available(void);
+ uint8_t receive(void);
+ void onReceive( void (*)(int) );
+ void onRequest( void (*)(void) );
+};
+
+extern TwoWire Wire;
+
+#endif
+
diff --git a/libraries/Wire/keywords.txt b/libraries/Wire/keywords.txt
new file mode 100644
index 0000000..12f129b
--- /dev/null
+++ b/libraries/Wire/keywords.txt
@@ -0,0 +1,31 @@
+#######################################
+# Syntax Coloring Map For Wire
+#######################################
+
+#######################################
+# Datatypes (KEYWORD1)
+#######################################
+
+#######################################
+# Methods and Functions (KEYWORD2)
+#######################################
+
+begin KEYWORD2
+beginTransmission KEYWORD2
+endTransmission KEYWORD2
+requestFrom KEYWORD2
+send KEYWORD2
+receive KEYWORD2
+onReceive KEYWORD2
+onRequest KEYWORD2
+
+#######################################
+# Instances (KEYWORD2)
+#######################################
+
+Wire KEYWORD2
+
+#######################################
+# Constants (LITERAL1)
+#######################################
+
diff --git a/libraries/Wire/utility/twi.c b/libraries/Wire/utility/twi.c
new file mode 100644
index 0000000..236878c
--- /dev/null
+++ b/libraries/Wire/utility/twi.c
@@ -0,0 +1,476 @@
+/*
+ twi.c - TWI/I2C library for Wiring & Arduino
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#include <math.h>
+#include <stdlib.h>
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <compat/twi.h>
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+#include "twi.h"
+
+static volatile uint8_t twi_state;
+static uint8_t twi_slarw;
+
+static void (*twi_onSlaveTransmit)(void);
+static void (*twi_onSlaveReceive)(uint8_t*, int);
+
+static uint8_t twi_masterBuffer[TWI_BUFFER_LENGTH];
+static volatile uint8_t twi_masterBufferIndex;
+static uint8_t twi_masterBufferLength;
+
+static uint8_t twi_txBuffer[TWI_BUFFER_LENGTH];
+static volatile uint8_t twi_txBufferIndex;
+static volatile uint8_t twi_txBufferLength;
+
+static uint8_t twi_rxBuffer[TWI_BUFFER_LENGTH];
+static volatile uint8_t twi_rxBufferIndex;
+
+static volatile uint8_t twi_error;
+
+/*
+ * Function twi_init
+ * Desc readys twi pins and sets twi bitrate
+ * Input none
+ * Output none
+ */
+void twi_init(void)
+{
+ // initialize state
+ twi_state = TWI_READY;
+
+ #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__)
+ // activate internal pull-ups for twi
+ // as per note from atmega8 manual pg167
+ sbi(PORTC, 4);
+ sbi(PORTC, 5);
+ #else
+ // activate internal pull-ups for twi
+ // as per note from atmega128 manual pg204
+ sbi(PORTD, 0);
+ sbi(PORTD, 1);
+ #endif
+
+ // initialize twi prescaler and bit rate
+ cbi(TWSR, TWPS0);
+ cbi(TWSR, TWPS1);
+ TWBR = ((CPU_FREQ / TWI_FREQ) - 16) / 2;
+
+ /* twi bit rate formula from atmega128 manual pg 204
+ SCL Frequency = CPU Clock Frequency / (16 + (2 * TWBR))
+ note: TWBR should be 10 or higher for master mode
+ It is 72 for a 16mhz Wiring board with 100kHz TWI */
+
+ // enable twi module, acks, and twi interrupt
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
+}
+
+/*
+ * Function twi_slaveInit
+ * Desc sets slave address and enables interrupt
+ * Input none
+ * Output none
+ */
+void twi_setAddress(uint8_t address)
+{
+ // set twi slave address (skip over TWGCE bit)
+ TWAR = address << 1;
+}
+
+/*
+ * Function twi_readFrom
+ * Desc attempts to become twi bus master and read a
+ * series of bytes from a device on the bus
+ * Input address: 7bit i2c device address
+ * data: pointer to byte array
+ * length: number of bytes to read into array
+ * Output number of bytes read
+ */
+uint8_t twi_readFrom(uint8_t address, uint8_t* data, uint8_t length)
+{
+ uint8_t i;
+
+ // ensure data will fit into buffer
+ if(TWI_BUFFER_LENGTH < length){
+ return 0;
+ }
+
+ // wait until twi is ready, become master receiver
+ while(TWI_READY != twi_state){
+ continue;
+ }
+ twi_state = TWI_MRX;
+ // reset error state (0xFF.. no error occured)
+ twi_error = 0xFF;
+
+ // initialize buffer iteration vars
+ twi_masterBufferIndex = 0;
+ twi_masterBufferLength = length-1; // This is not intuitive, read on...
+ // On receive, the previously configured ACK/NACK setting is transmitted in
+ // response to the received byte before the interrupt is signalled.
+ // Therefor we must actually set NACK when the _next_ to last byte is
+ // received, causing that NACK to be sent in response to receiving the last
+ // expected byte of data.
+
+ // build sla+w, slave device address + w bit
+ twi_slarw = TW_READ;
+ twi_slarw |= address << 1;
+
+ // send start condition
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
+
+ // wait for read operation to complete
+ while(TWI_MRX == twi_state){
+ continue;
+ }
+
+ if (twi_masterBufferIndex < length)
+ length = twi_masterBufferIndex;
+
+ // copy twi buffer to data
+ for(i = 0; i < length; ++i){
+ data[i] = twi_masterBuffer[i];
+ }
+
+ return length;
+}
+
+/*
+ * Function twi_writeTo
+ * Desc attempts to become twi bus master and write a
+ * series of bytes to a device on the bus
+ * Input address: 7bit i2c device address
+ * data: pointer to byte array
+ * length: number of bytes in array
+ * wait: boolean indicating to wait for write or not
+ * Output 0 .. success
+ * 1 .. length to long for buffer
+ * 2 .. address send, NACK received
+ * 3 .. data send, NACK received
+ * 4 .. other twi error (lost bus arbitration, bus error, ..)
+ */
+uint8_t twi_writeTo(uint8_t address, uint8_t* data, uint8_t length, uint8_t wait)
+{
+ uint8_t i;
+
+ // ensure data will fit into buffer
+ if(TWI_BUFFER_LENGTH < length){
+ return 1;
+ }
+
+ // wait until twi is ready, become master transmitter
+ while(TWI_READY != twi_state){
+ continue;
+ }
+ twi_state = TWI_MTX;
+ // reset error state (0xFF.. no error occured)
+ twi_error = 0xFF;
+
+ // initialize buffer iteration vars
+ twi_masterBufferIndex = 0;
+ twi_masterBufferLength = length;
+
+ // copy data to twi buffer
+ for(i = 0; i < length; ++i){
+ twi_masterBuffer[i] = data[i];
+ }
+
+ // build sla+w, slave device address + w bit
+ twi_slarw = TW_WRITE;
+ twi_slarw |= address << 1;
+
+ // send start condition
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
+
+ // wait for write operation to complete
+ while(wait && (TWI_MTX == twi_state)){
+ continue;
+ }
+
+ if (twi_error == 0xFF)
+ return 0; // success
+ else if (twi_error == TW_MT_SLA_NACK)
+ return 2; // error: address send, nack received
+ else if (twi_error == TW_MT_DATA_NACK)
+ return 3; // error: data send, nack received
+ else
+ return 4; // other twi error
+}
+
+/*
+ * Function twi_transmit
+ * Desc fills slave tx buffer with data
+ * must be called in slave tx event callback
+ * Input data: pointer to byte array
+ * length: number of bytes in array
+ * Output 1 length too long for buffer
+ * 2 not slave transmitter
+ * 0 ok
+ */
+uint8_t twi_transmit(uint8_t* data, uint8_t length)
+{
+ uint8_t i;
+
+ // ensure data will fit into buffer
+ if(TWI_BUFFER_LENGTH < length){
+ return 1;
+ }
+
+ // ensure we are currently a slave transmitter
+ if(TWI_STX != twi_state){
+ return 2;
+ }
+
+ // set length and copy data into tx buffer
+ twi_txBufferLength = length;
+ for(i = 0; i < length; ++i){
+ twi_txBuffer[i] = data[i];
+ }
+
+ return 0;
+}
+
+/*
+ * Function twi_attachSlaveRxEvent
+ * Desc sets function called before a slave read operation
+ * Input function: callback function to use
+ * Output none
+ */
+void twi_attachSlaveRxEvent( void (*function)(uint8_t*, int) )
+{
+ twi_onSlaveReceive = function;
+}
+
+/*
+ * Function twi_attachSlaveTxEvent
+ * Desc sets function called before a slave write operation
+ * Input function: callback function to use
+ * Output none
+ */
+void twi_attachSlaveTxEvent( void (*function)(void) )
+{
+ twi_onSlaveTransmit = function;
+}
+
+/*
+ * Function twi_reply
+ * Desc sends byte or readys receive line
+ * Input ack: byte indicating to ack or to nack
+ * Output none
+ */
+void twi_reply(uint8_t ack)
+{
+ // transmit master read ready signal, with or without ack
+ if(ack){
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
+ }else{
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
+ }
+}
+
+/*
+ * Function twi_stop
+ * Desc relinquishes bus master status
+ * Input none
+ * Output none
+ */
+void twi_stop(void)
+{
+ // send stop condition
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
+
+ // wait for stop condition to be exectued on bus
+ // TWINT is not set after a stop condition!
+ while(TWCR & _BV(TWSTO)){
+ continue;
+ }
+
+ // update twi state
+ twi_state = TWI_READY;
+}
+
+/*
+ * Function twi_releaseBus
+ * Desc releases bus control
+ * Input none
+ * Output none
+ */
+void twi_releaseBus(void)
+{
+ // release bus
+ TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
+
+ // update twi state
+ twi_state = TWI_READY;
+}
+
+SIGNAL(TWI_vect)
+{
+ switch(TW_STATUS){
+ // All Master
+ case TW_START: // sent start condition
+ case TW_REP_START: // sent repeated start condition
+ // copy device address and r/w bit to output register and ack
+ TWDR = twi_slarw;
+ twi_reply(1);
+ break;
+
+ // Master Transmitter
+ case TW_MT_SLA_ACK: // slave receiver acked address
+ case TW_MT_DATA_ACK: // slave receiver acked data
+ // if there is data to send, send it, otherwise stop
+ if(twi_masterBufferIndex < twi_masterBufferLength){
+ // copy data to output register and ack
+ TWDR = twi_masterBuffer[twi_masterBufferIndex++];
+ twi_reply(1);
+ }else{
+ twi_stop();
+ }
+ break;
+ case TW_MT_SLA_NACK: // address sent, nack received
+ twi_error = TW_MT_SLA_NACK;
+ twi_stop();
+ break;
+ case TW_MT_DATA_NACK: // data sent, nack received
+ twi_error = TW_MT_DATA_NACK;
+ twi_stop();
+ break;
+ case TW_MT_ARB_LOST: // lost bus arbitration
+ twi_error = TW_MT_ARB_LOST;
+ twi_releaseBus();
+ break;
+
+ // Master Receiver
+ case TW_MR_DATA_ACK: // data received, ack sent
+ // put byte into buffer
+ twi_masterBuffer[twi_masterBufferIndex++] = TWDR;
+ case TW_MR_SLA_ACK: // address sent, ack received
+ // ack if more bytes are expected, otherwise nack
+ if(twi_masterBufferIndex < twi_masterBufferLength){
+ twi_reply(1);
+ }else{
+ twi_reply(0);
+ }
+ break;
+ case TW_MR_DATA_NACK: // data received, nack sent
+ // put final byte into buffer
+ twi_masterBuffer[twi_masterBufferIndex++] = TWDR;
+ case TW_MR_SLA_NACK: // address sent, nack received
+ twi_stop();
+ break;
+ // TW_MR_ARB_LOST handled by TW_MT_ARB_LOST case
+
+ // Slave Receiver
+ case TW_SR_SLA_ACK: // addressed, returned ack
+ case TW_SR_GCALL_ACK: // addressed generally, returned ack
+ case TW_SR_ARB_LOST_SLA_ACK: // lost arbitration, returned ack
+ case TW_SR_ARB_LOST_GCALL_ACK: // lost arbitration, returned ack
+ // enter slave receiver mode
+ twi_state = TWI_SRX;
+ // indicate that rx buffer can be overwritten and ack
+ twi_rxBufferIndex = 0;
+ twi_reply(1);
+ break;
+ case TW_SR_DATA_ACK: // data received, returned ack
+ case TW_SR_GCALL_DATA_ACK: // data received generally, returned ack
+ // if there is still room in the rx buffer
+ if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){
+ // put byte in buffer and ack
+ twi_rxBuffer[twi_rxBufferIndex++] = TWDR;
+ twi_reply(1);
+ }else{
+ // otherwise nack
+ twi_reply(0);
+ }
+ break;
+ case TW_SR_STOP: // stop or repeated start condition received
+ // put a null char after data if there's room
+ if(twi_rxBufferIndex < TWI_BUFFER_LENGTH){
+ twi_rxBuffer[twi_rxBufferIndex] = '\0';
+ }
+ // sends ack and stops interface for clock stretching
+ twi_stop();
+ // callback to user defined callback
+ twi_onSlaveReceive(twi_rxBuffer, twi_rxBufferIndex);
+ // since we submit rx buffer to "wire" library, we can reset it
+ twi_rxBufferIndex = 0;
+ // ack future responses and leave slave receiver state
+ twi_releaseBus();
+ break;
+ case TW_SR_DATA_NACK: // data received, returned nack
+ case TW_SR_GCALL_DATA_NACK: // data received generally, returned nack
+ // nack back at master
+ twi_reply(0);
+ break;
+
+ // Slave Transmitter
+ case TW_ST_SLA_ACK: // addressed, returned ack
+ case TW_ST_ARB_LOST_SLA_ACK: // arbitration lost, returned ack
+ // enter slave transmitter mode
+ twi_state = TWI_STX;
+ // ready the tx buffer index for iteration
+ twi_txBufferIndex = 0;
+ // set tx buffer length to be zero, to verify if user changes it
+ twi_txBufferLength = 0;
+ // request for txBuffer to be filled and length to be set
+ // note: user must call twi_transmit(bytes, length) to do this
+ twi_onSlaveTransmit();
+ // if they didn't change buffer & length, initialize it
+ if(0 == twi_txBufferLength){
+ twi_txBufferLength = 1;
+ twi_txBuffer[0] = 0x00;
+ }
+ // transmit first byte from buffer, fall
+ case TW_ST_DATA_ACK: // byte sent, ack returned
+ // copy data to output register
+ TWDR = twi_txBuffer[twi_txBufferIndex++];
+ // if there is more to send, ack, otherwise nack
+ if(twi_txBufferIndex < twi_txBufferLength){
+ twi_reply(1);
+ }else{
+ twi_reply(0);
+ }
+ break;
+ case TW_ST_DATA_NACK: // received nack, we are done
+ case TW_ST_LAST_DATA: // received ack, but we are done already!
+ // ack future responses
+ twi_reply(1);
+ // leave slave receiver state
+ twi_state = TWI_READY;
+ break;
+
+ // All
+ case TW_NO_INFO: // no state information
+ break;
+ case TW_BUS_ERROR: // bus error, illegal stop/start
+ twi_error = TW_BUS_ERROR;
+ twi_stop();
+ break;
+ }
+}
+
diff --git a/libraries/Wire/utility/twi.h b/libraries/Wire/utility/twi.h
new file mode 100755
index 0000000..1258d8d
--- /dev/null
+++ b/libraries/Wire/utility/twi.h
@@ -0,0 +1,57 @@
+/*
+ twi.h - TWI/I2C library for Wiring & Arduino
+ Copyright (c) 2006 Nicholas Zambetti. All right reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+*/
+
+#ifndef twi_h
+#define twi_h
+
+ #include <inttypes.h>
+
+ //#define ATMEGA8
+
+ #ifndef CPU_FREQ
+ #define CPU_FREQ 16000000L
+ #endif
+
+ #ifndef TWI_FREQ
+ #define TWI_FREQ 100000L
+ #endif
+
+ #ifndef TWI_BUFFER_LENGTH
+ #define TWI_BUFFER_LENGTH 32
+ #endif
+
+ #define TWI_READY 0
+ #define TWI_MRX 1
+ #define TWI_MTX 2
+ #define TWI_SRX 3
+ #define TWI_STX 4
+
+ void twi_init(void);
+ void twi_setAddress(uint8_t);
+ uint8_t twi_readFrom(uint8_t, uint8_t*, uint8_t);
+ uint8_t twi_writeTo(uint8_t, uint8_t*, uint8_t, uint8_t);
+ uint8_t twi_transmit(uint8_t*, uint8_t);
+ void twi_attachSlaveRxEvent( void (*)(uint8_t*, int) );
+ void twi_attachSlaveTxEvent( void (*)(void) );
+ void twi_reply(uint8_t);
+ void twi_stop(void);
+ void twi_releaseBus(void);
+
+#endif
+
diff --git a/license.txt b/license.txt
new file mode 100644
index 0000000..fe2dac0
--- /dev/null
+++ b/license.txt
@@ -0,0 +1,753 @@
+this file includes licensing information for parts of arduino.
+
+first, the gnu general public license, which covers the main body
+of the processing/arduino code (in general, all the stuff inside the 'app'
+and 'core' subfolders).
+
+next, the gnu lesser general public license that covers the arduino core
+and libraries.
+
+
+.....................................................................
+
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+Everyone is permitted to copy and distribute verbatim copies
+of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+
+
+.....................................................................
+
+ GNU LESSER GENERAL PUBLIC LICENSE
+ Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL. It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+ This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it. You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+ When we speak of free software, we are referring to freedom of use,
+not price. Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+ To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights. These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+ For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you. You must make sure that they, too, receive or can get the source
+code. If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it. And you must show them these terms so they know their rights.
+
+ We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+ To protect each distributor, we want to make it very clear that
+there is no warranty for the free library. Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+ Finally, software patents pose a constant threat to the existence of
+any free program. We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder. Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+ Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License. This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License. We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+ When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library. The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom. The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+ We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License. It also provides other free software developers Less
+of an advantage over competing non-free programs. These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries. However, the Lesser license provides advantages in certain
+special circumstances.
+
+ For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard. To achieve this, non-free programs must be
+allowed to use the library. A more frequent case is that a free
+library does the same job as widely used non-free libraries. In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+ In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software. For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+ Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+ The precise terms and conditions for copying, distribution and
+modification follow. Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library". The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+ GNU LESSER GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+ A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+ The "Library", below, refers to any such software library or work
+which has been distributed under these terms. A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language. (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+ "Source code" for a work means the preferred form of the work for
+making modifications to it. For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+ Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it). Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+ 1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+ You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+ 2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) The modified work must itself be a software library.
+
+ b) You must cause the files modified to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ c) You must cause the whole of the work to be licensed at no
+ charge to all third parties under the terms of this License.
+
+ d) If a facility in the modified Library refers to a function or a
+ table of data to be supplied by an application program that uses
+ the facility, other than as an argument passed when the facility
+ is invoked, then you must make a good faith effort to ensure that,
+ in the event an application does not supply such function or
+ table, the facility still operates, and performs whatever part of
+ its purpose remains meaningful.
+
+ (For example, a function in a library to compute square roots has
+ a purpose that is entirely well-defined independent of the
+ application. Therefore, Subsection 2d requires that any
+ application-supplied function or table used by this function must
+ be optional: if the application does not supply it, the square
+ root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library. To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License. (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.) Do not make any other change in
+these notices.
+
+ Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+ This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+ 4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+ If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library". Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+ However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library". The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+ When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library. The
+threshold for this to be true is not precisely defined by law.
+
+ If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work. (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+ Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+ 6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+ You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License. You must supply a copy of this License. If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License. Also, you must do one
+of these things:
+
+ a) Accompany the work with the complete corresponding
+ machine-readable source code for the Library including whatever
+ changes were used in the work (which must be distributed under
+ Sections 1 and 2 above); and, if the work is an executable linked
+ with the Library, with the complete machine-readable "work that
+ uses the Library", as object code and/or source code, so that the
+ user can modify the Library and then relink to produce a modified
+ executable containing the modified Library. (It is understood
+ that the user who changes the contents of definitions files in the
+ Library will not necessarily be able to recompile the application
+ to use the modified definitions.)
+
+ b) Use a suitable shared library mechanism for linking with the
+ Library. A suitable mechanism is one that (1) uses at run time a
+ copy of the library already present on the user's computer system,
+ rather than copying library functions into the executable, and (2)
+ will operate properly with a modified version of the library, if
+ the user installs one, as long as the modified version is
+ interface-compatible with the version that the work was made with.
+
+ c) Accompany the work with a written offer, valid for at
+ least three years, to give the same user the materials
+ specified in Subsection 6a, above, for a charge no more
+ than the cost of performing this distribution.
+
+ d) If distribution of the work is made by offering access to copy
+ from a designated place, offer equivalent access to copy the above
+ specified materials from the same place.
+
+ e) Verify that the user has already received a copy of these
+ materials or that you have already sent this user a copy.
+
+ For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it. However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+ It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system. Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+ 7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+ a) Accompany the combined library with a copy of the same work
+ based on the Library, uncombined with any other library
+ facilities. This must be distributed under the terms of the
+ Sections above.
+
+ b) Give prominent notice with the combined library of the fact
+ that part of it is a work based on the Library, and explaining
+ where to find the accompanying uncombined form of the same work.
+
+ 8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License. Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License. However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+ 9. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Library or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+ 10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+ 11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all. For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded. In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+ 13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation. If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+ 14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission. For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this. Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+ NO WARRANTY
+
+ 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
diff --git a/readme.txt b/readme.txt
new file mode 100644
index 0000000..0d70830
--- /dev/null
+++ b/readme.txt
@@ -0,0 +1,42 @@
+Arduino is an open-source physical computing platform based on a simple i/o
+board and a development environment that implements the Processing/Wiring
+language. Arduino can be used to develop stand-alone interactive objects or
+can be connected to software on your computer (e.g. Flash, Processing, MaxMSP).
+The boards can be assembled by hand or purchased preassembled; the open-source
+IDE can be downloaded for free.
+
+For more information, see the website at: http://www.arduino.cc/
+or the forums at: http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl
+
+To report a bug or a make a suggestions, go to:
+[hardware] http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?board=hwbugs
+[software] http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?board=swbugs
+
+INSTALLATION
+Detailed instructions are in reference/Guide_Windows.html and
+reference/Guide_MacOSX.html. For Linux, see the Arduino playground:
+http://www.arduino.cc/playground/Learning/Linux
+
+If you are using a USB Arduino, you will need to install the drivers for the
+FTDI chip on the board. These can be found in the drivers/ directory.
+
+* On Windows, plug in the Arduino board and point the Windows Add Hardware
+ wizard to the drivers/FTDI USB Drivers sub-directory of the Arduino
+ application directory.
+
+* On the Mac, install the FTDIUSBSerialDriver_10_4_10_5_10_6.mpkg package.
+
+* On Linux, drivers are included in kernel versions 2.4.20 or greater.
+
+CREDITS
+Arduino is an open source project, supported by many.
+
+The Arduino team is composed of Massimo Banzi, David Cuartielles, Tom Igoe,
+Gianluca Martino, and David A. Mellis.
+
+Arduino uses the GNU avr-gcc toolchain, avrdude, avr-libc, and code from
+Processing and Wiring.
+
+Icon designed by ToDo: http://www.todo.to.it/
+"About" image created by Thomas Glaser (envis precisely).
+
