| #******************************************************* |
| # |
| # Connect to J-Link and debug application in flash. |
| # |
| |
| # define 'reset' command |
| define reset |
| |
| # Connect to the J-Link gdb server |
| target remote localhost:2331 |
| |
| # Reset the chip to get to a known state |
| monitor reset |
| |
| # Select flash device (Should be AT91SAM4S16C, but it is not available now) |
| monitor flash device = AT91SAM4S16C |
| # Enable flash download and flash breakpoints |
| monitor flash download = 1 |
| |
| # Load the program |
| load |
| |
| # Reset peripheral (RSTC_CR) |
| set *0x400e1400 = 0xA5000004 |
| |
| # Initializing PC and stack pointer |
| mon reg sp=(0x400000) |
| mon reg pc=(0x400004) |
| info reg |
| |
| # end of 'reset' command |
| end |
