blob: daf475b627b5d933b98958180a17f616bf666283 [file] [log] [blame]
/* ----------------------------------------------------------------------------
* SAM Software Package License
* ----------------------------------------------------------------------------
* Copyright (c) 2012, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following condition is met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#ifndef _SAM3XA_USART1_INSTANCE_
#define _SAM3XA_USART1_INSTANCE_
/* ========== Register definition for USART1 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_USART1_CR (0x4009C000U) /**< \brief (USART1) Control Register */
#define REG_USART1_MR (0x4009C004U) /**< \brief (USART1) Mode Register */
#define REG_USART1_IER (0x4009C008U) /**< \brief (USART1) Interrupt Enable Register */
#define REG_USART1_IDR (0x4009C00CU) /**< \brief (USART1) Interrupt Disable Register */
#define REG_USART1_IMR (0x4009C010U) /**< \brief (USART1) Interrupt Mask Register */
#define REG_USART1_CSR (0x4009C014U) /**< \brief (USART1) Channel Status Register */
#define REG_USART1_RHR (0x4009C018U) /**< \brief (USART1) Receiver Holding Register */
#define REG_USART1_THR (0x4009C01CU) /**< \brief (USART1) Transmitter Holding Register */
#define REG_USART1_BRGR (0x4009C020U) /**< \brief (USART1) Baud Rate Generator Register */
#define REG_USART1_RTOR (0x4009C024U) /**< \brief (USART1) Receiver Time-out Register */
#define REG_USART1_TTGR (0x4009C028U) /**< \brief (USART1) Transmitter Timeguard Register */
#define REG_USART1_FIDI (0x4009C040U) /**< \brief (USART1) FI DI Ratio Register */
#define REG_USART1_NER (0x4009C044U) /**< \brief (USART1) Number of Errors Register */
#define REG_USART1_IF (0x4009C04CU) /**< \brief (USART1) IrDA Filter Register */
#define REG_USART1_MAN (0x4009C050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
#define REG_USART1_LINMR (0x4009C054U) /**< \brief (USART1) LIN Mode Register */
#define REG_USART1_LINIR (0x4009C058U) /**< \brief (USART1) LIN Identifier Register */
#define REG_USART1_WPMR (0x4009C0E4U) /**< \brief (USART1) Write Protect Mode Register */
#define REG_USART1_WPSR (0x4009C0E8U) /**< \brief (USART1) Write Protect Status Register */
#define REG_USART1_RPR (0x4009C100U) /**< \brief (USART1) Receive Pointer Register */
#define REG_USART1_RCR (0x4009C104U) /**< \brief (USART1) Receive Counter Register */
#define REG_USART1_TPR (0x4009C108U) /**< \brief (USART1) Transmit Pointer Register */
#define REG_USART1_TCR (0x4009C10CU) /**< \brief (USART1) Transmit Counter Register */
#define REG_USART1_RNPR (0x4009C110U) /**< \brief (USART1) Receive Next Pointer Register */
#define REG_USART1_RNCR (0x4009C114U) /**< \brief (USART1) Receive Next Counter Register */
#define REG_USART1_TNPR (0x4009C118U) /**< \brief (USART1) Transmit Next Pointer Register */
#define REG_USART1_TNCR (0x4009C11CU) /**< \brief (USART1) Transmit Next Counter Register */
#define REG_USART1_PTCR (0x4009C120U) /**< \brief (USART1) Transfer Control Register */
#define REG_USART1_PTSR (0x4009C124U) /**< \brief (USART1) Transfer Status Register */
#else
#define REG_USART1_CR (*(WoReg*)0x4009C000U) /**< \brief (USART1) Control Register */
#define REG_USART1_MR (*(RwReg*)0x4009C004U) /**< \brief (USART1) Mode Register */
#define REG_USART1_IER (*(WoReg*)0x4009C008U) /**< \brief (USART1) Interrupt Enable Register */
#define REG_USART1_IDR (*(WoReg*)0x4009C00CU) /**< \brief (USART1) Interrupt Disable Register */
#define REG_USART1_IMR (*(RoReg*)0x4009C010U) /**< \brief (USART1) Interrupt Mask Register */
#define REG_USART1_CSR (*(RoReg*)0x4009C014U) /**< \brief (USART1) Channel Status Register */
#define REG_USART1_RHR (*(RoReg*)0x4009C018U) /**< \brief (USART1) Receiver Holding Register */
#define REG_USART1_THR (*(WoReg*)0x4009C01CU) /**< \brief (USART1) Transmitter Holding Register */
#define REG_USART1_BRGR (*(RwReg*)0x4009C020U) /**< \brief (USART1) Baud Rate Generator Register */
#define REG_USART1_RTOR (*(RwReg*)0x4009C024U) /**< \brief (USART1) Receiver Time-out Register */
#define REG_USART1_TTGR (*(RwReg*)0x4009C028U) /**< \brief (USART1) Transmitter Timeguard Register */
#define REG_USART1_FIDI (*(RwReg*)0x4009C040U) /**< \brief (USART1) FI DI Ratio Register */
#define REG_USART1_NER (*(RoReg*)0x4009C044U) /**< \brief (USART1) Number of Errors Register */
#define REG_USART1_IF (*(RwReg*)0x4009C04CU) /**< \brief (USART1) IrDA Filter Register */
#define REG_USART1_MAN (*(RwReg*)0x4009C050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
#define REG_USART1_LINMR (*(RwReg*)0x4009C054U) /**< \brief (USART1) LIN Mode Register */
#define REG_USART1_LINIR (*(RwReg*)0x4009C058U) /**< \brief (USART1) LIN Identifier Register */
#define REG_USART1_WPMR (*(RwReg*)0x4009C0E4U) /**< \brief (USART1) Write Protect Mode Register */
#define REG_USART1_WPSR (*(RoReg*)0x4009C0E8U) /**< \brief (USART1) Write Protect Status Register */
#define REG_USART1_RPR (*(RwReg*)0x4009C100U) /**< \brief (USART1) Receive Pointer Register */
#define REG_USART1_RCR (*(RwReg*)0x4009C104U) /**< \brief (USART1) Receive Counter Register */
#define REG_USART1_TPR (*(RwReg*)0x4009C108U) /**< \brief (USART1) Transmit Pointer Register */
#define REG_USART1_TCR (*(RwReg*)0x4009C10CU) /**< \brief (USART1) Transmit Counter Register */
#define REG_USART1_RNPR (*(RwReg*)0x4009C110U) /**< \brief (USART1) Receive Next Pointer Register */
#define REG_USART1_RNCR (*(RwReg*)0x4009C114U) /**< \brief (USART1) Receive Next Counter Register */
#define REG_USART1_TNPR (*(RwReg*)0x4009C118U) /**< \brief (USART1) Transmit Next Pointer Register */
#define REG_USART1_TNCR (*(RwReg*)0x4009C11CU) /**< \brief (USART1) Transmit Next Counter Register */
#define REG_USART1_PTCR (*(WoReg*)0x4009C120U) /**< \brief (USART1) Transfer Control Register */
#define REG_USART1_PTSR (*(RoReg*)0x4009C124U) /**< \brief (USART1) Transfer Status Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#endif /* _SAM3XA_USART1_INSTANCE_ */