| /* ---------------------------------------------------------------------------- |
| * SAM Software Package License |
| * ---------------------------------------------------------------------------- |
| * Copyright (c) 2012, Atmel Corporation |
| * |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following condition is met: |
| * |
| * - Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the disclaimer below. |
| * |
| * Atmel's name may not be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE |
| * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, |
| * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, |
| * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ---------------------------------------------------------------------------- |
| */ |
| |
| #ifndef _SAM3S8_USART2_INSTANCE_ |
| #define _SAM3S8_USART2_INSTANCE_ |
| |
| /* ========== Register definition for USART2 peripheral ========== */ |
| #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) |
| #define REG_USART2_CR (0x4002C000U) /**< \brief (USART2) Control Register */ |
| #define REG_USART2_MR (0x4002C004U) /**< \brief (USART2) Mode Register */ |
| #define REG_USART2_IER (0x4002C008U) /**< \brief (USART2) Interrupt Enable Register */ |
| #define REG_USART2_IDR (0x4002C00CU) /**< \brief (USART2) Interrupt Disable Register */ |
| #define REG_USART2_IMR (0x4002C010U) /**< \brief (USART2) Interrupt Mask Register */ |
| #define REG_USART2_CSR (0x4002C014U) /**< \brief (USART2) Channel Status Register */ |
| #define REG_USART2_RHR (0x4002C018U) /**< \brief (USART2) Receiver Holding Register */ |
| #define REG_USART2_THR (0x4002C01CU) /**< \brief (USART2) Transmitter Holding Register */ |
| #define REG_USART2_BRGR (0x4002C020U) /**< \brief (USART2) Baud Rate Generator Register */ |
| #define REG_USART2_RTOR (0x4002C024U) /**< \brief (USART2) Receiver Time-out Register */ |
| #define REG_USART2_TTGR (0x4002C028U) /**< \brief (USART2) Transmitter Timeguard Register */ |
| #define REG_USART2_FIDI (0x4002C040U) /**< \brief (USART2) FI DI Ratio Register */ |
| #define REG_USART2_NER (0x4002C044U) /**< \brief (USART2) Number of Errors Register */ |
| #define REG_USART2_IF (0x4002C04CU) /**< \brief (USART2) IrDA Filter Register */ |
| #define REG_USART2_MAN (0x4002C050U) /**< \brief (USART2) Manchester Encoder Decoder Register */ |
| #define REG_USART2_WPMR (0x4002C0E4U) /**< \brief (USART2) Write Protect Mode Register */ |
| #define REG_USART2_WPSR (0x4002C0E8U) /**< \brief (USART2) Write Protect Status Register */ |
| #define REG_USART2_VERSION (0x4002C0FCU) /**< \brief (USART2) Version Register */ |
| #define REG_USART2_RPR (0x4002C100U) /**< \brief (USART2) Receive Pointer Register */ |
| #define REG_USART2_RCR (0x4002C104U) /**< \brief (USART2) Receive Counter Register */ |
| #define REG_USART2_TPR (0x4002C108U) /**< \brief (USART2) Transmit Pointer Register */ |
| #define REG_USART2_TCR (0x4002C10CU) /**< \brief (USART2) Transmit Counter Register */ |
| #define REG_USART2_RNPR (0x4002C110U) /**< \brief (USART2) Receive Next Pointer Register */ |
| #define REG_USART2_RNCR (0x4002C114U) /**< \brief (USART2) Receive Next Counter Register */ |
| #define REG_USART2_TNPR (0x4002C118U) /**< \brief (USART2) Transmit Next Pointer Register */ |
| #define REG_USART2_TNCR (0x4002C11CU) /**< \brief (USART2) Transmit Next Counter Register */ |
| #define REG_USART2_PTCR (0x4002C120U) /**< \brief (USART2) Transfer Control Register */ |
| #define REG_USART2_PTSR (0x4002C124U) /**< \brief (USART2) Transfer Status Register */ |
| #else |
| #define REG_USART2_CR (*(WoReg*)0x4002C000U) /**< \brief (USART2) Control Register */ |
| #define REG_USART2_MR (*(RwReg*)0x4002C004U) /**< \brief (USART2) Mode Register */ |
| #define REG_USART2_IER (*(WoReg*)0x4002C008U) /**< \brief (USART2) Interrupt Enable Register */ |
| #define REG_USART2_IDR (*(WoReg*)0x4002C00CU) /**< \brief (USART2) Interrupt Disable Register */ |
| #define REG_USART2_IMR (*(RoReg*)0x4002C010U) /**< \brief (USART2) Interrupt Mask Register */ |
| #define REG_USART2_CSR (*(RoReg*)0x4002C014U) /**< \brief (USART2) Channel Status Register */ |
| #define REG_USART2_RHR (*(RoReg*)0x4002C018U) /**< \brief (USART2) Receiver Holding Register */ |
| #define REG_USART2_THR (*(WoReg*)0x4002C01CU) /**< \brief (USART2) Transmitter Holding Register */ |
| #define REG_USART2_BRGR (*(RwReg*)0x4002C020U) /**< \brief (USART2) Baud Rate Generator Register */ |
| #define REG_USART2_RTOR (*(RwReg*)0x4002C024U) /**< \brief (USART2) Receiver Time-out Register */ |
| #define REG_USART2_TTGR (*(RwReg*)0x4002C028U) /**< \brief (USART2) Transmitter Timeguard Register */ |
| #define REG_USART2_FIDI (*(RwReg*)0x4002C040U) /**< \brief (USART2) FI DI Ratio Register */ |
| #define REG_USART2_NER (*(RoReg*)0x4002C044U) /**< \brief (USART2) Number of Errors Register */ |
| #define REG_USART2_IF (*(RwReg*)0x4002C04CU) /**< \brief (USART2) IrDA Filter Register */ |
| #define REG_USART2_MAN (*(RwReg*)0x4002C050U) /**< \brief (USART2) Manchester Encoder Decoder Register */ |
| #define REG_USART2_WPMR (*(RwReg*)0x4002C0E4U) /**< \brief (USART2) Write Protect Mode Register */ |
| #define REG_USART2_WPSR (*(RoReg*)0x4002C0E8U) /**< \brief (USART2) Write Protect Status Register */ |
| #define REG_USART2_VERSION (*(RoReg*)0x4002C0FCU) /**< \brief (USART2) Version Register */ |
| #define REG_USART2_RPR (*(RwReg*)0x4002C100U) /**< \brief (USART2) Receive Pointer Register */ |
| #define REG_USART2_RCR (*(RwReg*)0x4002C104U) /**< \brief (USART2) Receive Counter Register */ |
| #define REG_USART2_TPR (*(RwReg*)0x4002C108U) /**< \brief (USART2) Transmit Pointer Register */ |
| #define REG_USART2_TCR (*(RwReg*)0x4002C10CU) /**< \brief (USART2) Transmit Counter Register */ |
| #define REG_USART2_RNPR (*(RwReg*)0x4002C110U) /**< \brief (USART2) Receive Next Pointer Register */ |
| #define REG_USART2_RNCR (*(RwReg*)0x4002C114U) /**< \brief (USART2) Receive Next Counter Register */ |
| #define REG_USART2_TNPR (*(RwReg*)0x4002C118U) /**< \brief (USART2) Transmit Next Pointer Register */ |
| #define REG_USART2_TNCR (*(RwReg*)0x4002C11CU) /**< \brief (USART2) Transmit Next Counter Register */ |
| #define REG_USART2_PTCR (*(WoReg*)0x4002C120U) /**< \brief (USART2) Transfer Control Register */ |
| #define REG_USART2_PTSR (*(RoReg*)0x4002C124U) /**< \brief (USART2) Transfer Status Register */ |
| #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ |
| |
| #endif /* _SAM3S8_USART2_INSTANCE_ */ |
