hardware/arduino/sam/system/CMSIS/CMSIS/DSP_Lib/Source/BasicMathFunctions/arm_negate_q15.c

/* ----------------------------------------------------------------------   
* Copyright (C) 2010 ARM Limited. All rights reserved.   
*   
* $Date:        15. July 2011  
* $Revision: 	V1.0.10  
*   
* Project: 	    CMSIS DSP Library   
* Title:		arm_negate_q15.c   
*   
* Description:	Negates Q15 vectors.   
*   
* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
*  
* Version 1.0.10 2011/7/15 
*    Big Endian support added and Merged M0 and M3/M4 Source code.  
*   
* Version 1.0.3 2010/11/29  
*    Re-organized the CMSIS folders and updated documentation.   
*    
* Version 1.0.2 2010/11/11   
*    Documentation updated.    
*   
* Version 1.0.1 2010/10/05    
*    Production release and review comments incorporated.   
*   
* Version 1.0.0 2010/09/20    
*    Production release and review comments incorporated.   
*   
* Version 0.0.7  2010/06/10    
*    Misra-C changes done   
* -------------------------------------------------------------------- */

#include "arm_math.h"

/**   
 * @ingroup groupMath   
 */

/**   
 * @addtogroup negate   
 * @{   
 */

/**   
 * @brief  Negates the elements of a Q15 vector.   
 * @param[in]  *pSrc points to the input vector   
 * @param[out]  *pDst points to the output vector   
 * @param[in]  blockSize number of samples in the vector   
 * @return none.   
 *   
 * <b>Scaling and Overflow Behavior:</b>   
 * \par   
 * The function uses saturating arithmetic.   
 * The Q15 value -1 (0x8000) will be saturated to the maximum allowable positive value 0x7FFF.   
 */

void arm_negate_q15(
  q15_t * pSrc,
  q15_t * pDst,
  uint32_t blockSize)
{
  uint32_t blkCnt;                               /* loop counter */


#ifndef ARM_MATH_CM0

/* Run the below code for Cortex-M4 and Cortex-M3 */

  q15_t in1, in2;                                /* Temporary variables */


  /*loop Unrolling */
  blkCnt = blockSize >> 2u;

  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.   
   ** a second loop below computes the remaining 1 to 3 samples. */
  while(blkCnt > 0u)
  {
    /* C = -A */
    /* Read two inputs */
    in1 = *pSrc++;
    in2 = *pSrc++;
    /* Negate and then store the results in the destination buffer by packing. */

#ifndef  ARM_MATH_BIG_ENDIAN

    *__SIMD32(pDst)++ = __PKHBT(__SSAT(-in1, 16), __SSAT(-in2, 16), 16);

#else

    *__SIMD32(pDst)++ = __PKHBT(__SSAT(-in2, 16), __SSAT(-in1, 16), 16);

#endif /* #ifndef  ARM_MATH_BIG_ENDIAN    */

    in1 = *pSrc++;
    in2 = *pSrc++;

#ifndef  ARM_MATH_BIG_ENDIAN

    *__SIMD32(pDst)++ = __PKHBT(__SSAT(-in1, 16), __SSAT(-in2, 16), 16);

#else


    *__SIMD32(pDst)++ = __PKHBT(__SSAT(-in2, 16), __SSAT(-in1, 16), 16);

#endif /* #ifndef  ARM_MATH_BIG_ENDIAN    */

    /* Decrement the loop counter */
    blkCnt--;
  }

  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.   
   ** No loop unrolling is used. */
  blkCnt = blockSize % 0x4u;

#else

  /* Run the below code for Cortex-M0 */

  /* Initialize blkCnt with number of samples */
  blkCnt = blockSize;

#endif /* #ifndef ARM_MATH_CM0 */

  while(blkCnt > 0u)
  {
    /* C = -A */
    /* Negate and then store the result in the destination buffer. */
    *pDst++ = __SSAT(-*pSrc++, 16);

    /* Decrement the loop counter */
    blkCnt--;
  }

}

/**   
 * @} end of negate group   
 */