| /* |
| Multiple tone player |
| |
| Plays multiple tones on multiple pins in sequence |
| |
| circuit: |
| * 3 8-ohm speaker on digital pins 6, 7, and 11 |
| |
| created 8 March 2010 |
| by Tom Igoe |
| based on a snippet from Greg Borenstein |
| |
| This example code is in the public domain. |
| |
| http://arduino.cc/en/Tutorial/Tone4 |
| |
| */ |
| |
| void setup() { |
| |
| } |
| |
| void loop() { |
| // turn off tone function for pin 11: |
| noTone(11); |
| // play a note on pin 6 for 200 ms: |
| tone(6, 440, 200); |
| delay(200); |
| |
| // turn off tone function for pin 6: |
| noTone(6); |
| // play a note on pin 7 for 500 ms: |
| tone(7, 494, 500); |
| delay(500); |
| |
| // turn off tone function for pin 7: |
| noTone(7); |
| // play a note on pin 11 for 500 ms: |
| tone(11, 523, 300); |
| delay(300); |
| |
| } |