| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "apr_arch_file_io.h" |
| #include "apr_strings.h" |
| #include "apr_portable.h" |
| #include "apr_thread_mutex.h" |
| #include "apr_arch_inherit.h" |
| |
| static apr_status_t file_dup(apr_file_t **new_file, |
| apr_file_t *old_file, apr_pool_t *p, |
| int which_dup) |
| { |
| int rv; |
| |
| if (which_dup == 2) { |
| if ((*new_file) == NULL) { |
| /* We can't dup2 unless we have a valid new_file */ |
| return APR_EINVAL; |
| } |
| rv = dup2(old_file->filedes, (*new_file)->filedes); |
| } else { |
| rv = dup(old_file->filedes); |
| } |
| |
| if (rv == -1) |
| return errno; |
| |
| if (which_dup == 1) { |
| (*new_file) = (apr_file_t *)apr_pcalloc(p, sizeof(apr_file_t)); |
| (*new_file)->pool = p; |
| (*new_file)->filedes = rv; |
| } |
| |
| (*new_file)->fname = apr_pstrdup(p, old_file->fname); |
| (*new_file)->buffered = old_file->buffered; |
| |
| /* If the existing socket in a dup2 is already buffered, we |
| * have an existing and valid (hopefully) mutex, so we don't |
| * want to create it again as we could leak! |
| */ |
| #if APR_HAS_THREADS |
| if ((*new_file)->buffered && !(*new_file)->thlock && old_file->thlock) { |
| apr_thread_mutex_create(&((*new_file)->thlock), |
| APR_THREAD_MUTEX_DEFAULT, p); |
| } |
| #endif |
| /* As above, only create the buffer if we haven't already |
| * got one. |
| */ |
| if ((*new_file)->buffered && !(*new_file)->buffer) { |
| (*new_file)->buffer = apr_palloc(p, APR_FILE_BUFSIZE); |
| } |
| |
| /* this is the way dup() works */ |
| (*new_file)->blocking = old_file->blocking; |
| |
| /* make sure unget behavior is consistent */ |
| (*new_file)->ungetchar = old_file->ungetchar; |
| |
| /* apr_file_dup2() retains the original cleanup, reflecting |
| * the existing inherit and nocleanup flags. This means, |
| * that apr_file_dup2() cannot be called against an apr_file_t |
| * already closed with apr_file_close, because the expected |
| * cleanup was already killed. |
| */ |
| if (which_dup == 2) { |
| return APR_SUCCESS; |
| } |
| |
| /* apr_file_dup() retains all old_file flags with the exceptions |
| * of APR_INHERIT and APR_FILE_NOCLEANUP. |
| * The user must call apr_file_inherit_set() on the dupped |
| * apr_file_t when desired. |
| */ |
| (*new_file)->flags = old_file->flags |
| & ~(APR_INHERIT | APR_FILE_NOCLEANUP); |
| |
| apr_pool_cleanup_register((*new_file)->pool, (void *)(*new_file), |
| apr_unix_file_cleanup, |
| apr_unix_child_file_cleanup); |
| #ifndef WAITIO_USES_POLL |
| /* Start out with no pollset. apr_wait_for_io_or_timeout() will |
| * initialize the pollset if needed. |
| */ |
| (*new_file)->pollset = NULL; |
| #endif |
| return APR_SUCCESS; |
| } |
| |
| APR_DECLARE(apr_status_t) apr_file_dup(apr_file_t **new_file, |
| apr_file_t *old_file, apr_pool_t *p) |
| { |
| return file_dup(new_file, old_file, p, 1); |
| } |
| |
| APR_DECLARE(apr_status_t) apr_file_dup2(apr_file_t *new_file, |
| apr_file_t *old_file, apr_pool_t *p) |
| { |
| return file_dup(&new_file, old_file, p, 2); |
| } |
| |
| APR_DECLARE(apr_status_t) apr_file_setaside(apr_file_t **new_file, |
| apr_file_t *old_file, |
| apr_pool_t *p) |
| { |
| *new_file = (apr_file_t *)apr_palloc(p, sizeof(apr_file_t)); |
| memcpy(*new_file, old_file, sizeof(apr_file_t)); |
| (*new_file)->pool = p; |
| if (old_file->buffered) { |
| (*new_file)->buffer = apr_palloc(p, APR_FILE_BUFSIZE); |
| if (old_file->direction == 1) { |
| memcpy((*new_file)->buffer, old_file->buffer, old_file->bufpos); |
| } |
| else { |
| memcpy((*new_file)->buffer, old_file->buffer, old_file->dataRead); |
| } |
| #if APR_HAS_THREADS |
| if (old_file->thlock) { |
| apr_thread_mutex_create(&((*new_file)->thlock), |
| APR_THREAD_MUTEX_DEFAULT, p); |
| apr_thread_mutex_destroy(old_file->thlock); |
| } |
| #endif /* APR_HAS_THREADS */ |
| } |
| if (old_file->fname) { |
| (*new_file)->fname = apr_pstrdup(p, old_file->fname); |
| } |
| if (!(old_file->flags & APR_FILE_NOCLEANUP)) { |
| apr_pool_cleanup_register(p, (void *)(*new_file), |
| apr_unix_file_cleanup, |
| ((*new_file)->flags & APR_INHERIT) |
| ? apr_pool_cleanup_null |
| : apr_unix_child_file_cleanup); |
| } |
| |
| old_file->filedes = -1; |
| apr_pool_cleanup_kill(old_file->pool, (void *)old_file, |
| apr_unix_file_cleanup); |
| #ifndef WAITIO_USES_POLL |
| (*new_file)->pollset = NULL; |
| #endif |
| return APR_SUCCESS; |
| } |