en/security/selinux/customize.html

page.title=Customizing SELinux
@jd:body

<!--
    Copyright 2015 The Android Open Source Project

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
-->
<div id="qv-wrapper">
  <div id="qv">
    <h2>In this document</h2>
    <ol id="auto-toc">
    </ol>
  </div>
</div>

<p>Once you've integrated this base level of functionality and thoroughly analyzed
the results, you may add your own policy settings to cover your customizations
to the Android operating system. Of course, these policies must still meet the <a href="{@docRoot}compatibility/index.html">Android Compatibility program</a> requirements and not remove the default SELinux settings.</p>

<p>Manufacturers should not remove existing security settings. Otherwise, they
risk breaking the Android SELinux implementation and the applications it
governs. This includes third-party applications that will likely need to be
improved to be compliant and operational. Applications must require no
modification to continue functioning on SELinux-enabled devices.</p>

<p>When embarking upon customizing SELinux, manufacturers should remember to:</p>

<ul>
  <li>Write SELinux policy for all new daemons
  <li>Use predefined domains whenever appropriate
  <li>Assign a domain to any process spawned as an <code>init</code> service
  <li>Become familiar with the macros before writing policy
  <li>Submit changes to core policy to AOSP
</ul>

<p>And not to:</p>

<ul>
  <li>Create incompatible policy
  <li>Allow end user policy customization
  <li>Allow MDM policy customizations
  <li>Scare users with policy violations
  <li>Add backdoors
</ul>

<p>See the <em>Kernel Security Features</em> section of the <a href="{@docRoot}compatibility/android-cdd.pdf">Android Compatibility Definition document</a> for specific requirements.</p>

<p>SELinux uses a whitelist approach, meaning all access must be explicitly
allowed in policy in order to be granted. Since Android's default SELinux
policy already supports the Android Open Source Project, OEMs are not required
to modify SELinux settings in any way. If they do customize SELinux settings,
they should take great care not to break existing applications. Here is how we
recommend proceeding:</p>

<ol>
  <li>Use the <a href="https://android.googlesource.com/kernel/common/">latest Android kernel</a>.
  <li>Adopt the <a href="http://en.wikipedia.org/wiki/Principle_of_least_privilege">principle of least privilege</a>.
  <li>Address only your own additions to Android. The default policy works with the <a href="https://android.googlesource.com/">Android Open Source Project</a> codebase automatically.
  <li>Compartmentalize software components into modules that conduct singular tasks.
  <li>Create SELinux policies that isolate those tasks from unrelated functions.
  <li>Put those policies in *.te files (the extension for SELinux policy source
files) within the <code>/device/manufacturer/device-name/sepolicy</code> directory and use
<code>BOARD_SEPOLICY</code> variables to include them in your build.
  <li>Make new domains permissive initially. This is done by
using a permissive declaration in the domain's .te file.
  <li>Analyze results and refine your domain definitions.
  <li>Remove the permissive declaration when no further denials appear in userdebug
builds.
</ol>

<p>Once integrated, OEM Android development should include a step to ensure
SELinux compatibility going forward. In an ideal software development process,
SELinux policy changes only when the software model changes and not the actual
implementation.</p>

<p>As device manufacturers begin to customize SELinux, they should first audit
their additions to Android. If they've added a component that conducts a new
function, the manufacturers will need to ensure the component meets the
security policy applied by Android, as well as any associated policy crafted by
the OEM, before turning on enforcing mode.</p>

<p>To prevent unnecessary issues, it is better to be overbroad and over-compatible
than too restrictive and incompatible, which results in broken device
functions. Conversely, if a manufacturer's changes will benefit others, it
should supply the modifications to the default SELinux policy as a <a href="{@docRoot}source/submit-patches.html">patch</a>. If the patch is applied to the default security policy, the manufacturer will no longer need to make this change with each new Android release.</p>

<h2 id=example_policy_statements>Example policy statements</h2>

<p>First, note SELinux is based upon the <a href="https://www.gnu.org/software/m4/manual/index.html">M4</a> computer language and therefore supports a variety of macros to save time.</p>

<p>In the following example, all domains are granted access to read from or write to <code>/dev/null</code> and read from <code>/dev/zero</code>.</p>

<pre>
# Allow read / write access to /dev/null
allow domain null_device:chr_file { getattr open read ioctl lock append write};

# Allow read-only access to /dev/zero
allow domain zero_device:chr_file { getattr open read ioctl lock };
</pre>


<p>This same statement can be written with SELinux <code>*_file_perms</code> macros (shorthand):</p>

<pre>
# Allow read / write access to /dev/null
allow domain null_device:chr_file rw_file_perms;

# Allow read-only access to /dev/zero
allow domain zero_device:chr_file r_file_perms;
</pre>

<h2 id=example_policy>Example policy</h2>

<p>Here is a complete example policy for DHCP, which we examine below:</p>

<pre>
type dhcp, domain;
permissive dhcp;
type dhcp_exec, exec_type, file_type;
type dhcp_data_file, file_type, data_file_type;

init_daemon_domain(dhcp)
net_domain(dhcp)

allow dhcp self:capability { setgid setuid net_admin net_raw net_bind_service
};
allow dhcp self:packet_socket create_socket_perms;
allow dhcp self:netlink_route_socket { create_socket_perms nlmsg_write };
allow dhcp shell_exec:file rx_file_perms;
allow dhcp system_file:file rx_file_perms;
# For /proc/sys/net/ipv4/conf/*/promote_secondaries
allow dhcp proc_net:file write;
allow dhcp system_prop:property_service set ;
unix_socket_connect(dhcp, property, init)

type_transition dhcp system_data_file:{ dir file } dhcp_data_file;
allow dhcp dhcp_data_file:dir create_dir_perms;
allow dhcp dhcp_data_file:file create_file_perms;

allow dhcp netd:fd use;
allow dhcp netd:fifo_file rw_file_perms;
allow dhcp netd:{ dgram_socket_class_set unix_stream_socket } { read write };
allow dhcp netd:{ netlink_kobject_uevent_socket netlink_route_socket
netlink_nflog_socket } { read write };
</pre>

<p>Let’s dissect the example:</p>

<p>In the first line, the type declaration, the DHCP daemon inherits from the base
security policy (<code>domain</code>). From the previous statement examples, we know DHCP can read from and write
to <code>/dev/null.</code></p>

<p>In the second line, DHCP is identified as a permissive domain.</p>

<p>In the <code>init_daemon_domain(dhcp)</code> line, the policy states DHCP is spawned from <code>init</code> and is allowed to communicate with it.</p>

<p>In the <code>net_domain(dhcp)</code> line, the policy allows DHCP to use common network functionality from the <code>net</code> domain such as reading and writing TCP packets, communicating over sockets, and conducting DNS requests.</p>

<p>In the line <code>allow dhcp proc_net:file write;</code>, the policy states DHCP can write to specific files in <code>/proc</code>. This line demonstrates SELinux’s fine-grained file labeling. It uses the <code>proc_net</code> label to limit write access to only the files under <code>/proc/sys/net</code>.</p>

<p>The final block of the example starting with <code>allow dhcp netd:fd use;</code> depicts how applications may be allowed to interact with one another. The
policy says DHCP and netd may communicate with one another via file
descriptors, FIFO files, datagram sockets, and UNIX stream sockets. DHCP may
only read to and write from the datagram sockets and UNIX stream sockets and
not create or open them.</p>

<h2 id=available_controls>Available controls</h2>

<table>
 <tr>
    <td>
<p><strong>Class</strong></p>
</td>
    <td>
<p><strong>Permission</strong></p>
</td>
 </tr>
 <tr>
    <td>
<p>file</p>
</td>
    <td>
<pre>
ioctl read write create getattr setattr lock relabelfrom relabelto append
unlink link rename execute swapon quotaon mounton</pre>
</td>
 </tr>
 <tr>
 <td>
<p>directory</p>
</td>
 <td>
<pre>
add_name remove_name reparent search rmdir open audit_access execmod</pre>
</td>
 </tr>
 <tr>
 <td>
<p>socket</p>
</td>
 <td>
<pre>
ioctl read write create getattr setattr lock relabelfrom relabelto append bind
connect listen accept getopt setopt shutdown recvfrom sendto recv_msg send_msg
name_bind</pre>
</td>
 </tr>
 <tr>
 <td>
<p>filesystem</p>
</td>
 <td>
<pre>
mount remount unmount getattr relabelfrom relabelto transition associate
quotamod quotaget</pre>
 </td>
 </tr>
 <tr>
 <td>
<p>process</p>
 </td>
 <td>
<pre>
fork transition sigchld sigkill sigstop signull signal ptrace getsched setsched
getsession getpgid setpgid getcap setcap share getattr setexec setfscreate
noatsecure siginh setrlimit rlimitinh dyntransition setcurrent execmem
execstack execheap setkeycreate setsockcreate</pre>
</td>
 </tr>
 <tr>
 <td>
<p>security</p>
</td>
 <td>
<pre>
compute_av compute_create compute_member check_context load_policy
compute_relabel compute_user setenforce setbool setsecparam setcheckreqprot
read_policy</pre>
</td>
 </tr>
 <tr>
 <td>
<p>capability</p>
</td>
 <td>
<pre>
chown dac_override dac_read_search fowner fsetid kill setgid setuid setpcap
linux_immutable net_bind_service net_broadcast net_admin net_raw ipc_lock
ipc_owner sys_module sys_rawio sys_chroot sys_ptrace sys_pacct sys_admin
sys_boot sys_nice sys_resource sys_time sys_tty_config mknod lease audit_write
audit_control setfcap</pre>
</td>
 </tr>
 <tr>
 <td>
<p><strong>MORE</strong></p>
</td>
 <td>
<p><strong>AND MORE</strong></p>
</td>
 </tr>
</table>

<h2 id=neverallow>neverallow rules</h2>

<p>SELinux <code>neverallow</code> rules prohibit behavior that should never occur.
With <a href="{@docRoot}compatibility/index.html">compatibility</a> testing,
SELinux <code>neverallow</code> rules are now enforced across partner devices.</p>

<p>The following guidelines are intended to help manufacturers avoid errors
related to <code>neverallow</code> rules during customization. The rule numbers
used here correspond to Android 5.1 and are subject to change by release.</p>

<p>Rule 48: <code>neverallow { domain -debuggerd -vold -dumpstate
-system_server } self:capability sys_ptrace;</code><br>
See the man page for <code>ptrace</code>.  The <code>sys_ptrace</code>
capability grants the ability to <code>ptrace</code> any process, which allows a great deal
of control over other processes and should belong only to designated system
components, outlined in the rule.  The need for this capability often indicates
the presence of something that is not meant for user-facing builds or
functionality that isn’t needed. Remove the unnecessary component.</p>

<p>Rule 76: <code>neverallow { domain -appdomain -dumpstate -shell -system_server -zygote } { file_type -system_file -exec_type }:file execute;</code><br>
This rule is intended to prevent the execution of arbitrary code on the system.
Specifically, it asserts that only code on <code>/system</code> gets executed,
which allows security guarantees thanks to mechanisms such as verified boot.
Often, the best solution when encountering a problem with this
<code>neverallow</code> rule is to move the offending code to the
<code>/system</code> partition.</p>